Hydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified

Size: px
Start display at page:

Download "Hydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified"

Transcription

1 SOOL VALVE HYDAULI MOOS Quality assured company - ISO 9001 ertified SOOL VALVE - he distributor valve has been integrated with the output shaft. he valve has hydrodynamic bearings, and has infinite life when load ratings are not exceeded. GEA SE - here are two forms of stator, hence and of gear set: MM and M have plain teeth. hese types motors are suitable for long operating periods at moderate pressures or short operating periods at high pressures. and MH have teeth fitted with rollers. he rollers reduce local stress and the tangential reaction forces on the rotor reducing friction to a minimum. his gives long operating life and better efficiency even at continuous high pressures. oller Gear Sets are recommended for operation with thin oil and for applications having continually reversing loads. Hydraulic motor type MM Max. ressure Max. Oil ment Speed Max. orque Max. Output Drop Flow ode [cm3/rev] [M] [danm] [kw] [bar] [lpm] MM 8 8, ,1 1,5 1,8 2, MM 12,5 12, ,6 2,3 2,4 3, MM ,5 3,5 2,4 3, MM 32 31, ,7 2,4 3, MM ,1 5,7 1,8 3, MM ,5 5,8 1,7 2, Hydraulic motor type Max. ressure Max. Oil ment Speed Max. orque Max. Output Drop Flow ode [cm3/rev] [M] [danm] [kw] [bar] [lpm] 50 51,5 775, , , , , , , ,5 14, , , , , , , ,5, , , ,8 8, M+S Hydraulic was established as a state company in 1963, servicing the construction industry, excavating machines, bulldozers and auto cranes is the initial point for production of low speed, high torque planetary hydromotors the license for which is bought from Danfoss Denmark. 86

2 Quality assured company - ISO 9001 ertified DIS VALVE HYDAULI MOOS DIS VALVE 's function is to distribute fluid to the oller Gear Set. he pressure balanced sealing surface on the valve face and the separately driven maintains minimal leakage and mechanical losses. hese gives the motors high efficiency even at high pressures, and good starting characteristics. OLLE GEA SE minimizes friction and thereby increases efficiency while providing smooth output shaft rotation. MS, M and MV are suitable for continuous operation under rough operating conditions- high pressures, thin oil, or frequent reversals. he apered roller bearings permit high radial loads. Hydraulic motor type MS Max. ressure Max. Oil ment Speed Max. orque Max. Output Drop Flow ode [cm3/rev] [M] [danm] [kw] [bar] [lpm] MS 80 80, MS MS , MS , MS MS MS , MS MS , ,4 11, MS , ,6, MS , ,9 9, Hydraulic motor type M Max. ressure Max. Oil ment Speed Max. orque Max. Output Drop Flow ode [cm3/rev] [M] [danm] [kw] [bar] [lpm] M , , M , , M , , M , , M 400 4, M , , M , ,3 27, M ,2 26, Hydraulic motor type MV Max. ressure Max. Oil ment Speed Max. orque Max. Output Drop Flow ode [cm3/rev] [M] [danm] [kw] [bar] [lpm] MV , , MV , , MV , , MV , MV , ,

3 HYDAULI MOOS ALIAION»»»» onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines» Agricultural machines» Food industries» Grass cutting machinery etc. ONENS Specification data Function diagrams Dimensions and mounting Shaft extensions ermissible shaft loads ermissible shaft Seal ressure Order code GENEAL Max. Displacement, Max. Speed, Max. orque, Max. Output, Max. ressure Drop, Max. Oil Flow, Min. Speed, ressure fluid emperature range, cm /rev [in /rev] [M] danm [lb-in] kw [H] bar [SI] lpm [GM] [M] O [ F] 2 Optimal Viscosity range, mm /s [SUS] Filtration O OIONS» Model - Spool valve, roll-gerotor» Flange mount» Motor with needle bearing» Side and rear ports» Shafts - straight, splined and tapered» Shaft seal for high and low pressure» Metric and BS ports» Speed sensoring» Other special features 397 [ 24.4] 970 cont.: 61 [ 5400] int.: 69 [60] 15 [ 20.1] cont.: 175 [ int.: 200 [ 75 [20] Mineral based- HL(DIN 51524) or HM(ISO 6743/4) [ ] [ ] ISO code 20/16 (Min. recommended fluid filtration of 25 microns) Oil flow in drain line ressure Losses ressure drop bar [ SI] 0 [1450] 140 [ 2030] Viscosity Oil flow in drain line 2 mm /s [ SUS] lpm [ GM] 20 [ 98] 35 [ 164] 20 [98] 35 [164] 2,5 [.660] 1,8 [.476] 3,5 [.925] 2,8 [.740] p bar p SI Q, GM Q, lpm 32 88

