Model Note) Rated flow (l/min (ANR)) Port size Mass (kg) 1 8, , 3 8. Specifications Fluid

Transcription

1 Water Separator RoHS Can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element that is exclusively used for removing water droplets and the ample housing interior space, a % water removal rate has been achieved. Caution Water separator can remove water droplets, but it cannot remove moisture. Condition of inlet air Pressure: 0.7 MPa Temperature: 25 C Relative humidity: 0% Liquid water content (Water droplet content): g/m 3 (ANR) Compressed air flow: Rated flow of each model Water removal rate (%) = Removed water (Water droplet) (g) x 0 Inflowed water (Water droplet) (g) Modular connection is possible with 0C to 550C. (For details, refer to page 4.) Model Model 0C 250C 350C 450C 550C Note) Rated flow (l/min (ANR)) Port size Mass (kg) 1 8, , , , , , , 2.5 Note) Max. flow at 0.7 MPa. Max. flow varies depending on the operating pressure. Refer to Flow Characteristics (page 148) and Maximum Air flow (page 14). Specifications Fluid Compressed air Max. operating pressure 1.0 MPa Min. operating pressure 0.05 MPa Proof pressure 1.5 MPa Ambient and fluid temperature 5 to 0 C Water removal rate % Element life 2 years or when pressure drop reached 0.1 MPa With auto drain: 0.1 MPa (N.O. type) or 0. MPa (N.C. type) Accessory Applicable model Bracket assembly (with 2 mounting screws) Caution 0C 250C 350C 450C 550C AM-BM1 AM-BM2 AM-BM3 AM-BM4 AM-BM5 BM5 BM57 Be sure to read before handling. Refer to front matters 42 and 43 for Safety Instructions and pages to 8 for Air Preparation Equipment Precautions. HAA HAW AT IDF IDU IDFA IDFB ID IDG AFF AM AMD AMH AME AMF SF SFD LLB AD GD 0C to 550C 50/850 (Drain cock specifications) (Auto drain specifications) Made to Order (For details, refer to page 2.) 145

2 How to Order 0C to 550C 550C Body size 0C 250C 350C 450C 550C Thread type Type Rc F G 1 N NPT 1 Conforms to ISO Port size Applicable body size Size 0C 250C 350C 450C 550C 1/8 1/4 3/8 1/2 3/4 1 Accessory B Bracket 2 2 Bracket is included, (but not assembled). 3 The model with bracket is not available for -X. Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) X X2 With - flange 3 N.C., N.O. auto drain, drain piping type Option 4 F Rubber material: Fluororubber H For medium air pressure (1. MPa) J Drain guide 1/4 female threaded 5 R - reversal direction V Degreasing wash, white vaseline 5 Drain piping and piping for a stop valve such as ball valve are required. Only body/housing is degreasing washed. Page for details P.212 P.213 Auto drain 4 Drain cock (Without auto drain) C N.C. auto drain D N.O. auto drain 4 Refer to Drain Exhaust Specifications/ Option Combinations. (Only one drain exhaust method can be selected.) Drain Exhaust Specifications/Option Combinations : All types of drain exhaust specifications are available. (including drain guide, J specification) : N.C. auto drain ( C specification) is not available. : Both N.C. and N.O. auto drain ( C, D specification) are not available. F H R V : Not available F H R V Options F: Rubber material: Fluororubber Fluororubber is used for the parts such as O-ring and gasket. H: For medium air pressure (1. MPa) Can be used up to 1. MPa at maximum. J: Drain guide 1/4 female threaded Can be pipied to the drain exhaust port. 1/4 female threaded R: - reversal direction Air flow in the separator is changed to right to left. (Air flow direction of the standard: Left to right.) V: Degreasing wash, white vaseline Body/housing is degreasing washed. The lubrication grease for O-ring and gasket is changed to white vaseline. 14

