SERVICE PARTS LIST CONTAINER REFRIGERATION UNIT MODELS 69NT NT40-459

Transcription

1 SERVICE PARTS LIST CONTAINER REFRIGERATION UNIT MODELS 9NT0-9 9NT0-9 Carrier Transicold Division, Carrier Corporation, P.O. Box 0, Syracuse, N.Y. Carrier Corporation 99 D Printed in U. S. A. 09

2 . Quick List -- Clamps, Filter-drier, Fuse, Ty-raps, And Wire Terminals.. Tools....refrigeration Unit Assembly....refrigeration Unit -- Front....refrigeration Unit -- Front....control Box Door....control Box Door....control Box Door -- 9nt control Box Door -- 9nt control Box....control Box... 9.control Box -- High Voltage Shield Removed... 0.control Box -- High Voltage Shield Removed....control Box -- Microprocessor Controller Box....control Box -- Microprocessor Controller Box.... Control Box -- Microprocessor Controller Box -- Cover Removed... Control Box -- Microprocessor Controller Box -- Cover Removed...condenser Fan Motor And Coil Section....condenser Fan Motor And Coil Section....9receiver And Tubing Section....9receiver And Tubing Section water-cooled Condenser water-cooled Condenser....evaporator Fan Motor And Access Panel Section....evaporator Fan Motor And Access Panel Section....evaporator Coil Section -- Rear Panels Removed....evaporator Coil Section -- Rear Panels Removed....evaporator Coil Section -- Rear Panels Attached....Evaporator Coil Section -- Rear Panels Attached (Continued)....Evaporator Coil Section -- Rear Panels Attached (Continued).... Recording Thermometer (Partlow) -- Prior To Serial Number Recording Thermometer (Partlow) -- Starting With Serial Number Recording Thermometer (Partlow) -- Starting With Serial Number thermostatic Expansion Valve -- Alco....suction Solenoid Valve....modulating Solenoid Valve....9nitrogen Feed....0compressor Mounting And Gauges....0compressor Mounting And Gauges....voltage Options....voltage Options... 9.fresh Air Makeup Vent... 0.fresh Air Makeup Vent....labels And Decals....Labels And Decals....Accessories....Interrogator And Portable/Personal Computer Connections.... Interrogator And Portable/Personal Computer Connections.... Interrogator And Husky /0 Computer Connections...

3 . Interrogator And Husky /0 Computer Connections.... Interrogator And Husky Hunter Computer Connections.... Interrogator And Husky Hunter Computer Connections Battery And Charger Module... 0.Usda c Size Battery Box....Communications Interface Module (Rmu) Option....Communications Interface Module (Rmu) Option.... compressor -- Motor Assembly....Service Replacement Compressor....Terminal Mounting And Junction Box Group.... Service Valve Group....Compressor -- Motor Body Group....Compressor -- Motor Body Group (Continued)....Pump End Group.... Crankshaft, Rod And Piston Group....Valve Plate Group.... Gasket Set...

4 INTRODUCTION This parts list identifies service replacement parts for the Carrier Transicold container Models listed in the Model Chart below. ORDERING ITRUCTIO All orders and inquiries for parts must include: Model, Unit Serial Number, part no., description of part as shown on list and quantity required. Address all correspondence for parts to the following address: LETTER DESIGNATIO CARRIER TRAICOLD DIVISION Replacement Components Group, TR-0 P.O. Box 0, Syracuse, New York or FAX to: () - The following letter designations are used to classify parts throughout this list: A/R NLO A I S P-- PL SST SV As Required. No Longer Offered. Not Shown in the illustration. Non-Stock Assembly --- order components listed under the assembly. Non-Stock Item --- may be available on special order. Not Sold Separately --- order next higher assembly or kit. Suffix P-- added to part number means part is available in packaged quantity only. Example: P/N-00-0P0 is a package of 0 P/N Use part number and P-- suffix when ordering. Purchase Locally. Stainless Steel Series unless otherwise specified. Suffix SV --- added to part number designates service replacement part. i

5 Model Chart MODELS 9NT X --- X X --- B --- X E 9NT0-9- X X --- X B C X E 9NT X --- X B --- X E 9NT X --- X X X --- D 9NT X --- X B C X E 9NT X --- X B C X E 9NT X --- X B C X E 9NT X --- X X X --- X 9NT X --- X X --- B C X E 9NT X X X X --- X 9NT X X B X RETURN TO TOC A --- Provision for water-cooled condenser. If water-cooled condenser is added, refrigerant charge will change. B --- The microprocessor includes code for dehumidification, even though the units do not have a humidistat. C --- Provision for USDA Cold Treatment. D --- Provision for Communications Interface Module (RMU) option w/ connectors E --- Provision for Communications Interface Module (RMU) option w/out connectors X --- Features that apply to model. i

6 . QUICK LIST -- CLAMPS, FILTER-DRIER, FUSE, TY-RAPS, AND WIRE TERMINALS -00-P0 Clamp, Tube, / --- SST -00-P0 Clamp, Tube, / --- SST -00-0P0 Clamp, Tube, / --- SST -00-0P0 Clamp, Tube, / --- SST -00-9P0 Clamp, Tube, / --- SST -00-P0 Clamp, Tube, / --- SST -00-P0 Clamp, Tube, -/ --- SST -00-P0 Clamp, Tube, -/ --- SST -00-9P0 Clamp, Tube, -/ --- SST -00-P0 Clamp, Tube, -/ --- SST P Connector, Butt End, Wire Range --- to Gauge P Connector, Butt End, Wire Range --- to Gauge P Connector, Butt End, Wire Range --- to 0 Gauge P Connector, Closed End, Wire Range --- to Gauge P Connector, Closed End, Wire Range --- to 0 Gauge U-- Filter-Drier HY0FJ00-P0 Fuse, amp P0 Fuse, amp (Slow Blow) HY0FJ0-P0 Fuse, amp P0 Fuse, amp -00-0P Ring Terminal, #, Wire Range --- to 0 Gauge -00-0P Ring Terminal, #0, Wire Range --- to 0 Gauge -00-0P Ring Terminal, /, Wire Range --- to 0 Gauge P Ring Terminal, /, Wire Range --- to 0 Gauge P Ring Terminal, #0, Wire Range --- to Gauge P Ring Terminal, /, Wire Range --- to Gauge -00-0P Ring Terminal, #0, Wire Range --- to Gauge -09-0P Ring Terminal, /, Wire Range --- to Gauge -0-0P Spade Terminal, / x /, Wire Range --- to Gauge P Spade Terminal, /, Wire Range --- to 0 Gauge F Spiral Wrap, / Diameter x ft lg F Spiral Wrap, / Diameter x ft lg U-0P0 Tube, Heat Shrink, / ID x -/ lg -00-0P Ty-Raps, -/ inches lg -00-0P Ty-Raps,.00 inches lg -000 Series Wire Markers P SW0 Compressor Oil, Castrol Icematic (Quart) Sealant, Pipe (Used to seal fittings on unit with R-a). TOOLS Temperature Tester (Simpson Meter) Temperature Test Lead ( Foot) Temperature Test Lead (0 Foot) Adapter, Males (Both Ends) (Use with Temperature Tester) Case, Carrying (Used with 0-000) Wrench, Compressor Sight Glass 0-00 Inspection Light with Mirror 0-00 Volt-Ohmmeter, Digital Amprobe Clamp (Used with 0-00) 0-00 Wrench, Service Valve Volt-Ohmmeter, Digital (Fluke) Pin Extender, Plug Connector Pliers, Crimping (Used for compressor terminal block replacement) Grip, Wire Vise (Used for compressor terminal block replacement) Crimper, Micro Contact Pins Kit, Static Dissipative (Used for working on electronic components) Ground Strap, Wrist (Used for working on electronic components) Gauge Set, Manifold --- Fahrenheit/PSI (For R-a) Gauge Set, Manifold --- Centigrade/KPA (For R-a) Detector, Leak (For R-a) Extractor, Integrated Circuit (For Eprom removal) Insertion, Integrated Circuit (For Eprom installation and pin straightener)

