EN : MEASUREMENT AND TEST REPORT For

Transcription

1 E : 2004 MEASUREMET AD TEST REORT For LOGSTAR LIGHTIG GROU TangTou Industry park, ShiYan Town, BaoAn district, Shenzhen City, Guangdong rovince, China Model:LS-T8-T600S1,LS-T8-T900S1,LS-T8-T1200S1,LS-T8-T1500S1,LS-T8-M600S1, LS-T8-M900S1, LS-T8-M1200S1, LS-T8-M1500S1 Aug. 09, 2009 MTI RS ote: This test report is limited to the above client company and the product model only. It may not be duplicated without prior written consent of MTI Technology Laboratory Ltd.

2 TEST REORT E : 2004 Luminaires --- Safety--- art 1: Genaral Requirements and tests Report reference o...: MTI RS Tested by (printed name and signature)...: Jack Shi Approved by (printed name and signature)...: Hebe Lee Date of issue...: July 02, 2009 Testing Laboratory ame...: MTI Technology Laboratory Ltd. Address...: 10F, Yinxing Business Hotel, Xixiang Road, Bao'an District, Shenzhen,.R.China. Testing location...: Same as above Applicant s name:...: LOGSTAR LIGHTIG GROU Address...: TangTou Industry park, ShiYan Town, BaoAn district, Shenzhen City, Guangdong rovince, Test specification Standard...: E :2004 +A1: 2006 Test procedure...: CE-LVD Scheme rocedure deviation...:.a. on-standard test method...:.a. Test Report Form o...: IEC E TRF originator...: MTI

3 Test item description...: LED Fluorescent Tube Trademark...: Manufacturer...: LOGSTAR LIGHTIG GROU Address...: TangTou Industry park, ShiYan Town, BaoAn district, Shenzhen City, Guangdong rovince, Model and/or type reference...: LS-T8-T1200S1 Rating(s)...: V~, 50/60Hz, 21W class II Test case verdicts: Test case does not apply to the test object. : (ot Applicable) Test object does meet the requirement...: (ass) Test object does not meet the requirement...: F(ail) Testing Date of receipt of test item.....: Jun.23, 2009 Date(s) of performance of test.....: Jun.23, 2009 to Jun.29, 2009 General remarks This report shall not be reproduced except in full without the written approval of the testing laboratory. The test results presented in this report relate only to the item tested. (see remark #)" refers to a remark appended to the report. "(see Annex #)" refers to an annex appended to the report. Throughout this report a point is used as the decimal separator. This report shall not be altered, increase and deleted. The results relate only to the items tested. This report shall not be published as advertisement without the approval of MTI. This report shall not be copied partly without the written approval of MTI.

4 General information: This product should be together with magnetic ballast, use with electronic ballast is prohibited, install onto the original T8 frame. Models LS-T8-T600S1, LS-T8-T900S1, LS-T8-T1500S1, LS-T8-M600S1, LS-T8-M900S1 are idendical except the model name and quantity of LED for different output power, test performed on model LS-T8-T1200S1. Copy of the marking plate: LED Fluorescent Tube Model o: LS-T8-T1200S1 Voltage: AC90V-265V 50/60Hz Rated ower: 21W Color temperature: K Work Temperature: -30 C~+50 C I50 LOGSTAR LIGHTIG GROU

5 E : General test requirements 0.1 Information for luminaire design considered Standard 0.3 More sections applicable... : -- 2 CLASSIFICATIO 2.2 Type of protection...: Semi-luminaires shall comply with all relevant requirements for class II luminaires 2.3 Degree of protection...: 2.4 Classified according to whether they 2.5 Fixed luminaire suitable for normally flammable surfaces...: Fixed luminaire suitable for non-combustible materials only...: Luminaire for normal use...: Luminaire for rough service...: o symbol 3 MARKIG 3.2 Mandatory markings osition of the marking Format of symbols/text Mark of origin See label Rated voltage(s) in volts V~ The rated maximum ambient temperature ta Symbol for class II luminaires Class II Symbol for class III luminaires I numbers I Maker's model number or type reference LS-T8-T1200S Rated wattage 21W osition of mounting Install in lamp holder

