ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800
|
|
- Logan Maxwell
- 5 years ago
- Views:
Transcription
1 ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800
2 MACHINE DIMENSIONS 570 E ) ) 625 min. 210 max ) ) Electrical connection Cooling water connection R390 1) Injection unit 400 2) Injection unit 800 2
3 TECHNICAL DATA 570 E Clamping unit with clamping force max. kn 570 E 2000 Opening force stroke max. kn mm Mould height, fixed variable min.-max. mm Platen daylight fixed variable max. mm Distance between tie bars (w x h) mm 570 x 570 Mould mounting platens (w x h) max. mm 795 x 795 Weight of movable mould half max. kg 1300 Ejector force stroke max. kn mm Dry cycle time EUROMAP ² min. s - mm 1,8-399 Injection unit with screw diameter mm Effective screw length L/D Screw stroke max. mm Calculated stroke volume max. cm³ Shot weight max. g PS Material throughput max. kg/h PS max. kg/h PA6.6 12, , Injection pressure max. bar Holding pressure max. bar Injection flow ² Standard max. cm³/s Version max. cm³/s Screw circumferential speed ² max. m/min Screw torque max. Nm Nozzle contact force retraction stroke max. kn mm Heating capacity zones kw 9,4 5 19,9 8 Feed hopper l Drive and connection with injection unit Net weight of machine kg Sound press. level Insecurity ⁴ db(a) 61 3 Electrical connection ³ kw Total A Machine A --- Heating A --- Cooling water connection max. C min. Δp bar 30 1,5 DN 25 Machine type with EUROMAP size designation ¹ 570 E Upon request: other machine types and mould installation heights, screws, drive powers etc. All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive. 1) Clamping force (kn) - size of injection unit = max. stroke volume (cm³) x max. injection pressure (kbar). 2) Specifications depend on the drive variant / drive configuration. 3) Specifications relate to 400 V/50 Hz. 4) Detailed info in the operating instr. [ ] Specifications apply to alternative equipment. 3
4 MOULD INSTALLATION DIMENSIONS 570 E Stroke max E X Ø125H7 Y B A Stroke max. 450 max min max. 550 max. 50 1)2) Ejector bolt X Bore in mould (if required) Y 43,5 Ø Ø37 Ø45 Ø82 Ø64 Ø43 40 Ø110 1) Ø125 2) Ø65 1) Ø70 2) ) 2) Thermoset version Closing force for spring moulds* Robotic system mounting E Closing force [kn] M8-16 deep 97.5 Mould stroke [mm] * automatic clamping force control requirement 1) Injection unit 400 2) Injection unit M20-39 deep 4
5 MOULD INSTALLATION DIMENSIONS 570 E Fixed mould mounting platen A Ø125H7 M16-31 deep Holes for ARBURG mechanical mould rapid clamping system Moving mould mounting platen B M8-16 deep for robotic system Ø
6 SHOT WEIGHTS 570 E Theoretical shot weights for the most important injection moulding materials Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS 1) Cellulose acetate max. g CA 1) Celluloseacetobutyrate max. g CAB 1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 PA 6 1) max. g PA 6.10 PA 11 1) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE 1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P 1) ) average value ARBURG GmbH + Co KG Arthur-Hehl-Strasse Lossburg Tel.: contact@arburg.com _EN_GB_ Subject to alterations 2018 ARBURG GmbH + Co KG All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400
ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.
More informationALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800
ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800
More informationALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430
More informationALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 820 A Distance between tie bars: 820 x 820 mm Clamping force: 3, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 820 A 875 567 707 1100 178 433 482 2355 625 2800 3) 7476
More informationALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70
ALLROUNDER 1 S Distance between tie bars: 1 x 1 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, MACHINE DIMENSIONS 1 S 120 1130 850 min. max. 385 330 255 455 3) 1850 1880 385
More informationALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600
ALLROUNDER 920 S Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 MACHINE DIMENSIONS 920 S 2425 4) 2530 5) 1670 4) 1697 5) 848 4) 878 5)
More informationALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
More informationALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
More informationALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
More informationALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
More informationALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
More informationALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
More informationALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.
Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191
More informationALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
ALLROUNDER 520 E Distance between tie bars: 20.47 x 20.47 (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz MACHINE DIMENSIONS 520 E 78.74 53.15 33.46 4.72 12.99 15.75 51.18
More informationALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.
ALLROUNDER 470 E Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.2 oz MACHINE DIMENSIONS 470 E 51.24 33.44 max.16.34 4.72 80.71 83.62 15.75
More informationALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800
Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330
More informationALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400
Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330
More informationALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
More information820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
More informationALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877
More informationALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
More informationALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.
ALLROUNDER 570 A Distance between tie bars: 22.44 x 22.44 (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.8 oz MACHINE DIMENSIONS 570 A 78.82 55.43 33.46 330 17.24 88.39 1)
More informationALLROUNDER 720 A Multi-component
Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component
More informationALLROUNDER 820 S Multi-component
Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component
More informationALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
More informationALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
More informationALLROUNDER CUBE 2900
Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions
More informationALLROUNDER 720 S Multi-component
Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component
More informationFacts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850
More informationALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz
ALLROUNDER 275 V Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz MACHINE DIMENSIONS 275 V 35.43 2.18 70.1 113.39 1) 119.1 2) 111.81 1) 115.95 2).57 75.1 31.5 35.43 min.35.43
More informationFacts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.
Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)
More informationALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100
LLROUNDER 1 T Table diameter: 1 mm Clamping force: 2000, 2500, 3200 kn (acc. to EUROMP): 400,, 1300, 2100 MCHINE DIMENSIONS UP TO 2000 KN 1 T NCG 1150 997 4165 1) 4145 1) 2457 2110 4625 2) 4525 2) 1600
More informationALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44
More informationALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
More informationALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
More informationALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
More informationFacts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
More informationA S GOLDEN EDITION V T C ALLROUNDER 270/320 C. Technical Data
A S GOLDEN EDITION V T C ALLROUNDER 270/320 C Technical Data Tie bar distances: 270 x 270 mm, 320 x 320 mm Clamping forces: 0, 400, 0, 600 kn Injection units (according to EUROMAP):, 2 www.arburg.com 270/320
More informationALLROUNDER 270 S Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70, 100, 170
A S GOLDEN EDITION V T ALLROUNDER Technical data Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70,, 170 www.arburg.com Machine dimensions 1850
More informationALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800.
A S GOLDEN EDITION V T K ALLROUNDER Technical data Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP):, 800 www.arburg.com Machine dimensions el. connection
More informationALLROUNDER 470 A multi-component
A S GOLDEN EDITION V T K ALLROUNDER 470 A multi-component Technical data Tie bar distances: 470 x 470 mm Clamping forces: 800, 1000 kn Injection units (according to EUROMAP): 70,, 400 www.arburg.com 470
More informationALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800
Fcts nd figures ALLROUNDER 12 T Tble dimeter: 12 mm Clmping force: 8, 1, 16, 2 kn (cc. to EUROMAP): 7, 1, 17, 29, 4, 8 www.rburg.com 12 T Mchine dimensions up to 1 kn 385 1) 323 2) 3545 3) 366 4) 391 5)
More informationFacts and figures INTEGRALPICKER V.
Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical
More informationFacts and figures MULTILIFT V 6
Facts and figures MULTILIFT V 6 www.arburg.com MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1)
More informationFacts and figures MULTILIFT SELECT 6
Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L
More informationTechnical Data Injection Moulding Machines Series CX PET Light
130 CX PET Light Technical Data Injection Moulding Machines Series CX PET Light CX KM 130-750 CX (PET) 4-fold Injection Moulding machine metric units KM130CX Clamp unit Clamping force kn 1300 Mould opening
More informationTechnical Data Concept and System 25/280
Technical Data Concept and System 25/ Demag Plastics Group Concept and System 25/ Model description 25/-35 25/-80 25/-120 International size description 250-35 250-80 250-120 Clamping unit 25/ Clamping
More information2. The quantifiable attributes
. Introduction Buying a plastic injection moulding machine (PIMM) is not a small investment. Too much machine for the job at hand is wasteful; too little machine does not get the job done. Careful matching
More informationMacroPower MC t The flexible large-molding machine. world of innovation
400 2000 t The flexible large-molding machine world of innovation MacroPower MULTI-COMPONENT SERIES Extra functionality and more freedom for design COMBIMOULD is the multi-component technology from WITTMANN
More information45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply
330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz 8 11 13 gm 226 312 368 Theoretical Disp in^3 15.3 19.4 24.0 cm^3 251 318 393
More informationFocus. Electric ALLROUNDERs. Injection moulding machines for complex part production.
