HYDRAULIC DISC BRAKES LB, LBS, LBV- Wet

Transcription

1 HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature range, [ F] Viscosity range, mm /s Filtration Maintenance Mineral based- HLP(IN 554) or HM(ISO 674/4) -4 4 [-4 4] 75 [9 47] ISO code /6 (nominal filtration of 5 microns) hanged after the first 5- h, then after every 5-5 h. ONTENTS Hydraulic isc Brake for MP, MR and MS Motors type LB/ Hydraulic isc Brake for MSS and MSV type LBS(V)/ Hydraulic isc Brake for MSS and MSV type LBS(V)/ Output Shafts for LBS(LBV)/9, 9... Specification data for LBS(LBV)/9, 9... Load curve for LBS(LBV)/9, 9... Internal Spline data for.../9,9 and.../4,5...9 Order code for LB/,LBS(LBV)/9, Hydraulic isc Brake for MTS and MTV type LBS(LBV)/4... Hydraulic isc Brake for MTS and MTV type LBS(LBV)/5... Specification data for LBS(LBV)/4, 5... Load curve for LBS(LBV)/4, 5... Output Shafts for LBS(LBV)/4, 5... Order code for LBS(LBV)/4, 5... Hydraulic isc Brake for MVS type LBS/...4 Load curve for LBS/...4 Hydraulic isc Brake for MVS type LBS/6...5 Load curve for LBS/6...5 Specification data for LBS/, Output Shafts for LBS/, Internal Spline data for LBS/, Order code for LBS/, LB, LBS LBV T

2 LB HYRULI IS FOR FLNGE TTHMENT TO MP, MR N MS HYRULI MOTORS TYPE LB/ max,7 [4.476] ø6±, [4.7±.79] 7 [.7] 55 [.65] 4 [.55] max 55 [.65] (max 7 [.775] for B and KB shafts) 6,±,5 [.4±.9] 4x4 +, [.55 ] , +, ø,5 [.4 ] ø,5 [.4 ] -, -, max 5 [4.4] max 5 [4.4] INPUT SHFT see page 5,5 [.5] [.47] OUTPUT SHFT see page 5 xm mm [.47 in] depth ø6,4±,5 [4.9±.59] 7 [.6]* (tightening torque for screw Mx -. IN 9-7 danm [6 in-lb]) : Brake release Port - G¼, 9 mm [.5 in] depth,5 : rainage tap - G¼, 9 mm [.5 in] depth * - For Input Shaft Hole Versions SH and SB. 45 LO URVE ø4 [5.7] dan lbs SPEIFITION T escription LB/ *Min. Static Torque, danm [lb-in] [5-7] [5-7] [77-947] [74-9] [6-9] [ ] Opening Pressure, min bar [PSI] max Min. oil quantity for brake releasing, cm [in ] Oil volume cm [in ] Max. Pressure in drain space, bar [PSI] Weight, kg [lb] [5-6] [-] - - [74-] [6-9] [ 45] 7 - [ ] 5 - [.5-7.5],5 [ 7.5] 9 [ 9.] [4-77] *Static torque is obtained at working pressure - bar [ PSI]. -9 [55-565] P= a 5 dan [ 56 lbs] n 4 6 RPM [.] Prad

