ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600

Size: px
Start display at page:

Download "ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600"

Transcription

1 ALLROUNDER 920 S Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600

2 MACHINE DIMENSIONS 920 S ) ) ) ) 848 4) 878 5) max ) max ) 112 4) 539 5) ) 179 5) ) )4) )4) )2)5) ) )5) )4) )5) )4) ) )5) )5) ) ) ) ) Electrical connection Cooling water connection 1) Injection unit ) Injection unit ) Injection unit pumps 4) Machine model with 1 pump or 2 pumps 5) Machine model with hydraulic accumulator 6) Subject to performance variant and injection unit size 2

3 TECHNICAL DATA 920 S Clamping unit with clamping force max. kn 920 S 5000 Opening force stroke max. kn mm Mould height, fixed variable min. mm Platen daylight fixed variable max. mm Distance between tie bars (w x h) mm 920 x 920 Mould mounting platens (w x h) max. mm 1 x 1 Weight of movable mould half max. kg 8000 Ejector force stroke max. kn mm Dry cycle time EUROMAP ² 1 pump min. s - mm 6, pumps min. s - mm 4,5-644 Accum. min. s - mm 3,2-644 Injection unit with screw diameter mm Effective screw length L/D , , Screw stroke max. mm Calculated stroke volume max. cm³ Shot weight max. g PS Material throughput max. kg/h PS max. kg/h PA Injection pressure max. bar Holding pressure max. bar Injection flow ² 1 pump max. cm³/s pumps max. cm³/s Accum. max. cm³/s Screw circumferential 1 pump max. m/min speed ² 2 pumps max. m/min Accum. max. m/min Screw torque max. Nm Nozzle contact force retraction stroke max. kn mm Heating capacity zones kw 31,4 8 38,4 8 50,9 9 Drive and connection with injection unit pump (servo) pumps Accum Net weight of machine kg Sound press. level Insecurity ⁴ db(a) < < 70 Oil filling l Drive power ² max. kw Electrical connection ³ kw Total A Machine A Heating A Cooling water connection max. C min. Δp bar 30 1,5 DN ,5 G 2" 30 1,5 G 2" Machine type with EUROMAP size designation ¹ Drive 920 S Accum. 920 S Accum. 920 S Accum. Upon request: other machine types and mould installation heights, screws, drive powers etc. All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive. 1) Clamping force (kn) - size of injection unit = max. stroke volume (cm³) x max. injection pressure (kbar) 2) Specifications depend on the drive variant / drive configuration. 3) Specifications relate to 400 V/50 Hz. 4) Emission sound pressure level at the workplace. Detailed information in the operating instructions. [ ] Specifications apply to alternative equipment. 3

4 MOULD INSTALLATION DIMENSIONS 920 S ) ) Stroke max Ø200 H7 C Y 690 min. a Mould installation height X 1 pump 2 pumps Fixed 700 (500) (500) Variable ( ) D B A max. 60 Value in brackets: option Stroke max. 900 a Ø45-0,1 Ø37 Ejector bolt X 43,5 Bore in mould (if required) Y Ø45 Ø82 Ø64 Ø , in thermoset version available on request 70 Ejector plate D Robotic system mounting C W 152,4 101,6 690 M16 711,2 2) 600 2) 406,4 1) ) Positions of ejector plate

5 MOULD INSTALLATION DIMENSIONS 920 S Fixed mould mounting platen A W Ø36 Ø54 W Ø31 Ø Ø200H Moving mould mounting platen B Robotic system mounting W ) 893 1) ) ) 1) Machine model with 1 pump or 2 pumps 2) Machine model with hydraulic accumulator 5

6 SHOT WEIGHTS 920 S Theoretical shot weights for the most important injection moulding materials Injection units according to EUROMAP Screw diameter mm Polystyrene max. g PS Styrene heteropolymerizates max. g SB max. g SAN, ABS 1) Cellulose acetate max. g CA 1) Celluloseacetobutyrate max. g CAB 1) Polymethyl methacrylate max. g PMMA Polyphenylene ether, mod. max. g PPE Polycarbonate max. g PC Polysulphone max. g PSU Polyamides max. g PA 6.6 PA 6 1) max. g PA 6.10 PA 11 1) Polyoximethylene (Polyacetal) max. g POM Polyethylene terephthalate max. g PET Polyethylene max. g PE-LD max. g PE-HD Polypropylene max. g PP Fluorpolymerides max. g FEP, PFA, PCTFE 1) max. g ETFE Polyvinyl chloride max. g PVC-U max. g PVC-P 1) ) average value ARBURG GmbH + Co KG Arthur-Hehl-Strasse Lossburg Tel.: contact@arburg.com _EN_GB_ Subject to alterations 2018 ARBURG GmbH + Co KG All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.

ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100

ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430

More information

ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100

ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 ALLROUNDER 820 A Distance between tie bars: 820 x 820 mm Clamping force: 3, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 820 A 875 567 707 1100 178 433 482 2355 625 2800 3) 7476

More information

ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400

ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400 ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.

More information

ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800

ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800

More information

ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800

ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 MACHINE DIMENSIONS 570 E 1900 850 150 330 520 1285 825 435 605 1000 280 5185

More information

ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70

ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70 ALLROUNDER 1 S Distance between tie bars: 1 x 1 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, MACHINE DIMENSIONS 1 S 120 1130 850 min. max. 385 330 255 455 3) 1850 1880 385

More information

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) ) Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342

More information

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207

More information

ALLROUNDER 720 A Multi-component

ALLROUNDER 720 A Multi-component Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component

More information

ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877

More information

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395

More information

ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.

ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100. Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191

More information

ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.

ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300. Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251

More information

ALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.

ALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29. ALLROUNDER 570 A Distance between tie bars: 22.44 x 22.44 (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.8 oz MACHINE DIMENSIONS 570 A 78.82 55.43 33.46 330 17.24 88.39 1)

More information

ALLROUNDER 720 S Multi-component

ALLROUNDER 720 S Multi-component Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component

More information

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200 Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385

More information

ALLROUNDER 520 A multi-component

ALLROUNDER 520 A multi-component Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component

More information

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800. Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885

More information

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290. Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245

More information

ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800

ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800 Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330

More information

ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400

ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400 Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330

More information

ALLROUNDER 820 S Multi-component

ALLROUNDER 820 S Multi-component Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component

More information

ALLROUNDER 570 C GOLDEN EDITION

ALLROUNDER 570 C GOLDEN EDITION Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255

More information

ALLROUNDER 270 C GOLDEN EDITION

ALLROUNDER 270 C GOLDEN EDITION Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33

More information

ALLROUNDER CUBE 2900

ALLROUNDER CUBE 2900 Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions

More information

ALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.

ALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15. ALLROUNDER 520 E Distance between tie bars: 20.47 x 20.47 (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz MACHINE DIMENSIONS 520 E 78.74 53.15 33.46 4.72 12.99 15.75 51.18

More information

ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.

ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8. ALLROUNDER 470 E Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.2 oz MACHINE DIMENSIONS 470 E 51.24 33.44 max.16.34 4.72 80.71 83.62 15.75

More information

ALLROUNDER 470 S Multi-component

ALLROUNDER 470 S Multi-component Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions

More information

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290. Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850

More information

Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.

Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100. Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)

More information

ALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz

ALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz ALLROUNDER 275 V Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz MACHINE DIMENSIONS 275 V 35.43 2.18 70.1 113.39 1) 119.1 2) 111.81 1) 115.95 2).57 75.1 31.5 35.43 min.35.43

More information

ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100

ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100 LLROUNDER 1 T Table diameter: 1 mm Clamping force: 2000, 2500, 3200 kn (acc. to EUROMP): 400,, 1300, 2100 MCHINE DIMENSIONS UP TO 2000 KN 1 T NCG 1150 997 4165 1) 4145 1) 2457 2110 4625 2) 4525 2) 1600

More information

ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.

ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15. Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44

More information

Facts and figures ALLROUNDER 1500 T

Facts and figures ALLROUNDER 1500 T Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22

More information

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29. Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7

More information

ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.

ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3. Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35

More information

ALLROUNDER 320 C GOLDEN EDITION

ALLROUNDER 320 C GOLDEN EDITION Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions

More information

A S GOLDEN EDITION V T C ALLROUNDER 270/320 C. Technical Data

A S GOLDEN EDITION V T C ALLROUNDER 270/320 C. Technical Data A S GOLDEN EDITION V T C ALLROUNDER 270/320 C Technical Data Tie bar distances: 270 x 270 mm, 320 x 320 mm Clamping forces: 0, 400, 0, 600 kn Injection units (according to EUROMAP):, 2 www.arburg.com 270/320

More information

ALLROUNDER 270 S Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70, 100, 170

ALLROUNDER 270 S Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70, 100, 170 A S GOLDEN EDITION V T ALLROUNDER Technical data Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70,, 170 www.arburg.com Machine dimensions 1850

More information

ALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800.

ALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800. A S GOLDEN EDITION V T K ALLROUNDER Technical data Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP):, 800 www.arburg.com Machine dimensions el. connection

More information

ALLROUNDER 470 A multi-component

ALLROUNDER 470 A multi-component A S GOLDEN EDITION V T K ALLROUNDER 470 A multi-component Technical data Tie bar distances: 470 x 470 mm Clamping forces: 800, 1000 kn Injection units (according to EUROMAP): 70,, 400 www.arburg.com 470

More information

ALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800

ALLROUNDER 1200 T. Table diameter: 1200 mm Clamping force: 800, 1000, 1600, 2000 kn Injection unit (acc. to EUROMAP): 70, 100, 170, 290, 400, 800 Fcts nd figures ALLROUNDER 12 T Tble dimeter: 12 mm Clmping force: 8, 1, 16, 2 kn (cc. to EUROMAP): 7, 1, 17, 29, 4, 8 www.rburg.com 12 T Mchine dimensions up to 1 kn 385 1) 323 2) 3545 3) 366 4) 391 5)

More information

Facts and figures INTEGRALPICKER V.

Facts and figures INTEGRALPICKER V. Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical

More information

Facts and figures MULTILIFT V 6

Facts and figures MULTILIFT V 6 Facts and figures MULTILIFT V 6 www.arburg.com MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1)

More information

Facts and figures MULTILIFT SELECT 6

Facts and figures MULTILIFT SELECT 6 Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L

More information

Technical Data Injection Moulding Machines Series CX PET Light

Technical Data Injection Moulding Machines Series CX PET Light 130 CX PET Light Technical Data Injection Moulding Machines Series CX PET Light CX KM 130-750 CX (PET) 4-fold Injection Moulding machine metric units KM130CX Clamp unit Clamping force kn 1300 Mould opening

More information

Technical Data Concept and System 25/280

Technical Data Concept and System 25/280 Technical Data Concept and System 25/ Demag Plastics Group Concept and System 25/ Model description 25/-35 25/-80 25/-120 International size description 250-35 250-80 250-120 Clamping unit 25/ Clamping

More information

MacroPower MC t The flexible large-molding machine. world of innovation

MacroPower MC t The flexible large-molding machine. world of innovation 400 2000 t The flexible large-molding machine world of innovation MacroPower MULTI-COMPONENT SERIES Extra functionality and more freedom for design COMBIMOULD is the multi-component technology from WITTMANN

More information

2. The quantifiable attributes

2. The quantifiable attributes . Introduction Buying a plastic injection moulding machine (PIMM) is not a small investment. Too much machine for the job at hand is wasteful; too little machine does not get the job done. Careful matching

More information

Focus. Electric ALLROUNDERs. Injection moulding machines for complex part production.

Focus. Electric ALLROUNDERs. Injection moulding machines for complex part production. Focus Electric ALLROUNDERs Injection moulding machines for complex part production www.arburg.com At a glance [s] 1 2,5 2,0 1,5 1,0 0,5 ALLDRIVE EDRIVE / GOLDEN ELECTRIC Hydraulic 370 470 520 2 [mm] 120

More information

Hydraulic ALLROUNDERs

Hydraulic ALLROUNDERs Focus Hydraulic ALLROUNDERs Injection moulding machines for diverse applications www.arburg.com At a glance 1 2 2,5 Single-circuit pump technology Dual-circuit pump technology Hydraulic accumulator technology

More information

WÜRTH Industrie Service WÜPLAST. Screws for thermoplastics

WÜRTH Industrie Service WÜPLAST. Screws for thermoplastics WÜRTH Industrie Service WÜPLAST Screws for thermoplastics W-KLT - SICHER, FLEXIBEL Table of contents: page Introduction 2 WÜPLAST 3 Thread geometry 4 Design and installation information 5-6 WÜPLAST product

