Model 69GL T PL

Transcription

1 Model GL- T--0

2 Service Parts List MODEL GL- CONTENTS Introduction... i Ordering Instructions... i Letter Designations... i Model Chart... i. Quick List --- Butt Connectors, Clamps, Electrical Cables, Filters, Grease, Paint, Spiral Rap, Ty-raps, V-belt And Wire Terminals.... Diesel Generator Set Assembly.... Diesel Generator Set --- Panels And Doors.... Diesel Generator Set --- Panels And Doors Removed.... Control Box And Panel.... Fuel Filters And Related Components.... Muffler Assembly Air Cleaner.... Battery Assembly.... Fuel Tank And Unit Mounting.... Generator (Main Alternator) / Generator Mounting And Shockmounts...0 Engine Mounting And Shockmounts.... Labels And Decals.... Lube Oil Filter.... Run Control Solenoid.... Alternator ( Amp) And Regulator.... Alternator Mounting And Fan Assembly Radiator Assembly... Carrier Transicold Division, Carrier Corporation, P.O. Box 0, Syracuse, N.Y. Carrier Corporation D Printed in U. S. A. 0

3 INTRODUCTION This parts list identifies service replacement parts for the Carrier Transicold Diesel-Driven Generator Set listed in the model chart below. This parts list does not include detailed replacement parts for the engine listed in the first chart below. Detailed parts identification for these items may be found in the applicable parts list. The form numbers for the engine omit revision dash numbers. For example, the latest engine list may have an -0 added to the basic number to read Therefore, when forms are ordered the latest revision will be sent. MANUAL/ FORM NO. EQUIPMENT COVERED TYPE OF MANUAL/FORM -0 CT--DI Workshop -0 CT--DI Engine Parts List ORDERING INSTRUCTIONS All orders and inquiries for parts must include: Model, Unit Serial Number, Part Number, description of part as shown on list and quantity required. Address all correspondence for parts to the following address: CARRIER TRANSICOLD DIVISION Replacement Components Group TR-0, P.O. Box 0 Syracuse, New York or Fax to: () - LETTER DESIGNATIONS A/R NLO NS NSA NSI NSS The following letter designations are used to classify parts throughout this list: As Required. P-- Suffix P-- added to part number means part is available in packaged quantity only. Example: No Longer Offered. P/N-00-0P0 is a package of 0 P/N Use part number and P-- suffix Not Shown in the illustration. when ordering. Non-Stock Assembly --- order components listed under the assembly. Non-Stock Item --- may be available on special order. Not Sold Separately --- order next higher assembly or kit. SST SV Purchase Locally. Stainless Steel Series unless otherwise specified. Suffix SV --- added to part number designates service replacement part. MODEL CHART Model Number Fuel Tank U.S.Gallons Amp Alternator Voltage 0 vac ph/0 hz Voltage 0 vac ph/0 hz Engine (Kubota) CT--DI 0 GL- X X X X GL-- X X X X GL-- X X X X GL-- X X X X Revised / i

4 . QUICK LIST -- BUTT CONNECTORS, CLAMPS, ELECTRICAL CABLES, FILTERS, GREASE, PAINT, SPIRAL RAP, TY-RAPS, V-BELT AND WIRE TERMINALS U- Cable, Conductor, #0 AWG, Yellow, 0V (Sold by the foot) (NSI) U-- Cable, Conductor, # AWG, Black, 0V (Sold by the foot) (NSI) -00-P0 Clamp, Tube, / --- SST -00-P0 Clamp, Tube, / --- SST -00-0P0 Clamp, Tube, / --- SST -00-0P0 Clamp, Tube, / --- SST -00-P0 Clamp, Tube, / --- SST -00-P0 Clamp, Tube, / --- SST -00-P0 Clamp, Tube, SST -00-P0 Clamp, Tube, -/ --- SST -00-P0 Clamp, Tube, -/ --- SST -00-P0 Clamp, Tube, -/ --- SST -00-P0 Clamp, Tube, -/ --- SST -000-P0 Clamp, Worm, Range --- / to / OD --- SST P0 Clamp, Worm, Range --- / to / OD --- SST P0 Clamp, Worm, Range --- / to / OD --- SST P0 Clamp, Worm, Range --- / to -/ OD --- SST P0 Clamp, Worm, Range --- -/ to -/ OD --- SST P0 Clamp, Worm, Range --- -/ to 0D --- SST P Connector, Butt End, Wire Range --- to Gauge P Connector, Butt End, Wire Range --- to Gauge P Connector, Butt End, Wire Range --- to 0 Gauge P Connector, Closed End, Wire Range --- to Gauge P Connector, Closed End, Wire Range --- to 0 Gauge P Filter Element, Fuel P Filter, Lube Oil --- Full Flow Grease, Dow Lithium Base (Used for lubricating Fuel Solenoid Plunger) Paint, Spray --- ounces (Gray) -00-0P Ring Terminal, #, Wire Range --- to 0 Gauge -00-0P Ring Terminal, #0, Wire Range --- to 0 Gauge -00-0P Ring Terminal, /, Wire Range --- to 0 Gauge -00-0P Ring Terminal, /, Wire Range --- to 0 Gauge P Ring Terminal, #0, Wire Range --- to Gauge P Ring Terminal, /, Wire Range --- to Gauge -00-0P Ring Terminal, #0, Wire Range --- to Gauge -0-0P Ring Terminal, /, Wire Range --- to Gauge -0-0P Spade Terminal,.0 x.0, Wire Range --- to Gauge -00-0P Spade Terminal, /, Wire Range --- to 0 Gauge F Spiral Wrap, / inch Diameter x feet long F Spiral Wrap, / inch Diameter x feet long -00-0P Ty-Raps, -/ inches long -00-0P Ty-Raps, inches long V-Belt, Alternator Revised /

