Section 12 Contents. Product Reference Numbers and Ordering Information 12.10
|
|
- Vernon Rogers
- 6 years ago
- Views:
Transcription
1 Section 12 Contents DESCRIPTION Product Reference Numbers and Ordering Information PGE NUMER Technical Details Head Shapes vailable Finishes vailable Camlock Fixing Methods Explaining Keying Details Technical Details arrels and Key Series Key Movements Key Series - Up to 1000 Combinations Key Series Combinations and Greater Key Combinations for Electrical Control Cabinets Removable arrel System Technical - Cams Cams and Mini Cams Standard Range of Cams Cams for Radial Pin Tumbler Camlocks Cams for Handles 2 Point, 3 Point and Caulking Cams Cams and ccessories for IP Rated Products Technical - Handles Handle Movements Spindle Details ccessories Plastic Key Covers, Caps, Washers and Gaskets udget Key, Spring Clips and Extension Rosette, Plate and Weather Shields Striking Plates, Multi Drawer Fittings and Threaded Extensions Espagnolet Lock ccessories lphabetical Index MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 21/08/ /1
2 Product Reference Numbers & Ordering Information Camlocks 20.0mm FIFTH NUMER M = MSTERED LOCK: = 5 NON MSTERED LOCK: = X Ø22 Ø24,8 SIXTH NUMER KEY MOVEMENT TO UNLOCK REFER TO PRODUCT PGE FOR LOCK MOVEMENT SEE FOR DETILS 20 ROUND HED 5 4,3 CONICL HED Ø19,1 MIN SEVENTH ND EIGHTH NUMER FINISHES VILLE REFER TO PRODUCT PGE FOR LOCK FINISH SEE FOR DETILS 16,6 MIN FIXING HOLE SIZE KEY SERIES 92 FS E PRODUCT REFERENCE NUMERS COM- INTIONS NUT FIXED HOUSING STNDRD VERSION 1336 (1375) (2724) 1436 (1475) (4775) M = MSTER KEY SYSTEM: SUPPLIED TO ORDER ONLY STNDRD MOVEMENTS: 1, 2, 3, 4, 5, 6, 7 HORSESHOE CLIP FIXING 1337 (1376) 1437 (1476) (4776) STNDRD FINISHES: RIGHT CHROME STINLESS STEEL CP REF. No.s IN ( ) REFER TO LOCKS WITH CONICL HED ND RE VILLE IN CHROME FINISH ONLY PLESE SPECIFY THE FOLLOWING DETILS WHEN ORDERING:- Product Finish. For Locking Devices:- Key Movement (unless handle, knob or cam movement is specified, see below). If lock is keyed to Differ or to Pass. If the Differ Number is marked on arrel Cap. If the lock is to be Mastered. For Handles & Knobs:- Handle or Knob movement. Spindle Details. For Products with Cams:- Cam movement. Cam Reference Number or Cam Dimensions. Cam Position when locked, indicating where appropriate Direction of Crank, Notch Position, Dimension and Dimension X. For Snap-In Fixed Products:- Panel thickness. MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 21/08/
3 Technical HED SHPES SHOWN IN CTLOGUE ROUND CONICL CYLINDRICL SQURE RECTNGULR METHODS OF FIXING CMLOCKS METL/PLSTIC FSTEST FIXING NUT FIXING (For max. 28mm panels) HORSESHOE CLIP (For max. 25mm panels) SNP-IN (For 0,6 to 1,82mm panels) KEYED TO PSS: ll locks have same key number ( Differ number), with one key opening all. KEYED TO DIFFER: ll locks have different key numbers ( Differ number), each lock requiring own key to open. NOTE: Locks can also be supplied keyed in sets to pass - each set to differ. This arrangement caters for offices / hospital rooms where all units in a given room will operate one key number, but differ from adjoining rooms. D.N.O.C.: (Differ number on cap) will result in the key number being stamped on the lock front (cap). This assists in obtaining replacement keys if they are lost. ll the above Lowe & Fletcher services are available at no extra cost. MSTERING: Is available at extra cost. EXPLINING KEYING DETILS MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 21/08/
4 Technical-arrels & Key Series RRELS Disc tumbler locking barrels can be sold separately or as part of a locking device. wide range of barrels are available, some of which are shown in section 10. Disc tumbler locking barrels are made in die-cast zinc alloy, which can be passivated on request and also greased to prevent corrosion. Disc tumblers are made from brass or passivated steel and their springs are made of phosphor bronze or stainless steel. stainless steel cap is normally fitted in the front of the barrel and the key number can be stamped on the cap if requested. For special purposes, chrome-plated or nickel-plated barrels can be supplied. KEYS Two robust nickel-plated steel keys are supplied as standard with each lock. The key number is stamped on each key. Extra keys can be supplied on request. Single-entry keys can only be inserted into the lock one way up, while double-entry keys can be inserted either way up. Double-entry keys are particularly useful for outside applications where darkness prevents the user from seeing the keyhole. DUST COVERS Many of our locks can be supplied with spring-loaded stainless steel dust covers, which prevent dust and rain from entering the lock. This is particularly useful for outside applications. KEY MOVEMENTS TO UNLOCK KEY FREE POSITION SHOWN Y 90º 90º 180º 180º 90º º 360º 90º 90º REFER TO PRODUCT PGE FOR CTUL KEY MOVEMENTS NON STNDRD MOVEMENT - REFER TO SLES MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: /01/97