More information

Spritzgiessautomaten. Innovative into the future. Data and Equipment

Spritzgiessautomaten. Innovative into the future. Data and Equipment Spritzgiessautomaten Innovative into the future Data and Equipment Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY

More information

WÜRTH Industrie Service DE EN WÜPLAST. Screws for thermoplastics

WÜRTH Industrie Service DE EN WÜPLAST. Screws for thermoplastics WÜRTH Industrie Service DE EN WÜPLAST Screws for thermoplastics W-KLT - SICHER, FLEXIBEL Table of contents Page Introduction 2 WÜPLAST 3 Thread geometry 4 Design and installation information 5-6 WÜPLAST

More information

45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply

45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply 330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz 8 11 13 gm 226 312 368 Theoretical Disp in^3 15.3 19.4 24.0 cm^3 251 318 393

More information

30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements

30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements 440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2

More information

72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply

72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply 935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6

More information

Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply

Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply 750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6

More information

Haitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T

Haitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN

More information

e-mac Electric. Efficient. Compact & precise.

e-mac Electric. Efficient. Compact & precise. e-mac Electric. Efficient. Compact & precise. All-electric. Best-in-class efficiency and precision to the max. All of the ENGEL e-mac s movements are performed by servo-electric drives. The all-electric

More information

ENGEL e-motion TL. All-electric, tie-bar-less. be the first.

ENGEL e-motion TL. All-electric, tie-bar-less. be the first. ENGEL e-motion TL All-electric, tie-bar-less be the first. ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect

More information

Electric. Efficient. Compact & precise. ENGEL e-mac

Electric. Efficient. Compact & precise. ENGEL e-mac Electric. Efficient. Compact & precise. be the first. All-electric. Best-in-class efficiency and precision to the max. All of the s movements are performed by servo-electric drives. The all-electric drive

More information

Delivery program Semi-finished plastics

Delivery program Semi-finished plastics Delivery program Semi-finished plastics Centroplast Engineering Plastics GmbH Engineering plastics belong to most important industrial materials. They convince above all by their level of performance and

More information

B-250PD B-300PD B-500PD B-700PD B-800PD B-900PD

B-250PD B-300PD B-500PD B-700PD B-800PD B-900PD ITEM : 71100 ISSUED: APRIL 19, 1993 REVISED: APRIL 26, 2001 HOSHIZAKI STORAGE BIN MODEL B-250PD B-300PD B-500PD B-700PD B-800PD B-900PD PARTS LIST B-250PD G-0 May, 1997 H-0 Dec., 1997 J-0 March, 1999 K-0

More information

Technical Specifications

Technical Specifications All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure

More information

Specifications / International kN

Specifications / International kN ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail: contact@zhafir.com www.zhafir.com Zhafir Zeres Series NINGBO ZHAFIR PLASTICS

More information

IntElect highly precise. Technical description

IntElect highly precise. Technical description IntElect highly precise Technical description Technical Data IntElect 0/3 Sumitomo (SHI) Demag IntElect 0/3 Model description IntElect 0/3 IntElect 0/380 00 0080 International size description Clamping

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Modular Crescent Cuber Serenity Series Model A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71266 Issued: 2-20-2007 Revised: 3-1-2007 CONTENTS Auxiliary Codes...

More information

Haitian MarsⅡSeries. Specifications / International KN. Haitian Mars. Series

Haitian MarsⅡSeries. Specifications / International KN. Haitian Mars. Series Haitian MarsⅡSeries HITIN INTERNTIONL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HITIN HUYUN MCHINERY CO., LTD.

