ZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. Address... :

Size: px
Start display at page:

Download "ZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. Address... :"

Transcription

1 Test Report issued under the responsibility of: TEST REORT IEC Circuit-breakers for over current protection for household and similar installations art 1 - Circuit-breakers for a.c. operation Report Number... : Date of issue... : Total number of pages Applicant s name... : ZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. Address... : NO. 299 EAST CHANGHONG ROAD, DEQING ECONOMIC ZONE, WUKANG, DEQING, ZHEJIANG, CHINA.C: Test specification: Standard... : IEC (Second Edition) Test procedure... : Type Test Non-standard test method... : Test Report Form No.... : IEC60898_1D Test Report Form(s) Originator... : DEKRA Certification B.V. Master TRF... : Dated Test item description... : Circuit-breakers for overcurrent protection Trade Mark... : MAXGE Manufacturer... : ZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. NO. 299 EAST CHANGHONG ROAD, DEQING ECONOMIC ZONE, WUKANG, DEQING, ZHEJIANG, CHINA.C: Model/Type reference... : SGBi, ALBi6K, ALB6K Ratings... : 1, 2, 3, 4 Ue: 240 / 415 Vac for 1, 415 V for 2, 3, 4 In: 4, 6, 10, 16, 20, 25, 32, 40, 50, 63 A B and C type, 50 / 60 Hz Ics = Icn = Icn1 = 6000 A Energy limiting class 3: B and C type of 4 A to 32 A Energy limiting class 1: B and C type of 40 A to 63 A

2 age 2 of 23 Responsible Testing Laboratory (as applicable), testing procedure and testing location(s): Testing Laboratory: DEKRA Testing Services (Zhejiang) Co., Ltd. Testing location/ address...: No.5, Changjiang Road, Great Bridge Industrial ark, North Baixiang, Wenzhou, Zhejiang, ,.R. China Associated CB Testing Laboratory: Testing location/ address...: Tested by (name, function, signature)...: Ray Zhu Approved by (name, function, signature)...: Lester Wang Testing procedure: CTF Stage 1: Testing location/ address...: Tested by (name, function, signature)...: Approved by (name, function, signature)...: Testing procedure: CTF Stage 2: Testing location/ address...: Tested by (name + signature)...: Witnessed by (name, function, signature)..: Approved by (name, function, signature)...: Testing procedure: CTF Stage 3: Testing procedure: CTF Stage 4: Testing location/ address...: Tested by (name, function, signature)...: Witnessed by (name, function, signature)..: Approved by (name, function, signature)...: Supervised by (name, function, signature) :

3 age 3 of 23 Summary of testing: The following samples were chosen for the type test according to annex C of IEC/EN in consideration of Intertek CB test report: Tests performed (name of test and test clause): No. Type reference Current Number of poles Type Voltage Test sequence 7# SGBi 63 A 1 C 240 / 415 Vac 8# SGBi 32 A 4 B 415 Vac A1 (only clause 6) 1#-3# ALB6K 63 A 2 C 415 Vac 4#-6# ALBi6K 63 A 4 C 415 Vac E1 Notes: 1. This report is based on and shall be read in conjunction with Intertek CB certificate No. SE issued on with test SH SHA-001, 002, 003, 004 issued on The type reference ALB6K and ALBi6K are same with SGBi except the shape of cover, all tests were performed on SGBi in Intertek CB test reports, sequence E1 was performed on maximum current of ALB6K and ALBi6K with 2 and 4 respectively to verify the compliance. Testing location: All tests were conducted in: DEKRA Testing Services (Zhejiang) Co., Ltd. No.5, Changjiang Road, Great Bridge Industrial ark, North Baixiang, Wenzhou, Zhejiang, ,.R. China Summary of compliance with National Differences (List of countries addressed): The product fulfils the requirements of EN : A1: A11: A12: A13:2012, the results are laid down in Annex 1 of this report.

4 age 4 of 23 Copy of marking plate: Marking for 1 circuit-breaker Marking for 4 circuit-breaker

5 age 5 of 23 Copy of marking plate: Marking for 4 circuit-breaker Marking for 4 circuit-breaker Note: The markings for circuit breakers are same except the type reference, the rated current, the tripping characteristic type, and the number of poles.

6 age 6 of 23 Classification of installation and use...: fixed Supply Connection...: single phase or 3 phases system ossible test case verdicts: - test case does not apply to the test object... : - test object does meet the requirement... : (ass) - test object does not meet the requirement... : F (Fail) Testing... : Date of receipt of test item... : Date (s) of performance of tests... : General remarks: "(See Enclosure #)" refers to additional information appended to the report. "(See appended table)" refers to a table appended to the report. Throughout this report a comma / point is used as the decimal separator. Manufacturer s Declaration per sub-clause of IECEE 02: The application for obtaining a CB Test Certificate includes more than one factory location and a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory has been provided...: Yes Not applicable When differences exist; they shall be identified in the General product information section. Name and address of factory (ies)... : ZHEJIANG MAXGE ELECTRIC TECHNOLOGY CO., LTD. NO. 299 EAST CHANGHONG ROAD, DEQING ECONOMIC ZONE, WUKANG, DEQING, ZHEJIANG, CHINA.C: General product information: The technical data of the MCB are listed on page 7 of this report. The grid distance a : 45 mm.

7 age 7 of 23 Circuit-breakers for overcurrent protection Test item particulars... Type of circuit-breaker... : SGBi, ALBi6K, ALB6K Number of poles... : 1-3- rotection against external influences... : enclosed unenclosed Method of mounting... : surface flush Method of connection... :.not associated with the mechanical mounting associated with the mechanical mounting Type of terminal... : Instantaneous tripping current... : 2 I t characteristic...: Value of rated operational voltage (Ue)... : Value of rated current (In)... : 1-+N 3-+N a) b) 2-4- panel board a) b) screw pillar screw lessa) plug-in a) copper conductors b) aluminium conductors B C a) b) cage flat quick connect a) screw-in D Energy limiting class 3: B and C type of 4 A to 32 A, Energy limiting class 1: B and C type of 40 A to 63 A according to EN V 230 V 240 V 120/240 V 230/400 V 400 V 240/415 V for 1 circuit-breaker 415 V for 2, 3, 4 circuit-breakers 4, 6, 10, 16, 20, 25, 32, 40, 50, 63 A Value of rated frequency... : 50 Hz 60 Hz Ambient air temperature ( C)... : 30 C 40 C Rated short-circuit capacity (Icn)... : 1,5 ka 10 ka 3 ka 15 ka 4,5 ka 20 ka Rated impulse withstand voltage (Uimp) 2,5 kv 4 kv declared kv lug Other C 6 ka 25 ka