4 MOOS SEIFIAION DAA Specification Data for... motors with, O, SH, K and SA shafts. (ø28,56 sealing diameter) ype 3 Displacement, cm /rev 50 51, ,3 0 99, , , , , , [ in /rev ] [3.14] [ 4.90] [ 6.09] [ 7.67] [ 9.74] [ 12.19] [ 15.26] [ 19.26] [ 24.4] Max. Speed, [M] Max. orque [ 900] 20 [ 1770] 24 [ 2125] 30 [ 2655] 39 [ 3450] 38,5[ 34] 39 [ 3450] 36 [ 3185] 38 [ 3360] danm [ in-lb] 13 [ 1150] 22 [ 1947] 28 [ 2480] 34 [ 30] 43 [ 3805] 46 [ 4070] 47 [4160] 47 [4160] 47 [4160] eak** 17 [ 1505] 27 [ 2390] 32 [ 2832] 37 [ 3275] 46 [ 4070] 56 [ 4960] 60 [53] 61 [5400] 61 [5400] Max. Output 7 [ 9.5] 12,5 [ 17] 13 [ 17.4] 12,5[ 16.8] 11,5[ 15.4] 9 [ 12] 8 [.7] 5 [6.7] 4,8 [ 6.4] kw [ H] 8,5 [ 11.9] 15 [ 20.1] 15 [ 20.1] 14,5[ 19.5] 14 [ 18.8] 12 [16.1] 9,5 [ 12.7] 8 [.7] 6,8 [9.1] Max. ressure Drop 140[ 2030] 140[ 2030] 1[ 1600] 85 [1230] 65 [940] bar [ SI] 140[2030] 115[1670] 90 [1300] eak** 150[2175] 115[1670] Max. Oil Flow 40 [.5] 60 [ 15.8] 60 [ 15.8] lpm [ GM] 50 [ 13.2] 75 [19.8] Max. Inlet ressure bar [ SI] eak** Max. eturn res- sure with Drain Line bar [ SI] eak** Max. Starting ressure with Unloaded Shaft, bar [ SI] [ 145] [ 145] [ 145] 9 [ 130] 7 [ 2] 5 [ 73] 4 [ 58] 3 [ 44] 3 [ 44] Min. Starting orque At max.press. danm [ in-lb] drop 8 [ 7] 15 [ 1330] 20 [ 1770] 25 [ 2215] 32 [ 2832] 33 [ 2920] 31 [ 2740] 31,5[2875] 31,5[ 2875] At max.press. drop [ 85] 17 [ 1505] 23 [ 2035] 28 [ 2480] 37 [ 3275] 40 [ 3540] 48 [ 4250] 58 [ 5220] 50 [ 4425] Min. Speed***, [M] Weight, kg [ lb] M (F) 6,8 [ 15] 6,9 [ 15,2] 7,2 [ 15.9] 7,3 [ 16.1] 7,5 [ 15.2] 8 [ 17.6] 8,4 [ 18.5] 9,1 [ 20] 9,8 [ 21.6] For rear ports : + 0,650 [ 1.433] Q(N) 6,2 [ 13.7] 6,3 [ 13.9] 6,6 [ 14.6] 6,8 [ 15] 7,6 [ 15.4] 7,2 [ 14.7] 7,8 [ 17.2] 8,6 [ 19] 9,3 [ 20.5] * Intermittent operation: the permissible values may occur for max. % of every minute. ** eak load: the permissible values may occur for max. 1% of every minute. *** For speeds lower than given, consult factory or your regional manager. 1. Intermittent speed and intermittent pressure must not occur simultaneously. 2. ecommended filtration is per ISO cleanliness code 20/16. A nominal filtration of 25 micron or better. 3. ecommend using a premium quality, anti-wear type mineral based hydraulic oil HL(DIN51524) or HM ( ISO 6743/4). If using synthetic fluids consult the factory for alternative seal materials. 4. ecommended minimum oil viscosity 13 mm²/s [70 SUS] at 50 [122 F]. 5. ecommended maximum system operating temperature is 82 [180 F]. 6. o assure optimum motor life fill with fluid prior to loading and run at moderate load and speed for -15 minutes

