BOOM ARM MOWER PARTS MANUAL. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Alamo Group Inc.

Transcription

1 Rev Effective S/N Current BOOM ARM MOWER Part No P PARTS MANUAL ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Alamo Group Inc.

2

3 TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! DANGER FAILING TO FOLLOW SAFETY MESSAGES AND OPERATING INSTRUCTIONS CAN CAUSE SERIOUS BODILY INJURY OR EVEN DEATH TO OPERATOR AND OTHERS IN THE AREA. 1. READ MANUAL 2. NO RIDERS, NO CHILDREN OPERATORS. 3. USE SAFETY SHOES,HARD HAT, SAFETY GLASSES, SEAT BELTS, & ROPS. 4. BLOCK UP SECURELY BEFORE WORKING UNDER. RED 1. Study and understand Operator's Manuals, Safety Signs, and Instructional Decals for tractor & flail mower to prevent misuse, abuse, & accidents. Practice before operating mower in a confined area or near passersby. Learn how to stop engine suddenly in an emergency. Be alert for passersby and especially children. 2. Allow no children on or near implement of tractor. Allow no riders on tractor or implement. Falling off can cause serious injury or death from being runover by tractor or mower or contact with Flail Mower Blades. 3. Operate only with tractor having Roll-Over Protective Structure (ROPS) and with seatbelt fastened securely and snugly to prevent injury and possible death from falling off or tractor overturn. Personal Protective Equipment such as Hard Hat, Safety Glasses, Safety Shoes, and Ear Plugs are recommended. 4. Block up or support raised machine and all lifted components securely before putting hands or feet under or working underneath any lifted component to prevent crushing injury or death from sudden dropping or inadvertent operation of controls. Make certain that area is clear before lowering or folding. 5. Before transporting, put Lift Lever in detent or full-lift position. Install Transport Safety Devices securely on folding implements. Slowdown when turning and on hillsides. Install * Restrictor in folding circuit to slow down lowering and unfolding if action is faster than is desirable. 6. Make certain that SMV sign, Warning Lights, and Reflectors are clearly visible. Follow local traffic codes. 7. Never operate with Flail Mower or Folding Section raised if passersby, bystandards or traffic are in the area to reduce possibility of injury or death from objects thrown by Blades under Shields or implement structure. 8. Before dismounting, secure flail mower in transport position or lower to ground. Put tractor in park or set brake, disengage PTO, stop engine, remove key, and wait until noise of rotation has ceased to prevent entanglement in rotating parts which may cause injury or death. Never mount or dismount a moving vehicle. Crushing from runover may cause injury or death. 5. TRANSPORT SAFELY, 6. USE SMV, LIGHTS, & LOCK UP. REFLECTORS. * RED 7. DO NOT OPERATE WITH MOWER OR WING RAISED. 8. DO NOT MOUNT OR DISMOUNT WHILE MOVING WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause catastrophic failure with possible injury or death.

4 Parts Section 1 PARTS SECTION

5 PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered. 3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part. 4. The Manufacturer reserves the right to substitute parts where applicable. 5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order. 6. The Manufacturer reserves the right to change prices without prior notice. NOTE: Please refer to The Safety Section in the front of this Manual for the proper Part Number when ordering Replacement Safety Decals. For maximum safety and to guarantee optimum product reliability, always use genuine Servis-Rhino Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to: ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas Alamo Group Inc. Parts Section 2

6 PART NAME INDEX 50 IN BLADE CARRIER ASY (PAN) - PN IN HEAD ASY (PART 1) IN HEAD ASY (PART 2) IN MOTOR & SPINDLE ASY IN MOTOR ASY - PARTS - PN (PART 1) IN MOTOR ASY - PARTS - PN (PART 2) IN SPINDLE ASY - PN B IN BLADE CARRIER ASY (BAR) - PN IN DOOR CYL ASY - PN A IN HEAD ASY - SN & DOWN IN HEAD ASY - SN & UP IN HEAD SUB-ASY - SN & DOWN IN HEAD SUB-ASY - SN & UP IN MOTOR ASY - PARTS - PN SN & UP (PART 1) IN MOTOR ASY - PARTS - PN SN & UP (PART 2) IN SPINDLE ASY - PN A BOOM ASY - 17 FT (OPT ALLOY STEEL) - PN BOOM ASY - 17 FT (STD STEEL) - PN BOOM ASY - 21 FT (STD & ALLOY STEEL) (PART 1) BOOM ASY - 21 FT (STD & ALLOY STEEL) (PART 2) BOOM ASY - 24 FT (STD & ALLOY STEEL) (PART 1) BOOM ASY - 24 FT (STD & ALLOY STEEL) (PART 2) BOOM HOSE SCHEMATIC - 17 FT BOOM ARM BOOM HOSE SCHEMATIC - 21 FT BOOM ARM BOOM HOSE SCHEMATIC - 24 FT BOOM ARM BUZZ BAR - HYD MOTOR PARTS - P/N BUZZ BAR ASY - 48 IN - GEN 1 (PART 1) BUZZ BAR ASY - 48 IN - GEN 1 (PART 2) BUZZ BAR ASY - 48 IN - GEN 1 (PART 3) BUZZ BAR ASY - 48 IN - GEN 2 (PART 1) BUZZ BAR ASY - 48 IN - GEN 2 (PART 2) BUZZ BAR ASY - 69 IN - GEN 1 (PART 1) BUZZ BAR ASY - 69 IN - GEN 1 (PART 2) BUZZ BAR ASY - 69 IN - GEN 1 (PART 3) BUZZ BAR ASY - 69 IN - GEN 2 (PART 1) BUZZ BAR ASY - 69 IN - GEN 2 (PART 2) BUZZ BAR ASY - 90 IN - GEN 1 (PART 1) BUZZ BAR ASY - 90 IN - GEN 1 (PART 2) BUZZ BAR ASY - 90 IN - GEN 1 (PART 3) BUZZ BAR ASY - 90 IN - GEN 2 (PART 1) Alamo Group Inc. Parts Section -3

7 PART NAME INDEX BUZZ BAR ASY - 90 IN - GEN 2 (PART 2) BUZZ BAR SPINDLE ASY - SN BB DITCHER - BLADE CARRIER ASY DITCHER - HOUSING ASY DITCHER - SPINDLE ASY DITCHER BLADE HEAD ASY - ROUGH CUT DITCHER HEAD ASY - (NEW STYLE) DITCHER HEAD ASY - (OLD STYLE) DITCHER HEAD DEFLECTOR CYLINDER FILTER ASY - PN FILTER ASY - PN FLAIL AXE - DOOR CYL ASY - PN A FLAIL AXE - HEAD ASY (PART 1) FLAIL AXE - HEAD ASY (PART 2) FLAIL AXE - HOSE CONNECTIONS FLAIL AXE - ROTOR W/KNIVES FML100H FLAIL - HEAD ASY (PART 1) FML100H FLAIL - HEAD ASY (PART 2) FML100H FLAIL - HEAD ASY (PART 3) FML100H FLAIL - SPINDLE ASY - PN GRASS FLAIL - CUTTERSHAFT ASY GRASS FLAIL - CUTTERSHAFT BRGS GRASS FLAIL - HEAD ASY GRASS FLAIL - HEAD SUB-ASY GRASS FLAIL - PULLEY ASY GRASS FLAIL - ROLLER ASY HIGH FRAME ASY - 2 WD & 4 WD HYD CYL ASY - DIPPER - PN A (21 & 24 FT) HYD CYL ASY - DIPPER - PN (17 FT) HYD CYL ASY - LIFT - PN A HYD CYL ASY - SWING - PN A HYD CYL ASY - TILT - PN A HYD LOCK VALVE SOLENOID ASY - PN (OLD STYLE) HYD LOCK VALVE SOLENOID ASY - PN A (NEW STYLE) HYD TANK ASY - PN (OCFD) & PN (CCLS) HYD TANK SUB-ASY - PN JOYSTICK CONSOLE ASY KING POST SUB-ASY MOUNTING COMPONENTS - COMMON BOX (PART 1) Alamo Group Inc. Parts Section -4

8 PART NAME INDEX MOUNTING COMPONENTS - COMMON BOX (PART 2) MOUNTING COMPONENTS - COMMON BOX (PART 3) PUMP ASY - SERVO CONTROLED - PN A (PART 1) PUMP ASY - SERVO CONTROLED - PN A (PART 2) TIMBERCAT - HEAD ASY (PART 1) TIMBERCAT - HEAD ASY (PART 2) VALVE - PARTS - OPEN & CLOSED CENTER VALVE ASY - 5 SPOOL (CCLS) VALVE ASY - 5 SPOOL (OCFD) Alamo Group Inc. Parts Section -5

