Facts and figures MULTILIFT V 6

Size: px
Start display at page:

Download "Facts and figures MULTILIFT V 6"

Transcription

1 Facts and figures MULTILIFT V 6

2 MULTILIFT V 6 Technical data F Stroke X-axis 3) Stroke Z-axis 1) Clamping face fixed mould platen E A K 4) Stroke Y axis 2) D 2) 156 B 4) C 2)4) 123 P 1) Conveyor belt available as an option L G 1) Guarding available as an option R 1) N S M 5) Working area 1) Z axis stroke extension available as an option 2) Y axis stroke extension available as an option 3) X axis stroke extension available as an option 4) Crossing height can be increased by 200 as an option 5) Wider conveyor belt possible in conjunction with extension of the Z-axis 2

3 Technical data MULTILIFT V 6 Machine type Dim. A Dim. B 1) Dim. C Dim. D Dim. E Dim. F Dim. G Dim K 1) Conveyor belt 270 A / H S GE GE A / E / H / S GE A / E / H / S GE A / E / H / S A / E / H / S GE max. min. Dim. L Dim. M 2) Machine type Dim. N Dim. P Dim. R Dim. S 270 A / H GE S GE A / E / H / S GE A / E / H / S GE A / E / H / S A / E / H / S GE ) Crossing height can be increased by 200 as an option 2) Wider conveyor belt possible in conjunction with extension of the Z-axis 3

4 MULTILIFT V 6 Technical data Main axes Machine type Handling weight 3) max. kg Z-axis Y-axis X-axis Weight Stroke Speed Stroke Speed Stroke Speed Robot Extended *) verlängert *) Extended *) max. max. /s max. max. /s max. max. /s kg 270 A / H / S / 320 GE A / E / H / S / 470 GE A / E / H / S A / E / H / S A / E / H / S GE Auxiliary axes (gripper axes) C-axis B axis, pneumatic Torque 4) Weight Torque 4) Weight Nm kg Nm kg 14 1,2 10 2,5 B-axis C-axis *) Option 3) Gripper plus part weight plus weight of auxiliary axes (B, C axis) 4) At 6 bar pressure level 4

5 Equipment MULTILIFT V 6 The requirement for use of the cantilever design MULTILIFT V with a load capacity of 6 kg is an ARBURG ALLROUNDER. Axes Main axes with servo-electric drive for rapid, simultaneous movements with a high repeat accuracy C-axis with pneumatic drive for rotating the finished parts j B-axis with pneumatic drive for setting down the finished parts in two different rotational positions Pneumatic valves for grippers Pneumatic valve for actuating gripper functions, such as grippers, gripper jaws, cylinders, lifting and indexing units (see additional information): - 1 with blocked intermediate position (5/3) j Additional pneumatic valves (maximum 6) in any combination of the following versions (see additional information): - with blocked intermediate position (5/3) - with vented intermediate position (5/3) - with spring return movement (2 x 3/2) All pneumatic valves connected to the gripper flange with rapid connect couplings Vacuum equipment for grippers Vacuum unit (venturi effect) for parts handling with suction devices j Additional vacuum equipment (maximum 3) All vacuum equipment connected near the gripper. Including vacuum switches for parts monitoring Air blow function for reliable part transfer Air saving function Pneumatic maintenance unit Manually adjustable filter pressure reducer for adjusting the pressure level j Monitoring of the pressure level Electric on/off function Pressure-charging valve for reliable start-up Distributors for supplying other consumers Control system Sequence prograing with symbols via SELOGICA. Teach-in function for user-friendly sequence prograing Display selection via function and direct access keys Cycle step display in sequence diagram Robot system can be moved in units analogous to the cycle sequence Three different speeds can be selected in manual mode for fast and reliable prograing. Axes can be moved progressively or incrementally (0.1, 1 or 10 ) Prograable sequence branches for reliable separation of random samples, rejects and sprues Data record for robotic system integrated in data record for injection moulding machine j Synchronous movements of robotic system with ejector and mould opening movement Interface between robotic system and injection moulding machine Port for PC keyboard j ARBURG Mobile SELOGICA (AMS) for easy and flexible operation Inputs/outputs for grippers Interface with 8 freely prograable inputs for monitoring sensors for gripper functions. All inputs connected to plugs, including counterplugs j Additional interfaces (maximum 3) for monitoring 8, 16 or 24 further sensors Freely prograable outputs for actuating pneumatic valves for gripper functions. All outputs directly connected to pneumatic valves Inputs/outputs for peripherals Interface (24V DC) with 4 freely prograable inputs and outputs for peripherals. Connected to 42-pin connector on MULTILIFT, including counterplug j Additional interface (24V DC) with 4 freely prograable inputs and outputs. Connected to 42-pin connector on MULTILIFT, including counterplug j Additional interface (24V DC) with 16 or 32 freely prograable inputs and outputs. Connected to 72-pin connector on MULTILIFT, including counterplug Guards j Electrical equipment for protecting one door within the guard fence according to EUROMAP 73, including the following: - 2 emergency stop buttons - 1 acknowledge button - 3 switches for door j Electrical equipment for protecting a second door j Guard in transparent PC for housing the robot system j Corrugated wire mesh guard for housing the robot system Additional options j Conveyor belt for setting down parts, including interface, expandable to include clear button Additional information - Pneumatic valve 5/3 with blocked intermediate position for gripper functions, the position of which should be maintained when not actuated, for example, if the safety guard is open, EMERGENCY STOP - Pneumatic valve 5/3 with vented intermediate position for gripper functions, which should be depressurised when not actuated, in order to ensure part-protecting transfer via the machine-side ejector, for example - Pneumatic valve 2x 3/2 with spring return for gripper functions with spring return movement, for example, with sprue grippers or single-acting pneumatic cylinder Basic machine j Optional 5

