TempGuard TM RH3-SSB-GD

Transcription

1 Reliability is a beautiful thing TM REACH-INS TempGuard TM Model RH3-SSB-GD PARTS LIST ITEM #: ISSUED: MARCH 8, 1999 REVISED: OCT. 16, 2003

2 RH3-SSB-GD K-0 SEPT., 2000 N-6 MAY,

3 ALUMINUM AL = Aluminum MATERIAL ABBREVIATIONS COPPER CU = Copper PLASTIC ABS = Acrylonitritrile -butadiene - styrene AC = Polyacetal EVA = Ethylene vinyl acetate PA = Polyamide = Nylon PC = Polycarbonate PE = Polyethylene PES = Polyester PETP = Polyethylene terephthalate = Tetlon PP = Polypropylene PS = Polystyrene PTFE = Polytetrafluoroethylene = Teflon PUR = Polyurethane PVC = Polyvinyl chloride RUBBER VN = Vinyl Nitrile EPDM = EP rubber NBR = Nitrile butadiene rubber NR = Natural rubber NP = Neoprene SI.R = Silicone rubber SY.R = Synthetic rubber EPH = Epichlorohydrin STEEL G.S = Galvanized steel S.S = Stainless steel P.S = Plated steel PAS = Primed steel Ex.1 H-0 AUXILIARY CODE (Note) - = Part deleted. x = Part deleted and replaced Each year of production is assigned by "o" part (interchangeable). a letter; "H" indicates 1998 ("I" is skipped) "J" indicates 1999, etc. o = New (interchangeable) part for "x" Ex.2 H-1 in the same auxiliary code. Each time a part is changed non-interchangeably in a year, this number advances. 3

4 RH3-SSB-GD A. REACH-IN K-0, N-6 4 4a 5 5a 3 3a 2 2a 2b 2c 2d 1 1a B B1 B2 B3 6 6a a 8b 9 8 8a 8b a 11b 11c E D C C1 F F1 4

5 MODEL: RH3-SSB-GD TITLE: A. REACH-IN INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 B REFRIGERATION ASSEMBLY - 1A0497A B1 BOLT ASSEMBLY 8X B2 HEX BOLT 8X70 7B B3 WASHER 8 7W C CONTROL PANEL ASSEMBLY - 2A1234A C1 T2 SCREW 4X8, SS 7P D BODY FINAL - 2A1133A E LABEL LOCATION - 3A1059G F PANEL-FRONT HINGED ASSEMBLY - 2A2011A F1 T2 SCREW 4X8, SS 7P GUSSET-FRAME GS 3A GS 4A a T2 SCREW 4X8, SS 7P PANEL-SIDE, TOP SS 2A a TRUSS HEAD SCREW 5X10 7C b TAPER COLLAR SS 4H c SCREW COUNTERSUNK 5X20, SS 7C d BRACKET HINGE GS 4A FRAME-SIDE TOP GS 2A a TRUSS HEAD SCREW 5X10 7C TOP UL COVER GS 2A a T2 SCREW 4X8, SS 7P REAR UL COVER GS 2A a T2 SCREW 4X8, SS 7P WIRE CLAMP PS 4A a T2 SCREW 4X8, SS 7P POWER CORDSET - 4A DISTRIBUTOR-AIR TOP ABS 1A a T2 SCREW 4X8, SS, SS 7P GASKET L=1061 4A0808L

6 MODEL: RH3-SSB-GD TITLE: A. REACH-IN INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 10 DISTRIBUTOR-AIR TOP ABS 1A DIVERTER-AIR 2A a T2 SCREW 4X8, SS, SS 7P b TAPER COLLAR SS 4H c SCREW COUNTERSUNK 5X20, SS 7C