8 age 8 of 23 IEC Clause Requirement + Test Result - Remark TESTS A1 1 sample #7: SGBi, C63, 1 Verdict SH SHA-001except clause 6 6 MARKING AND OTHER INFORMATION Circuit-breaker marked with: a) Manufacturer s name or trade mark...: MAXGE b) Type designation, catalogue number or other SGBi serial number...: c) Rated voltage (V)...: 240 / 415 V~ d) Rated current without symbol "A", preceded C63 by the symbol of instantaneous tripping...: e) Rated frequency (Hz)...: f) Rated short circuit capacity (A)...: 6000 in a rectangle g) Wiring diagram h) Ambient air temperature, if different from 30 C i) Degree of protection, if different from I20 j) For D-type circuit-breakers: the maximum instantaneous tripping current, if higher than 20 In see table 2) k) Rated impulse withstand voltage Uimp if it is 2,5 kv l) Making and breaking capacity on an individual protected pole of multipole circuit-breakers (Icn1), if different from Icn Marking d) shall be readily visible when the CB is installed If, for small devices, the available space is insufficient, markings a), b), c), e), f), h), j) and l) may be put on the side or on the back of the CB Marking g) may be on the inside of any cover which has to be removed in order to connect the supply wires but shall not be on a label loosely attached to the CB Any other information not marked shall be given in the manufacturer s documentation The suitability for isolation, which is provided by all circuit-breakers of this standard, may be indicated by the symbol on the device I2t characteristic (documentation)

9 age 9 of 23 IEC Clause Requirement + Test Result - Remark Verdict Symbols on supply and load terminal Terminal for neutral conductor N Earthing terminal if any (IEC ) On - off position shall be clearly indicated - 0 I - For push-button CB the off push-button shall either be red or be marked with the symbol 0 Red not used for other push-button For CB with multiple current ratings, the maximum value is marked, the adjusted value indicated without ambiguity TESTS A1 1 sample #8: SGBi, B32, 4 SH SHA-004 except clause 6 6 MARKING AND OTHER INFORMATION Circuit-breaker marked with: a) Manufacturer s name or trade mark...: MAXGE b) Type designation, catalogue number or other SGBi serial number...: c) Rated voltage (V)...: 415 V~ d) Rated current without symbol "A", preceded B32 by the symbol of instantaneous tripping...: e) Rated frequency (Hz)...: f) Rated short circuit capacity (A)...: 6000 in a rectangle g) Wiring diagram h) Ambient air temperature, if different from 30 C i) Degree of protection, if different from I20 j) For D-type circuit-breakers: the maximum instantaneous tripping current, if higher than 20 In see table 2) k) Rated impulse withstand voltage Uimp if it is 2,5 kv l) Making and breaking capacity on an individual protected pole of multipole circuit-breakers (Icn1), if different from Icn Marking d) shall be readily visible when the CB is installed

10 age 10 of 23 IEC Clause Requirement + Test Result - Remark Verdict If, for small devices, the available space is insufficient, markings a), b), c), e), f), h), j) and l) may be put on the side or on the back of the CB Marking g) may be on the inside of any cover which has to be removed in order to connect the supply wires but shall not be on a label loosely attached to the CB Any other information not marked shall be given in the manufacturer s documentation The suitability for isolation, which is provided by all circuit-breakers of this standard, may be indicated by the symbol on the device I2t characteristic (documentation) Symbols on supply and load terminal Terminal for neutral conductor N Earthing terminal if any (IEC ) On - off position shall be clearly indicated - 0 I - For push-button CB the off push-button shall either be red or be marked with the symbol 0 Red not used for other push-button For CB with multiple current ratings, the maximum value is marked, the adjusted value indicated without ambiguity TESTS A2 SH SHA-001, 002, 004 TESTS B SH SHA-001, 004 TESTS C SH SHA-001, 002, 004 TESTS D SH SHA-001, 004

11 age 11 of 23 IEC Clause Requirement + Test Result - Remark TESTS E1 SH SHA-001, 002, 004 and result in this report TESTS E1 3 samples ALB6K, C63, 2 1# # -3# Test E1: Test at service short-circuit capacity Service short-circuit capacity (Ics)...: 6000 A Test circuit: figure...: Figure 3 Test voltage 1,1 Un 437,3 V rospective current...: 6000 A rospective current obtained...: 6030 A ower factor...: 0,65-0,70 ower factor obtained...: 0,67 Sequence...: O - O - CO T (min)...: 3 min Test in free air copper wire F : resistor R : a = 45 mm 0,12 mm / 0,75 Ohm / Test in enclosures copper wire F : 0,12 mm / resistor R : 0,75 Ohm / 0,16 mm 1,5 Ohm 0,16 mm 1,5 Ohm Ieak (A) max. value...: 2 Max. I²t (ka s) L1/L Verdict 1# 2# 3# 4,4 ka 4,2 ka 4,4 ka 1# 2# 3# 56,9 ka2s 58,6 ka2s 53,4 ka2s - No permanent arcing - No flash-over between poles or between poles and frame - No blowing of the fuses F and F - olyethylene foil shows no holes After the test: The circuit-breakers shall show no damage impairing their further use and shall maintenance, withstand the following tests.

