Pneumatic Products. the total systems approach to air preparation. Airline Accessories. Catalog 606

Transcription

1 Pneumatic Products irline ccessories atalog 606 the total systems approach to air preparation

2 Warning, Offer of Sale Pneumatic Products irline ccessories! WRNING FIURE OR IMPROPER SEETION OR IMPROPER USE OF TE PROUTS N/OR SYSTEMS ESRIE EREIN OR RETE ITEMS N USE ET, PERSON INJURY N PROPERTY MGE. This document and other information from The ompany, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker annifin orporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by The ompany, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled Offer of Sale. opyright 2013 Parker annifin orporation. ll Rights Reserved Pneumatic ivision 2 Richland, Michigan

3 Table of ontents Pneumatic Products irline ccessories ontrol Panel Products V / EZ ockout Integrated Fittings ccessories all / Plug Quick ouplings ose & Fittings Tubing & Fittings Safety Guide, Offer of Sale E F G J Safety Guide, Ontrol Panel Products ccessories Injection ubericators Stainless Steel FRs Miniature FRs ccessories ir Preparation Units Offer of Sale QUE V / EZ ockout Integrated Fittings all / Plug Quick ouplings ose & Fittings Tubing & Fittings Safety Guide, Offer of Sale Pneumatic ivision 3 Richland, Michigan

4 Notes Pneumatic Products irline ccessories Pneumatic ivision 4 Richland, Michigan

5 ontrol Panel Products Two and Push uttons Foot Pedal Operated Switches Visual Indicators Valve odies & ccessories Selector Switches asic Features Section asic Features...2 Push utton odies...3 Push uttons...4 Selector Switches...5 Valve odies & ccessories...6 imensions & ssembly...7 egend Plates, Specifications...8 Mounting...9 Visual Indicators 22mm (7/8")...10 Two-and Pneumatic ivision 1 Richland, Michigan

6 asic Features Push uttons Selector Switches Pneumatic Products irline ccessories asic Features UMN-MINE IOG requires devices such as push buttons and selector switches to provide command inputs. wide variety of these devices is available to meet most application needs. oth pneumatic and electrical switch bodies are available to match system technology. ll of these devices use the 22 mm (7/8") mounting standard. ontrol Panel Products Pneumatic Push utton & Visual Indicators MOUR PNEUMTI / EETRI PUS UTTONS s with electrical contact switches, pneumatic valve modules can be mounted on a number of different operating heads. Pneumatic normally non passing (NNP) is equivalent to electrical normally open (N.O.). Pneumatic normally passing (NP) is equivalent to electrical normally closed (N..). Note: Electrical switches can be stacked, but the rear connection on pneumatic switches prevents stacking. Therefore, when mixing electrical and pneumatic switch bodies on the same operator, the pneumatic switch must be mounted last. Valve odies & ccessories Visual Indicators PNEUMTI VISU INITORS n indicator ball is rotated by a pneumatic input, changing the visible color. The ball sits behind a clear plastic window, providing a wide field of view. The visual indicators are available in five brightly colored ay-glow paints for increased visibility. ike push buttons and selector switches, visual indicators use the 22mm (7/8") mounting standard. PX3911 PX4932 PX4931 Foot Pedal Operated Switches Two and Unactuated State ctuated State Push uttons Spring Return or atching Mushroom eaded Push uttons Standard Push utton Visual indicators Selector Switches 2 or 3 Positions, Fixed or ReturnTo enter Pneumatic ivision 2 Richland, Michigan

7 Numbers ontrol Panel Products Push utton odies With 3/2 Valve odies 5/32" Instant Straight onnections Flush Push uttons Selector Switches asic Features PX31112 Number PX31112 PX31113 PX31114 PX32512 PX41312 PX41313 PX41314 PX42312 Mushroom ead Push uttons (40mm iameter) olor lack Green Red lack lack Green Red lack PX41312 Function Spring Return Spring Return Spring Return Spring Return Type of Switching* NNP NNP+NP Single Universal 3-Way ual Universal 3-Way * Type of switching: Universal 3-way: valve can be connected either as NP or NNP as required by connecting the primary air supply to port 1 or port 3. Note: Mount up to three valves on mounting ring. PX31112 Number olor PX41312 Function Type of Switching* PX31112 lack 2 Maintained NNP PX32112 lack Positions with NNP+NNP PX32512 lack Std. andle NNP+NP PX32113 lack 3 Maintained NNP+NNP PX32513 lack Positions with Std. andle NNP+NP PX3211J5 PX41312 PX42312 PX42313 PX4231J5 lack lack lack lack lack 3 Positions, Spring Return to enter with ong andle 2 Maintained Positions with Std. andle 2 Maintained Positions with Std. andle 3 Maintained Positions with Std. andle 3 Maintained Positions with ong andle NNP+NNP Single Universal 3-Way ual Universal 3-Way ual Universal 3-Way ual Universal 3-Way * Type of switching: Universal 3-way: valve can be connected either as NP or NNP as required by connecting the primary air supply to port 1 or port 3. Push uttons Selector Switches Valve odies & ccessories Visual Indicators Foot Pedal Operated Switches Two and PX31112 Number olor PX41312 Function Type of Switching* PX31112 lack Spring Return NNP PX3111T4 Red Push-Pul PX3121T4 Red Push-Pull NP PX41312 lack Spring Return PX4131T4 Red Push-Pull Single Universal 3-Way * Type of switching: Universal 3-way: valve can be connected either as NP or NNP as required by connecting the primary air supply to port 1 or port 3. Note: Mount up to three valves on mounting ring. O ITEMS RE MOST POPUR. Pneumatic ivision 3 Richland, Michigan

8 Numbers ontrol Panel Products Push uttons For Use With PX Valve odies and ZE Electrical Switch odies Push uttons Mushroom ead Push uttons asic Features Push uttons Selector Switches Valve odies & ccessories Visual Indicators Foot Pedal Operated Switches Two and Z44 Plastic ead Z5** Number 1.13 (29).50 (13) ead Z4* Number Z42 Z52 Z42 lack Z53 Z43 Green Z54 Z44 Red Z45 Yellow Z46 lue Z52 Z42 lack Z53 Z43 Green Z54 Z44 Red Z45 Yellow Z4P2 lack Z4P3 Green Z4P4 Red 1.13 (29).38 (10) olor Function escription Spring Return Spring Return Spring Return * Z4*** Model Numbers are ead Operators ** Z5*** Model Numbers are Plasticl ead Operators Z4P2 Flush Extended ooted 1.13 (29).63 (16) Flush Extended ooted Spring Return Z (32) 1.50 (38) 1.38 (35) Z4R (60) Push / Pull Number* olor Function escription Z42 lack Z43 Green Spring Return Z44 Red Z4T2 lack Ø 40mm ead Z4T3 Green atching Push-Pull Z4T4 Red Z4R2 lack Z4R3 Green Spring Return Ø 60mm ead Z4R4 Red * Z4*** Model Numbers are ead Operators Mounting ccessories Push / Push uttons Z5Z905 Z402 olor Function escription Number* Z402 lack etent Z403 Green Flush 2-Position Z404 Red * Z4**** Model Numbers are ead Operators Number olor Z5Z905 ZZ1602 lack Plastic O ITEMS RE MOST POPUR. escription Plastic ead (Z5) Mounting Nut Tightening Tool Guard for 40mm Pneumatic ivision 4 Richland, Michigan

9 Numbers ontrol Panel Products Selector Switches For Use With PX Variable omposition Switch odies Selector Switches Key Operated Selectors asic Features 1.06 (27) Z43 Z4J (29) Standard Selector 1.06 (27) Knob ever.94 (24) 1.50 (38) 1.19 (30) 1.13 (29).88 (22) Z4G2 Push uttons Selector Switches Standard lack andle Number* escription Z42 Maintained Z44 Spring Return from Right to eft Z43 Maintained Z45 Spring Return to enter from eft and Right Z47 Maintained Right Spring Return from eft to enter Z48 Maintained eft Spring Return from Right to enter ong lack andle Z4J2 Maintained Z4J4 Spring Return from Right to eft Z4J3 Maintained Z4J5 Spring Return to enter from eft and Right Function 2-Positions 3-Positions 3-Positions 3-Positions 2-Positions 3-Positions Key Operated Number* Key Withdrawal Function Z4G2 eft 2 Maintained Z4G4 eft and Right Positions Z4G3 enter 3 Maintained Z4G5 eft and Right Positions Z4G7 enter 3-Positions 2 Spring Return to enter * Z4*** Model Numbers are ead Operators Mushroom ead Push uttons with Key Select Valve odies & ccessories Visual Indicators Foot Pedal Operated Switches Two and * Z4*** Model Numbers are ead Operators 2.38 (60) 1.38 (35) Z4S24 Number* Z4S54 olor Function escription Pneumatic ivision 5 Richland, Michigan Red atching Turn to Release Z4S14 Red Key atching Z4S64 Red atching Turn to Release Z4S24 Red Key atching * Z4**** Model Numbers are ead Operators O ITEMS RE MOST POPUR. Ø 40mm ead Ø 60mm ead

10 Numbers ontrol Panel Products Valve odies & ccessories asic Features Push uttons Selector Switches Valve odies & ccessories Visual Indicators For Use With 22mm (7/8") Operating eads 5/32" Instant onnections 3/2 Valve odies with Mounting Ring PX3111 Number onnections dditional Valve odies Function PX4131 Type of Switching* PX3111 5/32" Instant 3/2 NNP PX3121 5/32" Instant 3/2 NP PX4131 5/32" Instant 3/2 Universal 3-Way Note: Mount up to 3 valves on mounting ring for push buttons. Mount up to 2 valves on mounting ring for selector switches, cannot be mounted in center position. Specifications ir Quality Standard Shop ir, ubricated or ry...40 µm Filtration PX3... v=.08 PX4... v=.18 Materials ody... Polyamide Operating ead... Zinc lloy & Plastic Operating Positions... ll Positions Operating Pressure PX to 115 PSIG (1 to 9 bar) PX to 145 PSIG (1 to 10 bar) Ports...5/32" Instant for Semi-Rigid Nylon or... Polyurethane Tube Temperature Operating...5 F to 140 F (-15 to + 60 ) Foot Pedal Operated Switches Two and PX3911 PX4932 PX4931 Number PX3911 PX3912 PX3921 PX3922 PX4931 PX4932 onnections 5/32" Instant Straight 5/32" Instant Swivel 5/32" Instant Straigh 5/32" Instant Swivel 5/32" Instant Straight 5/32" Instant Swivel Function Type of Switching* 3/2 NNP 3/2 NP 3/2 Universal 3-Way O ITEMS RE MOST POPUR. Pneumatic ivision 6 Richland, Michigan

11 Technical Information ontrol Panel Products imensions & ssembly imensions & ssembly PX-3 imensions 1.83 (46.5) 2.01 (51) asic Features 1.95 (49.5).04 to.24 (1 to 6) ø.89 (22.5) 2.34 (59.5).04 to.24 (1 to 6) Push uttons PX-4 imensions 1.58 (40) Minimum istance etween enters Selector Switches ssembly 2.58 (65.5) 1.82 (46.2).04 to.24 (1 to 6) 1.18 (30) Tube ending Radius For PX3 and PX4 4 mm O.. x 2 mm I.. Tube = Minimum 0.39 (10) Radius 4 mm O.. x 2.7 mm I.. Tube = Minimum 0.59 (15) Radius 2.20 (56) 2.95 (75).04 to.24 (1 to 6) Valve odies & ccessories Visual Indicators Foot Pedal Operated Switches ssembling PX On Mounting lock 1 Top IK Two and 4 1 ssembling PX On the ack of the Electrical ontact 2 IK Pneumatic ivision 7 Richland, Michigan

12 Numbers ontrol Panel Products egend Plates, Specifications For Push uttons and Visual Indicators egend Plates for PX evices (22mm) For 22mm Visual Indicators Only asic Features Push uttons Selector Switches Valve odies & ccessories Visual Indicators Foot Pedal Operated Switches Two and ZY Number escription Without Text For ustomer Engraving ZY2101 lack / Red ackground (White etters) ZY4101 Yellow / White ackground (lack etters) With Text For Push uttons ZY2303 Start ZY2304 Stop ZY2305 Forward ZY2306 Reverse ZY2307 Up ZY2308 own ZY2309 Right ZY2310 eft ZY2311 On ZY2312 Off ZY2313 Open ZY2314 lose ZY2321 Inch ZY2323 Reset ZY2326 Power On ZY2327 Slow ZY2328 Fast ZY2330 Emergency Stop ZY2334 Run With Text For 2-Position Selectors ZY2367 Off On With Text For 3-Position Selectors ZY2387 and Off uto lank egend Plates for Inscription For PX evices (2 lines of 11 characters maximum) Please indicate the required text when ordering. (llow 3 weeks for delivery) Number escription ZY2002 lack ackground / White etters 2 lines of 11 characters maximum Please indicate the required text when ordering. (llow 3 weeks for delivery) Number escription Z2Y2002 lack ackground / White etters ccessories Electrical Switch odies When combined with pneumatic valves,these contact blocks allow different forms of power to be provided from a single push button. an be mounted with both types of valves PX3 / PX4. Electrical Specification: 240V, 10mp Number Type of ontact ZE101 Normally Open (NO) ZE102 Normally losed (N) Note: Plastic Mounting Ring Z5Z009 to be used with Z5 Plastic Operating eads. Mounting Ring Z4Z009 to be used with Z4 Operating eads. : Z4Z009 ZE101 O ITEMS RE MOST POPUR. Plastic: Z5Z009 Mounting Ring for Valve odies, Switch odies and Operating eads To make up a complete push button with one to three switching elements with 5/32" instant connections, use this mounting block and select the operating heads and bodies in this Section. Number escription Z4Z009 Mounting Ring Z5Z009 Plastic Mounting Ring To make up a complete selector switch with one or two switching elements with 5/32" instant connections, use this mounting block and select the operating heads and bodies in this Section. Number escription Z4Z009 Mounting Ring Z5Z009 Plastic Mounting Ring Note: To release push button from mounting ring, pull lever on top of mounting ring up and remove push button operator. To assemble push button operator to mounting ring, align arrows and snap into place. Pneumatic ivision 8 Richland, Michigan

13 Technical Information ontrol Panel Products Mounting Functionality Explanation Fluid Power Electrical Universal escription Function Symbol Function Symbol Normally losed (N..) 2-Way 3-Way Normally Non-Passing (NNP) Normally Open (N.O.) asic Features Normally Open (N.O.) 2-Way 3-Way Type of Switching: Universal 3-Way: Valve can be connected either as NP or NNP as required by connecting the primary air supply to port 1 or port 3. NP NNP NNP: Normally Non-Passing. NP: Normally Passing. NNP + NNP: ouble Switch ody, oth Normally Non-Passing. NNP + NP: Normally Non passing and Normally-Passing. NP + NP: oth Normally Passing. ombination of Output evices on a Single Mounting lock Up to 3 output devices (valves or electrical contacts) can be mounted side by side on 1 mounting block. Note: The central position can only be activated by push button heads. Normally Passing (NP) Normally losed (N..) ssembling Output evices and eads on Z5 Series Mounting lock Push uttons Selector Switches Valve odies & ccessories Visual Indicators Foot Pedal Operated Switches Two and Electrical ontacts and can be ombined Either Side by Side, or by Mounting the Valve on the ack of the Electrical ontact. Replacement Old Style Mounting Side by Side ombination ombination by Mounting On the ack of the Electrical ontact Pneumatic ivision 9 Richland, Michigan

14 asic Features Push uttons Selector Switches Valve odies & ccessories Pneumatic Products irline ccessories Numbers With 5/32" Instant onnections 22mm Visual Indicators PXVF131 ontrol Panel Products Visual Indicators, 22mm (7/8") Specifications ir Quality Standard Shop ir, ubricated or ry, 40µm Filtration Materials ody...polyamide Operating ead...zinc lloy & Plastic Number of Operations with ry ir at 90 PSI (6 bar) and 68 F (20 ) - Frequency 1 z...1 million Operations Mushroom ead...300,000 Operations Operating Positions...ll Positions Operating Pressure to 115 PSIG (1 to 8 bar) Ports Standard: 5/32" Instant for Semi- Rigid Nylon or Polyurethane Tube UNF vailable. Temperature Operating F to 122 F (0 to + 50 ) Storage F to 140 F (-30 to +60 ) Visual Indicators Mounting Foot Pedal Operated Switches Two and lack Plastic ezel Number Number ON Indicator OFF Indicator olor PXVF131 PXVF1213 Green PXVF141 PXVF1214 Red PXVF151 PXVF1215 Yellow PXVF161 PXVF1216 lue PXVF111 PXVF1211 White Notes: The Pneumatic Indicators are black in one position and colored in the other. The colored position corresponds either to the presence of a pressure ( ON Indicator) or the absence of pressure ( OFF Indicator). For egend Plates, see page F9. imensions PXVF1.06 to.25 (1.5 to 6) ø.89 (22.5) 1.10 (28) 1.58 (40) Minimum distance between centers 2.09 (53).63 (16) 1.18 (30) Pneumatic ivision 10 Richland, Michigan

15 Module and Pre-ssembled Enclosure ontrol Panel Products Two-and Pre-ssembled Two-and ontrol Enclosure Features The pre-assembled two-hand control enclosure occupies both hands of an operator by requiring nearly simultaneous operation of two pushbuttons Poppet snap-acting (no spools) Same air as in cylinders Filtration: 40 micron No lubrication required Number PXP111 Operation P PXP111 onnections 5/32 Instant S General haracteristics Operating Pressure...40 to 120 PSI (3 to 8 bar) Permissible Fluids ir or neutral gas 40 micron filtration, lubricated or dry at 90 PSI (6 bar)... 7 SFM (200 l/mn NR) Operating Temperature F to 140 F (-15 to 60 ) elow 40 F (5 ), an air dryer is required Storage Temperature F to 160 F (-40 to 70 ) Number of operations with dry air at 90 PSI (6 bar), 68 F (20 ), frequency 1 z...1 Million Operations Vibration resistance onforms to section 19-2 of bureau Véritas regulations... (November 1987) Materials ody... Glass Filled Nylon Operating ead... Zinc lloy and Plastic onnections:... 5/32" instant Mounting pprovals: In accordance with European Standard EN September 1996 onforms to the model that has obtained E Type Test ertificate ! WRNING These devices should NOT be used in any application involving rotary clutch presses. Two hand control modules do not of themselves insure the safety of any machine. Users and original equipment manufacturers are responsible for making sure that installations meet all relevant safety regulations. asic Features Push uttons Selector Switches Valve odies & ccessories Visual Indicators Foot Pedal Operated Switches Two and Output S will appear only if and are simultaneously operated (within.5 seconds or less of each other). If the operator actuates only one pushbutton, either or, or if both and are actuated but at an interval greater than.5 seconds, output S will not appear. Output S is regenerated by supply P. Output S will therefore disappear if supply P is cut off. Output S will disappear if either or is released. If output S disappears for any reason, and must be nearly simultaneously actuated to again provide output S. Since output S is regenerated it appears sharply, at full force (snap-acting), and is quickly exhausted upon deactivation. In addition the module is not affected by the length or diameter of tubing used for output S. imensions Inches 2.76 (70.0) 8.84 (224,6) 8.78 (223) (339,7) 7.09 (180.0).25 ia. 2 Places Ø (6,35) 1.63 (40,1).59 (15,1) 5/32" (4mm) Instant Push-in Fitting (x2).50 (12,7).25 (6,4) 3.28 (83,3) 1.13 (28,5) 3.41 (86,5) Pneumatic ivision 11 Richland, Michigan

16 asic Features Push uttons Selector Switches Valve odies & ccessories Visual Indicators Foot Pedal Operated Switches Two and Pneumatic Products irline ccessories Module and Pre-ssembled Enclosure a b ontrol Module & Repair s Two-and ontrol Module P S Number PXP11 imensions = PXP11 2x ø.16 (4.2) 2.56 (65) 3.03 (77) PXP11 = = = 1.58 (40) onnections 5/32" Instant 2.36 (60) ontrol Panel Products Two-and Specifications ir Quality Standard Shop ir, ubricated or ry, 40µm Filtration at 90 PSI (6 bar) in SFM (l/mn NR)... 7 (200) Materials ody... Polyamide Operating ead... Zinc lloy & Plastic Nominal ore Ø in Inches...7/64" (2.5) Number of Operations with ry ir at 90 PSI (6 bar) and 68 F (20 ) - Frequency 1 z...1 million Operations Operating Positions... ll Positions Operating Pressure to 115 PSIG (3 to 8 bar) Ports 5/32" Instant for Semi-Rigid Nylon or Polyurethane Tube Temperature Operating...32 F to 122 F (0 to + 50 ) Storage F to 140 F (-30 to + 60 ) Vibration resistance: onforms to section 19-2 of bureau Véritas regulations (November 1987)! WRNING These devices should NOT be used in any application involving rotary clutch presses. Two hand control modules do not of themselves insure the safety of any machine. Users and original equipment manufacturers are responsible for making sure that installations meet all relevant safety regulations. Notes: These two-hand control modules provide an output signal upon nearly concurrent operation of two pushbuttons. Two-and ontrol Module Guard Two and Repair s Number Quantity Required escription PXP11 1 ontrol Module PX Valve ody & Mounting Ring Z4R* 2 Push utton PPR15 2 ontrol Module Guard * 2 = lack, 3 = Green, 4 = Red Number PPR15 PPR15 ase omponent PXP111 Pneumatic ivision 12 Richland, Michigan

17 V & EZ Series ockout, 3-Way, 3-Port, 2-Position Section EZ Series V Series V Series asic Features...2 pplications...2 Mounting...2 imensions...2 V Series Technical Information Operation...3 Specifications...3 Ordering Information...3 old text part numbers are standard. Standard text part numbers may have longer lead times. EZ Series asic Features...4 pplications...4 Mounting...4 imensions...4 EZ Series Technical Information Operation...5 Specifications...5 Ordering Information...5 & Safety Standards...6 Pneumatic ivision 1 Richland, Michigan

18 asic Features V Series pplications & imensions V Series Features V Series EZ Series Used in systems for compliance with OS Standard 29 FR /8 inch to 1-1/4 inch Pipe s v s from 6.0 to 14 3/4 and 1-1/4 inch Exhaust Ports available Rugged ast luminum lloy ody Inline or Surface Mountable Safety Yellow and Red for igh Visibility etented Spool Exhaust Port ed for Installation of Silencer or ine for Remote Exhausting pplications ockout valves are installed in pneumatic drop legs, or individual pneumatic control lines (see Figure 1). In accordance with OS procedures, lockout valves are used during maintenance and service procedures of pneumatically (air) operated equipment. Prior to servicing, the red handle is pressed inward, blocking pressure and relieving all downstream air pressure. padlock is installed through the locking hasp, Preventing accidental actuation during the maintenance procedure. Following maintenance, the padlock is removed and the red handle is pulled outward, returning air pressure to the system. (For complete ockout / Tagout procedures, consult OS Standard 29 FR 1910 in U.S. Federal Register/Vol , Friday, September 1, 1989 / Page ) Mounting can be inline mounted or surface mounted using the two 11/32" mounting holes provided in the valve body. Mount valves in plain view with the handle oriented for accessibility. imensions 1 2 G 3 F E 1.34 ia. Thru 2 Places V Series, 3/4" Exhaust Port Inches 8.32 (211) E 4.24 (108) (16) F 1.32 (111) 1-1/4" Exhaust Shown 6.60 (168) G 1.56 (40) 2.00 (51) 2.21 (56) V Series, 1-1/4" Exhaust Port Inches 3.06 (78) 9.91 (252) E 5.65 (144) (22) F 1.74 (44) 7.95 (202) G 1.89 (48) 2.25 (57) 2.74 (70) 3.91 (99) Pneumatic ivision 2 Richland, Michigan

19 Technical Information Operation Normal Machine Operation Valve Open With the handle pulled outward. Inlet Port 1 is open to outlet Port 2. Exhaust Port 3 is blocked. V Series Operation, Specifications & Ordering ockout Operation Valve losed With the handle pushed inward. Inlet Port 1 is blocked. Outlet Port 2 is open to Exhaust Port 3. EZ Series V Series Open losed Specifications Operating Pressure Range: 15 to 300 PSIG (103 to 2068 kpa) Operating Temperature Range (mbient): 40 F to 175 F (4 to 80 ) ubrication: For best results and service life, use clean, moisture free, lubricated air. Recommended ubricant: F442 Oil Materials of onstruction ody... ast luminum lloy andle...3/8" - 1-1/4" Exhaust Port - Plastic Spool... luminum Seals...arboxylated Nitrile etent Spring... Stainless Steel Grease... Magnalube G Trademark Magnalube V Series Model Number Index asic Port Port esign Series Type evel V 6 N Port (Inlet & Outlet Ports 1 & 2) 3 3/8" * 4 1/2" * 6 3/4" * 8 1" 1-1/4" Type (Ports 1, 2 & 3) N NPT SPP (G) Port (Exhaust Port 3) 6 3/4" 1-1/4" esign evel urrent * vailable with 3/4" Exhaust Port. vailable with 1-1/4" Exhaust Port. Pneumatic ivision 3 Richland, Michigan

