TAC J-Series Turning Toolholder for Small Lathes
|
|
|
- Ralph McLaughlin
- 5 years ago
- Views:
Transcription
1 AC J-Series urning oololder or Small Lates Selection Guides o J-series Speciications For General urning For Front & everse urning and Parting For Back urning For Grooving and Parting For reading Boring oololder
2 266 AC urning oololder or Small Lates s Parting JSXG JCGSS JCCWS JCGWS Back turning JSXB JSB JSEG JS-BL3 External turning JDJ2C JAC JSDJ2C JSAC JSVJB JCL2C JSVJ2B JSCL2C JSDNCN JSCAC JAN JSDFC reading JSXB JS JS-L3 Internal turning JS08H-SEXP AC urning oololder or Small Lates (or J-series) 9025 NS530 Grooving JSG JSVG JS-GL3 CVD coated caride Cermet everse turning JSXG Front turning JSXG Features External turning JS-SDUCL Universal grade or to rouging applications o steels in speed range (P20 - P30) Wear resistant grade or general application wit well alanced tougness J740 J530 H10 PVD coated ine grain caride PVD coated Cermet Uncoated caride Excellent sarp edge Outstanding tougness and edge staility or macining o steels and stainless steels New J-coat coating especially or small part macining Sarp edge or super surace quality Extremely wear-resistant and minimum edge uild-up Applicale or a wide range o work materials
3 J-series 267 -C type 45 no intererence Min. ø 8 40 Specially suited or cam style small lates Multi-unctional s: - External turning - Facing - Back turning - Front and everse turning - Grooving and Parting - reading J740 PVD coated ultra ine grain sustrate or extremly sarp edges Design o edge Breakage J740 Conventional caride J740 Conventional caride oololder wit side-clamping Innovative clamping system or stale clamping o te insert. Easy and quick canging o insert, as te toololder does not ave to e removed. Insert Lever Screw Wrenc AC urning oololder or Small Lates Low distance For negative inserts - JAN type: p.274 For positive inserts - JDJ2C type: p JAC type: p JCL2C type: p.271
4 268 AC urning oololder or Small Lates External turning External turning & Proiling Insert type Page oololder Sank type Clamping Positive p.271 p.272 p.273 p.273 p.273 p.283 JDJ2C/L JSDJ2C/L JSVJB/L JSVJ2B/L JSDNCN JS-SDUCL ø ø25.4 side screw-on screw-on screw-on screw-on screw-on AC urning oololder or Small Lates External turning & Facing Insert type Page oololder Sank type Clamping Positive External turning Insert type Page oololder Sank type Clamping p.271 p.272 p.274 p.274 JCL2C/L JSCL2C/L JSCAC/L JSDFC/L side screw-on screw-on screw-on Positive Negative p.271 p.272 p.274 JAC/L JSAC/L JAN/L side screw-on side
5 J-series 269 Back turning Page oololder Sank type ap p.277 p.278 p.278 p.283 JSXB/L JSB/L JSEG/L JS-BL ø ø everse turning Page oololder Sank type ap Front turning p.276 Page p.276 JSXG/L oololder JSXG/L Sank type ap 5.5 AC urning oololder or Small Lates
6 270 AC urning oololder or Small Lates External grooving Grooving Page oololder Sank type Grooving widt grooving dept p.279 p.280 p.284 JSVG/L JSG/L JS-GL ø ø Parting Page oololder Sank type Grooving widt parting-ø p.276 p.280 p.281 p.281 JSXG/L JCGSS/L JCCWS/L JCGWS/L ø9-12 ø20-32 ø20 ø20 AC urning oololder or Small Lates reading and internal turning reading Page oololder Sank type Pitc p.282 p.277 p.284 JS/L JSXB/L JS-L ø ø Internal turning Page oololder JS08H-SEXP Sank type ø8.0 Min. ore-ø ø p.282
7 J-series 271 oololder wit side-clamping (positive) External turning JAC /L inising Finising to Finising to 01 PS PM SS (11) (11) (11) (11) Finising Aluminium J** AL (08, 11) (11) Lever Screw Wrenc L 1 JAC/L0810K C**0802** JCP-1 JAC/L1010K JDS-3525 P-2F JAC/L1212M C**1102** JCP-2 JAC/L1616M External turning & Facing JCL2C /L inising Finising Finising to 01 PF PS PM (06, 09) (06, 09) (06, 09) (06, 09) inising Finising Finising to Finising to Aluminium CBN/PCD J** W** - AL Lever Screw Wrenc L 1 JCL2C/L0810K CC**0602** JCL2C/L1010K JCP-2 JDS-3525 P-2F JCL2C/L1212M CC**093** JCL2C/L1616M JCP-3 JDS-5040 P-2.5F External turning & Proiling JDJ2C /L (06, 09) (06, 09) (06, 09) (06, 09) (06, 09) inising Finising Finising to 01 PF PS PM AC urning oololder or Small Lates (07, 11) (07, 11) (07, 11) (07, 11) (07, 11) (07, 11) (07, 11) (07, 11) (07, 11) Lever Screw Wrenc L 1 JDJ2C/L0810K DC**0702** JDJ2C/L1010K JCP-2 JDS-3525 P-2F JDJ2C/L1212M DC**113** JDJ2C/L1616M JCP-3 JDS-5040 P-2.5F inising Finising Finising to Finising to Aluminium CBN/PCD J** W** - AL