5 MOOS DIMENSIONS AND MOUNING DAA SA Shaft SH Shaft K Shaft Shaft O Shaft SA Shaft SH Shaft K Shaft Shaft O Shaft max 55 [2.165] max 55 [2.165] Shaft Dim. See age 28 max 49 [1.929] max 49 [1.929] max L 38±0,15 [1.496±.0059] (A,B) ort A ort B 74±0,3 [2.913±.0118] Flange Dim. See age 41 max L (A,B) 44±0,15 [1.732±.0059] ort A 80±0,3 [3.149±.0118] ort B L1 ort Dim. See age 41 L1 max ø5 [ 4,134] max ø5 [ 4,134] E ear ports OB Shaft KB Shaft B Shaft HB Shaft max L max 70 [2.756] max 68,3 [2.689] SB Shaft max 14 [.551] mm [in] (A, B) : 4xM8-13 mm [.51 in] depth : 2xG1/2 or 2xM22x1,5-15 mm [.59 in] depth : G1/4 or M14x1,5-12 mm [.47 in] depth (plugged) Standard otation Viewed from Shaft End ort A ressurized - W ort B ressurized - W everse otation Viewed from Shaft End ort A ressurized - W ort B ressurized - W ype L, mm [in] ype L, mm [in] ype L, mm [in] ype L, mm [in] L 1, mm [in] (F) 50 (F) 80 (F) 0 (F) 125 (F) 160 (F) 200 (F) 250 (F) 315 (F) ,0 [5.43] 143,0 [5.63] 146,0 [5.75] 150,5 [5.93] 156,5 [6.16] 163,5 [6.44] 172,0 [6.77] 183,0 [7.20] 198,0 [7.80] Q 50 Q 80 Q 0 Q 125 Q 160 Q 200 Q 250 Q 315 Q ,5 148,5 152,0 156,5 162,5 169,5 179,0 189,0 204,0 [5.65] [5.85] [5.98] [6.16] [6.40] [6.67] [7.05] [7.44] [8.03] (F)E 50 (F)E 80 (F)E 0 (F)E 125 (F)E 160 (F)E 200 (F)E 250 (F)E 315 (F)E ,5 162,5 165,5 170,0 176,0 183,0 192,0 204,0 218,0 [6.20] [6.40] [6.52] [6.69] [6.93] [7.20] [7.56] [8.03] [8.58] QE 50 QE 80 QE 0 QE 125 QE 160 QE 200 QE 250 QE 315 QE ,5 [6.44] 168,5 [6.63] 171,5 [6.75] 176,0 [6.93] 182,0 [7.17] 189,0 [7.44] 198,0 [7.80] 2,0 [8.27] 224,0 [8.82] 9,0 [.35] 14,0 [.55] 17,4 [.69] 21,8 [.86] 27,8 [1.09] 34,8 [1.37] 43,5 [1.71] 54,8 [2.16] 69,4 [2.73] 40 90