5 Technical - Key Series THE MOST COMMON KEY SERIES S USED IN THIS CTLOGUE RE SHOWN ELOW. DETILS OF RREL DIMENSIONS RE SHOWN IN SECTION 10 FFE SERIES DESCRIPTION : 5 DISC SINGLE ENTRY COMINTIONS : 4 NUMERS : FFE 3, 8, 17, 31 H SERIES DESCRIPTION : 4 DISC DOULE ENTRY COMINTIONS : 50 NUMERS : H500 - H550. FS SERIES DESCRIPTION : 5 DISC SINGLE ENTRY COMINTIONS : 80 NUMERS : FS 876-FS 955 1F SERIES DESCRIPTION : 5 DISC DOULE ENTRY COMINTIONS : 200 NUMERS : 1F001-1F200. MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: FH SERIES DESCRIPTION : 5 DISC DOULE ENTRY COMINTIONS : 200 NUMERS : FH001 - FH SERIES DESCRIPTION : 5 DISC DOULE ENTRY COMINTIONS : 200 NUMERS : SERIES DESCRIPTION : 5 DISC SINGLE ENTRY COMINTIONS : 200 NUMERS : C.E.Y.Z. SERIES DESCRIPTION : SINGLE ENTRY COMINTIONS : SEE PGE NUMERS : SEE PGE SERIES DESCRIPTION : 5 DISC DOULE ENTRY COMINTIONS : 200 NUMERS : D SERIES DESCRIPTION : 5 DISC SINGLE ENTRY COMINTIONS : 200 NUMERS : 2D001-2D200 93E SERIES DESCRIPTION : 5 DISC DOULE ENTRY COMINTIONS : 500 NUMERS : /10/
6 Technical - Key Series THE MOST COMMON KEY SERIES S USED IN THIS CTLOGUE RE SHOWN ELOW. DETILS OF RREL DIMENSIONS RE SHOWN IN SECTION SERIES DESCRIPTION MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: SERIES DESCRIPTION : 5 DISC DOULE ENTRY COMINTIONS : 500 NUMERS : : 6 DISC DOULE ENTRY Removable arrel System COMINTIONS : 500 NUMERS : SERIES DESCRIPTION : 7 DISC DOULE ENTRY COMINTIONS : 1000 NUMERS : SERIES DESCRIPTION : 6 DISC DOULE ENTRY COMINTIONS : 1000 NUMERS : SERIES DESCRIPTION : 8 DISC DOULE ENTRY COMINTIONS : 1200 NUMERS : SERIES DESCRIPTION : 7 DISC DOULE ENTRY COMINTIONS : 2000 NUMERS : SERIES DESCRIPTION : 8 DISC DOULE ENTRY COMINTIONS : 2000 NUMERS : SERIES DESCRIPTION : 7 DISC DOULE ENTRY COMINTIONS : 2000 NUMERS : SERIES DESCRIPTION : 10 DISC SINGLE ENTRY COMINTIONS : 2000 NUMERS : SERIES DESCRIPTION : 10 DISC DOULE ENTRY COMINTIONS : 2000 NUMERS : Z, ZC, ZE, ZF, ZG, ZL DESCRIPTION : 7 LEVER LOCK COMINTIONS : 1800/2000 NUMERS : VRIOUS /04/03
7 Technical - Key Series THE MOST COMMON KEY SERIES S USED IN THIS CTLOGUE RE SHOWN ELOW. DETILS OF RREL DIMENSIONS RE SHOWN IN SECTION SERIES DESCRIPTION : 4 PIN INLINE COMINTIONS : 690 NUMERS : SERIES DESCRIPTION : 5 PIN INLINE COMINTIONS : 3200 NUMERS : MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 37 SERIES DESCRIPTION : RDIL PIN TUMLER COMINTIONS : NON-MSTERED NUMERS : SERIES DESCRIPTION : RDIL PIN TUMLER COMINTIONS : MSTERED NUMERS : SERIES DESCRIPTION : RDIL PIN TUMLER COMINTIONS : NON-MSTERED NUMERS : SERIES DESCRIPTION : 7 LEVER LOCK COMINTIONS : 6000 NON MSTERED NUMERS : SERIES DESCRIPTION : 7 LEVER LOCK COMINTIONS : 1000 MSTERED NUMERS : SERIES DESCRIPTION : 7 LEVER SFE LOCK COMINTIONS : 4050 NUMERS : SERIES DESCRIPTION : 7 LEVER LOCK COMINTIONS : 2000 NON MSTERED NUMERS : SERIES DESCRIPTION : 7 LEVER LOCK COMINTIONS : NUMERS : SERIES DESCRIPTION : 7 LEVER LOCK COMINTIONS : 1600 NUMERS : SR1 SERIES DESCRIPTION : 8 LEVER DOULE ITTED COMINTIONS : NUMERS : S00001-S /01/
8 Technical-key combinations for electrical control cabinets PROFILE & E C241 PROFILE C, Y & Z PROFILE C PROFILE Y F900 PROFILE Z EDF1300 EDF1400 THIS LIST IS NOT COMPREHENSIVE, FOR OTHER KEY COMINTIONS PLESE CONSULT US. MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: /11/04
9 Technical - Removable arrel Procedure 35 Series Products Only RREL INSERTION Insertion may be achieved with either the servant key, the removal key OR no key fitted into the barrel. Insertion can only be achieved when the product is in the unlocked position. RREL REMOVL Removal can only be achieved when the product is in the unlocked position (orientation marks are aligned) ND the removal key is inserted. PROCEDURE lign orientation marks located on barrel and housing front faces. (See below.) Push barrel fully home into the housing. (Front face of barrel and housing should then be flush). If fitting with the removal key, hold barrel in place to remove key. Product should now function as a standard lock with the servant key. PROCEDURE Turn the barrel to the unlocked position using the servant key. Orientation marks should now be aligned. (See below.) Remove servant key. Insert removal key fully into barrel. Withdrawal of the removal key will now also remove the barrel. LOCK MOVEMENT ORIENTTION MRK POSITION FOR RREL INSERTION/REMOVL HOUSING RREL LOCKED 03 ND Þ CLOCKWISE OR 180Þ NTICLOCKWISE UNLOCKED ORIENTTION MRK LOCKED 08 90Þ CLOCKWISE UNLOCKED ORIENTTION MRK LOCKED 09 90Þ NTICLOCKWISE UNLOCKED ORIENTTION MRK MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 19/03/
10 Standard Finishes 7TH DIGIT 8TH DIGIT FINISH 0 NTURL FINISHES C D E F G SELF COLOUR SELF COLOUR - SHOT LST SELF COLOUR - VIRTE SELF COLOUR - POLISH SELF COLOUR LUED LUED ND OILED 1 POWDER COT ND PINTED C D E F G WHITE PPC (RL9010) LCK PPC (RL9005) EIGE EPC ROWN EPC (0829) SILVER PPC GOLD PPC GREY (EL) 2 CHROME FINISHES 4 OTHER FINISHES C D C D E F J M N R V W G H RIGHT CHROME (CONDITION 1) LCK CHROME STIN CHROME RIGHT CHROME (CONDITION 2) STINLESS STEEL CP PLSTIC DRK ROWN LIGHT ROWN LUE GREY GREY - NEW YELLOW MROON LCK RED GREEN WHITE CHEMICL LCK CHEMICL LCK, DRY 6 ZINC PLTE ND PSSIVTE C D E N V F P Q G ZINC ND YELLOW ZINC ND CLER (OR LUE) ZINC ND YELLOW ND P100 ZINC ND DRCROMET ZINC ND YELLOW (13 MICRON) ZINC ND LCK PSSIVTION ZINC ND OLIVE DR PSSIVTION ZINC, YELLOW ND OIL YELLOW PSSIVTE ND SE METL CLER PSSIVTION ON SE METL GLVNISE 7 NICKEL 8 ELECTROPHERITIC LQUER 9 OTHER METLIC FINISHES S D C D E F C D RIGHT NICKEL RREL NICKEL STIN NICKEL RUSHED NICKEL POLISHED OLD RSS (919) DWN GOLD ( P/C/N/CL) DWN GOLD ( P/CL) DWN GOLD ( V/CL) POLISHED RSS (L301-P/) POLISHED RSS (L301-V/) GOLD PLTE RSS PLTE SILVER PLTE NTIQUE GOLD MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: /08/00