6 MULTILIFT V 6 Gripper adaptations Assignment interface X001 gripper inputs S S 5008 Pin no. Function Designation Pin no. Function Designation Detail E: Gripper flange of vertical axis 1 S S Gripper input 1 15 Gripper input S S5006 Gripper input 2 18 Gripper input ± S S S5004 Gripper input 3 21 Gripper input S5008 Centre of axis Gripper input 4 24 Gripper input PE Pneumatic rapid connect couplings Pn1-Pn10 for hose size DA6/DI4 120 Pn5-10 Pn1-4 Pneumatic connection C-axis Interface X001-X002 Gripper inputs S5001-S5016 Interface X011 Gripper inputs Pneum. C-axis 145 Plug connector for vacuum Va1-Va4 for hose size DA6/DI 4 90 Ø 6.6 Ø 5H7 Ø 6.6 E 6

7 Auxiliary axes MULTILIFT V 6 Assignment interface X011 gripper inputs, pneumatic auxiliary axes Pin no. Function Designation Pin no. Function Designation 1 S S A + 11 B S5002 A S 5582 C S 5003 B S 5592 C - B axis (pneumatic) Ø5H7 0 72± ±0.02 Gripper flange, pneumatic B-axis C axis (pneumatic) or 180 Swivel drive, pneumatic B-axis 95 1) Gripper flange, C-axis 90 Ø10 Ø5.3 Ø4 H7 Ø5H7 M6 30± ± Vertical axis ± ± Ø ) Overall height of the system is increased by the height of the B-axis swivel drive Ø

8 MULTILIFT V 6 ARBURG GmbH + Co KG Arthur-Hehl-Strasse Lossburg Tel.: contact@arburg.com With locations in Europe: Germany, Belgium, Denmark, France, United Kingdom, Italy, Netherlands, Austria, Poland, Switzerland, Slovakia, Spain, Czech Republic, Turkey, Hungary Asia: People s Republic of China, Indonesia, Malaysia, Singapore, Taiwan, Thailand, United Arab Emirates America: Brazil, Mexico, USA For more information, please go to ARBURG GmbH + Co KG The brochure is protected by copyright. Any utilisation, which is not expressly permitted under copyright legislation, requires the previous approval of ARBURG. All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine. ARBURG GmbH + Co KG DIN EN ISO certified _EN_GB_ Subject to alterations

Facts and figures MULTILIFT SELECT 6

Facts and figures MULTILIFT SELECT 6 Facts and figures MULTILIFT SELECT 6 www.arburg.com MULTILIFT SELECT 6 Technical data Stroke X-axis min. 100 Stroke Z-axis Clamping face, fixed mould platen 190 A D K Stroke Y axis 156 B 2) C 123 P G L

More information

Facts and figures INTEGRALPICKER V.