7 RH3-SSB-GD B. REFRIGERATION SYSTEM (1/2) K-0, N a 34b J J1 H H L L1 21 G G1 12 7

8 RH3-SSB-GD B. REFRIGERATION SYSTEM (2/2) K a a a 8 K K Detail

9 RH3-SSB-GD B. REFRIGERATION SYSTEM (2/2) N a a a 8 K K Detail

10 MODEL: RH3-SSB-GD TITLE: B. REFRIGERATION ASSEMBLY INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 G CONDENSER ASSEMBLY - 2A1458A G1 T2 SCREW 4X8, SS 7P H EVAPORATOR ASSEMBLY - 2A1509A H1 T2 SCREW 4X8, SS, SS 7P J EVAPORATOR SHROUD ASSEMBLY - 3A1009G J1 TRUSS HEAD SCREW 4X16, SS 7C K EVAPORATOR DRAIN PAN ASSEMBLY - 4A0679A02 1 x1-4a0679a03 o1 K1 T2 SCREW 4X8, SS 7P L CONTROL BOX ASSEMBLY - 2A1785A L1 TRUSS HEAD SCREW 4X16 7C COMPRESSOR - 4A SPACER GROMMET BOLT EVAPORATOR CASE COVER - 2A1086G COMPRESSOR CONDENSER ASSEMBLY - 3A1607G PROCESS TUBE - 3A1783G TEV ASSEMBLY - 3A1346G TUBE COND-DRIER CU 4A PIPE-EVAP DRAIN PVC 3A THERMISTOR-CABINET - 4A THERMISTOR BRACKET (A) ABS a TRUSS HEAD SCREW 4X16, SS 7C THERMISTOR BRACKET (B) SS ELBOW-TUBING PP 4A BUSHING SB

11 MODEL: RH3-SSB-GD TITLE: B. REFRIGERATION SYSTEM INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 19 VINYL HOSE L= I THERMOSTAT-CLEAN FILTER 37TJ32 4A FILTER-CONDENSER - 3A DRIER C-05E73 4A DRIER STAND GS 4A x1 GS 4A o1 23a T2 SCREW 4X8, SS 7P DRIER-BRACKET GS 4A a T2 SCREW 4X8, SS 7P EXP VALVE COVER (A) PE FOAM 3A COVER-EXP VALVE PE FOAM 3A HOLDER-EXP VALVE 1/2 SS 3A SEAL-REF TUBING NP 4A HOSE CLAMP ELBOW CU ELBOW CU WIRE TIE (TWIST) A FOAM TAPE L= DRAW LATCH A a T2 SCREW 4X8, SS 7P b TRUSS HEAD SCREW 4X16, SS 7C SUCTION LINE ASSEMBLY - 3A1606G PRESSURE SWITCH SHOWN ON COND. 3A ASSEMBLY ACB-2UB25 4A

12 RH3-SSB-GD C. CONTROL PANEL ASSEMBLY K-0, N-6 8 8a a

13 MODEL: RH3-SSB-GD TITLE: C. CONTROL PANEL ASSEMBLY INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 1 PANEL-CONTROL (PAINTED GD) - 3A1572G01 1 x1-1a0632g01 o1 2 LABEL-DISPLAY - 4A MOUNT-DISPLAY BOARD PC 3A BOARD-DISPLAY 3287A000 2A NYLON SCREW 50M030050G006 4A PALNUT SR A BOARD COVER GS 3A a T2 SCREW 4X8, SS 7P CONTROL PANEL COVER GS 3A a T2 SCREW 4X8, SS 7P RIBBON CABLE D-HA-104 4A PLUG-HOLE PE 4A LOCKING HOLE PLUG 2663(BLACK) 4A LOCKING HOLE PLUG 2703(BLACK) 4A SWITCH-ROCKER A STRAIN RELIEF - 4A WASHER - 4A GROMMET STRIP L=36 4A1341L GROMMET STRIP L=66 4A1341L GROMMET STRIP L=340 4A1341L

14 RH3-SSB-GD D. BODY-FINAL K-0, N-6 M M1 10 N a

15 MODEL: RH3-SSB-GD TITLE: D. BODY-FINAL INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 M BODY-PREFINAL - 2A1132A M1 TRUSS HEAD SCREW 5X10, SS 7C N MULLION-VERTICAL - 2A1289A GLASSDOOR (RIGHT) - 2A GLASSDOOR (LEFT) - 2A CANOE CLIP A BRACKET CORNER SS 4A x8 SS 4A o COVER-CORNER ABS 3A x8 ABS 3A o8 7 WIRE CLAMP PS 4A a TRUSS HEAD SCREW 4X6 7C HINGE-TOP GLASSDOOR (RIGHT) SS 3A HINGE-BOTTOM GLASSDOOR (RIGHT) SS 3A HINGE-TOP GLASSDOOR (LEFT) SS 3A HINGE-BOTTOM GLASSDOOR (LEFT) SS 3A PIN, TORQUE A

16 RH3-SSB-GD E. LABEL LOCATION K-0, N-6 A DETAIL A 16

17 MODEL: RH3-SSB-GD TITLE: E. LABEL LOCATION INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N WIRING LABEL PVC FILM 2A LABEL-R404A - 4A LABEL-PENGUIN-HA (L) - 4A LABEL-ON/OFF PVC FILM 4A EMBLEM-HOSHIZAKI - 4A LABEL-DISPLAY INFO PVC FILM 3A LABEL-DOOR HEATER SWITCH PVC FILM 4A CAUTION LABEL PVC FILM 4A LABEL-GLASS DOOR HEATER SWITCH PVC FILM 4A