11 Technical - Cams CMS large range of cams are available. Cams can be straight, 45 0 cranked or 90 0 cranked. Cams can also be notched on either edge as required. Cams can be fitted at 3, 6, 9 or 12 o clock as shown. Please specify following details when ordering 1 For all cams: (a) Cam reference, if known. (b) Cam position, when locked. (c) Dimension. CM POSITION 2 For cranked cams: (d) Whether cranked towards head or away from head. (e) Dimension. (alternatively please quote dimension X). 3 For notched cams when viewed from front of lock: (f) If fitted at 6 or 12 o clock specify whether notch is on Left or Right hand side. (g) If fitted at 3 or 9 o clock specify whether notch faces upwards or downward. CM MOVEMENTS EXMPLE 12 O/C 9 O/C 3 O/C DIMENSION X X 6 O/C CHOOSE CM POSITION WHEN LOCKED (VIEW FROM FRONT) X MOVEMENTS CM MOVEMENTS TO LOCK/UNLOCK CORRESPOND TO THE KEY MOVEMENTS LISTED ON X X DIMENSION IS THE DISTNCE ETWEEN THE UNDER- SIDE OF LOCK HED ND INSIDE FCE OF THE CM IS DIMENSION TO E SPECIFIED ON CM NUMER SEE LENGTH OF HOUSING LENGTH OF HOUSING LENGTH OF HOUSING DIMENSION DIMENSION - IS THE WORKING LENGTH OF CM MESURED FROM CENTRE OF LOCK. N.. WITH NOTCHED CM STTE NOTCHED - LEFT (SHOWN) OR NOTCHED - RIGHT. MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 00/07/
12 Technical-Standard Cams & Mini Cams (Not special handles, IP Rated and Radial Pin Tumbler Locks) UNDERSTNDING THE 7 FIGURE CM REFERENCE 1st NUMER 2nd NUMER 3rd NUMER 4th & 5th NUMERS 6th & 7th NUMERS CM PIERCING CM THICKNESS SHPE DIMENSION IN 0.4mm INCREMENTS SEE TLE ELOW DIMENSION IN MILLIMETRES (mm) 6 = 8 mm sq 1. FOR STNDRD CMLOCKS 2=2mm 3=3mm > 6mm MOUNT OF CRNK < 6mm W W 20 M CMS ONLY IF DIFFERENT WE WILL SPECIFY 4th & 5th No.s SIZE IN mm CM TYPE W = mm M = Ø M T Ø9.2 2=2mm 2mm THICK 20 mm FOR MINI CMLOCKS 6,4 mm T = 6.5 mm sq 3 mm NOT VILLE FOR MINI ND T CMS EXMPLE: CM STR PIERCED 2mm CRNKED = 20mm = 6.4mm CRNK FOR OFFICE FURNITURE & SOME CMLOCKS NOT LL CM VRITIONS MY E VILLE, REFER TO PGES MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: /03/99
13 Technical-Standard Cams STRIGHT CMS - 2mm THICK 90 0 CRNKED CMS - 2mm THICK 15,5 DIM PRODUCT REF. No. DIM DIM PRODUCT REF. No. 7,62 STRIGHT CMS - 3mm THICK 15, DIM PRODUCT REF. No ,7 15,5 7, ,62 STRIGHT NOTCHED CMS - 2mm THICK 7,62 15,5 4, ,5 DIM PRODUCT REF. No CRNKED & NOTCHED CMS - 2mm THICK 15, ,7 DIM DIM PRODUCT REF. No MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 01/04/
14 Technical-Cams for Radial Pin Tumbler locks LOCKING CMS FOR USE WITH RDIL PIN TUMLER CM LOCKS. STNDRD THICKNESS 3MM - STNDRD FINISH ZINC PLTED PRT No. DIM 15, ,5 5,3 6,5 6, ,3 44,5 35,0 15,5 4,8 3,0 4, RETINER PRT. No TWO-POINT CM PRT. No FURTHER SELECTION OF CMS IS VILLE ON REQUEST 5,0 9,5 19,0 8,0 PRT No DIM 22,2 34,0 41,3 15,5 3,0 3,0 8,0 63,5 35,0 16, ,1 4,8 RETINER PRT. No THREE-POINT CM PRT. No ,5 15,5 19,0 PRT No DIM ,5 R9,5 10,3 6,5 R9,5 10,3 10,0 8,0 6,0 PRT No DIM.. 3,2 3,2 3,2 3,2 3,2 3,2 2,4 2,4 2,4 2,4 2,4 2,4 4,5 4,5 4,5 4,5 4,5 4,5 6,0 6,0 7,8 DIM ,5 28, ,8 20, , PRT No DIM.. 2,4 2,4 2,4 2,4 2,4 2,4 4,5 4,5 10,5 10,5 10,5 10,5 7,8 7, ,2 3,2 3,2 DIM ,5 22, ,5 34, ,5 6,5 8,0 PRT No ,5 R9,5 10,3 DIM.. 14,5 14,5 14,5 14, DIM MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: /10/00
15 Technical-Cams for Handles (Not suitable for handles with 8mm sq. spindle or IP.65 Rated) 2-POINT CMS STRLOCK FIXING WSHERS VILLE 16 3,5 16 3, Ø4,5 Ø4, POINT CMS 16 3,5 16 3, Ø4,5 65 Ø4, ,5 16 3, Ø4, Ø4, STRLOCK FIXING WSHERS VILLE 5165 STRLOCK FIXING WSHERS VILLE MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 22/10/
16 Technical-2 Point, 3 Point and Caulking Cams 2-POINT CMS 3-POINT CMS DRIVE CM 15,5 4,8 15,9 Ø4, Ø4,5 8 Ø4,8 PRT No FOR M8 SPINDLE ON HNDLES WITH STUMPS PRT No WITHOUT STUMPS PRT No CULKING CMS 35 44,5 We have a range of special cams cranked towards, or away from, the handle. Details available on request. For large quantity orders a special cam can be produced to suit customers requirements RETINING PLTE PRT No ,8 DIMENSION RETINING PLTES 15,9 5,2 15,9 5,2 11 Ø4,5 R25,4 18,2 47, ,5 20,3 12,7 6,8 20 LL CMS SUPPLIED TO DIM TOLERNCE ± 1.0mm 2 3,5 Ø5,2 No FOR USE WITH CMLOCKS ND HNDLES No No FOR USE ONLY WITH HNDLES MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: /07/94
17 Technical-Cams & ccessories for IP Rated Locks CMS DIM X DIM 18, ,00 REF 16,1 4,00 PRODUCT REFERENCE NUMERS DIM X DIM PRT NUMER NOTE: DIMENSIONS X IS IDENTICL WHEN CM IS USED ON PRODUCTS 0011, 0012, 0013, 0014, 0021, 0022, 0023, 0024 OR 0025 NOT SUITLE FOR 2609 KEYS FOR SPNNER LOCKS R42+0,2 32+0,3 R14+0,2 R5 Ø9 32+0,3 13,5 90±0,5 22,8+0,2 36+0,3 Ø13,3 8 TRINGULR 7 SQURE DOULE R DOULE R KEY FOR MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: KEY FOR KEY FOR KEY FOR /04/