Focus Electric ALLROUNDERs Injection moulding machines for complex part production www.arburg.com At a glance [s] 1 2,5 2,0 1,5 1,0 0,5 ALLDRIVE EDRIVE / GOLDEN ELECTRIC Hydraulic 370 470 520 2 [mm] 120
More informationSpritzgiessautomaten. Innovative into the future. Data and Equipment
Spritzgiessautomaten Innovative into the future Data and Equipment Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY
More informationHydraulic ALLROUNDERs
Focus Hydraulic ALLROUNDERs Injection moulding machines for diverse applications www.arburg.com At a glance 1 2 2,5 Single-circuit pump technology Dual-circuit pump technology Hydraulic accumulator technology
More information72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply
935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More informationWÜRTH Industrie Service WÜPLAST. Screws for thermoplastics
WÜRTH Industrie Service WÜPLAST Screws for thermoplastics W-KLT - SICHER, FLEXIBEL Table of contents: page Introduction 2 WÜPLAST 3 Thread geometry 4 Design and installation information 5-6 WÜPLAST product
More informationElectric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply
750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More informationWÜRTH Industrie Service DE EN WÜPLAST. Screws for thermoplastics
WÜRTH Industrie Service DE EN WÜPLAST Screws for thermoplastics W-KLT - SICHER, FLEXIBEL Table of contents Page Introduction 2 WÜPLAST 3 Thread geometry 4 Design and installation information 5-6 WÜPLAST
More information30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements
440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2
More informationTechnical Specifications
All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure
More informationSpecifications / International kN
ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail: contact@zhafir.com www.zhafir.com Zhafir Zeres Series NINGBO ZHAFIR PLASTICS
More informationMaquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons.
Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Mechanical feature Clamping: Minimizing mold strain by flexible fixed platen and highly rigid clamping structure with ultra capability of self lock.
More informationHaitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN
More informationDelivery program Semi-finished plastics
Delivery program Semi-finished plastics Centroplast Engineering Plastics GmbH Engineering plastics belong to most important industrial materials. They convince above all by their level of performance and
More informationIntElect highly precise. Technical description
IntElect highly precise Technical description Technical Data IntElect 0/3 Sumitomo (SHI) Demag IntElect 0/3 Model description IntElect 0/3 IntElect 0/380 00 0080 International size description Clamping
More informationB-250PD B-300PD B-500PD B-700PD B-800PD B-900PD
ITEM : 71100 ISSUED: APRIL 19, 1993 REVISED: APRIL 26, 2001 HOSHIZAKI STORAGE BIN MODEL B-250PD B-300PD B-500PD B-700PD B-800PD B-900PD PARTS LIST B-250PD G-0 May, 1997 H-0 Dec., 1997 J-0 March, 1999 K-0
More informationZhafir Venus Series. Specifications / International. Zhafir Venus. Series kN
Zhafir Venus Series Zhafir Venus Series Specifications / International 4-8000kN ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail:
More informationSub title. PR series (Toggle type) Servo Hybrid system
Sub title PR series (Toggle type) Servo Hybrid system PR Series Feature Improved reproducibility and handling by excellent position sensor of mold close/open Outstanding injection molding for thin and
More informatione-mac Electric. Efficient. Compact & precise.
e-mac Electric. Efficient. Compact & precise. All-electric. Best-in-class efficiency and precision to the max. All of the ENGEL e-mac s movements are performed by servo-electric drives. The all-electric
More informationZhafir VenusⅡ/p Series
Zhafir VenusⅡ/p Series Zhafir Venus Series Packaging / International 10-3800kN ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 963 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412-1 E-Mail:
More informationElectric. Efficient. Compact & precise. ENGEL e-mac
Electric. Efficient. Compact & precise. be the first. All-electric. Best-in-class efficiency and precision to the max. All of the s movements are performed by servo-electric drives. The all-electric drive
More informationToggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving
TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB Hydraulic TH Hydraulic TN Hydraulic & All electric TE All electric VH Vertical hydraulic
More informationThe ROBUST Performer
80 to 910 Ton The ROBUST Performer Energy Efficient Generous Specifications Robust & Reliable User Friendly Control The ROBUST Performer 3 Large Ram Diameter Provides Uniform Force Distribution across
More informationENGEL e-motion TL. All-electric, tie-bar-less. be the first.