5 . DIESEL GENERATOR SET ASSEMBLY. DIESEL GENERATOR SET -- PANELS AND DOORS ROADSIDE VIEW 0 0 CURBSIDE VIEW Revised /

6 . DIESEL GENERATOR SET -- PANELS AND DOORS GL- Cover, Engine Screw, Hex Head, /-0 x.00 lg --- SST (NSI) A/R NT-- Washer, Fender, / inch Thick --- SST (NSI) A/R U-- Washer, Flat, / --- SST A/R GL- Door Assembly, Access --- Roadside --- Includes: Latch, Door Rivet, Blind, / Diameter, Grip Range --- / to / --- SST (NSI) Hinge -00- Rivet, Blind, / Diameter, Grip Range --- / to / --- SST (NSI) 0 GL- Panel, Bottom GL- Door Assembly, Control Box --- Includes: Latch, Door Rivet, Blind, / Diameter, Grip Range --- / to / --- SST (NSI) Hinge -00- Rivet, Blind, / Diameter, Grip Range --- / to / --- SST (NSI) GL- Panel, Clear Plastic (NSI) GL- Gasket, Panel U-- Rivet, Blind, / Diameter, Grip Range --- / to / --- SST (NSI) 0 GU- Washer, Flat, / OD x / ID x / inch Thick --- SST (NSI) 0 GL- Cover, Generator GL- Panel, Front -00- Washer, Lock, / --- SST (NSI) A/R GL- Panel, Grille 0 GL- Door Assembly, Access --- Curbside --- Includes: Latch, Door Rivet, Blind, / Diameter, Grip Range --- / to / --- SST (NSI) Hinge -00- Rivet, Blind, / Diameter, Grip Range --- / to / --- SST (NSI) NS GL- Baffle, Bottom NS U--F0 Trim, Flex ( ft, to be cut to length) A/R NS U-0-F Gasket, Adhesive Back, Pressure Sensitive,.00 inch wide x / inch thick ( ft, to be cut to length) A/R Revised /

7 . DIESEL GENERATOR SET -- PANELS AND DOORS REMOVED 0 0 Revised /

8 . DIESEL GENERATOR SET -- PANELS AND DOORS REMOVED --- Control Box Assembly --- Refer to Section Plate, Serial/Model (Shown for location only) Air Cleaner --- Refer to Section Radiator Assembly --- Refer to Section V-belt, Fan --- Refer to Section Filter, Lube Oil --- Refer to Section Shockmounts, Engine --- Refer to Section Fuel Head Assembly and Filters --- Refer to Section Pump, Mechanical Fuel --- Refer to Form Solenoid, Run Control (Location) --- Refer to Section Shockmounts, Generator --- Refer to Section Tank, Fuel --- Refer to Section Battery --- Refer to Section Generator --- Refer to Section Sender, Oil Pressure Gauge (Location) --- Refer to Section Muffler --- Refer to Section Alternator, Battery Charging --- Refer to Section Engine, Kubota --- Refer to Form -0 GL- Frame Assembly (NSI) Mounting, Unit --- Refer to Section Cable, Power, 0V --- Refer to Section --- Revised /