18 Technical - Handles HNDLE MOVEMENTS 1 CLOCKWISE NTI-CLOCKWISE CLOCKWISE NTI-CLOCKWISE MOVEMENT RE LE RE LE LE RE LE RE TO UNLOCK HNDLES TURN KEY NTI-CLOCKWISE RE = RIGHT EDGE OF DOOR VIEWS RE SHOWN LOOKING ON FRONT FCE OF HNDLE LE = LEFT EDGE OF DOOR SPINDLE DT FOR LL HNDLES WITH 8MM SQURE SPINDLE SPINDLE DESIGNTION mm ± 1,0 Lmm FULL THRED MTERIL 8mm SQURE RIGHT DRWN MILD STEEL R EXMPLE PRT No. FOR 8mm PLIN SPINDLES COMMENCING PRT No. FOR M8 THREDED SPINDLES PRT No. FOR M10 THREDED SPINDLES rd ND 4th DIGITS WILL INDICTE LENGTH OF FULL THRED REQUIRED, TO MXIMUM OF 99mm (IN THE CSE OF PLIN SPINDLES THIS WILL RED O ) 5th, 6th ND 7th DIGITS WILL INDICTE LNK LENGTH OF SPINDLE THRED S REQUIRED M8 OR M10 FOR 8mm SQURE MTERIL 12 NOM Xmm ± 0,2 DIMENSION X=+2 EXMPLE INDICTES N 8mm THREDED SPINDLE WITH LNK LENGTH OF 70mm ND 50mm OF FULL THRED SPINDLE LNK LENGTH MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 11/12/
19 ccessories PLSTIC CP PRODUCT No WSHER PRODUCT No ,00 10,20 33,75 1,2 Ø24,00 55,00 16,20 7,10 13,20 ONLY FOR CMLOCKS WITH FIXING HOLE SIZE Ø16,2 x 13,2mm 19,30 16, ,6 WE RECOMMEND THE USE OF WSHER WHEN FITTING LOCK IN WOODEN PNELS WSHER PRODUCT No GSKET FOR HNDLES PRODUCT No ,00 Ø33,75 1,2 0,79 11,00 19,30 Ø58,00 41,00 CTRS. R 77 16,75 R4,00 4 POSITIONS Ø22,50 8,00 FOR GENERL HNDLE PRODUCTS MTERIL: NEOPRENE GSKET FOR HNDLES PRODUCT No ,0 Ø25,0 50,0 2 HOLES Ø11,0 Ø76,0 FOR 1616 GRGE DOOR HNDLE ONLY MTERIL: PLIN EXPNDED E.P.D.M. CLOSED CELL SPONGE MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 01/04/
20 ccessories UDGET KEY PRODUCT No UDGET LOCK KEY PRODUCT No D 82,0 NOMINL R6,0 FOR USE WITH 2401, 4282, 4283, 4284, 4285, 5500 FOR USE WITH 5505 SPRING CLIP PRODUCT No SPRING CLIP PRODUCT No FOR USE WITH 4303 ND RPT LOCKS FOR USE WITH 5804/5806 SPRING CLIP PRODUCT No SPRING CLIP PRODUCT No FOR USE WITH 5804/5806 LTERNTIVE CLIPS VILLE FOR USE WITH 4333 & 5500 SNP-IN EXTENSION PRODUCT No RSS INSERT PRODUCT No ,0 18,0 34,0 FOR USE WITH 4333 ND 5500 FOR USE WITH 4339 MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: WE SITE: /11/00
21 ccessories ROSETTE PRODUCT No ROSETTE PRODUCT No FOR USE WITH 4282, 4360, 5860 ND 5861 FOR USE WITH 4286, 4362 ND WOODEN OFFICE FURNITURE LOCKS WITH Ø 19.0mm NOZZLE. ROSETTE PRODUCT No PLTE Ø20,1mm 31 Ø3mm 17,2 FOR USE WITH WOODEN OFFICE FURNITURE LOCKS WITH Ø mm NOZZLE. WETHER SHIELD PRODUCT No WETHER SHIELD PRODUCT No ,0 Ø 19,0 16,0 Ø 19,0 42,0 Ø28,0 82,0 70,0 FINGER PULL TYPE WETHERSHIELD PLIN TYPE WETHERSHIELD WETHER SHIELD PRODUCT No WETHER SHIELD PRODUCT No ,0 Ø 22,0 16,0 Ø 22,0 42,0 Ø28,0 FINGER PULL TYPE WETHERSHIELD PLIN TYPE WETHERSHIELD MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: WE SITE: 01/04/
22 ccessories THREDED EXTENSIONS EXTERNL/INTERNL THREDED EXTENSIONS DESIGNED TO CUSTOMER REQUIREMENTS STRIKING PLTE PRODUCT No ,00 1,25 40,00 5,5 FOR USE WITH 5833 ND ,00 22,00 2 HOLES Ø4,8 C KS Ø7,5x90 0 INCL MULTI-DRWER FITTINGS TYPICL LOCK ND LOCKING R PPLICTION LOCKING RS FOR USE WITH PEDESTL LOCKS IN SECTION 4 DJUSTLE PEGS SDDLE X 3 Ø6 LOCKING R PEGS - RIVETTED DIM.X 13mm 20mm 25mm 8,5mm 10mm 7,5mm 19mm 26mm 30mm 3,5mm 16mm 5,5mm 22mm 45mm 2,5mm LOCKING R PEGS - THREDED DIM.X 7mm 10mm 13mm 16mm 20mm 26mm 32mm 45mm 38mm 12mm 5,5mm 22,5mm 29,5mm 18mm LOCKING RS RE MDE TO INDIVIDUL CUSTOMER REQUIREMENTS ONLY. FOR QUOTTIONS PLESE SEND DETILED DRWING TO OUR SLES OFFICE. MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: /03/98
23 Espagnolet ccessories HOOK SSEMLY TOP 19,0 13,0 19,0 PRODUCT No. Ø 3,3 22,0 30, RIGHT NICKEL PLTE LCK CHROME 3,0 11,0 HOOK SSEMLY OTTOM 19,0 PRODUCT No. 13,0 Ø 3,3 22,0 30, RIGHT NICKEL PLTE LCK CHROME 11,0 3,0 19,0 NCHOR PLTE PRODUCT No. Ø 7,5 14,5 3, RIGHT NICKEL PLTE LCK CHROME Ø 3.3 ROD GUIDE PRODUCT No. 13,0 7,0 Ø 6,4 (Ø 7.4) Ø 2,8 22,0 30, RIGHT NICKEL PLTE LCK CHROME 3,0 11,0 ROD PRODUCT No. LENGTH 4,8 FLT RIGHT NICKEL PLTE LENGTH TO CUSTOMER REQUIREMENT MX 2000mm SUPPLIED WITH PVC SLEEVE FOR LCK FINISH. Ø 5,8 FIXING SCREWS - TWINSTRT POZIDRIVE WOODSCREW (2 PER SSEMLY) PRODUCT No ,7 RECOMMENDED PILOT HOLE SIZE: HRDWOODS ND HIGH DENSITY ORDS Ø 2.5 X 7.2 DEEP SOFT WOODS ND LOW DENSITY ORDS Ø 1.8 X 7.2 DEEP FIXING SCREWS - POZIDRIVE SCREW PRESS IN DOWEL (2 OFF ECH PER SSEMLY) PRODUCT No. PRODUCT No. POZIDRIVE SCREW Ø 8,5 8,0 PRESS IN DOWEL RECOMMENDED HOLE SIZE - Ø 8.0 X 8.0 DEEP MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 16/03/
24 ccessory Kit NICKEL PLTE LCK CHROME NCHOR PLTE Multi-Point Lock ccessories LTCH SSEMLY RIGHT HND, LEFT HND 7,0 24,0 12,0 HOOK SSEMLY (TOP) 65,0 38,0 Ø 3,5 20,0 24,0 20,0 ROD GUIDE 5,0 16,0 30,0 38,0 25,0 25,0 16,0 25,5 6, LTCH PLTE 7,0 Ø 3, CTUTOR R GUIDE (LCK NYLON) CTUTOR R GUIDE (NIKEL PLTE DIECST) Ø 3,5 5,0 17,0 17,0 ROD GUIDE 7008XXX - CTUTOR R ROD (SUPPLIED WITH PVC SLEEVE FOR LCK FINISH) OPTIONL PEG POSITION LENGTH TO CUSTOMER REQUIREMENTS Ø 4,0 2,0 10,0 HOOK SSEMLY (OTTOM) 5,0 5,0 7008XXX - CRNKED CTUTOR R 18,5 13,5 2,0 7,0 NCHOR PLTE 5,0 LENGTH TO CUSTOMER REQUIREMENTS 10,0 REFER TO SECTION FOR INDIVIDUL PRT NUMERS ND DIMENSIONS MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: /04/03