8 272 AC urning oololder or Small Lates oololder wit screw-on clamping (positive) External turning JSAC /L inising Finising to Finising to 01 PS PM SS (11) (11) (11) (11) Finising J** Aluminium AL (08, 11) (11) Clamping screw Wrenc L 1 (optional) JSAC/L0808K C**0802** JSAC/L1010K CSB-2L -6F (-6L) JSAC/L1212K C**1102** JSAC/L1616H CSB-2.5-8F (-8L) AC urning oololder or Small Lates External turning & Facing JSCL2C /L 5 95 Clamping screw Wrenc L 1 (optional) JSCL2C/L1010K CC**0602** CSB-2.5-8F (-8L) JSCL2C/L1212K External turning & Proiling JSDJ2C /L inising 01 PF PS PM (06) (06) (06) (06) inising Finising Finising Finising to Finising to Finising to (06) (06) (06) (06) (06) 01 PF PS PM Aluminium CBN/PCD J** W** - AL inising Finising Finising to (07) (07) (07) (07) (07) (07) (07) (07) (07) Clamping screw Wrenc L 1 (optional) JSDJ2C/L1010K DC**0702** CSB-2.5-8F (-8L) JSDJ2C/L1212K inising Finising Finising to Finising to Aluminium CBN/PCD J** W** - AL
9 J-series 273 External turning & Proiling JSVJB /L Finising to PS Finising J** (11) (11) Clamping screw Wrenc L 1 (optional) JSVJB/L1010H JSVJB/L1212H11 VB*1103** CSB-2.5-8F (-8L) JSVJB/L1616H External turning & Proiling JSVJ2B /L 93 Clamping screw Wrenc L 1 (optional) JSVJ2B/L1010H JSVJ2B/L1212H11 VB*1103** CSB-2.5-8F (-8L) JSVJ2B/L1616H External turning & Proiling JSDNCN inising Finising to PS Finising J** (11) (11) Finising Finising to 01 PF PS PM AC urning oololder or Small Lates (07, 11) (07, 11) (07, 11) (07, 11) inising Finising Finising to Finising to Aluminium CBN/PCD J** W** - AL (07, 11) (07, 11) (07, 11) (07, 11) (07, 11) Clamping screw Wrenc 1 (optional) JSDNCN1010K DC**0702** CSB-2.5 JSDNCN1212K F (-8L) JSDNCN1616H11 DC**113** CSB-4SD
10 274 AC urning oololder or Small Lates External turning & Facing JSCAC /L inising Finising Finising to 01 PF PS PM (06, 09) (06, 09) (06, 09) (06, 09) inising Finising Finising to Finising to Aluminium CBN/PCD J** W** - AL (06, 09) (06, 09) (06, 09) (06, 09) (06, 09) Clamping screw Wrenc L 1 (optional) JSCAC/L0808H CC**0602** CSB-2.5 JSCAC/L1010H F (-8L) JSCAC/L1212H09 CC**093** CSB-4SD External turning & Facing JSDFC /L inising Finising Finising to 01 PF PS PM AC urning oololder or Small Lates 91 (07, 11) (07, 11) (07, 11) (07, 11) (07, 11) Clamping screw Wrenc L 1 (optional) JSDFC/L1212H07 DC**0702** CSB-2.5 JSDFC/L1616H11 DC**113** CSB-4SD oololder wit side-clamping (negative) External turning JAN /L F (-8L) 01 C P S (07, 11) (07, 11) (07, 11) (07, 11) inising Finising inising Finising to inising Finising to Aluminium CBN/PCD J** W** - AL Finising (16) (16) (16) (16) 91 1 Lever Screw Wrenc L 1 JAN/L1216K N**1604** JCP-3N JDS-5040 P-2.5F JAN/L1616K
11 J-series 275 Cutting conditions (or J-series) Steel Work material Cipreaker Stainless steel Cast iron Non-errous metals Dicult-to-cut materials Hardened steel inising Finising inising Finising Finising Finising Finising Finising Cutting dept ap Feed (mm/rev) Cutting speed Vc (m/min) 01 J J J NS J J J J NS J J H J H J H J H Cutting conditions (or asic grades and cipreaker) Work material Steel Stainless steel Cast iron Cutting speed CVD PVD Cermet Cerm. coated Vc (m/min) GH NS530 G GH NS530 G GH Cipreaker Cutting dept ap Feed (mm/rev) PF PS PM C S P AC AC urning oololder or Small Lates