9 . CONTROL BOX AND PANEL Revised /

10 . CONTROL BOX AND PANEL GL-0 Panel, Control Box (NSI) NS U-0-F Gasket, Control Box ( ft, cut to length) A/R U-- Screw, Hex Head, #0- x / lg --- SST (NSI) A/R U-- Washer, Flat, #0 --- SST (NSI) A/R -000 Lamp, Incandescent --- vdc (CB Trip Light) Base, Lamp Jewel Assembly, Lamp (Red) U-0 Meter, Hour (TT) GS-- Gasket, Neoprene,. OD x. ID (NSI) U-- Bolt, Pan Head, #-0 x / lg --- SST (NSI) Locknut, Hex Head, # SST (NSI) Gauge, Water Temperature (WTG) NS Sender, Water Temperature Gauge (WTS) NS Switch, Water Temperature Safety (HWT) (Located on engine near the thermostat housing) KKEW Seal, O-Ring,.0 ID (NSI) U- Gauge, Oil Pressure (OPG) Meter, Ammeter (A) 0-00 Switch, Toggle (GPS) U- Seal, Toggle Switch CH-0- Label, Danger-High Voltage (NSI) 0-00 Switch, Toggle (IGN) -00 Meter, Volt (V) --- Optional 0 GS- Gasket, Neoprene,. OD x. ID (Whenitemisused) GS-- Label, Circuit Breaker ( I/CB/O ) (NSI) U-- Circuit Breaker, amp vac (CB-) U-- Circuit Breaker, amp vac (CB -) --- GL-- U- Boot, Circuit Breaker --- Includes: NSS Frame, Boot NSS Screw, Pan Head, #- x / lg --- SST U- Block, Terminal ( Terminals) (TB) (NSI) U-- Screw, Hex Head, #- x.00 lg --- SST (NSI) U-- Washer, Flat, # --- SST (NSI) Circuit Breaker, 0 amp (CB-) 0 U-- Bolt, Pan Head, #- x / lg --- SST (NSI) U-- Washer, Lock, #0 --- SST (NSI) Terminal ATQA Nut, Hex Head, # Brass (NSI) Hardware Circuit Breaker, amp (CB-) U-- Screw, Hex Head, #0- x / lg --- SST (NSI) F Wrap, Spiral, / inch Diameter, ( ft, to be cut to length) F Wrap, Spiral, / inch Diameter, ( ft, to be cut to length) Block, Terminal (TB) (NSI) AA0JA0 Screw, Hex Head, /-0 x.00 lg --- SST U-- Washer, Flat, / --- SST 0 ATQA Nut, Hex Head, # Brass (NSI) Relay, Run Control (RCR) Cover, Run Control Relay --- Plastic GL-0 Box, Control (NSI) GC- Label, Switch (NSI) GL- Label, Switch Russian (NSI) GU- Label, Circuit Breaker Trip Light (NSI) GL- Label, Circuit Breaker Trip Light Russian (NSI) HYAA00 Terminal, Jumper, 0 amp --- GL-- (NSI) NS U- Diode, amp, D (Alternator) and D (Run Control Relay) NS Diode, amp, D (Hour Meter) NS Jumper, Terminal, 0 amp (GPS, IGN) NS Plug, Female 0 volt --- GL--, - (NSI) NS Plug, Female 0 volt --- GL-- (NSI) NS -0-0 Bushing (For Plug -0-00) (NSI) NS -0-0 Bushing (For Plug ) (NSI) --- GL-- Revised /

11 . FUEL FILTERS AND RELATED COMPONENTS 0 0 INJECTORS INJECTION PUMP MECHANICAL LIFT FUEL PUMP UNIT BULKHEAD RETURN SUPY FUEL TANK Revised /

12 . FUEL FILTERS AND RELATED COMPONENTS Bulkhead Union, / nptf x / nptf (NSI) F0 Hose, / OD (0 ft, to be cut to length) A/R Union, Reducing, / Tube to / Tube --- Brass (NSI) F0 Hose, / OD (0 ft, to be cut to length) A/R Tee, Special, / ID Hose x / OD Tube x / ID Hose Clamp, Worm, Range --- / to / OD --- SST F Hose, / OD ( ft, to be cut to length) A/R Seal, Banjo, M Fitting, Hose, Banjo, mm x. Tube F Hose, / ID ( ft, to be cut to length) A/R Filter, Fuel (With Heater) --- Includes: NSS Head Assembly Element, Filter (NSI) O-Ring, Bowl Bowl (Heater not included) NS Heater NS O-Ring, Heater Plug Assembly, Drain U-- Bolt, Hex Head, /- x.00 lg --- SST (NSI) U-- Washer, Flat, / --- SST (NSI) AUJR Washer, Lock, / --- SST (NSI) Revised /

