Series VC Direct Operated 2 Port Solenoid Valve for Oil Series VCL
|
|
- Helena Dixon
- 6 years ago
- Views:
Transcription
1 T.S0-8 Series V irect Operated Port Solenoid Valve for Oil Series VL
2 Multipurpose Valve for Oil irect Operated Port Solenoid Valve for Oil Series VL Kerosene, uel oil class (fuel oil ), Silicone oil, Machine oil, ompressor oil, as oil, ydraulic fluid, Turbine oil Improved durability (nearly twice the life of the previous series) The internal wear of moving parts has been reduced through the use of a unique magnetic material. Service life, durability and corrosion resistance have been increased. igh speed response (nearly twice the previous series) (lass ) igh flow rate: v factor 0. to. Smaller size: Single valve % reduction in volume (lass ) Manifold length Reduced by 8% (lass : stations) (SM comparison) Internal surge voltage suppressor (lass coil) Internal rectifier circuit () / switchover is possible by simply changing the coil Reduced noise Note) or lass coil lip type Quick change coils lip design makes coil replacement easy Incombustible molded coil material onforms to UL9 V-0 oil size and weight reduced New compact coil reduces the overall size & weight of the valve Volume % Weight 0% SM comparison (lass ) Threaded assembly Simplifies maintenance variety of wiring options (lass coil) rommet, IN connector, onduit, onduit terminal Wiring specifications (lass coil) Wiring variations ottom mounting threads Mounting bracket also available nclosure: ust tight and splash proof (equivalent to IP) sizes available rommet IN connector onduit onduit terminal VL lass VL lass VL lass eatures
3 Series V irect Operated Port Solenoid Valve for Oil Series VL ow to Order Valves (Single Type) V L 0 or oil When no symbol is shown for material and insulation type ody material: Seal material: KM oil insulation: lass Series Valve type Voltage lass lass lass 00V 00V 0V 0V V V 0V lectrical entry rommet N.. OUT IN T -With conduit terminal TL-With conduit terminal/light lass with has a built-in rectifying circuit. lass is only. Without rectifying circuit. ontact SM regarding other voltages. onduit -IN connector L -IN connector with light O-or IN connector (without connector) onnector ll class coils are equipped with surge voltage suppressor. lass coils are available only with "rommet" electrical enty. (Not equipped with surge voltage suppressor.) Symbol 0 Symbol Orifice size Thread type Nil N T Orifice diameter ømm ømm ømm ømm ømm ø0mm /8 () / (8) /8 (0) / () / (0) lass Rc NPT NPT lass lass Refer to the table below for orifice and port size combinations. Option Nil lass lass Orifice and port size combinations Orifice diameter lass ø ø ø ø ø ø0 /8 () / (8) / (8) /8 (0) / () / (8) /8 (0) / () / (0) None oot type bracket Material and insulation type Symbol ody material Seal material oil insulation Nil lass lass KM Stainless lass N steel lass lass
4 Series VL Specifications Valve specifications oil specifications Valve construction luid Withstand pressure MPa ody material Seal material Note ) mbient temperature Note ) luid temperature nclosure nvironment Valve leakage cm /min Mounting position haracteristic Specifications Standard specifications 0 to 0 0 to 0 (with no freezing) irect operated poppet Oil [0mm²/s {0cSt} ] or less.0, Stainless steel KM igh temperature specifications 0 to 00 0 to 00 Splash-proof (equivalent to IP) Location without corrosive or explosive gases 0 (with oil pressure) Unrestricted Rated voltage llowable voltage fluctuation ±0% of rated voltage V, V, 00V, 0V, 00V, 00V, 0V, 00V, 0V, 0V (0/0z) 0V (0/0z) oil insulation type lass lass Power consumption VL0: W, VL0: 8W, VL0:.W pparent power Note ) VL0: 8.V, VL0: 0V, Inrush VL0: /9V, VL0: /0V, VL0: /V 0/0z VL0: V olding VL0: 0/8V, VL0: /V, VL0: 9/V Note ) When the ambient temperature or fluid temperature is 0 or more, use high temperature specifications (class coil). Note ) Since a rectifier circuit is used for class coils with, there is no difference in apparent power for starting or holding. Model VL VL VL lass Note ) /8 () / (8) / (8) /8 (0) / () / (8) /8 (0) / () / (0) Note ) Orifice diameter ø ø ø ø ø ø ø ø ø0 ø ø ø ø ø0 N.. Max. operating pressure difference MPa ffective area mm² (v factor).8 (0.).9 (0.) 9. (0.). (0.). (0.) 9. (0.). (0.80).8 (.8).8 (.0). (0.) 0.8 (0.0). (0.8).8 (.8).8 (.0) Note ) Refer to model selection on page regarding port size and orifice size combinations. Note ) The weight is the value for the grommet type. Max. system pressure MPa Weight kg Note ) /8: 0. /: 0. /: 0. /8: 0.0 /: 0.9 /: 0.8 /8: 0. /: 0. /: 0.8
5 irect Operated Port for Oil Series VL onstruction Parts list No. escription lip Tube assembly oil assembly rmature assembly O-ring Return spring ody Material Standard Optional Stainless steel Stainless steel Stainless steel, u (for class coil) lass lass Stainless steel, KM KM Stainless steel Stainless steel imensions/racket J -ø. L -ø Valve mounting hole racket mounting dimensions Valve model VL VL VL /8, / /, /8 / /, /8 / / racket part no. VW0--0 VW0--0 VW0--0 VW0--0 VW0--0 VW J L 9 9 racket material: Stainless steel
6 Series VL imensions (N..) rommet: onduit: pprox. 00 pprox. 00 V Q pprox. 80 Q R lass coil roken line section / R -P -M, thread depth N -P -M, thread depth N L L K K IN terminal: onduit terminal: T able ø.8 to ø0. Q S (Q) R () / -P / (S) -P -M, thread depth N -M L R R L K K N.. dimensions (mm) Model P Rc K L M N Q rommet: onduit: IN terminal: onduit terminal: T Note) V R Q R Q R S Q R S U /8 VL / /, /8 VL / /, /8 VL / / Note) or class M M M M M M M
7 irect Operated Port for Oil Series VL ow to Order Manifolds VV L 0 0 or oil Manifold material: Series Material Symbol Nil lass lass lass ody material Seal material KM Stainless steel KM 0 : 0 Stations stations : 0 stations Refer to the "L" dimensions on page regarding the maximum number of stations. Symbol 0 0 Thread type Symbol Nil N T OUT port size ll IN ports are /8. Thread type Rc NPT NPT /8 () / (8) ow to Order Manifold ssemblies (xample) nter the valve and option models to be mounted under the manifold base part number. <xample> VVL-00. set Manifold part no. VL--... sets Valve part no. (Stations to ) " " is the symbol for mounting. dd a " " in front of the part numbers for solenoid valves, etc. to be mounted. nter together in order, counting from station on the side. Stations n side U side ow to Order Valves (for Manifold) or oil When there is no symbol for material and insulation type ody material: Seal material: KM oil insulation: lass Series Manifold Options V L VVW 0 Series lass lass lass Valve type N.. for manifold Voltage 00V 00V 0V 0V V V 0V lass with has a built-in rectifying circuit. lass is only. Without rectifying circuit. ontact SM regarding other voltages. lanking plate assembly lass lass lass lectrical entry T TL L O rommet onduit onduit terminal onduit terminal with light IN connector IN connector with light or IN connector (without connector) Material Symbol This is used by mounting it on the manifold block when a valve is removed for maintenance, or when the mounting of an additional valve is planned, Material and insulation type Symbol Nil N ody material Stainless steel Orifice size Symbol Plate material Seal material KM Stainless steel Seal material oil insulation lass lass KM lass lass Orifice diameter ømm ømm ømm ømm ømm ll class coils are equipped with surge voltage suppressor. lass coils are available with "-rommet" electrical entry only. (Not equipped with surge voltage suppressor.) JIS symbol lass lass lass