9 50 IN BLADE CARRIER ASY (PAN) - PN BLADE / SPIDER PAN ASY SPIDER PAN SUB-ASY (W/ ITEMS 7,8,9 & 10) BLADE SET, MATCHED SET OF BLADE BOLT WASHER, SPECIAL ( HARDENED ) ROLL PIN SLOTTED HEX NUT, 1-1/8"-NF PL GR LOCKNUT, 1"-NC PLB FLATWASHER, 1-1/32" X 2-3/16" X.22" SPACER 10 7A BOLT, HEX HEAD 1"-NC X 3"PL GR LOCKWASHER, 3/4" PL HEAVY BOLT, SOCKET HEAD 3/4"-NC X 2-1/2" PL GR KEY BUSHING SPACER 2008 Alamo Group Inc. Parts Section -6

10 50 IN HEAD ASY (PART 1) 2008 Alamo Group Inc. Parts Section -7

11 50 IN HEAD ASY (PART 1) Continued " X-FRAME SQUARE HEAD ASY DECK WLD`MT, 50" SQ. HEAD HITCH POST, 4 BAR 2A HITCH POST ADAPTER WLD`MT BOLT LOCKNUT MOTOR & SPINDLE ASY BOLT A 1 CYLINDER ASY, DOOR PIN, 5/8" X 2-1/2" DRILLED PIN, DRILLED COVER PLATE 11 5F WINGNUT DOOR WLD`MT, 50" SQ HEAD COTTER PIN FLAP DEFLECTOR, DOOR FLAP DEFLECTOR, DOOR BOLT FLATWASHER LOCKNUT FLAP DEFLECTOR, REAR SIDE GUARD REAR FLAP RETAINER BOLT WOOD WASHER BLADE PAN ASY LOCKWASHER BOLT, SOCKET HEAD B 1 SPINDLE ASY GASKET PLASTIC TIE, YELLOW PLASTIC TIE, YELLOW / WHITE ADAPTER, ELBOW SKID SHOE, RH SIDE SKID SHOE, LH SIDE HOSE, 88" LONG HOSE, 80" LONG PLASTIC TIE, RED PLASTIC TIE, BLUE PLASTIC TIE, ORANGE HOSE, 60" LONG - W/ RED TIE 2008 Alamo Group Inc. Parts Section -8

12 50 IN HEAD ASY (PART 2) 2008 Alamo Group Inc. Parts Section -9

13 50 IN HEAD ASY (PART 2) Continued HOSE, 68" LONG - W/ ORANGE TIE HOSE, 60" LONG - W/ BLUE TIE BOLT, FLAT SOCKET HEAD COUNTER SUNK HEAD BOLT, HEX HEAD RUBBER FLAP, 7-1/8" X 13-1/4" BOLT 2008 Alamo Group Inc. Parts Section -10

14 50 IN MOTOR & SPINDLE ASY 2008 Alamo Group Inc. Parts Section -11

15 50 IN MOTOR & SPINDLE ASY Continued MOTOR & SPINDLE ASY, F/ 50" ROTARY HEAD MOTOR ASY, PISTON TYPE MOTOR B 1 SPINDLE ASY, SPLINED TYPE GASKET, F/ MOTOR TO SPINDLE FLANGE HALF ADAPTER, STRAIGHT O-RING ADAPTER, STRAIGHT BOLT LOCKWASHER BOLT LOCKWASHER 2008 Alamo Group Inc. Parts Section -12

16 50 IN MOTOR ASY - PARTS - PN (PART 1) 2008 Alamo Group Inc. Parts Section -13

17 50 IN MOTOR ASY - PARTS - PN (PART 1) Continued MOTOR ASY, PISTON TYPE BARREL HOUSING ASY VALVE PLATE (IN ITEM 39) NOZZLE PLUG ASY, HEXAGON BEARING HOUSING O-RING (IN ITEM 39 & 40) O-RING (IN ITEM 39 & 40) SEAL CARRIER SHAFT SEAL (IN ITEM 39 & 40) SPACER WASHER RETAINING RING RETAINING RING SHAFT ASY CYLINDER BARREL (IN ITEM 39) BARREL SUPPORT PISTON ASY (IN ITEM 39) RISTON RING RING GEAR BEARING ASY, CUP & CONE BEARING ASY, CUP & CONE SPACER WASHER RETAINING RING SHIM,.020" (0.5) SHIM,.007" (0.2) SHIM,.015" (0.4) SHIM,.023" (0.6) SHIM,.030" (0.8) SHIM,.039" (1.0) SHIM,.027" (0.7) BOLT, SOCKET HEAD LOCKWASHER M13 X GUIDE PIN RELIEF MANIFOLD SEAL KIT, F/ RELIEF VALVE RELIEF VALVE, 4061 PSI (280 BAR) RELIEF VALVE, 4786 PSI (330 BAR) O-RING FLAT KEY BALL PLUG, HEXAGON 2008 Alamo Group Inc. Parts Section -14

18 50 IN MOTOR ASY - PARTS - PN (PART 2) 2008 Alamo Group Inc. Parts Section -15

19 50 IN MOTOR ASY - PARTS - PN (PART 2) Continued O-RING PLUG ASY PLUG ASY PLUG ASY REBUILD KIT (ITEMS 2,7,8,10,15 & 17) SEAL KIT (ITEMS 7,8 &10) 2008 Alamo Group Inc. Parts Section -16

20 50 IN SPINDLE ASY - PN B B - SPINDLE & HOUSING ASY HOUSING SPINDLE BEARING RING SEAL SNAP RING BEARING ASY, CUP & CONE BEARING ASY, CUP & CONE NUT GREASE RELIEF FITTING GREASE FITTING 2008 Alamo Group Inc. Parts Section -17

21 60 IN BLADE CARRIER ASY (BAR) - PN BLADE BAR ASY NUT ROLL PIN FLATWASHER BLADE SET, MATCHED SET OF BLADE BAR LEAF, TOP LEAF BLADE BAR LEAF, MIDDLE LEAF BLADE BAR LEAF, BOTTOM LEAF BOLT, LONG BOLT BOLT, SHORT BOLT BLADE BOLT LOCKWASHER LOCKWASHER, 3/4" PL HEAVY BOLT, SOCKET HEAD 3/4"-NC X 4" PL GR BLADE BOLTS, NUTS, ROLLPIN KIT (INCLUDES 2 EACH OF ITEMS 1, 2, & 10) 2008 Alamo Group Inc. Parts Section -18

22 60 IN DOOR CYL ASY - PN A A - DOOR CYLINDER ASY 1 5JRC LOCKNUT PISTON ROD WLD`MT TUBE / BARRELL WLD`MT CYLINDER HEAD 6 * SEAL KIT 1 ROD WIPER SEAL (IN ITEM 12) 7 * SEAL KIT 1 ROD SEAL (IN ITEM 12) 8 * SEAL KIT 1 O-RING (IN ITEM 12) 9 * SEAL KIT 1 SEAL (IN ITEM 12) 10 * SEAL KIT 1 PISTON SEAL (IN ITEM 12) O-RING F/ O-RING BOSS FITTING SEAL KIT (ITEMS 6 THRU 10) 2008 Alamo Group Inc. Parts Section -19

23 THIS PAGE INTENTIONAL LEFT BLANK 2008 Alamo Group Inc. Parts Section -20

24 60 IN HEAD ASY - SN & DOWN 2008 Alamo Group Inc. Parts Section -21

25 60 IN HEAD ASY - SN & DOWN Continued ROTARY HEAD ASY, 60" W/ BAR CARRIER (NON-SALABLE) FLATWASHER LOCKNUT BOLT COTTER PIN BOLT 8 NFS 1 SERIAL NUMBER PLATE SLOTTED NUT BOLT FLAP HOLD DOWN BAR SHIELD, DEBRIS DEFLECTOR HEX WRENCH, SPECIAL PIN REAR FLAP REAR CLAMP BAR PIN ADAPTER, ELBOW CYLINDER ASY PIN WLD`MT PIN DOOR ROD, HINGE PLASTIC TIE, YELLOW PLASTIC TIE, YELLOW / WHITE ROTARY HEAD SUB-ASY, 60" (NON-SALABLE) DECALS, (SEE SAFETY SECTION) HOSE, (LARGE) - W/ RED TIE - PRESSURE HOSE HOSE, (LARGE) - W/ ORANGE TIE - RETURN HOSE HOSE, (LARGE) - W/ BLUE TIE - CASE DRAIN HOSE, (SMALL) - W/ YELLOW / WHITE - DOOR CYL HOSE, (SMALL) - W/ YELLOW TIE - DOOR CYL PLASTIC TIE, RED PLASTIC TIE, BLUE PLASTIC TIE, ORANGE WASHER METAL TACK S 1 ROLL PIN COTTER PIN 2008 Alamo Group Inc. Parts Section -22