6 - Suitable for normally flammable surfaces Information concerning special lamps E : Similar shape to "cool beam" lamps Terminations mark Minimum distance from lighted objects For rough service luminaires For use with bowl mirror lamps Luminaires incorporating a glass protective shield The maximum number of interconnecting luminaires For luminaires with ignitors For use with self-shielded tungsten halogen lamps only 3.3 Additional information Language of instructions English Combination luminaires ominal frequency in Hz 50/ Operating temperature Symbol or warning notice Wiring diagram Special conditions Metal halid lamp luminaire warning Limitation for semi-luminaires supply information on limitations of use of such devices ower factor and supply current Suitability for use indoors Luminaires with remote control Clip-mounted luminaire warning Specifications of protective shields Symbol for nature of supply ~ Rated current of socket outlet o such outlet Rough service luminaire

7 - connection to IX4 rated socket outlets - correct mounting taking into account the temporary installation E : correct fixing to a stand - maximum height of stand - number of the legs - minimum length of the legs Mounting instruction for type Y, type Z and some type X attachments The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed 3.4 Test of marking Type Z attachments See mounting instruction - Test with water 15s - Test with hexane 15s - Legible after test - Label attached 4 COSTRUCTIO 4.2 Components replaceable without difficulty 4.3 Wireways smooth and free from sharp edges 4.4 Lampholders Integral lampholder Wiring connection Lampholder for end-to-end mounting ositioning - pressure test ()...: - bending test (m)...: 2.m eak pulse voltage Centre contact Rough service luminaires Lamp connectors 4.5 Starter holders

8 Starter holder in luminaires other than class II Starter holder class II construction 4.6 Terminal blocks E : 2004 Tails Unsecured blocks 4.7 Terminals and supply connections Contact to metal parts Location stranded wires 8 mm test live conductor Considered 8 mm test earth conductor Terminals for supply conductors Terminals other than supply connection Heat-resistant wiring/sleeves Multi-pole plug 4.8 Switches: - adequate rating - adequate fixing - polarized supply 4.9 Insulating lining and sleeves Retainment Method of fixing...: Insulated linings and sleeves a) & c) Insulation resistance and electric strength b) Ageing test. Temperature ( C)...: 4.10 Insulation of Class II luminaires o contact, mounting surface - accessible metal parts - wiring of basic insulation Safe installation fixed luminaires Capacitors Interference suppression capacitors according to IEC

9 Assembly joints: - not coincidental - no straight access - degree of protection Retainment of insulation: E : fixed - unable to be replaced; luminaire inoperative - sleeves retained in position - lining in lampholder 4.11 Electrical connections Contact pressure Screws: - spaced threaded screws - thread-cutting screws - earth continuity - at least two screws Screw locking: - spring washer - rivets Material of current-carrying parts Copper pins o contact to wood Electro-mechanical contact systems 4.12 Mechanical connections and glands Mechanical stress ot made of soft metal Screws of insulating material o metal screw used Torque test: torque (m); part...: 0.4.m for pcb screw Torque test: torque (m); part...: Torque test: torque (m); part...: Screw diameter up to 3 mm Locked connections:

10 - fixed arms; torque (m)...: - lampholder; torque (m)...: - push-button switches; torque (m)...: Screwed glands; force ()...: 4.13 Mechanical strength Impact tests: E : fragile parts; energy (m)... : 0,2 m - other parts; energy (m)... : 0,35 m 1) live parts 2) linings 3) protection 4) covers Straight test finger Rough service luminaires I ( I54) a) fixed b) hand-held c) delivered with a stand d) for temporary installations and suitable for mounting on a stand Tumbling barrel 4.14 Suspensions and adjusting devices Mechanical load: A) four times the weight B) torque 2,5 m C) bracket arm; force ()...: D) load track-mounted luminaires E) clip-mounted luminaires, glass-shelve. Thickness (mm)...: metal rod. Diameter (mm)...:

11 Load to flexible cables Mass (kg)...: Stress in conductors (/mm²)...: Semi-luminaires mass (kg)...: Semi-luminaires bending moment (m)...: Adjusting devices: - rotating test; number of cycles...: - strands broken - high voltage test E : Telescopic tubes: cords not fixed to tube; no strain on conductors Guide pulleys Strain on socket-outlets 4.15 Flammable materials: - glow-wire test 650 C - spacing 30 mm - screen withstanding test of screen dimensions - no fiercely burning material - thermal protection - electronic circuits exempted Luminaires made of thermoplastic material a) construction b) temperature sensing control c) surface temperature 4.16 Luminaires marked with "F" symbol o lamp control gear Lamp control gear spacing: - spacing 35 mm - spacing 10 mm