7 . REFRIGERATION UNIT ASSEMBLY. REFRIGERATION UNIT -- FRONT 0 9

8 . REFRIGERATION UNIT -- FRONT --- Panel, Access & Evaporator Fan Motor --- Refer to Section Labels and Decals --- Refer to Section. Valve, Thermostatic Expansion (Location) --- Refer to Section NT- Box, Control --- Refer to Sections. to. Handle (Optional) --- 9NT Handle, Hinged (Optional) Coil, Condenser --- Refer to Section Receiver and Tubing or Water-Cooled Condenser --- RefertoSection.9or Gauge, Pressures --- Refer to Section.0 Compressor --- Refer to Section.0 or Cable, Power --- Refer to Section. Plug, Power --- Refer to Section Guard, Compressor --- Refer to Section.0 Connector, Interrogator --- Refer to Sections. to Vent, Fresh Air Makeup --- Refer to Section. Recording Thermometer (Optional) --- Refer to Section NT- 9NT-0 Cover, Blank (For Unit without a Recording Thermometer) Cover, Blank (For Unit without a Recording Thermometer) 9NT Motor, Condenser Fan --- Refer to Section NT-- 9NT-- Cable Assembly, Rear (Transfresh) (I) Cable, Power --- AC (Transfresh) (I) 9NT-- 9NT-- Cable Assembly, AC (Transfresh) (I) Hose Assembly, Air (Transfresh) (I) 9NT-- Fuse Assembly, In-line (Transfresh) (I)

9 . CONTROL BOX DOOR Control Box Control Box Door HINGE ASSEMBLY -- SECTIONAL VIEW DOOR ASSEMBLY -- PARTIAL BACK VIEW

10 . CONTROL BOX DOOR U-- Screw, Retaining Washer, Retaining Washer, Mylar 9NT-- Door Assembly --- Includes: 9NT-- Door Assembly, Locking 9NT Includes: Gasket, Door 9NT- Door Assembly (Display) --- Includes: S Bezel Hinge with Spring 9 U-- Rivet, Blind, / Diameter, Grip Range ---/-/ (I) 0 U-9- Washer, Plain --- Special --- SST 9NT- Door Assembly (Display) --- Includes: 9NT-9 Gasket Latch U- Screw, Pan Head, #- X / lg --- SST (I) U-- Washer, Flat, # --- SST (I) Locknut, #- --- SST (I) 9NT- Strike U-- Washer, Flat, # --- SST (I) Locknut, #- --- SST (I) Gasket (Display Bezel) 0 U-- Washer, Lock, #0 --- SST (I) Screw, Oval Head, #0- x / lg --- SST (I) U-- Washer, Flat, #0 --- SST Locknut, # SST (I) Pocket, Placecard Hinge (Used on Door Assembly 9NT--) Hinge Assembly (I) --- Includes: Hinge, Half Hinge, Half Pin Assembly, with Tether U-0- Screw, Truss Head, #0- x / lg --- SST (I) Protector, Mylar, Hinge (Used between hinge and unit frame) -0-0 Retainer, Nut Protector, Mylar, Hinge (Used between hinge and door) 0 U-0- Screw, Truss Head, #0- x / lg --- SST (I) Washer, Mylar, 0.0 ID x 0.0 OD

11 . CONTROL BOX DOOR -- 9NT SIDE VIEW Control Box Control Box Door 9 0 HINGE ASSEMBLY -- SECTIONAL VIEW DOOR ASSEMBLY -- PARTIAL BACK VIEW

12 . CONTROL BOX DOOR -- 9NT0-9- 9NT-- Door Assembly --- Includes: Gasket, Door U-- Washer, Lock, #0 --- SST (I) U-- Washer, Flat, #0 --- SST Locknut, # SST (I) Pocket, Placecard Window, Lexan, 0. x. x. thick (I) Gasket (Used between window and backup plate) 9 9NT-9 Plate, Backup, / thick --- Aluminium (I) Rivet, Blind, / Diameter, Grip Range --- /-/ (I) Protector, Mylar, Hinge (Used between hinge and door) U-- Screw, Retaining Washer, Retaining Washer, Mylar U--0 Screw, Retaining Hinge Assembly (I) --- Includes: Hinge, Half Hinge, Half Pin Assembly, w/tether U-- Screw, Truss Head, #0- x / lg --- SST (I) Protector, Mylar, Hinge (Used between hinge and unit frame) Retaining, Nut 0 U-0- Screw, #0- x / lg --- SST (I) Washer, Mylar

13 . CONTROL BOX

14 . CONTROL BOX 9NT0-90 Shield, High Voltage --- Includes: Hinge U-- Stud, / Turn U-9- Retainer CH-0- Label, Danger --- High Voltage U- Meter, Hour --- Optional --- Pocket, Placard --- Refer to Section. or NT0-- Plate, Schematic & Diagram (I) --- 9NT0-9- 9NT0-- Plate, Schematic & Diagram (I) --- 9NT0-9-, -, - 9NT0-- Plate, Schematic & Diagram (I) --- 9NT0-9- 9NT0-- Plate, Schematic & Diagram (I) --- 9NT0-9- 9NT0-- Plate, Schematic & Diagram (I) --- 9NT0-9- 9NT0-- Plate, Schematic & Diagram (I) --- 9NT0-9- 9NT0--9 Plate, Schematic & Diagram (I) --- 9NT0-9- 9NT0--0 Plate, Schematic & Diagram (I) --- 9NT0-9- 9NT0-- Plate, Schematic & Diagram (I) --- 9NT

15 . CONTROL BOX -- HIGH VOLTAGE SHIELD REMOVED Cool Heat Defrost In range Alarm 9 SETPOINT/Code AIR TEMP/Data DataCORDER UNITS WITH ONE-SPEED EVAPORATOR MOTOR UNITS WITH TWO-SPEED EVAPORATOR MOTOR 0