3 LB INPUT SHFT HOLES OUTPUT SHFT EXTENSIONS +,5 4,5 [ ] +,, +,5 +, [ ] [.4 ] ,6 ø5+, +.4 [.94 +.] -,6 [.5 ] -.4 -, [. ] - ø5 straight, Parallel key x7x IN 65 Max. Torque 4 danm [ lb-in] -. 6,4 -,5 [.5 ] -.9 [.7] M 4,±, [.7±.4] +,5 +, O - ø" straight, Parallel key ¼"x¼"x¼" BS46 Max. Torque 4 danm [ lb-in] ø5 [.94 ] O 6,4 +,6 [.5 +.4] +, -,, [.6 ] [.7] -, ø5,4 [. ] -. +,,4 [. ] +.79 M 4,±, [.7±.4] SH - splined, BS 59 (SE 6B) Max. Torque 4 danm [ 54 lb-in] +,5 4,5 [ ] SH 6,5±,5 [.5±.] +,6 ø5,4 +, +.4 [. +.] ø,47±,7 [.45±.7] -,5 6,5 -,5 [.46-.9] M [.7] min 6,4 [.9] 4,±, [.7±.4] ø5,±, [.997±. SB S - splined, B5xh9 IN 54 Max. Torque 4 danm [54 lb-in] [.7] M 6,4± [.9±.9] 4,±, [.7±.4] B - ø straight, Parallel key xx45 IN 65 Max. Torque 77 danm [65 lb-in] -,6 [.94 ] -.4 -, 6 ø4,5 6 +, [.964 ] +.79 [.4 ] ø [.66] -.5 ø5 [.94] 5 -, [.7 ] -.79 [.7] ø +, +, ,5 [.6 ] 6, 4 [.57] [.55 ] ,5 4,5 [ ] +, ø6, [. ] +.7 +,5 ø,59 [.5 +.] +,5,5 [. +.97] Involute spline 5x H IN 54 M 56,±, [.567±.4] B +,6 +,5 [ ] , +, [.4 ] 6 -, [.6 ] -. KB - tapered :, Parallel key B6x6x IN 65 Max. Torque 95 danm [4 lb-in] - 6±,7 [.47±.75] [.77] S=4 Tightening torque ± danm [77± in-in] ø4,5 [.77] 56,5 +,5 [ ] +,5 ø+,5 [ ] 5 9,-, [.75 ] +.9 [.7] Mx,5 5 Taper : 5±,4 [.96] [. ±.6] ø44 [.7]

4 HYRULI IS FOR FLNGE TTHMENT TO MSS N MSV HYRULI MOTORS TYPE LBS/9 max 6 [4.96] max 5 [4.4] ø6±, [4.7±.79] 7 [.669] 7 [.7] 4 [.55] max 66,5 [. 6] 4x4 +, +.79 [.55 ] ø4 [5.7] ø5±, [4.9±.79] ø +,54 [.97 ] +. 4xM ø,5 +,5 +.9 [.4 ] INPUT SHFT 5 [.94] [.5] 5,5 [.6] 6,±,5 [.4±.9] OUTPUT SHFT see page (tightening torque for screw Mx5 -. IN 9-5 danm [44 lb-in]) TYPE LBV/9 max 5 [5.5] max 5 [4.4] T ø6±, [4.7±.79] [.] 7 [.7] 4 [.55] max 7 [.775] 4x4 +, +.79 [.55 ] ø4±, [4.94±.9] +,54 ø9 [.54 ] +. 4xM ø,5 +,5 +.9 [.4 ] (tightening torque for screw M -. IN 9-5 danm [44 lb-in] ) INPUT SHFT 6±, [.6±.79] 5,5-,5 [ ] max 49 [.99] 6,±,5 [.4±.9] OUTPUT SHFT see page : Brake release Port - G¼, 9 mm [.5 in] depth, T: rainage tap - G¼, 9 mm [.5 in] depth 6

5 HYRULI IS FOR FLNGE TTHMENT TO MSS N MSV HYRULI MOTORS TYPE LBS/9 4x4 +, [ ] 7 [.669] max 7,4 [.5] 6 [.4] max 4 [4.94] ø6 ±, [6.99±.79] ø4 [5.7] ø5±, [4.9±.79] ø +,54 [.97 ] +. 4xM ø5 -,6 [4.9 ] [5.7] INPUT SHFT 5 [.94] [.5] 5,5 [.6] (tightening torque for screw Mx5 -. IN 9-5 danm [44 lb-in]) TYPE LBV/9 6 [.69] [.5] OUTPUT SHFT see page max, [.9] T 4x4 +, [ ] [.] 6 [.4] max 4 [4.94] ø6 ±, [6.99±.79] ø4±, [4.94±.9] +,54 ø9 [.54 ] +. 4xM ø5 -,6 [4.9 ] [5.7] INPUT SHFT 6±, [.6±.79] 5,5-,5 [ ] max 49 [.99] 6 [.69] [.5] OUTPUT SHFT see page (tightening torque for screw M -. IN 9-5 danm [44 lb-in] ) 7 : Brake release Port - G¼, 9 mm [.5 in] depth, T: rainage tap - G¼, 9 mm [.5 in] depth