8 Series VL imensions (N..) (X) Q (V) S (U) (Y) Z R T W () T l=80 l=00 IN port - /8. (N) L L L side Stations n U side P=J (pitch) OUT port n- / n- /8. : Thread type L dimensions (mm) Model imension n (stations) VVL VVL VVL L L L L L L L L L Manifold composition stns. x stns. x stns. x stns. + stns. Note) Manifold bases are composed by connecting station and station bases. stns. x stns. x + stns. stns. + stns. x stns. x stns. x + stns. x imensions (mm) lectrical entry Model VVL VVL VVL J. 8.. Z 8 8 rommet onduit IN connector onduit terminal Q R.. S.. T. 0. U 8 0 V 8 0 W. 8. N 8 0 X Y 8. 9
9 Series VL Model Selection VL (for oil) port solenoid valve (N..) Model Material ody Seal VL (for oil) rass port (Stainless steel) solenoid valve OUT IN N.. KM ow to find the flow rate for oil Orifice diameter lass ø ø ø ø ø /8 ( ) / ( 8) / ( 8) /8 (0) / () / ( 8) /8 (0) / () / (0) ormula based on v factor Q=. v 0. P l/min ormula based on effective area (Smm²) Q=0.8 S 0. P l/min Q : low rate (l/min) P: Pressure differential (P P) P : Upstream pressure (MPa) P : ownstream pressure (MPa) S : ffective area (mm²) v: v factor : luid specific gravity (water = ) ø0 xplanation of Terminology Pressure Terminology. Maximum operating pressure differential This indicates the maximum pressure differential (upstream and downstream pressure differential) which can be allowed for operation with the valve closed or open. When the downstream pressure is 0MPa, this becomes the maximum operating pressure.. Maximum system pressure This indicates the limit of pressure that can be applied inside the pipelines. (line pressure) (The pressure differential of the solenoid valve unit must be no more than the maximum operating pressure differential.). Withstand pressure The pressure which must be withstood without a drop in performance after returning to the operating pressure range. (value under the prescribed conditions) lectrical Terminology. Surge voltage high voltage which is momentarily generated in the shut-off unit by shutting off the power. Other. Materials KM: luoro rubber Trade names: Viton, ai-el, etc.. Symbols In the JIS symbol ( ) IN and OUT are in a blocked condition ( ), but actually in the case of reverse pressure (OUT>IN), there is a limit to the blocking capability. ( ) is used to indicate that blocking of reverse pressure is not possible. Note) In case of a viscous fluid, there may be a difference between the flow rate found with the above formulas and the actual flow rate, depending on the viscosity.
10 Series VL Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by a label of "aution", "Warning" or "anger". To ensure safety, be sure to observe ISO Note ) and other safety practices. aution : Operator error could result in injury or equipment damage. Warning : Operator error could result in serious injury or loss of life. anger : In extreme conditions, there is a possible result of serious injury or loss of life. Note ) ISO : Pneumatic fluid power -- Recommendations for the application of equipment to transmission and control systems Warning. The compatibility of equipment is the responsibility of the person who designs the system or decides its specifications. Since the products specified here are used in various operating conditions, their compatibility for the specific system must be based on specifications or after analysis and/or tests to meet your specific requirements. e particularly careful in determining the compatibility of the fluid to be used.. Only trained personnel should operate machinery and equipment. The fluid can be dangerous if handled incorrectly. ssembly, handling or repair of systems should be performed by trained and experienced operators.. o not service machinery/equipment or attempt to remove components until safety is confirmed.. Inspection and maintenance of machinery/equipment should only be performed after confirmation of safe locked-out control positions and measures to prevent danger from the fluid.. When equipment is to be removed, confirm the safety process as mentioned above and be certain there is no danger from fluid leakage or fluid remaining in the system.. Restart machinery carefully, confirming that safety measures are being implemented.. ontact SM if the product is to be used in any of the following conditions:. onditions and environments beyond the given specifications, or if product is used outdoors.. With fluids whose application causes concern due to the type of fluid or additives, etc.. n application which has the possibility of having negative effects on people, property, or animals, requiring special safety analysis. 8
11 Series VL Port Solenoid Valve for luid ontrol/precautions e sure to read before handling. Warning Precautions on esign. annot be used as an emergency shutoff valve, etc. The valves presented in this catalog are not designed for safety applications such as an emergency shutoff valve. If the valves are used in this type of system, other reliable safety assurance measures should also be adopted.. xtended periods of continuous energization ontact SM if valves will be continuously energized for extended periods of time.. Liquid seals In cases with a flowing liquid, provide a by-pass valve in the system to prevent the liquid from entering the liquid seal circuit.. This solenoid valve cannot be used for explosion protection.. Maintenance space The installation should allow sufficient space for maintenance activities (removal of valve, etc.). Warning Selection. onfirm the specifications. ive careful consideration to operating conditions such as the application, fluid and environment, and use within the operating ranges specified in this catalog.. luids efore using a fluid, confirm whether or not it is compatible by referring to the fluids listed in this catalog. Use fluids with a viscosity of no more than 0mm²/s (0cSt). onsult SM regarding any further questions.. luid temperature Operate within the fluid temperature range. The temperature range varies depending on the seal material, coil insulation and type of power supply, etc.. luid quality The use of fluid which contains foreign matter can cause problems such as malfunction and seal failure by promoting wear of the valve seat and core, and by sticking to the sliding parts of the armature, etc. Install a suitable filter (strainer) immediately upstream from the valve. s a general rule, use 80 to 00 mesh. aution. Leakage voltage Particularly when using a resistor in parallel with a switching element and using a -R element (surge voltage suppressor) to protect the switching element, take note that leakage current will flow through the resistor and -R element, etc., creating a danger that the valve may not shut O. Power supply Switching element O R Leakage current Leakage voltage Valve With coil 0% or less of rated voltage With coil % or less of rated voltage 9
