Air / Mist / Micro mist filter. Air Treat ent Unit

Transcription

1 Air / Mist / Micro mist filter Air Treat ent Unit

2 CONTENTS WATER SEPARATOR PRECISION FILTER Page 4 MAMG Water separator Page 6 Page 8 Page 1 Page 12 MAMB MAMD MAMM MAMF 3 μm.3 μm.1 μm.1 μm + Deodorization Page 17 MAF32 D/M 3 μm /.1 μm Page 18 MAF51 D/M 3 μm /.1 μm Page 2 MAF41 A/D/M 5 μm / 3 μm /.1 μm Page 22 Page 23 MAFF41 AD/DM μm / μm MAFRF41 AD μm Page 24 MATFR μm FILTER for TURBINE TYPE Page 25 MWC Filter for turbine type I

3 MAM 55 / 45 / 35 series Body size Port size* MAM*35 3/8, 1/2 MAM*45 1/2, 3/4 MAM*55 3/4, 1 * Rc, G, NPT thread Model Filter element WATER SEPARATOR PRECISION FILTER Water separator MAMG Precision filter MAMB 3 μm MAMD.3 μm MAMM.1 μm MAMF.1 μm + Deodorization MAMG MAMB MAMD MAMM MAMF EWS Water separator E3 3 μm E3.3 μm E1.1 μm E1D.1 μm + Deodorization Removal rate 99% Filtration efficiency 99% Filtration efficiency 99.9% Filtration efficiency 99.9% Filtration efficiency 99.9% Separating the water droplet with a special filtration in the compressed air. * cannot remove moisture. Removing the impurities Removing the oil which the particles are mist and impurities bigger than 3μm in which the particles are compressed air, and bigger than.3μm in extending the life of compressed air. precision filter in the down-stream, then preventing trouble with the equipment. Removing the oil mist and impurities which the particles are bigger than.1μm in compressed air. The filter can be applied to requirement of high purity and extremely low oil mist. Maintenance Replace filter element at least once per year or when pressure drop reaches.7 MPa. ( E1D every 6 months) 1 Adsorbing the order and efficiently removing oil mist with an activated carbon element in compressed air. The filter can be applied to requirement of high purity and oil-free, such as precision painting operations or food and medical equipment. * Assembling a MAMD series as pre-filter to extend the life of activated carbon.

4 Modular combination example (Option) Model Joiner set Air unit Shutoff valve Soft start-up valve MAM*35 MAM*45 MAM*55 BS-MACP43 MA*41-W MA*43 MVHR4 MVHT4 MAVS4 BS-MACP51 MA*51 Space-saving Various combinations available Easy assembly (DIY) + Joiner set SAMPLE MAMG35 + MAMB35 + MAVS4 Water separator 3 μm Shutoff valve Applicable to the dangerous pneumatic machinery. The valve will control the pressure to increase gradually when the air supply start up, which avoids the accident and machinery damage caused by the sudden action of the actuators. MAVS MAMG MAMB MVHR SAMPLE MVHR4 + MAMG35 + MAMB35 Shutoff valve Water separator 3 μm Applicable to the pneumatic circuit to switch the air supply on and off promptly and release residual pressure while the valve is off. MAMG MAMB SAMPLE MVHT4 + MAMG35 + MAMB35 Shutoff valve Water separator 3 μm Applicable to the pneumatic circuit to switch the air supply on and off promptly and release residual pressure while the valve is off. MVHT 2 MAMG MAMB

5 + Joiner set SAMPLE MAMG45 + MAMB45 Water separator 3 μm Applicable to the main line of the pneumatic circuit or the instance of low compressed air quality demand. For example, the main circuit of the pneumatic system in the factory. MAMG MAMB SAMPLE MAMB45 + MAMD45 + MAMM45 3 μm.3 μm.1 μm Applicable to the instance of high compressed air quality demand. For example, food processing industry and pharmaceutical plant. MAMB MAMD MAMM SAMPLE MAMG55 + MAMB55 + MAR51 Water separator 3 μm Regulator Applicable to the instance of pressure regulation requirement. For example, automation industry and machine tool. MAR MAMG MAMB SAMPLE MAMG55 + MAMB55 + MAL51 Water separator 3 μm Lubricator Applicable to the instance of lubrication requirement. For example, automation industry and machine tool. MAMG 3 MAMB MAL