Facts and figures INTEGRALPICKER V. Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical

More information

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )

820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) ) Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342

More information

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395

More information

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207

More information

ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.

ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300. Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251

More information

ALLROUNDER 270 C GOLDEN EDITION

ALLROUNDER 270 C GOLDEN EDITION Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33

More information

ALLROUNDER 570 C GOLDEN EDITION

ALLROUNDER 570 C GOLDEN EDITION Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255

More information

ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.

ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100. Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877

More information

ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400

ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400 Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330

More information

ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800

ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800 Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330

More information

ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.

ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100. Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191

More information

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.

ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290. Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245

More information

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.

ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800. Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885

More information

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200

ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200 Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385

More information

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290. Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850

More information

ALLROUNDER 820 S Multi-component

ALLROUNDER 820 S Multi-component Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component

More information

ALLROUNDER 470 S Multi-component

ALLROUNDER 470 S Multi-component Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions

More information

ALLROUNDER 720 S Multi-component

ALLROUNDER 720 S Multi-component Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component

More information

Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.

Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100. Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)

More information

ALLROUNDER 520 A multi-component

ALLROUNDER 520 A multi-component Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component

More information

ALLROUNDER CUBE 2900

ALLROUNDER CUBE 2900 Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions

More information

ALLROUNDER 720 A Multi-component

ALLROUNDER 720 A Multi-component Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component

More information

ALLROUNDER 320 C GOLDEN EDITION

ALLROUNDER 320 C GOLDEN EDITION Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions

More information

ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.

ALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15. Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44

More information

ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.

ALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3. Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35

More information

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.

ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29. Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7

More information

Facts and figures ALLROUNDER 1500 T

Facts and figures ALLROUNDER 1500 T Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22

More information

Hydraulic ALLROUNDERs

Hydraulic ALLROUNDERs Focus Hydraulic ALLROUNDERs Injection moulding machines for diverse applications www.arburg.com At a glance 1 2 2,5 Single-circuit pump technology Dual-circuit pump technology Hydraulic accumulator technology

More information

ALLROUNDER 470 A multi-component

ALLROUNDER 470 A multi-component A S GOLDEN EDITION V T K ALLROUNDER 470 A multi-component Technical data Tie bar distances: 470 x 470 mm Clamping forces: 800, 1000 kn Injection units (according to EUROMAP): 70,, 400 www.arburg.com 470

More information

Focus. Electric ALLROUNDERs. Injection moulding machines for complex part production.

Focus. Electric ALLROUNDERs. Injection moulding machines for complex part production. Focus Electric ALLROUNDERs Injection moulding machines for complex part production www.arburg.com At a glance [s] 1 2,5 2,0 1,5 1,0 0,5 ALLDRIVE EDRIVE / GOLDEN ELECTRIC Hydraulic 370 470 520 2 [mm] 120

More information

ALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800.

ALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800. A S GOLDEN EDITION V T K ALLROUNDER Technical data Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP):, 800 www.arburg.com Machine dimensions el. connection

More information

ALLROUNDER 270 S Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70, 100, 170

ALLROUNDER 270 S Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70, 100, 170 A S GOLDEN EDITION V T ALLROUNDER Technical data Tie bar distance: 270 x 270 mm Clamping forces: 250, 350, 400 kn Injection units (according to EUROMAP): 70,, 170 www.arburg.com Machine dimensions 1850

More information

A S GOLDEN EDITION V T C ALLROUNDER 270/320 C. Technical Data

A S GOLDEN EDITION V T C ALLROUNDER 270/320 C. Technical Data A S GOLDEN EDITION V T C ALLROUNDER 270/320 C Technical Data Tie bar distances: 270 x 270 mm, 320 x 320 mm Clamping forces: 0, 400, 0, 600 kn Injection units (according to EUROMAP):, 2 www.arburg.com 270/320

More information

ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600

ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 ALLROUNDER 920 S Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 MACHINE DIMENSIONS 920 S 2425 4) 2530 5) 1670 4) 1697 5) 848 4) 878 5)

More information

ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800

ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 MACHINE DIMENSIONS 570 E 1900 850 150 330 520 1285 825 435 605 1000 280 5185

More information

ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400

ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400 ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.