16 . CONTROL BOX -- HIGH VOLTAGE SHIELD REMOVED Contactor, Compressor (0 Amp) PL Contactor, Compressor (0 Amp) 9NT0-9- Screw, Hex Head, #0- x / lg --- SST A/R PL Washer, Lock, #0 --- SST Contactor, Condenser/Evaporator Fan Motor & Heater (CF, EF & HR) A/R U Receptacle, Retaining (For High Voltage Shield) Kit, Transformer Current Block, Terminal (I) Controller Box, Microprocessor --- Refer to Sections. and NT Bracket (Latch/Lock) --- Optional (I) Receptacle, Retaining (For Control Box Door) Receptacle, Communications (RMU) (Plastic) --- Optional Plug, Communications (RMU) --- Optional -0-0 U- Cap and Chain (RM) --- Optional Gasket, Receptacle --- Optional 0-00 U-9 Switch, Toggle (MDS) Seal, Bushing A/R 0-00 U- Switch, Toggle (ST) Transformer, Control HY0FJ00 Fuse Block Fuse, amp U-- Fuse, amp (Slow Blow) Circuit Breaker vac (CB) U--9 AUJR0 Screw, Pan Head, #- x / lg --- SST (I) Washer, Lock, # --- SST (I) 9NT Transformer, Potential Screw, Roundhead, #- x / lg --- SST (I) CH Label, (PT) (I) Circuit Breaker --- 0vac 0 Amp (CB) (See Model Chart) Plate, Blank Off (CB) (I) Switch,Voltage (GreyorWhiteBody)(SeeModelChart) SV Handle (For P/N 0-0-0) --- Includes: Tightening Element (For P/N 0-0-0) Switch,Voltage (Green Body) (See Model Chart) Starting with Serial Number Includes: S Handle (For P/N ) --- Includes: Screw, Handle (For P/N ) Switch,Voltage ( Station) (See Model Chart) SV Handle (For Station) --- Includes: Tightening Element SV Contactor, Evaporator Fan Motor (ES) (See Model Chart) --- Includes: Contactor Contactor, Auxiliary Switch, Toggle (BMS) 9NT Switch, Toggle (CFS) 9NT0-9-, 9NT0-9-9

17 . CONTROL BOX -- MICROPROCESSOR CONTROLLER BOX COVERS REMOVED

18 . CONTROL BOX -- MICROPROCESSOR CONTROLLER BOX * 9NT-- Controller Box, Micro 9NT0-9-, Includes: * 9NT-- Controller Box, Micro 9NT0-9-, -, -, -, Includes: * 9NT--9 Controller Box, Micro 9NT0-9-, - & 9NT Includes: 9NT0-9-SV Cover --- Includes: 9NT- Gasket 9NT-9-SV Plate --- Includes: 9NT- Gasket Board, Logic --- NEW --- Includes: Battery, Lithium,. Volt -0-00SV Board, I/O --- NEW -0-0SV Board, I/O --- Remanufactured * 9NT-- Controller Box, Micro 9NT Includes: Board, Logic --- NEW 9NT Includes: Board, Expansion Battery, Lithium,. Volt Board, Logic --- Remanufactured --- Includes: Battery, Lithium,. Volt Board, Logic --- Remanufactured 9NT Includes: Board, Expansion Battery, Lithium,. Volt Cable, Ribbon Kit Gaskets, Cover Kit Gaskets, Controller Box * NOTE: Indicates the items that may be order as remanufactured parts by adding RM to the end of the part number. Example 9NT--RM is a remanufactured 9NT--.

19 . CONTROL BOX -- MICROPROCESSOR CONTROLLER BOX -- COVER REMOVED 0 PK PB PD PC PE PH PM PA COVER REMOVED 9 Cool Heat Defrost In range Alarm SETPOINT/Code AIR TEMP/Data DataCORDER

20 . CONTROL BOX -- MICROPROCESSOR CONTROLLER BOX -- COVER REMOVED Spacer, Nylon U Washer, Flat, / --- SST Capscrew, Hex Head, /-0 x -/ lg --- SST (I) SV Cover --- Refer to Section. Connector, Plug (PK) --- Includes: SV Socket, Terminal Connector, Plug (PB) --- Includes: SV Socket, Terminal Connector, Plug (PD) --- Includes: SV Socket, Terminal Connector, Plug (PC) --- Includes: SV Socket, Terminal Connector, Plug (PA) --- Includes: Socket, Terminal Connector, Plug (PM) --- Includes: SV Socket, Terminal Connector, Plug (PE) --- Includes: Socket, Terminal Suppressor, RFI, 0. I.D Suppressor, RFI, 0. I.D. Suppressor, RFI, 0.0 I.D. (Location) SV Display Assembly --- Includes: Gasket Keypad Board, Annunciator Board, Digital Display --- NEW --- Includes: Display, LCD -0-9NT0- Board, Digital Display --- Remanufactured Cover (Behind Display) Cable, Ribbon Assembly --- Refer to Section. Hinge --- 9NT- Bracket Assembly, Display (I)

21 . CONDEER FAN MOTOR AND COIL SECTION NT0-9-9

22 . CONDEER FAN MOTOR AND COIL SECTION 9NT-- Cover, Condenser Coil 9NT-0-SV 9NT-0 Coil, Condenser (Copper) --- Includes Mylar Washers Protector (Apply between frame and coil & coil cover) U-- U-- Capscrew, Hex Head, /-0 x / lg --- SST (I) Washer, Flat, / --- SST Washer, Mylar,/ ID X / OD Washer, Mylar,/ ID X.00 OD Washer, Mylar,/ ID X 9/ OD Protector, Mylar (Apply between coil mounting & frame RH side) Protector, Mylar (Apply to top side center coil mounting) Protector, Mylar (Apply between coil mounting & frame, RH & LH sides) Protector, Mylar (Apply to center between frame & coil & coil cover) Protector, Mylar (Apply to top side of coil bracket, RH & LH sides) Protector, Mylar (Apply under coil center bracket attached to frame) Protector, Mylar (Apply between coil & coil cover, RH & LH sides) -00-9NT- Protector, Mylar (Apply between coil mounting & frame LH side) Grille and Venturi Assembly --- 9NT NT Grille --- Includes: Stud, / Turn Washer, Retaining Receptacle 9NT0-- PL Venturi (For -/ diameter Fan) Rivet, Blind, / Diameter, Grip Range---/-/ --- SST 9NT- PL Hinge Rivet, Blind, / Diameter, Grip Range---/-/ --- SST SV Fan, Condenser (-/ diameter) --- SST --- Includes: Fan, Condenser (-/ diameter) (Painted Steel) NT0-9-, Includes: Fan, Condenser (-/ diameter) (Plastic) --- 9NT Includes: PL SV Set Screw,Square Head, /- x / lg --- SST Motor, Condenser Fan --- Includes: PL Key, / Square x -/ lg --- SST Bearing U--9 Capacitor Screw, Hex Head/Washer, /- x lg --- SST (I) Washer, Flat, / --- SST (I) Washer, Mylar Locknut, /- --- SST (I) 9NT Protector, Condenser Fan Motor Mounting Washer, Mylar, / ID x 9/ OD U Screw, Retaining Washer, Retaining --- Nylon U-0 Hinge Screw, Truss Head, #0- x / lg --- SST (I) U-- U-- Washer, Lock, #0 --- SST (I) Washer, Flat, #0 --- SST Protector, Mylar (Apply between Grille Hinge and Frame) Protector, Mylar (Apply between Grille and Retaining Nut) -0-0 Nut, Retaining

23 .9 RECEIVER AND TUBING SECTION (STS) (SRS)