6 MAMG series AIR UNIT (WATER SEPARATOR) Features Separating the water droplet with a special filtration in the compressed air. * cannot remove moisture. Maintenance Replace filter element at least once per year or when pressure drop reaches.7 MPa. Specification Symbol Model MAMG35 MAMG45 MAMG55 Bore No. 1A 15A 15A 2A 2A 25A Port size 3/8 1/2 1/2 3/4 3/4 1 Medium Operating perssure range (*) Proof pressure Ambient temperature Air.5~1 MPa 1.5 MPa 5~+6 C (No freezing) Filter element Water separator (Removal rate 99%) Attchment L-type bracket Weight 87 g 145 g 225 g * Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. * Choose auto-drain FMRF3, the pressure range is.15~1 MPa. Order example MAMG45 15A D MODEL BODY SIZE PORT SIZE 1A: 3/8 15A: 1/2 15A: 1/2 2A: 3/4 2A: 3/4 25A: 1 G: Water separator (Removal rate 99%) PORT HREAD Blank: Rc thread G: G thread NPT: NPT thread Blank: Semi-auto drain D: Auto drain valve (FMRF3) Selector table Filter element Model Port size Filter element Nominal * flow capacity l/min(anr) Symbol for order MAMG35 3/8, 1/2 Water 135 EWS-G35 MAMG45 1/2, 3/4 separator (removal 21 EWS-G45 MAMG55 3/4, 1 rate 99%) 36 EWS-G55 * Nominal flow capacity is at.7 MPa, and it varies depending on the operating pressure. If flow rate is over nomial flow capacity, may not meet the specifications of the product. MAMG series Water removal rate Condition of inlet air Temperature ( C) 34.2 Pressure (MPa).6 Liquid water content (g/m 3 ) 16.8 Water removal rate (%) 99±1 Removed water (water droplet) g Water removal rate (%) = 1 Inflowed water (water droplet) g * Water separator can remove water droplets, but it cannot remove moisture. Filter element EWS-G35 EWS-G45 EWS-G55 Body / Port size A 3/8 15A 1/2 15A 1/2 2A 3/4 2A 3/4 25A 1 Dimensions * Please refer to page 14. 4

7 MAMG Capacity AIR UNIT (WATER SEPARATOR) If flow rate is over nomial flow capacity, may not meet the specifications of the product. MAMG A Primary pressure 1. MPa A Primary pressure 1. MPa MAMG A Primary pressure 1. MPa A Primary pressure 1. MPa MAMG A Primary pressure 1. MPa A Primary pressure 1. MPa

8 MAMB series 3 μm AIR UNIT (MAIN LINE FILTER) Features Removing the impurities which the particles are bigger than 3μm in compressed air, and extending the life of precision filter in the down-stream, then preventing trouble with the equipment. Maintenance Replace filter element at least once per year or when pressure drop reaches.7 MPa. Specification Symbol Order example MAMB 45 15A D MODEL B: 3 μm BODY SIZE PORT SIZE 1A: 3/8 15A: 1/2 15A: 1/2 2A: 3/4 2A: 3/4 25A: 1 PORT HREAD Blank: Rc thread G: G thread NPT: NPT thread Blank: Semi-auto drain D: Auto drain valve (FMRF3) Model MAMB35 MAMB45 MAMB55 Bore No. 1A 15A 15A 2A 2A 25A Port size 3/8 1/2 1/2 3/4 3/4 1 Medium Operating perssure range (*) Proof pressure Ambient temperature Filter element Attchment Air.5~1 MPa 1.5 MPa 5~+6 C (No freezing) 3 μm L-type bracket Weight 87 g 145 g 225 g * Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. * Choose auto-drain FMRF3, the pressure range is.15~1 MPa. Selector table Filter element Model Port size Filter element * 1 Nominal* 2 flow capacity l/min(anr) Symbol for order MAMB35 3/8, 1/2 E3: 3μm 135 E3-B35 MAMB45 1/2, 3/4 (filtration efficiency 21 E3-B45 MAMB55 3/4, 1 99%) 36 E3-B55 *1. Tested according to ISO8573. *2. Nominal flow capacity is at.7 MPa, and it varies depending on the operating pressure. If flow rate is over nomial flow capacity, may not meet the specifications of the product. Dimensions * Please refer to page 14. Filter element E3-B35 E3-B45 E3-B55 Body / Port size A 3/8 15A 1/2 15A 1/2 2A 3/4 2A 3/4 25A 1 6