13 . MUFFLER ASSEMBLY Pipe, Exhaust,. OD -00 Stud, M0 x /- x.0 lg --- SST U-- Washer, Flat, / --- SST (NSI) -00- Nut, Jam, /- --- Brass (NSI) Clamp, Pipe,. ID Muffler, Exhaust --- SST U-- Washer, Flat, / --- SST (NSI) U-- Locknut, /- --- SST (NSI) GU- Bracket Assembly, Muffler Mounting 0-0- Capscrew, Hex Head, M x. x mm lg --- SST -0- Washer, Flat, M --- SST (NSI) -0- Washer, Lock, M --- SST (NSI) Revised / 0

14 . AIR CLEANER Hood, Air Inlet --- Plastic 0-00 Air Cleaner --- Includes: Clamp, Oil Cup Oil Cup Oil Cup, Inner Clamp, Air Cleaner Mounting Capscrew, Hex Head, /-0 x.00 lg --- SST (NSI) U-- Washer, Flat, / --- SST -00- Locknut, / SST (NSI) Hose, Air Inlet Clamp, Worm, Range --- -/ to.00 inch OD (NSI) Label, Service Instructions (NSI) GL- Label, Service Instructions Russian (NSI) Revised /

15 . BATTERY ASSEMBLY 0 Negative (Black) Positive (Red) Battery, vdc, Reserve capacity in minutes --- amps at 0_F (+._C) = 0/0 minutes. Cold crank amps at 0_F ( ---._C) = 0/ amps. Cold crank amps at --- 0_F ( ---._C) = 0/ amps J-Hook, Battery -00- Locknut, Hex Head, /- --- SST (NSI) U-- Washer, Flat, / --- SST (NSI) Angle, Battery Hold-down GU- Box Assembly, Battery Screw, Hex Head, /- x -/ lg --- SST (NSI) U-- Washer, Flat, / --- SST (NSI) AUJR Washer, Lock, / --- SST (NSI) Washer, Lock, / External Tooth --- SST (NSI) Clamp, Hose, Cushioned, / ID --- SST Capscrew, Hex Head, /-0 x / lg --- SST (NSI) -00- Washer, Flat, / --- SST (NSI) -00- Washer, Lock, / --- SST (NSI) Revised /

16 . FUEL TANK AND UNIT MOUNTING 0 Generator Set Mounting Assembly Chassis I-beam Unit Mounting 0 GL- Tank, Fuel, (0 gal) --- Includes: GL-- Tank, Fuel, ( gal) --- Includes: Cap and Chain (Non-Vented Type) --- Brass Gauge, Fuel Level (with float and arm) --- Includes: Dial, Fuel Gauge Tube, Pickup, M x. Banjo bolt with / OD tube Vent, Fuel Nut, Shoulder, /- --- SST (NSI) A/R GL- Strap Assembly, Fuel Tank Mounting Pad, Rubber Fitting, Hose, mm Banjo x. Tube F0 Hose, / OD (0 ft, to be cut to length) A/R F0 Hose, / ID (0 ft, to be cut to length) A/R 0-00 Plug, Drain, Ball Check,/ npt (NSI) Seal --- M -00- Washer, Flat, / --- SST (NSI) A/R -00- Screw, Hex Head, /- x.00 lg --- SST (NSI) -00- Washer, Flat, / --- SST (NSI) -00- Locknut, /- --- SST (NSI) -0-0 Pad, Rubber 0 GL- Frame Assembly, Fuel Tank Mounting -000 Screw, Hex Head, /- x -/ lg --- Grade GL- Clip Assembly, Unit Mounting -00- Locknut, Hex Head,/- --- SST (NSI) NS -0-0 Decal, Diesel Fuel Only (NSI) NS GL- Decal, Diesel Fuel Only Russian (NSI) ATAB0 Locknut, /- (NSI) AU0AB0 Washer, Plain / --- SAE (NSI) U-- Nut, Jam /- (NSI) Revised /