12 age 12 of 23 IEC Clause Requirement + Test Result - Remark a) leakage current across open contacts, according to , each pole is supplied at a voltage 1,1 times Un.= V. The circuit breaker is in the open position 457 V The leakage current shall not exceed 2 ma L1 L2 Verdict 1# 2# 3# 13 µa 44 µa 5 µa 5 µa 5 µa 22 µa Electric strength test: Test voltage 1500 V (see 9.7.2) 1500 V a) b) c) d) e) 2000 V Test current 0.85x non-tripping current (1,13 IN ) 60,5 A - assed for 1h - assed for 2h Current is then steadily increased to 1,1 x tripping current (1,45 IN ) within 5s Tripping within 1 hour / 2 hour 100,5 A 2# 3# 87 s 112 s 73 s ALBi6K, C63, 4 4# # TESTS E1 3 samples # -6# Test E1: Test at service short-circuit capacity Service short-circuit capacity (Ics)...: 6000 A Test circuit: figure...: Figure 3 Test voltage 1,1 Un 436,3 V rospective current...: 6000 A rospective current obtained...: 6044 A ower factor...: 0,65-0,70 ower factor obtained...: 0,67 Sequence...: O - CO - CO T (min)...: 3 min Test in free air copper wire F : resistor R : a = 45 mm 0,12 mm / 0,75 Ohm / 0,16 mm 1,5 Ohm

13 age 13 of 23 IEC Clause Requirement + Test Test in enclosures copper wire F : 0,12 mm / resistor R : 0,75 Ohm / Result - Remark Verdict 0,16 mm 1,5 Ohm Ieak (A) max. value...: L1 L2 L3 L4 2 Max. I²t (ka s) L1 L2 L3 4# 5# 6# 4,5 ka 5,3 ka 4,4 ka 5,2 ka 4,7 ka 4,7 ka 3,8 ka 4,2 ka 5,1 ka 4# 5# 6# 63,6 2 ka s 91,7 ka2s 48,5 ka2s 81,4 2 ka s 86,6 ka2s 61,8 ka2s 48,6 2 ka s 56,5 ka2s 97,0 ka2s L No permanent arcing - No flash-over between poles or between poles and frame - No blowing of the fuses F and F - olyethylene foil shows no holes After the test: The circuit-breakers shall show no damage impairing their further use and shall maintenance, withstand the following tests. a) leakage current across open contacts, according to , each pole is supplied at a voltage 1,1 times Un.= V. The circuit breaker is in the open position The leakage current shall not exceed 2 ma L1 L2 L3 L4 457 V 4# 5# 6# 20 µa 81 µa 5 µa 5 µa 45 µa 5 µa 76 µa 5 µa 34 µa 5 µa 5 µa 5 µa Electric strength test: Test voltage 1500 V (see 9.7.2) 1500 V a) b) c) d)

14 age 14 of 23 IEC Clause Requirement + Test Result - Remark Verdict e) 2000 V Test current 0.85x non-tripping current (1,13 IN ) 60,5 A - assed for 1h - assed for 2h Current is then steadily increased to 1,1 x tripping current (1,45 IN ) within 5s Tripping within 1 hour / 2 hour 100,5 A 4# 5# 6# 56 s 47 s 73 s TESTS E2 TESTS E3 Annex E Annex J Annex K Annex L

15 age 15 of 23 IEC60898_1D - ATTACHMENT Clause Requirement + Test Result - Remark Verdict Annex 1 ATTACHMENT TO TEST REORT IEC EUROEAN GROU DIFFERENCES AND NATIONAL DIFFERENCES Circuit-breakers for over current protection for household and similar installations art 1 - Circuit-breakers for a.c. operation Differences according to... : EN :2003+A1:2004+A11:2005+A12:2008+A13:2012 Attachment Form No... : EU_GD_IEC60898_1C Attachment Originator... : DEKRA Master Attachment... : Copyright 2014 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. CENELEC COMMON MODIFICATIONS (EN) Test item particulars... Circuit-breakers for overcurrent protection Type of circuit-breaker...: SGBi, ALBi6K, ALB6K Energy limiting class...: Class 1 for B and C type 40 A to 63 A circuit breakers Class 3 for B and C type 4 A to 32 A circuit breakers Value of rated operational voltage (Ue)...: 230 V 240 V 230 / 400 V 400 V 240 / 415 V for 1 circuit-breaker 415 V for 2, 3 and 4 circuit-breakers Rated impulse withstand voltage (Uimp) 4 kv Requirements for construction and operation SH SHA-001, 004 GENERAL SH SHA-001, 004 TESTS A 6 MARKING AND OTHER INFORMATION 6.1 Standard marking: 6000 in a rectangle f) Rated short circuit capacity in A within a rectangle, without symbol A... h) calibration temperature, if different from 30 C j) Energy limiting class in a square in accordance 1 for 40 A to 63 A circuit with annex ZA. breakers 3 for 4 A to 32 A circuit breakers

16 age 16 of 23 IEC60898_1D - ATTACHMENT Clause Requirement + Test Result - Remark Verdict k) Making and breaking capacity on an individual Icn1 = Icn = 6000 A protected pole of multipole circuit-breakers (Icn1), if different from Icn Additional marking Additional marking to other standards (EN or IEC or other) is allowed under the follow conditions: - the circuit-breaker shall comply with all the requirements of the additional standard; - the relevant standard to which the additional marking refers shall be indicated adjacent to this marking and shall be clearly differentiated or separated from the standard marking according to cl. 6.1 Compliance is checked by inspection and by carrying out all the test sequences required by the relevant standard. Equivalent or less severe test sequences need not be repeated. Guidance table for marking Each MCB shall be marked in a durable manner with all or, for small apparatus, according table for marking TESTS C Test C2 :Short-circuit test on circuit-breakers 2 for use in IT systems TESTS D TESTS E3 SH SHA-001, 002, 004 SH SHA-001, 002, 004 SH SHA-001, 004

17 age 17 of 23 IEC60898_1D - ATTACHMENT Clause Requirement + Test Result - Remark Verdict Annex ZC (normative) EN Special national conditions For the countries in which the relevant special national conditions apply these provisions are normative, for other countries they are informative. Austria, Czech Republic, Denmark, Netherlands, Norway and Switzerland The upper limit of current for use of screw less terminals is 16 A - K1 Austria, Belgium, Denmark, France, Germany, Italy, ortugal, Spain, Sweden, Switzerland, and United Kingdom Only universal screwless type terminals are accepted. Belgium, France, Italy, ortugal, Spain, and United Kingdom K The use of circuit-breakers with flat quick-connect terminations for rated currents up to and including 20 A is accepted. Belgium, France, Italy, ortugal, Spain, and United Kingdom J.1 J.3.3 The use for rated currents up to and including 20 A - -