26 60 IN HEAD ASY - SN & UP 2008 Alamo Group Inc. Parts Section -23

27 60 IN HEAD ASY - SN & UP Continued ROTARY HEAD ASY, 60" W/BAR CARRIER (NON-SALABLE) FLATWASHER LOCKNUT BOLT COTTER PIN BOLT PLATE, ALAMO S/N NUT BOLT FLAP HOLD DOWN BAR SHIELD, DEBRIS DEFLECTOR HEX WRENCH, MODIFIED PIN, 2-1/2" LONG REAR FLAP, 10" HIGH X 63" LONG REAR CLAMP BAR PIN, 2" LONG ADAPTER, ELBOW CYLINDER ASY, DOOR PIN WLD`MT, 11-1/2" LONG PIN, 9" LONG DOOR WLD`MT ROD, HINGE PLASTIC TIE, YELLOW PLASTIC TIE, YELLOW & WHITE " SQ. HD SUB-ASY DECAL KIT HOSE, # 16 W/ RED PLASTIC TIE HOSE, # 16 W/ ORANGE PLASTIC TIE HOSE, # 16 W/ BLUE PLASTIC TIE HOSE, # 4 W/ YELLOW & WHITE PLASTIC TIE HOSE, # 4 W/ YELLOW PLASTIC TIE PLASTIC TIE, RED PLASTIC TIE, BLUE PLASTIC TIE, ORANGE WASHER, NARROW METAL TACK S 2 ROLL PIN BOLT COTTER PIN 2008 Alamo Group Inc. Parts Section -24

28 60 IN HEAD SUB-ASY - SN & DOWN 2008 Alamo Group Inc. Parts Section -25

29 60 IN HEAD SUB-ASY - SN & DOWN Continued ROTARY HEAD SUB-ASY, 60" (NON-SALABLE) LOCKWASHER LOCKNUT LOCKNUT BOLT NUT BOLT BLADE BAR ASY BOLT SKID SHOE DECK HEAD HITCH POST BOLT, SOCKET HEAD FLATWASHER, HARDENED SPECIAL 15 15B WASHER 16 W67 16 WASHER LOCKWASHER HYDRAULIC FITTING, ELBOW SPLIT FLANGE KIT HYDRAULIC FITTING, ELBOW ADAPTER, HYD, STRAIGHT GASKET, SPINDLE / MOTOR B 1 MOTOR ASY A 1 SPINDLE HOUSING MOTOR PLATE TIE ROD NUT SEAL KIT, VALVE BLOCK TO MOTOR CARTRIDGE, RELIEF (4000 PSI) 32A O-RING 32B O-RING 32C O-RING 32D BACK-UP RING GASKET, END COVER MOTOR SEAL KIT 2008 Alamo Group Inc. Parts Section -26

30 60 IN HEAD SUB-ASY - SN & UP 2008 Alamo Group Inc. Parts Section -27

31 60 IN HEAD SUB-ASY - SN & UP Continued ROTARY HEAD ASY. W/ BAR CARRIER (NON SALABLE) LOCKWASHER LOCKNUT LOCKNUT BOLT O-RING BOLT BLADE BAR ASY BOLT SKID SHOE DECK HEAD WLD`MT HITCH POST WLD`MT BOLT WASHER, HARDENED 15 15B WASHER BOLT LOCKWASHER ADAPTER, STRAIGHT FLANGE HALF BOLT ADAPTER, HYD GASKET, SPINDLE TO MOTOR MOTOR ASY, PISTON TYPE A 1 SPINDLE HOUSING, SPLINED LOCKWASHER 2008 Alamo Group Inc. Parts Section -28

32 60 IN MOTOR ASY - PARTS - PN SN & UP (PART 1) 2008 Alamo Group Inc. Parts Section -29

33 60 IN MOTOR ASY - PARTS - PN SN & UP (PART 1) Continued MOTOR ASY, PISTON TYPE BARREL HOUSING ASY VALVE PLATE (IN ITEM 39) NOZZLE PLUG 2.5MM PLUG ASY, HEXAGON BEARING HOUSING O-RING (IN ITEM 39 & 40) O-RING (IN ITEM 39 & 40) SEAL CARRIER SHAFT SEAL (IN ITEM 39 & 40) SPACER WASHER RETAINING RING RETAINING RING SHAFT ASY CYLINDER BARREL (IN ITEM 39) BARREL SUPPORT PISTON ASY (IN ITEM 39) RISTON RING RING GEAR BEARING ASY, CUP & CONE BEARING ASY, CUP & CONE SPACER WASHER RETAINING RING SHIM,.020" (0.5) SHIM,.007" (0.2) SHIM,.015" (0.4) SHIM,.023" (0.6) SHIM,.030" (0.8) SHIM,.039" (1.0) SHIM,.027" (0.7) BOLT, SOCKET HEAD SAFETY VALVE GUIDE PIN RELIEF MANIFOLD SEAL KIT, F/ RELIEF VALVE RELIEF VALVE, 4061 PSI (280 BAR) RELIEF VALVE, 4786 PSI (330 BAR) O-RING FLAT KEY BALL PLUG, HEXAGON 2008 Alamo Group Inc. Parts Section -30

34 60 IN MOTOR ASY - PARTS - PN SN & UP (PART 2) 2008 Alamo Group Inc. Parts Section -31

35 60 IN MOTOR ASY - PARTS - PN SN & UP (PART 2) Continued O-RING PLUG ASY PLUG ASY PLUG ASY REBUILD KIT (ITEMS 2,7,8,10,15 & 17) SEAL KIT (ITEMS 7,8 &10) 2008 Alamo Group Inc. Parts Section -32

36 60 IN SPINDLE ASY - PN A SPINDLE ASY, F/ 60" ROTARY HEAD SPINDLE SHAFT SPINDLE HOUSING LOWER BEARING ASY, CUP & CONE UPPER BEARING ASY, CUP & CONE NUT 2008 Alamo Group Inc. Parts Section -33

37 60 IN SPINDLE ASY - PN A Continued TANG WASHER SEAL RELIEF PLUG GREASE FITTING 2008 Alamo Group Inc. Parts Section -34

38 BOOM ASY - 17 FT (OPT ALLOY STEEL) - PN Alamo Group Inc. Parts Section -35

39 BOOM ASY - 17 FT (OPT ALLOY STEEL) - PN Continued BOOM ARM ASY, ALLOY STEEL OPTIONAL LIFT SECTION WLD`MT, ALLOY STEEL OPTIONAL DIPPER SECTION WLD`MT, ALLOY STEEL OPTIONAL CYLINDER ASY, DIPPER HYDRAULIC TUBE, F/ 17 FT HYDRAULIC TUBE, F/ 17 FT HYDRAULIC TUBE, F/ 17 FT BUSHING, TEFLON CYLINDER & BEARING ASY, TILT CYL LINK ARM MACHINED LINKAGE ARM & BUSHING ASY ADAPTER, HYD CAP, HYD (4FJ) PIN WLD`MT, 12" LG PIN, CHROME 1-1/2" X 9-9/16" LG PIN, CHROME 1-1/2" X 8-5/16" LG PIN, CHROME 1-1/2" X 6-11/16" LG PIN, CHROME 1-1/2" X 7-9/16" LG PIN, CHROME 1-1/2" X 5-3/16" LG PIN WLD`MT, 14-15/16" LG COVER, HYD TUBE CLAMP, HYD TUBE BOLT CYLINDER ROD GUARD ASY CLAMP, TUBE 1 - POSITION HYDRAULIC TUBE, F/ 17 FT BOLT SLOTTED NUT FLATWASHER COTTER PIN LOCKNUT ADAPTER, HYD FLATWASHER BOLT PLASTIC TIE, BLUE PLASTIC TIE, RED PLASTIC TIE, ORANGE HYDRAULIC TUBE, F/ 17 FT HYDRAULIC TUBE, F/ 17 FT 2008 Alamo Group Inc. Parts Section -36