More information

ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70

ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70 ALLROUNDER 1 S Distance between tie bars: 1 x 1 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, MACHINE DIMENSIONS 1 S 120 1130 850 min. max. 385 330 255 455 3) 1850 1880 385

More information

ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100

ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430

More information

ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100

ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 ALLROUNDER 820 A Distance between tie bars: 820 x 820 mm Clamping force: 3, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 820 A 875 567 707 1100 178 433 482 2355 625 2800 3) 7476

More information

ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800

ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800

More information

ALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz

ALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz ALLROUNDER 275 V Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz MACHINE DIMENSIONS 275 V 35.43 2.18 70.1 113.39 1) 119.1 2) 111.81 1) 115.95 2).57 75.1 31.5 35.43 min.35.43

More information

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018

WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018 QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and

More information

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)

AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars) Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721

More information

ALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.

ALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29. ALLROUNDER 570 A Distance between tie bars: 22.44 x 22.44 (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.8 oz MACHINE DIMENSIONS 570 A 78.82 55.43 33.46 330 17.24 88.39 1)

More information

BP Statistical Review of World Energy June 2017

BP Statistical Review of World Energy June 2017 BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28

More information

ALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.

ALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15. ALLROUNDER 520 E Distance between tie bars: 20.47 x 20.47 (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz MACHINE DIMENSIONS 520 E 78.74 53.15 33.46 4.72 12.99 15.75 51.18

More information

ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.

ALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8. ALLROUNDER 470 E Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.2 oz MACHINE DIMENSIONS 470 E 51.24 33.44 max.16.34 4.72 80.71 83.62 15.75

More information

Global Dialysis - Cost per Dialysis Session

Global Dialysis - Cost per Dialysis Session Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis

More information

Fork through-beam sensors

Fork through-beam sensors Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity

More information

Lifting Instructions for 1336 PLUS and FORCE D Frame Drives

Lifting Instructions for 1336 PLUS and FORCE D Frame Drives Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS

More information

Fork through-beam sensors

Fork through-beam sensors Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity

More information

Rectangular photoelectric proximity switches

Rectangular photoelectric proximity switches Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating

More information

Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition

Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217

More information

DIAPHRAGM PRESSURE CYLINDERS

DIAPHRAGM PRESSURE CYLINDERS DIAPHRAGM PRESSURE CYLINDERS Diaphragm pressure cylinders EFFBE diaphragm pressure cylinders: sensitive and robust By using EFFBE diaphragm pressure cylinders, sensitive control pro - cesses can be realised

More information

AUTOMATED TORSION BENCH DRIVETWIST

AUTOMATED TORSION BENCH DRIVETWIST Force and torque measurement systems AUTOMATED TORSION BENCH DRIVETWIST ANDILOG Technologies info@andilog.com Phone : +33 (0) 820 888 202 Fax : +33 (0) 820 888 902 Automated torsion bench DRIVETWIST Automated

More information

No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures

No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated

More information

Made UNDER high pressure

Made UNDER high pressure Made UNDER high pressure Made FOR high pressure THE CONTRINEX HIGH-PRESSURE-RESISTANT INDUCTIVE SENSOR SERIES Contrinex is a leading international high-tech sensor company with headquarters in Switzerland.

More information

Test Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy

Test Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized

More information

Accessories for Pressure Gauges

Accessories for Pressure Gauges Accessories for Pressure Gauges measuring monitoring analysing KOBOLD companies worldwide: ALGERIA, ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM, BULGARIA, CANADA, CHILE, CHINA, COLOMBIA, CZECH REPUBLIC, DOM.

