Series VVXA21/22. Direct Air Operated 2 Port Valve/Manifold For Air, Gas, Vacuum and Oil VC VDW VQ VX2 VX VX3 VXA VN LVC LVA LVH LVD LVQ LQ LVN PA PAX

Transcription

1 The VX series will be revised shortly. 1 Direct Operated 2 Port Valve/ For, Gas, Vacuum and Oil Series VVXA21/22 Common SUP type and individual SUP type (for vacuum use) standard models Compatible with a wide variety of fluids. VC VDW Series VVXA22 Series VVXA21 A wide variety of applicable fluids. Combination of seal materials (NBR, FKM or EPDM) can be selected freely, depending on the purpose. Able to replace valves with the piping remained uchanged. Weight-saving aluminum base and body. Brass base and stainless steel base are available. Please contact SMC for details. VQ VX2 VX VX VXA VN LVC LVA Variations LVH LVD Normally closed (N. C.) Common SUP Individual SUP Valve Material Base, Body Seal Aluminum NBR, FKM, EPDM LVQ LQ LVN TI/ TIL PA PAX Normally open (N. O.) Common SUP Individual SUP Stations B mount 2 to 10 stations base model VVXA211-stations VVXA212-stations VVXA221-stations VVXA222-stations Individual port Common port PB 17--7

2 Series VVXA21/22 The VX* series will be revised shortly. 2 Normally Closed (N.C.), Normally Open (N.O.) JIS Symbol Common SUP type (N.C.) Fluid Standard specifications Option (Standard, Dry) Vacuum (up to 1. x10 2 Pa) (V) Vacuum (up to 1. x10 2 Pa) Turbine oil Carbon dioxide (CO2), Nitrogen gas (N2) Non-leak (10 Ð6 Paám /s or less) (V) Note) Refer to page ÒApplicable Fluids Check ListÓ for details of special fluids outside of the standard options and specifications. (N.O.) Indivisual SUP type (N.C.) Specifications type Number of valves (With O-rings, screws) B Mount Common pressure supply, individual pressure supply (For vacuum) 2to10stations VVXA21 VVXA22 Note) Common port is placed on vacuum side. VX VX (N.O.) Construction/ Principal Parts Material Common SUP type Base and Applicable Valve Part No. base Individual port Applicable valve VVXA211-stations VXA21-00 VVXA212-stations 1 1 VVXA221-stations VXA VVXA222-stations 1 Solenoid Valve for Weight per one station (g) nx70+50 nx Orifice Max.operating Flow characteristics Max. system Proof pressure Weight size Oil pressure pressure differential (MPa) (MPa) (g) (mm ) (MPa) Av x10-6 m 2 Cv converted C [dm /(sábar)] b Cv VXA VXA VXA VXA Note) Refer to ÒGlossaryÓ on page for details of max. operating pressure differential Operating Fluid and Ambient Temperature Operating fluid temperature ( C ) (Standard) Oil (Standard) Vacuum () (V) 60 0 Ð5 (1) Ð5 (2) Note 1) Dew point: Ð5 C or less Note 2) 500 cst or less Note ) ÒVÓ in parentheses is option symbol. Temperature conditions Maximum Minimum Ambient temperature ( C ) 0 0 Ð5 Ð5 (VAC) port No. Description Material Standard Option q Body Aluminum Ñ w Valve NBR, Stainless steel assembly Brass, Polyacetal FKM/EPDM e r Base Piston assembly Aluminum Polyacetal, NBR Ñ Ñ t O-ring NBR FKM/EPDM y Pilot cover Aluminum Ñ u Piston spring Stainless steel Ñ Tightness of Valve (Leak rate) Fluid Seal material NBR, FKM, EPDM 1cm /min or less Liquid 0.1 cm /min or less (1) Non-leak, Vacuum (2) 10 Ð6 Paám /s or less Note 1) Differs depending on the operating conditions such as pressure, etc. Note 2) Value on option ÒVÓ (Non-leak, Vacuum). Pilot Pressure VXA21 VXA22 Pressure (MPa) 0.25 to