40 BOOM ASY - 17 FT (STD STEEL) - PN Alamo Group Inc. Parts Section -37

41 BOOM ASY - 17 FT (STD STEEL) - PN Continued BOOM ASY, 17 FT. (STD STEEL) LIFT SECTION WLD`MT (STD STEEL) DIPPER SECTION WLD`MT (STD STEEL) CYLINDER ASY, DIPPER HYDRAULIC TUBE, F/ 17 FT HYDRAULIC TUBE, F/ 17 FT HYDRAULIC TUBE, F/ 17 FT BUSHING, TEFLON CYLINDER & BEARING ASY, TILT LINK ARM, MACHINED LINKAGE ARM & BUSHING ASY ADAPTER, HYDRAULIC CAP, HYDRAULIC (4FJ) PIN WLD`MT, 12" LG PIN, CHROME 1-1/2" X 9-9/16" LG PIN, CHROME 1-1/2" X 8-5/16" LG PIN, CHROME 1-1/2" X 6-11/16" LG PIN, CHROME 1-1/2" X 7-9/16" LG PIN, CHROME 1-1/2" X 5-3/16" LG PIN WLD`MT, 14-15/16" LG COVER, HYD TUBE CLAMP, HYD TUBE BOLT CYLINDER ROD GUARD ASY HYDRAULIC TUBE, 17 FT CLAMP, TUBE 1 - POSITION HYDRAULIC TUBE, F/ 17 FT HYDRAULIC TUBE, F/ 17 FT BOLT SLOTTED NUT FLATWASHER COTTER PIN LOCKNUT ADAPTER, HYD FLATWASHER BOLT PLASTIC TIE, BLUE PLASTIC TIE, RED PLASTIC TIE, ORANGE 2008 Alamo Group Inc. Parts Section -38

42 BOOM ASY - 21 FT (STD & ALLOY STEEL) (PART 1) 2008 Alamo Group Inc. Parts Section -39

43 BOOM ASY - 21 FT (STD & ALLOY STEEL) (PART 1) Continued BOOM ARM ASY, W/ STD STEEL BOOM BOOM ARM ASY, W/ ALLOY STEEL BOOM FLATWASHER COTTER PIN BOLT BOLT SLOTTED NUT BOLT DIPPER SECTION WLD`MT, F/ STD STEEL BOOM DIPPER SECTION WLD`MT, F/ ALLOY STEEL BOOM LINK ARM WLD`MT PIN, CHROME 1-1/2" X 5-3/16" LONG PIN, CHROME 1-1/2" X 8-5/16" LONG PIN, CHROME 1-1/2" X 7-9/16" LONG PIN, CHROME 1-1/2" X 6-11/16" LONG PIN WLD`MT, 14-15/16" LONG PIN WLD`MT, 12" LONG PIN, CHROME 1-1/2" X 9-9/16" LONG HYDRAULIC TUBE, DIPPER SECTION (RED TIE) HYDRAULIC TUBE, DIPPER SECTION (ORANGE TIE) HYDRAULIC TUBE, DIPPER SECTION (BLUE TIE) HYDRAULIC TUBE, LIFT SECTION (RED TIE) HYDRAULIC TUBE, LIFT SECTION (ORANGE TIE) HYDRAULIC TUBE, LIFT SECTION (BLUE TIE) COVER PLATE LIFT SECTION WLD`MT, F/ STD STEEL BOOM LIFT SECTION WLD`MT, F/ ALLOY STEEL BOOM DIPPER CYLINDER ASY BUSHING, TEFLON LINKAGE ARM ASY, W/ BUSHINGS BUSHING, TEFLON (INCLUDED IN LINKAGE ARM ASY) TILT CYLINDER ASY CLAMP TUBE CLAMP WASHER CYLINDER GUARD BULK HEAD FITTING ADAPTER ELBOW, 45 DEG BULK HEAD CAP NUT LOCKNUT PLASTIC TIE, RED 2008 Alamo Group Inc. Parts Section -40

44 BOOM ASY - 21 FT (STD & ALLOY STEEL) (PART 2) 2008 Alamo Group Inc. Parts Section -41

45 BOOM ASY - 21 FT (STD & ALLOY STEEL) (PART 2) Continued PLASTIC TIE, BLUE PLASTIC TIE, ORANGE BOLT COVER 2008 Alamo Group Inc. Parts Section -42

46 BOOM ASY - 24 FT (STD & ALLOY STEEL) (PART 1) 2008 Alamo Group Inc. Parts Section -43

47 BOOM ASY - 24 FT (STD & ALLOY STEEL) (PART 1) Continued BOOM ARM ASY, F/ STD STEEL BOOM BOOM ARM ASY, F/ ALLOY STEEL BOOM FLATWASHER COTTER PIN BOLT BOLT SLOTTED NUT BOLT DIPPER SECTION WLD`MT, F/ STD STEEL BOOM DIPPER SECTION WLD`MT, F/ ALLOY STEEL BOOM LINK ARM WLD`MT PIN, CHROME 1-1/2" X 5-3/16" LG PIN, CHROME 1-1/2" X 8-5/16" LG PIN, CHROME 1-1/2" X 7-9/16" LG PIN, CHROME 1-1/2" X 6-11/16" LG PIN WLD`MT, 14-15/16" LG PIN WLD`MT, 12" LG PIN, CHROME 1-1/2" X 9-9/16" LG HYDRAULIC TUBE, DIPPER SECTION (RED TIE) HYDRAULIC TUBE, DIPPER SECTION (ORANGE TIE) HYDRAULIC TUBE, DIPPER SECTION (BLUE TIE) HYDRAULIC TUBE, LIFT SECTION (RED TIE) HYDRAULIC TUBE, LIFT SECTION (ORANGE TIE) HYDRAULIC TUBE, LIFT SECTION (BLUE TIE) COVER PLATE LIFT SECTION WLD`MT, F/ STD STEEL BOOM LIFT SECTION WLD`MT, F/ ALLOY STEEL BOOM DIPPER CYLINDER ASY BUSHING, TEFLON LINKAGE ARM ASY, W/ BUSHINGS BUSHING, TEFLON (INCLUDED IN LINKAGE ARM ASY) TILT CYLINDER ASY CLAMP TUBE CLAMP WASHER CYLINDER GUARD BULK HEAD FITTING ADAPTER ELBOW, 45 DEG BULK HEAD CAP NUT LOCKNUT PLASTIC TIE, RED 2008 Alamo Group Inc. Parts Section -44

48 BOOM ASY - 24 FT (STD & ALLOY STEEL) (PART 2) 2008 Alamo Group Inc. Parts Section -45

49 BOOM ASY - 24 FT (STD & ALLOY STEEL) (PART 2) Continued PLASTIC TIE, BLUE PLASTIC TIE, ORANGE BOLT COVER 2008 Alamo Group Inc. Parts Section -46

50 BOOM HOSE SCHEMATIC - 17 FT BOOM ARM 2008 Alamo Group Inc. Parts Section -47

51 BOOM HOSE SCHEMATIC - 17 FT BOOM ARM Continued BOOM ARM ASY, F/ STD STEEL BOOM BOOM ARM ASY, F/ ALLOY STEEL BOOM PLASTIC TIE HOSE, 134" (SMALL) W/ YELLOW / WHITE TIE HOSE, 134" (SMALL) W/ YELLOW TIE HOSE SLEEVING, 48" LG HOSE, 60" (SMALL) W/ YELLOW / WHITE TIE HOSE, 60" (SMALL) W/ YELLOW TIE HOSE SLEEVING, 54" LG HOSE, (LARGE) - W/ RED TIE HOSE, (LARGE) - W/ BLUE TIE HOSE, (LARGE) - W/ ORANGE TIE HOSE, (MEDIUM) - W/ BLUE TIE HOSE, (MEDIUM) - W/ BLUE / WHITE TIE HOSE, (MEDIUM) - W/ RED TIE HOSE, (MEDIUM) - W/ RED / WHITE TIE RUBBER GROMMET HOSE SLEEVING, 36" LG CAP NUT, F/ SHIPPING ONLY HOSE SLEEVING, 2-1/2" ID X 36" LG 2008 Alamo Group Inc. Parts Section -48

52 BOOM HOSE SCHEMATIC - 21 FT BOOM ARM 2008 Alamo Group Inc. Parts Section -49

53 BOOM HOSE SCHEMATIC - 21 FT BOOM ARM Continued BOOM ARM ASY, STD STEEL (OPTIONAL) BOOM ARM ASY, ALLOY STEEL (OPTIONAL) PLASTIC TIE HOSE, 184" (SMALL) - W/ YELLOW / WHITE TIE HOSE, 184" (SMALL) - W/ YELLOW TIE HOSE SLEEVING, 48" LG HOSE, 60" (SMALL) - W/ YELLOW / WHITE TIE HOSE, 60" (SMALL) - W/ YELLOW TIE HOSE SLEEVING, 54" LG HOSE, (LARGE) - W/ RED TIE HOSE, (LARGE) - W/ BLUE TIE HOSE, (LARGE) - W/ ORANGE TIE HOSE, (MEDIUM) - W/ BLUE TIE HOSE, (MEDIUM) - W/ BLUE / WHITE TIE HOSE, (MEDIUM) - W/ RED TIE HOSE, (MEDIUM) - W/ RED / WHITE TIE RUBBER GROMMET HOSE SLEEVING CAP NUT, F/ SHIPPING ONLY 2008 Alamo Group Inc. Parts Section -50