17 . GENERATOR (MAIN ALTERNATOR) / GENERATOR MOUNTING AND SHOCKMOUNTS OLD STYLE (NLO) NEW STYLE 0 GENSET FRAME Generator, KW, New --- Includes: -00-0RM Generator, KW, Remanufactured --- Includes: Nut,Hex,/-0 Bolt,RoundHead,/-0x-/lg---SAEGrade Rectifier Assembly --- New Style --- Includes: NS Diode, Forward NS Diode, Reverse (R) NLO Rectifier Assembly --- Old Style --- Includes: NS -000 Diode, Forward (Red) NS -000 Diode, Reverse (Black) Bearing Cap, Bearing --- Includes: Dust Cap NS O-Ring Bolt, Hex Head, /- x / lg --- SST U-0 Disc Drive (. Thick Total) Locknut, Hex Head, /- --- SST (NSI) -00- Washer, Flat, / (NSI) 0 U-- Washer, Flat, / --- SST (NSI) U-- Capscrew, Hex Head, /- x / lg --- SST (NSI) U- Washer, Lock, / --- SST (NSI) U- Bolt, Hex Head, /- x -/ lg (NSI) Eyebolt, /- GN-- Plate, Terminal Access (NSI) Gasket, Terminal Access Plate U-- Washer, Flat, / --- SST (NSI) Washer, Lock, / --- SST (NSI) U-- Screw, Hex Head, /-0 x / lg (NSI) Mounting Assembly, Generator --- Includes: NSS Bracket --- Right NS NSS Bracket --- Left Capscrew, Hex Head, /- x. lg --- SST (NSI) -00- Locknut, Hex Head, /- (NSI) Screw, Hex Head, /- x.00 lg (NSI) SV Shockmount, Generator --- Includes: Washer, Flat, Special,.0 Thick --- SST Screw, Hex Head, /- x -/ lg --- SST (NSI) Washer, Flat, / --- SST (NSI) Revised /

18 .0 ENGINE MOUNTING AND SHOCKMOUNTS RIGHT SIDE VIEW LEFT SIDE VIEW Genset Frame 0 GL-0- Mounting Assembly, Engine -00- Screw, Hex Head, /- x.0 lg --- SST (NSI) -00- Washer, Flat, / --- SST (NSI) SV Shockmount, Engine --- Includes: Washer, Flat, Special,. Thick --- SST U-- Washer, Flat, / --- SST (NSI) ATJA Locknut, Hex Head, /- --- SST (NSI) Screw, Hex Head, /- x -/ lg --- SST -00- Locknut, Hex Head, /- --- SST (NSI) 0 AUJR Washer, Lock, / --- SST Bracket, Engine Mounting --- Left -0- Capscrew, Hex Head, M x. x mm lg --- SST -0- Washer, Flat, M --- SST (NSI) -0- Washer, Lock, M --- SST (NSI) Bracket, Engine Mounting --- Right -0- Capscrew, Hex Head, M0 x. x mm lg --- SST -0-0 Washer, Flat, M0 --- SST -0-0 Washer, Lock, M0 --- SST (NSI) Screw, Hex Head, /- x -/ lg --- SST (NSI) Revised /

19 . LABELS AND DECALS -0-0 Label, Carrier Transicold (NSI) GU- Label, Start-Stop (NSI) GL- Label, Start-Stop Russian (NSI) GL- Label, Unit Weight (NSI) GL- Label, Operating Instructions (NSI) GL- Label, Operating Instructions Russian (NSI) GL- Label, Legend (NSI) GL- Label, Legend Russian (NSI) GL- Label, Electrical Wiring Schematic (NSI) GL- Label, Electrical Wiring Schematic (NSI) --- GL-- GL- Label, Electrical Wiring Diagram (NSI) GL- Label, Electrical Wiring Diagram (NSI) --- GL-- GC-- Label, Direction Arrow (NSI) Label, Disconnect Power (NSI) GL- Label, Disconnect Power Russian (NSI) Revised /

20 . LUBE OIL FILTER 0 Located on backside of engine 0-00 Filter, Engine Oil Label, Service (NSI) Decal, Lube (NSI) GL- Decal, Lube Russian (NSI) CAJA0 Elbow, 0_ Street, / fpt x / mpt --- Brass (NSI) CAJA0 Plug, Pipe, /- npt --- Brass (NSI) O-Ring, Silicone Adapter, / pt x / npt Tee, Street / mpt x / fpt x / fpt --- Brass (NSI) Switch, Oil Pressure Safety 0 U-- Sender, Oil Pressure Gauge Revised /