12 276 AC urning oololder or Small Lates Front and everse turning JSXG /L 40 -C-type Clamping screw Wrenc L 1 (optional) JSXG/L1010K8-C JSXG/L1212K8-C JXF/L8*** JSXG/L1616K8 JX/L8*** CSB-4SD -8F (-8L) JSXG/L2020K8 JXG/L8*** JSXG/L2525K8 or Parting Note: C-type toololders are marked : everse turning F: Front turning C: Parting (deep-grooving) AC urning oololder or Small Lates θ W JXF-type inserts or ront turning (sarp edge) Coated Cermet Caride J740 NS530 H10 dept ap L L L JXF/L8000F JXF/L8010F JX-type inserts or reverse turning (sarp edge) Coated Cermet Caride J740 NS530 H10 dept ap L L L JX/L8000F JX/L8010F JXG-type inserts or parting (sarp edge) Coated Cermet Caride grooving W ±0.025 θ J740 NS530 H10 dept ap L L L JXG/L8070FA JXG/L8100FA JXG/L8100FA JXG/L8120FA JXG/L8150FA JXG/L8150FA JXG/L8180FA JXG/L8200FA 2.0
13 J-series 277 Back turning JSXB /L ap = 5.5 mm -C-type Clamping screw Wrenc L 1 (optional) JSXB/L1010K8-C JSXB/L1212K8-C JXB/L8*** JSXB/L1616K CSB-4SD -8F (-8L) JX*/L JSXB/L2020K8 or treading JSXB/L2525K Note: C-type toololder are marked B:Back turning : reading JXB-type inserts or ack turning Coated Cermet Caride Honing dept J740 NS530 H10 ap L L L JXB/L8000F 0.03 JXB/L8005F 0.05 witout JXB/L8010F 0.10 JXB/L8015F JXB/L JXB/L8010 wit 0.10 JXB/L AC urning oololder or Small Lates θ 0.6 θ JX-type inserts or treading (sarp edge) Coated Cermet Caride S θ J740 NS530 H10 L L L S S JX1* JX2* JX1/L6000F JX2/L6000F Notes: or pitces o 0.5 to 1.0 mm rigt toololder wit rigt insert, let toololder wit let insert
14 278 AC urning oololder or Small Lates Back turning JSB /L 1 ap = 2.5 mm c Clamping screw Wrenc L 1 c (optional) JSB/L1010K JSB/L1212K3 JB/L3*** CSB-4SD -8F (-8L) JSB/L1616K JB-type inserts or ack turning Coated Cermet Caride Honing J740 NS530 H10 dept ap L L L JB/L3000F 0.03 JB/L3005F 0.05 witout JB/L3010F 0.10 JB/L3015F JB/L JB/L3010 wit 0.10 JB/L AC urning oololder or Small Lates Back turning JSEG /L ap = 3 mm 1 Clamping screw Wrenc L 1 (optional) JSEG/L1010K JSEG/L1212K10 J10E/L***B* CSB-2.5-8F (-8L) JSEG/L1616K J10E-type inserts or ack turning Coated Cermet Caride Honing J740 NS530 H10 dept ap L L L J10E/L005BF 0.05 J10E/L010BF witout 0.10 J10E/L015BF J10E/L005B 0.05 J10E/L010B wit 0.10 J10E/L015B 0.15
15 J-series 279 Parting: JSXG; see p. 276 Grooving JSVG /L C-type 1 Clamping screw Wrenc L 1 (optional) JSVG/L1010K-C JSVG/L1212K-C JVG/L*** CSB-3S -9F (-9L) JSVG/L1616K Note: C-type toololder are marked G: Grooving W G JVG-type inserts or grooving (sarp edge) Coated Cermet Caride grooving W ±0.025 G dept J740 NS530 H10 ap L L L JVG/L033F JVG/L050F JVG/L075F JVG/L095F JVG/L100F JVG/L125F JVG/L150F JVG/L200F 2.00 Cutting conditions or grooving (JSXG: p. 276 / JSVG: p. 279) Steel Work material Stainless steel Aluminium, Brass etc. Dicult-to-cut materials itanium alloys etc. Feed (mm/rev) Cutting speed Vc (m/min) J NS530 J H H AC urning oololder or Small Lates
16 280 AC urning oololder or Small Lates Grooving JSG /L c 1 Clamping screw Wrenc L 1 c (optional) JSG/L1010K JSG/L1212K3 JG/L3*** CSB-4SD -8F (-8L) JSG/L1616K AC urning oololder or Small Lates Groov -ing widt w 2 JCGSS /L W G Parting & Grooving Parting ø D JG-type inserts or grooving (sarp edge) Coated Cermet Caride grooving W ±0.025 G dept J740 NS530 H10 ap L L L JG/L3033F JG/L3050F JG/L3075F JG/L3095F 0.95 JG/L3100F 1.00 JG/L3125F JG/L3145F JG/L3150F JG/L3175F 1.75 JG/L3200F JG/L3250F w Clamping screw Wrenc L 1 Parting ød JCGSS/L ø20 2 JCGSS/L GE ø25 CSB-3-9F JCGSS/L ø32 W L W L GE-type inserts or parting and grooving W L Coated Cermet Caride 9025 GH730 NS530 KS05F GE GE20 GE20-AL GE20-AL
17 J-series 281 Parting JCCWS /L 2 Parting ø 20 mm 1 Clamping screw Wrenc L 1 parting-ø (optional) JCCWS/L1010K JCCWS/L1212K JCCWS/L1616K2 JCC*200F ø20 CSB-4S -15F (-15L) JCCWS/L2020K JCCWS/L2525K W L W θ L JCC-type inserts or parting (sarp edge) Coated Caride W L θ J740 J530 H10 L L L (JCCN200F) (JCC200F) JCCN200F JCC/L200F 15 Parting JCGWS /L Parting ø 20 mm 1 2 Clamping screw Wrenc L 1 parting-ø (optional) JCGWS/L1010K JCGWS/L1212K2 JCGN200* ø20 CSB-4S -15F (-15L) JCGWS/L1616K AC urning oololder or Small Lates W W (JCGN200F) L (JCGN200F) 8 JCG-type inserts or parting (sarp edge) Coated Caride W L J740 J530 H10 L L L JCGN200F JCGN200F/L