12 Thermal protection: - in lamp control gear - external - fixed position - temperature marked lamp control gear "F" curve measured 4.17 Drain holes Clearance at least 5 mm 4.18 Resistance to corrosion: rust-resistance season cracking in copper corrosion of aluminium E : Ignitors compatible with ballast 4.20 Rough service vibration...: 4.21 rotective shield: Shield fitted articles from a shattering lamp not impair safety o direct path Impact test on shield Glow-wire test on lamp compartment 4.22 Attachments to lamps 4.23 Semi-luminaires comply class II 4.24 UV radiation, metal halide lamps 4.25 o sharp point or edges 4.26 Short-circuit protection: Uninsulated accessible SELV parts Short-circuit test Test chain according to IEC EXTERAL AD ITERAL WIRIG 5.2 Supply connection and external wiring

13 5.2.1 Means of connection...: G8 cap Type of cable...: ominal cross-sectional area (mm²)...: Replacement of non-detachable cable and cords on-rewirable connection Cable entries: - suitable for introduction - adequate degree of protection Cable entries through rigid material have rounded edges Insulating bushings: - suitably fixed - material in bushings - tubes or guards made of insulating material E : Locking of bushings Cord anchorage: - covering protected from abrasion o power cord - clear how to be effective - no mechanical or thermal stress - no tying of cables into knots etc insulating material or lining For type X attachment, cord anchorage shall be such that: a) at least one part fixed b) types of cable c) no damaging of the cable d) whole cable can be mounted e) no touching of clamping screws f) metal screw not directly on cable g) replacement without special tool Glands not used as anchorage Labyrinth type anchorages

14 For type Y and Z attachments, cord anchorages shall be adequate Tests: - impossible to push cable; unsafe - pull test: 25 times; pull ()... : - torque test: torque (m)... : - displacement 2 mm - no movement of conductors - no damage of cable or cord External wiring passing into luminaire Looping-in terminals Wire ends not tinned Wire ends tinned: no cold flow Mains plug same protection Class III luminaire plug E : Colour code low voltage Appliance inlets (IEC 60320) Appliance couplers of class II type 5.3 Internal wiring Cross-sectional area (mm²)...: Insulation thickness Temperature resistant 0.5 mm² Sleeves suitable for hot spots Green-yellow for earth only Through wiring - cross-sectional area (mm²)...: - not delivered/ mounting instruction - factory assembled - socket outlet loaded (A)...: - temperatures...: Sharp edges etc.

15 o moving parts of switches etc. Complies with Joints, raising/lowering devices Telescopic tubes etc. o twisting over Openings Bushings not removable Bushings in sharp openings Cables with protective sheath Joints and junctions: - easily accessible - effectively insulated Strain on internal wiring Wire carriers Wire ends not tinned Wire ends tinned: no cold flow E : ROVISIO FOR EARTHIG Metal parts Accessible metal parts Metal parts and supporting surface Resistance < 0,5 Ω Two spaced threaded screws used Thread-forming screws Connector earthing first Earth continuity Locking of clamping means Compliance with Adequate locking Loosening of clamping means Connector socket

16 osition of the earth terminal Corrosion of the earth terminal Material of earth terminal Contact surface bare metal Class II luminaire for looping-in Earthing core coloured green-yellow Length of earth conductor (3.8.1) The attachment of the fixed part of the terminal shall be designed and executed so as to prevent it from being rotated when the clamping part is moved. 8 ROTECTIO AGAIST ELECTRIC SHOCK Live parts not accessible rotection in any position Insulation lacquer not reliable E : 2004 Double-ended tungsten filament lamp Double-ended high pressure discharge lamp ortable luminaire Class II luminaire: - insulation-encased, reinforced insulation - metal-encased, double insulation Double insulation - basic insulated metal parts or basic insulated live conductors only accessible during starter or lamp replacement - glass protective shields not used as supplementary insulation Class I luminaire with BC lampholder ortable luminaire: - non-detachable cable - terminal block completely covered Covers have adequate strength (see 4.13)