54 BOOM HOSE SCHEMATIC - 24 FT BOOM ARM 2008 Alamo Group Inc. Parts Section -51

55 BOOM HOSE SCHEMATIC - 24 FT BOOM ARM Continued BOOM ARM ASY, STD STEEL (OPTIONAL) BOOM ARM ASY, ALLOY STEEL (OPTIONAL) PLASTIC TIE HOSE, 184" (SMALL) - W/ YELLOW / WHITE TIE HOSE, 184" (SMALL) - W/ YELLOW TIE HOSE SLEEVING, 48" LG HOSE, 120" (SMALL) - W/ YELLOW / WHITE TIE HOSE, 120" (SMALL) - W/ YELLOW TIE HOSE SLEEVING, 54" LG HOSE, (LARGE) - W/ RED TIE HOSE, (LARGE) - W/ BLUE TIE HOSE, (LARGE) - W/ ORANGE TIE HOSE, (MEDIUM) - W/ BLUE TIE HOSE, (MEDIUM) - W/ BLUE / WHITE TIE HOSE, (MEDIUM) - W/ RED TIE HOSE, (MEDIUM) - W/ RED / WHITE TIE RUBBER GROMMET HOSE SLEEVING CAP NUT, F/ SHIPPING ONLY 2008 Alamo Group Inc. Parts Section -52

56 BUZZ BAR - HYD MOTOR PARTS - P/N MOTOR GEAR ASY SNAP RING * SPACER SEAL RETAINER * SEAL MOUNTING FLANGE W/ BUSHINGS PLUG CHECK ASY * SEAL END * * THRUST PLATE GEAR SET * SQUARE SEAL 2008 Alamo Group Inc. Parts Section -53

57 BUZZ BAR - HYD MOTOR PARTS - P/N Continued DOWEL PIN GEAR HOUSING PORTING FLANGE W/ BUSHINGS WASHER BOLT * SIDE SEAL ( NOT SHOWN ) KEY 2008 Alamo Group Inc. Parts Section -54

58 BUZZ BAR ASY - 48 IN - GEN 1 (PART 1) 2008 Alamo Group Inc. Parts Section -55

59 BUZZ BAR ASY - 48 IN - GEN 1 (PART 1) Continued SAW HEAD ASY, 48 INCH 2 BLADE END CAP BLADE SPACER SPINDLE ASY BOLT, SOCKET HEAD CNTR-SNK 1/2"-NC X 3-1/2" BOLT, SOCKET HEAD CNTR-SNK 1/2"-NC X 2" SLOTTED NUT, 1/2"-NC PLB HEX NUT, 1/2"-NC PL SAW BODY WLD`MT, 2 BLADE BRACKET TENSION ADJUSTMENT LUG NUT, 1/2"-20NF 90DEG BOLT, HEX HEAD 1/2"-NC X 3-1/2" PL GR V-BELT SHEAVE, W/GROOVE BUSHING QD BELT COVER, LEFT STUD, QUICK RELEASE W/RING RETAINER F/ QUICK RELEASE RECEIVER F/ QUICK RELEASE BOLT, HEX HEAD 3/8"-NC X 1" PL GR FLATWASHER, 3/8" PL STD LOCKNUT, 1/2"-NC PLB DRIVE SPINDLE ASY MOTOR, PISTON-2.48 CU.IN./REV BOLT, HEX HEAD 1/2"-13NC X 1-3/4" PL GR HUB, 1-1/8" BORE & 1/4" KEY INSERT, URETHANE COVER, PROTECTIVE NYLON HUB, 1-1/8" BORE & 5/16" KEY SHEET, BELT COVER SHORT HITCH POST WLD`MT LOCKNUT, 3/4"-NC PLC HITCH POST CLAMP PLATE BOLT, HEX HEAD 3/4"-10NC X 2" PL GR MOUNT TUBE WLD`MT, 2 BLADE LOCKNUT, 3/8"-NC PLB BOLT, HEX HEAD 3/8"-16NC X 1-1/2" PL GR BUMPER REAR SHIELD WLD`MT SAW BLADE PACKAGE OF PLASTIC TIE, 11" LG (RED TIE) 2008 Alamo Group Inc. Parts Section -56

60 BUZZ BAR ASY - 48 IN - GEN 1 (PART 2) 2008 Alamo Group Inc. Parts Section -57

61 BUZZ BAR ASY - 48 IN - GEN 1 (PART 2) Continued ADAPTER, HYD STRAIGHT PLASTIC TIE, 11" LG (ORANGE TIE) ADAPTER, HYD, TEE HOSE, # 16-16FJX - 16FJX45-74" LG (RED TIE) HOSE, #16-16FJX - 16FJX45-74" LG (ORANGE TIE) ADAPTER, HYD REDUCER HOSE, # 8-8FJX - 8FJX - 80" LG (BLUE TIE) ADAPTER, HYD STRAIGHT 8MB - 8FJX ADAPTER, HYD ELBOW HOSE, # 8-8FJX - 8FJX - 17" LG DECAL, WARNING BELT SHIELD DECAL, USE/REPAIR GUARDS DECAL, BLADES THROWN OBJECTS DECAL, REPLACEMENT PARTS DECAL, TRACTOR OPERATOR SAFETY DECAL, PINCH POINTS DECAL, SHIELD MISSING DECAL, WARNING HOSE BURST DECAL, MULTI HAZ DECAL, ALAMO INDUSTRIAL LOGO DECAL, BUZZBAR 62 D138 1 DECAL, CW BLADE ROTATION DECAL, HEAR PROTECTION REQD DECAL, ROTATING BLADES DECAL, WARNING DISCONNECT DECAL, NO HITCH POST HERE NFS PLATE, SERIAL NUMBER BB NFS METAL TACK DECAL, ALAMO IND. GREEN & BLACK DECAL, RED REFLECTOR DECAL, YELLOW REFLECTOR ADAPTER, HYD STRAIGHT PIN WLD`MT, 11-1/2" LG FLATWASHER, 1-3/8" TYPE B NARROW SLOTTED NUT, 1-3/8"-12NF PLB COTTER PIN, 5/16" X 2-1/2" PL BOLT, HEX HEAD 3/8"-NC X 2-3/4" PL GR PIN, CHROME 1-1/2" X 9" KEY, 1/4" X 1/4" X 1-1/4" LG DECAL, PATENT PENDING 2008 Alamo Group Inc. Parts Section -58

62 BUZZ BAR ASY - 48 IN - GEN 1 (PART 3) 2008 Alamo Group Inc. Parts Section -59

63 BUZZ BAR ASY - 48 IN - GEN 1 (PART 3) Continued INSERT SHEET, BUZZBAR MACHETE RELIEF MANIFOLD ASY, 2900 PSI CAP NUT, # 4FJ PLASTIC TIE, 11" LG COTTER PIN, 1/8" X 1" WASHER, PLATED MOTOR MOUNT TUBE, MACHINED DECAL, ALAMO IND. GREEN & BLACK 2008 Alamo Group Inc. Parts Section -60

64 BUZZ BAR ASY - 48 IN - GEN 2 (PART 1) 2008 Alamo Group Inc. Parts Section -61

65 BUZZ BAR ASY - 48 IN - GEN 2 (PART 1) Continued ASY, 2 BLADE BUZZBAR, PISTON WELDMENT, SAW BODY 2 BLADE BUMPER WLDMT, REAR SHIELD 2 BLADE MACHINED TUBE, MOTOR MOUNT ASSEMBLY, SPINDLE SHAFT BLADE SPACER PLATE, SHAFT END CAP HUB ASSY BLADES BRACKET TENSION ADJUST NUT HEX 1/2 NC HHCS 1/2 NC 3-1/2, FULL THREAD NUT 1/2 NF FLAT SOCKET HEAD 1/2 NC X 3-1/2 W/ HOLE FLAT SOCKET HEAD 1/2 NC X 2" W/ HOLE SLOT NUT SHEAVE QD BUSHING BELT, MICRO-V SQ KEY HUB, 20R10 W/1-1/8" BORE INSERT, URETHANE COVER, NYLON HUB, 20R10 W/1-1/8" BORE SLIP ON RECEPTACLE 9MM SHEET, BELT COVER, LEFT 2 BLADE BELT COVER, SHORT PISTON MOTOR LOCKNUT TLM 1/2 NC PLB HHCS 1/2-13UNC 1 3/4 PL PLASTIC TIE, RED, 11LG PLASTIC TIE, ORANGE, 11LG PLATE-CLAMP, HITCHPOST WELDMENT, HITCHPOST NUT 3/4 NC LOCKNUT HHCS 3/4 NC 2 PL STUD 9MM 1/4 TURN BOLT, HHCS 3/8 NC 1 PL FLATWASHER 3/8 STD LOCKNUT TLM 3/8 NC PLC 2008 Alamo Group Inc. Parts Section -62