18 age 18 of 23 hotographs SGBi, Front view, 4 SGBi, Side view, 4

19 age 19 of 23 SGBi, Side view, 4 SGBi, Internal view, 4

20 age 20 of 23 ALBi6K, Front view, 4 ALBi6K, Side view, 4

21 age 21 of 23 ALBi6K, Side view, 4 ALBi6K, Internal view, 4

22 age 22 of 23 ALB6K, Front view, 4 ALB6K, Side view, 4

23 age 23 of 23 ALB6K, Side view, 4 ALB6K, Internal view, 4

Installation Couplers intended for permanent connection in fixed installation

Installation Couplers intended for permanent connection in fixed installation Test Report issued under the responsibility of: TEST REORT Installation Couplers intended for permanent connection in fixed installation Report Reference No....: 2167493.50-DCC Date of issue...: 2013-11-26

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 31282706.003 Date of issue... : 22 nd March,

More information

020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB)

020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB) 020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS Page 1.0 Scope 3 2.0 System Parameters 3 3.0 Service

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 221868-CI3-2 CB DE1-56824 Date of issue...

More information

Testing Laboratory...: TÜV Rheinland Taiwan Ltd., Taichung Laboratory. Address...: 10F, No.219, Min Chuan Road, Taichung 403, Taiwan.

Testing Laboratory...: TÜV Rheinland Taiwan Ltd., Taichung Laboratory. Address...: 10F, No.219, Min Chuan Road, Taichung 403, Taiwan. 11009797 002 age 1 of 11 TEST REORT Flat non-rewirable two-pole plugs, 2.5 A 250 V, with cord, for the connection of class II - equipment for household and similar purposes Report Reference No....: 11009797

More information

Amendment to Test Report

Amendment to Test Report Test Report issued under the responsibility of www.nemko.com Amendment to Test Report This Amendment is valid only together with the main Test Report Report No.... : 277779 Main Report No.... : 246847

More information

TEST REPORT IEC Low-voltage switchgear and control gear Part 7-4: Ancillary equipment PCB terminal blocks for copper conductors

TEST REPORT IEC Low-voltage switchgear and control gear Part 7-4: Ancillary equipment PCB terminal blocks for copper conductors r Test Report issued under the responsibility of: TEST REORT Low-voltage switchgear and control gear art 7-4: Ancillary equipment CB terminal blocks for copper s Report Number.... : 2169331.75 Date of

More information

AS/NZS AS/NZS

AS/NZS AS/NZS TEST REORT AS/NZS 4777.2 AS/NZS 4777.3 Grid connection of energy systems via inverters Grid protection requirements Report reference number... : 13TH0287-AS/NZS 4777_0 Date of issue......: 2014-01-22 Total

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 207809-CI3-3 CB DE1-9640/A2 Date of issue...

More information

ENEC LICENCE. Licence No. ENEC Page 1/3 Date of Issue

ENEC LICENCE. Licence No. ENEC Page 1/3 Date of Issue ENEC LICENCE Licence No. ENEC-01360 Page 1/3 Date of Issue 2016-03-04 Licence Holder WAGO KONTAKTTECHNIK GMBH & CO KG HANSASTRASSE 27 MINDEN, 32423 Germany Production site WAGO CONTACT SA ROUTE DE L'INDUSTRIE

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 16059155 001 Date of issue... : Apr.24,

More information

Installation Couplers intended for permanent connection in fixed installation

Installation Couplers intended for permanent connection in fixed installation age 1 of 14 Report o.47462 / rev.1 Test Report issued under the responsibility of: TEST REORT IEC 61535 Installation Couplers intended for permanent connection in fixed installation Report Reference o....

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 1510050STO-001 Date of issue... : 26 October

More information

TEST REPORT IEC Part 1: General requirements for basic safety and essential performance

TEST REPORT IEC Part 1: General requirements for basic safety and essential performance jhćmtc Test Report issued under the responsibility of: TEST REPORT IEC 60601-1 Part 1: General requirements for basic safety and essential performance Report Number.... : T223-0128/16 Date of issue...

More information

Amendment to Test Report

Amendment to Test Report Test Report issued under the responsibility of www.nemko.com Amendment to Test Report This Amendment is valid only together with the main Test Report Report No.... : 277782 Main Report No.... : 261294

More information

TEST REPORT IEC Connectors Safety requirements and tests

TEST REPORT IEC Connectors Safety requirements and tests IECEE OD-2020-F1:2017 IEC 2017 Ed.1.0 TRF Template 2017-05-17 Test Report issued under the responsibility of: TEST REORT Connectors Safety requirements and tests Report Number... : 249955-TL6-1 Date of

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 1510053STO-001 Date of issue... : 2 November

More information

TEST REPORT EN LED modules for general lighting Safety specifications

TEST REPORT EN LED modules for general lighting Safety specifications TEST REORT LED modules for general lighting Safety specifications Report Reference No...: 3007562.51-QUA/LI Date of issue...: 2011-03-28 Total number of pages... CB Testing Laboratory...: Address...: Applicant

More information

Menu. Home About this portal Latest updates. Print Save Resource detail Citations. Table of Contents

Menu. Home About this portal Latest updates. Print Save  Resource detail Citations. Table of Contents Menu Home About this portal Latest updates Print Save Email Resource detail Citations AS/NZS 60898.1:2004 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar

More information

Annex I Tested by (name + signature)...: Approved by (name + signature)...: Date of issue... : 22/11/2012. TUV RHEINLAND ITALIA S.r.l.

Annex I Tested by (name + signature)...: Approved by (name + signature)...: Date of issue... : 22/11/2012. TUV RHEINLAND ITALIA S.r.l. TEST REORT Rotating electrical machines art 5: Degrees of protection provided by the integral design of rotating electrical machines (I code) Classification Report Reference No....: 28105442 002 Annex

More information

TEST REPORT IEC Connectors Safety requirements and tests

TEST REPORT IEC Connectors Safety requirements and tests IECEE OD-2020-F1:2017 IEC 2017 Ed.1.0 TRF Template 2017-05-17 Test Report issued under the responsibility of: TEST REORT Connectors Safety requirements and tests Report Number... : 250150-TL6-1 Date of

More information

013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS

013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS 013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEYLON ELECTRICITY BOARD SRI LANKA Specification for MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEB Specification

More information

TEST REPORT DIN V VDE V

TEST REPORT DIN V VDE V Test Report issued under the responsibility of: TEST REORT DIN V VDE V 0126-1-1 Report Number....: EFSH16041203-IE-01-L12 Date of issue...: 2016-11-28 Total number of pages... 25 pages Testing Laboratory...