24 .9 RECEIVER AND TUBING SECTION U-- Valve, Liquid Line --- Starting with Serial #9090 U- Valve, Liquid Line --- Includes: Cap, Flare --- / Cap, Valve Elbow, Swivel, 90_ / Flare x M --- Brass Coupling, M --- Brass --- Includes: Cap, Service Port Sensor, Thermistor (AMBS, CPSS & CSAS) Indicator, Moisture --- Liquid 9 U-- Filter-Drier 0 9NP0-0 Clamp --- Includes: F Gasket ( ft, Cut to length) A/R U-- Screw, Hex Head, /-0 x / lg (I) A/R Washer, Mylar, / ID x.00 OD -00- Plug, Fusible, / nptf --- Brass Disc, Rupture, / npt 9NT0-9-9 U-- Washer, Flat, / --- SST A/R Protector Protector, Mylar 9NT-9- Receiver Painted Steel --- Includes: 9NT0-9-, -, - 9NT0-9- Receiver (See Model Chart) SST --- Includes: -00 Glass, Sight Glass, Sight, with Red Balls 9NT Sensor Assembly (SRS & STS) Sensor, Thermistor (CPDS) Valve, Pressure Regulator --- Valve, Modulating Solenoid --- Refer to Section Valve, Suction Solenoid --- Refer to Section Valve, Quench, Thermostatic Expansion 9

25 .0 WATER-COOLED CONDEER

26 e ITEM.0 WATER-COOLED CONDEER --- 9NT- Condenser/Receiver (SST) 9NT Includes: Items & 9NT-9- Condenser/Receiver --- Includes: -00 Sight Glass (White Ball) --- Includes: S Ball, Float Protector, Mylar Protector, Mylar U-- Coupling (Water-In) Sight Glass (Red Ball) 9NT0-9-9 U- Cap, Dust 0-09 Coupling, Self Draining --- Includes: Seal, O-Ring 0 U- Cap, Dust -00-0SV Switch, Water Pressure DD9CA0 Cap, Flare Seal --- Brass 9NT0-9-9 & 9NT Disk, Ruptured, / npt U-- Bolt, Hex Head, /- x.00 lg --- SST (I) U-- Washer, Flat, / --- SST (I) AUJR Washer, Lock, / --- SST Washer, Mylar, / ID x.00 OD U-- Capscrew, Hex Head, /-0 x / lg --- SST (I) A/R U-- Washer, Flat, / --- SST A/R Washer, Mylar, / ID x / OD

27 . EVAPORATOR FAN MOTOR AND ACCESS PANEL SECTION EFM- (Location) EFM- (Location)

28 . EVAPORATOR FAN MOTOR AND ACCESS PANEL SECTION 9NT NT0-90- Panel, Access --- Includes: Panel, Access 9NT Includes: -00 U--F0 Gasket Gasket, Access Panel Seal --- Adhesive Back, AA0JA0 PressureSensitive,x/thick(0ft,Cuttolength) Capscrew, Hex Head, /-0 x lg --- SST A/R A/R AN9OC Washer, Flat, / --- SST Washer, Mylar,/ ID X / OD A/R 9NT0-9- 9NT0-9- Panel, Access --- Includes: Panel, Access 9NT Includes: NT- Gasket Bracket, Motor Mount Capscrew, Hex Head, /- x -/ lg --- SST (I) Washer, Flat, / --- SST (I) Locknut, /- --- SST (I) Motor, Evaporator Fan (Two-Speed) (See Model Chart) --- Includes: PL Key, / x / x -/ lg --- SST Bearing Capacitor PL Motor, Evaporator Fan (One-Speed) (See Model Chart) --- Includes: Key, / x / x -/ lg --- SST Bearing Capacitor -00 PL Fan, Evaporator (EFM-) --- Includes: Setscrews, /- x / lg --- SST -00 PL Fan, Evaporator (EFM-) --- Includes: Setscrews, /- x / lg --- SST U-- U-- Bolt, Hex Head, /- x.00 lg --- SST (I) Washer, Flat, / --- SST (I) 9 AUJR 9NT0- Washer, Lock, / --- SST Bracket, Mounting

29 . EVAPORATOR COIL SECTION -- REAR PANELS REMOVED NT0-9-9

30 . EVAPORATOR COIL SECTION -- REAR PANELS REMOVED 9NT0 --- Shield Assembly, Rain --- Humidistat (I) --- Optional -00 Humidistat (HCS) (See Model Chart) --- Optional Sensor Assembly (RRS) Sensor Assembly (RTS) --- Sensor, Thermistor (Partlow) --- Refer to Section. --- U-9- Thermostat, Defrost (DTT), _F (_C) U-9- Thermostat, Defrost (DTT), _F (_C) 9NT Capscrew, Hex Head, #- x / lg --- SST (I) U-9- Thermostat, High Temperature (HTT), 0_F (_C) 9 AA0JA Capscrew, Hex Head, /-0 x / lg (I) 0 AUJR Washer, Lock, / --- SST (I) 0 9NT-9- Coil, Evaporator Does not include thermostats or heaters 9NT- Retainer (For Heaters) 9NT- Clip (For Heaters) U-- Capscrew, Hex Head, /-0 x / lg --- SST (I) 9 U-- Washer, Flat, / A/R U-- Screw, Lag, / x lg Tee Heater, Drain Pan Dummy Receptacle U- Gasket 9NT0-- Sensor Assembly (USDA) (See Model Chart) --- Includes: Connector Assembly (90_) --- Includes: 0 S Plug S Clamp, Cable S Bushing * Pin (Gold Plated) Cap and Chain Receptacle Interrogater --- Pin (ICR) Plug * Socket, Contact (Silver Plated) A/R * Socket, Contact (Gold Plated) A/R Receptacle --- Pin (PR, PR, PR) Exchanger, Heat Screw, /-0 x -/ lg --- SST (I) 9NT-9- Washer, Fender, / Thick --- SST (I) U-- Heater Plug, Hole ( inch diameter) (Located on Fan Deck) * NOTE: Do not mix silver with gold pins and sockets.

31 . EVAPORATOR COIL SECTION -- REAR PANELS ATTACHED 9 0 MODELS -- 9NT0-9-,-,-,-,-,- UNITS WITH BOLTED PANELS 9NT0- Grille, Top U-- Rivet, Blind, / Diameter, Grip Range --- /-/ (I) A/R 9NT0-- Panel Assembly, Upper --- Includes: S Drain Pan, Side S Drain Pan, Center 9NT-9 Panel, Bottom 9NT- Duct, Air (Location --- Behind Bottom Panel) (I) U-- Rivet, Blind, / Diameter, Grip Range --- /-/ (I) A/R U-- Rivet, Blind, / Diameter, Grip Range --- /-/ (I) A/R 9NT0- Door, Access --- Includes: U-0- Hinge Stud, / Turn Washer, Lock -00- Receptacle, Retaining Rivet, Blind, / Diameter, Grip Range --- /-/ --- SST (I) 0 9NT-- Spacer, Hinge (I) 9NT-9 Plate (I) 9NT-9- Panel, Bottom, Side (For heat exchanger) Screw, Machine, Truss Head, #0- x / lg --- SST (I) 9 9NT-9 Washer, Fender, #0 x.00 OD --- SST (I) 9 U-0-F Gasket ( ft, Cut to length) A/R