25 lphabetical Index PRODUCT SECTION NUMER PRODUCT SECTION NUMER 3 Point Latch System for IP65 Rated Products Lever Dead olt Rim Locks Lever Safe Lock Lever spring olt Rim Locks...7 ccessories...12 ccessories for Keyswitches...9 arrels arrels (Technical Information) rass Padlocks... 7 udget Lock Keys udget Locks...6 Cabinet Handles... 3 Cam Details...12 Cam Movements Cam Position Camlock IPF 559 Rated... 5 Camlock with Caulking Cam... 1 Camlocks... 1 Cams Cams for Handles Cams for IP65 Rated Products Cams for Pin Tumbler Camlocks Caulking ction Locks... 1 Caulking Spanner Locks IPF559 Rated... 5 Change Locks... 8 Clip-on Keyswitches... 9 Coin Deposit Lock Coin Lock Coin Operated udget Lock... 6 Coin/Screwdriver Operated udget Lock... 6 Combination Change Lock... 8 Cylinder Locks... 8 Dead olt Locks... 7 Dead Locks... 7 Double RPT Safe Lock... 8 Dust Covers (Technical Information) Espagnolet Lock... 4 Finger Pulls Finishes Flush Fitting Handles... 3 Garage Door Handles... 3 Gaskets Glass Sliding Door Lock... 4 Handle movements Handles... 3 Head Shapes Helical Compression Locks... 8 Helical Plunger Lock... 8 Impulsion Keyswitches... 9 In-Line Keyswitches... 9 In-Line Pin Tumbler Locks... 8 Internal Garage Door Handles... 3 IP65 Rated Devices... 5 IPF559 Rated Devices... 5 Key Combinations for Electrical Control Cabinets Key Covers Key Movements Key Series Keying Details Keys for Spanner Locks Keys (Technical Information) Keyswitches... 9 Knobs... 3 L Handle IP65 Rated... 5 L Handle IPF559 Rated... 5 L Handles... 3 Latch Locks... 2 Lever Locks... 7 Lock arrels Methods of Fixing Mini Camlocks... 1 Mini Cams Mini Handle IP65 Rated... 5 Mini Handles... 3 Mini Keyswitches... 9 Miniature Keyswitches... 9 Mortice Deadlocks... 7 Movements for Keyswitches... 9 Multi-Draw Locks... 2 Ordering Information Padlocks... 7 Pin Tumbler Locks... 8 Plastic Caps Plunger Lock... 8 Product Finishes Product Reference Numbers Radial Pin Tumbler Combination Change Lock... 8 Radial Pin Tumbler Locks... 8 Radial Pin Tumbler Safe Locks... 8 Reference Number Guide Rim Deadlocks... 7 Rim Locks... 7 Roller Tumbler Camlocks... 8 Roller Tumbler Keyswitches... 9 Roller Tumbler Locks (Magnetic Keyed)... 8 RPT Combination Change Lock... 8 RPT Keyswitches... 9 RPT Locks... 8 RPT Safe Locks... 8 Safe Locks... 7 & 8 Single RPT Safe Lock... 8 Slamlocks... 1 Sliding Door Lock... 4 Snap-on Keyswitches... 9 Spanner Locks... 5 Spanner Locks IP65 Rated... 5 Spanner Locks IPF559 Rated... 5 Special Purpose Locks Spindle Details Spring olt Locks... 7 Spring Clips Standard Cams Standard Movements for Keyswitches... 9 Switches and Switch Specification... 9 Terms of usiness T Handle IP65 Rated... 5 T Handles... 3 Technical Information Technical Information for Keyswitches... 9 Washers Waterproof Locking Devices... 5 Wing Handle IP65 Rated... 5 Wing Handles... 3 Wooden Furniture Lock... 4 Wooden Sliding Door Lock... 4 MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 21/02/
26 Lowe and Fletcher Ltd., including its Subsidiaries, ssociated and Connected Companies, is constantly developing and improving its products. ll descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifications without prior notification or public announcement. The products described herein are manufactured by the Lowe & Fletcher Group within the EEC. ll goods supplied by the company are supplied subject to the Company s General Conditions of Sale, a copy of which is available on request. MOORCROFT DRIVE, WEDNESURY, WEST MIDLNDS, ENGLND WS10 7DE. TELEPHONE: FX: E-MIL: sales@lowe-and-fletcher.co.uk WE SITE: 00/07/
Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS
Mighty Mouse Cobra TECHNICL SPECIICTIONS 0-0 triple-start with self-locking coupling nut, exploded view How To Order Mighty Mouse Cobra Plug Connector and ackshell ssemblies Sample Part Number 0-0-2 ZNU
More informationLocks and Catches Information
Information SYMO 3000 is the worldwide unique furniture locking system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum expenditure and effort. The
More informationKenstan L O C K C O M P A N Y. Strikes and Mounting Plates. Mounting Plates and Gang Lock Hardware. Ratchet Bars and Miscellaneous
Volume 5 C a t a l o g L O C K C O M P N Y ccessories 2 S V E X Face Sleeves, Collars and Spacers 1 Spacers and Washers 2 Washers and Strikes 3 Strikes and Mounting Plates 4 Mounting Plates 5 Mounting
More informationTHIS PAGE LEFT BLANK INTENTIONALLY
THIS PAGE LEFT LANK INTENTIONALLY ARREL EXCHANGE SYSTEM The housings shown on this page all share a common part: an innovative removable barrel. In seconds, and without the need for any special tools,
More informationMISCELLANEOUS INDEX PAGE DATE SERIES DESCRIPTION
MISCELLNEOUS INDEX 08/01/11 PGE DTE SERIES DESCRIPTION M-1 08/01/11 Miscellaneous Index M-2 04/16/96 M01 Tooling all M-3 04/16/96 M02 Scrap Chute Hook and Retainer racket M-4 01/03/95 M03 Scrap Chute Chain