66 BUZZ BAR ASY - 48 IN - GEN 2 (PART 2) 2008 Alamo Group Inc. Parts Section -63

67 BUZZ BAR ASY - 48 IN - GEN 2 (PART 2) Continued HHCS 3/8-16UNC 1-1/2 PL WELDMENT, PIN, HITCH POST PIN, COTTER 5/16 X 2-1/2 PL NUT SLOT 1-3/8 12NF PLB FLATWASHER 1-3/8 TYPE B NARROW HOSE #16-16FJX -16FJX45-74LG HOSE #16-16FJX -16FJX45-74LG ADP HYD STGHT 16MB-16MJ ADP HYD TEE 16FJX-16MJ-16MJ ADP HYD STGHT 8MB-8MJ HOSE #8-8FJX - 8FJX - 80LG ADP HYD STGHT 16FJ-8MJ ADP HYD STGHT 8MB - 8FJX ASY RELIEF MANIFOLD 2900 PSI ADP HYD ELBOW 8MB - 8MJ 90? HOSE #8-8FJX - 8FJX - 17LG PLASTIC TIE BLUE 11LG WASHER, FLAT, PLATED PIN, COTTER 1/8 X CORDURA SLEEVING-54 LG 2008 Alamo Group Inc. Parts Section -64

68 BUZZ BAR ASY - 69 IN - GEN 1 (PART 1) 2008 Alamo Group Inc. Parts Section -65

69 BUZZ BAR ASY - 69 IN - GEN 1 (PART 1) Continued SAW BLADE HEAD ASY, 69" (3 BLADE) END CAP BLADE SPACER SPINDLE ASY BOLT, SOCKET CNTR-SNK 1/2"-NC X 3-1/2" W/HOLE BOLT, SOCKET CNTR-SNK 1/2"-NC X 2" W/HOLE SLOTTED NUT, 1/2"-NC PLB HEX NUT, 1/2"-NC PL SAW BODY WLD`MT, 3 BLADE TENSION ADJUSTMENT BRACKET LUG NUT, 1/2"-20NF 90DEG BOLT, HEX HEAD 1/2"-NC X 3-1/2" PL GR V-BELT SHEAVE W/GROOVE BUSHING, QD SHEET, BELT COVER, LEFT 3 BLADE STUD, QUICK RELEASE W/RING RETAINER F/QUICK RELEASE RECEIVER F/ QUICK RELEASE BOLT, HEX HEAD 3/8"-NC X 1 PL GR FLATWASHER, 3/8" PL STD LOCKNUT, 1/2"-NC PLB DRIVE SPINDLE ASY MOTOR, PISTON-2.48 CU.IN./REV BOLT, HEX HEAD 1/2"-13NC X 1-3/4" PL GR HUB, 1-1/8" BORE X 1/4" KEY INSERT, URETHANE COVER, PROTECTIVE NYLON HUB, 1-1/8" BORE X 5/16" KEY BELT COVER, SHORT HITCH POST WLD`MT LOCKNUT, 3/4"-NC PLC PLATE, HITCH POST CLAMP BOLT, HEX HEAD 3/4"-10NC X 2" PL GR HITCH TUBE WLD`MT, 3 BLADE LOCKNUT, 3/8"-NC PLB BOLT, HEX HEAD 3/8"-16NC X 1-1/2" PL GR BUMPER SHIELD WLD`MT, REAR SAW BLADE PACKAGE OF PLASTIC TIE, 11" LG 2008 Alamo Group Inc. Parts Section -66

70 BUZZ BAR ASY - 69 IN - GEN 1 (PART 2) 2008 Alamo Group Inc. Parts Section -67

71 BUZZ BAR ASY - 69 IN - GEN 1 (PART 2) Continued ADAPTER, HYD STRAIGHT PLASTIC TIE, 11" LG ADAPTER, HYD TEE HOSE, # 16-16FJX - 16FJX45-74" LG (ORANGE TIE) HOSE, # 16-16FJX - 16FJX45-74" LG (RED TIE) ADAPTER, HYD REDUCER HOSE, # 8-8FJX - 8FJX - 80" LG (BLUE TIE) ADAPTER, HYD STRAIGHT 8MB - 8FJX ADAPTER, HYD ELBOW HOSE, # 8-8FJX - 8FJX - 17" LG DECAL, WARNING BELT SHIELD DECAL, USE/REPAIR GUARDS DECAL, BLADES THROWN OBJECTS DECAL, REPLACE PARTS DECAL, TRACTOR OPERATOR SAFETY DECAL, PINCH POINTS DECAL, SHIELD MISSING DECAL, WARNING HOSE BURST DECAL, MULTI HAZ DECAL, ALAMO INDUSTRIAL LOGO DECAL, BUZZBAR 62 D138 1 DECAL, BLADE ROTATION DECAL, HEAR PROTECTION REQD DECAL, ROTATING BLADES DECAL, WARNING DISCONNECT DECAL, NO HITCH POST HERE NFS SERIAL NUMBER PLATE BB NFS METAL TACK DECAL, ALAMO IND. GREEN & BLACK DECAL, RED REFLECTOR DECAL, YELLOW REFLECTOR ADAPTER, HYD STRAIGHT PIN WLD`MT, 11-1/2" LG FLATWASHER, 1-3/8" TYPE B NARROW SLOTTED NUT, 1-3/8"-12NF PLB COTTER PIN, 5/16" X 2-1/2" PL BOLT, HEX HEAD 3/8"-NC X 2-3/4" PL GR PIN, 1-1/2" X 9" CHROME KEY, 1/4" SQ KEY 1-1/4" LG DECAL, PATENT PENDING 2008 Alamo Group Inc. Parts Section -68

72 BUZZ BAR ASY - 69 IN - GEN 1 (PART 3) 2008 Alamo Group Inc. Parts Section -69

73 BUZZ BAR ASY - 69 IN - GEN 1 (PART 3) Continued INSERT SHEET, BUZZBAR MACHETE RELIEF MANIFOLD ASY, 2900 PSI CAP NUT, # 4FJ PLASTIC TIE, 11" LG COTTER PIN, 1/8" X 1" WASHER, PLATED MOTOR MOUNT TUBE, MACHINED DECAL, ALAMO IND. GREEN & BLACK 2008 Alamo Group Inc. Parts Section -70

74 BUZZ BAR ASY - 69 IN - GEN 2 (PART 1) 2008 Alamo Group Inc. Parts Section -71

75 BUZZ BAR ASY - 69 IN - GEN 2 (PART 1) Continued ASY, 3 BLADE BUZZBAR, PISTON WELDMENT, SAW BODY 3 BLADE BUMPER WLDMT, SHIELD 3 BLADE BRACKET TENSION ADJUST MACHINED TUBE, MOTOR MOUNT HUB ASSY ASSEMBLY, SPINDLE SHAFT PLATE, SHAFT END CAP BLADE SPACER NUT 1/2 NF BLADES FLAT SOCKET HEAD 1/2 NC X 3-1/2 W/ HOLE FLAT SOCKET HEAD 1/2 NC X 2" W/ HOLE SLOT NUT HHCS 1/2 NC 3-1/2, FULL THREAD NUT HEX 1/2 NC FLATWASHER 3/8 STD SHEAVE QD BUSHING BELT, MICRO-V STUD 9MM 1/4 TURN SLIP ON RECEPTACLE 9MM HUB, 20R10 W/1-1/8" BORE SQ KEY INSERT, URETHANE COVER, NYLON HUB, 20R10 W/1-1/8" BORE BOLT, HHCS 3/8 NC 1 PL HHCS 3/8 X 1-1/2 NC PL GR LOCKNUT TLM 3/8 NC PLC PISTON MOTOR HHCS 1/2-13UNC 1 3/4 PL LOCKNUT TLM 1/2 NC PLB PLASTIC TIE, RED, 11LG PLASTIC TIE, ORANGE, 11LG BELT COVER, SHORT BELT COVER, LEFT 3 BLADE PLATE-CLAMP, HITCHPOST WELDMENT, HITCHPOST NUT 3/4 NC LOCKNUT 2008 Alamo Group Inc. Parts Section -72