32 . EVAPORATOR COIL SECTION -- REAR PANELS ATTACHED (CONTINUED) MODELS -- 9NT0-9-,-, -9 & 9NT0-9- UNITS WITH BOLTED PANELS 9NT0- Grille, Top 9 U-- Rivet, Blind, / Diameter, Grip Range --- /-/ (I) A/R 0 U-9- Rivet, TIR, / Diameter, Grip Range --- /-/ (I) 9NT0-- Panel Assembly, Upper --- Includes: S Drain Pan, Side S Drain Pan, Center U-- Rivet, Blind, / Diameter, Grip Range --- /-/ (I) A/R U-- Rivet, Blind, / Diameter, Grip Range --- /-/ (I) A/R 9NT-9- Panel, Bottom 9NT- Duct, Air (Location --- Behind Bottom Panel) (I) 9NT0-9-,-,-9 9NT-9- Panel, Bottom (Provision for heat exchanger location) Screw, Machine, Truss Head, #0- x / lg --- SST (I) 9 9NT-9 Washer, Fender, #0 x.00 OD --- SST (I) 9 U-0-F Gasket ( ft, Cut to length) A/R

33 . EVAPORATOR COIL SECTION -- REAR PANELS ATTACHED (CONTINUED) MODEL -- 9NT0-9- UNITS WITH HINGED PANELS 9 9NT0- Grille, Top 0 U-- Rivet, Blind, / Diameter, Grip Range ---/-/ (I) 9NT0- Panel, Upper --- Includes: S Drain Pan, Center S Drain Pan, Side 9NT-9 Panel, Bottom 9NT- Duct, Air (Location --- Behind Bottom Panel) (I) U-- Rivet, Blind, / Diameter, Grip Range --- /-/ (I) U-- Rivet, Blind, / Diameter, Grip Range --- /-/ (I) 9NT0- Door, Access --- Includes: U-0- Hinge Stud, / Turn, 0.9 lg Washer, Retaining Receptacle, Retaining Rivet, Blind, / Diameter, Grip Range --- /-/ (I) 0 9NT-- Spacer, Hinge (I) 9NT-9 Plate, Stiffener (I) 9NT-9- Plate, Bottom, Side (For Heat Exchanger access) 9NT- Hinge Stud, / Turn, 0.9 lg Stud, / Turn,.0 lg 9

34 . RECORDING THERMOMETER (PARTLOW) -- PRIOR TO SERIAL NUMBER Recording Thermometer (See Model Chart) --- Includes: Cover Assembly (Bottom Latch) --- Includes: Seal, Cover --- Rubber Gasket, Cover Glass Glass, Cover Catch Assembly, Cover Kit, Stylus --- Includes: S Screw, Round Head, #- x / lg Mechanism Assembly Rod, Push (Includes Setscrews) Clip, Key Mounting Key, Clock Winding Nut and Chain, Chart (Sonceboz Clock) Nut and Chain, Chart (Gluck Clock) 0 PL Screw, Round Head #- x / Platen, Chart Flange, Chart Drive (Sonceboz) Flange, Chart Drive (Gluck) Clock, Day, CCW (Counterclockwise) Stand, Mounting, Chart Drive Case (Top Hinge) O-Ring, Element Flange Element, 9 ft lg --- Includes: Sensor, Thermistor (Accessory and Jack) --- ft lg ---0 Pin (Use with Partlow Thermistor Assembly) Screw, Flange (I) Charts _F --- Day (Box of 0) (---0_F to+0_f) A/R Charts _C --- Day (Box of 0) (---_C to+_c) A/R Kit, Hinge Replacement --- Includes: S Hinge S Hardware, Mounting 9

35 . RECORDING THERMOMETER (PARTLOW) -- STARTING WITH SERIAL NUMBER

36 . RECORDING THERMOMETER (PARTLOW) -- STARTING WITH SERIAL NUMBER * Recording Thermometer --- Includes: Cover Assembly (Bottom Latch) --- Includes: Seal, Cover --- Rubber Gasket, Cover Glass Glass, Cover Catch Assembly, Cover Kit, Stylus --- Includes: S Screw, Round Head, #- x / lg Mechanism and Platen Assembly Main Lever and Push Rod Assembly (Includes Setscrews) Rod, Push Key, Clock Winding Nut and Chain, Chart (Sonceboz Clock) Nut and Chain, Chart (Gluck Clock) 0 PL Screw, Round Head #- x / Flange, Chart Drive (Sonceboz) Flange, Chart Drive (Gluck) Clock, Day, CCW (Counterclockwise) Case (Top Hinge) O-Ring, Element Flange Element, 9 ft lg --- Includes: Sensor, Thermistor (Accessory and Jack) --- ft lg -0 Pin (Use with Partlow Thermistor Assembly) Screw, Flange (I) Charts _F --- Day (Box of 0) (---0_F to+0_f) A/R Charts _C --- Day (Box of 0) (---_C to+_c) A/R * Mounting Kit -00 must be used if Partlow Recorder P/N is replaced with Partlow Recorder P/N on units prior to S/N

37 . THERMOSTATIC EXPAION VALVE -- Alco Alco Part Nos. A-A A-A A-A A-A A-A A-A -00- Kit, Repair --- Includes: S PowerHeadAssemblyandGasket,Item S Cage Assembly and Gasket, Item U- Gasket Set, Universal --- Includes: S Gasket, Body Flange A-A S Gasket, Seat --- A-A U-- Flange, Body (I) Coupling, M --- Brass --- Includes: Cap, Service Port

38 . SUCTION SOLENOID VALVE ALCO Solenoid Valve, Suction --- Includes: Cap, Snap Coil Kit, Repair Kit, Repair Diaphragm

39 . MODULATING SOLENOID VALVE 9 * Kit, Enclosing Tube & Coil Housing --- Includes: Nut, Coil --- Includes: S Nut, Coil S O-Ring, Coil Nut Housing, Coil --- Includes: S Housing, Coil * S Plate, Coil Bottom S O-Ring, Coil Bottom Plate 9 S Sleeve, Solenoid Coil 0 S Tube Assembly, Coil Plate & Enclosing Valve, Modulating Solenoid --- Includes: Coil, Solenoid --- Includes: 9 S Sleeve, Solenoid Coil * NOTE: Coil bottom plate is only supplied in Kit as a separate item for use on early style enclosing tube assemblies.