12 Series VL Port Solenoid Valve for luid ontrol/precautions e sure to read before handling. Warning Mounting. If air leakage increases or equipment does not operate properly, stop operation. fter mounting is completed, confirm that it has been done correctly by performing a suitable function test.. o not apply external force to the coil section. When tightening is performed, apply a wrench or other tool to the outside of the piping connection parts.. o not warm the coil assembly with a heat insulator, etc. Use tape and heaters, etc., for freeze prevention on the piping and body only. They can cause the coil to burn out.. Secure with brackets, except in the case of steel piping and copper fittings.. void sources of vibration, or set the arm from the body to the minimum length so that resonance will not occur.. Instruction manual Mount the product after reading the manual carefully and understanding its contents. lso keep the manual where it can be referred to as necessary.. Painting and coating Warnings or specifications printed or pasted on the product should not be erased, removed or covered up. aution Piping. Preparation before piping efore piping is connected, it should be thoroughly blown out with air (flushing) or washed to remove chips, cutting oil and other debris from inside the pipe.. Wrapping of pipe tape When connecting pipes and fittings, etc., be sure that chips from the pipe threads and sealing material do not get inside the valve. urther, when pipe tape is used, leave. to thread ridges exposed at the end of the pipe/fitting. Winding direction xpose approx. threads Pipe tape. void connection of ground lines to piping, as this may cause electric corrosion of the system.. lways fasten threads with the proper tightening torque. When screwing fittings into valves, fasten with the proper tightening torques as shown below. Tightening torque for piping onnection threads Rc /8 Rc / Rc /8 Rc / Rc / Proper tightening torque N m to 9 to to 8 to 0 8 to 0. onnection of piping to products When connecting piping to a product, refer to its instruction manual to avoid mistakes regarding the supply port, etc. 0
13 Series VL Port Solenoid Valve for luid ontrol/precautions e sure to read before handling. aution Wiring. s a rule, use electrical wire of 0. to.mm². urther, do not allow excessive force to be applied to the lines.. Use electrical circuits which do not generate chattering in their contacts.. Use voltage which is within ±0% of the rated voltage. In cases with a power supply where importance is placed on responsiveness, stay within ±% of the rated value. The voltage drop is the value in the lead wire section connecting the coil.. When using class coils where the electrical circuit system does not allow solenoid surge, install a surge absorber, etc., in parallel with the solenoid. lectrical onnections aution onduit terminal In the case of the conduit terminal, make connections according to the marks shown below. "" mark + Round head combination screw M "+" mark View - (Internal connection diagram) Terminal cover Round head combination screw M lectrical ircuits aution lass onduit terminal There is polarity only when equipped with light. Note) Tighten the terminal cover mounting screws and terminal screws with a torque of 0.N-m. rommet/onduit W0 SM rommet, onduit, onduit terminal, IN connector circuit circuit ZNR ZNR Rectifying device ( ) ( + ) SOL. SOL. ( ) ( ) Rated voltage Lead wire color Without light Without light 00V 00V Other does not have polarity. : + + M lack lue Red ray Red lue Red ray IN connector Since internal connections are as shown below for the IN connector, make connections to the power supply accordingly. onduit terminal, IN connector ( + ) ( ) Light circuit With light ZNR ZNR ( ) SOL. ( ) Light circuit Rectifying device SOL. With light : lass rommet circuit ( ) Terminal No. SOL. IN terminal There is polarity only when equipped with light. Note) Tighten the IN connector mounting screws and terminal screws with a torque of 0.N-m. + ( ) Without light
14 Series VL Port Solenoid Valve for luid ontrol/precautions e sure to read before handling. Warning Operating nvironment. o not use valves in atmospheres of corrosive gases, chemicals, salt water, water or steam, or where there is direct contact with same.. o not use in an explosive atmosphere.. o not use in locations subject to vibration or impact.. o not use in a location where radiated heat will be received from a heat source in the vicinity.. mploy suitable protective measures in locations where there is contact with water droplets, oil or welding spatter, etc. Warning. Perform maintenance in accordance with the procedures in the instruction manual. Improper handling can cause damage or malfunction of equipment and devices, etc.. emounting of the product. Shut off the fluid supply and release the fluid pressure in the system.. Shut off the power supply. Maintenance. emount the product.. Low frequency operation Switch valves at least once every 0 days to prevent malfunction. aution. ilters and strainers. e careful regarding clogging of filters and strainers.. Replace filters after one year of use, or earlier if the amount of pressure drop reaches 0.MPa.. lean strainers when the amount of pressure drop reaches 0.MPa.
15 Series VL Specific Product Precautions e sure to read before handling. Refer to pages 8 through for safety instructions and precautions regarding port solenoid valve for fluid control. ow to Replace the Solenoid oil aution lip Replacement Parts Solenoid coil part numbers (lass ) VW 0 Solenoid coil lat head screw driver Insert a flat head screw driver into the hook section of the clip groove. Series lass lass lass Voltage 00V 00V 0V 0V V V 0V L O T TL Lead wire length Nil L L L L lectrical entry 00mm 00mm 000mm 00mm 000mm rommet IN connector IN connector with light or IN connector (without connector) onduit onduit terminal onduit terminal with light Tilt the screw driver down in direction so that the clip slides out in direction. Solenoid coil part numbers (lass ) VS Series lass lass lass Voltage 0 00V 00V 0V 0V 0V Lead wire length Nil L L L L lectrical entry rommet 00mm 00mm 000mm 00mm 000mm lip part numbers Z-T-VL Page Valve model ow to Order Valves Page Valve model Note) Indicate the valve model, as a label is attached to the clip. When the loosened clip is pulled out in direction using pinchers, etc., the coil can be removed and replaced in direction. fter replacing the coil, the clip is reinstalled by pushing it back in the direction opposite to its removal.