76 BUZZ BAR ASY - 69 IN - GEN 2 (PART 2) 2008 Alamo Group Inc. Parts Section -73

77 BUZZ BAR ASY - 69 IN - GEN 2 (PART 2) Continued HEXB 3/4-10UNC 2 PL WELDMENT, PIN, HITCH POST FLATWASHER 1-3/8 TYPE B NARROW NUT SLOT 1-3/8 12NF PLB PIN, COTTER 5/16 X 2-1/2 PL ADP HYD STGHT 16MB-16MJ ADP HYD TEE 16FJX-16MJ-16MJ HOSE #16-16FJX -16FJX45-74LG HOSE #16-16FJX -16FJX45-74LG ADP HYD STGHT 8MB-8MJ HOSE #8-8FJX - 8FJX - 80LG PLASTIC TIE BLUE 11LG ADP HYD STGHT 16FJ-8MJ ASY RELIEF MANIFOLD 2900 PSI ADP HYD STGHT 8MB - 8FJX ADP HYD ELBOW 8MB - 8MJ 90? HOSE #8-8FJX - 8FJX - 17LG WASHER, FLAT, PLATED PIN, COTTER 1/8 X CORDURA SLEEVING-54 LG 2008 Alamo Group Inc. Parts Section -74

78 BUZZ BAR ASY - 90 IN - GEN 1 (PART 1) 2008 Alamo Group Inc. Parts Section -75

79 BUZZ BAR ASY - 90 IN - GEN 1 (PART 1) Continued ASY 4 BLADE SAW HEAD END CAP SPACER ASY SPINDLE CSSH 1/2 NC 3-1/ CSSH 1/2 NC NUT, SLOTTED 1/2 NC PLB NUT 1/2 NC HEX PL USE BRACKET TENSION ADJUSTMENT NUT 1/2-20NF 90DEG.CONE LUG PL HHCS 1/2 NC 3-1/2 PL BELT POLY-V 615L SHEAVE POLY-V 20L6.00 W/GROOVE BUSHING QD-SK 1-1/ SHEET, BELT COVER LONG, QUICK RELEASE W/RING FOR QUICK RELEASE FOR QUICK RELEASE HEXB 3/8 NC 1 PL FLATWASHER STD 3/ LOCKNUT TLM 1/2 NC PLB ASY,DRIVE SPINDLE MOTOR,PISTON-2.48 CU.IN./REV HHCS 1/2-13UNC 1-3/4 PL HUB 20R10 1-1/8 BORE 1/4 KEY INSERT, URETHANE FOR 20R COVER, PROTECTIVE NYLON FOR HUB 20R10 1-1/8 BORE 5/16 KEY SHEET, BELT COVER SHORT WLDMT HITCH POST NUT 3/4-NC TOPLOCK GRC PL PLATE,HITCH POST CLAMP HEXB 3/4-10UNC 2 PL WLDMT HITCH TUBE 4 BLADE SAW LOCKNUT TLM 3/8-NC PLC HHCS 3/8-16UNC 1-1/2 PL BUMPER WLDMT SHIELD REAR SAW BLADE PACKAGE OF PLASTIC TIE RED 11LG 2008 Alamo Group Inc. Parts Section -76

80 BUZZ BAR ASY - 90 IN - GEN 1 (PART 2) 2008 Alamo Group Inc. Parts Section -77

81 BUZZ BAR ASY - 90 IN - GEN 1 (PART 2) Continued ADP HYD STGHT 16MB-16MJ PLASTIC TIE ORANGE 11LG ADP HYD TEE 16FJX-16MJ-16MJ HOSE #16-16FJX -16FJX45-74LG HOSE #16-16FJX -16FJX45-74LG ADP HYD STGHT 16FJ-8MJ HOSE #8-8FJX - 8FJX - 80LG ADP HYD STGHT 8MB - 8FJX ADP HYD ELBOW 8MB - 8MJ 90? HOSE #8-8FJX - 8FJX - 17LG DECAL,WARNING BELT SHIELD DECAL,USE/REPAIR GUARDS DECAL,BLADES THROWN OBJECTS DECAL-REPLACEMENT PARTS DECAL-TRACTOR OPERATOR SAFETY DECAL - PINCH POINTS DECAL-SHIELD MISSING DECAL-,WARNING OIL LEAK DECAL, MULTI-HAZARD DECAL, ALAMO INDUSTRIAL DECAL BUZZBAR 62 D138 1 DECAL,CW BLADE ROTATION DECAL HEAR PROTECTION REQD DECAL ROTATING BLADES DECAL WARNING DISCONNECT DECAL NO HITCH POST HERE PLATE SERIAL NUMBER BB METAL TACK DECAL, ALAMO IND. GREEN &BLACK DECAL,RED REFLECTOR DECAL,YELLOW REFLECTOR ADP HYD STGHT 8MB-8MJ WELDMENT, PIN /2LG FLATWASHER 1-3/8 TYPE B NARROW NUT SLOT 1-3/8 12NF PLB PIN, COTTER 5/16 X 2-1/2 PL HHCS 3/8 NC 2-3/4 PL PIN, 1-1/2 X 9 CHROME KEY 1/4 SQ X 1 1/4 LG DECAL- PATENT PENDING 2008 Alamo Group Inc. Parts Section -78

82 BUZZ BAR ASY - 90 IN - GEN 1 (PART 3) 2008 Alamo Group Inc. Parts Section -79

83 BUZZ BAR ASY - 90 IN - GEN 1 (PART 3) Continued INSERT SHEET BUZZBAR MACHETE ASY RELIEF MANIFOLD 2900 PSI CAP-NUT #4FJ PLASTIC TIE BLUE 11LG PIN, COTTER 1/8 X WASHER, FLAT, PLATED MACHINED TUBE, MOTOR MOUNT DECAL, ALAMO IND. GREEN &BLACK 2008 Alamo Group Inc. Parts Section -80

84 BUZZ BAR ASY - 90 IN - GEN 2 (PART 1) 2008 Alamo Group Inc. Parts Section -81

85 BUZZ BAR ASY - 90 IN - GEN 2 (PART 1) Continued ASY, 4 BLADE BUZZBAR PISTON WELDMENT, SAW BODY 4 BLADE WLDMT, REAR SHIELD HUB ASSY BUMPER ASSEMBLY, SPINDLE SHAFT SHEAVE QD BUSHING BLADES BLADE SPACER BRACKET TENSION ADJUST PLATE, SHAFT END CAP MACHINED TUBE, MOTOR MOUNT BELT COVER, LONG BELT COVER, SHORT SQ KEY HUB, 20R10 W/1-1/8" BORE HUB, 20R10 W/1-1/8" BORE COVER, NYLON INSERT, URETHANE BELT, MICRO-V SLIP ON RECEPTACLE 9MM PLASTIC TIE, ORANGE, 11LG PLASTIC TIE, RED, 11LG PLATE-CLAMP, HITCHPOST WELDMENT, HITCHPOST HHCS 1/2-13UNC 1 3/4 PL LOCKNUT TLM 1/2 NC PLB NUT 3/4 NC LOCKNUT HHCS 3/4 NC 2 PL FLATWASHER 3/8 STD BOLT, HHCS 3/8 NC 1 PL LOCKNUT TLM 3/8 NC PLC HHCS 3/8 X 1-1/2 NC PL GR FLAT SOCKET HEAD 1/2 NC X 3-1/2 W/ HOLE FLAT SOCKET HEAD 1/2 NC X 2" W/ HOLE SLOT NUT NUT 1/2 NF HHCS 1/2 NC 3-1/2, FULL THREAD NUT HEX 1/2 NC STUD 9MM 1/4 TURN 2008 Alamo Group Inc. Parts Section -82

86 BUZZ BAR ASY - 90 IN - GEN 2 (PART 2) 2008 Alamo Group Inc. Parts Section -83

87 BUZZ BAR ASY - 90 IN - GEN 2 (PART 2) Continued WELDMENT, PIN, HITCH POST FLATWASHER 1-3/8 TYPE B NARROW NUT SLOT 1-3/8 12NF PLB PIN, COTTER 5/16 X 2-1/2 PL MOTOR,PISTON-2.48 CU.IN./REV HOSE #16-16FJX -16FJX45-74LG HOSE #16-16FJX -16FJX45-74LG ADP HYD STGHT 16MB-16MJ ADP HYD TEE 16FJX-16MJ-16MJ ADP HYD STGHT 8MB-8MJ HOSE #8-8FJX - 8FJX - 80LG PLASTIC TIE BLUE 11LG ADP HYD STGHT 16FJ-8MJ ASY RELIEF MANIFOLD 2900 PSI ADP HYD ELBOW 8MB - 8MJ 90? HOSE #8-8FJX - 8FJX - 17LG PIN, COTTER 1/8 X WASHER, FLAT, PLATED 2008 Alamo Group Inc. Parts Section -84