6 MOOS 2xø13,35 +0, [.525 ] Oval Mount (2 Holes) MOUNING 8±0,3 [.315±.0118] 130 [5.118] ø6,4±0,2 [4.189±.0079] F - Oval Mount (4 Holes) max 7,5 [ 4,232] Q - Square Mount (4 Bolts) ø82, [3.25±.0039] min 15 deep [.59] 82 [3.228] ø82,5±0,05 [3.248±.0019] ø82,5±0,05 [3.248±.0019] 16 [.63] xø13,35 +0, [.525 ] ø6,4±0,2 [4.189±.0079] 8±0,3 [.315±.0118] 4xM 16 [.63] ø44,4±0,05 [1.748±.0019] 130 [5.118] max 7,5 [ 4,232] 82 [3.228] max 7,5 [ 4,232] 2,3±0,3 [.098±.0118] mm [in] OS Side orts E ear orts 18±0,1 [.708±.0039] 20±0,3 [.787±.0118] ort A 20±0,3 [.787±.0118] max 7,5 [ 4,232] max L 20 [.787] ort A 18±0,1 [.708±.0039] 25 [.984] 20±0,3 [.787±.0118] (A, B) ort B 20±0,3 [.787±.0118] (A,B) : 4xM8-13 mm [.51 in] depth : 2xG1/2 or 2xM22x1,5-15 mm [.59 in] depth : G1/4 or M14x1,5-12 mm [.47 in] depth (plugged) ,2 [1.23] ort B Standard otation Viewed from Shaft End ort A ressurized - W ort B ressurized - W 7,1 [.279] (A,B) 5 [. 197] everse otation Viewed from Shaft End ort A ressurized - W ort B ressurized - W

7 MOOS ODE ODE M os.1 - Mounting Flange - Oval mount, two holes F Q os.2 N os.3 - ort type E os.4 - Displacement code os.5 - Shaft Extensions *(see* page 28) V O VO SH VSH K SA VSA B KB SB OB HB - Oval mount, four holes - Square mount, four bolts - Option (needle bearings) - none - with needle bearings - Side ports - ear ports - 51,5 cm /rev [ 3.14 in /rev] - 80,3 cm /rev [ 4.90 in /rev] - 99,8 cm /rev [ 6.09 in /rev] - 125,7 cm /rev [ 7.67 in /rev] - 159,6 cm /rev [ 9.74 in /rev] - 199,8 cm /rev [12.19 in /rev] - 250,1 cm /rev [15.26 in /rev] - 315,7 cm /rev [19.26 in /rev] - 397,0 cm /rev [24.40 in /rev] - ø25 straight, arallel key A8x7x32 DIN ø25 straight, arallel key A8x7x32 DIN6885 with corrosion resistant bushing - ø1" straight, arallel key ¼"x¼"x1¼" BS46 - ø1" straight, arallel key ¼"x¼"x1¼" BS46 with corrosion resistant bushing - ø25,32 splined BS 2059 (SAE 6B) - ø25,32 splined BS 2059 (SAE 6B) with corrosion resistant bushing - ø28,56 tapered 1:, arallel key B5x5x14 DIN ø24,5 splined B 25x22 DIN ø24,5 splined B 25x22 DIN 5482 with corrosion resistant bushing - ø32 straight, arallel key Ax8x45 DIN ø35 tapered 1:, arallel key B6x6x20 DIN splined A 25x22 DIN ø1¼" tapered1:8, arallel key "x "x1¼" BS46 - ø1¼" splined 14 ANSI B os. 6 D U os. 7 1 os. 8 M os. 9 os. NOES: - Shaft Seal Version (see page 30) - Low pressure shaft seal or Standard shaft seal for... B shaft - Standard shaft seal - High pressure shaft seal (without check valves) - Drain ort - with drain port - without drain port - orts - BS (ISO 228) - Metric (ISO 262) - Special Features (see page 118) - Design Series - Factory specified he following combinations are not allowed: - Q flange with...b shafts; - N option with...b shafts, Low ressure Seal or U option; -...B shafts with D and U shaft seals. * he permissible output torque for shafts must not be exceeded! he hydraulic motors are mangano-phosphatized as standard