ENGEL e-motion TL All-electric, tie-bar-less be the first. ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect
More informationHoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Serenity Series Model A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71266 Issued: 2-20-2007 Revised: 3-1-2007 CONTENTS Auxiliary Codes...
More information80 ~ 350 Tons LGH-D Series
0 ~ 0 Tons LGH-D Series Featuring another technical innovation by LS The LGH-D Series, designed with LS s high technology, meets the demand for precision molding. Improved rigidity of the platen provides
More informationHaitian MarsⅡSeries. Specifications / International KN. Haitian Mars. Series
Haitian MarsⅡSeries HITIN INTERNTIONL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HITIN HUYUN MCHINERY CO., LTD.
More informationLot no. Description. Page 1 of 6
Injection Moulding (Ends: 2016-07-19 14:00:00.0) An online auction of Various Plastic Injection Moulding Machines and an Ultrasonic Plastic Welder from different locations. Buyers Premium 15% VAT 20% Location
More informationKM-1600MRH KM-1600MRH3
NO. 71188 ISSUED: JULY 25, 2001 REVISED: APR. 22, 1999 HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-1600MRH KM-1600MRH3 S LIST KM-1600MRH July 2001 KM-1600MRH3 July 2001 2 MATERIAL ABBREVIATIONS ALUMINUM
More informationThe multi-function machine
The multi-function machine Technical Description Multi Clamping unit asic hydraulic 500 kn 800 kn 1100 kn 18,5 kw 22 kw 30 kw Injection unit/ Distance Screw between tie bars V V V 370 x 370 120 200 22/25/30
More informationReliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH PARTS LIST
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH S LIST ITEM #: 71221 ISSUED: MAY 29, 2003 REVISED: JUNE 30, 2003 KMD-700MAH MAY, 2003 KMD-700MWH MAY, 2003 KMD-700MRH
More informationHOSHIZAKI ICE DISPENSING BIN MODEL DB-200C (FINAL) PARTS LIST
NO: 71012 ISSUED: SEPT. 6, 1989 REVISED: FEB. 25, 2002 HOSHIZAKI ICE DISPENSING BIN MODEL DB-200C (FINAL) PARTS LIST J-1 JULY 1989 J-2 OCTOBER 1989 K-1 DECEMBER 1989 K-2 SEPTEMBER 1990 A-0 MARCH 1991 A-1
More informationHot Runner Guide Layout and Design
H O T R U N N E R Layout and Design Stabilize your Process CAT-14-0001_EN-Rev05 EN 11/2017 T E C H N O L O G Y Layout and Design The purpose of this The - Layout and Design is intended to help everyone
More informationHoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Models KM-501MAH KM-501MWH KM-501MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71254 Issued: 5-26-2006 CONTENTS Auxiliary Codes...
More informationKN-150G-RA/LA KN-180G-RA/LA KN-210G-RA/LA
NO. 74AR-1890 ISSUED: JAN. 24, 1997 FINAL: AUG. 10, 2000 HOSHIZAKI COUNTER SHOWCASE KN-150G-RA/LA PARTS LIST (HA) G-0 DEC. 1996 H-0 DEC. 1997 FINAL MATERIAL ABBREVIATIONS PLASTIC ABS = Acrylonitrile-butadien-styrene
More informationOUR HEADQUARTERS. The only name that matters for injection and compression moulding machines. UK Slovakia Taiwan RUBBER INJECTION MACHINE SERIES
RUBBER INJECTION MACHINE SERIES OUR HEADQUARTERS UK Slovakia Taiwan The only name that matters for injection and compression moulding machines www.panstone.eu www.panstone.eu Tel: +44 (0) 978 476 Email:
More informationHoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Serenity Series Model A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 7179 Issued: 4-3-008 CONTENTS Auxiliary Codes... 3 Note About
More informationReliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH PARTS LIST
Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH S LIST ITEM #: 71222 ISSUED: JUNE 2, 2003 REVISED: OCT. 21, 2003 KMD-900MAH N-0 MAY, 2003 N-1 SEPT., 2003 KMD-900MWH
More informationUNIT SPRINT 100 SPRINT 150 SPRINT 180
UNIT SPRINT 100 SPRINT 150 SPRINT 180 SPRINT 250 SPRINT 350 545 705 1480 2275 Screw Diameter mm 28 32 36 40 45 50 45 50 60 56 60 70 70 80 90 Injection Pressure bar 2344 1795 1420 2430 1920 1555 2160 1750
More informationHOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAH KM-500MWH KM-500MRH PARTS LIST
NO. 71185 ISSUED: JULY 17, 2001 REVISED: JAN. 24, 2003 HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAH KM-500MWH KM-500MRH PARTS LIST KM-500MAH KM-500MWH L-0 April 2001 M-0 Dec. 2001 M-1 March 2002 M-2
More informationHoshizaki America, Inc.