21 . RUN CONTROL SOLENOID 0 Run Control Lever 0-00 Solenoid, Linear --- Includes: -000 Boot, Solenoid NS Plunger --- Includes: Bolt, Eye (Solenoid) -00 Terminal, Spade (Adapter) NS Grease, Dow Lithium Base (used on solenoid plunger) U-- Screw, Hex Head, /-0 x / lg --- SST (NSI) U-- Washer, Flat, / --- SST -00 Clip, Rod Linkage Rod, Linkage Chain, Single Link ( Links, to be cut to length) A/R Spring GU- Plate Nut, Double GU- Bracket Assembly, Solenoid -0- Bolt, Hex Head, M x. x mm lg --- SST -0- Washer, Lock, M --- SST (NSI) -0- Washer, Flat, M --- SST (NSI) Washer, Flat, M0 --- SST (NSI) NS -0- Screw, Hex Head, M x.00 x mm lg (Low idle adjustment screw) (NSI) Revised /

22 . ALTERNATOR ( AMP) AND REGULATOR Alternator --- Includes: Nut, Pulley Mounting Washer,Lock,Split,/ Fan Spacer, Fan Housing, Front (NSI) Bearing, Front and Rear Screw, Conical Washer, #- x / lg Key, Woodruff, # Rotor Assembly Ring, Slip Stator Assembly Retainer, Rear Bearing (NSI) Housing, Rear (NSI) Bolt, Through, #0- x -/ lg Diode, Bridge Rectifier Diode, Field Screw, Self-Tapping, #- x / lg Nut, Cone Lock, /-0 x / lg Strap, A.C. Tap (NSI) Nut, Lock, #0- x / lg Cover Assembly Washer, Flat, #0 (Iridite) Screw, Self-Tapping, #- x / lg Gasket, Felt Strap D + (NSI) Brush Assembly Washer, Flat, #0 (Timmerman) Regulator Screw, Machine, #0- x / lg Screw, Machine, #- x / lg Screw, Self-Tapping, #0- x / lg Washer, Insulating Revised /

23 . ALTERNATOR MOUNTING AND FAN ASSEMBLY 0 0 () -0- Bolt, Hex Head, M x mm (-/ lg) --- SST - Washer, Lock, M --- SST -0-0 Washer, Flat, M --- SST Fan --- Plastic Spacer, Fan Bracket, Alternator Mounting (Upper) -00- Bolt, Hex Head, /- x -/ lg --- SST (NSI) U- Washer, Lock, / U-- Washer, Flat, / 0 U-- Bolt, Hex Head, /- x -/ lg --- SST (NSI) U-- Washer, Lock, / --- SST (NSI) U-- Washer, Flat, / --- SST (NSI) --- Alternator --- Refer to Section. --- GL- Bracket, Alternator Mounting (Lower) U-- Bolt, Hex Head, /- x.00 lg (NSI) -00- Locknut, /- (NSI) Pulley, Alternator V-Belt, Alternator -00- Washer, Flat, / SAE, Grade (NSI) 0 U-- Washer, Flat, / --- SST (NSI) Revised / 0

24 . RADIATOR ASSEMBLY 0 0 GU-- Radiator Assembly --- Includes: Vent, Air Drain, Cock, / npt GU-- Venturi Assembly Hose, Radiator --- Outlet Clamp, Hose, Worm, Range --- / to -/ OD --- SST GU- Tube (Lower) Hose, Engine --- Lower Hose, Radiator --- Inlet 0 GU- Fill Tube Assembly Cap, Radiator NS -00 Inhibitor, Cooling System Hose, Engine --- Outlet U-- Washer, Flat, / --- SST NT-- Washer, Fender, / inch Thick --- SST (NSI) U-- Bolt, Hex Head, /-0 x / lg --- SST (NSI) -00 Bottle, Coolant Recovery -00 Screw, Closure --- Plastic -00- Tube, Overflow, Clear Vinyl, / ID x.00 inches lg (NSI) Clamp, Hose, Worm, Range --- / to / OD --- SST Capscrew, Hex Head, /-0 x.00 lg --- SST (NSI) -00- Locknut, Hex Head, / SST (NSI) Label, Warning (NSI) GL- Label, Warning Russian (NSI) AU0AB Washer, Plain / SAE (NSI) NS GS-0 Label, Anti-freeze (NSI) NS GL- Label, Anti-freeze Russian (NSI) Revised /