16 SM'S LOL MNUTURIN, ISTRIUTION N SRVI NTWORK UROP USTRI SM Pneumatik mb Z SM zech s.r.o. NMRK SM Pneumatik /S INLN SM Pneumatiikka OY RN SM Pneumatique S RMNY SM Pneumatik mb UNRY SM ungary Kft. IRLN SM Pneumatics (Ireland) Ltd. ITLY/ROMNI SM Italia S.p.. NTRLNS SM Pnuematics V. NORWY SM Pneumatics Norway /S RUSSI SM Pneumatik LL. SLOVKI SM Slovakia s.r.o. SLOVNI SM Slovenia d.o.c. SPIN/PORTUL SM spaña, S.. UROP SWN SM Pneumatics Sweden SWITZRLN SM Pneumatik. UK SM Pneumatics (U.K.) Ltd. SI IN SM (hina) o., Ltd. ON KON SM Pneumatics (ong Kong) Ltd. INI SM Pneumatics (India) Pvt. Ltd. MLYSI SM Pneumatics (S...) Sdn. hd. PILIPPINS SM Pneumatics (Philippines), Inc. SINPOR SM Pneumatics (S...) Pte. Ltd. SOUT KOR SM Pneumatics Korea o., Ltd. TIWN SM Pneumatics (Taiwan) o., Ltd. TILN SM Thailand Ltd. NORT MRI N SM Pneumatics (anada) Ltd. MXIO SM orporation (Mexico) S.. de.v. US SM Pneumatics, Inc. SOUT MRI RNTIN SM rgentina S.. OLIVI SM Pneumatics olivia S.R.L. RZIL SM Pneumaticos o razil Ltda. IL SM Pneumatics (hile) S.. VNZUL SM Neumatica Venezuela S.. ONI USTRLI SM Pneumatics (ustralia) Pty. Ltd. NW ZLN SM Pneumatics (N.Z.) Ltd. -- Shimbashi, Minato-ku, Tokyo 0-000, JPN Tel: ax: URL st printing July, 999 -SM.L.. P-00 () Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. Printed in Japan.
Series VC Direct Operated 2 Port Solenoid Valve for Oil. Series VCL VX VN VQ VDW VC LV PA
Series V irect Operated Port Solenoid Valve for Oil Series V VX VN V VW V V P.-9 Multipurpose Valve for Oil irect Operated Port Solenoid Valve for Oil Series V Kerosene, uel oil class (fuel oil ), Silicone
More informationCAT.ES70-22 A. Series VC. Direct Operated 2 Port Solenoid Valve for Heated Water. Series VCB
CAT.ES0- A Series VC Direct Operated Port Solenoid Valve for Heated Water Series VCB Multipurpose Valve for Heated Water Direct Operated Port Solenoid Valve for Heated Water Series VCB Improved durability
More informationCompact Direct Operated 2/3 Port Solenoid Valve for Water and Air
Compact Direct Operated / Port Solenoid Valve for Water and Air 0/0/0: Port, 00/00: Port 0/0/0 -port type has been remodeled to new compact and lightweight series. For details about new series, refer to
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More information1.3 x % reduction 18% High Vacuum Solenoid Valve. XSA Series CAT.ES140-7B. 5 to 60 C
Normal lose igh Vacuum Solenoid Valve Minimum operating pressure x0 * 6 Pa(abs) * OUT side * * Excluding grommet/ RoS Leakage Internal.3 x0 9 Pa m3/s External.3 x0 Pa m3/s Max. Max. Power consumption 5%
More informationCoolant Valve. VNC Series. Cylinder actuation by pilot air
oolant VN Series ir Operated/xternal Pilot Solenoid [Option] ylinder actuation by pilot air Wide selection of port and variations Threaded type (6 to ) lange type (3 to 80) Low water hammer or details,
More informationHigh Vacuum Solenoid Valve. 25% reduction. Max. Weight. 18% * lighter. Max. * XSA2-2 AC 100 V, 200 V, 110 V, 220 V, 240 V, 48 V, 24 V, 230 V DC
Normal lose High Vacuum Solenoid Valve Minimum operating pressure * 1x10 6 Pa(abs) * OUT side Leakage Internal 1.3 x10 9 Pa m3/s Note) Note) Except grommet/ RoHS External 1.3 x10 11 Pa m3/s 2 types of
More informationSoft Start-up Valve. AV2000/3000/4000/5000 Series
Soft Start-up Valve V000/000/000/000 Series [Option] C- R- W- C R - W - Start-up valve for low speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off
More informationIP65. Compact Direct Operated 2 Port Solenoid Valve. VDW Series. Aluminum Resin(PPS) g. Brass Stainless Steel. 15 mm mm
ompact irect Operated Port Solenoid Valve Series RoHS ir Medium Water vacuum Lightweight 80 g 00 luminum/resin(pps) body () ompact ody material luminum Resin(PPS) g ir urrent rass body () Water urrent
More informationSeries AV2000/3000/4000/5000
Soft Start-up Valve Series AV/3/4/5 Series introduced! A start-up valve that gradually increases supply pressure during start up and rapidly exhausts system air when the supply air is shut off AC AV AU
More informationCompact / Lightweight 2 Port Solenoid Valve
ompact / Lightweight 2 Port Solenoid Valve /-XF For ir/water ompact / Lightweight resin body (PPS) Weight: 20 g (-XF) RoHS IP65 mm Power consumption 3 W (Standard) 0.5 W (With power-saving circuit) 48
More informationDiscrete direct acting 2 port solenoid valve (general purpose valve) AB31 AB41 Series NC (normally closed) type AB42 Series NO (normally open) type
31414 Series iscrete direct acting port solenoid valve (general purpose valve) 31 41 Series NC (normally closed) type 4 Series NO (normally open) type Port size: Rc1/8 to Rc1/ JIS symbol Common specifications
More informationZero Differential Pressure Type Pilot Operated 2 Port Solenoid Valve
Zero ifferential Pressure Type Pilot Operated Port Solenoid Valve For ir, Water, Oil Reduced power consumption ( spec.) 7W VXZ:. W 0. W VXZ: 8 W New VX Z Series VXZ/ T.ES70- Solenoid valves for various
More informationCoolant valve. SGC/SGH Series
Doc. no. PRODUCT NAME Coolant valve MODEL / Series / Product Number SGC/SGH Series Contents Safety Instructions ------------------------------------------------------------------------------------- 2,3
More informationHigh Vacuum Solenoid Valve PRODUCT NAME. XSA Series MODEL/ Series
Doc. No. High Vacuum Solenoid Valve PRODUCT NAME XSA Series MODEL/ Series Thank you for purchasing this SMC product. Be sure to read this Operation Manual carefully and understand its contents before operating
More informationHow to Order Valve. Body type. Symbol Body type B Base mounted with screws 10 S070 B 5 B G 10 S070 C 5 B G 32. Body type.