18 282 AC urning oololder or Small Lates reading JS /L 5 c 1 Clamping screw Wrenc L 1 c (optional) JS/L1010K JS/L1212K3 J/L3**** CSB-4SD -8F (-8L) JS/L1616K θ S J-type inserts or treading (sarp edge) Coated Cermet Caride S θ J740 NS530 H10 L L L J/L3005F J/L3010F J/L3005F Note: or pitces o 0.5 to 1.0 mm AC urning oololder or Small Lates reading: JSXB; see p. 277 Boring toololder wit screw-on clamping (positive) Internal turning & Facing JS08H-SEXP α 10 α JS08H-SEXP EP**0401** CSB-2-6F JS08H-SEXP ød 3-M5X0.8 l Min. ore-ø: ød Min. oreød Std. nose rc or internal turning and acing Coated Cermet Inner circle ø ickness Hole-ø Corner radius J740 EPG040100L-J EPG040102L-J EPG040104L-J Sleeves Sank-øD l BLM BLM BLM BLM g7 Clamping screw Wrenc
19 J-series 283 External turning & Proiling JS-SDUCL inising Finising Finising to 01 PF PS PM g (07, 11) (07, 11) (07, 11) (07, 11) inising Finising Finising to Finising to Aluminium CBN/PCD J** W** - AL Let and (L) sown (07, 11) (07, 11) (07, 11) (07, 11) (07, 11) Min. Clamping screw Wrenc oreød g L JS19K-SDUCL JS20K-SDUCL07 DC**0702** CSB-2.5 JS22K-SDUCL JS19K-SDUCL F JS20K-SDUCL DC**113** JS22K-SDUCL CSB-4SD JS25K-SDUCL Back turning JS-BL3 L JS19K-BL JS20K-BL JB30** CSB-4S -15F JS22K-BL JS25K-BL Let and (L) sown Clamping screw Wrenc AC urning oololder or Small Lates Note: rigt toololder wit let insert, let toololder wit rigt insert JB-type inserts or ack turning Coated Cermet Caride Honing J740 NS530 H10 dept ap L L L JB/L3000F 0.03 JB/L3005F 0.05 witout JB/L3010F 0.10 JB/L3015F JB/L JB/L3010 wit 0.10 JB/L
20 284 AC urning oololder or Small Lates Grooving JS-GL3 AC urning oololder or Small Lates JS19K-GL JS20K-GL JG3*** CSB-4S -15F JS22K-GL JS25K-GL JS-L3 W G Note: rigt toololder wit let insert, let toololder wit rigt insert reading L JG-type inserts or grooving (sarp edge) Coated Cermet Caride grooving W ±0.025 G dept J740 NS530 H10 ap L L L JG/L3033F L JG/L3050F JG/L3075F JG/L3095F 0.95 JG/L3100F 1.00 JG/L3125F JG/L3145F JG/L3150F JG/L3175F 1.75 JG/L3200F JG/L3250F Let and (L) sown Clamping screw Wrenc JS19K-L JS20K-L J30** CSB-4S -15F JS22K-L JS25K-L Let and (L) sown Clamping screw Wrenc θ S J-type inserts or treading (sarp edge) Coated Cermet Caride S θ J740 NS530 H10 L L L J/L3005F J/L3010F J/L3005F Notes: or pitces o 0.5 to 1.0 mm let toololder wit rigt insert
Keeping the Customer First. Tungaloy Report TE0407-E3. Turning tools. J-series. Precision tools for small turning lathes
Keeping te Customer First Tungaloy eport TE0407-E3 Turning tools J-series tools or small turning lates tools or small turning lates Features Tungaloy s newly developed J-series or CNC and automatic small
Cut-Off Tools. SumiGrip Jr. SumiGrip. SEC-Small Diameter Cut-off Tools SEC-Grooving / Cut-Off Tools
Tools 33 to 46 Tools Tools SumiGrip Jr. SumiGrip SEC-Small Diameter Cut-off Tools SEC- / Tools SEC- Tool Series Selection Guide 34 Introduction of SumiGrip 35 STH Type 36 STS Type 37 WCH Type 38 WCS Type
NSK Linear Guides. HA Series for Machine Tools
NS inear Guides A Series for Macine ools Premier motion accuracy and rigidity innovative linear guide design, compatible wit ig precision macine tools Patent Pending Unparalleled motion accuracy, rigidity,
ISCAR s Innovative Clamping System for Rough Turning
TURNING JANUARY Page 1 / 19 ISCAR s Innovative Clamping System or Roug Turning JANUARY Page 2 / 19 Higligts ISCAR as developed an innovative dovetail pocket combined wit a lever clamping mecanism. Te new
New High Pressure Coolant Capable Groove-Turning and Parting Tools
1/10 New Hig Pressure Coolant Capable Groove-Turning and Parting Tools 2/10 In order to meet te macining needs of difficult-to-cut materials suc as titanium, inconel and oter eat resistant alloys, TaeguTec
THE COMPLETE GROOVING SYSTEM. Part 2. Two cutting edge inserts in the width range mm. Toolholders for OD and ID machining