More information

Extraction arms for every type of application

Extraction arms for every type of application 1 Extraction arms for every type of application 2 Improved workspaces within arm s reach A workspace free from dust, hazardous particles, fumes and exhaust is good in many ways. It improves the working

More information

Multi Function Efficient Dynamic Altitude Simulation MEDAS

Multi Function Efficient Dynamic Altitude Simulation MEDAS Multi Function Efficient Dynamic Altitude Simulation MEDAS BENEFITS A wide simulation range and extreme flexibility SIMULATE POSITIVE & NEGATIVE PRESSURE One system for positive & negative pressure Steady

More information

Infographics on Electromobility (January 2019)

Infographics on Electromobility (January 2019) Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS

More information

UNIVERSAL TESTING MACHINES STENTOR II CC & ATLAS II CC

UNIVERSAL TESTING MACHINES STENTOR II CC & ATLAS II CC UNIVERSAL TESTING MACHINES STENTOR II CC & ATLAS II CC The product line STENTOR II CC and ATLAS II CC STENTOR II CC The single column testing machine up to 5kN - 3 models: 1kN, 2kN and 5kN - 2 sizes: 200mm

More information

NI PS-15/16/17 Side Mount Brackets

NI PS-15/16/17 Side Mount Brackets INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power

More information

CrimpTest-1 kn. Calibration Bracket

CrimpTest-1 kn. Calibration Bracket CrimpTest-1 kn Calibration Bracket 431-471-02 May 2017 CrimpTest-1 kn Calibration Bracket Manual This manual describes the operation of the calibration test rig part no. 432-671, for the purpose of checking

More information

NCP/NCB/NCS. Magnetic Float Switches. for Liquids

NCP/NCB/NCS. Magnetic Float Switches. for Liquids Magnetic Float Switches for Liquids measuring monitoring analyzing NCP/NCB/NCS Available Materials: Brass, SS, NBR, Polypropylene, and PVC Maximum Pressure: 400 PSIG Maximum Temperature: 300 F Single Point

More information

Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a

Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a 194 Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a Antigua and Barbuda Bahamas China Belgium 0 0-9 122 0.2 1 59 0.1 Bermuda 0 0-17 1 907 2.8 0 0 - Brazil

More information

ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100

ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100 LLROUNDER 1 T Table diameter: 1 mm Clamping force: 2000, 2500, 3200 kn (acc. to EUROMP): 400,, 1300, 2100 MCHINE DIMENSIONS UP TO 2000 KN 1 T NCG 1150 997 4165 1) 4145 1) 2457 2110 4625 2) 4525 2) 1600

More information

Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A

Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A February 28, 2018 Dr. Ed Yardeni 516-972-7683 eyardeni@yardeni.com Joe Abbott 732-497-5306 jabbott@yardeni.com

More information

-Shape the Future with Manufacturing Technology

-Shape the Future with Manufacturing Technology -Shape the Future with Manufacturing Technology GmbH & Co. KG Wilhelm-Harting-Straße 1 D-32339 Espelkamp Tel. 05772/47-97500 Fax 05772/47-537 Internet: www.--.com E-Mail:.applied@.com P. 1 / 18 in Germany

More information

Packing Data Installation Instructions

Packing Data Installation Instructions Packing Data PK Installation Instructions This document describes how to install a Dataliner DL10 display in a panel or enclosure and connect power. European Union Directive Compliance wiring and safety

More information

testing to perfection MultiTest-i Technical Datasheet

testing to perfection MultiTest-i Technical Datasheet testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5 kn 1 kn 2.5 kn Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710 mm (67.3) 290 mm (11.4) 414 mm (16.3) 1359

More information

Potential Danger of Fire or Explosion Read this letter now!

Potential Danger of Fire or Explosion Read this letter now! Elster GmbH Postfach 28 09 49018 Osnabrück Strotheweg 1 49504 Lotte (Büren) Deutschland Tel. +49 541 1214-0 Fax +49 541 1214-370 hts.lotte@honeywell.com ThermalSolutions.honeywell.com Potential Danger

More information

MMA. Insertion Resistance Thermometers. with, or without transmitter. OEconomically-priced O thermometers with optional plug-on display

MMA. Insertion Resistance Thermometers. with, or without transmitter. OEconomically-priced O thermometers with optional plug-on display Insertion Resistance Thermometers with, or without measuring monitoring analysing MMA OEconomically-priced O digital thermometers with optional plug-on display O O Compact construction with or without