3 Direct Operated 2 Port Valve/ For, Gas, Vacuum and Oil How to Order Series VVXA21/22 The VX series will be revised shortly. Orifice size 2 mmø.5 mmø 6 mmø VXA21 VXA22 Refer to the table (1) given below for availability. Table (1) Orifice Size VXA21 VXA22 Orifice size (No.) 2 ( mmø) (.5 mmø) (6 mmø) 00 Valve option Connection 00 (No connection screw) Select an option mark in page by Applicable Fluids Check List for special fluids outside of the standard. Valve/Body 1 Normally closed (N.C.)/ Normally open (N.O.)/ How to Order Base VVXA21 VVXA22 base Symbol Applicable valve VVXA21 VXA VVXA22 VXA How to Order Nil V Write both the base part number and the solenoid valve to be mounted or blanking plate part number. (Example) 7 stations of VXA21 common pressure, individual port 1/8. (Base) VVXA pc. (Valve) VXA pcs. () VX pc. type Number of stations 02 2 stations 10 Common SUP Individual pressure 10 stations Port size (Individual port) All common ports are /8 Common SUP model has the indication of P and individual SUP has the indication of VAC. at the common port. Arrangement of solenoid valves Common port Individual port Plug The standard arrangement of manifolds should be placed on an individual port on this side, each solenoid valve from the left side and a blank plate in the right side. The right side of the common port provides plug. VC VDW VQ VX2 VX VX VXA VN LVC LVA LVH LVD LVQ LQ LVN TI/ TIL PA PAX PB 17--

4 Series VVXA21/22 The VX series will be revised shortly. Dimensions/ Common SUP type IN port OUT port (Pitch) (Pitch) Individual SUP type OUT port IN port Pitch Pitch L Dimension VVXA21 VVXA22 Stations Symbol L1 L2 L1 L VVXA21 VVXA22 A 8 B 20.5 [17.5] 26.5 [22.5] C D 11 1 E 25 0 F 2 0 G 6 6 H J 7 K M 5 58 N 5 [ ]: Individual pressure type

5 The VX series will be revised shortly. 5 Direct Operated Port Valve/ For, Gas, Vacuum and Oil Series VVXA1/2 Series VVXA2 Series VVXA1 Variations Valve Common (C.O.) Port R Energized open Energized closed A wide variety of applicable fluids. Combination of seal materials (NBR, FKM, or EPDM) can be selected freely, depending on the purpose. Able to replace valves with the piping remained unchanged. N.C./N.O. switchover is easy. Weight-saving aluminum base and body. (Not applicable to water or steam.) Material Base, Body Seal material Aluminum NBR, FKM, EPDM VC VDW VQ VX2 VX VX VXA VN LVC LVA LVH LVD LVQ LQ LVN TI/ TIL PA PAX PB stations B mount 2 to 10 stations base model VVXA11-stations VVXA12-stations VVXA21-stations VVXA22-stations 1 1 Port R