olid carbide coated wit PVD and CVD layer PCD MCD CBN THE COMPETE GROOVING SYSTEM Part 2 Two cutting edge inert in te widt range 2.0-6.0 mm Toololder for OD and ID macining Toololder for radial and axial
A SH Series. SH Series. 2. Ball slide shape
S Series -5-1.2 S Series 1. eatures (1) ower noise and gentler tone Incorporating a retaining piece and optimizing te circulation pat enables steel ball circulation stability and te prevention of ball
A LH Series. LH Series. 2. Ball slide shape
Series -5-1.1 Series are also available in randam matcing. (Special ig-carbon steel products for 15 to 45) 2. all slide sape all slide Model Sape/installation metod ype (Upper row, Rating: ower row, all
Reduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
New wiper insert series for advanced turning operations
TurnLine Tungaloy Report No. 434-US New wiper insert series or advanced turning operations FW & SW 2 FW & SW TurnLine Only al te surace rougness even at doubled eed rate compared to regular ISO insert
SEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance
Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance
Wide variety of tools drastically reduce set up time!
Tungaloy Report No. 344-E5 Ne grooving and parting off tools Extended version it ne items Wide variety of tools drastically reduce set up time! Featuresof My T series For aluminium GE-AL Widt: 2.0 ~ 4.0
Chapter Composition of TAC Internal Toolholders
Cast lron Superalloys Stainless Nonerrous Wit cipbreaker Capter Composition o Products are arranged by te series as ollows: Stream Jet Bars General purpose TAC boring toololders In te same series, tey
Mining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
T-nuts, jaw blanks 54 SMW-AUTOBLOK
T-nuts, jaw blanks 54 SMW-AUTOBLOK T-nuts grippers SMW-AUTOBLOK Berg Forkardt owa Kitagawa Röm Scunk ST T-nuts for cucks ST IC serration 1/16 x 90 or 3/32 x 90 Page 56 STE double T-nuts for cucks STE IC
DURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
-Smart YE-IS16. Y-Coated Modular type End Mill. Ultra-micro Grain Carbide Heads with Carbide & Steel Holders
YE-IS16 Y-Coated End Ultra-micro Grain Carbide Heads with Carbide & Steel Holders Exchangeable Modular heads for Finishing & Semi-Finishing The most cost reducing solution with various compatibility. Y-Coated
High Pressure Coolant Tool
1/14 Hig Pressure Coolant Tool 2/14 Hig Pressure Coolant Tool Taegutec is pleased to introduce, T-BURST, a new tool older system or turning application tat is capale o delivering ig pressure coolant directly
EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
Improved Grooving Performance with Expansive Tooling System Lineup
KGD/KGDF Grooving / Cut-Off Improved Grooving Performance with Expansive ooling System ineup Good Chip Control EGACOA Coating echnology for ong ool ife and igh Efficiency achining Comprehensive ineup KGD
High Pressure Coolant Tool
1/14 Hig Pressure Coolant Tool 2/14 Hig Pressure Coolant Tool Taegutec is pleased to introduce, T-BURST, a new tool older system or turning application tat is capale o delivering ig pressure coolant directly
A LH Series. LH Series A162. (2) Ball slide shape
Series -5-1.3 Series (2) all slide sape all slide Model Sape/installation metod ig-load type ype Super-ig-load type 1 1 (1) eatures 1. ig self-aligning capability (rolling direction) Same as te D combination
GBA. Grooving with 3 Cutting Edges. Smooth Chip Evacuation with Molded Chipbreaker
G Grooving with 3 Cutting Edges Smooth Chip Evacuation with Molded Chipbreaker Large Lineup of Chipbreakers and Grades Smooth Chip Control with GM Chipbreaker NEW ybrid N620 G Grooving with 3 Cutting Edges
SAF-CUT SYSTEM TURNING / PARTING & GROOVING / PROGRAM OVERVIEW PARTING GROOVING TURNING
/ PARTING & GROOVING / PROGRAM OVERVIE SAF-CUT SYSTEM PARTING 151.20 151.2 N2 N3 N4 N5 Sank... p 184 Blade... p 189 Blade olde. p 190 p 180 p 180 p 181 p 181 GROOVING 151.22 151.23 N2 N3 N4 N5 G4 Sank...
KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools
KOOL Cut TM Modular Turning & Grooving Section F of 2017 Indexable Cutting Tools Turning, Facing & Grooving System KOOL Cut Modular Turning, Facing & Grooving System-Technology KOOL Cut Graphic Index ---------------------------------------------------------------------------------------------------------------------------------
A VH Series. VH Series. AComparison with NSK standard products
133-5-1.2 1. eatures (1) ig-performance end seals ig-performance end seals wit a multi-lip structure prevent te entry of various foreign matters. (2) lubrication unit (standard) Outstanding lubrication
CERATIZIT designation system
C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,
KGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off
Grooving / Cut-Off KGD/KGDF Grooving / Cut-Off KGD/KGDF Improved Grooving Performance with Expansive ineup of Chipbreakers and s Good chip control EGACOAT coating technology for long tool life and high
-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
Highly Rigid Internal Toolholders with Excellent Chip Evacuation
Keeping te Customer First Tungaloy Report No. 357-E2 TAC Boring Bars Extended Version Higly Rigid Internal Toololders wit Excellent Cip Evacuation TUNGALOY Extensive simulation analysis as enabled Tungaloy
Grooving / Cut-Off. Threading Tools F63
/ / 1 42 Triangular hallow Inserts (or External and Internal Grooves) External ace Internal Hardened teel Expanded Expanded Expanded EC- election Guide...2 GWC Type (or hallow Grooves)... 4 GWC Type (or
Shunt wires SHUNT WIRE (JA type)
SHUN WIRE (JA type) 2-ød in-plated in-plated 1 1 art No. JA 1- JA 2- JA - JA 4- JA 5- JA 6- JA 7- JA 8- JA 9- JA 10- JA 11- JA 12- JA 1- JA 14- JA-2501 JA-2502 JA-250 JA-2504 Dimensions ød B 1
Bridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
Goose-neck Holder. VB/VC Insert (Without Offset / With Offset) E30 VP Insert (Without Offset / With Offset) E32. External Sleeve Holder
1~48 ummary of Turning / Advice on one point Identification ystem 2~10 11 Toololders for ack Turning 12~19 TKF (ack Turning, Goose-neck Holder) 12 TKF-A (ack Turning, Goose-neck Holder) 16 A (ack Turning)
High Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
KFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
No: Features MGMN-G MGMN-M MRMN-M MRGN-A
No: 96-10 MGMN-G Features - Unique W shape strong clamping system ensures stability of machining - M.G.T Insert can be used at Internal operations as well as External operations - M.G.T Insert s M chip
3 Cutting Edges Use GBA for Grooving
CP188-E 3 Cutting Edges Use G for Grooving Wide Product Lineup PVD Coated for Steel / PR905 Smooth Chip evacuation due to no interference on the chip pocket External Grooving Internal Grooving G-MY New
External Grooving. Summary of External Grooving. Internal Grooving. Summary of Internal Grooving. Face Grooving. Summary of Face Grooving
1~108 External Summary of External 2 KA / KAS 9 K / KS ill be switched to KA / KAS 11 KFF 12 KFF / KF 14 S...KF Sleeve older 15 K ill be switched to KA 16 KD (Integral ype for Automatic athe) 21 KD (Integral
New PVD grade for general purpose is added in multi-functional series
TurnLine www.tungaloy.com Tungaloy Report No. 391-E TUNGCUT New PVD grade for general purpose is added in multi-functional series ACCELERATED MACHINING TurnLine Multi-functional tool system for diverse
HIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH
IG EED ALUIIU ACIIG WIT ULTRA IG ETAL REOVAL & EXCELLET URFACE FII teel ardened teel tainless teel RA s Cast Iron on Ferrous TE O. 1 ILLIG YTE FOR ALUIIU, COER, LATIC & BRA, OFFERIG IRROR FII ULTRA IG
KFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
KGBA / KGBAS. VNG System Tip-bars G43 HPG 2-Edge Tip-Bar G44 PSFG-S Will be switched to HPG Tip-Bars G44 SIGE-EH / SIGE-WH / SIGE-WH-90
1~96 Summary of External, Internal and Face 2~9 External KBA / KBAS 13 KB / KBS ill be switched to KBA / KBAS 15 KFF / KF 16 S...KF Sleeve holder 16 K ill be switched to KBA 18 KN91 19 K / KS 20 KA 21
KFD-HS. Power chucks with through-hole. Technical features:
K-S ower cucks wit troug-ole ecnical features: Wedge ook system wit annular piston for igest accuracy in case of loss of centrifugal force bove-average mecanical efficiency Very few components, long jaw
Grooving Tool Holders GND Type
TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving
Table 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
KGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
KFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
HCG - HORN Catalog Guide
CG - ORN Catalog Guide INTERNAL GROOVING Product line ore Ø 217 S274 S223 S224 231 S229/229 S312/312 315 S316.625 (15.87 mm).709 ( 18 mm).787-1.102 (20-28 mm) 1.102-1.496 (28-38 mm) > 1.496 (38 mm) Operation
GrooVical Precise Grooving & Turning Applications METRIC. Innovative Grooving & Turning Solutions
GrooVical Precise Grooving & Turning Applications METIC Innovative Grooving & Turning Solutions GrooVical Precise Grooving & Turning Applications New ange of Indexable Grooving Inserts The Groovical family
S-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
Produces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2013.12 Update B194G New positive breaker for steel Produces excellent surface finishes. PVD coated Cermet grade for steel 3025 3025 has excellent flank
VG-Cut. Complete Range of Turning Solutions INCH METRIC. Innovative Grooving & Turning Solutions
VG-Cut Complete Range of Turning Solutions INC METRIC Innovative Grooving & Turning Solutions VG-Cut Complete Range of Turning Solutions Deep Grooving, Threading, Parting Off, oring and Face Grooving VARGUS
Burrs.