17 Covers reliably secured Discharging of capacitors 0,5 µf ot 0,5 µf ortable plug connected luminaire with capacitor Other plug connected luminaire with capacitor Discharge device on or within capacitor Discharge device mounted separately 9 RESISTACE TO DUST, SOLID OBJECTS AD MOISTURE 9.2 Tests for ingress of dust, solid objects and moisture: - classification according to I... : - mounting position during test... : - fixing screws tightened; torque (m)... : - tests according to clauses... : - electric strength a) no deposit in dust-proof luminaire b) no talcum in dust-tight luminaire c) no trace of water on live parts E : 2004 d) no accumulation of water in waterproof luminaire e) no water in watertight luminaire f) no contact with live parts (I 2X) f) no entry into enclosure (I 3X and I 4X) 9.3 Humidity test 48 h (3.13.1) For luminaires with an I classification greater than I20 the order of the tests specified in section 9 of shall be as specified in 3.12 of this section of IEC ISULATIO RESISTACE AD ELECTRIC STREGTH 1.14 (10.2.1) Insulation resistance test: Class of protection... : Class II Insulation resistance (MΩ): SELV:

18 - between current-carrying parts of different polarity... : - between current-carrying parts and mounting surface... : - between current-carrying parts and metal parts of the luminaire... : Other than SELV: - between live parts of different polarity... : - between live parts and mounting surface : > 4 MΩ - between live parts and metal parts... : > 4 MΩ - between live parts of different polarity through action of a switch... : Electric strength test Class of protection... : Class II appliance Dummy lamp Luminaires with ignitors after 24 h test Luminaires with manual ignitors Test voltage (V): SELV: E : between current carrying parts of different polarity... : - between current carrying parts and mounting surface... : - between carrying parts and metal parts of the luminaire... : Other than SELV: o SELV circuit - between live parts of different polarity... : 2 x = between live parts and mounting surface : 4 x = between live parts and metal parts... : 2 x = between live parts of different polarity through action of a switch... : Leakage current (ma)... : < 0.5 ma 11 CREEAGE DISTACES AD CLEARACES Class of protection... : Class II

19 Working voltage (V)... : 265V Voltage form Sinusoidal TI < 600 Rated pulse voltage (kv)... : (1) Live parts of different polarity: cr (mm); cl (mm)... : (2) Live parts and accessible parts: cr (mm); cl (mm)... : Cr=Cl>8mm; Limit:Cr: 8mm Cl: 4mm Cr>Cl>9mm; Limit: 9 mm (3) arts becoming live: cr (mm); cl (mm).. : (4) Outer surface of cable: cr (mm); cl (mm): (5) Live parts of switches: cr (mm); cl (mm): (6) Live parts and supporting surface: cr (mm); cl (mm)... : Cr>Cl>9mm; Limit: 9mm 12 EDURACE TEST AD THERMAL TEST 12.3 Endurance test: - mounting-position... : In lamp holder - test temperature ( C)... : 30 E : total duration (h)... : 168h - supply voltage: Un factor; calculated voltage (V): 292V - lamp used... : T8 tubular with many LED After endurance test: - no part unserviceable - luminaire not unsafe - no damage to track system - marking legible - no cracks, deformation etc Thermal test (normal operation) (see Annex ) 12.5 Thermal test (abnormal operation) (see Annex ) 12.6 Thermal test (failed lamp control gear condition): case of abnormal conditions... : - electronic lamp control gear

20 - measured winding temperature ( C) at 1,1 Un : - measured mounting surface temperature ( C) at 1,1 Un... : - calculated mounting surface temperature ( C) : - track-mounted luminaires Temperature sensing control - thermal link - manual reset cut-out - auto reset cut-out - measured mounting surface temperature ( C)... : - track-mounted luminaires 12.7 Thermal test (failed lamp control gear in plastic luminaires): - case of abnormal conditions... : measured winding temperature ( C) at 1,1 Un : - measured temperature of fixing point/ exposed part ( C) at 1,1 Un... : - calculated temperature of fixing point/ exposed part ( C)... : E : Temperature sensing control - thermal link - manual reset cut-out - auto reset cut-out - measured temperature of fixing point/ exposed part ( C)... : 13 RESISTACE TO HEAT, FIRE AD TRACKIG Ball-pressure test: - part tested; temperature ( C)... : 125 for lamp cap - part tested; temperature ( C)... : eedle flame test (10 s): - part tested... : - part tested... :