20 asic Features EZ Series pplications & imensions EZ Series Features V Series EZ Series ombines ockout and Soft-Start Functions in a Single Unit Used in systems for compliance with OS Standard 29 FR /8 inch to 1-1/4 inch Pipe s v s from 3.7 to /4 and 1-1/4 inch: Exhaust Ports available Rugged ast luminum lloy ody Exhaust Port ed for Installation of Silencer or ine for Remote Exhausting Inline or Surface Mountable pplications EZ valves are installed in pneumatic drop legs, or individual pneumatic control lines (see Figure 1). In accordance with OS procedures, EZ valves are used during maintenance and service procedures of pneumatically (air) operated equipment. Prior to servicing, the blue handle is pressed inward, blocking pressure and relieving all downstream air pressure. padlock is installed through the locking hasp, preventing accidental actuation during the maintenance procedure. Following maintenance, the padlock is removed and the blue handle is pulled outward, gradually returning air pressure to the system. (For complete ockout / Tagout procedures, consult OS Standard 29 FR 1910 in U.S. Federal Register/Vol , Friday, September 1, 1989 / Page ) Mounting can be inline mounted or surface mounted using the two 11/32" mounting holes provided in the valve body. Mount valves in plain view with the handle oriented for accessibility. imensions 1 3/4" Exhaust Shown EZ Series, 3/4" Exhaust Port Inches 8.32 (211) E 4.24 (108) 2 G 3 F E (16) F 1.32 (111) 6.60 (168) G 1.56 (40) 2.00 (51) 2.21 (56) EZ Series, 1-1/4" Exhaust Port Inches 1.34 ia. Thru 2 Places 3.06 (78) 9.91 (252) E 5.65 (144) (22) F 1.74 (44) 7.95 (202) G 1.89 (48) 2.25 (57) 2.74 (70) 3.91 (99) Pneumatic ivision 4 Richland, Michigan

21 Technical Information Operation Normal Machine Operation Valve Open When the blue handle is pulled outward, the adjustable needle valve (accessed through the top of the handle) setting determines the rate of pressure buildup. When downstream pressure reaches the full flow described in the specifications below, Inlet Port 1 is open to outlet Port 2. Exhaust Port 3 is blocked. EZ Series Operation, Specifications & Ordering ockout Operation Valve losed When the blue handle is pushed inward, the Inlet Port 1 is blocked. ownstream air is exhausted through Exhaust Port 3. V Series EZ Series Open Pressure uilding Up Open Full losed Specifications Operating Pressure Range: 30 to 150 PSIG (2 to 10 bar) Open to Full : Inlet Pressure - 25 PSIG (1.7 bar) Operating Temperature Range (mbient): 40 F to 175 F (4 to 80 ) ubrication: For best results and service life, use clean, moisture free, lubricated air. Recommended ubricant: F442 Oil Materials of onstruction ody... ast luminum lloy andle...plastic Spool... luminum Seals...arboxylated Nitrile etent Spring... Stainless Steel Grease... Magnalube G EZ ombination EEZ-On Series Model Number Index asic Port esign Port Series Type evel EZ 03 N Notes: * vailable with 3/4" Exhaust Port. vailable with 1-1/4" Exhaust Port. Trademark Magnalube Port (Inlet & Outlet Ports 1 & 2) 03 3/8" * 04 1/2" * 06 3/4" * 08 1" 0 1-1/4" Type (Ports 1, 2 & 3) N NPT SPP (G) R SPT (R) esign evel urrent Port (Exhaust Port 3) 6 3/4" 1-1/4" Pneumatic ivision 5 Richland, Michigan

22 Technical Information V & EZ Series & Safety Standards V Series EZ Series Technical Information Model 1 to 2 v 2 to 3 v V3N V4N V6N V6N V8N VN Model 1 to 2 v 2 to 3 v EZ03N EZ04N EZ06N EZ08N EZ0N Schematic 12 FR Main ir Pressure To Requirement To Requirement Figure 1 ockout Shown In The Passing ondition 10 Friday, September 1, 1989 the Occupational Safety and ealth dministration (OS) passed a standard, 29FR 1910, requiring certain lockout and / or tagout procedures for the control of a hazardous energy source. This standard addresses practices and procedures that are necessary to disable the release of potentially hazardous energy while maintenance and servicing activities are being performed. Tagout refers to the use of tags to warn workers when equipment using potentially hazardous energy is being serviced. ockout is the procedure which ensures that all power to a piece of equipment is isolated, locked or blocked and dissipated using a method that cannot be readily removed to bypassed. issipation means stored energy at the equipment is brought to a neutral state. This standard is expected to save 120 lives and prevent 60,000 accidents a year. This OS Standard became effective October 31, typical application (Figure 1) shows a main lockout valve mounted in the main drop leg, before the split to machine functions. dditional lockout valves can be used to isolate individual control lines. efore servicing, the valve can be actuated and locked to isolate downstream from pressure, and exhaust downstream to atmosphere thus making equipment safe for maintenance. To reference this standard see the U.S. Federal Register / Vol. 54, 169 / Friday, September 1, 1989 / Page For copies of this standard, contact U.S. epartment of abor, Occupational Safety and ealth dministration, Office of Publication, Room N3101, Washington, 20210, (202) Pneumatic ivision 6 Richland, Michigan

23 Integrated Fittings Section Threshold Sensors locking heck In-ine Plug-In Swivel Miniature ompact Product Index Product Index ompact ontrol Miniature ontrol Swivel Outlet ontrol Plug-in ontrol In-line ontrol ompact ontrol heck locking Threshold Sensor Pneumatic ivision 1 Richland, Michigan

24 Product Index Integrated Fittings Fittings ompact ontrol F731 Meter Out F731 Meter Out - SPP F731 i-irectional ontrol F731 i-directional ontrol - SPP FK731 Knobless Meter Out ontrol Page 4 Page 4 Page 5 Page 5 Page 5 FK731 Knobless ontrol - SPP FK731 Knobless i-directional ontrol - SPP Miniature ontrol FM731 Meter Out ontrol FM731 ontrol - SPP FM731 i-directional ontrol - SPP Product Index ompact Miniature Page 5 FMK731 Knobless Mini Meter Out ontrol Swivel Outlet ontrol Page 5 FS731 ompact Swivel Outlet ontrol Page 7 FMS731 Mini Swivel Outlet ontrol FMS731 Miniature Swivel Outlet - SPP Page 7 FS731 ompact Swivel Outlet - SPP Page 7 Swivel Plug-In In-ine Plug-In ontrol Page 7 FMSP731 Mini ontrol FMSP701 Miniature ontrol Page 9 FSP731 ompact ontrol Page 9 In-ine ontrol Page 9 F832 ontrol Page 9 heck F832 i-directional ontrol F832 ontrol Page 11 Page 11 F832 i-directional ontrol FPM832 Panel Mountable ontrol Page 11 F836 ed ontrol F836 ed ontrol - SPP Page 13 locking Threshold Sensors 337 Series Micrometer ontrol Page 13 Page Series Micrometer ontrol - SPP Page Series i-directional ontrol Page Series i-directional ontrol - SPP Page Series ontrol Page Series ontrol - SPP Page 14 Page 14 Page 14 Page 14 Page 15 Page Series ontrol 3250 Series ontrol - SPP ompact ontrol 3251 Series Right ngle ontrol F705 Push-to-onnect ontrol F701 Push-to-onnect ontrol - SPP Page 15 Page 15 Page 17 Page 17 Page 17 F708 ed Port Meter Out ontrol F702 ed Port ontrol - SPP ontrol heck 32PK In-ine heck Valve 32PK In-ine heck Valve W68PK Male heck Valve Page 17 Page 17 Page 19 Page 19 Page 19 Pneumatic ivision 2 Richland, Michigan

25 Product Index Integrated Fittings Fittings W68PKI Male heck Valve Meter In 68PK Male heck Valve Meter Out - SPP 68PKI Male heck Valve Meter In - SPP V heck Valve 339 Series heck Valve 339 Series heck Valve - SPP Page 19 Page 19 Page 19 Page 19 Page 20 Page Series heck Valve locking ontrol F601 Push-to-onnect ock Out F601 Push-to-onnect ock-out Valve - SPP F602 ed Port ock Out F608 ed Port ock-out Valve - SPP Page 20 Page 23 Page 23 Page 23 Page 23 Product Index Threshold Sensor PSJ731 Pneumatic - 5/32 Pilot PSJ731 Pneumatic - 4mm Pilot PSPJ731 Pneumatic Pilot PSJ708 Pneumatic - M5 Pilot PSPE701 Pneumatic / Electric - SPP ompact Miniature Page 25 Page 25 Page 25 Page 25 Page 25 Swivel Threshold Sensors locking heck In-ine Plug-In Pneumatic ivision 3 Richland, Michigan

26 Product Index ompact Miniature Swivel Plug-In In-ine heck locking Threshold Sensors Pneumatic Products irline ccessories Features Materials Of onstruction ody (epending upon the Model): Gripping Ring: djustment Screws ocking Nut: ase: pplicable Tube Glass reinforced nylon 6.6 rass Stainless Steel Nickel-plated brass Nickel-plated brass Nickel-plated brass Nomenclature Example:F ttribute: F control ompact 7 Right angle 3 Nylon body 1 Tube x Pipe 4 1/4 Tube O.. 2 1/8 Pipe thread Tube O.. 1/8, 5/32, 1/4, 3/8 Tube O.. 4, 6, 8, 10, 12 Specifications Pressure Range: 15 to 145 PSI Temperature Ranges: 30 to 160 F Working Fluid: ompressed air Integrated Fittings ompact ontrol ompact flow control regulators ensure excellent performance of flow and are perfectly suited for reduced spaces due to their small size. The sensitivity of the adjustment screw provides very precise air flow control and regulation. locking nut guarantees stability of adjustment against vibration tampering of the flow setting. ex 1 Ø F731 ompact Meter Out Tube (In) NPT ex 1 (In) ex 2 (In) Open losed F731-5/32-2 5/32 1/ F731-5/32-4 5/32 1/ F /4 1/ F /4 1/ F /8 1/ F /8 3/ Ø ex 1 ex 2 F731 ompact Meter Out - SPP Tube SPT ex 1 ex 2 losed Open ex 2 F731-4M-2G 4 1/ F731-6M-2G 6 1/ F731-6M-4G 6 1/ F731-8M-2G 8 1/ F731-8M-4G 8 1/ F731-8M-6G 8 3/ F731-10M-4G 10 1/ F731-10M-6G 10 3/ F731-12M-6G 12 3/ F731-12M-8G 12 1/ Pneumatic ivision 4 Richland, Michigan

27 Numbers Integrated Fittings ompact ontrol ex 1 ex 1 Ø F731 ompact i-irectional ontrol Tube (In) NPT ex 1 (In) ex 2 (In) Open losed F731-5/32-2 5/32 1/ F /4 1/ F /4 1/ F731 ompact i-directional ontrol - SPP Tube SPP ex 1 ex 2 ex 1 losed Open F731-4M-2G 4 1/ F731-6M-2G 6 1/ F731-6M-4G 6 1/ F731-8M-2G 8 1/ F731-8M-4G 8 1/ F731-8M-6G 8 3/ ex 2 ex 2 FK731 Knobless ompact ontrol - SPP Tube SPP / M5 ex 1 FK731-4M-M5 4 M5x FK731-4M-2G 4 1/ FK731-6M-M5 6 M5x FK731-6M-2G 6 1/ FK731-6M-4G 6 1/ FK731-8M-2G 8 1/ FK731-8M-4G 8 1/ FK731-8M-6G 8 3/ FK731-10M-4G 10 1/ FK731-10M-6G 10 3/ FK731-10M-8G 10 1/ FK731-12M-6G 12 3/ FK731-12M-8G 12 1/ ex 1 Product Index ompact Miniature Swivel Plug-In In-ine heck locking FK731 Knobless Meter Out ontrol Tube (In) NPT / UNF ex 1 FK / FK /8 1/ FK731-5/32-0 5/ FK731-5/32-2 5/32 1/ FK / FK /4 1/ FK /4 1/ FK /16 1/ FK /16 1/ FK /8 1/ FK /8 3/ ex 1 FK731 Knobless i-directional ontrol - SPP Tube SPP / M5 ex 1 FK731-4M-M5 4 M5x FK731-4M-2G 4 1/ FK731-6M-M5 6 M5x FK731-6M-2G 6 1/ FK731-6M-4G 6 1/ FK731-8M-2G 8 1/ FK731-8M-4G 8 1/ FK731-8M-6G 8 3/ Threshold Sensors Pneumatic ivision 5 Richland, Michigan

28 Product Index ompact Miniature Swivel Plug-In In-ine Pneumatic Products irline ccessories Features F M Materials of onstruction ody (epending upon the Model): Gripping Ring: djustment Screws ocking Nut: ase: Example: FM Nomenclature Glass reinforced nylon 6.6 rass pplicable Tube Tube O.. 1/8, 5/32, 1/4 Tube O.. 3, 4, 6, 8 Stainless Steel Nickel-plated brass Nickel-plated brass Nickel-plated brass ttribute: control Miniature 7 Right angle 3 Nylon body 1 Tube x pipe 4 1/4 Tube O.. 2 1/8 Pipe thread Integrated Fittings Miniature ontrol The miniature flow control regulator is especially adapted for all very small sized pneumatic applications (micro-pneumatic in particular). They are specifically designed for use with small bore cylinders (pancake / flat cylinders). Miniature flow control regulators are available in meter out, meter in and bi-directional versions. heck locking Threshold Sensors Pressure Range: Temperature Ranges: Working Fluid: Specifications 15 to 145 PSI 30 to 160 F ompressed air Pneumatic ivision 6 Richland, Michigan

29 Numbers Integrated Fittings Miniature ontrol ex 1 ex 1 FM731 Miniature Meter Out ontrol Tube (In) NPT ex 1 mm Open losed FM / FM /8 1/ FM731-5/32-0 5/ FM731-5/32-2 5/32 1/ FM / FM /4 1/ FM /4 1/ ex 1 FMK731 Knobless Mini Meter Out ontrol Tube (In) NPT ex 1 mm Open losed FMK / FMK /8 1/ FMK731-5/32-0 5/ FMK731-5/32-2 5/32 1/ FMK / FMK /4 1/ FMK /4 1/ Product Index ompact Miniature Swivel FM731 Miniature ontrol - SPP Tube SPP ex 1 losed Open FM731-3M-M3 3 M3x FM731-3M-M5 3 M5x FM731-4M-M3 4 M3x FM731-4M-M5 4 M5x FM731-4M-2G 4 1/ FM731-6M-M5 6 M5x FM731-6M-2G 6 1/ FM731-6M-4G 6 1/ FM731-8M-2G 8 1/ FM731-8M-4G 8 1/ FM731-8M-6G 8 3/ Plug-In In-ine heck locking Threshold Sensors ex 1 FM731 Miniature i-directional ontrol - SPP Tube SPP ex 1 losed Open FM731-4M-M5 4 M5x FM731-4M-2G 4 1/ FM731-6M-M5 6 M5x FM731-6M-2G 6 1/ FM731-6M-4G 6 1/ Pneumatic ivision 7 Richland, Michigan

30 Features Integrated Fittings Swivel Outlet ontrol Product Index ompact Miniature Swivel Plug-In In-ine ody: Example: FMs731-5/32-2 F M s Materials of onstruction Gripping Ring: djustment Screws ocking Nut: ase: Nomenclature Glass reinforced nylon 6.6 Stainless Steel Nickel-plated brass Nickel-plated brass Nickel-plated brass pplicable Tube ttribute: control Miniature Swivel outlet 7 Right angle 3 Nylon body 1 Tube x pipe 5/32 5/32 Tube O.. 2 1/8 Pipe thread Tube O.. 5/32, 1/4, 3/8 Tube O.. 4, 6, 8, 10, 12 control regulators with swivel outlet are especially designed to allow a vertical or angled tube exit where access is restricted. The swivel outlet comes with instant push-in connection to ease installation. control regulators with swivel outlet are available in meter out and meter in versions. heck locking Threshold Sensors Pressure Range: Temperature Ranges: Working Fluid: Specifications 15 to 145 PSI 30 to 160 F ompressed air Pneumatic ivision 8 Richland, Michigan

31 Numbers Integrated Fittings Swivel Outlet ontrol ex 2 ex min/ max 1 1 ex 1 ex 1 FS731 ompact Swivel Outlet ontrol Tube (In) NPT ex 1 mm ex 2 mm losed Open 1 1 FS /4 1/ FS /4 1/ FS /8 1/ FS /8 3/ EX FS731 ompact Swivel Outlet - SPP Tube SPP ex 1 mm ex 2 mm losed Open 1 1 FS731-6M-2G 6 1/ FS731-6M-4G 6 1/ FS731-8M-2G 8 1/ FS731-8M-4G 8 1/ FS731-8M-6G 10 3/ FS731-10M-4G 10 1/ FS731-10M-6G 10 3/ FS731-12M-6G 12 3/ FS731-12M-8G 12 1/ Product Index ompact Miniature Swivel 1 Plug-In FMS731 Mini Swivel Outlet ontrol Tube (In) NPT ex 1 mm losed Open 1 1 FMS731-5/32-0 5/ FMS731-5/32-2 5/32 1/ In-ine heck locking Threshold Sensors ex FMS731 Miniature Swivel Outlet - SPP Tube SPP ex 1 mm losed Open 1 1 FMS731-4M-M5 4 M5x FMS731-4M-2G 4 1/ FMS731-6M-M5 6 M5x FMS731-6M-2G 6 1/ Pneumatic ivision 9 Richland, Michigan

32 Features Integrated Fittings Plug-In ontrol Product Index ompact Miniature Swivel Plug-In In-ine heck locking Threshold Sensors ody: Example: FMs731-5/32-2 F M Nomenclature pplicable Tube ttribute: control Miniature 7 Right angle 3 Nylon body 1 Tube x pipe 4 1/4 Tube O.. 2 1/8 Pipe thread Tube O.. 1/8, 5/32, 1/4 Tube O.. 4, 6, 8, 10, 12 Pressure Range: Temperature Ranges: Working Fluid: Materials of onstruction Gripping Ring: djustment Screws ocking Nut: Tailpiece: Specifications Glass reinforced nylon 6.6 Stainless Steel Nickel-plated brass Nickel-plated brass Nickel-plated brass 15 to 145 PSI 30 to 160 F ompressed air Plug-in flow control regulators can be directly mounted into existing fittings and allow very compact installations. They are particularly suited for mounting in manifolds using cartridges. Their design and function give equal performance to that of flow control regulators with threaded connections. Pneumatic ivision 10 Richland, Michigan

33 Numbers Integrated Fittings Plug-In ontrol ex Ø FMSP731 Plug-In Mini ontrol Tube (In) ex 1 mm Open losed 1 2 FMSP / FMSP731-5/32 5/ FMSP / Miniature Product Index ompact ex 1 Swivel Plug-In 1 2 Ø In-ine FMSP701 - Plug-In Miniature ontrol Tube ex 1 mm losed Open 1 2 FMSP701-4M FMSP701-6M heck locking Threshold Sensors ex FSP731 Plug-In ompact ontrol Tube ex 1 mm losed Open 1 2 FSP731-6M FSP731-8M FSP731-10M FSP731-12M Pneumatic ivision 11 Richland, Michigan

34 Features Integrated Fittings In-ine ontrol Product Index ompact Miniature Swivel Plug-In In-ine heck locking ody: Example: FMs731-5/32-2 F M Tube O.. Nomenclature pplicable Tube ttribute: control Miniature 8 In-line 3 Nylon body 2 Tube x pipe 4 1/4 Tube O.. 5/32, 1/4, 5/16, 3/8, 1/2 Tube O.. 4, 6, 8, 10, 12 Pressure Range: Temperature Ranges: Working Fluid: Materials of onstruction Gripping Ring: djustment Screws ocking Nut: Tailpiece: Specifications Glass reinforced nylon 6.6 Stainless Steel Nickel-plated brass Nickel-plated brass Nickel-plated brass 15 to 145 PSI 30 to 160 F ompressed air In-line flow controls are unidirectional flow control valves. Intake air flows freely through the flow control; exhaust air is metered out through a specially designed adjustment screw. n arrow on the body of the valve indicates the direction of controlled flow. They can be easily added to existing circuitry. Simply splice it into the cylinder port line. They can be used individually or they may be stacked together using two joining clips. Threshold Sensors Pneumatic ivision 12 Richland, Michigan

35 Numbers Integrated Fittings In-ine ontrol 1 1 ex 1 ex 1 N2 N2 K K K K K K F832 In-ine ontrol Tube (In) ex 1 mm losed Open K 1 N1 N2 T F832-5/32 5/ F / F / F / F / N1 ØT F832 In-ine i-directional ontrol - SPP Tube ex 1 mm losed Open K 1 N1 N2 T F832-4M F832-6M F832-8M N1 ØT ex 2 ex 1 K Product Index ompact Miniature Swivel N2 ex 1 T Plug-In K K K In-ine 1 F832 In-ine ontrol - SPP Tube ex 1 mm losed Open K 1 N1 N2 T F832-4M F832-6M F832-8M F832-10M F832-12M N1 ØT FPM832 In-ine Panel Mountable ontrol - SPP Tube ex 1 ex 2 losed Open K 1 2 T FPM832-4M FPM832-6M FPM832-8M FPM832-10M FPM832-12M heck locking Threshold Sensors K 1 N2 K K ex 1 min/max 1 N2 T ex 2 ØJ K N1 F832 In-ine i-directional ontrol Tube (In) ex 1 mm losed Open K 1 N1 N2 T F832-5/32 5/ F / F / N1 ØT F836 ed In-ine ontrol NPT ex 1 ex 2 losed Open ex 1 K 1 N1 N2 T F / F / F / F / Pneumatic ivision 13 Richland, Michigan

36 Product Index ompact Miniature Swivel Plug-In In-ine heck locking Threshold Sensors Pneumatic Products irline ccessories Numbers F836 ed In-ine ontrol - SPP 337 Micrometer ontrol SPP ex 1 Port ex 2 min/max losed Open I /8" 9/16" /4" 11/16" /8" 7/8" /2" 1-3/16" /4" 1-3/8" K N1 N2 T F836-2G 1/ F836-4G 1/ F836-6G 3/ F836-8G 1/ K ØJ 1 1 N2 ex OPEN 2 - OSE T ex 2 N1 Integrated Fittings In-ine ontrol 338 i-directional ontrol Port /8" 9/16" /4" 11/16" /8" 7/8" /2" 1-3/16" /4" 1-3/8" i-directional ontrol - SPP Port O-ring for friction 1 O-ring for friction G1100 1/8" 9/16" G1101 1/4" 11/16" I OPEN 2 - OSE I OPEN 2 - OSE I OPEN 2 - OSE 337 Micrometer ontrol - SPP Port G1000 1/8" 9/16" G1001 1/4" 11/16" Pneumatic ivision 14 Richland, Michigan

37 Numbers Integrated Fittings In-ine ontrol 3250 ontrol Port E F /8" /4" /8" /2" /4" E (losed) FU FOW F J FOW 3250 ontrol Port E F G " /4" /2" F dj (losed) Full G (ex) E Product Index ompact 3250 ontrol - SPP Port E F 3250G0119 1/8" G0219 1/4" G0319 3/8" G0419 1/2" G0519 3/4" E (losed) FU FOW F J FOW 3250 ontrol - SPP Port F dj (losed) E F G 3250G1000 1" G /4" G /2" Full G (ex) E Miniature Swivel Plug-In In-ine heck locking Threshold Sensors Pneumatic ivision 15 Richland, Michigan