g Burrs Ultra Micro Grain ALtima 52 Z4 Ultra Micro Grain Micro Grain Carbide Grade Multi plication for roughing and finishing Covers wide range of materials Wide Lineup of Neck Lengths Ideal for Die &
C-Lube Linear Way MH Linear Way H MH LWH
-Lube Linear ay M Linear ay ML -Lube Maintenance ree Series -Lube Linear ay M M long term maintenance free supported! Te aquamarine end plate is te symbol of maintenance free. Identification umber and
Performance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
External Holders. C1 to C36. External. Holders. SEC-External Tool Holder Series... C2. SEC-External Tool Identification Table... C4.
1 to 36 E- ool Holder eries... 2 Insert N Applicale Insert N Applicale Insert -EX ool N Applicale Insert N Applicale Insert N Applicale Insert N Applicale Insert E- ool Identiication ale... 4 E-oule lamp
M.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
Turning Tools Catalogue. Special Tools
Turning Tools Catalogue Special Tools Special Tools 2 11 15 Multi3 Cut Multi3 Cut F External radial holder 2 Multi3 Cut F External axial holder 3 Blanks for Multi3 Cut F 4 Multi3 Cut External radial holder
Carbide Cutting Tool Specials
Valid until 19/12/2011 All prices are exclusive of VAT. Carriage may be extra Carbide Cutting Tool Specials 2011 Part off Blocks, Blades & Inserts interchangeable with GTN LGIH-Line LGIH 26-3S Blades new
New wiper insert series for advanced turning operations
TurnLine Tungaloy Report No. 434-G FW & SW New wiper insert series or advanced turning operations 2 FW & SW TurnLine Only al te surace rougness even at doubled eed rate compared to regular ISO insert witout
TOOLS NEWS. Innovative insert clamping offers stability and reliability when drilling small holes. B167G. Changeable Carbide Insert Type Drill.
TOOLS NEWS 2012.11 Update B167G Changeable Carbide Insert Type Drill WSTAR Drill Series expansion Size Innovative insert clamping offers stability and reliability when drilling small holes. y Diameter
RM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money
Multi Functional Shoulder Milling Tool for Higher Productivity High Quality True perpendicular shouldering operation Excellent Productivity Strong thick insert and 3-face clamping for stable milling even
TOOLS NEWS B194H PVD coated Cermet grade for steel MP3025. Produces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2014.01 B194H Produces excellent surface finishes. PVD coated Cermet grade for steel PVD coated Cermet grade for steel 3025 3025 3025 has excellent flank
A revolution in stainless steel turning
ISO Insert Series for Stainless Steel Turning TOOLS NEWS A revolution in stainless steel turning Excellent resistance to notch wear and with good burr control. Long tool life achieved due to high plastic
KRABY LIFT UP OPENING SYSTEMS FOR FLAP AND DROP DOWN DOORS
OPEIG SYSTEMS FOR SYMBOLS AD FIISHES LEGED SYMBOLS = SHELF SAFELY LOCKED DURIG TRASPORT AD AT HOME. LOCK = ATI-TUROVER LOCKIG SYSTEM = ORMS / PATETS = PHILLIPS / POZIDRIV = EWTO = PART.O = HEXAGOAL SOCKET
MHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
Grooving and Cut-Off.
Grooving Application Guide...........................................................D2 D3 Grades and Grade Descriptions.......................................................D4 D7 A2 Cut-Off................................................................D8
MANN+HUMMEL Fuel filters
MANN+HUMML Fuel filters 65 Application areas for MANN+HUMML fuel filters Te rapid development of diesel tecnology as made te filtration of diesel fuel before it reaces te injection system a top priority.
STERILE CONTAINER SYSTEMS
BASKET MADE FROM STAINLESS STEEL WIRE MESH WIRE BASKET WITH LID TK3-1010 TK3-1011 TK3-1012 TK3-1013 540 x 250 =35 mm 540 x 250 =55 mm 540 x 250 =75 mm 540 x 250 =105 mm TK3-1020 TK3-1021 TK3-1022 TK3-1023
M.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
A New T-BURST Holder for Swiss Turning Applications
1/15 A New T-BURST Holder or Swiss Turning Applications 2/15 KEY POINT TaeguTec is pleased to introduce a new addition to te T-BURST ig pressure coolant older or swiss turning applications. Te T-BURST
SA SyStem. NeW. Part-off and grooving system for radial grooving. high positive inserts for aluminium self-clamping blades.
SA SyStem Part-off and grooving system for radial grooving NeW high positive inserts for aluminium self-clamping blades www.arno.de 01/2013 Content Content SA-Monoblock holder... Page 4 9 SA-Blades...
TOOLS NEWS Update B194B. PVD coated Cermet grade for steel MP3025. Series Expansion. For excellent surface finishes and extended tool life.