More informationMPC COBRA SERIES. Manually Programmable Cylindrical Lock D
51120-D MPC COBRA SERIES Mnully Progrmmle Cylindricl Lock 575 Birch Street Forestville, CT 06010 technicl support: 866-322-1237 fx: 866-322-1233 http://www.irsupport.net 57010-H 12-19-2005 Introduction
More informationControl stations and enclosures Control station enclosures : insulated, metal and flush mounting
Chrcteristics Control sttions nd enclosures Control sttion enclosures : insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil
More informationLOCKS. Lock Cylinder and Keys. Installation. Removal. Key to Differ. Keyed Alike
PAGE 264 Lock Cylinder & Keys 265 Keys 266 Door and Drawer 270 Multi Drawer 272 Flat Multi Drawer 273 Anti Tilt 275 Double Door 276 Large Door 278 Sliding Door 278 Roller Shutter 279 Glass Door 281 Glass
More informationQuality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x
Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,
More informationLOCKR LOCKING SOLUTIONS FOR LOCKERS
EN G LOCKR LOCKING SOLUTIONS FOR LOCKERS Each site has particular requirements. Our range of cam locks is intended for facilities where lockers are dedicated to one specific user. They are manufactured
More informationLOCKS Cam Locks P Push Locks P Plug Locks P Digital Locks P. 095
OCKS -1 Cam ocks P. 092-094 -2 Digital ocks P. 095-3 Push ocks P. 096-097 -4 Aluminium Frame & Drawer ocks P. 098-101 -5 Plug ocks P. 102-103 -6 Glass ocks P. 104-109 -1 Cam ocks Cam ock 16 * mm drilling
More informationLocks. Call from anywhere in Canada - Locking Systems - Overview...493
Locking Systems - Overview...493 Lever Bit/Skeleton Keys and Accessories...494 496 Symo 3000 Locking System...497 511 Cylinder Module System...512 529 Cam Locks...516, 530, 537, 541, 543 Deadbolt Locks...514
More informationControl stations and enclosures
Chrcteristics Control sttions nd enclosures Control sttion enclosures: insulted, metl nd Insulted enclosures XAP-A Mteril nd colour Glss-reinforced polyester, coloured grey throughout Approvls Specil version:
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
More information7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
More informationABS PIPES & FITTINGS THE INDUSTRY STANDARD FOR A WIDE RANGE OF APPLICATIONS
S PIPES & FITTINGS THE INDUSTRY STNDRD FOR WE RNGE OF PPLICTIONS VUX VERSION 2 S PIPE & FITTINGS FOR INDUSTRIL PPLICTIONS INTRODUCTION S thermoplastics are recognized as a suitable material to be used
More informationFINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
More information4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
More informationFUEL SYSTEM & CARBURETION 3 A CARBURETOR R1 JUNE 1996 FUEL SYSTEM AND CARBURETION
FUEL SYSTEM & CARBURETION 3 A CARBURETOR 90-831996R1 JUNE 1996 FUEL SYSTEM AND CARBURETION 3A- 1 Tle Of Contents Pge Removing Cruretor..................... 3A-1 Disssemling Cruretor................. 3A-1
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More information1000 SERIES SURFACE MOUNTED CLOSERS
1000 SERIES SURFCE MOUNTED CLOSERS PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/ transom without adapter plates.
More informationDECORATIVE HARDWARE THE 2014 COLLECTION Brought to you by Häfele
www.hafele.com.au DECORTIVE HRDWRE THE 2014 COLLECTION rought to you by Häfele DECORTIVE HRDWRE / 732.98.681-05.14 SIMPLY HNDLE - YET SO MUCH MORE WELCOME TO THE 2014 DECORTIVE HRDWRE COLLECTION FROM HÄFELE
More informationAppendix E D791 and T791 Head and Valve Holddown Assembly Details
Appendix E D nd T Hed nd Vlve Holddown Assemly Detils Hed First Stge Holddown Assemly (") Suction with Unloder Suction (Stndrd) First Stge Holddown Assemly (") Dischrge See figure A 0 CAUTION: Alwys relieve
More informationLocks. Product range:
Locks Product range: Coin Locks Combination Locks Espagnolette Locks Keys Lay on Locks Locks for Metal Furniture Lock Strikers Mortise Locks Padlock Handle Pedestal Locks Removable Cylinder Locks Rim Locks
More informationProduct range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
More informationCast Stainless Steel Butt-Weld Outlet Connection Data
180 Stainless Steel Cast Stainless Steel utt-weld Outlet Connection Data Josam cast stainless steel drains and cleanouts are regularly furnished with Schedule 40S butt-weld outlet connections. utt-weld
More informationQuarter-turn locks, compression latches
Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle
More informationRIM LOCKS. An ASSA ABLOY Group brand ASSA ABLOY
RIM LOCKS An ASSA ABLOY Group brand ASSA ABLOY What Type of Door? A comprehensive range of locks for both exterior and interior glass panelled or solid timber doors. T G available for outward opening doors.
More informationBRAVO STERN DRIVE 3 B DRIVE SHAFT HOUSING
RVO STERN DRIVE 7 DRIVE SHFT HOUSING Tle of ontents Pge Specifictions............................... -1 Torque Specifictions..................... -1 Specil Tools............................ -1 ering Prelods.........................
More informationDOUBLETRACK 990XT PARTS INCLUDED G F I Q T Y Z. part description part number qty. 1 O. 4 lever / levier / palanca 4 Q 4 R 4 T.