40 .9 NITROGEN FEED --- Valve Assembly, Pressure Relief --- Customer Supplied U-- Screw, Hex Head, /-0 x.00 lg --- SST (I) U-- Washer, Flat, / --- SST 9NT-0- Rivet, Blind, / Diameter, Grip Range / - / --- SST (I) --- Bracket Assembly --- Customer Supplied Protector, Mylar (I) --- Tube Assembly, Nitrogen Feed --- Customer Supplied

41 .0 COMPRESSOR MOUNTING AND GAUGES without gauges with gauges with gauges -- 9NT0-9-9 COMPRESSOR FOOT CUTAWAY VIEW CENTER CYLINDER HEAD VIEW UNIT SECTIONAL VIEW 9NT0-9-, - & 9NT0-9-

42 .0 COMPRESSOR MOUNTING AND GAUGES --- Compressor --- Refer to Section Snubber Assembly U-9- Switch, High Pressure 9NT- Tube Assembly, High Pressure 9NT- Tube Assembly, Low Pressure 9NT0-9 Stiffener Assembly U-- Screw, Hex Head, #0- x / lg --- SST Used to mount U-- Washer, Flat, #0 --- SST (I) stiffener assembly 9NT0-9 Bracket Assembly, Gauge --- Optional -0-0 Gauge, Suction Pressure --- Optional Gauge, Discharge Pressure --- Optional Washer, Mylar, 0.0 ID x 0.00 OD CAJA0 Tee, / npt (I) Used with 0DA0- Valve Assembly, Core, Check --- Brass Pressure Gauge Valve, Pressure Relief --- Low Side Tee, Male, / fpt x / fpt x / mpt --- Brass Elbow, / mpt x / fpt --- Brass 9NT NT- Protector (Compressor to Compressor Base) AUJR Washer, Lock, / --- SST AA0JA Capscrew, Hex Head, /- x -/ lg --- SST (I) 9NT-0 Base, Compressor U-- Bolt, Hex Head, /- x.00 lg --- SST (I) U-- Washer, Flat, / --- SST (I) Used to mount AUJR Washer, Lock, / --- SST compressor base Washer, Mylar, / ID x.00 OD to unit frame Capscrew, /- x -/ lg --- SST (I) Locknut, /- --- SST (I) U- Washer, Flat, / --- SST Washer, Mylar, / ID x -/ OD 9NT- Panel, Guard (I) 9NT- Panel, Guard (I) 9NT0-9- PL Screw, Hex Head, #0- x / lg --- SST PL Washer, Flat, #0 --- SST Washer, Mylar, / ID x / OD A/R U-- Capscrew, Hex Head, /-0 x -/ lg --- SST (I) A/R -00- Locknut, / SST (I) A/R 9 U-- Washer, Flat, / --- SST A/R 0 9NT-0- Guard, Compressor 0 9NT- Guard, Compressor 9NT0-9-*, -, -9 & 9NT NT- Guard, Compressor 9NT0-9-**,-,- U--9 Capscrew, Hex Head, /- x.00 lg --- SST (I) U-- Washer, Flat, / --- SST Washer, Mylar, / ID X.00 OD Oil, Compressor (Quart) A/R * STARTING WITH SERIAL #90 ** PRIOR TO SERIAL #90

43 . VOLTAGE OPTIO Power Transformer Option NT0-9-,- 9NT0-9- Prior to Serial # NT NT0-9- Starting with Serial #90 9NT0-9-

44 . VOLTAGE OPTIO Plug, Hole, Dupont Zytel (For / to / diameter hole) A/R 9NT- Retaining Clip, Cable --- 9NT Protector, Mylar AUJR Washer, Lock, / --- SST AA0JA0 Screw, Hex Head, /-0 x.00 lg Plug, Hole, Nylon --- Black (For / diameter hole in doghouse wall) A/R Washer, Mylar Cable, Power (0 vac) (I) A/R U-9 Cable, Power (0 vac) (I) A/R Plug, Power (0 vac) Mennekes 9NT0-9-,-,-,-,-, Bushing (For P/N -0-00) (I) Plug, Power (0 vac) 9NT0-9- (I) -0-0 Bushing (For P/N U- & -0-00) (I) 9 U-9- Cable, Power (0 vac) (I) A/R 0 U-- Plug, Power (0 vac) (I) 9NT0-9- A/R -0-0 Bushing (For P/N U--) (I) Transformer, Power (See Model Chart) 9NT- Bracket Assembly, Transformer (I) -00- Locknut, Hex Head, /- --- SST (I) Used to mount Transformer -0-0 Washer, Flat, / --- SST (I) Bracket Assembly 9NT-- Cover Assembly w/latch, Cable Storage (Swing Up) 9NT0-9-**,-,- --- Includes: 9NT- Hinge -0-0 Screw, Hex Head, #-0 x / lg --- SST (I) Washer, Flat, # ---SST (I) Locknut, Hex Head, #-0 (I) Washer, Mylar, / ID x / OD (I) Latch 9NT-- Cover Assembly w/latch, Cable Storage (Swing Down) 9NT0-9-*,- & 9NT Includes: -0-0 Screw, Hex Head, #-0 x / lg --- SST (I) Washer, Flat, # ---SST (I) Locknut, Hex Head, #-0 (I) Washer, Mylar, / ID x / OD (I) Latch 9NT-0 Hinge U-0 Screw, Truss Head, #0- x / lg --- SST (I) U-- Washer, Flat, #0 (I) Locknut, Hex Head, # SST (I) Washer, Mylar, / ID x / OD Protector, Mylar (I) Latch, Catch (Located on compressor guard) 9NT0-9-,-,-,- & 9NT Receptacle, Dummy (For Power Plug) 9RN0-- Holder, Document (I) Cap, Document Holder (I) 9NT- Panel Assembly, Cable Storage Protector, Mylar (I) Washer, Mylar, / ID x / OD -0-0 Retainer, Nut U-0 Screw, Truss Head, #0- x / lg --- SST (I) U-- Washer, Flat, #0 (I) * STARTING WITH SERIAL #90 ** PRIOR TO SERIAL #90 9

45 . FRESH AIR MAKEUP VENT NT- 9NT NT-- 0

46 . FRESH AIR MAKEUP VENT 9NT- Cover, Fresh Air Makeup --- Includes: Gasket, Cover (I) Gasket, Cover (I) U-- Washer, Flat, / --- SST U-- Nut, Wing, / SST 9NT0-9- Cover, Fresh Air Makeup 9NT Includes: 9NT0-9- Cover Assembly, Air Bleed --- Includes: Gasket, Air Exchange 9NT-- Gasket, Cover (I) U-- Washer, Flat, / --- SST U-- Nut, Wing, / SST 9 9NT-- Gasket, Cover (I) 0 9NT-0 Label, Air Bleed (I) 9NT-- Gasket, Cover (I) 9NT-- Cover, Fresh Air Makeup (With Air Bleed) 9NT0-9-,-, Includes: 9NT0-9- Cover Assembly, Air Bleed --- Includes: Gasket, Air Exchange (I) 9NT- Label, Air Exchange (I) U-- Washer, Flat, / --- SST PL Nut, Hex, /-0 UNC-B --- SST Washer, Mylar, / ID x.00 OD Gasket, Cover (I) Gasket, Cover (I) 0 9NT- Bushing