38 Features Integrated Fittings ompact ontrol Materials of onstruction ody: Treated rass Gripping Ring: Stainless Steel djustment Screws Nickel-plated brass ocking Nut: Nickel-plated brass Tailpiece: Nickel-plated brass Product Index ompact Miniature Example: FMs731-5/32-2 F Nomenclature ttribute: control 7 Right angle 0 rass body 1 Tube x pipe 4 1/4 Tube O.. 2 1/8 Pipe thread Swivel Plug-In In-ine heck locking Threshold Sensors pplicable Tube Tube O.. 1/8, 5/32, 1/4, 3/8 Tube O.. 4, 6, 8, 10, 12, 14 Pressure Range: Temperature Ranges: Working Fluid: Specifications 15 to 145 PSI 30 to 160 F ompressed air flow control regulators are suited for use in severe conditions (temperatures, sparks, abrasion, etc). The screw and locking nut have been designed for easy manipulation, by hand. djustment can be made with a screwdriver and locking by use of a wrench. Pneumatic ivision 16 Richland, Michigan

39 Numbers Integrated Fittings ompact ontrol ex 1 Open Free ex 2 Shown with ed Inlet Shown with Prestolok Inlet Fitting 3251 ontrol Model Number (NPT) Male (NPT) Female mm mm 1 Metered mm Weight kg. ex 1 djusted v Free /8 1/ /4 1/ /8 3/ /2 1/ With Prestolok Fittings /8 5/ /8 1/ /4 1/ /4 3/ /8 3/ UTION: If it is possible that the ambient temperature may fall below freezing, the medium must be moisture-free to prevent internal damage or unpredictable behavior. F701 Push-to-onnect ontrol - SPP Tube SPP ex 1 ex 2 losed Open F701-4M-2G 4 1/ F701-6M-2G 6 1/ F701-6M-4G 6 1/ F701-8M-2G 8 1/ F701-8M-4G 8 1/ F701-8M-6G 8 3/ F701-10M-4G 10 1/ F701-10M-6G 10 3/ F701-12M-6G 12 3/ F701-12M-8G 12 1/ F701-14M-8G 14 1/ ex 1 NPT Product Index ompact Miniature Swivel Plug-In In-ine ex 2 heck F705 Push-to-onnect ontrol Tube (In) NPT ex 1 mm ex 2 mm losed Open F705-5/32-2 5/32 1/ ex 2 F708 ed Port Meter Out ontrol NPT ex 1 mm ex 2 mm losed Open 1 2 F / F / F / F / locking Threshold Sensors F /4 1/ F /4 1/ F /8 1/ F /8 3/ ex 1 NPT ex 2 F702 ed Port ontrol - SPP SPP ex 1 mm ex 2 mm losed Open F702-2G 1/ F702-4G 1/ F702-6G 3/ F702-8G 1/ Pneumatic ivision 17 Richland, Michigan

40 Features Integrated Fittings heck Materials of onstruction 32PK: Nylon/nickel plated brass 68PK: Nylon body ody: with nickel-plated brass base V: cetal Gripping Stainless Steel Ring: Nitrile (32PK & O-Ring: 68PK) EPM (V) Product Index ompact Miniature Swivel Plug-In In-ine heck locking Threshold Sensors Nomenclature Example: ttribute: W68PK-4-2 White thread W sealant 68 Tube x Pipe P Prestolok K heck Valve 4 1/4 Tube O.. 2 1/8 Pipe thread Nomenclature Example: ttribute: 4V4-MG cetal 4 1/4 Tube O.. V Valve, heck 4 1/4 Tube O.. MG gripping ring These in-line check valves allows air to pass in one direction while blocking flow in the other direction. Their extreme compactness and light weight make them suitable as a safety item in compressed air circuits. The body of the fitting contains an arrow to indicate the direction of flow. pplicable Tube PK: 5/32, 1/4, Tube O.. 5/16, 3/8 V: 1/4, 5/16, 3/8 Tube O.. PK: 4, 6, 8, 10, 12 Specifications Pressure Range: 15 to 145 PSI Temperature Ranges: 34 F to 150 F racking Pressure: PK: 7 PSI V: 1/3 PSI Working Fluid: ompressed air Pneumatic ivision 18 Richland, Michigan

41 Numbers Integrated Fittings heck ex 32PK In-ine heck Valve Tube (In) 32PK-5/32 5/ PK-4 1/ PK-5 5/ PK-6 3/ PK Male heck Valve Meter Out - SPP Tube SPP ex 1 68PK-4M-M5 4 M5x PK-4M-2G 4 1/ PK-6M-2G 6 1/ PK-6M-4G 6 1/ PK-8M-2G 8 1/ PK-8M-4G 8 1/ Product Index 32PK In-ine heck Valve Tube 32PK-4M PK-6M PK-8M PK-10M PK-12M PKI Male heck Valve Meter In - SPP Tube SPP ex 1 68PKI-4M-M5 4 M5x PKI-6M-2G 6 1/ ex ompact Miniature Swivel Plug-In In-ine 68PKI-8M-2G 8 1/ PKI-8M-4G 8 1/ ex 68PKI-10M-6G 10 3/ PKI-12M-6G 12 3/ heck W68PK Male heck Valve Tube (in) NPT / UNF ex 68PK-5/32-0 5/ W68PK-5/32-2 5/32 1/ PKI-12M-8G 12 1/ O.. locking Threshold Sensors W68PK-4-2 1/4 1/ W68PK-4-4 1/4 1/ W68PK-6-4 3/8 1/ W68PK-6-6 3/8 3/ V heck Valve Tube (In) l O.. 4V4-MG 1/ V5-MG 5/ V6-MG 3/ ex W68PKI Male heck Valve Meter In Tube (In) NPT / UNF ex 68PKI-5/32-0 5/ W68PKI-5/32-2 5/32 1/ W68PKI-4-2 1/4 1/ W68PKI-4-4 1/4 1/ W68PKI-6-4 3/8 1/ W68PKI-6-6 3/8 3/ Pneumatic ivision 19 Richland, Michigan

42 Numbers Integrated Fittings heck Product Index 339 heck Valve Port /8" /4" /8" /2" /4" ompact Miniature Swivel Plug-In In-ine 339 heck Valve - SPP Port 00339G3000 1/8" G3001 1/4" heck locking 13/16 ex 35/64 Flats Threshold Sensors 3047 heck Valve.22 (6) ia (65) Model Number Pipe /4" Pneumatic ivision 20 Richland, Michigan

43 Notes Integrated Fittings Threshold Sensors locking heck In-ine Plug-In Swivel Miniature ompact Product Index Pneumatic ivision 21 Richland, Michigan

44 Features Integrated Fittings locking ontrol Materials of onstruction ody: Treated rass Gripping Ring: Stainless Steel Seals, iaphragm: Nitrile Product Index ompact F Example: F Nomenclature ttribute: control 6 locking 0 rass body 1 Tube x pipe 4 1/4 Tube O.. 2 1/8 Pipe thread Miniature Swivel Plug-In In-ine heck locking Threshold Sensors pplicable Tube Tube O.. 1/8, 5/32, 1/4, 3/8 Tube O.. 4, 6, 8, 10, 12, 14 Pressure Range: Temperature Ranges: Number of ycles eak Rate: Working Fluid: Specifications 15 to 145 PSI -4 to 160 F > 10 million at 68 F and 1 z < 3.2 M ompressed air locking valves prevents damage to work and equipment in the event of a loss of pressure. locking valves which are mounted in pairs on a cylinder lock the piston by simultaneously cutting off the supply and exhaust. Functional locks are more precise and rapid when blocking valves are located on the cylinder: the volume of air in the pipework no longer needs to be taken into consideration. Pneumatic ivision 22 Richland, Michigan

45 Numbers Integrated Fittings locking ontrol F601 Push-to-onnect ock-out Tube (in) NPT ex 1 2 F /4 1/ F /4 1/ F /8 3/ F /2 1/ F602 ed Port ock-out 1 NPT 2 NPT ex 1 2 F /4 1/ F /4 1/ F /8 3/ F /2 1/ Product Index Miniature ompact M5 Swivel Plug-In F601 Push-to-onnect ock-out Valve - SPP Tube SPP ex F601-6M-2G 6 1/ F601-6M-4G 6 1/ F601-8M-4G 8 1/ F601-8M-6G 8 3/ F601-10M-6G 10 3/ F601-12M-8G 12 1/ F608 ed Port ock-out Valve - SPP SPP 1 SPP 2 ex F608-4G-2G 1/8 1/ F608-4G-4G 1/4 1/ F608-6G-6G 3/8 3/ F608-8G-8G 1/2 1/ In-ine heck locking Threshold Sensors Pneumatic ivision 23 Richland, Michigan

46 Features Integrated Fittings Threshold Sensor Specifications: Models PSJ, PSPJ Working Temperature: Working Pressure: reaking Pressure: Response Time: 5 to 140 F 45 to 115 PSI 8.5 PSI 3 Ms Product Index Specifications: Model PSPE Working Pressure: 45 to 115 PSI reaking Pressure: 7 PSI urrent Rating: 5 / 250V - 5W / 48V ompact Miniature Reset Pressure: U isted omponent 10 PSI Swivel Plug-In In-ine The sensor fitting detects the absence of pressure and translates it to a high pressure pneumatic output. When used to monitor the decaying or exhausting side of a pneumatic cylinder s piston, it emits a positive output. When the cylinder comes to the end of its stroke, wherever that may be, the signal emitted from the sensor can then be used to pilot the next step. heck locking Threshold Sensors Pneumatic ivision 24 Richland, Michigan

47 Numbers Integrated Fittings Threshold Sensor ex 1 ø M5 ex 1 10,5 PSJ731 Pneumatic Threshold Sensor - 5/32 Pilot NPT / UNF ex PSJ / PSJ /8 9/ PSJ /4 5/ PSJ /8 7/ PSJ / PSJ708 Pneumatic Threshold Sensor - M5 Pilot SPP ex 1 PSJ708-2G 1/ PSJ708-4G 1/ ex 1 18x24 Product Index ompact PSJ731 Pneumatic Threshold Sensor - 4mm Pilot SPP ex 1 PSJ731-M5 M5x PSJ731-2G 1/ PSJ731-4G 1/ PSJ731-6G 3/ PSJ731-8G 1/ ex 1 PSPE731 Pneumatic / Electric Threshold Sensor - SPP SPP ex 1 1 PSPE731-M5 M5x PSPE731-2G 1/ PSPE731-4G 1/ PSPE731-6G 3/ PSPE731-8G 1/ Miniature Swivel Plug-In In-ine heck locking Threshold Sensors ø M5 ex 1 10,5 PSPJ731 Pneumatic Threshold Sensor Pilot NPT ex 1 PSPJ /8 9/ PSPJ /4 5/ PSPJ /8 7/ Pneumatic ivision 25 Richland, Michigan

48 Notes Integrated Fittings Product Index ompact Miniature Swivel Plug-In In-ine heck locking Threshold Sensors Pneumatic ivision 26 Richland, Michigan

49 ccessories Section Safety low Guns rain irguard Protection Pressure Switches Relief & Exhaust Mufflers & Silencers Tanks & ir hucks Tank & ir hucks...2 EM Series Exhaust Mufflers...3 Muffler /...3 reather Vents...4 ES Series Silencer...4 SN ir ine Silencer...5 P6M ir ine Silencer...6 Muffler-Reclassifier ES...7 utomatic rip eg rain & Relief Valve...8 Relief - iaphragm Type...9 Shuttle & Quick Exhaust Pressure Switch...13 rain Safety low Guns Pneumatic ivision 1 Richland, Michigan

50 Features & Numbers Tank For tanks, steel barrels, compressors and other pneumatic containers where a dependable automatic air valve is needed. Equipped with standard valve core and sealing cap. Maximum operating pressure is 185 PSIG. Temperature range is -40 F to 220 F. ccessories Tank & ir hucks ir hucks For regular airlines. Model as a 1/8" pipe thread at bottom for minimum protrusion. N/P finish, dome shaped cap. Packed 25 to a box. 7/16" EX 23/32" Model all-foot air chuck, 1/4" female port. Packed 10 to a box. Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection 1/8" Model /8" pipe thread at bottom permits maximum protrusion. N/P finish, screwdriver type cap. Packed 25 to a box. 1-1/8" 1-9/32" Model all-foot air chuck with clip. Fits standard valve mouth. Saves holding on by hand. as 1/4" port for connecting to hose. Packed 10 to a box. rain 7/16" EX 1-3/4" Safety low Guns 1/8" Model as a 1/8" pipe thread part way up the stem which allows for minimum protrusion. N/P finish, has screwdriver type cap. Packed 25 to a box. 7/16" EX 13/16" 1/8" 1-3/4" Pneumatic ivision 2 Richland, Michigan

51 Muffler / Filters, Muffler / EM Series Sintered ronze Muffler / Filters Muffler / ccessories EM Series & Muffler / General escription Muffler / filters effectively reduce air exhaust noises to an industry accepted level with minimum flow restriction. They protect valves, impact wrenches, screw drivers and other air tools by preventing dirt and other foreign matter from entering the system. Non-corrosive. an be cleaned with many common solvents. Specifications Maximum Operating Pressure PSIG (ir) Operating Temperature... 0 to 300 F* * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. Pneumatic valves should be used with filtered and lubricated air. Model Number General escription Muffler / flow controls provide an acceptable exhaust noise level and effectively meter exhaust. Installed in valve exhaust ports, they control cylinder piston speeds throughout a wide range. The adjusting screw cannot be accidently blown out, can be locked to maintain setting. rass and bronze construction. lean with commonly used solvents. Specifications Pipe Overall ength ex EMM5 M5.75 5/16" EM12 1/8" /16" EM25 1/4" /16" EM37 3/8" /16" EM50 1/2" /8" EM75 3/4" /6" EM100 1" /16" EM /4" /16" EM /2" " Maximum Operating Pressure PSIG (ir) Operating Temperature... 0 to 300 F* * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. Pneumatic valves should be used with filtered and lubricated air. Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection rain Safety low Guns Model Number Pipe Overall ength ex /8" /16" /4" /2" /8" /16" /2" /8" /4" /16" " /16" Pneumatic ivision 3 Richland, Michigan

52 reather Vents, Silencers reather Vents ccessories reather Vents & ES Series Specifications Maximum Operating Pressure PSIG (ir) Operating Temperature... 0 to 300 F* * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. Pneumatic valves should be used with filtered and lubricated air. Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection General escription NOTE: reather vents should not be used as exhaust mufflers. These low silhouette versions of the muffler / filter are useful where space is a problem and / or to prevent contamination. Use for vacuum relief or pressure equalization in gear boxes, oil tanks, reservoirs, etc. Non-corrosive. ES Series Silencer Model Number Pipe General escription Overall ength ex /8" /16" /4" /16" /8" /16" /2" /8" /4" /6" " /16" /4" /16" /2" " The silencer is designed to give superior performance in noise control with a minimum effect on air efficiency. Trimline design allows location in the tightest places without extra plumbing and fittings. Fits directly into the exhaust port of more than 90% of present commercial valves. Slotted body permits rapid discharge of air without undesirable back pressure. Unique nylon screen element resists dirt buildup or clogging. rain Safety low Guns Specifications Maximum Operating Pressure PSIG (ir) Operating Temperature... 0 to 300 F* * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. Pneumatic valves should be used with filtered and lubricated air. Model Numbers imensions Pipe NPTF SPT (R) 100 PSIG Inlet ES12M ES12M 1/8" ES25M ES25M 1/4" ES37M ES37M 3/8" ES50M ES50M 1/2" ES75M ES75M 3/4" ES100M ES100M 1" 1, ES125M ES125M 1-1/4" 1, ES150M ES150M 1-1/2" 1, Pneumatic ivision 4 Richland, Michigan

53 ir ine Silencer Plastic ccessories SN Series M5, 1/8", 1/4", 3/8" & 1/2" Features ompact ightweight Easy to Install Excellent Noise Reduction Protects omponents from ontamination NPT and SPT s vailable pplication Number NPT S-5 SPT M5 SN-6 S-6 1/8" SN-8 S-8 1/4" SN-10 S-10 3/8" SN-15 S-15 1/2" 0.43 (11) 1.57 (40) 2.56 (65) 3.35 (85) 3.74 (95) 0.32 (8) 0.63 (16) 0.83 (21) 0.98 (25) 1.18 (30) Maximum (SFM) 100 PSIG Inlet Sound Pressure evel (d) 20 PSIG Inlet 100 PSIG Inlet Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection The plastic silencer is designed to give excellent noise reduction with a minimum effect on air efficiency. The Trimline design allows for locating the silencer in the tightest places without extra plumbing or fittings. Fits directly into the exhaust port of most commercial valves. Open surface area of element allows for rapid discharge of air without undesirable back pressure. rain Safety low Guns Specifications Pressure Rating...0 to 150 PSIG (0 to 10 bar, 0 to 1034 kpa) Temperature Rating...14 F to 140 F (-10 to 60 ) ody...cetal (Plastic) Element... Polyethylene Pneumatic ivision 5 Richland, Michigan

54 ir ine Silencer Plastic ccessories P6M Series G s Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection rain Features ll Plastic Ultra ight Weight Versions igh Noise evel Reduction ow ack Pressure Generation pplication The plastic silencer is designed to give excellent noise reduction with a minimum effect on air efficiency. The Trimline design allows for locating the silencer in the tightest places without extra plumbing or fittings. Fits directly into the exhaust port of most commercial valves. Open surface area of element allows for rapid discharge of air without undesirable back pressure. Number P6M-P5 Port M5 P6M-P1 G1/8 P6M-P2 G1/4 P6M-P3 G3/8 P6M-P4 G1/2 P6M-P6 G3/4 P6M-P8 G (23) 1.14 (29) 1.34 (34) 2.36 (60) 2.52 (64) 5.51 (140) 6.30 (160) iameter 0.26 (6,5) 0.55 (14) 0.67 (17) 0.98 (25) 0.98 (25) 1.50 (38) 1.89 (48) 0.16 (4) 0.24 (6) 0.24 (6) 0.35 (9) 0.43 (11) 0.55 (14) 0.79 (20) Weight (grams) Safety low Guns Specifications Pressure Rating... 0 to 246 PSIG (0 to 17 bar, 0 to 1700 kpa) Temperature Rating Plastic...14 F to 176 F (-10 to 80 )...14 F to 165 F (-10 to 74 ) Efficiency...92% Pneumatic ivision 6 Richland, Michigan

55 ir ine Muffler Reclassifier ccessories ES Series 1/2" & 1" Operation ompressor oils and lubricating oils are exhausted from valves, cylinders and air motors into the ES. Oil aerosols are coalesced into larger droplets and gravity pulls them into the attached drain sump. The sump can then be drained manually or by using a 1/4" I plastic tube drain. The air flowing into the ES is also muffled or silenced as it enters the inside of the ES and passes through the filter media into the atmosphere. Performance haracteristics da vs. Noise evel " Open Pipe 1/2" Open Pipe ES5 ES SFM Features dm 3 /s n bar 10 PSI 8 6 imensions: Model ES /2" 2.57 (135 mm) NPT (65 mm) ES " 2.57 (185mm) NPT (65mm) 4 2 ES3 ack Pressure ES5 ack Pressure SFM vs. ack Pressure dm 3 /s n The ES (Muffler-Reclassifier) eliminates unwanted oil mist and reduces exhaust noise from pneumatic valves, cylinders and air motors % Oil Removal Efficiencies 25 d Noise ttenuation 1/2" NPT and 1" NPT isposable Units ontinuous or Plugged rain Option Retained onstruction Fast Exhaust Time Improve Overall Plant Environment Exhaust oil mist and noise pollution have a direct impact on worker productivity. Oil aerosol mist from lubricators and compressors is pervasive and enters the industrial plant environment through the exhaust ports of valves, cylinders and air motors. This rapidly expanding exhaust also produces sudden and excessive noise. The ES (Muffler-Reclassifier) is 99.97% efficient at removing the oil aerosols. The ES also acts as a silencer to lower the d levels below O.S... requirements. The result is a cleaner, quieter environment which equates to greater work productivity and safety. Proven Technology The ES units are constructed from the same materials that go into our oil removal coalescing filter elements. The seamless design insures media uniformity and strength. This proven technology provides high coalescing efficiency with low pressure drop. The filter media is supported by cylindrical perforated steel retainers both inside and out. These retainers, fully plated for excellent corrosion resistance, give the ES units high rupture strength in either flow direction. These filters can also be used as high efficiency inlet or bypass filters for vacuum pumps, or breather elements to protect the air above critical process liquids. ES3 / ES5 The ES solves two problems inherent in compressed air exhaust from valves, cylinders and air motors - oil mist removal and noise abatement. The ES will improve your industrial plant environment, thereby improving worker productivity. Specifications Maximum Operating Temperature F (52 ) Maximum ine Pressure PSIG (6.8 bar) Ordering Information ES 3 * 3 1/2 inch 5 1 Inch Engineering evel * Will be entered at factory. Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection rain Safety low Guns Pneumatic ivision 7 Richland, Michigan

56 utomatic rip eg rain, Relief Valve utomatic rip eg rain ccessories Features & Operation Relief Valve Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection rain Safety low Guns Features uto rain Ported 1/8" to Pipe way iquid. rain has Manual Override Easily Serviced without Tool PSIG Range ompact Specifications ousing & ap...luminum Port s... 1/4" - 1/2" Top 1/8" rain Pressure and Temperature Ratings: owl to 250 PSIG (0 to 17.2 bar) 32 F to 175 F (0 to 80 ) Seals...una N Ordering Information mm 60 mm 22 mm onsists of rip eg rain ousing WIT uto rain. Model 061N 1/4" 063N 1/2" F 0.75 ex mm mm Features arge Relief apacity ( PSI when fully opened) in a ompact ightweight luminum onstruction with Resilient Seat pplication The RV011N Pop Off Relief Valve is designed to protect against excessive pressure buildup in a pneumatic circuit or system. Operation* With the relief valve mounted in a reservoir or system, the force of system pressure at () is offset by the force of spring () acting on poppet seat (). t pressures lower than the setting, the poppet seat () is held against the body at () effecting a seal. s pressure approaches set point, the poppet begins to vent until set point is reached, at which time the poppet seat () lifts off the body at () allowing the excess pressure to vent to atmosphere at (F). When the excess pressure has been vented, the spring () acts on the poppet seat () forcing it to seat on the body at (), sealing off the flow of air. Specification ody & djusting Screw...luminum ocking Nut...Steel Seat...Nitrile Spring...Steel Poppet... Plastic Operating Temperature...32 F to 200 F (0 to 93 ) Port s... 1/4 Inch Male Relief Range to 200 PSIG (.7 to 14 bar) with standard spring. * Ref: 1RV100 Installation & Service Instructions Ordering Information RV011N XXX Seals PSI lank V UN Flurocarbon Pneumatic ivision 8 Richland, Michigan

57 Relief - iaphragm Type 130 Relief Valve ccessories 130 & 134 Series 134 Relief Valve Inlet Inlet Features ompact, Sensitive iaphragm-type Relief Valve Push-pull, ocking Knob Knob and Top Work the Same as a Miniature Regulator 130 has ightweight luminum onstruction 134 has a brass body, captured exhaust and is an Inline Type with 3 Inlet Ports and 1 Outlet Port pplications esigned to Protect gainst Excessive Pressure uildup in a Pneumatic ircuit or System For Use where Gradual Proportional Relief is Required Operation Turn relief valve knob clockwise for maximum pressure. Set pressure going into relief valve at desired pressure. Turn relief valve knob counter-clockwise until exhaust starts to bleed. Turn relief valve knob clockwise until exhaust stops bleeding. Push to lock knob. imensions.22 ia. 1/4" Pipe INET mm mm mm mm mm 1/4" Pipe INET mm 1/8" Pipe INET FRONT & K FOW IRETION mm mm mm mm 1/4" Pipe OUTET Relief Valve Kits onnet ssembly Kit...PKR364Y Panel Mount Nut...PR05X51 Specifications Relief Range...0 to 100 PSIG (0 to 6.9 bar) Maximum Inlet Pressure PSIG (20.7 bar) Operating Temperature F to 120 F (4 to 49 ) Port s: /4" Pipe Male Only Inlet Port Two 1/8" & One 1/4" Pipe Outlet Port 1/4" Pipe Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection rain Safety low Guns Ordering Information Relief Spring Range Valve 0-15 PSIG 0-25 PSIG 0-50 PSIG PSIG P* P* P* P* P* P* P* P* * Panel mount nut included. Materials of onstruction djusting Knob... Polypropylene djusting Screw...Zinc-plated Steel ody...luminum (130); rass (134) iaphragm / isc...una-n Nut...hromated Steel Spring age...cetal Spring...Zinc-plated Steel Pneumatic ivision 9 Richland, Michigan