9 MAMB Capacity AIR UNIT (MAIN LINE FILTER) If flow rate is over nomial flow capacity, may not meet the specifications of the product. MAMB A Primary pressure 1. MPa A Primary pressure 1. MPa MAMB A Primary pressure 1. MPa A Primary pressure 1. MPa MAMB A Primary pressure 1. MPa A Primary pressure 1. MPa

10 MAMD series.3 μm AIR UNIT (MIST FILTER) Features Removing the oil mist and impurities which the particles are bigger than.3μm in compressed air. Maintenance Replace filter element at least once per year or when pressure drop reaches.7 MPa. Specification Symbol Model MAMD35 MAMD45 MAMD55 Bore No. 1A 15A 15A 2A 2A 25A Port size 3/8 1/2 1/2 3/4 3/4 1 Medium Operating perssure range (*) Proof pressure Ambient temperature Filter element Attchment Air.5~1 MPa 1.5 MPa 5~+6 C (No freezing).3 μm L-type bracket Weight 87 g 145 g 225 g * Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. * Choose auto-drain FMRF3, the pressure range is.15~1 MPa. Order example MAMD45 15A D MODEL D:.3 μm BODY SIZE PORT SIZE 1A: 3/8 15A: 1/2 15A: 1/2 2A: 3/4 2A: 3/4 25A: 1 PORT HREAD Blank: Rc thread G: G thread NPT: NPT thread Blank: Semi-auto drain D: Auto drain valve (FMRF3) Selector table Filter element Model Port size Filter element * 1 Residual oil content * 2 3 Nominal* flow capacity l/min(anr) Symbol for order MAMD35 3/8, 1/2 E3: 135 E3-D35 MAMD45 1/2, 3/4.3μm <.1 (filtration mg/m 3 efficiency 21 E3-D45 MAMD55 3/4, %) 36 E3-D55 *1. Tested according to ISO8573. *2. Tested according to ISO125-1, inlet concentration 1mg/m 3 *3. Nominal flow capacity is at.7 MPa, and it varies depending on the operating pressure. If flow rate is over nomial flow capacity, may not meet the specifications of the product. Dimensions * Please refer to page 14. Filter element E3-D35 E3-D45 E3-D55 Body / Port size A 3/8 15A 1/2 15A 1/2 2A 3/4 2A 3/4 25A 1 8

11 MAMD Capacity AIR UNIT (MIST FILTER) If flow rate is over nomial flow capacity, may not meet the specifications of the product. MAMD A Primary pressure 1. MPa A Primary pressure 1. MPa MAMD A Primary pressure 1. MPa A Primary pressure 1. MPa MAMD A Primary pressure 1. MPa A Primary pressure 1. MPa

12 MAMM series.1 μm AIR UNIT (MICRO MIST FILTER) Features Removing the oil mist and impurities which the particles are bigger than.1μm in compressed air. The filter can be applied to requirement of high purity and extremely low oil mist. Maintenance Replace filter element at least once per year or when pressure drop reaches.7 MPa. Specification Symbol Order example MAMM45 15A D MODEL M:.1 μm BODY SIZE PORT SIZE 1A: 3/8 15A: 1/2 15A: 1/2 2A: 3/4 2A: 3/4 25A: 1 PORT HREAD Blank: Rc thread G: G thread NPT: NPT thread Blank: Semi-auto drain D: Auto drain valve (FMRF3) Model MAMM35 MAMM45 MAMM55 Bore No. 1A 15A 15A 2A 2A 25A Port size 3/8 1/2 1/2 3/4 3/4 1 Medium Operating perssure range (*) Proof pressure Ambient temperature Filter element Attchment Air.5~1 MPa 1.5 MPa 5~+6 C (No freezing).1 μm L-type bracket Weight 87 g 145 g 225 g * Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. * Choose auto-drain FMRF3, the pressure range is.15~1 MPa. Selector table Filter element Model Port size Filter element * 1 Residual oil content * 2 3 Nominal* flow capacity l/min(anr) Symbol for order MAMM35 3/8, 1/2 E1: 1 E1-M35 MAMM45 1/2, 3/4.1μm <.1 (filtration mg/m 3 efficiency 2 E1-M45 MAMM55 3/4, %) 36 E1-M55 *1. Tested according to ISO8573. *2. Tested according to ISO125-1, inlet concentration 1mg/m 3 *3. Nominal flow capacity is at.7 MPa, and it varies depending on the operating pressure. If flow rate is over nomial flow capacity, may not meet the specifications of the product. Dimensions * Please refer to page 14. Filter element E1-M35 E1-M45 E1-M55 Body / Port size A 3/8 15A 1/2 15A 1/2 2A 3/4 2A 3/4 25A 1 1