6 Series VVXA1/2 The VX series will be revised shortly. 6 Common (C.O.) JIS Symbol Fluid Standard specifications (Standard, Dry) Vacuum (up to 1. x 10 2 Pa) Turbine oil Carbon dioxide (CO2), Nitrogen gas (N2) Option Note) Vacuum (up to 1. x 10 1 Pa) (V) Non-leak (10 6 Pa m /s or less) (V) Other Note) Refer to page Applicable Fluids Check List for details of special fluids outside of the standard options and specifications. Port R Normally closed Normally open Specifications type Number of valves (with gasket, screws) B Mount Common supply, Common exhaust, Individual out 2 to 10 stations VVXA1 VX VVXA2 VX Construction/ Principal Parts Material No. Description q body, Base Port R Material Standard Option Brass Aluminum (Base is made of aluminum.) w Valve NBR, assembly Polyacetal FKM/EPDM e Adapter Aluminum FKM/EPDM r Travel NBR, assembly Polyacetal FKM/EPDM t O-ring NBR FKM/EPDM y Pilot cover Aluminum u Piston spring Stainless steel i Piston NBR, Polyacetal o Gasket NBR FKM/EPDM Base And Applicable Valve Part No. base Individual port Applicable valve Base weight (g) VVXA11-stations 1/8 VVXA12-stations 1/ VXA n x VVXA21-stations 1/8 VVXA22-stations 1/ VXA n x /Valve Specifications Orifice size (mmø) 1.5 VXA VXA VXA VXA15-00 VXA25-00 VXA25-00 Note) Add the V type (VXA1) 80 g, (VXA2) 10 g Refer to Glossary on page for details of max. operating pressure differential and max. system pressure. Operating Fluid and Ambient Temperature Temperature conditions Maximum Minimum Tightness of Valve (Leak rate) Pilot Pressure Operating fluid temperature ( C) Oil Vacuum (Standard) (Standard) (V) (1) 5 (2) Note 1) Dew point: 5 C or less Note 2) 500 cst or less Note ) V in parentheses is option symbol. VXA1 5 VXA2 5 Max. operating pressure differential (MPa) Oil Av x 10-6 (m 2 ) Cv converted C [dm /(s bar)] b Cv Pressure (MPa) 0.25 to 0.7 Flow characteristics () Max system pressure (MPa) Ambient temperature ( C) Proof Weight pressure (MPa) (g) Fluid Seal material NBR, FKM, EPDM 1 cm /min or less Liquid 0.1 cm /min or less(1) Non-leak, Vacuum 10 6 Pa m /s or less Note 1) Differs depending on the operating conditions such as pressure, etc. Note 2) Value on option V (Non-leak, Vacuum) (2)

7 Orifice size mmø mmø mmø mmø VXA1 VXA2 Refer to the table (1) given below for availability. Table (1) Orifice Size VXA1 VXA2 Direct Operated Port Valve/ For, Gas, Vacuum and Oil Orifice size (No) 1 2 (1.5 mmø) (2.2 mmø) ( mmø) ( mmø) 5 Nil V How to Order 00 Valve option Valve/Body 5 Common/For manifold Connection 00 No connection screw/for manifold Standard specifications For vacuum, non-leak Select an option mark in page by Applicable Fluids Check List for special fluids outside of the standard. How to Order Base base Symbol Applicable valve VVXA1 VXA VVXA2 VXA VVXA1 VVXA2 How to Order Write both the base part number and the solenoid valve to be mounted or blanking plate part number. (Example) 7 stations of VXA1, Individual port (Base P/N) VXA pc (Valve P/N) VXA pcs ( P/N) VX pc Series VVXA1/2 The VX series will be revised shortly. Number of stations 02 2 stations stations Port size (Individual port) All common ports are 1/. The common SUP is indicated as P on the common port and the individual SUP is indicated as R. Arrangement of solenoid valves Common port Individual port Plug The standard arrangement of manifolds should be placed on an individual port on this side, each solenoid valve from the left side and a blank plate in the right side. The right side of the common port provides plug. VC VDW VQ VX2 VX VX VXA VN LVC LVA LVH LVD LVQ LQ LVN TI/ TIL PA PAX PB

8 Series VVXA1/2 The VX series will be revised shortly. 8 Dimensions 1 8 Mounting hole Indication of valve type Type indication (Gasket) Mounting hole 1 n- 8, 1 (Pitch) (Pitch) VVXA1 VVXA2 Symbol Stations L1 L2 L1 L VVXA1 VVXA2 Symbol A 0 B C 10 D 22 2 E 5 66 F G 2 25 H 0 0 J 6 6 K 6 M N