Series -S00 ompact Direct Operated Port Solenoid Valve ontrol Valves ase mounted ody ported lean Series lean Series V S R oil voltage 24 VD VD VD VD VD Power consumption Pressure specification Flow rate
More informationDoc. no.vn-omm0001-c. Coolant valve PRODUCT NAME. VNC/VNH Series MODEL / Series / Product Number
Doc. no. Coolant valve PRODUCT NAME VNC/VNH Series MODEL / Series / Product Number Contents Safety Instructions ---------------------------------------------------------------------------------- 2,3 Precautions
More informationHigh Vacuum Solenoid Valve PRODUCT NAME. XSA Series MODEL/ Series
Doc. No. High Vacuum Solenoid Valve PRODUCT NAME XSA Series MODEL/ Series Thank you for purchasing this SMC product. Be sure to read this Operation Manual carefully and understand its contents before operating
More informationCoolant Valve. Air Operated/External Pilot Solenoid
Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) lange type (3 to ) Low water hammer or details, refer to page
More informationDiscrete direct acting 3 port solenoid valve (general purpose valve) AG31/AG41 Series. Universal type Port size: Rc1/8, Rc1/4, Rc3/8
G3141 Series iscrete direct acting 3 port solenoid valve (general purpose valve) G31/G41 Series Universal type Port size: Rc1/8, Rc1/4, Rc3/8 JIS symbol G31/41: Universal type COM NO NC Common specifications
More informationHow to Order 1 T Z A. r Pressure range. 05 Pressure range 0 to 0.5 MPa 10 Pressure range 0 to 1 MPa 16 Pressure range 0 to 1.6 MPa
oolant Valve Series S External pilot solenoid S ir operated S How to Order 0 0 Y 0 0 T Z q w e r t y u i o!0!!!!! q Series S00 S00 S00 w Valve type ormally closed ormally open e Seal material R FKM r Pressure
More informationPilot Operated 2 Port Solenoid Valve for Dry Air
Pilot Operated Port Solenoid Valve for Dry ir VQ0/30 Series Compact and lightweight with large flow capacity [Option] VQ0 Weight (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series VQ0 Series VCH VDW SX0
More informationNormally Closed Type High Vacuum Straight Solenoid Valve. How to Order XSA S 5 G. Fitting size. Fitting Type
Series XS Normally losed Type igh Vacuum Straight Solenoid Valve ow to Order [Option] Normally closed high vacuum straight solenoid valve XS 1 1 S Solenoid size 1 No.1 No. No. 1 Orifice symbol ø ø ø4.
More informationCoolant Valve. Series VNC. Cylinder actuation by pilot air. Wide selection of port size and variations
Coolant Valve ir Operated/xternal Pilot Solenoid Cylinder actuation by pilot air Wide selection of port and variations hreaded type (6 to ) type (3 to ) Low water hammer or details, refer to page 07. Large
More informationVNA Application example. 3-port dual pressure, N.C. type SGH. Nozzle SGH. Coolant pump
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
More informationDoc. no.vn -OMA0002-D. Process valve PRODUCT NAME. VNA Series MODEL / Series / Product Number
Doc. no. Process valve PRODUCT NAME VNA Series MODEL / Series / Product Number Contents Safety Instructions ---------------------------------------------------------------------------------- 2,3 Design
More informationDiscrete direct acting 3 port solenoid valve (general purpose valve) NC pressurization type. Port size: Rc1/8, Rc1/4, Rc3/8
iscrete direct acting 3 port solenoid valve (general purpose valve) 33/43 Series pressurization type Port size: Rc1/8, Rc1/4, Rc3/8 Refer to nding 17 for more details. JIS symbol 33/43: pressurization
More information3 Port Solenoid Valve
Rubber Seal Port Solenoid Valve Series Manifold Single Unit ase Mounted Manifold VV01 V100 ar base P.18 ody Ported P.10 ase Mounted P.10 VQD VKF VK VT VS Separable base ody Ported Manifold P.1 Stacking
More information20% More flow 10% Smaller 30% Lighter
irect Operated Port Solenoid Valve New low rate ody material ir luminum, esin Water/Oil/ Medium vacuum (rass), Stainless steel ir arge flow rate Medium vacuum ompact Height onventional model Water VX ightweight
More information2 Port Solenoid Valve/Air Operated Valve For Dust Collector
2 Port olenoid Valve/ir Operated Valve or ust ollector eries /VX2 Large port size is available. 50 to 00 added lange type Mounting can be changed depending on the piping conditions. Piping lange type,
More informationMechanical Style Pressure Switch. Specifications
or details about certified products conforming to international standards, visit us at www.smcworld.com. Mechanical Style Pressure Switch Series IS1000 Long service life: 5 million cycles IS1000-01 IS1000-01-X202
More information10 VQ F. Nil Latching type: Push-locking type (Tool required) B. Nil. Electrical entry
Series 0-VQ00 port solenoid valve How to Order Valves 0 VQ 0 F ir cylinder Clean series Series VQ Compact port valve Type of actuation Normally closed Note) Normally open Note) Normally open type is available
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More informationDiscrete direct acting 3 port solenoid valve (general purpose valve) Universal type Port size: Rc1/8, Rc1/4, Rc3/ to to 60 B
G31/41 Series iscrete direct acting 3 port solenoid valve (general purpose valve) G31/41 Series Universal type Port size: Rc1/8, Rc1/4, Rc3/8 Refer to nding 17 for more details. JIS symbol G31/41: Universal
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More information3 million cycles. High Pressure Coolant Valve. SGH Series W (24 VDC) (With light/surge voltage suppressor: 0.58 W)
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
More information2 Port Valve For Compressed Air and Air-hydro Circuit Control. Exclusively for air pressure system and air-hydro circuit control
Process Valve Port Valve For Compressed ir and ir-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Valve [Option] Cylinder actuation by external pilot
More information2 Port Solenoid Valve/Air Operated Valve For Dust Collector. Large port size is available. Flange body type
2 Port olenoid Valve/ir Operated Valve For ust ollector New pplicable for high temperature Fluid temperature 100 Large port size is available. 50 to 100 nclosure P65 lectrical entry flat terminal type
More information2 Port Solenoid Valve/Air Operated Valve For Dust Collector
2 Port olenoid Valve/ir Operated Valve or ust ollector VX2/VX2 eries o pplicable for high temperature luid temperature 100 lange type Mounting can be changed depending on the piping conditions! Large port
More informationExclusively for air pressure system and air-hydro circuit control
Process Valve Series Port Valve For Compressed ir and ir-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Valve [Option] Cylinder actuation by external
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 MPa Pilot Operated / Port Solenoid Valve & Check Valve Series VCH VCH4/4: Port VCH40: Port VCHC40: Check Valve Pilot Operated Port Solenoid Valve Series VCH40 Stable responsiveness Response time dispersion
More informationGENERAL PURPOSE VALVE AB31 AB41 AB42 SERIES Discrete valve. Direct acting poppet structure Port size : Rc1/8, Rc1/4, Rc3/8, Rc1/2.