88 BUZZ BAR SPINDLE ASY - SN BB SPINDLE ASY, DRIVE SPINDLE (SHOWN) SPINDLE ASY, NON-DRIVE (NOT SHOWN) SPINDLE HOUSING, MACHINED SPINDLE SHAFT, NON-DRIVE SPINDLE SPINDLE SHAFT, DRIVE SPINDLE COLLAR, BEARING PRELOAD BEARING CUP, UPPER OR LOWER BEARING CONE, UPPER OR LOWER 6 15C WASHER, 1-1/4" HARDEND 7 5D SLOTTED HEX NUT, 1-1/4"-12NF PL SEAL, UPPER OR LOWER GREASE FITTING, 1/8" STRAIGHT GREASE RELIEF FITTING, 1-5LBS BOLT, STUD 1/2"-20NF X 1-7/8" COTTER PIN, 3/16" X 2" 2008 Alamo Group Inc. Parts Section -85

89 DITCHER - BLADE CARRIER ASY BLADE HEAD ASY, W/ BLADES (FORWARD ROTATION) BLADE HEAD WLD`MT WEAR PLATE BOLT NUT MOUNT BRACKET BLADE, ROUGH CUT SHIM KIT FOR ROUGH CUT BLADES BOLT BOLT LOCKWASHER NUT 2008 Alamo Group Inc. Parts Section -86

90 DITCHER - HOUSING ASY DITCHER HOUSING ASY HOUSING WLD`MT DEFLECTOR HINGE PIN FLATWASHER COTTER PIN BACK-UP PLATE BOLT LOCKWASHER NUT CYLINDER ASY CYLINDER PIN B13 4 HAIR PIN CLIP RUBBER DEFLECTOR DEFLECTOR CLAMP BAR BOLT BOLT BOLT LOCKWASHER NUT HOUSING COVER 2008 Alamo Group Inc. Parts Section -87

91 DITCHER - HOUSING ASY Continued FLATWASHER ADAPTER, STRAIGHT BOLT 2008 Alamo Group Inc. Parts Section -88

92 DITCHER - SPINDLE ASY SPINDLE ASY (ITEMS 1 THRU 14) SPINDLE HSG, W/ BRG CUPS & GREASE FITTING BEARING CUP BEARING CONE SEAL SPINDLE SHAFT SPACER NUT GREASE FITTING COUPLING HALF, SPINDLE KEY COUPLING HALF, MOTOR CHAIN COUPLING SETSCREW RELIEF FITTING 2008 Alamo Group Inc. Parts Section -89

93 THIS PAGE INTENTIONAL LEFT BLANK 2008 Alamo Group Inc. Parts Section -90

94 DITCHER BLADE HEAD ASY - ROUGH CUT 2008 Alamo Group Inc. Parts Section -91

95 DITCHER BLADE HEAD ASY - ROUGH CUT Continued BLADE HEAD WLD`MT WEAR PLATE MOUNT BRKT-ROUGH CUT BLADE WLD`MT ROUGH CUT, DITCHER BLADE LOCKNUT, 3/4" NC GRC PL LOCKWASHER, 3/4" PL HEAVY LOCKNUT, 1/2" NC PLB HEX HEAD CAP SCREW, 1/2" NC 1-3/4 PL CARRIAGE BOLT, 1/2" 13UNC 1-1/2" PL CARRIAGE BOLT, 3/4" NC 2-1/2" PL Alamo Group Inc. Parts Section -92

96 DITCHER HEAD ASY - (NEW STYLE) MACHETE/MAVERICK DITCHER ASY HITCHPOST WLD`MT, BOOM MOUNT PLATE SPACER ON DITCHER MOTOR GEROLER, 7.95 CID SEAL KIT, REAR MTR SEAL KIT, SHAFT MTR SHAFT ASY, 1 1/4-14T BLADE, HSG ASY SPINDLE ASY BLADE, HEAD ASY. ROUGH CUT 2008 Alamo Group Inc. Parts Section -93

97 DITCHER HEAD ASY - (NEW STYLE) Continued LOCKWASHER, 1/2" PL STD FLATWASHER, 3/4" TYPE AW,ZP LOCKNUT, 1/2" NC PLB LOCKNUT, 3/4" NC GRC PL HEX HEAD BOLT, 1/2" NC 1-3/4" PL HEX HEAD BOLT, 3/4" NC 3-1/2" PL HEX HEAD BOLT, 1/2" NC 2-1/4" PL ADP HYD STRAIGHT, 10MB - 16MJ RELIEF VALVE, INLINE 160 PSI ADAPTER, HYD, STRIAGHT DECAL, WARNING SHIELDS & GRDS DECAL, WARNING HOSE BURST DECAL, REPLACEMENT PARTS DECAL, ALAMO INDUSTRIAL LOGO DECAL, BOOM DITCHER DECAL, DITCHER PLASTIC TIE, 11" LG PLASTIC TIE, 11" LG PLASTIC TIE, 11" LG PIN WELDMENT, 11-1/2" LG PIN, 1-1/2" X 9" CHROME LOCKNUT, 3/8" NC PLC HEX HEAD BOLT, 3/8" NC 2-3/4" PL SLOTTED NUT, 1-3/8" 12NF PLB FLATWASHER, 1-3/8" TYPE B NARROW COTTER PIN, 5/16" X 2-1/2" PL DECAL, MULTI HAZ HOSE, #16-16FJX - 16FJX 90-62" LG HOSE, #16-16FJX - 16FJX 90-54" LG H0SE, #8-8FJX - 8FJX 90-54" LG HOSE, #4-4FJX - 6FJX 90-80" LG HOSE, #4-4FJX - 6FJX 90-88" LG PLASTIC TIE, 4" LG PLASTIC TIE, 4" LG 2008 Alamo Group Inc. Parts Section -94

98 DITCHER HEAD ASY - (OLD STYLE) DITCHER HEAD ASY LOCKWASHER LOCKNUT FLATWASHER LOCKNUT LOCKNUT 2008 Alamo Group Inc. Parts Section -95

99 DITCHER HEAD ASY - (OLD STYLE) Continued SPACER PLATE HOUSING ASY BLADE HEAD ASY BOLT BOLT PLASTIC CAP, OUTER 1/4" (NOT SHOWN) PLASTIC PLUG, INNER 3/8" (NOT SHOWN) PLUG, (NOT SHOWN) PLASTIC CAP, OUTER 3/8" (NOT SHOWN) BOLT DITCHER MOUNT PIN, 1-1/4" DIA PIN, 1-1/2" DIA MOTOR (FEB & DOWN) 11.9 CID (MOTOR LENGTH 10-5/8" LONG FROM MOUNT FLANGE TO END OF MOTOR) MOTOR (MAR & UP) 7.95 CID (MOTOR LENGTH MEASURES 8-5/8" FROM MOUNT FLANGE TO END OF MOTOR, TH SEAL KIT, REAR (F/ MOTOR ONLY) SEAL KIT, SHAFT (F/ MOTOR ONLY) SHAFT ASY. 1-1/4" -14T (F/ MOTOR ONLY)? SEAL KIT, FRONT & REAR HALF COMPLETE (F/ MOTOR P/N ONLY) SEAL KIT, FRONT HALF ONLY (F/ MOTOR SEAL KIT, REAR HLAF ONLY (F/ MOTOR P/N ONLY) MOTOR INPUT SHAFT (F/ MOTOR P/N ONLY) SPINDLE ASY SWING BAR (NOT SHOWN) CAP NUT (NOT SHOWN) BOLT HOSE HOSE HOSE ADAPTER, ELBOW 90? ADAPTER, STRAIGHT ADAPTER, STRAIGHT ADAPTER, ELBOW 45? ADAPTER, STRAIGHT (USED W/ MOTOR P/N ) ADAPTER, STRAIGHT (USED W/ MOTOR P/N ) ADAPTER, STRAIGHT LOW PRESSURE RELIEF 2008 Alamo Group Inc. Parts Section -96

100 DITCHER HEAD DEFLECTOR CYLINDER DEFLECTOR CYLINDER, W/FITTINGS A - HYDRAULIC CYLINDER TUBE WELDMENT HEAD,CYLINDER ROD WELDMENT PISTON 5 5JRC LOCKNUT, 3/4" NF PLC ADAPTER, HYD, STRAIGHT PIN-CYLINDER PIN-CLIP 9* SEAL, GLAND 10* O-RING 11* SEAL, ROD 12* SEAL, ROD WIPER 13* SEAL, PISTON SEAL KIT (ITEMS WITH * ARE INCLUDED IN SEAL KIT) 2008 Alamo Group Inc. Parts Section -97

101 FILTER ASY - PN FILTER ASY IN-LINE MACHETE VISUAL INDICATOR W/BYPASS HUB, 20R10 1BORE WITH FILTER HEAD FOR O-RING FILTER REPLACEMENT ELEMENT BACK UP RING O-RING BOWL 4 FOR FILTER 2008 Alamo Group Inc. Parts Section -98

102 FILTER ASY - PN FILTER ASY, HEAD BOWL, FILTER ASY FILTER, ELEMENT INDICATOR, VISUAL 2008 Alamo Group Inc. Parts Section -99