58 Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection Pneumatic Products irline ccessories Quick Exhaust & Shuttle 1 3 Port 3 (Exh) General Information 2 Quick exhaust valves provide rapid exhaust of control air when placed between control valve and actuator. They can also be used as shuttle valves. iaphragm materials are available in urethane, Nitrile, Fluorocarbon, and PTFE to meet a wide variety of operating conditions. 1 3 Port 1 (In) Port 2 (yl) 2 ccessories 0R Series 1/8" thru 3/4" Ports Valve Specifications Operating Pressure (ir) Maximum: 150 PSIG 200 PSIG for Model 0R37T (PTFE diaphragm) Minimum: 3 PSIG 50 PSIG for Model 0R37T (PTFE diaphragm) Operating Temperature: Urethane: 0 F to 180 F* (-18 to 80 ) Nitrile: 0 F to 180 F* (-18 to 80 ) Fluorocarbon: 0 F to 400 F* (-18 to 205 ) PTFE: 0 F to 500 F* (-18 to 260 ) * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. Pneumatic valves should be used with filtered and lubricated air. omponent Materials ody Material... ie cast aluminum Static Seals...Nitrile standard with urethane (Others see below) iaphragm... Standard Urethane Optional Fluorocarbon, PTFE, or Nitrile (epending on size) Mounting racket Kit (Including body screws) For 0R12 and 0R25 sizes with 7/8" imension. rain Safety low Guns Model Selection, Performance ata and imensions Port Model Number Service (SFM ) NPTF SPP G Kit STNR Urethane diaphragms (Nitrile static seals) 1/4" 1/4" 3/8" 150 0R25N 0R25N 1" ex /8" 3/8" 240 0R25P 1" ex /8" 3/8" 3/8" 240 0R37 0R37 1" ex /2" 1/2" 1/2" 450 0R50 0R50 1-1/2" ex /4" 3/4" 3/4" 550 0R75 0R75 1-1/2" ex Nitrile diaphragms (Nitrile static seals) 1/8" 1/8" 1/8" 70 0R12 0R12 7/8" Sq /8" 1/4" 70 0R12N 0R12N 7/8" Sq /4" 1/4" 1/4" 90 0R25 0R25 7/8" Sq /4" 3/8" 90 0R25NF 0R25NF 7/8" Sq /8" 3/8" 3/8" 240 0R37F 0R37F 1" ex /4" 3/4" 3/4" 550 0R75F 0R75F 1-1/2" ex Fluorocarbon diaphragms for extended temperature operation (Fluorocarbon static seals) 1/8" 1/8" 1/8" 70 0R12V 0R12V 7/8" Sq /8" 1/4" 70 0R12NV 0R12NV 7/8" Sq /4" 1/4" 1/4" 90 0R25V 0R25V 7/8" Sq /8" 3/8" 3/8" 240 0R37V 0R37V 1" ex /2" 1/2" 1/2" 450 0R50V 0R50V 1-1/2" ex /4" 3/4" 3/4" 550 0R75V 0R75V 1-1/2" ex PTFE diaphragms for higher pressure and temperature (Fibre static seals) 3/8" 3/8" 3/8" 240 0R37T 0R37T 1" ex t 100 PSIG inlet pressure with full pressure drop. O ITEMS RE MOST POPUR. Pneumatic ivision 10 Richland, Michigan

59 Shuttle Valve ccessories 1/8" to 3/8" Ports General Information Shuttle valves determine a single pneumatic output from two separate inputs. If pressure is applied to both ports simultaneously, the valve will select the port with the higher pressure. Valve Specifications F E INET 1 INET J Maximum Operating Pressure PSIG Maximum 3 PSIG Minimum: ifferential Pressure Operating Temperature...0 to 160 F* * mbient temperatures below freezing require moisture-free air. mbient temperatures below freezing and above 180 require lubricants especially selected for suitability at these temperatures. Pneumatic valves should be used with filtered and lubricated air. Tanks & ir hucks omponent Materials ody Material...luminum Internal omponents... luminum Seals...Nitrile G OUTET K (3 Ports) ia. (2 oles) Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection Model Selection and imensions Model Port imensions Number 1 E F G J K N /8" N/ / N /4" / N /8" / rain Safety low Guns Performance ata Model Number Port (v) N /8" 0.32 N /4" 1.65 N /8" 2.02 Pneumatic ivision 11 Richland, Michigan

60 Quick Exhaust & Shuttle Valve ccessories Typical pplications Typical Quick Exhaust Valve pplications Pressure Man Pressure Pressure Reg Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Rapid Retraction ouble cting ylinder In this circuit, air is exhausted through a Quick Exhaust Valve that is close coupled to the cap end of the cylinder. ecause the Quick Exhaust Valve has a greater exhaust capacity than the four-way ontrol Valve, increased cylinder speed can be accomplished with a smaller and less expensive control valve. ual Pressure ctuation of ouble cting ylinder This circuit utilizes a Quick Exhaust Valve and a three-way ontrol Valve to permit rapid extension of the cylinder at a high pressure. nder life. NOTE: ine pressure must be 3 or 4 times greater than rod end pressure. Effective working pressure is the differential between the cap and rod end. i-irectional ontrol of Two ouble cting ylinders This circuit provides maximum control with a minimum of valving. large four-way ontrol Valve is not needed to permit the rapid retraction of ylinder, as the Quick Exhaust Valve performs this function. The extension of ylinders and and retraction of ylinder are controlled by Speed ontrol. Pressure Switches irguard Protection rain Safety low Guns Man Typical Shuttle Valve pplications M an Operation Man Operation 2 Operation 3 Man M N Pressure Operation 1 Man Man Pressure Pressure OR ircuit The most common application of the Shuttle Valve is the OR ircuit. ere a cylinder or other work device can be actuated by either control valve. The valves can be manually or electrically actuated and located in any position. Memory ircuit This circuit enables continuous operation once initiated. Pressure is delivered to the circuit when Valve is actuated. This allows pressure to pass through the shuttle valve actuating Valve. Pressure then flows through Valve and also the other side of the shuttle valve which holds Valve open for continuous operation. To unlock the circuit, Valve must be opened to exhaust the circuit and allow Valve to return to its normally closed position. Interlock This circuit prevents the occurrence of a specific operation while one or another operation takes place. When either Valve or is actuated to perform operation 1 or 2, Valve is shifted to the closed position and prevents operation 3 from occurring. Pneumatic ivision 12 Richland, Michigan

61 Pressure Switch ccessories PPS1 Series Pressure Switch PPS1 1 (ommon) 3 (Normally Open) 2 (Normally losed) 1.50 (38.1) Top View IN GN Pin onfiguration Pin 1 - ommon (lack) Pin 2 - N.. (lue) Pin 3 - N.O. (Red) Wire onfiguration Pin 1 - ommon (lack) Pin 2 - N.. (lue) Pin 3 - N.O. (Red) 1.20 Ø (30.5) 18 eads 2.50 Max. (63.5) 2.30 Max. (58.4) Features: ong life elastomer diaphragm igh quality snap action switch Field adjustable ompact design Easily customized Quick delivery NEM 4, 13 Operation The pressure switch monitors the air pressure in your pneumatic system. When the pressure in your system either drops below or exceeds the set point pressure, an electrical output is given. Ordering Information Set Point Electrical ircuit Range irrection onnection PPS R M 1 1/4" NPT Male 2 1/8" NPT Male 17 1/4" SPP Male 18 1/8" SPP Male ircuit SPT Note: Switch is field adjustable. Set Point irection R Rising Range* PSI PSI PSI PSI Only available in 1/4" NPT Electrical onnection M IN 9.4mm W Wire eads 18" * Factory setting for calibration purposes Range 1 = 6 PSI Range 2 = 18 PSI Range 3 = 70 PSI Range 4 = 250 PSI 1-1/8 ex 1/8-27 NPT 1-1/8 ex 1/4-18 NPTF efinitions and Terminology Repeatability ccuracy is the maximum allowable set point deviation of a single pressure or temperature switch under one given set of environmental and operational conditions. Single Pole ouble Throw (SPT) Switching element SPT switching element has one normally open, one normally closed and one common terminal. Three terminals mean that the switch can be wired with the circuit either normally open (NO), or normally closed (N), or both. ead and The dead band, sometimes referred to as differential or hysterisis, is the change in pressure between actuation and deactuation set points. Specifications Set Point Tolerance... ±1 PSI or 5% (.07 bar) Temperature Range...-40F to 220F (-40 to 105 ) Max. Operating Pressure (Ranges 1, 2, 3) PSI (17.2 bar) Max. Operating Pressure (Range 4) PSI (137.9 bar) eadband % of set pressure urrent Rating V 30 V (Resistive) ircuit Form...SPT Standard ycle ife...1 Million Materials of onstruction djustment Knob...nodized luminum ody...rass iaphragm...nitrile Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection rain Safety low Guns Pneumatic ivision 13 Richland, Michigan

62 Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection rain Safety low Guns Pneumatic Products irline ccessories utomatic Electrical rain Valve WV3-G The WV3 Electrical rain is designed to remove condensate from compressors, compressed air dryers and receivers up to any size, type or manufacturer. The WV3 offers true installation simplicity and it is recognized as the most reliable and best performing condensate drain worldwide. The large orifice in the direct acting valve, combined with its sophisticated timer module ensure many years of trouble-free draining of condensate. enefits oes Not ir-ock uring Operation ompressed ir Systems Up to ny lso vailable In Stainless Steel The irect cting Valve Is Serviceable Suitable for ll Types of ompressors TEST (Micro-Switch) Feature igh Time ycle ccuracy arge (4.5mm) Valve Orifice ccessories WV3 Series Specifications Operating Pressure PSIG (15,9 bar) mbient Operating Range Temperature: 34 to 130 F (1.1 to 54 ) oil Insulation lass F (171.1 ) Voltages...115, 230/50-60 Timer: Open Time....5 to 10 sec., djustable ycle Time....5 sec. to 45 min., djustable Maximum urrent Rating...4m Max. Port... 1/4, 3/8, 1/2 NPT Weight lb. (0.8 kg) Materials of onstruction Valve ody...rass / Stainless Steel Enclosure (NEM 4)... S Plastic Internal s...rass / Stainless Steel Sealing Material... FPM (Fluorocarbon) Ordering Information Pipe Valve Family Voltage Material Pressure WV3 G 1 2 ON TEST OFF ohm 45 Family G General Voltage 1 120V 2 230V 3* 24V * vailable in 1/2" Only Pipe 2 1/4" General 3 3/8" General 4 1/2" General Pressure 230 PSIG (16 bar) Valve Material rass Model Selection and imensions Model Number WV3-G** 1.73 (44) 4.53 (115) 3.46 (88) Pneumatic ivision 14 Richland, Michigan

63 Zero oss ondensate rain ccessories E Series Zero air loss condensate drains are designed for economical removal of unwanted water, oil emulsions, and other liquids. These drains will only open when liquid is present and will not allow any compressed air to escape from the system. Operating Information Maximum pressure 232 PSIG (16 bar) mbient operating temperature 35 F to 140 F (1.6 to 60 ) Voltages NPT 115/50-60z, standard Optional: SPP ports 230/50-60z & 24V Zero ir oss ondensate rains Port size (NPT) ompressor ftercooler (SFM)* apacity Refrigeration ryer (SFM)** Where are condensate drains used? Filter (SFM) rain apacity per ay (gal/liter) Model Number Service Kit 3/8 (in), 3/8 (out) (22.7) E3002N115-K SKE3000N115 1/2 (in), 3/8 (out) , (49.2) E3004N115-K SKE3000N115 1/2 (in), 3/8 (out) , (87.1) E3007N115-K SKE3000N115 1/2 (in), 3/8 (out) 1,059 2,119 10, (378.5) E3030N115-K SKE3000N115 1/2 (in), 3/8 (out) 3,532 7,063 35, (1,249.2) E3100N115-K SKE3000N115 * ased on 100 PSI working pressure, air compressor inlet at 77 F (25 ) at 60% R, air discharge temperature od 95 F (35 ) following the aftercooler, pressure dewpoint of 37 F (2.8 ) after the refrigerated dryer. ** ondensate from aftercooler or refrigerated dryer to be drained upstream only for residual oil content or small quantities of condensate. Note: 6 ft. line cord will be included with each drain. Tanks & ir hucks Safety low Guns Mufflers & Silencers rain Relief & Exhaust Pressure Switches irguard Protection ompressor with aftercooler Receiver tank Filter ir dryer rip leg Removes the condensate that is collected after the air cools in the aftercooler Removes the condensate that is collected when the air cools inside of the receiver tank Removes the condensate that is collected in the filter bowl Removes the condensate that is collected in the air dryer Point-of-use applications: removes the condensate from compressed air pipes in a plant imensions E3100N115-K 1/2 E3002N115-K 4.33 (110mm) 3/ ia. ia. E3004N115-K 4.37 (111mm) 3.98 (101mm) 1/ ia. ia. E3007N115-K 1/2 1/ (122mm) 1/ ia. ia. E3030N115-K 1/2 1/ (137mm) 1/ ia. ia. 1/ (197mm) 1/ ia. ia. G3/8 G3/8 G3/8 G3/8 G3/ (67mm) 2.64 (67mm) 2.64 (67mm) 2.64 (67mm) 2.64 (67mm) 5.75 (146mm) 5.47 (139mm) 6.14 (156mm) 6.14 (156mm) 6.14 (156mm) Pneumatic ivision 15 Richland, Michigan

64 Safety low Guns ccessories rass Nozzle & Vortec FO-GIN low Guns O.S... ertification ll safety blow guns conform to the requirements of ompressed ir Standards as currently described in the U.S. ureau of abor Standards, paragraph , when pressurized at the inlet to a maximum of 100 PSIG. onform to current O.S... irective rass Nozzle low Guns ontoured lever or button control both provide a natural, comfortable grip even when used with gloves. Finger guard and hang-up hook for finger protection and quick safe storage. ie cast zinc body, painted finish. ever Operated Number Inlet Port SFM Rating* /4" 20 Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection rain Safety low Guns utton Operated Number *ased on 100 PSIG inlet pressure. Inlet Port SFM Rating* /4" 20 Vortec FO-GIN low Guns quiet Vortec FO-GIN nozzle is combined with a high performance blow gun. ompressed air attains sonic velocity through an adjustable slot and attaches to the exterior surface of the cone shaped nozzle. Settings are shown on a micrometer dial. Sound level of 80 d with 80 PSIG inlet. Finger guard and hang-up hook offers desirable finger protection and quick secure storage. ie cast zinc body, painted finish. ever Operated Number Inlet Port SFM Rating* /4" 70+ utton Operated Number Inlet Port SFM Rating* /4" 70+ *ased on 100 PSIG inlet pressure. Pneumatic ivision 16 Richland, Michigan

65 Safety low Guns Self-Regulating low Gun esigned with integral self-regulating pressure reducing valve for automatic shut-off when nozzle is blocked. Prevents air pressure buildup over 30 PSIG in compliance with U.S. ept. of abor standards. ir shield aids in protecting the operator against blow back of flying chips of dirt. esigned to operate at less than 90 d to comply with government regulations. ie cast zinc body, painted finish. ccessories Self Regulating Guns & Pistol Grip low Guns rass Nozzle Model General purpose nozzles are supplied as standard on , and blow guns. onform to the requirements of the Williams Steiger Occupational Safety and ealth ct of 1970, paragraph when fitted with blow guns pressurized at the inlet to a maximum of 100 PSIG. onform to O.S... irective ever Operated Number Inlet Port SFM Rating* /4" 10 Performance ata Inlet Pressure locked Pressure Sound evel 70 PSIG 17.0 PSIG 79 d 100 PSIG 21.0 PSIG 83 d 175 PSIG 28.0 PSIG 87 d *ased on 100 PSIG inlet pressure. 470 and 475 Series low Guns Plunger Unit (For utton Models) Plunger ssembly (For ever Models) O-Ring Nut eflator *Washer *Spring Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection Pistol Grip low Gun Pistol grip is easy to aim for quick and efficient cleaning. Ideal for all shop housekeeping purposes. ightweight and easy to handle. Easy trigger action features instant spring adjustment for controlled air. Get the amount of air where you want it with no restrictions, no cut-offs! Makes for a convenient connection for overhead or under bench floor air use. * ontained in Service Kit Nose rain Safety low Guns Number Inlet Port Rated Pressure Temperature Range OS Rated G441-N 1/4" 175 PSI 120 F No Pneumatic ivision 17 Richland, Michigan

66 Notes ccessories Tanks & ir hucks Mufflers & Silencers Relief & Exhaust Pressure Switches irguard Protection rain Safety low Guns Pneumatic ivision 18 Richland, Michigan

67 all 1/4" to 2", 2-Way 1/4" to 1", 2-Way Vented Plug 1/8" to 1/4" Pipe Section E E Plug Stainless Steel all all Product Index Product Index...E2 all asic Features...E3 Numbers & imensions...e4 Stainless Steel all...e5 Plug asic Features...E6 Numbers & imensions...e7 rain ocks asic Features...E8 Numbers...E8 Pneumatic ivision E1 Richland, Michigan

68 Product Index all, Plug and rain ocks Fittings XV500P Female-Female MV200 Mini Valve MV608 Mini Valve MV609 Mini Valve rass all Page E4 PageE4 Page E4 Page E4 XV502SS Female-Female Stainless Steel Page E5 E Plug & rain ocks PV607 Male-Male Plug Valve PV608 Male-Female Plug Valve PV609 Female-Female Plug Valve 602 Internal Seal rain ock 604 External Seal rain ock Product Index Page E7 Page E7 Page E7 Page E8 Page E8 all Stainless Steel all Plug Pneumatic ivision E2 Richland, Michigan

69 Features all, Plug and rain ocks rass all Materials of onstruction Valve ody: Forged brass all: hrome plated brass Seats / Seals: PTFE andle: Steel Style Type Material Options Style Type Operating Instructions: Pressure Range: Temperature Ranges: Note: V 500 P Material Options V-Valve VP-Valve, Padlocking handle VV-Valve, Vented VVP-Valve, Vented, Padlocking handle 500-Female / Female PTF ports P- rass PN-Nickel plated 4 = 1/4", 6 = 3/8", 8-1/2", 12 = 3/4", 16 = 1", 20 = 1-1/4", 24 = 1-1/2", 32 = 2" 01-Stainless steel ball & stem 02-Stainless steel handle & nut 03-Stainless steel ball, stem, handle & nut 04-Tee handle 08-Unmarked yellow vinyl handle cover 21-Oval handle Specifications Quarter turn is ON or OFF. (Provides positive stop action for full shutoff.) 600 WOG, cold non-shock Saturated steam up to 150 PSI and 400 F Vacuum service to 29 inches g. Vented up to 250 PSI 0 to +350 F Periodically check the adjustable packing nut and tighten as required. Parker s industrial ball valve product line is intended for general purpose use. Please be aware that ball valves are intended for use in the fully open or closed positions. epending on application conditions, throttling of the valve may result in premature seal failure and/or inability to turn the valve handle. For use as fuel line shutoffs for gasoline and diesel powered over the highway, off highway, and construction equipment vehicles. Water and air service lines on capital equipment and plant design plumbing that require total shutoff capability. Pressure (psi) Temperature ( F) 1/4" to 1" 1 1/4" to 2" E Product Index all Stainless Steel all Plug ata Valve v 1/ / / / / / Pneumatic ivision E3 Richland, Michigan

70 Numbers all, Plug and rain ocks rass all ex. ex. N Female-Female Pipe Ends XV500P Pipe ex ex h l m n ia. XV500P-4 1/4 15/16 15/ XV500P-6 3/8 15/16 15/ XV500P-8 1/2* 1-1/16 1-1/ XV500P-12 3/4** 1-1/4 1-5/ XV500P-16 1** 1-1/2 1-9/ M Female Pipe Ends, ompact andle, Mini all Valve MV609 Pipe ex c ia. MV / MV / MV / MV / MV /8x1/ E Product Index all Stainless Steel all Plug Female Pipe Ends, ever andle, Mini all Valve MV200 Pipe ex c h l ex. ia. MV / MV / MV / MV / Male-Female Pipe Ends, ompact andle, Mini all Valve MV608 Pipe ex c ia. MV / MV / MV / MV / Pneumatic ivision E4 Richland, Michigan

71 Features & Numbers all, Plug and rain ocks Stainless Steel all Valve ody: all: Seats / Seals: andle: Materials of onstruction F-8M Stainless Steel Stainless Steel PTFE Stainless Steel Pressure and Temperature Range Pressure Range Temperature Range 2,000 PSI s: 1/4" - 1" 1,500 PSI s: 1-1/4" - 2" 0 to +400 F Style Type Material Options V 502 SS V - Valve Style VP - Valve, Padlocking handle Type Material Options pprovals Meets material requirements of NE MR Valve ata v 1/ / / / / / Panel mount female/female PTF ports SS-stainless steel 4 = 1/4", 6 = 3/8", 8 = 1/2", 12 = 3/4", 16 = 1", 20 = 1-1/4", 24 = 1-1/2", 32 = 2" 20 - Short handle 21 - Oval handle 35 - Welded retainer nut Note: Periodically check the adjustable packing nut and tighten as required. Pressure (psi) Parker s industrial ball valve product line is intended for general purpose use. Please be aware that ball valves are intended for use in the fully open or closed positions. epending on application conditions, throttling of the valve may result in premature seal failure and/or inability to turn the valve handle. pplications include chemical plants, refineries, steel mills, industrial fuel lines and agricultural equipment. Meets material requirements of NE MR Temperature ( F) 450 1/4" to 1" 1-1/4" to 2" Mounting etail X Ø E Product Index all Stainless Steel all Plug Female Pipe Ends, Panel Mount XV502SS Pipe Thd (NPT) / ex F G I Thd M N Panel ia. ole ia. XV502SS-4 1/4 15/ UN F UN 2 ON OFF G XV502SS-6 3/8 15/ UN XV502SS-8 1/2 1-1/ UN XV502SS-12 3/4 1-3/ UN XV502SS / UN XV502SS / /4-20 UN ex. ex. N XV502SS /2 2-3/ /4-20 UN XV502SS /4-20 UN M Pneumatic ivision E5 Richland, Michigan

72 Features all, Plug and rain ocks rass Plug Materials of onstruction Fitting: rass Nut: rass Ferrule: rass Example: PV607-2-options PV Nomenclature ttribute: Plug valve 607 Male to male 2 1/8" Male N (not shown) V (not shown) Neoprene (brown) Florocarbon (red) E Specifications Pressure Range Up to 250 PSI Temperature Range -40 to +175 F Product Index all ompact design features internal nitrile seals and a one-piece extruded brass body, offering compatibility with a wide range of media. The one-piece stem / handle combination is constructed of glass reinforced acetal copolymer. Parker plug valves feature 1/4 turn shutoff allowing for ease of operation. ll plug valves are 100% leak tested and are certified to be leak free to one SM. Stainless Steel all Plug Installation Instructions To assure sealability and reliable performance, the valve must be installed so that the flow media travels in the direction of the arrow on the valve handle. Valve omponents cetal copolymer reinforced for strength highly compatible with most media Triple O-Ring Seal 420 Stainless Steel Stopping Pin Extruded rass ody (360) 302 Stainless Steel lip Pneumatic ivision E6 Richland, Michigan

73 Numbers all, Plug and rain ocks rass Plug N1 N Male Pipe to Male Pipe Plug Valve PV607 Pipe M N N1 ia. PV / PV / M N N1 M E Female Pipe to Male Pipe Plug Valve PV608 Pipe M N N1 ia. PV / PV / Product Index all Stainless Steel all N1 Female Pipe to Female Pipe Plug Valve PV609 Pipe M N N1 ia. PV / PV / M N Plug Pneumatic ivision E7 Richland, Michigan

74 Features & Numbers all, Plug and rain ocks rain ocks Example: rain ock Nomenclature rain ock ttribute: 604 External Seat 2 1/8 Pipe E Product Index all Stainless Steel all V Ground Plug Shutoff Nomenclature Example: V204F-4-2 Valve ttribute: 204 Flared to Male Pipe F Flared 4 1/4 Tube O.. 2 1/8 Pipe Ground plug shutoff: rain ocks Temperature Ranges: Operating Fluid: Note: Specifications 30 PSI 150 PSI See specific part number for temperature range ir, water, gas and certain other fluids. ubricant may not be compatible with some fluids, contact factory for special fluid requirements rain cocks are manufactured in both external and internal seats. Ground plug shutoffs are manufactured from castings or forged bodies for extra strength. and tightening provides a metal - to - metal seal. Plug Internal Seal rain ock 602 ex. M losed External Seal rain ock 604 ex. M losed Temperature Range: -65 to +250 F Temperature Range: -25 to +250 F Pipe ex /8 13/ /4 9/ M Pipe ex 604-2* 1/8 7/ /4 9/ * 3/8 11/ M *When assembled handle wings are down facing Pneumatic ivision E8 Richland, Michigan