13 MAMM Capacity AIR UNIT (MICRO MIST FILTER) If flow rate is over nomial flow capacity, may not meet the specifications of the product. MAMM A Primary pressure 1. MPa A Primary pressure 1. MPa MAMM A Primary pressure 1. MPa A Primary pressure 1. MPa MAMM A Primary pressure 1. MPa A Primary pressure 1. MPa

14 MAMF series.1 μm + Deodorization AIR UNIT (ODOR REMOVAL FILTER) Symbol Order example MAMF45 15A D MODEL BODY SIZE PORT SIZE 1A: 3/8 15A: 1/2 15A: 1/2 2A: 3/4 2A: 3/4 25A: 1 PORT HREAD Blank: Rc thread G: G thread NPT: NPT thread Blank: Semi-auto drain D: Auto drain valve (FMRF3) F:.1 μm + Deodorization (*) * Assembling a MAMD series as pre-filter of activated carbon. Features Adsorbing the order and efficiently removing oil mist with an activated carbon element in compressed air. The filter can be applied to requirement of high purity and oil-free, such as precision painting operations or food and medical equipment. * Assembling a MAMD series as pre-filter to extend the life of activated carbon. Maintenance Replace filter element at least every 6 months or when pressure drop reaches.7 MPa. Specification Model MAMF35 MAMF45 MAMF55 Bore No. 1A 15A 15A 2A 2A 25A Port size 3/8 1/2 1/2 3/4 3/4 1 Medium Operating perssure range (*1) Proof pressure Ambient temperature Air.5~1 MPa 1.5 MPa 5~+6 C (No freezing) Filter element.1μm+deodorization (*2) Attchment L-type bracket Weight 87 g 145 g 225 g *1. Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. Choose auto-drain FMRF3, the pressure range is.15~1 MPa. *2. Assembling a MAMD series as pre-filter to extend the life of activated carbon. Selector table Filter element Model Port size Filter element * 1 Residual oil content * 2 3 Nominal* flow capacity l/min(anr) Symbol for order MAMF35 3/8, 1/2 E1D: 1 E1D-F35 MAMF45 1/2, 3/4.1μm + Deodorization <.5 (filtration mg/m 3 2 E1D-F45 MAMF55 3/4, 1 efficiency 99.9%) 36 E1D-F55 *1. Tested according to ISO8573. *2. Tested according to ISO125-1, inlet concentration 1mg/m 3 *3. Nominal flow capacity is at.7 MPa, and it varies depending on the operating pressure. If flow rate is over nomial flow capacity, may not meet the specifications of the product. Filter element E1D-F35 E1D-F45 E1D-F55 Body / Port size A 3/8 15A 1/2 15A 1/2 2A 3/4 2A 3/4 25A 1 12

15 MAMF Capacity AIR UNIT (ODOR REMOVAL FILTER) If flow rate is over nomial flow capacity, may not meet the specifications of the product. MAMF A Primary pressure 1. MPa A Primary pressure 1. MPa MAMF A Primary pressure 1. MPa A Primary pressure 1. MPa MAMF A Primary pressure 1. MPa A Primary pressure 1. MPa

16 MAM* Dimensions AIR UNIT (PRECISION FILTER WATER SEPARATOR) P D W D Q O R S D I K U T L N V A H C J B F G(maintain space) ø5-drain outlet E MAM*-D 29.4 ø8-drain outlet Code Model Port size A B C D E F G H I J K T U L M V N O P Q R S W MAM*35 3/8,1/ MAM*45 1/2,3/ MAM*55 3/4,