More information

TEST REPORT DIN V VDE V

TEST REPORT DIN V VDE V Test Report issued under the responsibility of: TEST REORT DIN V VDE V 0126-1-1 Report Number....: EFSH16041203-IE-01-L21 Date of issue...: 2016-11-28 Total number of pages... 26 pages Testing Laboratory...

More information

LIA Laboratories Limited

LIA Laboratories Limited LIA Laboratories Limited Certificate of Test Reference LH1014B This is to confirm that: S Lilley & Son Ltd 80 Alcester Street Birmingham West Midlands B12 0QE Model Reference(s): 7701E/AB123, 7702E/AB123,

More information

TEST REPORT IEC Luminaires Part 2: Particular requirements: Section Two Recessed luminaires

TEST REPORT IEC Luminaires Part 2: Particular requirements: Section Two Recessed luminaires Test Report issued under the responsibility of www.nemko.com Report Reference No.... : 220130 Date of issue... : 2012-09-13 Total number of pages... 6 TEST REPORT IEC 60598-2-2 Luminaires Part 2: Particular

More information

Page 3 of 32 Report No Summary of testing:

Page 3 of 32 Report No Summary of testing: age 3 of 32 Report No. 27121998 001 Summary of testing: Tests performed (name of test and test clause): 22 114 model is chosen as representative. Below clasues are applied to appliances: 8. Marking 9.

More information

Page 3 of 34 Report No Part I

Page 3 of 34 Report No Part I www.tuv.com age 3 of 34 Report No. 14717090 001 art I List of Attachments (including a total number of pages in each attachment): Besides of the tests according to : 2008 +A1 +A2, the following tests are

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Test Report issued under the responsibility of: NCB TÜ V SÜ D SB te Ltd 1 Science ark Drive, Singapore 118221 TEST REORT IEC 60950-1 Information technology equipment Safety art 1: General requirements

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number....: T223-0035/16 Date of issue...: 2016-02-01

More information

TEST REPORT IEC Part 2: Particular requirements: Section 11: Miscellaneous electronic circuits used with luminaires

TEST REPORT IEC Part 2: Particular requirements: Section 11: Miscellaneous electronic circuits used with luminaires Test Report issued under the responsibility of: TEST REORT art 2: articular requirements: Section 11: Miscellaneous electronic circuits used with luminaires Report Number...: 2213248.50 Date of issue...:

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 207809-CI3-2 CB DE1-49619/A2/B1/M2 Date

More information

TEST REPORT IEC Part 1: General requirements for basic safety and essential performance

TEST REPORT IEC Part 1: General requirements for basic safety and essential performance Test Report issued under the responsibility of: TEST REPORT IEC 60601-1 Part 1: General requirements for basic safety and essential performance Report Number.... : T223-0347/14 Date of issue... : 2014-12-05

More information

Intertek Testing Services Shanghai Address... : Building No.86, 1198 Qinzhou Road (North), Shanghai , China Applicant s name... : GlobTek, Inc.

Intertek Testing Services Shanghai Address... : Building No.86, 1198 Qinzhou Road (North), Shanghai , China Applicant s name... : GlobTek, Inc. Test Report issued under the responsibility of: TEST REORT IEC 62133, First Edition Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed

More information

TEST REPORT IEC Switches for household and similar fixed-electrical installations Part 2-1: Particular requirements - Electronic switches

TEST REPORT IEC Switches for household and similar fixed-electrical installations Part 2-1: Particular requirements - Electronic switches TEST REORT Switches for household and similar fixed-electrical installations art 2-1: articular requirements - Electronic switches Report Reference No.... : 102639859CRT-001a Date of issue... : 09/28/2016

More information

TEST REPORT IEC Part 2: Particular requirements: Section Thirteen d.c. or a.c. supplied electronic controlgear for LED modules

TEST REPORT IEC Part 2: Particular requirements: Section Thirteen d.c. or a.c. supplied electronic controlgear for LED modules age 1 of 40 Test Report issued under the responsibility of: Intertek Testing Services Shenzhen Ltd. Guangzhou Branch TEST REORT art 2: articular requirements: Section Thirteen d.c. or a.c. supplied electronic

More information

L7486R Cromwell Word Distribution 8 Inch Bench Grinder KOBE GB 200 December 2009 MD

L7486R Cromwell Word Distribution 8 Inch Bench Grinder KOBE GB 200 December 2009 MD age 1 of 15 L7486R Cromwell Word Distribution 8 Inch Bench Grinder KOBE GB 200 December 2009 MD age 2 of 15 SUMMARY TEST REORT BS EN 61029-1: 2000, with BS EN 61029-2-4: 2003 Safety of transportable motor-operated

More information

Test report for mechanical switches according to IEC Switches for appliances Part 1: General requirements

Test report for mechanical switches according to IEC Switches for appliances Part 1: General requirements Test Report issued under the responsibility of: Test report for mechanical switches according to Switches for appliances art 1: General requirements Report reference No.... : 4312037.50 Date of issue...

More information

TEST REPORT IEC LED modules for general lighting Safety specifications

TEST REPORT IEC LED modules for general lighting Safety specifications Test Report issued under the responsibility of: TEST REORT LED modules for general lighting Safety specifications Report Number...: 2173700.50 Date of issue... : 20140923 Total number of pages... 33 Applicant

More information

TEST REPORT PN-EN Light and lighting. Measurement and presentation of photometric data of lamps and luminaires

TEST REPORT PN-EN Light and lighting. Measurement and presentation of photometric data of lamps and luminaires TEST REPORT PN-EN 13032 Light and lighting. Measurement and presentation of photometric data of lamps and luminaires Report Number.... : BS-3/161/B/5/15 Date of issue... : 03.02.2016 Total number of pages...

More information

LIA Laboratories Limited

LIA Laboratories Limited LIA Laboratories Limited Certificate of Conformity Reference LH1012R This is to certify that: S Lilley & Son Ltd 80 Alcester Street Birmingham West Midlands B12 0QE Model Reference(s): 7601E, 7602E, 7603E,

More information

LVD TEST REPORT EN : 2006+A12: MEASUREMENT AND TEST REPORT For. Ingtron Enterprise Co., Ltd.