More information

MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines

MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines Mitsubishi Heavy Industries Technical Review Vol. 49 No. 4 (December 2012) 23 MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines Mitsubishi Heavy Industries Plastic Technology

More information

Haitian Jupiter JU/j Series

Haitian Jupiter JU/j Series HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD. Export Processing

More information

e-motion TL All-electric, tie-bar-less

e-motion TL All-electric, tie-bar-less e-motion TL All-electric, tie-bar-less ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect clamping force distribution

More information

Toggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving

Toggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB Hydraulic TH Hydraulic TN Hydraulic & All electric TE All electric VH Vertical hydraulic

More information

KM-1600MRH KM-1600MRH3

KM-1600MRH KM-1600MRH3 NO. 71188 ISSUED: JULY 25, 2001 REVISED: APR. 22, 1999 HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-1600MRH KM-1600MRH3 S LIST KM-1600MRH July 2001 KM-1600MRH3 July 2001 2 MATERIAL ABBREVIATIONS ALUMINUM

More information

The multi-function machine

The multi-function machine The multi-function machine Technical Description Multi Clamping unit asic hydraulic 500 kn 800 kn 1100 kn 18,5 kw 22 kw 30 kw Injection unit/ Distance Screw between tie bars V V V 370 x 370 120 200 22/25/30

More information

Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons.

Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Mechanical feature Clamping: Minimizing mold strain by flexible fixed platen and highly rigid clamping structure with ultra capability of self lock.

More information

Zhafir Venus Series. Specifications / International. Zhafir Venus. Series kN

Zhafir Venus Series. Specifications / International. Zhafir Venus. Series kN Zhafir Venus Series Zhafir Venus Series Specifications / International 4-8000kN ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail:

More information

80 ~ 350 Tons LGH-D Series

80 ~ 350 Tons LGH-D Series 0 ~ 0 Tons LGH-D Series Featuring another technical innovation by LS The LGH-D Series, designed with LS s high technology, meets the demand for precision molding. Improved rigidity of the platen provides

More information

Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH PARTS LIST

Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH PARTS LIST Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-700MAH KMD-700MWH KMD-700MRH S LIST ITEM #: 71221 ISSUED: MAY 29, 2003 REVISED: JUNE 30, 2003 KMD-700MAH MAY, 2003 KMD-700MWH MAY, 2003 KMD-700MRH

More information

HOSHIZAKI ICE DISPENSING BIN MODEL DB-200C (FINAL) PARTS LIST

HOSHIZAKI ICE DISPENSING BIN MODEL DB-200C (FINAL) PARTS LIST NO: 71012 ISSUED: SEPT. 6, 1989 REVISED: FEB. 25, 2002 HOSHIZAKI ICE DISPENSING BIN MODEL DB-200C (FINAL) PARTS LIST J-1 JULY 1989 J-2 OCTOBER 1989 K-1 DECEMBER 1989 K-2 SEPTEMBER 1990 A-0 MARCH 1991 A-1

More information

Sub title. PR series (Toggle type) Servo Hybrid system

Sub title. PR series (Toggle type) Servo Hybrid system Sub title PR series (Toggle type) Servo Hybrid system PR Series Feature Improved reproducibility and handling by excellent position sensor of mold close/open Outstanding injection molding for thin and

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Modular Crescent Cuber Models KM-501MAH KM-501MWH KM-501MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71254 Issued: 5-26-2006 CONTENTS Auxiliary Codes...

More information

KN-150G-RA/LA KN-180G-RA/LA KN-210G-RA/LA

KN-150G-RA/LA KN-180G-RA/LA KN-210G-RA/LA NO. 74AR-1890 ISSUED: JAN. 24, 1997 FINAL: AUG. 10, 2000 HOSHIZAKI COUNTER SHOWCASE KN-150G-RA/LA PARTS LIST (HA) G-0 DEC. 1996 H-0 DEC. 1997 FINAL MATERIAL ABBREVIATIONS PLASTIC ABS = Acrylonitrile-butadien-styrene

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Modular Crescent Cuber Serenity Series Model A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 7179 Issued: 4-3-008 CONTENTS Auxiliary Codes... 3 Note About

More information

Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH PARTS LIST

Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH PARTS LIST Reliability is a beautiful thing TM MODULAR CRESCENT CUBER KMD-900MAH KMD-900MWH KMD-900MRH S LIST ITEM #: 71222 ISSUED: JUNE 2, 2003 REVISED: OCT. 21, 2003 KMD-900MAH N-0 MAY, 2003 N-1 SEPT., 2003 KMD-900MWH