Hoshizaki America, Inc. Self-Contained Cubelet Models C-100BAE-AD C-100BAE-ADDS A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71278 Issued: 3-25-2008 Revised: 6-14-2012 CONTENTS
More informationROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES
ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES ROMI Industrial Complex in Santa Bárbara d Oeste - SP, Brazil INNOVATION + QUALITY Romi: Since 1930 producing high technology.
More informationHot Sprue Bushings Products/Technical Guide
Hot Sprue Bushings Products/Technical Guide USB8 And SB8 Hot Sprue Bushings Notes 1. Cold bushing length must allow for thermal expansion to fit specified mold length. 2. For special "A" length order next
More informationKM-1300MAH KM-1300MWH KM-1300MRH
71187 ISSUED: JUNE 24, 2001 REVISED: JULY 29, 2003 TM HOSHIZAKI MODULAR CRESCENT CUBER KM-1300MAH KM-1300MWH KM-1300MRH S LIST KM-1300MAH April 2001 KM-1300MWH June 2001 KM-1300MRH April 2001 2 MATERIAL
More informationTempGuard TM RH3-SSB-GD
Reliability is a beautiful thing TM REACH-INS TempGuard TM Model RH3-SSB-GD PARTS LIST ITEM #: 71180 ISSUED: MARCH 8, 1999 REVISED: OCT. 16, 2003 RH3-SSB-GD K-0 SEPT., 2000 N-6 MAY, 2003 2 ALUMINUM AL
More informationHaitian Jupiter JU/j Series
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD. Export Processing
More informationHoshizaki America, Inc.
Hoshizaki America, Inc. Modular Crescent Cuber Model A Superior Degree of Reliability PARTS LIST www.hoshizaki.com 89/336 73/23 Number: 71289 Issued: 9-22-2008 CONTENTS Auxiliary Codes... 3 Note About
More informationPLASTICS INJECTION MOLDING MACHINE
PLASTICS INJECTION MOLDING MACHINE MODEL VT - 60 VT - 80 VT - VT - 140 VT - 200 UNIT A B C A B C A B C A B C Screw Diameter 30 30 27 35 35 32 45 45 40 50 50 45 55 Screw L / D Ratio 18:01 18:01 20:01 18:01
More informationPromix Solutions trust the leader. Static Mixers Solutions for Injection Molding
Promix Solutions trust the leader Static Mixers Solutions for Injection Molding Your partner in the plastics processing industry Founded in 2012 as a spin-off of Sulzer Chemtech Subsidiaries in Winterthur,
More informationVertical Type Injection Molding Machine. series. Insert Molding. Automation Optimization. Minimize the spaced required for installation
VH Vertical Type Injection Molding Machine series Insert Molding Automation Optimization Minimize the spaced required for installation Machine series TB series 90-880 TH-S(D&B) series 50-450 TH-PET(D&B)
More informationTempGuard Model RFH1-SSB-HD
Reliability is a beautiful thing TM REACH-IN TempGuard Model PARTS LIST ITEM #: 78 ISSUED: Ocber 3, 003 REVISED: July 8, 005 CONTENTS Auxiliary Code... 3 Note About Ordering Parts... 3 Material Abbreviations...
More information