Series port direct acting solenoid valve : Open when energized, close when energized NRL PURPOS VLV SRIS iscrete valve irect acting poppet structure Port size : Rc/, Rc/, Rc/, Rc/ JIS symbol / (normally
More information1.0 cm 3 /min. Pilot Operated 2-Port Solenoid Valve/ Zero Pressure Differential Operation Series VXS22/23. Compact and Lightweight mm.
Pilot Operated -Port Solenoid Valve/ Zero Pressure Differential Operation Series VXS/ Compact and Lightweight Enclosure: IP65 Low-noise construction Operation noise is reduced due to full wave rectifier
More informationHigh Pressure Coolant Valve
High Pressure Coolant Valve Series.5 MPa, 7.0 MPa Corresponding to high speed grinding and long drilling processes Coolant valve for high pressure coolant liquid (up to.5 MPa or 7.0 MPa) that is ideal
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 MPa Pilot Operated /3 Port Solenoid Valve & Check Valve VCH Series VCH4/4: Port VCH40: 3 Port VCHC40: Check Valve Pilot Operated Port Solenoid Valve [Option] VCH40 Series Stable responsiveness Response
More informationITVX Series. Stepless control of air pressure proportional to an electrical signal. Supply pressure: 5.0 MPa
5.0 MPa Maximum Supply Pressure High Pressure Electro-Pneumatic Regulator X Series This product is only for blowing gas. This product does not have sufficient pressure control for other applications (driving,
More information5 Port Solenoid Valve Direct Operated Poppet Type. Specifications
Port Solenoid Valve Direct Operated Poppet Type 000 Series Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W
More informationAir Suction Filter / In-line Type With One-touch Fittings. Model ZFC ZFC ZFC ZFC ZFC ZFC ZFC ZFC051-03
In-line type air suction filter is used to prevent vacuum equipment trouble from occurring due to dust in the air IN/OUT straight piping Easy installation and removal with one-touch fittings Light and
More informationVXP21/22/23 Series. Pilot Operated 2 Port Solenoid Valve. For Air, Gas, Steam, Water and Oil VX2 VXK VXD VXZ VXS VXB VXE VXP VXR VXH VXF VX3 VXA
Pilot Operated Port Solenoid Valve VXP//3 Series For ir, as,, Water and Oil Variations.O..C. Wide variations of combination. ble to control a wide variety of fluids. Valve can be matched to particular
More informationSeries VKF300 VV061 V100 S070 VQD VKF VK VT VS
Rubber Seal 3 Port Solenoid Valve Series VKF300 Direct Operated Poppet Type Compact yet provides a large flow capacity Body width 18 mm Various manifold piping directions Output port: Manifold set-up allowing
More informationNAMUR Interface 5 Port Solenoid Valve
NAMUR Interface 5 Port Solenoid Valve Series VFN000N 5 5 Specifications Valve Electrical entry Fluid Max. operating pressure Min. operating pressure Ambient and fluid temperature Lubrication Pilot operator
More informationHigh Purity Fluoropolymer Fittings & Tubing
CT.S70-17 igh Purity Fluoropolymer Fittings & Fittings Series Q Series T/TI U.S. Pat.,, SC high purity series responding to the latest demands in process control igh Purity Fluoropolymer Fittings & Fittings
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time
More information1.8 w Port Solenoid Valve Direct Operated Poppet Type. New. Series VT307 CAT.ES11-107A. Power consumption
Port Solenoid Valve Direct Operated Poppet Type Power consumption Vacuum applications New [Option] RoHS 4 Standard wtype (Existing product: 4.8 W) 0. kpa Energy-saving type.8 w (Existing product: W) A
More information3 Port Solenoid Valve Direct Operated Poppet Type. Body type. T Body ported O Manifold. Valve option
3 Port Solenoid Valve Direct Operated Poppet Type VT317 Series Rubber Seal [Option] Note) CE-compliant: Electrical entry is applicable only for the DIN terminal. Compact yet provides a large flow capacity
More informationVacuum / Release Unit
Rubber Seal Vacuum / Release Unit Series VQD1000-V Response speed 13 msec (at 500 mm )/18.5 msec (at 1000 mm ) Distance from the unit to the work area Smooth detachment of a work piece without over-blow
More information1.8 w. 3 Port Solenoid Valve. VT307 Series. Direct Operated Poppet Type. Power consumption. A single valve with various valve functions
Port Solenoid Valve VT07 Series Direct Operated Poppet Type Power consumption 4 Standard wtype (Current product: 4.8 W) Energy-saving type.8 w (Current product: 2 W) Vacuum applications 0.2 kpa [Option]
More informationPilot Operated/Zero Pressure Differential Operation
ilot Operated/Zero ressure ifferential Operation 2 ort Solenoid Valve Series Z Change of valve style from.c. to.o. is simple. xcellent maintainability Separation of movable iron core and diaphragm valve
More informationSteam Valve. Series VND. 2 Port Valve for Steam. With indicator (Option) By adopting of PTFE seal, the valve is suited for steam.