More information

UNIT SPRINT 100 SPRINT 150 SPRINT 180

UNIT SPRINT 100 SPRINT 150 SPRINT 180 UNIT SPRINT 100 SPRINT 150 SPRINT 180 SPRINT 250 SPRINT 350 545 705 1480 2275 Screw Diameter mm 28 32 36 40 45 50 45 50 60 56 60 70 70 80 90 Injection Pressure bar 2344 1795 1420 2430 1920 1555 2160 1750

More information

HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAH KM-500MWH KM-500MRH PARTS LIST

HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAH KM-500MWH KM-500MRH PARTS LIST NO. 71185 ISSUED: JULY 17, 2001 REVISED: JAN. 24, 2003 HOSHIZAKI MODULAR CRESCENT CUBER MODEL KM-500MAH KM-500MWH KM-500MRH PARTS LIST KM-500MAH KM-500MWH L-0 April 2001 M-0 Dec. 2001 M-1 March 2002 M-2

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Self-Contained Cubelet Models C-100BAE-AD C-100BAE-ADDS A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71278 Issued: 3-25-2008 Revised: 6-14-2012 CONTENTS

More information

ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES

ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES ROMI Industrial Complex in Santa Bárbara d Oeste - SP, Brazil INNOVATION + QUALITY Romi: Since 1930 producing high technology.

More information

Zhafir VenusⅡ/p Series

Zhafir VenusⅡ/p Series Zhafir VenusⅡ/p Series Zhafir Venus Series Packaging / International 10-3800kN ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 963 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412-1 E-Mail:

More information

KM-1300MAH KM-1300MWH KM-1300MRH

KM-1300MAH KM-1300MWH KM-1300MRH 71187 ISSUED: JUNE 24, 2001 REVISED: JULY 29, 2003 TM HOSHIZAKI MODULAR CRESCENT CUBER KM-1300MAH KM-1300MWH KM-1300MRH S LIST KM-1300MAH April 2001 KM-1300MWH June 2001 KM-1300MRH April 2001 2 MATERIAL

More information

Highsun. Create with most. professional high-speed plastic solution. Time to go global

Highsun. Create with most. professional high-speed plastic solution. Time to go global Highsun Time to go global Create with most professional high-speed plastic solution LEADING ADVANTAGES 1 2 3 HIGHER-RIGIDITY & STRONGER MECHANICAL STRUCTURE HIGH-SPEED PERFORMANCE ADVANCED DESIGN & HIGHER

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Modular Crescent Cuber Model A Superior Degree of Reliability PARTS LIST www.hoshizaki.com 89/336 73/23 Number: 71289 Issued: 9-22-2008 CONTENTS Auxiliary Codes... 3 Note About

More information

Promix Solutions trust the leader. Static Mixers Solutions for Injection Molding

Promix Solutions trust the leader. Static Mixers Solutions for Injection Molding Promix Solutions trust the leader Static Mixers Solutions for Injection Molding Your partner in the plastics processing industry Founded in 2012 as a spin-off of Sulzer Chemtech Subsidiaries in Winterthur,

More information

Haitian Jupiter JU/j Series Specifications

Haitian Jupiter JU/j Series Specifications Specifications HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD.

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Modular Crescent Cuber Models KM-1340MAH KM-1340MWH KM-1340MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71251 Issued: 5-1-2006 CONTENTS Auxiliary Codes...

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Self-Contained Crescent Cuber Models A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71260 Issued: 12-11-2006 CONTENTS Auxiliary Codes... 3 Note About Ordering

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Modular Crescent Cuber Models KMD-450MAH KMD-450MWH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71275 Issued: 7-2-2009 CONTENTS Auxiliary Codes... 3 Note

More information

Hoshizaki America, Inc.

Hoshizaki America, Inc. Hoshizaki America, Inc. Modular Crescent Cuber Models KMD-700MAH KMD-700MWH KMD-700MRH A Superior Degree of Reliability PARTS LIST www.hoshizaki.com Number: 71221 Issued: 5-29-2003 Revised: 1-9-2008 CONTENTS

More information

Hot Runner Guide Layout and Design

Hot Runner Guide Layout and Design H O T R U N N E R Layout and Design Stabilize your Process CAT-14-0001_EN-Rev05 EN 11/2017 T E C H N O L O G Y Layout and Design The purpose of this The - Layout and Design is intended to help everyone

More information