47 . LABELS AND DECALS 9 0

48 . LABELS AND DECALS Decal, Carrier Transicold Thinline (I) U-9 Label, Direction Arrow 9NT- Label, Humidistat (I) 9NT-9 Label, Fan Warning (I) 9NT-9 Label, Fan Warning (I) --- 9NT0-9-, - 9NT-9 Label, Fan Warning (I) --- 9NT0-9- & 9NT0-9- 9NT-09 Label, Function Code (I) --- 9NT0-9-, -, -, -,-9 9NT- Label, Function Code (I) --- 9NT0-9-, -, -, -, - & 9NT0-9- 9NT-9 Label, Operating (I) --- 9NT0-9- & 9NT0-9- 9NT-9 Label, Operating (I) --- 9NT0-9-, - 9NT-0 Label, Operating (I) --- 9NT0-9-, -, -, - 9NT-9 Label, Operating (I) --- 9NT0-9-, -,-9 9NT- Label, Humidity Control Sensor (I) 9NT-9 Label, Micro Link (I) Label, Charge with R-a --- 9NT0-9- & 9NT Label, Charge with R-a (I) Label, POE Compressor Oil 9NT- Label, Nitrogen Feed (I) 9NT Label, R-a --- Ozone Protection (I) Label, R-a --- Ozone Protection (I) --- 9NT0-9-, -,-9 CH-00- Label, Arrow (I) 9NT- Label, Air Exchange (I) --- 9NT0-9-, -, -, -, -, - 9NT- Label, Air Exchange (I) --- 9NT0-9-, -,-9 9NT-990 Label, Air Exchange (I) --- 9NT0-9- 9NT-99 Label, Air Exchange (I) --- 9NT0-9- 9NT-0 Label, Fresh Air (I) --- 9NT0-9-, -,-9 9NT- Label, Economy Mode --- 9NT NT- Label, USDA (Located on rear bottom panel) --- 9NT0-9-, - 9NT- Label, USDA (Located on rear upper panel) --- 9NT NT- Label, Peel Off (Placed on item, over note ) --- 9NT NT-9 Label, Economy Mode (Located on inside of control box door) --- 9NT0-9-9

49 . ACCESSORIES. INTERROGATOR AND PORTABLE/PERSONAL COMPUTER CONNECTIO Portable/Personal Computer 9 Purchase cable locally Printer Purchase cable locally 0 Portable/Personal Computer PARALLEL PRINTING Portable/Personal Computer Printer SERIAL TO PARALLEL PRINTING Printer Portable/Personal Computer SERIAL PRINTING

50 . INTERROGATOR AND PORTABLE/PERSONAL COMPUTER CONNECTIO Software, PC/DOS (. Diskette) Software, PC/DOS (. Diskette) Adapter, DBM to DB9F ( pin male to 9 pin female) Cable, Unit to PC Battery Pack with Charger Cable, Battery Pack to PC Cap & Chain 9NT0-- Connector, Interrogator (Optional) (I) --- Includes: Receptacle Pin, Contact Plug -0-0 Contact -0-0 Contact 9 9NT0- Bracket, Interrogator Connector (Optional) Microbuffer, Mini Cable, PC or Printer 9NT0-9 Sensor Assembly, USDA Cold Treatment --- Includes: Pin

51 . INTERROGATOR AND HUSKY /0 COMPUTER CONNECTIO Husky /0 9 0 Printer Husky /0 SERIAL PRINTING Purchase cable locally Husky /0 Printer SERIAL TO PARALLEL PRINTING

52 . INTERROGATOR AND HUSKY /0 COMPUTER CONNECTIO Interrogator Kit, Field (Optional) --- Includes: --- S Computer, Husky /0 (I) --- Includes: Manual, Husky /0 Operator (I) PL Batteries, AA Alkaline Case (for Husky /0) (I) Software, PC/DOS (. Diskette) Software, PC/DOS (. Diskette) -0-0 Cable, Unit to Husky / Interrogator Kit, Desktop (Optional) --- Includes: Disk Drive,. DS/HD for Husky /0 (I) Software, PC/DOS (. DS/DD Diskette) Software, PC/DOS (. DS/DD Diskette) Battery Charger --- AA NiCad (I) Battery Pack, Rechargeable --- AA NiCad (I) Cable Assembly (Husky /0 to PC or printer) Cap & Chain 9NT0-- Connector, Interrogator (Optional) (I) --- Includes: Receptacle Pin, Contact Plug -0-0 Contact -0-0 Contact 9NT0- Bracket, Interrogator Connector (Optional) Microbuffer, Mini (for Husky to parallel Printer)

53 . INTERROGATOR AND HUSKY HUNTER COMPUTER CONNECTIO Husky Hunter Computer 9 0 Husky Hunter Computer Portable/Personal Computer FILE TRAFER Husky Hunter Computer Printer SERIAL TO PARALLEL PRINTING

54 . INTERROGATOR AND HUSKY HUNTER COMPUTER CONNECTIO Software, Husky Hunter Menu Program (. Diskette) Software, Husky Hunter Menu Program (. Diskette) -0-0 Software, DataREADER Program (. Diskette) Husky Hunter Computer --- K Memory (NLO) Case (For Husky Hunter Computer) (I) Cable, Unit to Husky Hunter Battery Pack with Charger Cable, Battery Pack to Husky Hunter Cap & Chain 9 9NT0-- Connector, Interrogator (Optional) (I) --- Includes: Receptacle Pin, Contact Plug -0-0 Contact -0-0 Contact 0 9NT0- Bracket, Interrogator Connector (Optional) Adapter, DBM to DB9F ( pin male to 9 pin female) Cable, Husky Hunter to PC or Printer Microbuffer, Mini (for Husky to parallel Printer) 9NT0-9 Sensor Assembly, USDA Cold Treatment --- Includes: Pin 9

55 . BATTERY AND CHARGER MODULE NT0-- Battery Box Assembly --- Includes: * Kit, Charger Board --- Includes: * Board, Charger Screw, Machined Round Head, #- x / lg --- SST (I) Washer, Flat, # --- SST (I) Washer, Mylar, 0. ID x 0. OD (I) Nut, Lock, #- UNC-B (I) 9NT0-- Battery Box Assembly --- Includes: Charger, Battery Connector, Receptacle 9 9NT0- Receptacle Assembly --- Includes: Holder, Fuse, In-line HY0FJ0 Fuse, Amps -0-0 Contact (Pin Type) Receptacle Gasket, Receptacle (I) 9NT0- Bracket, Battery Gasket, Battery Box (I) 9NT0- Cover (I) -000 Drain, Washer Condensate (Plastic) Gasket, Battery Bracket (I) Plug (for Power Cable and Dummy Plug) -0-0 Socket, Terminal (for Power Cable) 9NT- Label, Charger Battery Box (I) (USDA) 9NT0-9-,-,--9 9NT-0 Label, Charger Battery Box (I) (USDA) 9NT0-9- * Battery, Volt * Contact your RCG Customer Representative. 0

56 . USDA C SIZE BATTERY BOX NT0-99 Battery Box Assembly (I) --- Includes: 9NT-9 Label, Instruction (I) U--0 Retaining, Screw Washer, Retaining -0-0 Receptacle, Retaining 9NT- Door (I) --- Includes: Gasket (I) Holder, Battery Locknut, #- (I) 0 9NT- Bracket (I) Hinge (I) Receptacle Gasket (I) -0-0 Contact (Pin Type) Gasket (I) 9NT- Label (I) Holder, Fuse Fuse, Amp Drain, Washer Condensate (Plastic) Gasket, Battery Box to Unit (I) PL Battery C Size 9

57 . COMMUNICATIO INTERFACE MODULE (RMU) OPTION CONTROL BOX -- SECTIONAL VIEW 9 0

58 . COMMUNICATIO INTERFACE MODULE (RMU) OPTION * Communications Interface Module (RMU), with Connectors (See Model Chart) --- Includes: Module, Communications Interface 9NT SV Module, Communications Interface --- Includes: U-- Fastener U-9- Retainer Connector, Pin Connector, Pin Connector, Pin -0-0 Bushing, Gauge X 0. lg -0-0 Bushing, Gauge X 0. lg 9 9NT0-9 Cable Assembly (I) --- Includes: Connector, Pin -0-0 Bushing, Gauge X 0. lg Contact, Pin 9NT- Bracket Assembly (I) Gasket (I) Gasket (I) 9NT0- Bracket Assembly (I) 9NT0- Bracket Assembly (I) Screw, Hex Head, /-0 X / lg ---SST U-- Washer, Flat, / --- SST * Units provisioned for Communications Interface Module option with Connectors, only need Communications Interface Module P/N SV, See Model Chart.