75 Quick ouplings Section F F Economatic Quick onnect ouplers Saflomatic ouplers Slevematic ouplers Industrial Interchange Nipples Industrial Interchange Nipples...F2-F3 Sleevmatic ouplers...f4-f6 Saflomatic ouplers...f7-f8 Economatic Quick onnect ouplings...f9-f10 Pneumatic ivision F1 Richland, Michigan

76 Numbers & imensions escription Industrial interchange nipples conform to MI-4109 and are for use with either Sleevmatic or Saflomatic couplers. The industrial interchange nipples are completely interchangeable with similar nipples manufactured by other quick coupling manufacturers conforming to (formerly known as MI--4109F), NSI/(NFP) T , or ISO6150- requirements. Quick ouplings Industrial Interchange Nipples ardened wear points and solid barstock construction provide long service life. Precision machined surfaces and hardened load-bearing areas resist the effects of mechanical shock in the most rugged applications. Female Pipe Male Pipe F F E E Industrial Interchange Nipples Slevematic ouplers Saflomatic ouplers Economatic Quick onnect ouplers ody (Inches) Steel F G Overall ength Exposed ength* E ex F argest iameter G 1/4 1 1/ /4 3 1/ /4 3-E 3/ /8 1E 1/ /8 3E 3/ /8 3E-F 1/ /2 1F 3/ /2 3F 1/ /2 3F-G 3/ /4 3G-F 1/ /4 3G 3/ /4 3G-J 1-11½ * This dimension represents portion of nipple that is exposed when nipple is inserted in the coupler. ody (Inches) Steel F G Overall ength Exposed ength E ex F argest iameter G 1/4 0 1/ /4 2 1/ /4 2-E 3/ /8 00E 1/ /8 0E 1/ /8 2E 3/ /8 2E-F 1/ /2 0F 3/ /2 2F 1/ /2 2F-G 3/ /4 2G-F 1/ /4 2G 3/ /4 2G-J 1-11½ * This dimension represents portion of nipple that is exposed when nipple is inserted in the coupler. Pneumatic ivision F2 Richland, Michigan

77 Numbers & imensions Standard ose arb Quick ouplings Industrial Interchange Nipples Push-ok ose arb** E E G G ody (Inches) Steel ose I.. Overall ength Exposed ength* E argest iameter G 1/4 8 1/ /4 8-5/ /4 9 3/ /8 5E 3/ /8 6E 1/ /2 4F 3/ /2 5F 1/ /2 5F-G 3/ /4 5G-F 1/ /4 5G 3/ /4 5G-J * This dimension represents portion of nipple that is exposed when nipple is inserted in coupler. ody (Inches) Steel ose I.. Overall ength Exposed ength* E argest iameter G 1/4 8P 1/ /4 9P 3/ /8 4EP 1/ /8 5EP 3/ /8 6EP 1/ /2 4FP 3/ /2 5FP 1/ /2 6FP 1/ * This dimension represents portion of nipple that is exposed when nipple is inserted in coupler. ** Push-ok hose barbs are designed for use with a push-lok hose and do not require clamps. F Industrial Interchange Nipples Economatic Quick onnect ouplers Saflomatic ouplers Slevematic ouplers Pneumatic ivision F3 Richland, Michigan

78 Features & Specifications Quick ouplings Sleevmatic ouplers F Industrial Interchange Nipples Slevematic ouplers Saflomatic ouplers Operation Sleeve type couplings are widely used to connect air and low-pressure fluid hose lines. Their compact and economical design uses a ball locking mechanism consisting of captive steel balls that engage the locking groove on the mating nipple. s pictured, the sliding spring loaded sleeve on the coupler must be manually retracted in order to connect or disconnect the nipple. It is easy to do, but two hands are normally required. ommon applications include compressed air, water, grease, paint, limited vacuum and limited gases. Features 1. ardened wear points and solid barstock construction provide long life for these quality couplings. Precision machined surfaces resist the effects of mechanical shocks, even in rugged use. 2. Tubular valve with large flow passages delivers high air flows with minimal pressure drop for efficient performance. 3. Molded seals with high quality valve seats form a bubble tight seal for reliable sealing within rated working pressures. The tubular valve minimizes wear on the seal and prolongs seal life. 4. all locking mechanism with large numbers of steel or stainless steel locking balls improves resistance to wear, insures positive connections and provides accurate alignment. The ball locking also allows swiveling action that reduces hose torque. 5. Sleeve guard resists accidental disconnection by allowing the coupling to ride over obstructions without the sleeve being accidentally retracted. It also contributes to greater strength. 6. Knurling and grooves on sleeve provide gripping surfaces for ease of operation. 7. Wide range of sizes, materials and end terminations are available. Sleeve type quick couplings are offered with male pipe, female pipe, push-lok hose barb and standard hose barb ends. Materials offered are Nitrile, Ethylene, Propylene and Fluorocarbon for seals and brass or steel for metals. 8. Interchangeability. Sleevmatic couplers are used with industrial interchange nipples conforming to MI Economatic Quick onnect ouplers Specifications ody 1/4 3/8 1/2 Rated Pressure (psi) Temperature Range Nitrile -40 F to 250 F Ethylene Propylene -65 F to 400 F Fluorocarbon -30 F to 400 F ocking evice 4 alls 8 alls 8 alls Vacuum ata (inches g)* isconnected (coupler only) Not recommended onnected * ouplings for vacuum service should be 100% tested an extra cost service. onsult factory. Performance Sleevmatic 1/4", 3/8", 1/2" ir in SFM Series (1/4", 3/8", 1/2" sizes) 1/2" 3/8" 1/4" Pressure rop in PSI 100 PSI Inlet Pressure 80 PSI Inlet Pressure Pneumatic ivision F4 Richland, Michigan

79 Numbers & imensions Female Pipe Quick ouplings Sleevmatic ouplers Male Pipe ody Overall ex argest ength iameter (Inches) rass Steel 1/4 23 1/ /4 23 1/ /4 23E 3/ /8 25 1/ /8 25 3/ /8 25F 1/ /2 17E 3/ /2 17 1/ /2 17G 3/ ody Overall ex argest ength iameter (Inches) rass Steel 1/4 22 1/ /4 22 1/ /4 22E 3/ /8 24 1/ /8 24 3/ /8 24F 1/ /2 16E 3/ /2 16 1/ /2 16G 3/ NOTE: To indicate Fluorocarbon seals, add the letter Y as a suffix to the catalog number of the coupler. To indicate Ethylene Propylene seals, add the letter W as a suffix to the catalog number of the coupler. Example: 23Y or 23W F Industrial Interchange Nipples Slevematic ouplers Economatic Quick onnect ouplers Saflomatic ouplers Pneumatic ivision F5 Richland, Michigan

80 Numbers & imensions Standard ose arb Quick ouplings Sleevmatic ouplers Push-ok ose arb* F Industrial Interchange Nipples ody ose Overall ength ex argest iameter (Inches) rass Steel I.. 1/ / / / / / / / / / / / / / / / ody (Inches) rass Steel ose I.. Overall ength ex argest iameter 1/4 20-3P 1/ /4 20-5P 3/ /8 24-5P 3/ /2 16-5P 3/ /2 16-6P 1/ * Push-ok hose barbsd are designed for use with push-lok hose and do not require clamps. NOTE: To indicate Fluorocarbon seals, add the letter Y as a suffix to the catalog number of the coupler. To indicate Ethylene Propylene seals, add the letter W as a suffix to the catalog number of the coupler. Example: 20-3Y or 20-3W Slevematic ouplers Saflomatic ouplers Economatic Quick onnect ouplers Repair Kits ody Nitrile Fluorocarbon Ethylene Propylene 1/4 21K 21KY 21KW 3/8 14K 14KW 1/2 16K 16KY 16KW Pneumatic ivision F6 Richland, Michigan

81 Features & Specifications Quick ouplings Saflomatic ouplers Operation Push type couplings feature one-handed automatic connection by pushing the nipple into the coupler provided the coupler half is firmly mounted. The locking mechanism of Saflomatic push type couplers consists of pawls or pins which act directly on the sleeve, thereby causing the sleeve to automatically retract when the mating nipple is inserted. The sleeve must be manually retracted in order to remove the nipple. Saflomatic couplings are push type single shut off couplings. ommon applications include compressed air, water, grease, paint, limited vacuum and limited gas. Features 1. Saflomatic tubular valves with their large flow windows deliver high air flow with minimum pressure drop for efficient performance of air tools and other actuators. The tubular valve also provides 360 degree seal support to prevent cold flow and bore constriction, thereby extending seal life. 2. Tapered flow recesses in the valve body provide maximum flow capability. 3. Precision molded seals with high quality valve seats for a bubble tight seal that assures reliable sealing within rated working pressures. The Saflomatic design with its 360 seal support gives maximum seal retention. 4. ocking pawls are of hardened stainless steel for a durable locking mechanism that provides good alignment and sideload resistance. 5. Push-to-connect design permits one-handed connection when the coupler half is rigidly mounted. 6. ack pressure vent holes allow easier connections especially with liquids. 7. ardened wear points and solid barstock construction provide long life for these quality couplings. Precision machined surfaces resist the effects of mechanical shocks, even in rugged use. 8. Interchangeability. Saflomatic couplers are used with industrial interchange nipples conforming to MI F Industrial Interchange Nipples Slevematic ouplers Saflomatic ouplers Specifications ody 1/4 3/8 1/2 3/4 Rated Pressure (psi) Temperature Range Nitrile -40 F to 250 F Ethylene Propylene -65 F to 400 F Fluorocarbon -30 F to 400 F ocking evice pawls pawls pawls pawls Vacuum ata (inches g)* isconnected (coupler only) Not recommended onnected Performance Saflomatic 1/4" to 3/4" ir in SFM Series (1/4" & 3/8" sizes) 1/4" 3/8" ir in SFM Series (1/2" & 3/4" sizes) 3/4" 1/2" Economatic Quick onnect ouplers * ouplings for vacuum service should be 100% tested an extra cost service. onsult factory Pressure rop in PSI 100 PSI Inlet Pressure 80 PSI Inlet Pressure Pressure rop in PSI 100 PSI Inlet Pressure 80 PSI Inlet Pressure Pneumatic ivision F7 Richland, Michigan

82 Numbers & imensions Female Pipe Quick ouplings Saflomatic ouplers Standard ose arb F ody (Inches) rass Overall ength ex argest iameter 1/4 33 1/ /4 33 1/ /4 33E 3/ /8 35 1/ /8 35 3/ /8 35F 1/ /2 37E 3/ /2 37 1/ /2 37G 3/ /4 39F 1/ /4 39 3/ /4 39J 1-11½ ody (Inches) rass ose I.. Overall ength ex argest iameter 1/ / / / / / / / / / / / / / / / / Industrial Interchange Nipples Slevematic ouplers Male Pipe Push-ok ose arb* Saflomatic ouplers Economatic Quick onnect ouplers ody (Inches) rass Overall ength ex argest iameter 1/4 32 1/ /4 32 1/ /4 32E 3/ /8 34 1/ /8 34 3/ /8 34F 1/ /2 36E 3/ /2 36 1/ /2 36G 3/ /4 38 3/ /4 38J / NOTE: To indicate Fluorocarbon seals, add the letter Y as a suffix to the catalog number of the coupler. To indicate Ethylene Propylene seals, add the letter W as a suffix to the catalog number of the coupler. Example: 33Y or 33W ody (Inches) rass ose I.. Overall ength ex argest iameter 1/4 30-3P 1/ /4 30-5P 3/ /8 34-5P 3/ /2 36-6P 1/ * Push-ok hose barbs are designed for use with push-lok hose and do not require clamps. NOTE: To indicate Fluorocarbon seals, add the letter Y as a suffix to the catalog number of the coupler. Example: 30-3Y Repair Kits ody Nitrile Fluorocarbon Ethylene Propylene 1/4 21K 21KY 21KW 3/8 14K 14KY 14KW 1/2 16K 16KY 16KW 3/4 38K 38KY 38KW Pneumatic ivision F8 Richland, Michigan

83 Numbers & imensions escription Economatic couplings feature the tubular valve in a coupler body that interchanges with RO 210 and similar design couplers and nipples. Economatic couplings are available only in 1/4" body size, but include 3/8" thread size. Economatic couplings have brass bodies with steel sleeves and valves for durability. Standard seal material is Nitrile. Quick ouplings Economatic Quick onnect ouplings Specifications ody : 1/4" Rated Pressure: 300 psi Temperature Range (Standard Seals): -40 F to 250 F ocking evice: 4 balls ouplers Female Pipe ouplers Push-ok ose arb* ody (Inches) rass Overall ength ex argest iameter 1/4 53 1/4-18 NPTF /4 53E 3/8-18 NPTF ouplers Male Pipe ody (Inches) rass ose I.. Overall ength ex argest iameter 1/ P 1/ / P 3/ * Push-ok hose barbs are designed for use with push-lok hose and do not require clamps. hart Series (1/4" size) F Industrial Interchange Nipples Slevematic ouplers Saflomatic ouplers 30 ir in SFM /4" Economatic Quick onnect ouplers ody (Inches) rass Overall ength ex argest iameter 1/4 52 1/ /4 52E 3/ Pressure rop in PSI 100 PSI Inlet Pressure 80 PSI Inlet Pressure Pneumatic ivision F9 Richland, Michigan

84 Numbers & imensions Nipples Female Pipe Quick ouplings Economatic Quick onnect ouplings Nipples Standard ose arb E E G G F ody (Inches) Steel Overall ength Exposed ength* E ex F argest iameter G 1/4 3 1/ * This dimension represents portion of nipple that is exposed when nipple is inserted in coupler. ody (Inches) Steel ose I.. Overall ength Exposed ength* E argest iameter G 1/4 8 1/ * This dimension represents portion of nipple that is exposed when nipple is inserted in coupler. F Nipples Male Pipe E Nipples Push-ok ose arb** E Industrial Interchange Nipples Slevematic ouplers Saflomatic ouplers Economatic Quick onnect ouplers ody (Inches) Steel F G Overall ength Exposed ength* E ex F argest iameter G 1/4 2 1/ * This dimension represents portion of nipple that is exposed when nipple is inserted in coupler. ody (Inches) Steel G ose I.. Overall ength Exposed ength* E argest iameter G 1/4 8P 1/ * This dimension represents portion of nipple that is exposed when nipple is inserted in coupler. ** Push-ok barbs are designed for use with push-lok hose and do not require clamps. Pneumatic ivision F10 Richland, Michigan

85 ose & Fittings Section G G Push-on ose Fittings General Purpose ose General Purpose ose... G2 Push-on ose Fittings asic Features... G3 Numbers & imensions... G4-G6 Pneumatic ivision G1 Richland, Michigan

86 G General Purpose ose Push-on ose Fittings Pneumatic Products irline ccessories Features & imensions Push-on ose 801 Push-ok Plus The Push-ok Plus line is the most versatile general purpose hose available. It can be used in numerous applications where low-pressure media is used. Features and enefits Widest fluid compatibility and application range roadest size range (-4 through -16) ighest working pressure in all sizes in the industry onstruction Inner tube: Synthetic Rubber Reinforcement: One Fiber raid over: Synthetic Rubber, MS ccepted Temperature Petroleum base hydraulic fluids, lubricating oils, and antifreeze solutions -40 F to +257 F (-40 to +125 ) Water, water / oil emulsion, and water / glycol fluids up to +185 F (+85 ) ir up to +158 F (+70 ) Water Service Water, water/oil emulsion, and water/glycol hydraulic fluids up to +185 F (+85 ). ir up to +158 F (+70 ). imensions & Specifications ose & Fittings General Purpose ose Fitting Recommendations Use only with Push on ose Fittings and Quick ouplers with Push lock ose arb. Note: Push-ok hose is recommended for vacuum applications but not for cooling lines in air conditioners and heat pumps, nor for hydraulic applications where extreme pulsations are encountered. Push-ok is not recommended for any fuel. Nomenclature numbers are constructed from symbols that identify the style and size of the hose. Numbers identify the hose l.. in 1/16 s of an inch. Example: 801 Series 1/4" I.. (4/16) olor ength Note: GRN-R Not vailable GR R vailable over olors GR = gray U = blue RE = red GRN = green YE = yellow K = black ose ength ose Type I.. Reel ength* /4" 600 feet /8" 450 feet /2" 300 feet /8" 250 feet /4" 200 feet " 200 feet * General reels have no more than 3 lengths per reel, each no less than 20 feet. # kg g ose I.. ose O.. Working Pressure urst Pressure Minimum end Radius Weight Vacuum Rating Inch mm Inch mm PSI MPa PSI MPa Inch mm lbs/ft kg/m Inches of g kpa /4 6, , ,8 2-1/ / , , /2 12, , , / , , / , , , , Pneumatic ivision G2 Richland, Michigan

87 asic Features ose & Fittings Push-on ose Fittings dvantages Push on ose Fittings are machined from the highest quality brass or stainless steel. The barbs are specifically engineered to work in conjunction with the l.. and braid angle of Push on ose, ensuring a tight connection without clamps. ssembly Push on ose Fittings are designed only for use with Push on ose. o not use with any other style or manufacturer of hose. ssembly Instructions: 1. ut hose cleanly and squarely to length. 2. ubricate hose l.. and barbs with light oil or soapy water. 3. Push the hose onto the fitting until it bottoms against the yellow stop ring. This ensures that all of the barbs are engaged with the hose and will also help keep the end of the hose from fraying. 4.! UTION: Use of clamps may damage sealing integrity of ose and Fitting ssembly. Nomenclature numbers are constructed from symbols that identify the style, size and material of the fitting. Example: Male onnector Push-on Series Pipe (4/16) 1/4" Pipe ose I.. (4/16) 1/4" I.. rass Material (lank Steel) G General Purpose ose Push-on ose Fittings Temperature Range -40 F to 180 F (-40 to 82 ) imited by media through hose assembly. Pressure Range imited by hose l.. Pneumatic ivision G3 Richland, Michigan

88 Numbers & imensions ose & Fittings Push-on ose Fittings Push-on ose arb to Male Pipe # Inch ose Inch Inch mm Inch Inch mm /8 x / / /4 x / / /4 x / / /8 x / / /2 x / / /8 x / / /2 x / / /2 x / / /4 x / / /4 x / / G Push-on ose arb to Female Pipe General Purpose ose # Push-on ose Fittings Inch ose Inch Inch mm Inch Inch mm /4 x / / /8 x / / /2 x / / Push on ose arb to Male SE 45 # Inch ose Inch Inch mm Inch Inch mm /4 7/16 x / / /16 1/2 x / / /8 5/8 x / / /2 3/4 x / / Pneumatic ivision G4 Richland, Michigan

89 Numbers & imensions ose & Fittings Push-on ose Fittings Push on ose arb to Female SE JI 37 Swivel # Inch ose Inch Inch mm Inch Inch mm /4 7/16 x / / /16 1/2 x / / /8 9/16 x / * 1/2 3/4 x / / /2 3/4 x / / * 5/8 7/8 x / /8 7/8 x / /4 1 1/16 x / / *lso connects to SE Push on ose arb to Female SE 45 Swivel # G Inch ose Inch Inch mm Inch Inch mm /4 7/16 x / / General Purpose ose /16 1/2 x / / /8 5/8 x / / /2 3/4 x / / /8 7/8 x / Push-on ose Fittings /4 1 1/16 x / / Push on ose arb to Male Pipe Swivel # Inch ose Inch Inch mm Inch Inch mm /4 x / / /8 x / / * 1/2 x / / * Steel Pneumatic ivision G5 Richland, Michigan

90 Numbers & imensions ose & Fittings Push-on ose Fittings 37G82 Push-on ose arb to Female Pipe (NPSM) Swivel with Gasket # Gasket Inch ose Inch Inch mm Inch Inch mm 37G G-4 1/ / / G G-4 1/ / / G G-6 3/ / / G G-8 1/ / G G-8 1/ / G G-12 3/ / / Push on ose arb Union G General Purpose ose Push-on ose Fittings # ose Inch Inch mm / / / Pneumatic ivision G6 Richland, Michigan

91 Tubing & Fittings Section Pipe Fittings & dapters Prestolok Presolok omposite Tubing Polyethylene Tubing Nylon Tubing Polyurethane Tubing...6 Push-to-onnect, Prestolok omposite Fittings Prestolok Fittings Pipe Fittings Metric dapters Pneumatic ivision 1 Richland, Michigan

92 Tubing Prestolok omposite Prestolok Pneumatic Products irline ccessories Features & Numbers dvantages hemical resistant, flexible, low cost, eight colors, five tube sizes and choice of reel lengths. onstruction Flexible polyethylene thermoplastic tubing is extruded from high molecular weight resin for increased dimensional stability, uniformity and long-term strength. Its resistance to environmental stress crack ing greatly exceeds that of ordinar y polyethylene tubing as measured by STM -1693, (10% IGEP). pplications & pprovals Polyethylene tubing is available in black as well as seven coding colors as recom mended by the Instrument Society of merica. lack (E) tubing contains an ultra-violet inhibitor which is recommended for use in sunlit areas. Ingredients of natural and color tubing (except black) listed below meet F requirements for food contact applications. ll tubing con forms to STM -1248, Type I, lass, ategory 4, Grade E5. Temperature Range Suggested operating temperature range is -80 F to 150 F (-62 to 66 ). Fitting Recommendation rass fittings Nomenclature numbers are constructed from symbols that identify the style and size of the fitting. etters identify style and material. Numbers identify size in 1/16 s of an inch. Tubing & Fittings Polyethylene Tubing E Instrument Grade Tubing Number olor O.. I.. Wall Reel ength Feet Working Pressure psi at 73 F Min. urst psi at 73 F Min. end Radius Inches Weight Per 100 Feet E Natural 1/ E Natural 1/ E Natural 1/ E lack 1/ E lack 1/ E lack 1/ E-43-R-0100 Red 1/ E-43-R-0500 Red 1/ E lue 1/ E lue 1/ E-43-O-0500 Orange 1/ E-43-Y-0500 Yellow 1/ E-43-P-0500 Purple 1/ E-43-G-0500 Green 1/ E Natural 5/ /8 2.1 E lack 5/ /8 2.1 E Natural 3/ /4 2.5 E Natural 3/ /4 2.5 E lack 3/ /4 2.5 E lack 3/ /4 2.5 E-64-R-0500 Red 3/ /4 2.5 E lue 3/ /4 2.5 E-64-O-0500 Orange 3/ /4 2.5 E-64-Y-0500 Yellow 3/ /4 2.5 E-64-P-0500 Purple 3/ /4 2.5 E-64-G-0500 Green 3/ /4 2.5 E Natural 1/ /2 3.6 E lack 1/ /2 3.6 E Natural 5/ E lack 5/ oil Pipe Fittings & dapters Example: E Y Polyethylene 3/8" (6/16) Tube O.. 1/4" (4/16) Tube I.. olor, Yellow Reel Footage Pneumatic ivision 2 Richland, Michigan

93 Features & Numbers Tubing & Fittings Polyethylene Tubing PEFR Flame Resistant Tubing Number olor O.. I.. Wall Reel ength Feet Working Pressure psi at 73 F Min. urst psi at 73 F Min. end Radius Inches Weight Per 100 Feet PEFR lack 5/ /2.56 PEFR lack 1/ / PEFR lack 1/ / PEFR lack 3/ / PEFR lack 1/ / onstruction & pprovals Flame resistant polyethylene is manu factured from a distinctively formulated compound which meets the U94 V-2 flame classification. It also meets the flame spread, fuel contribution and smoke density requirements of the STM E84-81a tunnel test. pplications Parker series PEFR tubing is the preferred product for pneumatic con trol applications in the heating - ventilating - air conditioning - energy conservation in dustry. It is also suitable for use in petrochemical plants, petroleum refineries, pulp and paper mills, mines, steel mills and other industries where protection against intermittent flame and hot sparks is necessary. Temperature Range Suggested operating temperature range is -85 F to 150 F (-65 to +66 ). Tubing Presolok omposite Nomenclature Order by tubing part number and name. Example: Polyethylene Flame Resistant 1/4" (4/16) Tube O.. Reel Footage PE FR Prestolok Pipe Fittings & dapters Pneumatic ivision 3 Richland, Michigan