18 RH3-SSB-GD F. PANEL - FRONT HINGED ASSEMBLY K-0, N a

19 MODEL: RH3-SSB-GD TITLE: F. PANEL-FRONT HINGED ASSEMBLY INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 1 HINGE-FRONT PANEL (L) GS 4A HINGE-FRONT PANEL (R) GS 4A CHANNEL-HINGE GS 4A A TRUSS HEAD SCREW 5X8 7C PANEL-FRONT SS 1A A

20 RH3-SSB-GD G. CONDENSER ASSEMBLY K a 14 14a a a a 7 7a 10 20

21 RH3-SSB-GD G. CONDENSER ASSEMBLY N a 4 6 6a a 7 7a 10 21

22 MODEL: RH3-SSB-GD TITLE: G. CONDENSER ASSEMBLY INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 1 CONDENSER A SHROUD-CONDENSER GS 2A a T2 SCREW 4X8, SS 7P FAN MOTOR U90B SELF LOCKING NUT #8x32 7N21I FAN BLADE (PULLER) ALUMINUM 4A BRACKET-CONDENSER FAN MOTOR GS 2A a TRUSS HEAD SCREW 5X10 7C RETAINER-FILTER SS 4A a T2 SCREW 4X6 7P INSERT-THREADED M5 4A CABLE TIE CV BASE-CONDENSER GS 2A GROMMET STRIP L-460 4A1341L SWITCH-PRESSURE D94V 3A PS024WT500K330K - 4A NOW SHOWN ON REF. CIRCUIT 13 BRACKET-PRESS SWITCH GS 4A a T2 SCREW 4X8, SS 7P BRACKET-PRESS SWITCH (B) GS 4A a T2 SCREW 4X8, SS 7P GROMMET STRIP L=52 4A1341L GROMMET STRIP L=51 4A1341L CAPACITOR UP25B505UEF a T2 SCREW 4X8, SS 7P

23 RH3-SSB-GD H. EVAPORATOR ASSEMBLY K-0, N-6 2a a 23

24 MODEL: RH3-SSB-GD TITLE: H. EVAPORATOR ASSEMBLY INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 1 BRACKET-EVAP SHROUD (R) SS 4A a T2 SCREW 4X8, SS, SS 7P BRACKET-EVAP SHROUD (L) SS 4A a T2 SCREW 4X8, SS, SS 7P EVAPORATOR 3EZ0603KT 2A THERMISTOR-CLIP THERMISTOR DEFROST - 4A DISTRIBUTOR - 4A DISTRIBUTOR - 4A

25 RH3-SSB-GD J. EVAPORATOR SHROUD ASSEMBLY K-0, N-6 2 2b 2a 1 3 MODEL: RH3-SSB-GD TITLE: J. EVAPORATOR SHROUD ASSEMBLY INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 1 BLADE-FAN(PUSHER) AIR DRIVE INC. 3A AD9CCW30UBA 2 EVAPORATOR FAN ASSEMBLY - 4A T2 SCREW 4X8, SS, SS 7P LOCK WASHER - 4A a MOTOR EVAP FAN - 4A b ORIFICE EVAP FAN - 4A SHROUD-EVAP SS 1A TRUSS HEAD SCREW 4X10, SS 7C

26 RH3-SSB-GD K. EVAPORATOR DRAIN PAN ASSEMBLY K-0, N-6 5 5a

27 MODEL: RH3-SSB-GD TITLE: K. EVAPORATOR DRAIN PAN ASSEMBLY INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 1 PAN EVAPORATOR DRAIN SS 2A FITTING-DRAIN OVERFLOW NYLON 4A RUBBER GASKET GASKET-COND COIL R-471E SBE-41 4A STRAP-CONDENSATE COIL SS 3A x1 SS 3A o1 5a TRUSS HEAD SCREW 5X10, SS 7C

28 RH3-SSB-GD L. CONTROL BOX ASSEMBLY K-0, N-6 4 4a 34 34a a a a

29 MODEL: RH3-SSB-GD TITLE: L. CONTROL BOX ASSEMBLY INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 1 BOARD-CONTROL 3288C00 2A BOARD SUPPORT NYLON 4A BASE-CONTROL BOX GS 2A COVER-CONTROL BOX GS 2A a T2 SCREW 4X8, SS 7P SWITCH-BRACKET GS 2A a T2 SCREW 4X8, SS 7P BUSHING SB BUSHING SB BOARD CONNECTOR BOARD CONNECTOR BOARD CONNECTOR PLUG HOUSING (9 PIN) P RECEPTACLE HOUSING (9 PIN) R PLUG HOUSING (6 PIN) P RECEPTACLE HOUSING (6 PIN) R PLUG HOUSING A RECEPTACLE HOUSING A SWITCH-TOGGLE 780K21 4A SWITCH-ROCKER A TRANSFORMER - 3A A INTERCHANGEABLE BUT REQUIRES INDEX #35 AND WIRING 20 TAPPING SCREW 3X COMP RELAY HE1aN-AC120V 4A TAPPING SCREW 3X RECEPTACLE HOUSING (4 PIN) R PLUG HOUSING (4 PIN) P