59 . COMPRESSOR -- MOTOR ASSEMBLY Existing parts on compressor terminal block O-ring Bushing Terminal block Terminal post Wire assembly / Inch diameter heat shrink tubing Compressor junction block / Inch diameter heat shrink tubing

60 . SERVICE REPLACEMENT COMPRESSOR SV Compressor, CFM, 0 vac/ ph/0 hz (See Model Chart) 9NT0-9-, -, -, -, -9 & 9NT SV Compressor, CFM, 0/0 vac/ ph/0 hz (See Model Chart) 9NT0-9-, -, -, -, - NOTE The Service Replacement Motor --- Compressor is sold without terminal box and cover, and without shut-off valves (but with valve pads). Customer should retain the original terminal box and valves for use on replacement compressor.. TERMINAL MOUNTING AND JUNCTION BOX GROUP 9NT0-0 Cover, Junction Box U-- Screw, Hex Head, #0- x / lg (cover to box) --- SST (I) U-- Washer, Flat, #0 (cover to box) --- SST 9NT0--SV Box, Junction (Located on Front of Compressor) --- Includes: 9NT0--SV Box, Junction (Located on Back of 0/0v Compressor) --- Includes: 9NT0-0 Cover, Junction Box PL Screw, Pan Head, #0- x / lg (box to compressor) Terminal, Compressor ( Terminals) Terminal, Compressor ( Terminals) -00 Kit, Compressor Terminal Wiring -00 Kit, Compressor Terminal Wiring (Dual Voltage or Dual/Single Voltage) Gasket, Terminal Plate Washer, Mylar, 0.0 ID x 0.00 OD. SERVICE VALVE GROUP Elbow, / NPTF x M --- Brass Elbow, M x M --- Brass (Used with ) Starting with Serial # Coupling, M --- Brass --- Includes: Cap, Service Port Valve, Suction Shut-Off, -/ ODS Starting with Serial # Valve, Suction Shut-Off, -/ ODS --- Includes: Cap, Seal Gasket, Seal Cap -0-0 Gasket, Suction Service Valve Valve, Discharge Shut-Off, / ODS Starting with Serial # Valve, Discharge Shut-Off, / ODS --- Includes: Cap, Seal Gasket, Seal Cap -0-0 Gasket, Discharge Service Valve 9 U---- Bolt, Hex Head, /- x -/ lg --- SST (I) 0-00 Gasket, Bolt, / Elbow, / NPTF x M --- Brass Elbow, M x M --- Brass (Used with ) Starting with Serial # Coupling, M --- Brass --- Includes: Cap, Service Port. COMPRESSOR -- MOTOR BODY GROUP --- Gasket Set (Refer to Section.) -00 Head, Cylinder --- Side Bank (Shaved Head) Head, Cylinder --- Center Bank Screw, Hex Head --- Center Head, /- x.00 lg --- SAE Grade -00 Gasket, Cylinder Head (Side Bank) Screw, Hex Head, /- x.00 lg --- SAE Grade Screw, Hex Head, /- x.00 lg --- SAE Grade Screen Assembly, Oil Filter -00 Tube, Oil Suction

61 . COMPRESSOR -- MOTOR BODY GROUP (CONTINUED) -0 Valve, Oil Relief -0 Sight Glass Package, Oil Level --- Includes: -0-0 Gasket, Sight Glass -000 Cover, Motor End (I) Gasket, Motor End Cover PL Screw, Hex Head, /- x -/ lg --- SAE Grade -00 Plate, Bottom Gasket, Bottom Plate Screw, Hex Head, /- x.00 lg --- SAE Grade -000 Strainer Assembly, Suction (I) PL Plug, Pipe, Oil Fill, / -00 Check Valve Assembly, Oil Return Plate, Screen Hold Down PL Pipe Plug (High & Low Pressure Connection and Oil Drain), /- NPT -00 Gasket, Cylinder Head (Center Bank). PUMP END GROUP Screw, Hex Head, Bearing Head, /- x.00 lg --- SAE Grade -009 Gasket, Capscrew, / Bearing Head & Gear Oil Pump Package Washer, Thrust Gasket, Cover Plate. CRANKSHAFT, ROD AND PISTON GROUP N/A Crankshaft -009 Washer, Thrust -00 Pin, Spiral, / Diameter x / lg -00 Key, Rotor Drive -0 Washer, Rotor (I) -00 Washer, Star, Rotor, / (I) -00 Tube Assembly, Equalizer (I) Piston & Pin Pkg (Standard) --- Includes: Piston & Pin Pkg (+0.00) --- Includes: A/R 0 S Piston Pin, Piston -00 Retainer, Piston Pin -00 Ring, Compression (For Standard & inch Piston) -00 Connecting Rod and Cap Assembly (Standard) --- Includes: -0 Connecting Rod and Cap Assembly (+0.00) --- Includes: -00 Pin, Dowel -00 Capscrew --- Special (Epoxy Coated). VALVE PLATE GROUP --0 Package, Valve Plate Assembly (Center and Side Banks -- Canted) --- Includes: S Plate Assembly, Valve --- Includes: S Plate, Valve -00 Valve, Discharge 9-00 Valve, Stop Discharge Screw, Hex Head, /- x / lg -0 Washer, Lock, / --00 Valve, Suction -00 Spring, Suction Valve Positioning -00 Gasket, Cylinder Head (Side Bank) -00 Gasket, Cylinder Head (Center Bank) -00 Gasket, Valve Plate -00 Pin, Dowel (Valve Plate)

62 . GASKET SET * Gasket Set --- Includes: Gasket, Suction Service Valve ( Bolt) Gasket, Shaft Seal (0G) Gasket, Valve Plate (0G) Gasket, End Flange (0G) --- Includes: -0 Gasket, Flange Spacer (0G) -00 Gasket, Cylinder Head --- Side Bank (Standard) -00 Gasket, Valve Plate -00 Gasket, Cylinder Head --- Center Bank 9-00 Gasket, Cylinder Head --- Side Bank (Hot Gas Bypass Unloader) 0-0 Gasket, Oil Supply Tube (O-Ring, 0D) -0-0 Gasket, Sight Glass Gasket, Unloader Body Gasket, Oil Pump Cover -0-0 Gasket, Service Valve ( Bolt) * Gasket, Bottom Plate Gasket, Pump End Bearing Head Shaft Seal (0D) Gasket, Motor End Cover Gasket, Cylinder Head --- Side Bank (Suction Cutoff Unloader) * NOTE: When ordering a Gasket Set be aware that it includes one () of item and for a Container Unit the quantity needed is two ().