DOUBLETRACK 990XT PARTS INCLUDED C B K N A U V W X L M D R E J O P H S G F I Q T Y Z prt description prt numer qty. A B C D E F G H I J K L stinger & ckone ssemly ike tue & wheel holder ssemly upright
More informationLH: 21.1 GROUP CODE MATERIAL. Plastic. Keyed alike. 01 For cams please check page: Keyed differ Stainless steel dust cap (Keyed alike)
107 KNOB - ON LOCK 261 L: 21.1 27 Clip fixing for easy assembly. Mounting nut not required. Special 20mm x 26mm cut out. There is no IP 65 version of this lock. 1.8mm maximum panel thickness. Clips to
More informationPROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
More information152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:
2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I
More informationBoiler room components 0861EN April 2017 Distribution and regulation units
oiler room components 8EN pril Distriution nd regultion units R8R R8RY R8RY R8RY R8RY Unit with insultion nd ctutor (optionl) R8RY R8RY R8RY R8RY Description R8R distriution units control heting nd cooling
More informationDoor, Hatch & Interior Fittings
Sea Blue Security Locks NEW 10 Year Guarantee Sea Blue Security locks have been developed in the lock capital of England to withstand both corrosion and physical attack. Heavy steel full casings are used
More information2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
More informationCAM LOCKS Expertise at your service
LOY M LOKS Expertise at your service The unique LOY cylinder construction offers reliable operation and ease of use in the most demanding applications. LOY EXPERTISE T YOUR SERVIE LOY cam locks have been
More informationRotary Medium Stylized wing 1.6 (.06) 1.3 (.05) 19 (.73) 48 (1.89) 1.6 (.06) 1.3 (.05) 18 (.71) 47 (1.85)
K Draw Latch Rotary Medium Stylized wing 1.6 (.06) 6.4 (.5) 9 (1.13) Stainless steel or steel, black powder coated Performance Details Steel: Max. working load: 130 N (75 lbf) Stainless steel: Max. working
More informationEa series sr & da pneumatic actuators
Ea series sr & da pneumatic actuators CONTENTS DESIGN ND FETURES Page 3 PRTS ND MTERIL Page 4 DIMENSIONL DRWINGS Page OPERTING PRINCIPLES Page LIMIT STOP DJUSTMENT Page DOULE CTING TORQUE TLE Page SPRING
More informationCCD-493 KIT SERIES INSTRUCTION SHEET
(COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED
More informationC&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
More informationAluminium Floor Outlets - Trapped Outlets
Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown
More informationTWD-U Die cast body Urethane soft tread for hard floors 50mm (2 ) & 60mm. TWH & TWH-U Heavy duty nylon body Hard or urethane tread 75mm, 100mm, 125mm
Capacities to 175 lbs. High Style casters for use on seating, business machines, or institutional equipment. Meets or exceeds IFM durability standards. Hundreds of combinations of bodies, attachments,
More informationC&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
More informationScrewdrivers. Ergonomically designed handles. Greater torque. Slip-proof grip. Threecomponent. handle a. TBI Screwdrivers
Screwdrivers TBI Screwdrivers R Screwdrivers NI Screwdrivers VE Screwdrivers VE TBI Screwdrivers Bits Impct screwdrivers Other ccessories Ergonomiclly designed hndles The superior qulity of mterils used
More informationMSR SERIES MSR RACK MOUNTING ENCLOSURE FEATURE. CAD data is downloadable from our web. Available in 16 sizes. Screws are not appeared on the surface.
MSR SERIES MSR RACK MOUNTING ENCLOSURE CAD dt is downlodble from our web. Avilble rnge -30 FEATURE Avilble in 16 sizes. Screws re not ppered on the surfce. Esy to punching or hole milling on front nd rer
More information1000 Series surface mounted closers
1000 surface mounted closers PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/4 transom without adapter plates.
More informationSECTION A-A
40.08 D 8 6 5 4 3 2 1 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D C 51.1 48 20.25 18 C 23.68 15.12 NOTE: DRWER UNIT NOT INCLUDED,
More information3/2 and 4/2-way Directional Poppet Valves with Solenoid Operation Model M-SED 6, Series 1X. Size 6 (350 bar) H/A 4243/94
3/2 nd 4/2-wy Directionl oppet Vlves with Solenoid Opertion Model M-SED 6, Series X Size 6 000 SI (30 r) 6.6 GM (2 L/min) R 22 049/06.98 R 22 049/06.98 Replces: 02.96 Fetures: Direct operted directionl
More informationSeries. 777 Oakmont Lane, Westmont, IL Outside U.S
Oakmont Lane, Westmont, IL 609 1.800..9114 Outside U.S. 1-60-90-6990 www.tksimplex.com G SERIES IR TORQUE PUMP PRTS IDENTIFICTION MNUL Reference # - TD09 Rev. - Date - 8/10 This illustration is for reference
More informationDrill Selection Guide
Drill Selection Guide PISTOL GRIP TOOL TYPE FREE SPEED STINLESS STEEL TITNIUM HRD CST IRON, MEDIUM HRD SOFT CST IRON, MILD STEEL HRD PLSTICS LUMINIUM, RSS, COPPER, COMPOSITE WOOD, SOFT PLSTICS, STEEL RONZE
More informationPART NUMBER BREAKDOWN
SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options
More informationOur sunshade for outdoor
SCHATTELLO You would like to plese our guests on hot summer s d offering them welcoming set outdoors in the cool shde? Or to chrm them on nipp d or chill night conjuring up cos tmosphere with dimmed lights
More informationMultiple key codes Tool actuation Change key codes in future Configure to order. Page 164 Page 164
162 CM Cam Locks Selection Removable core options provide maximum flexibility Fixed core options provide simple, economic solutions Sealed housings are available Multiple finishes A broad selection of
More informationWARNING: IF THERE ARE ANY DISCREPANCIES BETWEEN THE CAD FILE AND THE DRAWING, THE DRAWING WILL TAKE PRECEDENCE. IF IN DOUBT, ASK.
28.48 DJUSTLE 5.64 19.78 DJUSTLE D 8 7 6 5 4 3 2 1 20.37 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D 51.80 48.00 9.57 C C 18.00
More informationElectro Controls. Valves / Linkages WattsIndustries.co.uk
Electro Controls Valves / Linkages - 07 WattsIndustries.co.uk valves / linkages Section MOUNTING INSTRUCTIONS FOR LINKGES EE.. M K / EE..ES / EE..RD EE..MK UTO MNUL UTO MNUL UTO MNUL. Push the valve spindle
More informationNew Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS
New Products Inside DUMETA OVERVIEW CATALOGUE COMPONENTS 1 Modifications & Custom Components Diverse manufacturing capabilities and experienced on-site technical personnel allow Dumeta to offer a wide
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More informationAWWA Grooved Fittings
WW Grooved Produts WW Grooved Fittings MTERI SPECIFICTIONS Mteril - Dutile Iron per STM 53 Grde 5-45-12. Interior lining - Cement lined per NSI/WW C104/21.4 sizes 3 single thikness nd sizes 4-3 doule thikness
More information4/2- and 4/3-directional spool valve solenoid-operated, direct-acting 4WE 6
4/2- nd 4/3-directionl spool vlve solenoid-operted, direct-cting 4WE 6 DESCRIION HYDC 4/2- nd 4/3- directionl spool vlves of the 4WE 6 series re directionl vlves for oil hydrulic systems which re used
More informationUNIVERSAL ALUMINIUM CASE
UC SERIES UNIVERSAL ALUMINIUM CASE 3 2 4 Simple structure nd tough cse with extruded luminium covers. 36 sizes nd 3 different colors for totl of 108 different combintions re vilble. 2 or 3 grooves vilble
More information8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
More informationIncremental encoders Solid shaft with square flange pulses per revolution
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil
More informationSolenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
More informationAWWA Grooved Fittings
WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne
More informationCAM LOCKS CAM LOCK DD-CC ZAMAK - CHROME DD-CC ZAMAK - BLACK COATED DD-CC PLASTIC C C D D. web
063 LOCK ø 063 1-1-DD-CC ZAAK - CHROE 063 1-2-DD-CC ZAAK - BLACK COATED 063 2-0-DD-CC PLASTIC Quarter-turn operation Body length 20.5 mm (Please be sure to order appropriate cam) Available in all die-cast
More informationKNOW HOW. Ironmongery. Ironmongery
KNOW HOW The term, originally referred both to the manufacture and the place of sale of iron goods produced for domestic rather than industrial use. The usage of the term has expanded in recent times to
More informationGo to the page for your application: face frame page 9, panel page 11, or narrow frame aluminum door page 13.