17 MAM* Modular combination example AIR UNIT (PRECISION FILTER WATER SEPARATOR) BS-MACP51 Joiner set Available components (Option) Example 4 Model Joiner set Air unit MAM*35 BS-MACP43 MA*41-W MA*43 Shutoff valve MVHR4 MVHT4 Soft start-up valve MAVS4 MAM*45 MAM*55 Space-saving. Easy assembly (DIY). BS-MACP51 MA*51 Various combinations available. BS-MACP43 Joiner set Example 1 Example 5 MAMG45 MAMG55 (Removal rate 99%) MAMB45 MAMB55 3μm BS-MACP51 Joiner set MVHR4 Shutoff valve MAMG35 (Removal rate 99%) MAMB35 3μm MAMB45 MAMB55 3μm MAMD45 MAMD55.3μm MAMM45 MAMM55.1μm BS-MACP43 Joiner set Example 2 Example 6 BS-MACP51 Joiner set MVHT4 Shutoff valve MAMG35 (Removal rate 99%) MAMB35 3μm BS-MACP43 Joiner set MAMG45 MAMG55 (Removal rate 99%) MAMB45 MAMB55 3μm MAR51 Pressure reducing valve BS-MACP51 Joiner set Example 3 Example 7 MAVS4 Soft start-up valve MAMG35 (Removal rate 99%) MAMB35 3μm MAMG45 MAMG55 (Removal rate 99%) MAMB45 MAMB55 3μm MAL51 Lubricator 15

18 MA*32 / 41 / 51* series AIR UNIT (AIR /MIST / MICRO MIST FILTER) MAF32D MAF32M Model Air filter 5 μm Mist filter.3 μm Micro mist filter.1 μm Regulator MAF32D Air filter D M.3 μm.1 μm Auto drain type Auto drain type MAF32M MAF51D MAF51M MAF41A MAF41D MAF51D MAF51M MAF41M MAFF41AD MAFF41DM MAFRF41 Air filter D M.3 μm.1 μm Auto drain type Auto drain type MATFR41 MAF41A MAF41D MAF41M Air filter A D M 5 μm.3 μm.1 μm Auto drain type Auto drain type Auto drain type MAFF41AD MAFF41DM AD DM Air filter 5 μm.3 μm + + Mist filter.3 μm.1 μm Auto drain type Auto drain type Regulator Regulator MAFRF41 MATFR41 Air filter 5 μm Auto drain type Mist filter Air filter Mist filter Micro mist filter +.3 μm 5 μm +.3 μm +.1 μm Auto drain type 16

19 MAF32D / M series AIR UNIT (MIST / MICRO MIST FILTER) Symbol MA32D is designed for removal of foreign matter as well as oil mist (Element:.3μm) MA32M is designed for removal of foreign matter as well as oil mist (Element:.1μm) Specification D:.3μm M:.1μm Order example MAF32D 8A ND B MODEL FILTER ELEMENT D:.3 μm M:.1 μm PORT SIZE 8A: 1/4 1A: 3/8 15A: 1/2 BOWL Blank: PC bowl N: Nylon bowl Blank: Without bracket B: C type bracket Model Option accessories C type bracket MAF32D/M Bore No. 8A 1A 15A Port size 1 /4 3/8 1/2 Medium Operating pressure range (*) Proof pressure Ambient temperature Filter element Air.5~1 MPa 1.5 MPa 5~+6 C (No freezing).3 μm,.1 μm Drain capacity 35 cm 3 Weight OPTION Blank: Semi-auto drain D: Auto drain valve (FMRF3) g * Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. * Choose auto-drain FMRF3, the pressure range is.15~1 MPa. PORT THREAD Blank: Rc thread G: G thread NPT: NPT thread MAF32D/M-D Auto drain valve Order of filter element Order No. Filter element E μm E μm (157.1) Rc1/4 2-Rc3/8 2-Rc1/ ø8-drain outlet ø6-drain outlet 17

20 MAF51D / M series AIR UNIT (MIST / MICRO MIST FILTER) Specification Symbol Model MAF51D/M Bore No. 2A 25A Port size 3/4 1 D:.3μm M:.1μm Order example MAF51D 2A MD B MODEL PORT SIZE 2A: 3/4 25A: 1 Blank: Without bracket B: L type bracket Medium Operating perssure range (*) Option accessories L type bracket Air.5~1 MPa Proof pressure 1.5 MPa Regulated pressure range Ambient temperature Filter element Drain capacity Weight.5~.85 MPa 5~+6 C (No freezing).3 μm,.1 μm Nylon bowl, PC bowl: 75 cm 3 Metal bowl: 7 cm 3 Nylon bowl, PC bowl: 118g Metal bowl: 13g * Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. * Choose auto-drain FMRF3, the pressure range is.15~1 MPa. PORT THREAD Blank: Rc thread G: G thread NPT: NPT thread FILTER ELEMENT D:.3 μm M:.1 μm BOWL Blank: PC bowl M: Metal bowl N: Nylon bowl OPTION Blank: Semi-auto drain D: Auto drain valve (FMRF3) * Metal bowl (M) and nylon bowl (N) can not be selected at the same time. Order of filter element Order No. Filter element E μm E μm 18