More information

Global Valuation Summary - SAMPLE PAGES

Global Valuation Summary - SAMPLE PAGES - SAMPLE PAGES Regional Valuation Comparisons... 2... 4... 7... 9... 11 Developed Asia Pacific ex... 13 Developed Europe ex... 16 Advanced Emerging... 19 Appendix... 22 Disclaimer... 23 Global Market Valuations

More information

testing to perfection MultiTest-i Technical Datasheet

testing to perfection MultiTest-i Technical Datasheet testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5kN 1kN 2.5kN Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710mm (67.3) 290mm (11.4) 414mm (16.3) 1359mm (53.5)

More information

TOP SMART intelligent position monitor:

TOP SMART intelligent position monitor: TOP SMART intelligent position monitor: Air Torque also manufacture the Top smart intrinsically safe compact valve position monitor with integrated diagnostics, self calibrating limit switches, integrated

More information

FEDERAL RESERVE statistical release

FEDERAL RESERVE statistical release FEDERAL RESERVE statistical release FOR IMMEDIATE RELEASE MARCH 16, 1992 E.U C1Z1, GEOGRAPHICAL r DISTRIBUTION n OF e ASSETS AND^LIABILITIES (IN MILLIONS OF DOLLARS) ASSETS COUNTRY OF CUSTOMER 12/31/90

More information

D6.. Butterfly valves. For controlled operation.

D6.. Butterfly valves. For controlled operation. D6.. Butterfly valves. For controlled operation. Water is our element. www.belimo.eu Total solutions for medium and large volumetric flows. Butterfly valves from Belimo are available as classical D6..N

More information

SFC-FID ASTM System. SFC-4000 Series SFC. Performance Innovation Reliability

SFC-FID ASTM System. SFC-4000 Series SFC. Performance Innovation Reliability SFC-FID ASTM System SFC-4000 Series SFC Performance Innovation Reliability The JASCO SFC-FID system has been developed as a simple and validated turn-key solution for the measurement of the two ASTM standard

More information

Product Overview INCH

Product Overview INCH INCH Product Overview CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making gearboxes and variators for light industry applications. Reliable partner in power transmission equipment

More information

SBS-Control. Table of contents. Operating Instructions BKS24-9A. Operating Instructions

SBS-Control. Table of contents. Operating Instructions BKS24-9A. Operating Instructions Operating Instructions BKS24-9A Operating Instructions BKS24-9A Table of contents Operating Instructions 1 Operating controls and indicators 2 2 Preparations for faultless commissioning and operating 3

More information

M O T O R V E H I C L E S T A T I S T l C S

M O T O R V E H I C L E S T A T I S T l C S M O T O R V E H I C L E S T A T I S T l C S of Japan 2017 JAPAN AUTOMOBILE MANUFACTURERS ASSOCIATlON, INC. C O N T E N T S Motor Vehicles in Use Cars, Trucks, Buses and Special Purpose Vehicles, 1945-2016

More information

The radial piston power. COMPANY PROFILE, PRODUCT RANGE & APPLICATIONS CUSTOMIZED SOLUTIONS FOR EVERY REQUIREMENT

The radial piston power.   COMPANY PROFILE, PRODUCT RANGE & APPLICATIONS CUSTOMIZED SOLUTIONS FOR EVERY REQUIREMENT The radial piston power www.italgroup.eu CUSTOMIZED SOLUTIONS FOR EVERY REQUIREMENT COMPANY PROFILE, PRODUCT RANGE & APPLICATIONS Producers and worldwide distributors of radial piston hydraulic motors,

More information

Total credit to the non-financial sector (core debt), % of GDP Table F1.1

Total credit to the non-financial sector (core debt), % of GDP Table F1.1 Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0

More information

67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production

67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed

More information

UNIVERSAL TESTING MACHINERY STENTOR II CC - ATLAS II CC - T-DRIVE CC

UNIVERSAL TESTING MACHINERY STENTOR II CC - ATLAS II CC - T-DRIVE CC UNIVERSAL TESTING MACHINERY STENTOR II CC - ATLAS II CC - T-DRIVE CC The product line STENTOR II CC and ATLAS II CC STENTOR II CC A single column testing machine for up to 5kN / 1,000 lbs - 3 models: 1kN,

More information

DYNAS3 LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING. Explore the future

DYNAS3 LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING. Explore the future LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING DYNAS3 Explore the future Automotive Test Systems Process & Environmental Medical Semiconductor Scientific 2 DYNAS 3 Best-in-class AC dynamometers The HORIBA

More information

Allen-Bradley 1397 Pulse Encoder Interface Card

Allen-Bradley 1397 Pulse Encoder Interface Card Installation Instructions IN Allen-Bradley 1397 Pulse Encoder Interface Card Cat. No. 1397-PE Table of Contents What This Option Provides........................ 1 Where This Option Is Used........................