Steam Valve Series VN Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
More information5 Port Solenoid Valve Direct Operated Poppet Type. Specifications
Port Solenoid Valve Direct Operated Poppet Type Series 000 Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W
More informationGeneral purpose direct acting 2, 3 port solenoid valve
eneral purpose direct acting, 3 port solenoid valve (eneral purpose valve) eneral purpose Direct acting, 3 port solenoid valve / Pilot operated/pilot kick type port solenoid valve P/D/PK/DK Page 9 9 P/
More informationInstallation and Maintenance Manual VXZ Zero Pressure Differential Type Pilot Operated 2 Port Solenoid Valve
2 Specifications Installation and Maintenance Manual VXZ Zero Pressure Differential Type Pilot Operated 2 Solenoid Valve For Air, Water, Oil, Heated Water, High Temperature Oil 1 Safety Instructions This
More information5 Port Direct Operated Poppet Solenoid Valve, Rubber Seal
Port Direct Operated Poppet Solenoid Valve, Rubber Seal Series 3000 or details about certified products conforming to international standards, visit us at www.smcworld.com. C: 0.4 dm 3 /(s bar) (Passage
More informationVNA VNB SGC SGH VNC VNH VND VCC
Steam Valve VN Series Valve for Steam Valve for Steam Max. 80 y adopting of PT seal, the valve is suited for steam. ody material: ronze, Stainless steel Large valve capacity With indicator (Option) Selectable
More information3 Port Solenoid Valve Direct Operated Poppet Type
3 Port Solenoid Valve Direct Operated Poppet Type VK300 Series Rubber Seal [Option] Universal porting Available for N.C. valve, N.O. valve, divider valve, selector valve, etc. C: 0.80 dm 3 /(s bar) (Passage
More information5 Port Solenoid Valve: Base Mounted Metal Seal/Rubber Seal. High speed & Long life. (Metal seal, with light and surge suppressor) 100 million cycles
ort Solenoid Valve: ase Mounted Metal Seal/Rubber Seal Series Space and capacity saving ilot valve is gathered at one side. Space saving design which does not have any protrusions. Space saving Capacity
More informationPilot Operated 2 Port Solenoid Valve for Dry Air
Pilot Operated Port Solenoid Valve for Dry Air Series VQ0/30 Compact and lightweight with large flow capacity VQ0 Mass (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series VQ0 High frequency operation possible
More information13 msec (at 500 mm )/18.5 msec (at 1000 mm )
Vacuum / Release Unit Series VQD1000-V Rubber Seal Response speed 13 msec (at 500 mm )/18.5 msec (at 1000 mm ) Distance from the unit to the work area [Option] Smooth detachment of a work piece without
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 MPa Pilot Operated / Port Solenoid Valve & Check Valve Series VCH VCH4/4: Port VCH40: Port VCHC40: Check Valve Pilot Operated Port Solenoid Valve Series VCH40 Stable responsiveness Response time dispersion
More information3 Port Direct Operated Poppet Rubber Seal. Standard Continuous duty Energy saving Vacuum Energy saving/vacuum
3 Port Direct Operated Poppet Rubber Seal Series 307 Large Flow Capacity, yet Compact Size. Dimensions (W X H X D) 30 X 54.5 X 33 307 Nl/min 206.02 or more, 1/4 Low Power Consumption /VO307 4.8W DC/Standard
More informationHow to Order. Nozzle. Nil Connection size N02 N03 F02 F H06 H08 H10 H07 H09 H11
Blow Gun RoHS How to Order VMG W Blow gun Standard type Series Resin body lever type W BU Piping entry Bottom Top Body color White ark blue Symbol Nil 3 4 3 3 4 3 3 33 34 Male High efficiency Low noise
More informationNon-Contact Sensor for Workpiece Placement Verification
ir Catch Sensor Series 2 Non-Contact Sensor for Workpiece Placement Verification Stable detection of. to. mm clearance Due to the pneumatic bridge circuit and semiconductor pressure sensor, the non-contact
More information1 1/4 (32A) to 2 (50A) added.
Coolant Valve 0.5 MPa.0 MPa.6 MPa RoHS /4 (3) to (50) added. Flow rate Cv (For 0.5 MPa specification) 3 4 5 0 0 30 Cv (kv) 40 5 million cycles or more Port size 70 6.5 (5.6) 3/8 (0), / (5).8 (0.) 3/4 (0)
More informationWear Resistant Tubing
Wear Resistant Tubing New RoHS 1/ Abrasion: Approx. (Compared with SMC polyurethane tubing TU series) 3 Description Wear resistant tubing TUZ series Polyurethane tubing TU series Maximum abrasion (mm)
More informationPilot operated 2 port solenoid valve (general purpose valve) AP11/AP12 Series. Air, water, kerosene, oil (50 mm 2 /s or less) -10 to to 60 B
Pilot operated port solenoid valve (general purpose valve) P/P Series NC (normally closed) type, NO (normally open) type Port size: Rc/4 to Rc Piston structure Refer to Ending 7 for more details. JIS symbol
More informationKV series. Innovatively detachable Manifold Block. Smart Solenoid Valve (plug-in type, D-SUB multi-connector type)
CAT.1101E-S www.sym1.com KV series Innovatively detachable Manifold Block (DIN Rail Mounting) Smart Solenoid Valve (Plug-in type, D-SUB multi-connector ) Compact size with large flow capacity Exceedingly
More informationHVB/HVL. Solenoid valve for high vacuum. For vacuum, inert gas, air, nitrogen CONTENTS. Overview
HV/HVL For vacuum, inert gas, air, nitrogen HN/G US/G F/G Overview dvanced technology, such as stability in the leak amount (vacuum holding force) and increased seal life, is required when the degree of
More information5.0 MPa Pneumatic Equipment Series
CAT.ES70-7 B 5.0 MPa Pneumatic Equipment Series Pressure switch Regulator Solenoid valve (/3 port) Check valve Silencer For air-blowing, cylinderdriving, charging fluid into a tank, or discharging. Exhaust
More information3 Port Solenoid Valve Pilot Operated Poppet Type. External pilot
3 Port Solenoid Valve Pilot Operated Poppet Type Series VG342 Rubber Seal [Option] Low power consumption 4.8 W DC (Standard type) 2 W DC (Energy-saving type) No lubrication required Possible to use in
More informationPressure Relief 3 Port Valve With Locking Holes
Doc. No. VH*-OMQ0023-B PRODUCT NAME Pressure Relief 3 Port Valve With Locking Holes MODEL / Series / Product Number VHS20-(F,N)01~02A,B(-B,S)(-K,R,Z) VHS30-(F,N)02~03A,B(-B,S)(-K,R,Z) VHS40-(F,N)02~04A,B(-B,S)(-K,R,Z)
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 MPa Pilot Operated / Port Solenoid Valve & Check Valve Series VCH VCH4/4: Port VCH40: Port VCHC40: Check Valve Pilot Operated Port Solenoid Valve Series VCH40 Stable responsiveness Response time dispersion
More informationPilot Operated 2-Port Solenoid Valve/ Zero Pressure Differential Operation
Pilot Operated 2-Port Solenoid Valve/ Zero Pressure Differential Operation For Steam Compact and Lightweight New Enclosure: IP65 Low-noise construction Operation noise is reduced due to full wave rectifier
More informationSeries LVQ. Constructed without screws. Air Operated Chemical Valve Non-Metallic Exterior. Space Saving Type
ir Operated hemical alve on-etallic Exterior Series LQ onstructed without screws on-metallic construction without using metal screws to fasten the body of the actuator. ody section Integral fitting construction
More information1 1/4 (32A) to 2 (50A) added.