21 MAF51D / M Dimensions AIR UNIT (MIST / MICRO MIST FILTER) MAF51D/M-D Auto drain valve ø6-drain outlet MAF51D/M-M Metal bowl (231.4) 2-Rc3/4 2-Rc1 2-Rc3/4 2-Rc (243.3) 25.2 (242.9) 25.2 ø8-drain outlet MAF51D/M-MD Metal bowl + auto drain valve Rc3/4 2-Rc1 2-Rc3/4 2-Rc ø5-drain outlet ø8-drain outlet 19

22 MAF41 A / D / M series AIR UNIT (AIR / MIST / MICRO MIST FILTER) Symbol A: 5μm D:.3μm M:.1μm Order example MAF41D 8A D B MAF41A is designed for draining and removal of foreign matter. (Element: 5μm) MAF41D/M is designed for removal of foreign matter as well as oil mist (Element:.3μm /.1μm) Specification Model MAF41A/D/M Bore No. 8A 1A 15A Port size 1 /4 3/8 1/2 Medium Operating pressure range (*) Proof pressure Ambient temperature Filter element Air.5~1 MPa 2 MPa 5~+6 C (No freezing) 5 μm,.3 μm,.1 μm Drain capacity 7 cm 3 Weight 48 g * Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. * Choose auto-drain FMRF3, the pressure range is.15~1 MPa. MODEL FILTER ELEMENT A: 5 μm D:.3 μm M:.1 μm PORT SIZE 8A: 1/4 1A: 3/8 15A: 1/2 EXTERIOR COLOR Blank: Black & silver W: Gray & white Blank: Semi-auto drain D: Auto drain valve (FMRF3) 75 PORT THREAD Blank: Rc thread G: G thread NPT: NPT thread Blank: Without bracket B: C type bracket Option accessories C type bracket Order of filter element Order No. Filter element E μm E μm E μm (154) 34 2-Rc1/4 2-Rc3/8 2-Rc1/2 ø5-drain outlet 2

23 MAF41 A / D / M Capacity AIR UNIT (AIR / MIST / MICRO MIST FILTER) Flow feature MAF41A (Filter element: 5 μm) MPa Secondary pressure A Primary pressure 1 MPa MPa Secondary pressure A Primary pressure 1 MPa MPa Secondary pressure A Primary pressure 1 MPa MAF41D (Filter element:.3 μm) MPa Secondary pressure A Primary pressure 1 MPa MPa Secondary pressure A Primary pressure 1 MPa MPa Secondary pressure A Primary pressure 1 MPa MAF41M (Filter element:.1 μm) MPa Secondary pressure A 1 2 Primary pressure 1 MPa MPa Secondary pressure A 1 2 Primary pressure 1 MPa MPa Secondary pressure A 1 2 Primary pressure 1 MPa

24 MAFF41 AD / DM series AIR UNIT (AIR / MIST / MICRO MIST FILTER) Specification Symbol AD DM Bore No. Model MAFF41AD MAFF41DM 8A,1A,15A Port size 1 /4, 3/8, 1/2 Medium Operating pressure range (*) Proof pressure Ambient temperature Air.5~1.5 MPa 2 MPa 5~+6 C (No freezing) Filter element 5 μm+.3 μm.3 μm+.1 μm Weight 1133 g * Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. * Choose auto-drain FMRF3, the pressure range is.15~1 MPa. Option accessories C type bracket Order example MAFF41AD 8A D B MODEL FILTER ELEMENT PORT SIZE 8A: 1/4 1A: 3/8 15A: 1/2 AD: 5 μm+.3 μm DM:.3 μm+.1 μm EXTERIOR COLOR Blank: Semi-auto drain D: Auto drain valve (FMRF3) Blank: Black & silver W: Gray & white PORT THREAD Blank: Rc thread G: G thread NPT: NPT thread Blank: Without bracket B: C type bracket Order of filter element Order No. Filter element E μm E μm E μm MAFF41** MAFF41**-B (17) (154) (17) (154) 2-Rc1/4 2-Rc3/8 2-Rc1/2 2-Rc1/4 2-Rc3/8 2-Rc1/2 ø5-drain outlet ø5-drain outlet 22