More information

1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area

1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area 1.0 Area and population area population (1,000) km 2 2000 2010 2018 1 inhabitants per km 2 Belgium 30,530 10,251 10,920 11,443 375 Germany 357,380 82,212 81,777 82,952 232 Estonia 45,230 1,397 1,331 1,315

More information

MULTI FUNCTION EFFICIENT DYNAMIC ALTITUDE SIMULATION MEDAS

MULTI FUNCTION EFFICIENT DYNAMIC ALTITUDE SIMULATION MEDAS MULTI FUNCTION EFFICIENT DYNAMIC ALTITUDE SIMULATION MEDAS 2 ACCURATE DYNAMIC EFFICIENT Altitude simulation for R&D The topic of Real Driving Emissions (RDE) is becoming more and more impor tant. Accurate

More information

NGS. Dual-Magnet Float Switch. Pressure: up to 25 bar. Density: > 0.7 kg/dm 3. High switch capacity. Material: stainless steel 1.

NGS. Dual-Magnet Float Switch. Pressure: up to 25 bar. Density: > 0.7 kg/dm 3. High switch capacity. Material: stainless steel 1. Dual-Magnet Float Switch measuring monitoring analysing NGS Pressure: up to 5 bar O O Medium temperature: up to 50 C Density: > 0.7 kg/dm 3 High switch capacity O O Connection: square flange, DIN flange,

More information

Selection Guide for P Series Pump Accessories & Options

Selection Guide for P Series Pump Accessories & Options Selection Guide for P Series Pump Accessories & Options Contents Page Calibration Cylinders...2 Back Pressure & Pressure Relief Valves...3 Pulsation Dampeners...6 Motors & Controllers...9 Calibration Cylinders

More information

Piston Pumps Series P2 / P3 Variable Displacement

Piston Pumps Series P2 / P3 Variable Displacement Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options

More information

INFINEUM WORLDWIDE WINTER DIESEL FUEL QUALITY SURVEY

INFINEUM WORLDWIDE WINTER DIESEL FUEL QUALITY SURVEY INFINEUM WORLDWIDE WINTER DIESEL FUEL QUALITY SURVEY 22 http://www.infineum.com/ Contents Forward CONTENTS Introduction... 3 The Trends... 4 Worldwide Diesel Fuel Survey Physical Inspection Data Mean values...

More information

Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications

Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications Mineral Industry Drive solutions for reclaimers, stackers, bulk conveyors applications A world specialist in drive systems World leader in the design and production of alternators and motors, Leroy-Somer,

More information

Table 5 Production, trade and supply of hard coal Thousand metric tons and kilograms per capita

Table 5 Production, trade and supply of hard coal Thousand metric tons and kilograms per capita Table Notes Production includes production from other sources as defined in the previous table. Data for China include brown coal. Please refer to the Definitions Section on pages ix to xv for the appropriate

More information

Table 5 Production, trade and supply of hard coal Thousand metric tons and kilograms per capita

Table 5 Production, trade and supply of hard coal Thousand metric tons and kilograms per capita Table Notes Production includes production from other sources as defined in the previous table. Data for China include brown coal. Please refer to the Definitions Section on pages ix to xv for the appropriate

More information

Spare Parts List Series VP04 Pneumatic Remote Control Valve

Spare Parts List Series VP04 Pneumatic Remote Control Valve Pneumatic Remote Control Valve Publication No HY17-8820/UK July 2004 Conversion factors 1 kg = 2.2046 lb 1 N = 0.22481 lbf 1 bar = 14.04 psi 1 l = 0.21997 UK gallon 1 l = 0.26417 US gallon 1 cm = 0.061024

More information