Coolant Valve 0.5 MPa.0 MPa.6 MPa /4 (3) to (50) added. RoHS IP65 compliant For pilot valve V6 Flow rate Variations New Series SC SC3 SC4 SC5 Cv (kv) 5 0 0 30 40 70 6.5 (5.6) Cv (For 0.5 MPa specification).8
More informationSeries VP3145/3165/3185
Large flow capacity, small exhaust resistance (Refer to Flow Characteristic table.) Easy conversion to N.C. or N.O. N.C. N.C. X (P) N.O. N.O. X (P) Series VP 3 port Function plate makes it possible to
More informationAdded 100 mm and 150 mm lengths. Actuators 10% Air leakage 20% Air blow 70% Current model
Blow Gun Series 20% reduction in power consumption with the SMC Blow gun + S coupler + Coil tube 10% reduction with the Blow gun () only RoHS With cover Extension nozzle Added mm and 150 mm lengths Pressure
More informationAir Catch Sensor. Non-Contact Sensor for Workpiece Placement Confirmation
Air Catch Sensor Non-Contact Sensor for Workpiece Placement Confirmation Stable detection of. to. mm clearance Due to the pneumatic bridge circuit and semiconductor pressure sensor, the non-contact type
More informationVacuum applications possible (up to 100kPa) Base mounted. Cylinder bore size (mm) Series CM2. Pressure: 0.5MPa Load ratio: 50% Cylinder stroke: 300mm
4 Port Direct Operated Poppet Solenoid Valve Series D1000 High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure
More information3 Port Solenoid Valve Direct Operated Poppet Type 02 1 G VT325. For manifold: Enter VO. Valve option. Nil Standard V For vacuum Option.
3 Port Solenoid Valve Direct Operated Poppet Type Series VT325 Rubber Seal [Option] Note) Applicable only for DIN terminal type. Compact yet provides a large flow capacity Dimensions (W x H x D) 55 x 118
More informationCAT.ES B. 2-Color Display Type High-Precision Digital Pressure Switch. Series ZSE30/ISE30. Improved, easy-to-read 2-color display
CAT.ES100-42 B 2-Color Display Type High-Precision Digital Pressure Switch Series ZSE30/ISE30 Improved, easy-to-read 2-color display 2-Color Display Type High-Precision Digital Pressure Switch Series ZSE30/ISE30
More informationPilot Operated 2 Port Solenoid Valve
CT.EUS0-9 -UK Pilot Operated Port Solenoid Valve For Water, Oil, ir Reduction of power consumption (DC specification) 6 W.5 W/5.5 W (VXD0 to 50) W W (VXD0).5 W 0.5 W ew VX D D D Series VXD// Solenoid valves
More informationNO (normally closed) type Common supply type (port C pressurization) MPa MPa MPa C C
Direct acting port solenoid valve, manifold and actuator (general purpose valve) NO (normally closed) type Common supply type (port C pressurization) Manifold circuit structure Common specifications B
More informationBody width of 10mm, Nl/min (49.08) 2W (Standard) Nl/min (78.52) 4W (U type: Large flow) Vacuum applications possible (up to 100kPa) 3 S.
High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure of 0.5MPa, subject to clean, dry air) 4 Port Direct
More informationVX Z. Zero Differential Pressure Type Pilot Operated 2 Port Solenoid Valve VXZ22/23. For Air, Water, Oil. New. Series
Zero Differential Pressure Type Pilot Operated Port Solenoid Valve For Air, Water, Oil Reduced power consumption ( spec.) VXZ: 8 W 7 W VXZ:.5 W.5 W New VX Z Z Series VXZ/ CAT.ES7-A Solenoid valves for
More informationSeries DV
Series DV00 3000 4000 5port Pilot Solenoid Valve Quick response time & large flow capacity Response time is less than 1ms (DV00) Increase of CV factor(.5 times larger than conventional valve with the same
More informationSeries CKZN. Slim Line Power Clamp Arm -X6013 PDF300A
Series KZN Slim Line ower lamp rm X603 300 ow to Order 603 rms mm ore imensions mm ore imensions KZN lamp Reference ctuator recautions ctuator recautions 2 Specific roduct recautions X603 rms ore Size
More information3 Port 3 Position Valve
Port Position Valve Pilot Solenoid ir Operated ohs Intermediate stopping of cylinders * up to ø15 is possible. Pilot solenoid Manifold ir operated * For VEX 4, 00 mm/s, horizontal movement Power consumption:
More information2 port pilot operated solenoid valve
General purpose solenoid valve port pilot operated solenoid valve KZV3 Series General purpose solenoid valve for steam and water Features Heat-resistance and water-proof molded coil are used (heat resistance
More informationCompact Proportional Solenoid Valve
Compact Proportional Solenoid Valve Series Repeatability: % or less Hysteresis:1% or less Fluid Flow rate control range Note) Series Air, Inert gas to L/min to L/min Note) Varies depending on the model.
More informationPilot kick type 2 port solenoid valve for dry air (general purpose valve) ADK11-Z Series. NC (normally closed) type
Pilot kick type 2 port solenoid valve for dry air (general purpose valve) DK11-Z Series NC (normally closed) type Port size: Rc1/4 to Rc1 Diaphragm structure JIS symbol NC (normally closed) type OUT IN
More information