94 Features & Numbers Tubing & Fittings Nylon Tubing N Tubing Prestolok omposite Prestolok Pipe Fittings & dapters dvantages Flexible nylon tubing is carefully made from high-grade, abrasion-resistant, heatand light-stabilized nylon. Resistance to stress -cracking greatly exceeds that of ordinary nylon tubing. Extremely low level water absorption. hemical-resistant nylon tubing has the additional benefits of better flexibility, lighter weight and resistance to flexural fatigue. olors vailable in natural (NN) and black (N). lack tubing is recommended for use outdoors and in sunlit areas. Temperature Range Operating temperatures, depending upon conditions, are -65 F to 200 F (-54 to 93 ) continuous. Fitting Recommendations rass fittings Nomenclature Order by tubing part number and name. Example: Nylon olor Natural N N /8" (2/16) Tube O.. Wall Thickness (in thousandths of an inch) N Flexible Tubing Nylon olor Nom. Tube O.. Nom. Tube I.. verage Wall Thick. *Min. urst Pressure at 73 F psi Min. end Radius Inches Std. Reel ength Feet NN Natural 1/ /4 250 N lack 1/ /4 250 NN Natural 1/ /4 250 N lack 1/ /4 250 NN Natural 5/ /2 250 N lack 5/ /2 250 NN Natural 3/ /8 250 N lack 3/ /8 250 NN Natural 3/ / N lack 3/ / NN Natural 1/ /8 250 N lack 1/ /8 250 NN Natural 1/ /8 250 N lack 1/ /8 250 NN Natural 1/ /2 250 N lack 1/ /2 250 NN Natural 5/ /8 250 N lack 5/ /8 250 NN Natural 3/ /8 250 N lack 3/ /8 250 NN Natural 3/ /4 250 N lack 3/ /4 250 NN Natural 1/ /4 250 N lack 1/ /4 250 NN Natural 1/ N lack 1/ *Suggested working pressure is 1/4 of burst pressure. Pneumatic ivision 4 Richland, Michigan

95 Features & Numbers Tubing & Fittings Nylon Tubing NR dvantages Series NR semi-rigid nylon tubing offers better chemical resistance than series N, good resistance to high ambient temperature and low moisture absorption. NR has a high tensile strength which will give excellent coupling retention in high pressure, temperature and vibration environments. onstruction Parker series NR tubing is manu factured from a semi-rigid nylon II material. The tubing does not contain plasticizers. pplications & pprovals NR tubing is specified for machine tool lubricating systems, marine control systems, process lines for chemicals and oils and other applications requiring a high quality nylon tube. Temperature Range The recommended operating temperature range for service at rated pressures with compatible fluids is -60 F to 200 F (-51 to 93 ). Fitting Recommendations rass fittings Nomenclature Order by tubing part number and name. Example: N R Nylon olor, lack Rigid 1/8" (2/16) Tube O.. Wall Thickness (in thousandths of an inch) NR Semi-rigid igh Strength Tubing Nylon olor Nom. Tube O.. Nom. Tube I.. verage Wall Thick. *Min. urst Pressure at 73 F psi Min. end Radius Inches Std. Reel ength Feet NNR Natural 1/ /2 500 NR lack 1/ /2 500 NNR Natural 1/ /8 500 NR lack 1/ /8 500 NNR Natural 3/ /4 500 NR lack 3/ /4 500 NNR Natural 3/ /8 500 NR lack 3/ /8 500 NNR Natural 1/ NR lack 1/ NNR Natural 1/ /8 250 NR lack 1/ /8 250 NNR Natural 5/ /2 250 NR lack 5/ /2 250 NNR Natural 3/ /4 250 NR lack 3/ /4 250 NNR Natural 3/ /2 250 NR lack 3/ /2 250 NNR Natural 1/ /8 250 NR lack 1/ /8 250 NNR Natural 1/ /2 250 NR lack 1/ /2 250 *Suggested working pressure is 1/4 of burst pressure. PT Plastic Tube utter PT-001 n easy to handle razor/edged tube cutter, closes automatically, assuring clean and square cuts. May be used with polyethylene, polypropylene, nylon and other plastic tubing. ow To Use Insert plastic tube to desired length, allow tube cutter to close, then apply pressure until tube snaps off. Tubing Presolok omposite Prestolok Pipe Fittings & dapters Pneumatic ivision 5 Richland, Michigan

96 Features & Numbers Tubing & Fittings Polyurethane Tubing Fitting Recommendations Thermoplastic fittings rass fittings Nomenclature Order by tubing part number and name. Tubing Prestolok omposite Prestolok Pipe Fittings & dapters dvantages Polyurethane tubing is a high quality, precision-made tubing used in a wide range of demanding and critical applications. Polyether based, polyurethane tubing occupies a unique position among polymers, sharing the best properties of both rubber and plastic. Urethane exhibits the elongation and recovery characteristics of rubber and the chemical resistance associated with plastics. The tubing is tough, strong, kink -resistant and abrasion resistant, yet it s flexible and easy to assemble onto desig nated fittings. Tough Flexible road Temperature Range Eight olors brasion Resistant hemical Resistant pplications & pprovals Polyurethane tubing is used for a wide variety of applications. Typical usage includes air tools, robotics, pneumatic logic and actuation systems, analytical instru mentation, vacuum equipment, pressure measurement apparatus, semiconductor equipment manufacturers and a variety of medical and laboratory applications. Temperature Range Suggested operating temperatures, depending upon conditions are 0 F to 200 F (-18 to 93 ). Example: U K Polyurethane 1/8" (2/16) Tube O.. 1/6" (1/16) Tube I.. olor - lack Reel ength in Feet U Polyether ase Tubing Nom. Tube O.. Nom. Tube I.. Wall Thick. Working** Pressure (PSI) urst Pressure (PSI) Reel ength Feet 500 * U-21-xxx-0500 U-21-xxx /8 1/16 1/ U-42-xxx /4 1/8 1/ U-42-xxx U-64-xxx-0250 U-64-xxx-0100 U-86-xxx-0250 U-86-xxx /8 1/4 1/ /2 3/8 1/ (coil) (coil) * xxx = olors: lear-lank, lack-k, Green-GRN, Red-RE, Yellow-YE, lue-u, Orange- ORG, Gray-GR ** ased on a full 4:1 safety factor. Pneumatic ivision 6 Richland, Michigan

97 Notes Tubing & Fittings Pipe Fittings & dapters Prestolok Presolok omposite Tubing Pneumatic ivision 7 Richland, Michigan

98 Product Index Tubing & Fittings Push-to-onnect, Prestolok omposite Tube to Male NPTF W369PP Male Elbow W369PPX Extended Male Elbow W379PP Male Elbow 45 W372PP ranch Tee Swivel W371PP Male Run Tee Swivel Page 11 Page 12 Page 12 Page 13 Page 14 W68PPSP Male Standpipe W368PP Male Y onnector 32PP Equal Union 365PP Union Elbow 364PP Union Tee Tube to Tube Page 15 Page 15 Page 17 Page 17 Page PP Union Y onnector 362PP ouble Y onnector 24PP Multiple Tee 24PP ouble Multiple Tee 347PP Equal ross 32PPR onnector for 2 Tubes Page 16 Page 19 Page 19 Page 20 Page 20 Page 24 32PPR onnector for 3 Tubes Tube to Female NPTF 377PP Female ranch Tee Swivel 370PP Female Elbow Swivel Page 24 Page 13 Page 16 ulkhead Unions 32PP ulkhead Union 365PP Equal ulkhead Elbow Plug-Ins 369PPSP Plug-In Elbow 369PPSPX Extended Plug-In Elbow Tubing Prestolok omposite 379PPSP 45 Plug-In Elbow Page PPSP Plug-In ranch Tee 371PPSP Plug-In Run Tee Page PPSP Plug-In Y Page 20 67PP Tube End Reducer 32PPSP Tube Expander Page 21 Prestolok Page PPSP arbed onnector Page 21 Page 21 63PP ouble Male Union 639PP Plug Page 22 Page 23 Page 23 Pipe Fittings & dapters Page 24 uxiliary omponents Page 22 Page 24 Metric Tube to Male NPTF W369PP Male Elbow W372PP Male ranch Tee Swivel Page 11 Page 13 Pneumatic ivision 8 Richland, Michigan

99 Product Index Tubing & Fittings Push-to-onnect, Prestolok omposite Metric Tube to Metric Tube 32PP Union 365PP Union Elbow 364PP Union Tee 362PP Union Y onnector 362PP ouble Y onnector Page 17 Page 17 Page 18 Page 22 Page 19 24PP Multiple Tee 24PP ouble Multiple Tee 347PP ross 32PPR onnector for 2 Tubes 32PPR onnector for 3 Tubes Page 19 Page 20 Page 20 Page 24 Page 24 Metric ukhead Unions 32PP ulkhead Union 365PP Equal ulkhead Elbow Metric Tube to Female SPP 370PP Female Elbow Page 19 Page 19 Page PP Male Elbow 369PPX Male Elbow 379PP 45 Male Elbow 372PP Male ranch Tee 371PP Male Run Tee Metric Tube to Male SPP Page 11 Page 12 Page 12 Page 13 Page 14 68PPSP Male Standpipe 368PP Male Y onnector 368PP ouble Y Male onnector Metric Tube to Metric Straight 369PP Male Elbow 369PPX Male Elbow 379PP 45 Male Elbow Page 15 Page PP Male ranch Tee 371PP Male Run Tee Page 16 68PPSP Male Standpipe Page PP Male Y onnector Page 12 Tubing Presolok omposite Metric Plug-Ins Page PPSP Plug-In Elbow Page 13 Page 20 Page PPXSP Extended Plug-In Elbow Page 21 Page PPSP 45 Plug-In Elbow Page 21 Page PPSP Plug-In ranch Tee Page PPSP Plug-In Run Tee Page 22 Prestolok Pipe Fittings & dapters 362PPSP Plug-In Y 362PPSP Plug-In Multiple Y 67PP Tube End Reducer 32PPSP Tube Expander 322PPSP arbed onnector Page 22 Page 22 Page 23 Page 23 Page 24 Pneumatic ivision 9 Richland, Michigan

100 Features Tubing & Fittings Prestolok omposite Fittings Materials of onstruction ody: ollar: Gripping Ring: Seal: O-Rings: ase: Glass reinforced nylon 6.6 Nylon Stainless Steel Nitrile Nitrile Nickel plated brass with thread sealant on tapered components and captive seal on parallel threads. Nomenclature Example: W369PP-4-2 ttribute: Tubing Prestolok omposite Prestolok w Tube O..: Tube O.. : White Sealant 3 composite body 69 male elbow PP Prestolok 4 1/4" (4/16) Tube O.. 2 1/8" (2/16) Pipe Pressure and Temperature Range Gripping Ring: ollet Technology: Vacuum apability: -4 F to +175 F at up to 290 PSI depending on tubing +5 F to +155 F at up to 260 PSI depending on tubing 28" g pplicable Tube 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2 3, 4, 6, 8, 10, 12, 14 compact one piece push-to-connect fitting. ll items in the Prestolok composite range are silicone free. The stainless steel gripping ring ensures excellent tube retention while the seal within the fitting provides a positive seal on the O.. of the tube, in both static and dynamic positions, due to an optimized design of the fitting cavity. Prestolok composite should not be used for live swivel applications. Recommended Tubing Prestolok composite fittings are designed to be used with the following tubing. Nylon Semi-Rigid Polyurethane Nylon Fluoropolymer ssembly Instructions 1. chieve a square cut edge with a tube cutter 2. Simply push the tubing until it can go no further. olding and sealing is accomplished instantaneously. 3. Pull on the tubing to verify gripping action 4. To disassemble make sure there is no air flow 5. epress the manual push button, then pull the tube out. Pipe Fittings & dapters Pneumatic ivision 10 Richland, Michigan

101 Numbers Tubing & Fittings Prestolok omposite Fittings W369PP Male Elbow Swivel 90 Tube (In.) NPT / UNF ex 369PP-2-0 1/ W369PP-2-1 1/8 1/ W369PP-2-2 1/8 1/ W369PP-2-4 1/8 1/ PP-5/32-0 5/ W369PP-5/32-2 5/32 1/ W369PP-5/32-4 5/32 1/ W369PP-3-2 3/16 1/ PP-4-0 1/ W369PP-4-2 1/4 1/ W369PP-4-4 1/4 1/ W369PP-4-6 1/4 3/ W369PP-5-2 5/16 1/ W369PP-5-4 5/16 1/ W369PP-5-6 5/16 3/ W369PP-6-2 3/8 1/ W369PP-6-4 3/8 1/ W369PP-6-6 3/8 3/ W369PP-6-8 3/8 1/ W369PP-8-4 1/2 1/ W369PP-8-6 1/2 3/ W369PP-8-8 1/2 1/ W369PP Male Elbow Tube NPT ex W369PP-4M-2 4 1/ W369PP-4M-4 4 1/ W369PP-6M-2 6 1/ W369PP-6M-4 6 1/ W369PP-8M-2 8 1/ W369PP-8M-4 8 1/ W369PP-8M-6 8 3/ W369PP-10M / W369PP-10M / W369PP-10M / W369PP-12M / W369PP-12M / ex ex 369PP Male Elbow - SPP Tube SPP / Metric ex 369PP-3M-M3 3 M3x PP-3M-M5 3 M5x PP-4M-M3 4 M3x PP-4M-M5 4 M5x PP-4M-M7 4 M7x PP-4M-2G 4 1/ PP-4M-4G 4 1/ PP-6M-M5 6 M5x PP-6M-M7 6 M7x PP-6M-M10 6 M10x PP-6M-M12 6 M12x PP-6M-2G 6 1/ PP-6M-4G 6 1/ PP-6M-6G 6 3/ PP-6M-8G 6 1/ PP-8M-M10 8 M10x PP-8M-M12 8 M12x PP-8M-2G 8 1/ PP-8M-4G 8 1/ PP-8M-6G 8 3/ PP-8M-8G 8 1/ PP-10M-4G 10 1/ PP-10M-6G 10 3/ PP-10M-8G 10 1/ PP-12M-4G 12 1/ PP-12M-6G 12 3/ PP-12M-8G 12 1/ PP-14M-6G 14 3/ PP-14M-8G 14 1/ ex Tubing Presolok omposite Prestolok Pipe Fittings & dapters Pneumatic ivision 11 Richland, Michigan

102 Numbers Tubing & Fittings Prestolok omposite Fittings W369PPX Extended Male Elbow ex W379PP Male Elbow 45 ex Tube (In.) NPT / UNF ex Tube (In.) NPT / UNF ex 369PPX-2-0 1/ W369PPX-2-2 1/8 1/ W369PPX-2-4 1/8 1/ PPX-5/32-0 5/ W369PPX-5/32-2 5/32 1/ W369PPX-5/32-4 5/32 1/ PPX-4-0 1/ PPX-4-M7 1/4 M W369PPX-4-2 1/4 1/ W369PPX-4-4 1/4 1/ W369PPX-4-6 1/4 3/ W369PPX-5-2 5/16 1/ W369PPX-5-4 5/16 1/ W369PPX-6-2 3/8 1/ W369PPX-6-4 3/8 1/ W369PPX-6-6 3/8 3/ PP-2-0 1/ W379PP-2-2 1/8 1/ W379PP-4-2 1/4 1/ W379PP-4-4 1/4 1/ W379PP-4-M7 1/4 M W379PP-6-4 3/8 1/ W379PP-6-6 3/8 3/ PP 45 Male Elbow - SPP Tube SPP / M5 ex ex Tubing Prestolok omposite Prestolok Pipe Fittings & dapters 369PPX Male Elbow - SPP Tube SPP / Metric ex 369PPX-4M-M5 4 M5x PPX-4M-M7 4 M7x PPX-4M-2G 4 1/ PPX-4M-4G 4 1/ PPX-6M-M5 6 M5x PPX-6M-M7 6 M7x PPX-6M-2G 6 1/ PPX-6M-4G 6 1/ PPX-8M-2G 8 1/ PPX-8M-4G 8 1/ PPX-8M-6G 8 3/ PPX-10M-4G 10 1/ PPX-10M-6G 10 3/ PPX-10M-8G 10 1/ PPX-12M-4G 12 1/ PPX-12M-6G 12 3/ PPX-12M-8G 12 1/ PPX-14M-6G 14 3/ PPX-14M-8G 14 1/ ex 379PP-4M-M5 4 M5x PP-4M-2G 4 1/ PP-6M-M5 6 M5x PP-6M-2G 6 1/ PP-6M-4G 6 1/ PP-8M-2G 8 1/ PP-8M-4G 8 1/ PP-8M-6G 8 3/ PP-10M-4G 10 1/ PP-10M-6G 10 3/ PP-10M-8G 10 1/ PP-12M-4G 12 1/ PP-12M-6G 12 3/ PP-12M-8G 12 1/ Pneumatic ivision 12 Richland, Michigan

103 Numbers Tubing & Fittings Prestolok omposite Fittings ex ex W372PP Male ranch Tee Swivel 372PP Male ranch Tee - SPP Tube (In.) NPT / UNF ex /2 Tube SPP / M5 ex /2 372PP-2-0 1/ W372PP-2-1 1/8 1/ W372PP-2-2 1/8 1/ W372PP-2-4 1/8 1/ PP-5/32-0 5/ W372PP-5/32-2 5/32 1/ W372PP-5/32-4 5/32 1/ W372PP-3-2 3/16 1/ W372PP-4-2 1/4 1/ W372PP-4-4 1/4 1/ W372PP-4-6 1/4 3/ W372PP-5-2 5/16 1/ W372PP-5-4 5/16 1/ W372PP-5-6 5/16 3/ W372PP-6-2 3/8 1/ W372PP-6-4 3/8 1/ W372PP-6-6 3/8 3/ W372PP-6-8 3/8 1/ W372PP-8-4 1/2 1/ W372PP-8-6 1/2 3/ W372PP-8-8 1/2 1/ PP-4M-M5 4 M5x PP-4M-2G 4 1/ PP-4M-4G 4 1/ PP-6M-M5 6 M5x PP-6M-2G 6 1/ PP-6M-4G 6 1/ PP-8M-2G 8 1/ PP-8M-4G 8 1/ PP-8M-6G 8 3/ PP-10M-4G 10 1/ PP-10M-6G 10 3/ PP-10M-8G 10 1/ PP-12M-4G 12 1/ PP-12M-6G 12 3/ PP-12M-8G 12 1/ PP-14M-6G 14 3/ PP-14M-8G 14 1/ W372PP Male ranch Tee - SPP Tube NPT ex /2 W372PP-4M-2 4 1/ W372PP-4M-4 4 1/ W372PP-6M-2 6 1/ W372PP-6M-4 6 1/ W372PP-8M-2 8 1/ W372PP-8M-4 8 1/ W372PP-8M-6 8 3/ W372PP-10M / W372PP-10M / W372PP-10M / W372PP-12M / W372PP-12M / ex 377PP Female ranch Tee Swivel Tube (In.) NPT / UNF ex /2 377PP-2-2 1/8 1/ PP-5/32-2 5/32 1/ PP-5/32-4 5/32 1/ PP-4-2 1/4 1/ PP-4-4 1/4 1/ PP-5-2 5/16 1/ PP-5-4 5/16 1/ PP-6-4 3/8 1/ PP-8-6 1/2 3/ ex Tubing Presolok omposite Prestolok Pipe Fittings & dapters Pneumatic ivision 13 Richland, Michigan

104 Numbers Tubing & Fittings Prestolok omposite Fittings 1 ex 1 ex W371PP Male Run Tee Swivel 371PP Male Run Tee - SPP Tube (In.) NPT / UNF ex 1 Tube SPP / M5 ex 1 371PP-2-0 1/ W371PP-2-1 1/8 1/ W371PP-2-2 1/8 1/ PP-5/32-0 5/ W371PP-5/32-2 5/32 1/ W371PP-5/32-4 5/32 1/ W371PP-3-2 3/16 1/ W371PP-4-2 1/4 1/ W371PP-4-4 1/4 1/ W371PP-4-6 1/4 3/ W371PP-5-2 5/16 1/ W371PP-5-4 5/16 1/ W371PP-5-6 5/16 3/ W371PP-6-2 3/8 1/ W371PP-6-4 3/8 1/ W371PP-6-6 3/8 3/ W371PP-6-8 3/8 1/ W371PP-8-4 1/2 1/ W371PP-8-6 1/2 3/ W371PP-8-8 1/2 1/ PP-4M-M5 4 M5x PP-4M-2G 4 1/ PP-4M-4G 4 1/ PP-6M-M5 6 M5x PP-6M-2G 6 1/ PP-6M-4G 6 1/ PP-8M-2G 8 1/ PP-8M-4G 8 1/ PP-8M-6G 8 3/ PP-10M-4G 10 1/ PP-10M-6G 10 3/ PP-10M-8G 10 1/ PP-12M-4G 12 1/ PP-12M-6G 12 3/ PP-12M-8G 12 1/ PP-14M-6G 14 3/ PP-14M-8G 14 1/ Tubing Prestolok omposite Prestolok Pipe Fittings & dapters Pneumatic ivision 14 Richland, Michigan

105 Numbers Tubing & Fittings Prestolok omposite Fittings 1 ex N W68PPSP Male Standpipe ex Tube (In.) NPT / UNF ex 1 W368PP Male Y onnector 68PPSP-5/32-0 5/ W68PPSP-5/32-2 5/32 1/ W68PPSP-5/32-4 5/32 1/ W68PPSP-4-2 1/4 1/ W68PPSP-4-4 1/4 1/ W68PPSP-5-2 5/16 1/ W68PPSP-5-4 5/16 1/ W68PPSP-6-2 3/8 1/ Tube (In.) NPT ex N W368PP-5/32-2 5/32 1/ W368PP-5/32-4 5/32 1/ W368PP-4-2 1/4 1/ W368PP-4-4 1/4 1/ W368PP-6-4 3/8 1/ W368PP-6-6 3/8 3/ W68PPSP-6-4 3/8 1/ W68PPSP-6-6 3/8 3/ W68PPSP-8-6 1/2 3/ W68PPSP-8-8 1/2 1/ PPSP Male Standpipe - SPP 1 ex 368PP Male Y onnector - SPP ex N Tube SPT ex 68PPSP-4M-M5 4 M5x Tube SPP / M5 ex N 368PP-4M-M5 4 M5x Tubing 68PPSP-4M-2G 4 1/ PP-4M-2G 4 1/ PPSP-4M-4G 4 1/ PPSP-6M-2G 6 1/ PPSP-6M-4G 6 1/ PP-4M-4G 4 1/ PP-6M-M5 6 M5x PP-6M-2G 6 1/ Presolok omposite 68PPSP-8M-2G 8 1/ PP-6M-4G 6 1/ PPSP-8M-4G 8 1/ PPSP-8M-6G 8 3/ PPSP-10M-4G 10 1/ PP-8M-2G 8 1/ PP-8M-4G 8 1/ PP-8M-6G 8 3/ Prestolok 68PPSP-10M-6G 10 3/ PPSP-10M-8G 10 1/ PPSP-12M-6G 12 3/ PPSP-12M-8G 12 1/ PP-10M-4G 10 1/ PP-10M-6G 10 3/ PP-10M-8G 10 1/ PP-12M-6G 12 3/ Pipe Fittings & dapters 68PPSP-14M-6G 14 3/ PP-12M-8G 12 1/ PPSP-14M-8G 14 1/ Pneumatic ivision 15 Richland, Michigan

106 Numbers Tubing & Fittings Prestolok omposite Fittings ex 370PP Female Elbow - SPP ex Tube SPP ex 368PP ouble Y Male onnector - SPP Tube SPP ex M N Mounting ole ia. 368PP-4M-2G 4 1/ PP-4M-4G 4 1/ PP-6M-2G 6 1/ PP-6M-4G 6 1/ PP-4M-2G 4 1/ PP-4M-4G 4 1/ PP-6M-2G 6 1/ PP-6M-4G 6 1/ PP-8M-2G 8 1/ PP-8M-4G 8 1/ PP-8M-6G 8 3/ PP-10M-4G 10 1/ PP-10M-6G 10 3/ PP-10M-8G 10 1/ PP-12M-4G 12 1/ PP-12M-6G 12 3/ PP-12M-8G 12 1/ Tubing Prestolok omposite 370PP Female Elbow Swivel Tube (In.) NPT ex 370PP-2-2 1/8 1/ PP-5/32-2 5/32 1/ PP-5/32-4 5/32 1/ PP-4-2 1/4 1/ PP-4-4 1/4 1/ PP-5-2 5/16 1/ PP-5-4 5/16 1/ PP-6-4 3/8 1/ PP-8-6 1/2 3/ ex Prestolok Pipe Fittings & dapters Pneumatic ivision 16 Richland, Michigan