30 MODEL: RH3-SSB-GD TITLE: L. CONTROL BOX ASSEMBLY INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 25 RECEPTACLE HOUSING (2 PIN) R PLUG HOUSING (2 PIN) P TERMINAL BLOCK - 4A x1 4A o1 28 TAPPING SCREW CAPACITOR-START 3A CAPACITOR-RUN 4A x1 3A o1 31 RELAY-START 4A a T2 SCREW 4X8, SS 7P MOUNT BRACKET 4A a T2 SCREW 4X8, SS 7P GROUNDING SCREW(M5) STRAP a T2 SCREW 4X8, SS 7P BOARD CONNECTOR

31 RH3-SSB-GD M. BODY-PREFINAL K-0, N-6 1 6a a a 31

32 MODEL: RH3-SSB-GD TITLE: M. BODY-PREFINAL INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 1 CABINET-PREFOAM - 2A1018G BUSHING OCB PILASTER SS 3A a TRUSS HEAD SCREW 5X10, SS 7C INSERT-THREADED (M5) PS 4A VINYL HOSE L= I DIVIDER-AIR SS 2A a T2 SCREW 4X8, SS, SS 7P DISTRIBUTOR-AIR (BOTTOM) SS 1A a T2 SCREW 4X10, SS 7P GASKET-PVC L=537 4A0414L GASKET-PVC L=1449 4A0414L GASKET-PVC L=792 4A0414L

33 RH3-SSB-GD N. MULLION-VERTICAL K-0, N-6 FOR NON-INTERCHANGEABLE PARTS CHANGE NOTICE AT AUXILIARY CODE N-6, SEE NOTES ON PAGE a 6a 1 2 2a 3 MODEL: RH3-SSB-GD TITLE: N. MULLION VERTICAL INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 1 MULLION-PREFOAM - 2A1288G PILASTER-MULLION SS 2A a TRUSS HEAD SCREW 4X20, SS 7C INSERT-THREADED PS 4A INSERT-THREADED (WIDE) PS 4A a WASHER 8, SS 7W BULB-LIGHT 40A15 4A x1 A-15 4A o1 6 SHIELD-LIGHT # A a CHEESE HEAD SCREW 5X12, SS 7C LAMPHOLDER L20-X006 4A SEE NOTE PAGE 34 33

34 AT AUXILIARY CODE N-6, THE SANTOPRENE LIGHT SOCKET WAS CHANGED TO A PORCELAIN LAMPHOLDER. THIS CHANGE IS NON-INTERCHANGEABLE. IF THE UNIT HAS AN AUXILIARY CODE OF N-6 OR LATER, SIMPLY ORDER THE PART THAT NEEDS TO BE REPLACED: IF THE UNIT HAS AN AUXILIARY CODE EARLIER THAN THAN N-6, AND THE LIGHT SOCKET IS NOT OPERATING, IT IS RECOMMENDED TO CHANGE THE ENTIRE ASSEMBLY TO HS-3554: NOTE: PARTS 5 AND 6 ARE NOT INCLUDED IN HS-3554; THEY ARE SHOWN FOR REFERENCE ONLY. 34

35 MODEL: RH3-SSB-GD TITLE: P. LITERATURE & PACKAGING INDEX NO. DESCRIPTION MATERIAL OR MODEL PART REQUIRED K-0 N-6 1 INSTRUCTION MANUAL PAPER 91A34010L 1 1 PACKAGING AVAILABLE ONLY ON 1A0767A05 MODELS CURRENTLY IN PRODUCTION 1 PALLET - 3A HEX HEAD BOLT 5/8-11 UNC 2 in. 7B01I FLAT WASHER 5/8 USS 7W21I STOP DOOR - 4A CABLE TIE CV SHELF CENTER (3 PACK) - HS SHELF (3 PACK) - HS LEG (4 PACK) - HS LEG (2 PACK) - HS PAD CORNER - 3A FILLER DOOR - 4A STABILIZER DOOR - 4A PROTECTOR HANDLE - 3A POST CORNER - 3A SUPPORT CORNER - 3A PROTECTOR FRONT - 3A