3 Water Separator How to Order 50/ Body size Thread type Type Rc F G N NPT Size Port size Applicable body size Accessory B Bracket Bracket is included, (but not assembled). 2 The model with bracket is not available for -X. Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) X X2 X12 Auto drain 3 Drain cock (Without auto drain) 4 D N.O. auto drain 3 Refer to Auto Drain Specifications/Option Combinations. 4 Body size 850 is equipped with a ball valve (Rc 3/8 female threaded). Mount a piping adapter IDF-AP0 (page 5) to the ball valve if NPT 3/8 female threaded is required. Auto Drain Specifications/Option Combinations Auto drain specifications/option Auto drain specifications Option N.O. auto drain Drain guide reversal direction D J R With - flange 2 N.C., N.O. auto drain, drain piping type White vaseline Option 3 J Drain guide 1 4 female threaded 5 R - reversal direction 5 Drain piping and piping for a stop valve such as ball valve are required. Note) Element service indicator (symbol: T) is not available as an option because water deposits inside the indicator could lead to malfunctions. Page for details P.212 P.213 P.213 Note) Refer to How to Order Bowl Assembly on page. : Available : Not available Auto drain specifications Option Applicable model D J R HAA HAW AT IDF IDU IDFA IDFB ID IDG AFF AM AMD AMH AME AMF SF SFD LLB AD GD 147

4 Flow Characteristics (Representative values) Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. 0C 450C 850 Air flow rate (m 3 /min (ANR)) 250C 550C 350C

5 Water Separator Construction 0C to 550C, 50 q 850 Component Parts No No. 4 Material Note Body Aluminum die-casted Chrome treated Aluminum die-casted Epoxy coating on Housing inner surface Sight glass Tempered glass The 850 is aluminum casted. Replacement Parts Material Element assembly Resin, others Applicable model Except option F For option F Maximum Air Flow 0C -EL0 -EL0-F 250C -EL250 -EL250-F 350C -EL350 -EL350-F Note) Refer to How to Order Bowl Assembly on page. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction. Refer to dimensions on pages 0 to 2 for details. Model 450C -EL450 -EL450-F Element assembly: With gasket (1 pc.) and O-ring (1 pc.) Refer to back page 21 for replacement of auto drain. Element assemblies for Made to Order (X12, X, X2) are same as those for standard (see the above table). Max. air flow rate (m 3 /min (ANR)) r w e Model Selection 550C -EL550 -EL550-F 50 -EL EL850 Select a model in accordance with the following procedure taking the inlet pressure and the max. air flow rate into consideration. (Example) Inlet pressure: 0. MPa Max. air flow rate: 5 m 3 /min (ANR) 1. Obtain the intersecting point A of inlet pressure and max. air flow rate in the graph. 2. The 50 is obtained when the max. flow line is above the interecting point A in the graph. Note) Make sure to select a model that has the max. flow line above the obtained intersecting point. With a model that has the max. flow line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. HAA HAW AT IDF IDU IDFA IDFB ID IDG AFF AM AMD AMH AME AMF SF SFD LLB AD GD Inlet pressure (MPa) 14

6 Dimensions 0C to 550C P Q Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) F R O S Drain cock Gray: N.C. Black: N.O. 34 ø One-touch fitting D I Combination of D: With auto drain (N.O.) and H: For medium air pressure K U T L M øv Bracket (Accessory) N H C J A E B Note) 1/4 female threaded Note) for 250C. Width across flats 17 Option J: Drain guide 1/4 female threaded G Maintenance space Drain port M5 Width across flats 24 1/4 female threaded Model 0C 250C 350C 450C 550C Port size 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 A B C D E F G H I J K T 7 Bracket related dimensions U L M V N O P Q R (mm) S

7 Water Separator Dimensions 50 Auto drain D: With auto drain (N.O.) Drain cock: Black HAA HAW AT IDF IDU ø One-touch fitting IDFA IDFB 10 Option J: Drain guide 1/4 female threaded ID IDG 11 0 Bracket (Accessory) 85 AFF AM Width across flats 24 1/4 female threaded AMD AMH AME AMF SF SFD LLB Maintenance space Drain port M5 AD GD 1

8 Dimensions 850 Auto drain 2 1 D: With auto drain (N.O.) for Bracket (Accessory) /8 female threaded Maintenance space Drain Rc 3/8 female threaded 2