25 MAFRF41 series AIR UNIT (F.R.UNIT) Specification Symbol Model MAFRF41 Bore No. 8A 1A 15A Port size 1 /4 3/8 1/2 Medium Operating pressure range (*) Proof pressure Regulated pressure range Ambient temperature Filter element Attachment Weight Air.5~1.5 MPa 2 MPa Standard type:.1~.85 MPa High pressure type:.1~1.5 Mpa 5~+6 C (No freezing) 5 μm+.3 μm Pressure gauge (PG-2) 1453 g * Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. * Choose auto-drain FMRF3, the pressure range is.15~1 MPa. Order example MAFRF41AD 8A E1 B Option accessories C type bracket MODEL FILTER ELEMENT AD: 5 μm+.3 μm EXTERIOR COLOR PORT SIZE 8A: 1/4 1A: 3/8 15A: 1/2 Blank: Black & silver W: Gray & white (Option) PRESSURE SWITCH E1: MP41P-22 E2: MP41P-22-QD E5: MP41P-42 E6: MP41P-42-QD Blank: Standard type (PG-2) C: External pressure gauge (PG-4) D: Auto drain valve (FMRF3) CH: High pressure type+ External pressure gauge (PG-4) PORT THREAD Blank: Rc thread G: G thread NPT: NPT thread Blank: Without bracket B: C type backet Order of filter element Order No. Filter element E μm E μm * High pressure type (CH) can not choose with auto drain valve (D) when operating pressure over than 1 MPa. * PG-4 (C) and MP41 (E*) can not be selected at the same time. * Refer to page 5-11 for the option of digital pressure switch MP41 (E*). MAFRF41AD MAFRF41AD-B (94) (94) (154) (154) 2-Rc1/4 2-Rc3/8 2-Rc1/2 2-Rc1/4 2-Rc3/8 2-Rc1/2 ø5-drain outlet ø5-drain outlet 23

26 MATFR41 series AIR UNIT (F.R.UNIT) Symbol Specification Model Option accessories C type bracket MATFR41 Bore No. 8A 1A 15A Port size 1 /4 3/8 1/2 Medium Operating pressure range (*) Proof pressure Regulated pressure range Ambient temperature Filter element Attachment Weight Order example MATRF41 8A E1 B Air.5~1.5 MPa 2 MPa Standard type:.1~.85 MPa High pressure type:.1~1.5 Mpa 5~+6 C (No freezing) 5 μm+.3 μm+.1 μm Pressure gauge (PG-2) 216 g * Standard unit contains semi-auto-drain function when operating pressure below.5 MPa. * Choose auto-drain FMRF3, the pressure range is.15~1 MPa. MODEL PORT SIZE 8A: 1/4 1A: 3/8 15A: 1/2 EXTERIOR COLOR Blank: Black & silver W: Gray & white (Option) PRESSURE SWITCH E1: MP41P-22 E2: MP41P-22-QD E5: MP41P-42 E6: MP41P-42-QD PORT THREAD Blank: Rc thread G: G thread NPT: NPT thread Blank: Without bracket B: C type backet Blank: Standard type (PG-2) C: External pressure gauge (PG-4) D: Auto drain valve (FMRF3) CH: High pressure type + External pressure gauge (PG-4) Order of filter element Order No. Filter element E μm E μm E μm * High pressure type (CH) can not choose with auto drain valve (D) when operating pressure over than 1 MPa. * PG-4 (C) and MP41 (E*) can not be selected at the same time. * Refer to page 5-11 for the option of digital pressure switch MP41 (E*). MATFR41 MATFR41-B (94) (94) (154) 2-Rc1/4 2-Rc3/8 2-Rc1/2 (154) (17) 2-Rc1/4 2-Rc3/8 2-Rc1/2 ø5-drain outlet ø5-drain outlet 24