21 Glow wire test (650 C): - part tested... : Lamp cap - part tested... : Tracking test: part tested... : 14 SCREW TERMIALS 14.1 General: o screw terminals 14.2 Type of terminal... : Rated current (A)... : One or more conductors Special preparation Terminal size Cross-sectional area (mm²)... : Conductor space (mm)... : 14.4 Mechanical tests Minimum distance Cannot slip out Special preparation E : ominal diameter of thread (metric ISO thread) : External wiring o soft metal Corrosion ominal diameter of thread (mm)... : Torque (m)... : Between metal surfaces Lug terminal Mantle terminal ull test; pull ()... : Without undue damage 15 SCREWLESS TERMIALS AD ELECTRICAL COECTIOS

22 15.1 General: 15.2 Type of terminal... : on-premanent conductors Rated current (A)... : Material Copper pins Clamping Stop Unprepared conductors ressure on insulating material Clear connection method Clamping independently Fixed in position Conductor size Type of conductor Terminals internal wiring ull test spring-type terminals (4, 4 samples) ull test pin or tab terminals (4, 4 samples) Insertion force not exceeding ermanent connections: pull-off test (20 ) 15.6 Electrical tests E : 2004 Voltage drop (mv) after 1 h (4 samples)... : <15mV Voltage drop of two inseparable joints umber of cycles... : 25th cycle Voltage drop (mv) after 10th alt. 25th cycle (4 samples)... : Voltage drop (mv) after 50th alt. 100th cycle (4 samples)... : After ageing, voltage drop (mv) after 10th alt. 25th cycle (4 samples)... : After ageing, voltage drop (mv) after 50th alt. 100th cycle (4 samples)... : <7.5mV 15.7 Terminals external wiring Terminal size and rating

23 ull test spring-type terminals (4 samples); pull () ull test pin or tab terminals (4 samples); pull () 15.9 Contact resistance test ZB AEX ZB, SECIAL ATIOAL CODITIOS 2.2 Class 0 not accepted 3.3 DK: power supply cord with label IT: warning label on Class 0 luminaire DK: socket-outlets FR: socket-outlets DK, FI, SE, GB: type of plug ZC AEX ZC, ATIOAL DEVIATIOS 13.3 DK: eedle flame test or glow-wire test 750 for luminaires in access routes 13.3 GB: Requirements according to United Kingdom Building Regulation FR: Glow-wire test 850 alt. 750 for luminaires in premises open to public and workers

24 Type reference...: Lamp used...: Lamp control gear used...: Mounting position of luminaire...: Supply wattage (W)...: Supply current (A)...: Table: measured temperatures corrected for ta = 25 C: LS-T8-T1200S1 21W tubular.a. Install in G8 lamp holders 21W 0.079A - abnormal operating mode...: test 2 - test 1: rated voltage...: - test 2: 1,06 times rated voltage or 1,05 times rated wattage...: - test 3: Load on wiring to socket-outlet, 1,06 times voltage or 1,05 times wattage...: - test 4: 1,1 times rated voltage or 1,05 times rated wattage...: Through wiring or looping-in wiring loaded by a current of A during the test...:.a. 1,06 X 265V = 281V.A..A..A.

25 o LIST OF CRITICAL COMOETS Component/O bject 1 Internal wire Manufacturer Dongguan Wenchang Electronic Co Ltd Type/ Model 1672 Ratings / Technical Data 22AWG 105 VW-1 Complies with the following standard UL,CSA Marks of conformity granted UL E CB Yat Sing rinted Wiring Boards Fty Ltd CEM-1 94V-0, mm UL UL certified -Alternation Various Various 94 V UL UL certified 3 Fuse-link Sunny East Enterprise Co Ltd DI 2A 250VAC UL E VDE Inductor(L1) T E Tested with appliance 5 Insulation lining Methode Electronics (Shanghai) Co Ltd CY60(b)(c) V thickness: 0.25 min UL 94 UL E X2 capacitor Changzhou Defu Electrical Co.,Ltd MX /MK 0.22uF 250V 85 E TUV UL 7 Magnet wire of T1 Shantou Shenggang Electrical Industrial Co., Ltd olyuretha ne 130, UEW UL UL E202352

26 (LED Circuit Diagram)

27 Attachment A EUT s hotos EUT- Front Overview EUT- Back overiew

28 EUT- LED Beads CB-Top View of LED driver

29 CB-Bottom View of LED driver * * * THE ED * * *