LVD TEST REPORT EN : 2006+A12: MEASUREMENT AND TEST REPORT For. Ingtron Enterprise Co., Ltd. LVD TEST REORT EN 60950-1: 2006+A12: 2011 MEASUREMENT AND TEST REORT For Ingtron Enterprise Co., Ltd. No. 211-1, Qingfeng Road, Qingxi Town, Dongguan City, Guangdong, China Model: reference page 2 Feb.

More information

LIA Laboratories Limited

LIA Laboratories Limited LIA Laboratories Limited Certificate of Conformity Reference LH1012J This is to certify that: S Lilley & Son Ltd 80 Alcester Street Birmingham West Midlands B12 0QE Model Reference(s): 7607ET roduct Description(s):

More information

Page 2 of 6. Summary of testing The clause 17 and clause 29 are considered and check on the appliance.

Page 2 of 6. Summary of testing The clause 17 and clause 29 are considered and check on the appliance. 12012453 003 age 2 of 6 Summary of testing The clause 17 and clause 29 are considered and check on the appliance. Test items particulars Serial umber... : rototype samples Additional information... : (.A.)...

More information

TEST REPORT IEC and/or EN Self-ballasted lamps for general lighting services Safety requirements

TEST REPORT IEC and/or EN Self-ballasted lamps for general lighting services Safety requirements TEST REORT IEC 60968 and/or EN 60968 Self-ballasted lamps for general lighting services Safety requirements Report reference No.... : 3006889.50-QUA/LI Tested by (printed name and signature)... : Cliff

More information

Test Report issued under the responsibility of: Report Number... : CB131104C Date of issue... : Total number of pages...

Test Report issued under the responsibility of: Report Number... : CB131104C Date of issue... : Total number of pages... Test Report issued under the responsibility of: TEST REORT Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and

More information

TEST REPORT IEC Plugs and socket-outlets for household and similar purposes Part 1: General requirements

TEST REPORT IEC Plugs and socket-outlets for household and similar purposes Part 1: General requirements Test Report issued under the responsibility of: TEST REPORT IEC 60884-1 Plugs and socket-outlets for household and similar purposes Part 1: General requirements Report Reference No.... : Date of issue...

More information

Miniature Circuit Breaker

Miniature Circuit Breaker Introduction - Miniature Circuit Breaker (MCB) SALIENT FEATURES SALIENT FEATURES Standards MCBs conform to the latest standard IS 8828: 1996/IEC: 898 1995 Mid-Trip Position The Mid trip position of the

More information

Page 2 of 39 Report No. CTI PA Testing location:

Page 2 of 39 Report No. CTI PA Testing location: age 2 of 39 Report No. CTI A 2841-2 Tests performed (name of test and test clause): according to :2009: 5 - Interface characteristics, 6 Information, 7 - Service conditions, 10.2.3.3 - Verification of

More information

Test Result No.1. Lead (Pb) % ND See comment if > % Cadmium (Cd) % ND Mercury (Hg) % ND

Test Result No.1. Lead (Pb) % ND See comment if > % Cadmium (Cd) % ND Mercury (Hg) % ND Reference No.: WTF16F0961094C age 2 of 5 Test Results: Test Item(s) Unit Test Result No.1 MDL Maximum Allowable Limit Lead (b) % ND 0.0002 See comment if > 0.004 % Cadmium (Cd) % ND 0.0002 0.002 Mercury

More information

TEST REPORT IEC Luminaires Part 2: Particular requirements Section 2: Recessed luminaires

TEST REPORT IEC Luminaires Part 2: Particular requirements Section 2: Recessed luminaires age 1 of 40 TEST REORT IEC 60598-2-2 Luminaires art 2: articular requirements Section 2: Recessed luminaires Report Number.... : 7040216100405-00 Date of issue... : 2016-11-18 Total number of pages...

More information

COVER PAGE FOR TEST REPORT

COVER PAGE FOR TEST REPORT Issue Date: 2007-05-22 Page 1 of 2 Report Reference # E116994-A35-CB-1 Amendment 1 2008-04-24 COVER PAGE FOR TEST REPORT Test Item Description: DC Power Supplies Model/Type Reference: Class I Models: GNT2XXX-YYY

More information

Test Report issued under the responsibility of: Report Reference No... : AS9-7 Date of issue... : Total number of pages...

Test Report issued under the responsibility of: Report Reference No... : AS9-7 Date of issue... : Total number of pages... Test Report issued under the responsibility of: TEST REORT EHA-DACH Testing Regulation Supplemental requirements for granting the international quality label for heat pumps Testing of Air/Water Heat umps

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number... : 30581696.032 Date of issue... : 14 July 2015

More information

< > Page 2 of 84

< > Page 2 of 84 age 2 of 84 articulars: test item vs. test requirements Equipment mobility...: Building-in Operating condition...: Continuous Mains supply tolerance (%)...: -10%, +10% Tested for IT power systems...: Yes

More information

DX³ 4-pole RCBO 6000 A/10 ka

DX³ 4-pole RCBO 6000 A/10 ka 87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ 4-pole RCBO CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

Presented to the IAPMO Standards Review Committee on December 9, 2013

Presented to the IAPMO Standards Review Committee on December 9, 2013 Summary of Substantive Changes between the 2010 edition including Updates No. 1 and No. 2 dated September 2010 and August 2011 and the 2013 edition of CSA C22.2 No. 14 Industrial control equipment Presented

More information

TEST REPORT. NO.: A001T Date: Jul 29, 2014 Page 1 of 7

TEST REPORT. NO.: A001T Date: Jul 29, 2014 Page 1 of 7 TEST REORT NO.: A001T140610025001-2 Date: Jul 29, 2014 age 1 of 7 Applicant: EASY WAY(HONG KONG) CO.,LTD Address: Flat D, 13F Sing Kong Building 233 Lockhard Wanchai Hong Kong Report on the submitted sample

More information

TEST REPORT IEC Luminaires Part 2: Particular requirements: Section One Fixed general purpose luminaires

TEST REPORT IEC Luminaires Part 2: Particular requirements: Section One Fixed general purpose luminaires Test Report issued under the responsibility of: TEST REORT Luminaires art 2: articular requirements: Section One Fixed general purpose luminaires Report Reference No... : 2170798.50 Date of issue... :