107 Numbers Tubing & Fittings Prestolok omposite Fittings 32PP Equal Union Tube In.) 32PP-2 1/ PP-5/32 5/ PP-3 3/ PP-4 1/ PP-5 5/ PP-6 3/ PP-8 1/ PP onverter Tube (In.) Tube l 32PP-6M-4 1/ PP-10M-6 3/ PP-12M-8 1/ PP Unequal Union 1 Tube (In.) 2 Tube (In.) 32PP-5/32-2 5/32 1/ PP-5/32-4 5/32 1/ PP-4-2 1/4 1/ PP-5-4 5/16 1/ PP-6-4 3/8 1/ PP-6-8 3/8 1/ PP Union Elbow Tube (In.) 365PP-2 1/ PP-5/32 5/ PP-3 3/ PP-4 1/ PP-5 5/ PP-6 3/ PP-8 1/ PP Union Tube 32PP-3M PP-4M PP-6M PP-8M PP-10M PP-12M PP-14M PP Unequal Union 1 Tube (In.) 2 Tube (In.) 365PP-2-4 1/8 1/ PP-5/32-4 5/32 1/ PP-6-4 3/8 1/ PP-6-8 3/8 1/ Tubing Presolok omposite 32PP Unequal Union 1 Tube 2 Tube 32PP-3M-4M PP-6M-4M PP-8M-4M PP-8M-6M PP-10M-6M PP-10M-8M PP-12M-10M PP-12M-14M PP-12M-8M PP Union Elbow Tube 365PP-4M PP-6M PP-8M PP-10M PP-12M PP-14M Prestolok Pipe Fittings & dapters Pneumatic ivision 17 Richland, Michigan

108 Numbers Tubing & Fittings Prestolok omposite Fittings 1 365PP Unequal Union Elbow 1 Tube 2 Tube 365PP-4M-6M PP-6M-8M PP-8M-10M PP-10M-12M PP Union Tee Tube (In.) /2 364PP-2 1/ PP-5/32 5/ PP-3 3/ PP-4 1/ PP-5 5/ PP-6 3/ PP-8 1/ PP Unequal Union Tee 1 Tube 2 Tube /2 364PP-4M-6M PP-6M-4M PP-6M-8M PP-8M-6M PP-8M-10M PP-10M-12M PP-10M-8M PP-12M-10M PP-14M-8M PP Union Y onnector 1 Tube (In.) 2 Tube (In.) 2 K N 1 N Tubing Prestolok omposite Prestolok Pipe Fittings & dapters 364PP Unequal Union Tee 1 Tube (In.) 2 Tube (In.) /2 364PP-2-4 1/8 1/ PP-5/32-4 5/32 1/ PP-4-2 1/4 1/ PP-4-5/32 1/4 5/ PP-4-6 1/4 3/ PP-6-4 3/8 1/ PP-6-8 3/8 1/ PP-8-4 1/2 1/ PP-8-6 1/2 3/ PP Union Tee Tube /2 364PP-3M PP-4M PP-6M PP-8M PP-10M PP-12M PP-14M PP-2 1/8 1/ PP-2-4 1/8 1/ PP-5/32 5/32 5/ PP-5/32-4 5/32 1/ PP-4 1/4 1/ PP-4-6 1/4 3/ PP-5 5/16 5/ PP-6 3/8 3/ PP Union Y onnector 1 Tube 2 Tube (m) N 362PP-4M PP-6M PP-8M PP-10M PP-12M PP-4M-6M PP-6M-8M PP-8M-10M PP-10M-12M K N Pneumatic ivision 18 Richland, Michigan

109 M Pneumatic Products irline ccessories Numbers Tubing & Fittings Prestolok omposite Fittings 1 2 M ex 2 N ex 1 K 362PP ouble Y onnector 1 Tube 2 Tube (In.) (In.) M N Mounting ole ia. 362PP-5/32 5/32 5/ PP-5/32-4 5/32 1/ PP Equal ulkhead Elbow Tube (In.) 1 ex 2 ex K Max 365PP-2 1/ PP-5/32 5/ PP-4 1/ PP-5 5/ PP-6 3/ PP-8 1/ N 362PP ouble Y onnector 1 Tube 2 Tube M N Mounting ole ia. 362PP-4M PP-6M PP-4M-6M PP-6M-8M PP ulkhead Union Tube (In.) ex K Max 1 ex 32PP-2 1/ PP-5/32 5/ PP-4 1/ PP-5 5/ PP-6 3/ PP-8 1/ K K PP Equal ulkhead Elbow Tube 1 ex 2 ex K Max 365PP-4M PP-6M PP-8M PP-10M PP-12M PP Multiple Tee 1 Tube (In.) 2 Tube (In.) M N Mounting ole ia. 24PP-4-5/32 1/4 5/ PP-4-4 1/4 1/ PP-5-5/32 5/16 5/ PP-6-4 3/8 1/ ex 1 2 N M 2 2 N K ex 2 1 Tubing Presolok omposite Prestolok 32PP ulkhead Union Tube ex K Max ex 32PP-4M PP-6M PP-8M PP-10M PP-12M PP-14M PP Multiple Tee 1 Tube 2 Tube N Mounting ole ia. 24PP-6M-4M PP-8M-4M PP-8M-6M PP-10M-6M PP-10M-8M N 2 2 N 1 Pipe Fittings & dapters Pneumatic ivision 19 Richland, Michigan

110 Numbers Tubing & Fittings Prestolok omposite Fittings 24PP ouble Multiple Tee 1 Tube (In.) 2 Tube (In.) M N Mounting ole ia. 24PP-4-5/32 1/4 5/ PP-4-4 1/4 1/ PP-5-5/32 5/16 5/ PP-6-4 3/8 1/ N N M 347PP Unequal ross 1 Tube 2 Tube Mounting ole ia. 347PP-4M-6M PP-6M-8M PP-4M-6M PP-6M-8M PP ouble Multiple Tee 1 Tube 2 Tube M N Mounting ole ia. 24PP-6M-4M PP-8M-4M PP-8M-6M PP-10M-6M PP-10M-8M N N M 369PPSP Plug-In Elbow 1 Tube (In.) 2 Tube (In.) PPSP-2 1/8 1/ PPSP-5/32 5/32 5/ PPSP-5/32-4 5/32 1/ PPSP-4 1/4 1/ PPSP-4-6 1/4 3/ PPSP-5 5/16 5/ PPSP-6 3/8 3/ PPSP-8 1/2 1/ Tubing Prestolok omposite Prestolok Pipe Fittings & dapters 347PP Equal ross Tube (In.) Mounting ole ia. 347PP-5/32 5/ PP-4 1/ PP-5 5/ PPSP Plug-In Elbow 1 Tube 2 Tube PPSP-4M PPSP-6M PPSP-8M PPSP-10M PPSP-12M PPSP-4M-6M PPSP-6M-4M PPSP-6M-8M PPSP-8M-10M PPSP-10M-12M PP Equal ross Tube Mounting ole ia. 347PP-4M PP-6M PP-8M Pneumatic ivision 20 Richland, Michigan

111 Numbers Tubing & Fittings Prestolok omposite Fittings PPSPX Extended Plug-In Elbow 1 Tube (In.) 2 Tube (In.) PPSPX-2 1/8 1/ PPSPX-5/32 5/32 5/ PPSPX-4 1/4 1/ PPSPX-5 5/16 5/ PPSPX-6 3/8 3/ PPSP Plug-In ranch Tee 1 Tube (In.) 2 Tube (In.) 1 2 /2 372PPSP-2 1/8 1/ PPSP-5/32 5/32 5/ PPSP-4 1/4 1/ PPSP-5 5/16 5/ PPSP-6 3/8 3/ PPSP-8 1/2 1/ PPXSP Extended Plug-In Elbow 1 Tube 2 Tube PPXSP-4M PPXSP-6M PPXSP-8M PPXSP-10M PPXSP-12M PPXSP-4M-6M PPXSP-6M-8M PPXSP-8M-10M PPXSP-10M-12M PPSP 45 Plug-In Elbow 1 Tube (In.) 2 Tube (In.) PPSP-2 1/8 1/ PPSP-5/32 5/32 5/ PPSP-4 1/4 1/ PPSP-5 5/16 5/ PPSP-6 3/8 3/ PPSP 45 Plug-In Elbow 1 Tube 2 Tube PPSP-4M PPSP-6M PPSP-8M PPSP-10M PPSP-12M PPSP Plug-In ranch Tee 1 Tube 2 Tube 1 2 /2 372PPSP-4M PPSP-6M PPSP-8M PPSP-10M PPSP-12M PPSP-4M-6M PPSP-6M-8M PPSP-8M-10M PPSP-10M-12M PPSP Plug-In Run Tee 1 Tube (In.) 2 Tube (In.) PPSP-5/32 5/32 5/ PPSP-4 1/4 1/ PPSP-5 5/16 5/ PPSP-6 3/8 3/ PPSP-8 1/2 1/ Tubing Presolok omposite Prestolok Pipe Fittings & dapters Pneumatic ivision 21 Richland, Michigan

112 Numbers Tubing & Fittings Prestolok omposite Fittings 1 P P 1 2 N M Tubing Prestolok omposite Prestolok Pipe Fittings & dapters 371PPSP Plug-In Run Tee 362PPSP Plug-In Y 1 Tube (In.) 2 Tube (In.) 1 N 362PPSP-2 1/8 1/ PPSP-5/32 5/32 5/ PPSP-4 1/4 1/ PPSP-5 5/16 5/ PPSP-6 3/8 3/ PPSP Plug-In Y 1 Tube 1 Tube 2 Tube 2 Tube PPSP-4M PPSP-6M PPSP-8M PPSP-10M PPSP-12M PPSP-4M-6M PPSP-6M-8M PPSP-8M-10M PPSP-10m-12M N 362PPSP-4M PPSP-6M PPSP-8M PPSP-10M PPSP-12M PPSP-4M-6M PPSP-6M-8M PPSP-8M-10M PPSP-10M-12M N N 362PPSP Plug-In Multiple Y 1 Tube 2 Tube 1 M N 362PPSP-6M-4M PPSP-8M-4M PPSP-8M-6M PP ouble Male Union 63PP ouble Male Union Tube (In.) 63PP-5/32 5/ PP-4 1/ PP-5 5/ PP-6 3/ PP-8 1/ Tube 63PP4M /2 63PP6M /2 63PP8M PP10M /2 63PP12M PP14M /2 Pneumatic ivision 22 Richland, Michigan

113 Numbers Tubing & Fittings Prestolok omposite Fittings PP Tube End Reducer PPSP Tube Expander Tube (In.) 2 Tube (In.) 1 1 Tube (In.) 2 Tube (In.) 1 67PP-2-5/32 1/8 5/ PPSP-4-2 1/4 1/ PP-2-3 1/8 3/ PPSP-4-6M 1/4 6M PP-2-4 1/8 1/ PPSP-4-5/32 1/4 5/ PP-5/32-3 5/32 3/ PPSP-4-3 1/4 3/ PP-5/32-4 5/32 1/ PPSP-6-4 3/8 1/ PP-5/32-5 5/32 5/ PP-5/32-6 5/32 3/ PP-3-5 3/16 5/ PP-3-4 3/16 1/ PP-4-5 1/4 5/ PP-4-6 1/4 3/ PP-4-8 1/4 1/ PP-5-6 5/16 3/ PP-5-8 5/16 1/ PP-6-8 3/8 1/ PPSP Tube Expander Tube Tube 32PPSP-6M-4M PPSP-8M-6M PPSP-10M-8M PPSP-12M-10M PP Tube Reducer 1 Tube 2 Tube 67PP-6M-4M PPSP Tube onverter 1 Tube 2 Tube (In.) 32PPSP-4M-2 4M 1/ PP-8M-4M PPSP-8M-4 8M 1/ PP-8M-6M PP-10M-4M PP-10M-6M Tubing 67PP-10M-8M PP-12M-10M PP-12M-6M PP-12M-8M PP-14M-10M PP-14M-12M PP-14M-6M PP-14M-8M PP Plug Tube (In.) 639PP-2 1/ PP-5/32 5/ PP-3 3/ PP-4 1/ PP-5 5/ Presolok omposite Prestolok Pipe Fittings & dapters 639PP-6 3/ PP-8 1/ Pneumatic ivision 23 Richland, Michigan

114 Numbers Tubing & Fittings Prestolok omposite Fittings K 639PP Plug Tube 639PP-3M PP-4M PP-6M PP-8M PP-10M PP-12M PP-14M PPR onnector for 2 Tubes Tube (In.) K 32PPR-5/32 5/ PPR-4 1/ PPR-5 5/ K PPR onnector for 2 Tubes 322PPSP arbed onnector O 1 O 2 O 3 Ø 1 Ø PPSP-2-5/32 5/ Ø 2 Tube K 32PPR-4M PPR-6M PPR-8M N PPSP-5M-5/32 5/ PPSP-3-4 1/4 3/ PPSP-4-5 5/ PPSP-5-5 3/ N 322PPSP-5-6 3/ K Tubing Prestolok omposite Prestolok 322PPSP arbed onnector O 1 O 2 O 3 Ø PPSP-3M-4M Ø 3 Ø 2 32PPR onnector for 3 Tubes Tube (In.) K N 32PPR-5/32 5/ PPR-5 5/ N Pipe Fittings & dapters 322PPSP-5M-4M PPSP-5M-6M PPSP-6M-8M PPSP-8M-8M K N 322PPSP-6M-10M PPSP-8M-10M PPSP-8M-12M PPSP-1012M PPR onnector for 3 Tubes Tube K N 322PPSP-1212M PPR-4M PPSP-1214M PPR-6M PPSP-1414M PPR-8M Pneumatic ivision 24 Richland, Michigan

115 Notes Tubing & Fittings Prestolok omposite Fittings Pipe Fittings & dapters Prestolok Presolok omposite Tubing Pneumatic ivision 25 Richland, Michigan

116 Product Index Tubing & Fittings Push-to-onnect, Prestolok Tube to Male NPTF W68PP Male onnector W68PPR Male onnector Round ody W68PW Male onnector W169PP Male Elbow Swivel W169PPNS Male Elbow Page 30 Page 31 Page 36 Page 33 Page 33 W169PW Male Elbow Swivel W171PP Male Run Tee Swivel W171PW Male Run Tee Swivel W172PP Male ranch Tee Swivel W172PW Male ranch Tee Swivel Page 37 Page 34 Page 37 Page 35 Page 37 62PP Union 62PW Union 164PP Union Tee 164PW Union Tee 165PP Union Elbow Tube to Tube Page 29 Page 36 Page 32 Page 37 Page PW Union Elbow 66PP Female onnector 66PW Female onnector Tube to Female NPTF Page 37 Page 30 Page 36 ulkhead Unions 62PP Union ulkhead 66PP Female ulkhead 62PW Union ulkhead 66PW Female ulkhead Tubing Prestolok omposite Tube to Male SPP PF4- Male onnector Page 29 uxiliary omponents Page 29 Page 36 ust/weld Spatter oot Page 36 Prestolok FP Male onnector Page 31 6P Male Elbow Page 36 P Union JP Union Tee Pipe Fittings & dapters Metric Tube to Male NPTF Page 31 Page 33 Metric Tube to Metric Tube Page 37 Page 32 EP Union Elbow Metric ulkhead Unions WMP Mixed ulkhead Union WP Union ulkhead WE6P Union Elbow ulkhead Page 32 Page 29 Page 29 Page 32 Pneumatic ivision 26 Richland, Michigan

117 Product Index Tubing & Fittings Push-to-onnect, Prestolok Metric Tube to Female SPP G4P Female onnector WG4P Union Female ulkhead Metric Tube to Male SPP 64P Male Elbow Swivel 64SP Male Elbow Swivel Page 30 Page 30 Page 33 Page 34 F4P Male onnector R64P Male Run Tee Swivel S64P Male ranch Tee Swivel Metric Tube to Metric Straight 68P Male Elbow Swivel 68SP Male Elbow Swivel Page 31 Page 34 Page 35 Page 34 Page 34 F28P Male onnector F8P Male onnector R68P Male Run Tee Swivel S68P Male ranch Tee Swivel Page 31 Page 31 Page 34 Page 35 TRP Tube End Reducer FNP Plug TEP Tube End Expander Metric uxiliary omponents Page 35 Page 36 Page 35 Pipe Fittings & dapters Prestolok Presolok omposite Tubing Pneumatic ivision 27 Richland, Michigan

118 Features Tubing & Fittings Prestolok Fittings Materials of onstruction Nickel Plated odies: O-ring: Release utton: Grab Ring: Note: Nickel plated brass Nitrile (other compounds available on request) Polyacetal Stainless Steel For brass body Prestolok replace PP with PN Tubing Prestolok omposite Prestolok Pipe Fittings & dapters Example: W68PP-4-2 W Tube O..: Tube O.. : Nomenclature Tubing sizes ttribute: White rcylic Sealant 68 Male onnector PlP Prestolok 4 1/4" (4/16) Tube O.. 2 1/8" (2/16) Pipe Pressure Range: Temperature Range: Note: Specifications Up to 300 PSI depending on tubing 0 to +200 F Vacuum applications are dependent upon temperature and type of tubing used. 1/8, 3/16, 5/32, 1/4, 5/16, 3/8, 1/2 4,6,8,10,12,14 Recommended Tubing Prestolok nickel plated and composite fittings are designed to be used with the following Parker annifin Parflex ivision tubing. Tubing Series E PP N NR U U Tubing Material inear ow ensity Polyethylene Polypropylene Plasticized Polyamide (Nylon) Unplasticized Polyamide (Rigid Nylon) Polyurethane 90 urometer Shore Polyurethane 95 urometer Shore Other materials for Prestolok inch sized nickel plated fittings: Polyurethane 85 urometer Shore compact one-piece push-to-connect fitting. esigned for low pressure circuits where assembly, disassembly and reassembly is important. Stainless steel grab ring grips the tubing to provide retention. Swivels are featured on all male pipe threaded shapes for installation in tight places and for precise positioning. Prestolok should not be used for live swivel applications. Prestolok fittings come with a pre-applied white acrylic sealant. UTION: ll current manufacturers of 85 PU tubing do not approve the use of push-to-connect fittings with their product. Testing has shown acceptable use with certain O. I.. combinations. pplications and service conditions vary and therefore the use of a tube support may be required for any 85 PU tubing. The following commercially available O.. I.. 85 tubing sizes require the use of a tube support regardless of application. 5/32 3/32 5/16 1/4 3/16 1/8 3/8 5/16 1/ /2 3/8 1/4 3/16 ssembly Instructions 1. ut thermoplastic tubing squarely, using Parker Tube utter PT e certain the port or mating part is clean and free of debris. 2. Insert tubing into fitting until it bottoms. slight twisting motion will ease the insertion. Pull on tubing to verify it is properly retained in the fitting. 3. To disassemble, simply push the release button against the body and remove tubing. 4. It is recommended to trim the tubing after every disassembly to insure a proper seal. Pneumatic ivision 28 Richland, Michigan

119 Numbers Tubing & Fittings Prestolok Fittings W 62PP Union Tube (In.) O.. O.. ia. 62PP-2 1/ PP-3 3/ PP-5/32 5/ PP-4 1/ PP-5 5/ PP-6 3/ PP-8 1/ WP ulkhead Union Tube -mm ex W ulkhead ole ia. WP4 4 M11x mm WP6 6 M13x mm WP8 8 M15x mm WP10 10 M18x mm WP12 12 M23x mm WP14 14 M24x mm Jam nut is supplied loose in box Tube 1 O.. 62PP Unequal Union Tube 2 Tube 1 (In.) Tube 2 (In.) O.. ia. 62PP-5/32-2 5/32 1/ PP-4-2 1/4 1/ PP-4-5/32 1/4 5/ PP-4-6 1/4 3/ PP-6-8 3/8 1/ P Equal Union Tube P P P P P P P P WMP Mixed ulkhead Union Tube 1 Tube 2 -mm W ulkhead ole ia. WMP4 4 4 M8x mm WMP6 6 6 M10x mm WMP8 8 8 M12x mm WMP M14x mm WMP M16x mm WMP M18x mm 2 4 W 1 Tubing Presolok omposite Prestolok 62PP ulkhead Union Tube (In.) ulkhead ole ia. ex p Max. l EX 62PP-2 1/8 7/16 9/ PP-5/32 5/32 7/16 9/ PP-4 1/4 9/16 11/ PP-5 5/16 5/8 3/ PP-6 3/8 3/4 7/ PP-8 1/2 7/ PP Female ulkhead Tube (In.) Pipe Thd (NPTF) ex P Max. ia. khd ole ia. 66PP-5/32-4 5/32 1/4 11/ /2 66PP-4-4 1/4 1/4 11/ /16 66PP-6-6 3/8 3/ /8 66PP-8-6 1/2 3/8 1 1/ P EX Pipe Fittings & dapters Pneumatic ivision 29 Richland, Michigan

120 Numbers Tubing & Fittings Prestolok Fittings 2 EX W 1 EX Tubing Prestolok omposite Prestolok Pipe Fittings & dapters WG4P ulkhead Union Female SPP 66PP Female onnector Tube (In.) Pipe (NPTF) ex ia. 66PP-2-2 1/8 1/8 9/ PP-2-4 1/8 1/4 11/ PP-3-2 3/16 1/8 9/ PP-5/32-2 5/32 1/8 9/ PP-5/32-4 5/32 1/4 11/ PP-4-2 1/4 1/8 9/ PP-4-4 1/4 1/4 11/ PP-5-2 5/16 1/8 9/ PP-5-4 5/16 1/4 11/ PP-6-4 3/8 1/4 11/ PP-6-6 3/8 3/8 13/ G4P Female onnector SPP Tube Tube SPP SPP ex EX G4P4-1/8 4 1/ G4P6-1/8 6 1/ G4P6-1/4 6 1/ G4P8-1/8 8 1/ G4P8-1/4 8 1/ ex 2 ex J W WG4P4-1/8 4 G1/8 M11x WG4P6-1/8 6 G1/8 M13x WG4P6-1/4 6 G1/4 M13x WG4P8-1/8 8 G1/8 M15x WG4P8-1/4 8 G1/4 M15x WG4P10-3/8 10 G3/8 M18x WG4P12-3/8 12 G3/8 M23x WG4P12-1/2 12 G1/2 M23x J 2 W68PP Male onnector Tube (In.) Pipe Thd (NPTF) ex l EX ia. W68PP-2-1 1/8 1/16 3/ W68PP-2-2 1/8 1/8 7/ W68PP-2-4 1/8 1/4 9/ W68PP-3-2 3/16 1/8 7/ W68PP-3-4 3/16 1/4 9/ W68PP-5/32-1 5/32 1/ W68PP-5/32-2 5/32 1/8 7/ W68PP-5/32-4 5/32 1/4 9/ W68PP-4-1 1/4 1/16 1/ W68PP-4-2 1/4 1/8 1/ W68PP-4-4 1/4 1/4 9/ W68PP-4-6 1/4 3/8 3/ W68PP-5-2 5/16 1/8 9/ W68PP-5-4 5/16 1/4 9/ W68PP-5-6 5/16 3/8 11/ W68PP-6-2 3/8 1/8 5/ W68PP-6-4 3/8 1/4 5/ W68PP-6-6 3/8 3/8 11/ W68PP-6-8 3/8 1/2 7/ W68PP-8-4 1/2 1/4 13/ W68PP-8-6 1/2 3/8 13/ W68PP-8-8 1/2 1/2 7/ PP-5/32-4T* 5/32 1/4-28 7/ *SE-T s 68PP-X-0 Male onnector Tube (In.) Pipe (NPTF) ex Seal (Neoprene) l ex ia. 68PP-2-0 1/8 10x32 3/ PP-5/32-0 5/32 10x32 68PP-4-0 1/4 10x32 1/ Pneumatic ivision 30 Richland, Michigan