Series Expansion TOOLS NEWS 2012.10 Update B194B PVD coated Cermet grade for steel For excellent surface finishes and extended tool life. PVD coated Cermet grade for steel Better tool life when machining
PRODUCT CATALOG MAIN INDEX
PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre
C-Lube Linear Roller Way Super MX Linear Roller Way Super X
-Lube Linear Roller ay uper Linear Roller ay uper X 14 148 Aquamarine endplate for identification of -Lube Linear ay Identifi cation number and specifi cation Te specification of and series are identified
REPAIR PARTS ROBJETSU. Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT
REPAIR PARTS ROBJETSU Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT Index JETS J03, J05, J03N, J05N...3 JS...4 JL07N, JL0N...5 GH...6 Primeflow...7 XSH...8 VA...9 SUBMERSIBLES E... 0 4" High
DFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
KENNAMETAL HERTEL FIX-PERFECT
KENNAMETAL HERTEL Contents Inserts Key to identification numers E 2 Summary of inserts E 3 Summary of chipreakers E 4 Summary of cutting grades E 6 Appication notes E 7 Inserts E 10 Bade toos Key to identification
B250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
T5100 SERIES. For a wide range of cast iron turning applications. Keeping the Customer First. CVD Coated Grade for Grey and Ductile Cast Iron Turning
Keeping the Cusmer First Tungaloy Report No. 359-E CVD Coated Grade for Grey and Ductile Cast Iron Turning T50 SERIES For a wide range of cast iron turning applications T50 SERIES Drastically improved
KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
Preview Edition: M370 ADVANCES 2014
Preview Edition: M370 ADVANCES 2014 TURNING SOLID END MILLING INDEXABLE MILLING TOOLING SYSTEMS METRIC High-Feed Applications M370 Series Designed for high feed rate productivity, M370 Series provides
ISOTURN TOOLS. SSBCR/L 75 Lead Angle Screw Lock Tools Carrying the Square Inserts with 7 Clearance Angle
BCR/L 75 Lea Ange cew Lock Toos Caying te quae Insets wit Ceaance Ange 2 1 b 75 Rigt-an sown Designation b 1 2 Ga G Inset BCR/L 1616H-09 16.0 16.0 100.00 15.0 13.0 0 0 C.. 09T3 R 16-236 T-15/5 BCR/L 2020K-12
PRODUCT CATALOG MAIN INDEX
ROUCT CATAOG MAIN INEX Contents ages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide rills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 SS Tool Bits, End Mills & Centre rills
Threading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
EXCLUSIVELY AVAILABLE AT KAR IN CANADA
XLUSIVLY VILL T R I PS Series Universal - Plain ack ounting Semi-Steel ody, 3-aw Self-entering s wit 2-Piece ard Reversible aws edium duty 3 pinion design ac cuck is provided wit: 1 set of ard master jaws
Crossed Roller Slides
Crossed Roller Slides ov-crossed-slides-divider - Updated - 18-09-2017 165 Linear Linear Rail Sets Overview Standard cross roller rail sets L1000 & L1001 Seven rail profiles (Sizes 1-12) Lengts: 20mm to
AQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
Super Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E
Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened
6 5 f2 L7. ØD1j6 ØD12 L21. 2 Model L-Series V-Series
L8 f3 V Series & L Series ØD6 ØD j6 ØD6 L3 L8 f3 ØD1j6 B0 C0 G0 H0 ØD j6 0 3 9 1 1 L D0 J0 ØD1j6 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio Applies to models B0,
Drills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
For Extra Large Pitches METRIC
or Extra arge Pitches METRIC or Extra arge Pitches Up to 25mm or 1 tpi Unique Design for Heavy Duty Applications VKX Vargus Tough Submicron Grade Inserts Anti-Rotation Stopper Toolholder Support Suited
and 2013 Beyond Inserts
INNOVATIONS Innovations MASTER Master Catalogue CATALOGUE A4 CUTTING Tooling TOOLS and 2013 Beyond Inserts 2013 A4 Tooling and Beyond Inserts for All Your O.D. and I.D. Applications Primary Application
Class Quality Module Total Tooth Thickness Max. Feed Force per Applications (Examples) Pitch Tolerance Length Pinion Contact/
Overview of Integrated Rack 90 Arrangement 180 Arrangement Adjusting between rack and rai not necessary Space-saving and performance-optimized design can be reaized Different types of integrated racks
FS/LS MS/RS. The new high Al-rich (Al,Ti)N single layer coating significantly reduces edge fracturing.
TOOL NEW IO Turning Inserts for Difficult-to-cut Materials 2018.6 Update B214G Item Expansion The new high Al-rich (Al,Ti)N single layer coating significantly reduces edge fracturing. MP9005 MP9015 MT9005
TR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
V Series. For more information, call us toll-free at 888-GAM-7117 Visit for 2-D and 3-D Drawings
V Series L3 B0 G0 ØD4 f7 ØD6 L6 L6 L8 f3 f1 2 ØD3 4 C0 H0 6 5 f2 L7 ØD2 j6 0 3 9 1 1 L4 D0 J0 ØD1j6 f4 ØD12 ØD13 f7 60 Major Dimensions (Applies to all models) Input Dimensions that change based on ratio