More information

TEST REPORT IEC60884_1C. Plugs and socket-outlets for household and similar purposes Part 1: General requirements

TEST REPORT IEC60884_1C. Plugs and socket-outlets for household and similar purposes Part 1: General requirements TEST REORT lugs and socket-outlets for household and similar purposes art 1: General requirements Report Reference No.... : SH12030248-001 Date of issue... : 2012-04-28 Total number of pages 46 Testing

More information

TEST REPORT IEC Safety of household and similar electrical appliances Part 2 : Particular requirements for fans

TEST REPORT IEC Safety of household and similar electrical appliances Part 2 : Particular requirements for fans Test Report issued under the responsibility of: Report Number....: TEST REORT Safety of household and similar electrical appliances art 2 : articular requirements for fans GZ10040377-1R1 Date of issue...:

More information

15 16 MCCBs for Power Distribution Technical Specification Frame 100A 250A 250A 400A 400A 630A 800 / 1000 / 1250 Type C DN0-100 D DN1-250 N DN2-250 D N S H DN3B-400 DN3-400 D N D N S V DN3-630 DN4-1250

More information

LEXIC Curv LIMOGES Cedex. Cats N (s) : /68/87/88, /48, /84/85, /76/77/95/96/97, /71/72 1.

LEXIC Curv LIMOGES Cedex. Cats N (s) : /68/87/88, /48, /84/85, /76/77/95/96/97, /71/72 1. 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 LEXIC MCB s DX-H 80A, 100A, 125A Curv urves B and C CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1

More information

Test Report issued under the responsibility of:

Test Report issued under the responsibility of: age 1 of 30 Test Report issued under the responsibility of: Intertek Testing Services Shenzhen Ltd. Guangzhou Branch TEST REORT Luminaires art 2: articular requirements: Section Six Luminaires with built-in

More information

Test Report issued under the responsibility of:

Test Report issued under the responsibility of: age 1 of 30 Test Report issued under the responsibility of: Intertek Testing Services Shenzhen Ltd. Guangzhou Branch TEST REORT Luminaires art 2: articular requirements: Section Six Luminaires with built-in

More information

AGREEMENT. (Revision 2, including the amendments entered into force on 16 October 1995) Addendum 102: Regulation No. 103

AGREEMENT. (Revision 2, including the amendments entered into force on 16 October 1995) Addendum 102: Regulation No. 103 21 March 1997 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR

More information

Ref No: Date: February 8, 1995 INDUSTRIAL CONTROL EQUIPMENT NO. 2

Ref No: Date: February 8, 1995 INDUSTRIAL CONTROL EQUIPMENT NO. 2 Ref No: 95-013 Date: February 8, 1995 INDUSTRIAL CONTROL EQUIPMENT NO. 2 To: Manufacturers of Industrial Control Equipment Subject: Publication of Technical Information Letter (T.I.L.) No D-21 on Interim

More information

045 : 2000 CEB STANDARD

045 : 2000 CEB STANDARD 045 : 2000 CEB STANDARD LOW VOLTAGE FUSE SWITCH DISCONNECTOR CEYLON ELECTRICITY BOARD SRI LANKA Specification for LOW VOLTAGE FUSE SWITCH DISCONNECTOR CEB Standard 045 : 2000 CEYLON ELECTRICITY BOARD No.

More information

RX 3 M.C.B A up to 63 A

RX 3 M.C.B A up to 63 A 87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION CLC/TS 50457-1 SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION March 2008 ICS 43.120 Supersedes ENV 50275-2-3:1998 English version Conductive charging for electric vehicles - Part

More information

Electric Vehicle Charging Safety Guidelines Part 2: Selection and Installation Edition DRAFT

Electric Vehicle Charging Safety Guidelines Part 2: Selection and Installation Edition DRAFT Date of publication: 1 November 2016Not yet published Issued by: Mark Wogan, Manager Energy Safety WorkSafe New ZealandNot yet issued Electric Vehicle Charging Safety Guidelines Part 2: Selection and Installation

More information

3 - Protection components Motor circuit-breakers

3 - Protection components Motor circuit-breakers Contents 0 - Protection components Motor circuit-breakers protection components for the motor protection Thermal-magnetic motor circuit-breakers Selection guide..............................................page

More information

Test Report issued under the responsibility of: Report Number...:

Test Report issued under the responsibility of: Report Number...: Test Report issued under the responsibility of: TEST REORT Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and

More information

RX 3 M.C.B A up to 63 A

RX 3 M.C.B A up to 63 A 87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A Cat. N (s): 4 197 49 to 4 199 23 CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions...

More information

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements Issue Date: 2017-10-20 Page 1 of 72 Report Reference # E135494-A115-CB-1 Test Report issued under the responsibility of: Report Reference No... : TEST REPORT IEC 60950-1 Information technology equipment

More information

TEST REPORT. IEC 62133: 2012 (Second Edition)

TEST REPORT. IEC 62133: 2012 (Second Edition) Test Report issued under the responsibility of: TEST REORT, Second Edition Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary

More information

MS General Information Extended Product Type: MS

MS General Information Extended Product Type: MS MS132-1.6 General Information Extended Product Type: MS132-1.6 Product ID: 1SAM350000R1006 EAN: 4013614400063 Catalog Description: MS132-1.6 Manual Motor Starter Long Description: The MS132-1.6 manual

More information

RX 3 MCB 4500 A Phase + Neutral, neutral on left side

RX 3 MCB 4500 A Phase + Neutral, neutral on left side 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 RX 3 MCB 4500 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information

TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH

TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH MAHARASHTRA STATE ELECTRICITY DISTRIBUTION COMPANY LTD. PAGE 1 OF 7 TECHNICAL SPECIFICATION FOR 11 KV AUTOMATIC CAPACITOR SWITCH 1.0 SCOPE:

More information

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements Issue Date: 2015-06-25 Page 1 of 65 Report Reference # E122103-A137-CB-2 Test Report issued under the responsibility of: Report Reference No... : TEST REPORT IEC 60950-1 Information technology equipment

More information

COVER PAGE FOR TEST REPORT

COVER PAGE FOR TEST REPORT Issue Date: 2005-08-06 Page 1 of 1 Report Reference # E137006-A6-CB-1 COVER PAGE FOR TEST REPORT Test Item Description: Model/Type Reference: Rating(s): Standards: Applicant Name and Address: Factory Location(s):

More information

PowerPact Q-Frame Molded Case Circuit Breakers and Switches (Types QB, QD, QG and QJ)

PowerPact Q-Frame Molded Case Circuit Breakers and Switches (Types QB, QD, QG and QJ) PowerPact Q-Frame Molded Case Circuit Breakers and Switches (Types QB, QD, QG and QJ) Catalog Class 734 0734CT0201R1/07 07 CONTENTS Description..............................................Page Description.............................................