121 Numbers Tubing & Fittings Prestolok Fittings 68PPR Round ody Male onnector Tube (In.) NPTF Internal ex roach ody ia. O.. O.. ia. 68PPR-2-0* 1/ /32 3/8" PPR-5/32-0* 5/ /32 3/8" PPR-4-0* 1/ /32 1/2" W68PPR-5/32-1 5/32 1/16 1/8 7/16" W68PPR-5/32-2 5/32 1/8 1/8 7/16" W68PPR-4-1 1/4 1/16 5/32 1/2" W68PPR-4-2 1/4 1/8 3/16 1/2" W68PPR-4-4 1/4 1/4 3/16 5/8" *10-32 seal is neoprene PPF4- Male onnector SPP Tube (In.) Pipe Thd SPP ex l ia. 3-1/8PPF4-3/16 1/ / /4PPF4-3/16 1/4-19 3/ /8PPF4-1/4 1/ / /4PPF4-1/4 1/4-19 3/ /8PPF4-1/4 3/8-19 7/ /4PPF4-3/8 1/4-19 3/ /8PPF4-3/8 3/8-19 7/ /2PPF4-3/8 1/ / /8PPF4-1/2 3/8-19 7/ /2PPF4-1/2 1/ / ex F4P ompact Male onnector SPP Tube SPP ex F4P4-1/8 4 1/ F4P4-1/4 4 1/ F4P6-1/8 6 1/ F4P6-1/4 6 1/ F4P8-1/4 8 1/ F4P8-1/8 8 1/ F4P8-3/8 8 3/ F4P10-1/4 10 1/ F4P10-3/8 10 3/ F4P10-1/2 10 1/ F4P12-1/4 12 1/ F4P12-3/8 12 3/ F4P12-1/2 12 1/ F4P14-3/8 14 3/ F4P14-1/2 14 1/ F28P Male onnector Metric Straight Tube EX F28P4M3 4 M3x F28P4M5 4 M5x F28P6M5 6 M5x This fitting has been designed for use where space is at a premium. It is assembled using the internal hexagon and an allen key. J J Tubing Presolok omposite FP Male onnector NPT Tube NPT ex P Int. ex W68PP-5/ /8-27 7/16" W68PP-5/ /4-18 9/16" FP6-1/8 6 1/ FP6-1/4 6 1/ FP10-1/4 10 1/ FP10-3/8 10 3/ FP12-3/8 12 3/ P F8P Male onnector Metric Straight Tube ex F8P4M5 4 M5x F8P4M10 4 M10x F8P6M5 6 M5x F8P6M10 6 M10x F8P6M12 6 M12x F8P8M12 8 M12x F8P8M16 8 M16x F8P8M22 8 M22x Prestolok Pipe Fittings & dapters Pneumatic ivision 31 Richland, Michigan

122 Numbers Tubing & Fittings Prestolok Fittings M M 164PP Union Tee EP 90 Union Elbow Tube (In.) ia. Tube ex M 164PP-2 1/ EP PP-3 3/ EP PP-5/32 5/ EP PP-4 1/ EP PP-5 5/ EP PP-6 3/ EP PP-8 1/ EP M M 1 W JP Union Tee M WE6P djustable ulkhead Union Elbow 4 Tube M JP JP JP Tube ex 4 ex 1 M W khd ole ia. WE6P4 4 M11x mm WE6P6 6 M13x mm WE6P8 8 M15x mm JP WE6P10 10 M18x mm Tubing Prestolok omposite JP JP JP WE6P12 12 M23x mm Prestolok Pipe Fittings & dapters 165PP Union Elbow Tube (In.) ia. 165PP-2 1/ PP-5/32 5/ PP-3 3/ PP-4 1/ PP-5 5/ PP-6 3/ PP-8 1/ Pneumatic ivision 32 Richland, Michigan

123 Numbers Tubing & Fittings Prestolok Fittings M W169PP Male Elbow Swivel 90 Tube (In.) Pipe (NPTF) ex N l N EX ia. W169PP-2-1 1/8 1/16 3/ W169PP-2-2 1/8 1/8 7/ PP-2-0* 1/ / W169PP-2-4 1/8 1/4 9/ W169PP-3-2 3/16 1/8 7/ W169PP-5/32-1 5/32 1/16 3/ W169PP-5/32-2 5/32 1/8 7/ W169PP-5/32-4 5/32 1/4 9/ PP-5/32-0* 5/ / W169PP-4-1 1/4 1/16 3/ W169PP-4-2 1/4 1/8 7/ W169PP-4-4 1/4 1/4 9/ W169PP-4-6 1/4 3/8 11/ PP-4-0* 1/ / W169PP-5-2 5/16 1/8 9/ W169PP-5-4 5/16 1/4 9/ W169PP-6-2 3/8 1/8 9/ W169PP-6-4 3/8 1/4 9/ W169PP-6-6 3/8 3/8 11/ W169PP-6-8 3/8 1/2 7/ W169PP-8-4 1/2 1/4 9/ W169PP-8-6 1/2 3/8 11/ W169PP-8-8 1/2 1/2 7/ *10-32 seal is neoprene W169PPNS Male Elbow 90 Tube (In.) Pipe (NPTF) N N ia. W169PPNS-2-2 1/8 1/ W169PPNS5/32-2 5/32 1/ W169PPNS5/32-4 5/32 1/ W169PPNS-4-2 1/4 1/ W169PPNS-4-4 1/4 1/ W169PPNS-5-2 5/16 1/ W169PPNS-5-4 5/16 1/ W169PPNS-6-4 3/8 1/ W169PPNS-6-6 3/8 3/ W169PPNS-6-8 3/8 1/ W169PPNS-8-6 1/2 3/ W169PPNS-8-8 1/2 1/ PPNS532-4T* 5/32 1/ * SE-T s 6P djustable Male Elbow NPT Tube NPT ex 4 ex M N 6P6-1/4 6 1/ P6-3/8 6 3/ P10-1/4 10 1/ P10-3/8 10 3/ P12-1/2 12 1/ P djustable Male Elbow SPP Tube SPP ex 4 ex 4 J M N 64P4-1/8 4 1/ P4-1/4 4 1/ P6-1/8 6 1/ P6-1/4 6 1/ P8-1/8 8 1/ P8-1/4 8 1/ P8-3/8 8 3/ P10-1/4 10 1/ P10-3/8 10 3/ P12-1/4 12 1/ P12-3/8 12 3/ P12-1/2 12 1/ P14-3/8 14 3/ P14-1/2 14 1/ M J N N Tubing Presolok omposite Prestolok Pipe Fittings & dapters Pneumatic ivision 33 Richland, Michigan

124 Numbers Tubing & Fittings Prestolok Fittings M N 1 64SP ompact djustable Male Elbow SPP Tube SPP ex EX J M N N J W171PP Male Run Tee Swivel Tube (In.) Pipe (NPTF) ex N ia. W171PP-2-2 1/8 1/8 7/ EX 64SP4-1/8 4 1/ W171PP-5/32-2 5/32 1/8 7/ SP6-1/8 6 1/ W171PP-4-2 1/4 1/8 7/ SP6-1/4 6 1/ W171PP-4-4 1/4 1/4 9/ SP8-1/8 8 1/ W171PP-4-6 1/4 3/8 11/ SP8-1/4 8 1/ W171PP-5-2 5/16 1/8 9/ SP8-3/8 8 3/ W171PP-5-4 5/16 1/4 9/ SP10-1/4 10 1/ W171PP-6-4 3/8 1/4 9/ SP10-3/8 10 3/ W171PP-6-6 3/8 3/8 11/ SP12-1/4 12 1/ W171PP-8-6 1/2 3/8 11/ SP12-3/8 12 3/ W171PP-8-8 1/2 1/2 7/ SP12-1/2 12 1/ N J Tubing Prestolok omposite 68P djustable Male Elbow Metric Straight Tube ex 4 ex M N 68P4M5 4 M5x P6M5 6 M5x M M N R64P Swivel Male ranch Run Tee SPP Tube SPP ex 4 ex M 4 J M N R64P4-1/8 4 1/ R64P4-1/4 4 1/ R64P6-1/8 6 1/ R64P6-1/4 6 1/ R64P8-1/8 8 1/ R64P8-1/4 8 1/ R64P8-3/8 8 3/ R64P10-1/4 10 1/ R64P10-3/8 10 3/ R64P12-1/4 12 1/ Prestolok Pipe Fittings & dapters 68SP ompact djustable Male Elbow Metric Straight Tube ex J M N 68SP4M5 4 M5x EX J N R64P12-3/8 12 3/ R64P14-3/8 14 3/ R64P14-1/2 14 1/ N 68SP6M5 6 M5x R68P djustable Male Run Tee Metric Straight M 4 Tube ex 4 ex M N R68P4M3 4 M3x R68P4M5 4 M5x R68P6M5 6 M5x Pneumatic ivision 34 Richland, Michigan

125 Numbers Tubing & Fittings Prestolok Fittings M W172PP Male ranch Tee Swivel Tube (In.) Pipe (NPTF) N ex N EX ia. W172PP-2-2 1/8 1/8 7/ W172PP-3-2 3/16 1/8 7/ W172PP-5/32-2 5/32 1/8 7/ W172PP-4-2 1/4 1/8 7/ S68P djustable Male ranch Tee Metric Straight Tube ex 4 ex M N S68P4M3 4 M3x S68P4M5 4 M5x S68P6M5 6 M5x N 4 W172PP-4-4 1/4 1/4 9/ W172PP-4-6 1/4 3/8 11/ W172PP-5-2 5/16 1/8 9/ W172PP-5-4 5/16 1/4 9/ W172PP-6-4 3/8 1/4 9/ W172PP-6-6 3/8 3/8 11/ W172PP-8-4 1/2 1/4 9/ W172PP-8-6 1/2 3/8 11/ W172PP-8-8 1/2 1/2 7/ TEP Tube End Expander Tube 1 Tube 2 TEP M S64P Swivel Male ranch Tee SPP Tube SPP ex 4 ex M N S64P4-1/8 4 1/ S64P4-1/4 4 1/ S64P6-1/8 6 1/ S64P6-1/4 6 1/ S64P8-1/8 8 1/ S64P8-1/4 8 1/ S64P8-3/8 8 3/ S64P10-1/4 10 1/ S64P10-3/8 10 3/ S64P12-1/4 12 1/ S64P12-3/8 12 3/ S64P14-3/8 14 3/ S64P14-1/2 14 1/ N 4 TRP Tube End Reducer Tube 1 Tube 2 TRP TRP TRP TRP TRP TRP TRP TRP TRP TRP TRP TRP Tubing Presolok omposite Prestolok Pipe Fittings & dapters Pneumatic ivision 35 Richland, Michigan

126 Numbers Tubing & Fittings Prestolok Fittings FNP Plug Tube FNP FNP FNP FNP FNP FNP PW Female onnector (Nickel Plated) Tube (In.) Pipe (NPTF) ex EX ia. 66PW-4-2 1/4 1/8 9/ PW-4-4 1/4 1/4 11/ PW-5-2 5/16 1/8 9/ PW-5-4 5/16 1/4 11/ PW-6-4 3/8 1/4 11/ PW-6-6 3/8 3/8 13/ ust/weld Spatter oot Tube (In.) -4 1/ / / PW Female ulkhead (Nickel Plated) Tube (In.) (NPTF) ex P Max. ia. P EX ulkhead ole ia. 66PW-4-4 1/4 1/4 11/ /16 66PW-6-6 3/8 3/ /8 66PW-8-6 1/2 3/8 1 1/ Tubing Prestolok omposite Prestolok Pipe Fittings & dapters 62PW Union (Nickel Plated) Tube (In.) O.. O.. ia. 62PW-4 1/ PW-5 5/ PW-6 3/ PW-8 1/ PW ulkhead Union (Nickel Plated) Tube (In.) ulkhead ole ia. ex P Max. 62PW-4 1/4 9/16 11/ PW-5 5/16 5/8 3/ PW-6 3/8 3/4 7/ PW-8 1/2 7/ P EX W68PW Male onnector (Nickel Plated) Tube (In.) (NPTF ex EX ia. W68PW-4-2 1/4 1/8 1/ W68PW-4-4 1/4 1/4 9/ W68PW-4-6 1/4 3/8 3/ W68PW-5-2 5/16 1/8 9/ W68PW-5-4 5/16 1/4 9/ W68PW-5-6 5/16 3/8 11/ W68PW-6-2 3/8 1/8 5/ W68PW-6-4 3/8 1/4 5/ W68PW-6-6 3/8 3/8 11/ W68PW-6-8 3/8 1/2 7/ W68PW-8-4 1/2 1/4 13/ W68PW-8-6 1/2 3/8 13/ W68PW-8-8 1/2 1/2 7/ Pneumatic ivision 36 Richland, Michigan

127 Numbers Tubing & Fittings Prestolok Fittings 164PW Union Tee (Nickel Plated) Tube (In.) ia. 164PW-4 1/ PW-5 5/ PW-6 3/ PW-8 1/ W171PW Male Run Tee Swivel (Nickel Plated) Tube (In.) Pipe (NPTF) ex EX N N ia. W171PW-4-2 1/4 1/8 7/ W171PW-4-4 1/4 1/4 9/ W171PW-4-6 1/4 3/8 11/ W171PW-5-2 5/16 1/8 9/ W171PW-5-4 5/16 1/4 9/ W171PW-6-4 3/8 1/4 9/ W171PW-6-6 3/8 3/8 11/ W171PW-8-6 1/2 3/8 11/ W171PW-8-8 1/2 1/2 7/ PW Union Elbow (Nickel Plated) Tube (In.) ia. 165PW-4 1/ PW-5 5/ PW-6 3/ PW-8 1/ W169PW Male Elbow Swivel 90 (Nickel Plated) Pipe (In.) (NPTF) ex N N EX ia. W169PW-4-2 1/4 1/8 7/ W169PW-4-4 1/4 1/4 9/ W169PW-4-6 1/4 3/8 11/ W169PW-5-2 5/16 1/8 9/ W169PW-5-4 5/16 1/4 9/ W169PW-6-2 3/8 1/8 9/ W169PW-6-4 3/8 1/4 9/ W169PW-6-6 3/8 3/8 11/ W169PW-6-8 3/8 1/2 7/ W169PW-8-4 1/2 1/4 9/ W169PW-8-6 1/2 3/8 11/ W169PW-8-8 1/2 1/2 7/ W172PW Male ranch Tee Swivel (Nickel Plated) Pipe (In.) (NPTF) ex N N EX ia. W172PW-4-2 1/4 1/8 7/ W172PW-4-4 1/4 1/4 9/ W172PW-4-6 1/4 3/8 11/ W172PW-5-2 5/16 1/8 9/ W172PW-5-4 5/16 1/4 9/ W172PW-6-4 3/8 1/4 9/ W172PW-6-6 3/8 3/8 11/ W172PW-8-4 1/2 1/4 9/ W172PW-8-6 1/2 3/8 11/ W172PW-8-8 1/2 1/2 7/ P Equal Union Tube P P P P Tubing Presolok omposite Prestolok Pipe Fittings & dapters Pneumatic ivision 37 Richland, Michigan

128 Product Index Tubing & Fittings Pipe Fittings & dapters 207 nchor oupling 207P Pipe oupling 208P Reducer oupling 209P Pipe ushing 210P ock Nut Industrial Pipe Fittings Page 40 Page 40 Page 40 Page 40 Page P Square-head Plug 212P Union 213P ap 215PN lose Nipple 215PN ong Nipple 216P ex Nipple Page 40 Page 40 Page 41 Page 41 Page 41 Page P ex-ead Plug 219P ountersunk Plug 220P Slotted-ead Plug 222P dapter 1200P-2200P Union Elbow 1202P-2202P Street Elbow Page 41 Page 41 Page 42 Page 42 Page 42 Page P-2203P Union Tee 1204P Male Elbow 2224P Male ranch Tee 2225P Street Tee 1201P-2201P 45 Female Elbow 2205P ross Page 42 Page 42 Page 43 Page 43 Page 43 Page P 45 Street Elbow Metric dapters SP Elbow FF44 SPP ex Nipple FG4 dapter Male-SPP GG44 Pipe onnector Tubing Prestolok omposite KMM004 SPP ross Page 43 MM0444 Pipe Tee Page 45 WGG44 ulkhead Female Union Page 45 Page 45 Page 45 Prestolok Page 45 Page 45 Page 45 Pipe Fittings & dapters Pneumatic ivision 38 Richland, Michigan

129 Features Tubing & Fittings Pipe Fittings Materials of onstruction Fittings: 345, 360, 377 Nomenclature Example: 2214P 2 2 ttribute: 2 Extrusion 1 (not shown) Forging Street Elbow p Pipe 2 1/8" Pipe 2 1/8" Pipe pplicable Tube Tube Material: opper, brass, iron pipe size: 1/8, 1/4, 3/8, 1/2, 3/4, 1 Pressure Range: Temperature Ranges: Specifications Up to 1,000 PSI -65 to +250 F ll pipe fittings meet functional requirements of SE J530 and SE J531. s are made to ryseal standards. Pipe thread assembly guide (turns method) for ryseal threads with pre-applied Vibra Seal Finger Tight Straight Fittings 1. Tighten external thread into the internal thread. Wrench Tight Tubing 2. Tighten an additional 2 revolutions with a wrench up to 1 2 in. male pipe thread. bove 1 2 in., to revolutions. Finger Tight lockwise to align Presolok omposite Elbow or Tee Fittings 1. Tighten external thread into the internal thread. 2. Tighten an additional 1 to revolutions with a wrench. 3. Tighten fitting, lockwise, to lign with Tubing (never counter clockwise). Wrench Tight Prestolok Pipe Fittings & dapters Note: To minimize the possibility of a leaking threaded joint after assembling male to female pipe threads, neither end should be backed out (loosened) once the assembly has been made. Pneumatic ivision 39 Richland, Michigan

130 Numbers Tubing & Fittings Pipe Fittings 207 nchor oupling Max. Female Straight ulk Pipe ead P ex ex P EX lkhd ole ia. EX ia /8 5/ /8 15/ / S-2 1/8 5/ /8 15/ / /4 3/ / / S-4 1/4 3/ / / /8 1-1/ /2 1-1/ /4 1-3/ / /4 1-5/ /2 1-1/ / * 1 1-5/ / *ock Washer not vailable 209P ushing 1 Pipe 2 Pipe ex 1 EX ia. 209P-4-2 1/8 1/4 9/ P-6-2 1/8 3/8 11/ P-6-4 1/4 3/8 3/ P-8-2 1/8 1/2 7/ P-8-4 1/4 1/2 7/ P-8-6 3/8 1/2 7/ P /8 3/4 1-1/ P /4 3/4 1-1/ P /8 3/4 1-1/ P /2 3/4 1-1/ P / / P / / P oupling EX Pipe ex ia. 207P-2 1/8 9/ P-4 1/4 3/ P-6 3/8 7/ P-8 1/2 1-1/ P-12 3/4 1-3/ P ock Nut Pipe ex 210P-2 1/8 NPS 11/ P-4 1/4 NPS 7/ P-6 3/8 NPS P-8 1/2 NPS 1-1/8.25 EX Tubing Prestolok omposite Prestolok Pipe Fittings & dapters 208P Reducer oupling 1 Pipe 2 Pipe ex 1 EX ia. 208P-4-2 1/4 1/8 3/ P-6-4 3/8 1/4 7/ P-8-4 1/2 1/4 1-1/ P-8-6 1/2 3/8 1-1/ P /4 3/8 1-3/ P /4 1/2 1-3/ P Square-ead Plug Pipe M 211P-2 1/8 9/ P-4 1/4 3/ P-6 3/8 7/ P-8 1/2 9/ P-12 3/4 5/ M 212P Union EX Pipe ex 212P-4 1/4 1-3/ P-6 3/8 1-1/ Pneumatic ivision 40 Richland, Michigan

131 Numbers Tubing & Fittings Pipe Fittings 213P ap Pipe ex 213P-2 1/8 9/ P-4 1/4 11/ P-6 3/8 13/ P-8 1/2 1-1/ P-12 3/4 1-1/4.89 EX 216P ex Nipple Pipe ex ia. 216P-2 1/8 7/ P-4 1/4 9/ P-6 3/8 11/ P-8 1/2 7/ P-12 3/4 1-1/ EX 215PN lose Nipple 216P ex Nipple Reducers 1 EX 2 Pipe ia. 215PN-2 1/ PN-4 1/ PN-6 3/ PN-8 1/ PN-12 3/ Pipe 2 Pipe ex ia. 216P-4-2 1/4 1/8 9/ P-6-2 3/8 1/8 11/ P-6-4 3/8 1/4 11/ P-8-4 1/2 1/4 7/ P-8-6 1/2 3/8 7/ P /4 1/2 1-1/ PN ong Nipple Pipe ia. 215PN /8 1-1/ P ex-ead Plug EX Tubing 215PN /4 1-1/ PN /8 1-1/ PN /2 1-1/ PN / PN / PN / PN / PN /8 2-1/2.250 Pipe ex 218P-2 1/8 7/ P-4 1/4 9/ P-6 3/8 11/ P-8 1/2 7/ P-12 3/4 1-1/ Presolok omposite Prestolok 215PN /4 2-1/ PN /8 2-1/ PN /2 2-1/ PN / PN / PN / P ountersunk ex-ead Plug Pipe ex EX Pipe Fittings & dapters 215PN / P-2 1/8 3/ PN /8 3-1/ P-4 1/4 1/ PN /4 3-1/ P-6 3/8 5/ PN /8 3-1/ P-8 1/2 3/ PN /2 3-1/ P-12 3/4 9/16.62 Pneumatic ivision 41 Richland, Michigan

132 Numbers Tubing & Fittings Pipe Fittings 220P Slotted-ead Plug Pipe 220P-2 1/ P-4 1/ P-6 3/ P-2202P 90 Street Elbow 1 Pipe 1202P N 2 Pipe M M 2202P N 1 N M ia P-2-2 1/8 1/ P-2-2 1/8 1/ P-2-2* 1/8 1/ P-4-2 1/4 1/ P dapter 1 Pipe 2 Pipe ex 1 EX 2 ia. 222P-2-2 1/8 1/8 9/ P-4-2 1/4 1/8 3/ P-4-4 1/4 1/4 3/ P-6-2 3/8 1/8 7/ P-4-4 1/4 1/ P-4-4 1/4 1/ P-4-4* 1/4 1/ P-4-6 1/4 3/ P-6-4 3/8 1/ P-6-6 3/8 3/ P-6-6 3/8 3/ P-6-6* 3/8 3/ *Meets SE imensions 222P-6-4 3/8 1/4 7/ P-6-6 3/8 3/8 7/ P-8-4 1/2 1/ P-8-6 1/2 3/8 1-1/ P-8-8 1/2 1/2 1-1/ P /4 3/8 1-3/ P /4 1/2 1-3/ P-2203P Union Tee 1203P M M 2203P M M Tubing Prestolok omposite 222P /4 3/4 1-3/ Pipe M ia. 1203P-2 1/ P-2 1/ P-4 1/ P-4 1/ P-6 3/ Prestolok 1200P M 2200P M 1203P-8 1/ P-8 1/ P-12 3/ Pipe Fittings & dapters 1200P-2200P 90 Union Elbow Pipe M M M ia. M M 1200P-2-2 1/ P-2-2 1/ P-4-4 1/ P Male Elbow Pipe M ia. 2200P-4-4 1/ P-2 1/ P-6-6 3/ P-4 1/ P-6-6 3/ P-6 3/ P-8-8 1/ P-8 1/ Pneumatic ivision 42 Richland, Michigan

133 Numbers Tubing & Fittings Pipe Fittings M M N M 2224P Male ranch Tee 2205P ross Pipe M N ia. Pipe M ia. 2224P-2 1/ P-4 1/ P-6 3/ P-8 1/ P-12 3/ P-2 1/ P-4 1/ P-6 3/ P-8 1/ P-12 3/ M N M N 2225P Street Tee M 2214P 45 Street Elbow Pipe M N ia. Pipe M N ia. 2225P-2 1/ P-2-2 1/ P-4 1/ P-4-4 1/ P-6 3/ P-8 1/ P-12 3/ P-6-6 3/ P-8-8 1/ Tubing 1201P-2201P 45 Female Elbow Pipe 1201P 2201P M M ia. M Presolok omposite Prestolok 2201P-2-2 1/ P-8-8 1/ Pipe Fittings & dapters Pneumatic ivision 43 Richland, Michigan

134 Features Tubing & Fittings Metric dapters Materials of onstruction dapters: rass pplicable Tube Tube Material: opper, brass, iron pipe NPT: 1/8, 1/4, 3/8, 1/2 SPT: 1/8, 1/4, 3/8, 1/2, 3/4, 1 SPP: 1/8, 1/4, 3/8, 1/2, 3/4, 1 Specifications Pressure Range: Temperature Ranges: Up to 1,000 PSI -65 to +250 F comprehensive range of adapters for NPT, SPT and SPP pipe threads. Produced in both forgings and extrusions. Parker brass adapters are produced from forgings and extrusions to meet exacting requirements. The hot forging process increases the density of the material, refines the grain structure and improves material strength. Tubing Prestolok omposite Prestolok Pipe Fittings & dapters Pneumatic ivision 44 Richland, Michigan