27 MWC series FILTER FOR TURBINE TYPE Features Water removal rate remove as much as 99.99% of the water. Cost space saving save 8% cost. No power supply since no electricity is used, no wiring work is necessary. Installation is very easy. Compact design easily installed in wide variety of mechanical systems, due to space-saving design. Specification Model MWC-1 MWC-4 Port size 3/8 1 External dimension (mm) ø ø13 51 Max. operating pressure 1 MPa Max. air flow (*) 94 Nl/min 4, Nl/min Option Bracket Weight 1.6 kg 4.3 kg * Pressure is at.7 MPa. Order example of filter Order example of bracket MWC 1 NPT BT MWC 1 MODEL FLOW CODE 1 4 PORT THREAD Blank: Rc thread G: G thread BRACKET NPT: NPT thread Blank: Without bracket BT: With bracket BRACKET FLOW CODE 1 4 * NPT, G: Using converting sockets (Attachment). Pressure loss / flow capacity The pressure loss is less than 1% MWC-1 MWC-4 Nl / min. MPa Flow capacity vs. Air pressure Flow capacity vs. Air pressure MPa MPa Pressure loss vs. Flow capacity Pressure loss vs. Flow capacity Nl / min. Nl / min. * This product must be operated within the condition designated by blue areas in the graphs. 25 Nl / min. MPa

28 MWC Four- step separation FILTER FOR TURBINE TYPE Compact and high efficiency Water drop Dust Oil mist Air in Air out Helical air path The compressed air is Induced into the helical air path. M-EDDY filter The M-EDDY filter which absorbs both mist and oil, has four times filtration capacity compared to the regular filters. It can supply clean air free of mist particles whose size is more than 1μm. (A) Mesh coalescer The mesh coalescer removes large particles and lets them fall. The majority of impurities are removed at this stage. Next, centrifugal force removes small particles that have passed through the mesh coalescer. They are dropped into the bottom through the wall of the body and finally collected in the sump. Anti- rolling up mechanism There is a built-in mechanism that keeps isolated impurities from coming back to the air flow. Auto drain The accumulation of oil, sewage and other impurities in the bowl are automatically drain. (B) A. Most of the impurities will be separated by centrifugal force, and the particles size are 2um ~ 5um, even without M-EDDY filter. B. If the concentration of oil or impurity is too high, the automatic drainer may be failure, it is recommended to install manual drainer. Application examples MWC-1 MWC-4 Compressor Piping distance above 15m (*1) (*2) Terminal equipment Compressor Piping distance above 15m (*1) (*2) Terminal equipment *1. Should be installed as far as possible from the compressor. *2. Should be installed as closer as possible to the terminal equipments. 26

29 MWC Proposal FILTER FOR TURBINE TYPE Usual air system 1. Air filter (Particle 5μm) 2. Regulator 3. Mist seperator (Oil.3μm) 22 kw Compressor Main line filter Refrigerating air dryer Particle Water 1. Air filter (Particle 5μm) 2. Regulator 3. Mist seperator (Oil.3μm) 4. Micro mist seperator (Oil mist.1μm) Cyclone dryer system Particle Water Oil 1~3μm 1~3μm 1~3μm 1. Cyclone dryer 2. Regulator 22 kw Compressor Particle Water Oil.3μm.3μm.3μm 1. Cyclone dryer 2. Regulator 3. Mist separator Particle Water Oil.1μm.1μm.1μm 1. Cyclone dryer 2. Regulator 3. Mist separator 4. Micro mist separator 27

30 MWC Dimensions FILTER FOR TURBINE TYPE Dimensions Installation diagram MWC-1 Rc thread MWC-4 ø ø Air in Rc3/8 ø8 74 Air out Air in Rc1 ø12 9 Air out ø82 12 (382) 218 (51) 168 ø82 R1/8 168 R1/8 G & NPT thread G3/8 NPT3/8 (123) ø25 G1 NPT1 (195) ø Using converting sockets Bracket BT-MWC-1 BT-MWC-4 ø8 ø ø122 ø

31 http Web 2D/3D download Video Solenoid Valve Air Treatment Unit Gripper 29

32 OVERSEAS DEPARTMENT No.16, Sec. 3, Chengde Rd., Datong District, Taipei City 13, Taiwan OFFICE No.16, Sec. 3, Chengde Rd., Datong District, Taipei City 13, Taiwan The specifications are subject to change without advence notice. CAT. NO.:MD-DM187-E