More information

NCB Intertek Testing Services NA, Inc.

NCB Intertek Testing Services NA, Inc. Test Report issued under the responsibility of: NCB Intertek Testing Services NA, Inc. TEST REORT Safety requirements for electrical equipment for measurement, control, and laboratory use art 1: General

More information

DPX earth leakage DPX 3 -I earth leakage

DPX earth leakage DPX 3 -I earth leakage 87045 LIMOGES Cedex Phone :+33 05 55 06 87 87 Fax :+33 05 55 06 88 88 DPX 3 250 + earth leakage Reference(s) : 420 225/ 227/ 228/229/ 255/ 257/ 258/ 259/ 285/ 287/ CONTENTS PAGES 1. USE 1 2. RANGE 1 3.

More information

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements Issue Date: 2015-06-26 Page 1 of 73 Report Reference # E122103-A140-CB-2 Test Report issued under the responsibility of: Report Reference No... : TEST REPORT IEC 60950-1 Information technology equipment

More information

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements

TEST REPORT IEC Information technology equipment Safety Part 1: General requirements dftfdthdxfgxfx Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 31182226.016 Date of issue...

More information

REFERENCE CP_TSSPEC_138 0 DATE: JUNE 2006 PAGE: 1 OF 17 TITLE SPECIFICATION FOR POLE- MOUNTED AUTO-RECLOSERS TABLE OF CONTENTS

REFERENCE CP_TSSPEC_138 0 DATE: JUNE 2006 PAGE: 1 OF 17 TITLE SPECIFICATION FOR POLE- MOUNTED AUTO-RECLOSERS TABLE OF CONTENTS TITLE SPECIFICATION FOR POLE- MOUNTED DATE: JUNE 2006 PAGE: 1 OF 17 TABLE OF CONTENTS Page FOREWORD...2 INTRODUCTION...3 1 SCOPE...3 2 NORMATIVE S...3 3 DEFINITIONS AND ABBIATIONS...3 4 REQUIREMENTS...3

More information

Part 1: General requirements for basic safety and essential performance

Part 1: General requirements for basic safety and essential performance Test Report issued under the responsibility of: TEST REORT art 1: General requirements for basic safety and essential performance Report Number.... : 130501061SHA-001 Date of issue... : 2013-07-01 Total

More information

DRX 250 B/N/H Circuit breaker (not adjustable)

DRX 250 B/N/H Circuit breaker (not adjustable) 87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 References rences: /18/19/20/21/22/23/24/25/26/27/28/29/ 32/33 INDEX PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 4. MOUNTING 2 5.

More information

NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links

NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links Version:- 7.0 Date of Issue:- July 2017 Page 1 of 19 NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links 1. Purpose The purpose of this document is to detail

More information

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector

GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector GJL 100 A Molded Case Circuit Breaker GJL 75 A Motor Circuit Protector Catalog 0500CT9702R409 2009 Class 525/580 CONTENTS Description............................................. Page General Characteristics...................................

More information

SEM.Test Compliance Service Co., Ltd

SEM.Test Compliance Service Co., Ltd TEST REORT ST/SG/AC.10/11 Rev.5 Section 38.3 AMEDMETS TO THE FIFTH REVISED EDITIO OF THE RECOMMEDATIOS O THE TRASORT OF DAGEROUS GOODS, MAUAL OF TEST AD CRITERIA (Section 38.3: Lithium batteries) Report

More information

Page 2 of 23 UNT150420C11

Page 2 of 23 UNT150420C11 Page 2 of 23 UNT150420C11 United Nations, Recommendations on the Transport of Dangerous Goods, Manual of Test and Criteria (Rev. 5 th, Amendment 2), Section 38.3 Report Reference No.... : Compiled by...

More information

TEST REPORT. Low Voltage Directive 2006/95/EC. Report No.: STDGZ L

TEST REPORT. Low Voltage Directive 2006/95/EC. Report No.: STDGZ L TEST REORT Low Voltage Directive 2006/95/EC Report No.: STDGZ-01721-L 8th Floor, Block B,No.11 Caipin Road,GZ Science City,Tianhe, Guangzhou 510663, China TEST REORT IEC/EN 62040-1 Uninterruptible power

More information

Phase + Neutral, neutral on right side

Phase + Neutral, neutral on right side 87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX 3 MCB 6000 A / 10 ka Cat.. N (s): 4 074 67 / 68 / 69 / 70 / 71 / 72 / 73 / 74 / 75 / 76 / 77 / 78 / 79 ; 4 077 33 / 34

More information

ATX DPD Series Distribution Panelboards Flameproof

ATX DPD Series Distribution Panelboards Flameproof ATX DPD Series Distribution Panelboards Applications Protection and control of electrical equipment in hazardous areas where ignitable vapors, gases or highly combustible dusts are present. For installation

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation

More information

Installation instructions for ATS panel Ref:ATS --/2 M2GC705 Issue

Installation instructions for ATS panel Ref:ATS --/2 M2GC705 Issue FAQs I have installed the ATS panel but it won t go into the mains supply? First check all cables are in place and properly installed and that the control fuses (A-C on page 4) have not blown. If it still

More information

SHA-001 Date of issue...: Total number of pages Report Reference No...:

SHA-001 Date of issue...: Total number of pages Report Reference No...: TEST REORT lugs and socket-outlets for household and similar purposes art 2-1: General requirements on plugs and portable socket-outlets Report Reference No....: 130600884SHA-001 Date of issue...: 2013-07-09

More information

(1,5 modules per pole)

(1,5 modules per pole) 87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 DX 3 MCB 36kA, 80A CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...

More information