Using this tlog Step 1: Determine your pplition Go to the pge for your pplition: fe frme pge 9, pnel pge 11, or nrrow frme luminum door pge 13. Step 2: Clulte the power ftor Determining the Power ftor
More informationCamlock Cylinders BMZ
BMZ 83-3-032 Configuration Brass chrome plated cylinder Zinc-coated steel cam Nickel-plated brass fastening nut Reversible key made from nickel silver Included with the cylinder 2 reversible keys Kaba
More informationCabinet & Drawer Hardware
www.crh.com.au SOLUTIONS FOR TRADE Cabinet & Drawer Hardware November 2017 www.crh.com.au SOLUTIONS FOR TRADE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19
More informationCCS-810 KIT SERIES INSTRUCTION SHEET
(COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED
More informationAppendix E Head and Valve Assembly Details All D-Style Models 351
Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All
More information4/3-4/2 Directional valve elements L8_81 (ED4-P1) with or without LS connections. RE Edition: Replaces:
4/ - 4/ Directionl vlve elements L8_81 with proportionl (ED4-1) control nd with or without LS connections L8_81 (ED4-1) RE 181-1 Edition: 9.18 Replces: 7.1.17 Size Series Mximum operting pressure r (4
More informationFURNITURE & CABINET LOCK
FURNITURE & CABINET LOCK LOCK HARDWARE Www.ammalocks.com DRAWER LOCKS 1 DRAWER LOCK (DIAMOND BACK) 15.7 2.7 106 ITEM NO: 106 100 key changes, K/A, K/D FINISHES: nickel PACKAGING: 2 keys SUITABLE FOR: 7/8"
More informationR E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO E R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO E EQUIVLENT TO MT-007. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT ECOMES
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationDoor thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
More informationcpci PANELS EXTRUDED FRONT PANELS
cpci PNELS EXTRUDED FRONT PNELS cpci 4HPx6U 0.135 (3.43) 0.784 (19.92) 0.685 (17.40) 0.545 (13.84) 0.394 (10.01) 0.330 (8.38) 0.118 (3.0) 0.580 (14.73) cpci 4HPx3U 0.295 (7.49)2x 0.234 X 0.130 0.120 R
More informationGlass & Wooden Door Fittings
Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems
More informationACCESS SOLUTIONS. NEW PRODUCTS OVER
OVER 250 NEW PRODUCTS ACCESS SOLUTIONS Search our range of over 2000 RoHS and REACH compliant parts, and find your industry solution across cabinet manufacturing, machine building, power generators, HVAC,
More informationModularity and simplicity in action. A variety of materials and finishes to complement your application. Die-cast zinc latch bodies standard finishes:
116 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationDirectional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
More informationRPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
More informationUNEQUAL FLANGE RACK ACCESSORIES
CUSTOM CBINETS & RCKS Products for Custom Installation Solutions www.custcab.com UNEQUL FLNGE RCK CCESSORIES Custom Cabinets & Racks offers a large range of accessories to custom tailor UEF equipment racks
More informationDC CONTACTOR. hubbell industrial controls, inc. Hubbell Industrial Controls, Inc. Type Ampere 1500 Volt DC Contactor
Huell Industril Controls, Inc. 716 1600 Ampere 1500 Volt DC Contctor Ctlog 42716 Mrch 2013, Replces Septemer 2005 42716 Highlights Non-polrized rc chute (series lowout coil) design s stndrd Optionl polrized
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
More informationClassic 9. Sliding Door Systems, C-Profile
Clssi 9 Sliding oor Systems, C-Profile Tle of Contents Clssi 9 - Tue rive Systems, C-Profile Trks, Joint Brkets Hngers Srew-on Pltes Fixing Brkets Side Fixing Brkets Trk Stoppers U-Trks nd Guide Rollers
More information20T Low Headroom Hoist Date TNC 20/4 LHR DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 890kg Weight D01-AHT35 REV0
REVISION HISTORY REV. DTE PPROVED D-HT REV Scale not to scale Designed y Drawn y Checked y pproved y Surname T. Mikolajewski T. Mikolajewski. itken Title of Project Title of Part / Linear up to, over up
More informationCAMLOCKS
CAMLOCKS 2 www.illinoislock.com 800-733-3907 CUSTOM ENGINEERED SOLUTIONS With more than 80 years of experience in lock design and manufacturing, Illinois Lock Company has developed a broad range of engineered
More informationINDEX - ALUMINIUM RANGE HINGES. profile 0.35 N.m. FinAlu continuous hinge 466. profile 0.70 N.m. Aluminium profile continuous hinge - 50 mm
LUMINIUM RNGE INEX - LUMINIUM RNGE HINGES Finlu continuous hinge 466 luminium profile continuous hinge - 50 mm Rolled knuckle continuous hinge - 20 mm width Rolled knuckle continuous hinge - 25 mm width
More informationT Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
More information11 263/ Radial Piston Pump Model R4 /Series 2X Fixed Displacement. Ordering Code 1 PF 1 R4 2X R Replaces:
ize.60 to 0.00 Rdil iston ump Model R4 /eries X Fixed Displcement 0,0 I (00 br).9 in /rev (9.4 cm /rev) RA 6/0.9 RA 6/0.9 Replces: 06.89 K 6/ Rdil piston pump with 0 pistons nd prllel shft Chrcteristics:
More informationHarmer Roof Drainage The Cast Iron Range
Cst Iron Roof Outlets - Introduction Hrmer Roof Dringe The Cst Iron Rnge The high qulity Cst Iron Roof Outlet rnge, feturing medium sump nd lrge sump odies, two-wy outlets nd n extensive rnge of lodering
More information8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
More information00083FAB-DC DRAWN BY DATE CHK SCALE SIZE
D0D/6 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. 0 5/4/8 SPLIT SIDE PNEL JGC TOP CP CURVED PERFORTED SINGLE HINGE DOOR SPLIT SIDE PNEL
More information[1200mm] 5" [125 mm] 2 3/4" [70mm] [2600mm] [450mm]
MIN 9'-10 1/2" [3010mm] 9'- CR 8'-6"MIN [2825mm] 6'-0" 12" S [2550mm] CR [1800mm] ON SIDE PLN "" 8'-8" CR 2 [2600mm] 6'-0" CR [1800mm] 2 FRONT ND RER S [55mm] 8'-6" [2550mm] [55mm] [125 mm] 2 [70mm] 6
More informationSolenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
More informationINSTALLATION GUIDE INSTALLATION GUIDE
INSTALLATION GUIDE INSTALLATION GUIDE CONTACT US By selecting Hiku fn, you ve chosen qulity design, heightened comfort nd effortless conservtion. Use this guide to sfely instll your fn. Plese contct us
More information