6 OUTPUT SHFT EXTENSIONS B - ø straight, Parallel key xx45 IN 65 KB - tapered :, Parallel key B6x6x IN 65 Max. Torque 77 danm [65 lb-in] Max. Torque 95 danm [4 lb-in] -,6 [.94-.4] 6 -, [.6 ] ±,7 [.47±.75] [.77] S=4 Tightening torque ± danm [77± in-in] ø4,5 [.77] , [.7 ] [.7] M 56,±, [.567±.4] +, +, ø [.6 ] ,-, [.75 ] +.9 [.7] 5 Taper : 5±,4 [.96] [. ±.6] Mx,5 ø44 [.7] SPEIFITION T escription LBS/9(9) LBV/9(9) 4 6 *Min. Static Torque, danm [lb-in] [77-947] [74-9] [6-9] [ ] Opening Pressure min bar [PSI] [74-] [6-9] [4-77] [55-565] max [ 45] Min. oil quantity for brake releasing cm [in ] 7 - [ ] Oil volume cm [in ] 5 - [ ] Max. Pressure in drain space bar [PSI] 5 [ 7] Weight kg [lb] 9 [ 9.] *Static torque is obtained at working pressure - bar [ PSI]. LO URVE The curve applies to a B bearing life of hours at RPM. : Pa< 5 dan [ 77 lbs] : Pa= 5 dan [ 5 lbs] LBS(V)/9 LBS(V)/9 dan 6 Pa - in lbs 4 dan 6 4 Pa in lbs mm mm

7 Standard NS B9.-97, class 5 [ m=.66] Fillet Root Side Fit mm Number of Teeth z iametral Pitch P /4 Pressure ngle º Pitch ia. 5,4 Major ia. ri,-, Minor ia. i +,, Space Width [ircular] Lo 4,±, Fillet Radius R, Max. Measurement L +,5 7,6 between Pins Pin ia. d 4,5±, orrected x.m +, INTERNL SPLINE T FOR THE TTHE OMPONENT LBS(V)/9 LBS(V)/9 inch /4 º LBS(V)/4 LBS(V)/5 mm inch 6 6 /4 /4,656. +,4, ,6, ,56±, ,5. +, 6, ,5±, , +.9 LB/ ORER OE - LB/ Pos. - Input Shaft Hole, O, SH, B, SB B KB - ø straight, Parallel key xx45 IN 65 - tapered :, Parallel key B6x6x IN65 Pos. - Static Torque code (See Specification data) 7, 4,,, 4, 6 Pos. - Output Shaft Extensions* - ø5 straight, Parallel key x7x IN 65 O - ø" straight, Parallel key ¼ x¼ x¼ BS46 SH - ø5, splined BS 59 (SE 6B) S - ø4,5 splined B5x IN 54 LB / - Pos. - Type S - isc Brake for short motor S- MSS V - isc Brake for very short motor V- MSV Pos. - esign code Pos.5 - Option (Paint)** 9 - for MSS and MSV Motors omit - no Paint 9 - for MSS and MSV Motors (Wheel Mount) P - Painted Pos. - Static Torque code P - orrosion Protected Paint (See Specification data),, 4, 6 Pos.6 - esign Series omit - Factory specified NOTES: * The permissible output torque for shafts must not be exceeded! For Max. Torque values see data on page 5 and. ** The color is by customer's request. The isc Brakes are mangano-phosphatized as standard. TTENTION:. Hydraulic brake is delivered without oil (it is lubricated only).. In all brakes, friction discs and separators should be lubricated. Space is filled with 5 cm [.5 7. in ] mineral oil HLP (IN 554) or HM (ISO 674/4). For LB/ fill oil after hydraulic motor assembly. 9 Pos.4 - Option (Paint)** omit P P - no Paint - Painted - orrosion Protected Paint Pos.5 - esign Series omit - Factory specified ORER OE - LBS, LBV Pos.4 - Output Shaft Extensions* B - ø straight, Parallel key xx45 IN 65 KB - tapered :, Parallel key B6x6x IN65