8 HYDOSAI SEEING UNIS YE HKU(S).../5(D)()(E)(E)(U) he HKU(S).../5(D)()(U) range expands the steering units family of M+S Hydraulic with the " and Load Sensing Outlet" version (static and dynamic hydraulic connection to the priority valve). his range is manufactured in two versions; for modularly and pipe mounting and therefore were developed the two versions of priority (tracing) valves: D... and... HKU.../5 is designed to be connected to priority valves with built-in relief valves for rated flow up to 160 lpm [ 42 GM] -.../160. he control hydraulic circuits of the HKU(S).../5() steering units were designed to ensures minimal energy consumption (energy losses) in various hydraulic systems, such as those of: fork-lift trucks, agricultural and construction machines and others. HKU.../5U is a steering unit at which the ports and L in neutral position are connected to the drain line. his scheme contributes for the fast discharge of the residual pressure in lines L and, that usually is locked when the steering wheel is jerky released at neutral position. hese steering units do not drive directly the steering cylinders, but they are connected to hydraulic systems in which they drive the flow amplifiers or other devices. M+S Hydraulic produces steering units type HKUS.../5E(5E) which have additional EL-port. An electro-hydraulic relay can be mounted on this port, providing control of the hydraulic system.he relay can be pre-set to normally - open (N.O) or normally - closed (N.) contacts, with control range from 0,1 to 50 bars. HKUS /5D(D)... is a new generation steering unit, where the dynamic flow to LS-line allows easy and smooth control when starting the steering. Main features are: Low torque of the steering wheel 0,5 2,0 Nm [ lb-in] at normal operating conditions; High steering speed, limited only by the operating flow and the pressure of the supplying pump. onstant oil flow to LS-line at neutral position within 0,45 0,9 lpm [ GM]. he unit works in a system with a dynamic priority valve and is appropriate for machines with increased energy saving requirements. *For operation in condition of hermal Shock see the notes on page 6. L ipe Mounting L Modulary Mounting EL LS LS Static Signal - HKUS.../5 Dynamic Signal - HKUS.../5D Static Signal - HKUS.../5E L L EL L LS L LS Static Signal - HKUS.../5 Dynamic Signal - HKUS.../5D Static Signal - HKUS.../5E LS LS Static Signal - HKU.../5 Static Signal - HKU.../5U 19

HYDRAULIC MOTOR-BRAKE B/MR

HYDRAULIC MOTOR-BRAKE B/MR HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22

More information

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS

More information

» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;

» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries; HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS

More information

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries. HYDRAULIC MP APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS

More information

HYDRAULIC MOTORS EPRM

HYDRAULIC MOTORS EPRM HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS

More information

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries. HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification

More information

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS

More information

Planetenmotor Serie MP

Planetenmotor Serie MP Planetenmotor Serie MP Bestellnr. Typ Code - Planetenmotor 25ccm-W:Ø25-HD MP25CD -5 Planetenmotor 2ccm-W:Ø25-HD MP2CD -1 Planetenmotor 9,7ccm-W:Ø25-HD MP4CD -115 Planetenmotor 49,5ccm-W:Ø25-HD MP5CD -1

More information

SPOOL VALVE HYDRAULIC MOTORS

SPOOL VALVE HYDRAULIC MOTORS SPOOL VALVE HYDRAULIC The operating principle of the motors is based on an internal gear design, consisting of a stator and rotor through which the output torque and speed are transmitted. The distributor

More information

HYDRAULIC MOTORS HP APPLICATION GENERAL. » Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines

HYDRAULIC MOTORS HP APPLICATION GENERAL. » Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines HYDRAULIC HP APPLICAION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» extile machines» Agricultural machines» Food industries» Grass cutting machinery etc. CONENS Specification

More information

HYDRAULIC MOTORS EPMT

HYDRAULIC MOTORS EPMT HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS

More information

HYDRAULIC MOTORS MLHH

HYDRAULIC MOTORS MLHH HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification

More information

» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;

» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries; HYDRAULIC HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery

More information

HYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS

HYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...

More information

SPECIAL HYDRAULIC MOTORS AND MOTOR-BRAKES

SPECIAL HYDRAULIC MOTORS AND MOTOR-BRAKES SPECIAL HYDRAULIC AND MTRBRAKES CNTENTS Page Hydraulic Motors Series HP... Hydraulic Motors Series HR...11 Hydraulic Motors Series MLHRW...1 Hydraulic Motors Series...2 Hydraulic Motorbrakes Series BHR...3

More information

HYDRAULIC MOTORS EPMS

HYDRAULIC MOTORS EPMS HYDRAULIC EPMS APPLICATION» Conveyors;» Metal working machines;» Machines for agriculture;» Road building machines;» Mining machinery;» Food industries;» Special vehicles etc. CONTENTS Specification data...

More information

HYDRAULIC MOTORS EPMS - series 3

HYDRAULIC MOTORS EPMS - series 3 HYDRAULIC EPMS - series APPLICATION» Conveyors» Metal working machine» Machines for agriculture» Road building machines» Mining machinery» Food industries» Special vehicles etc. CONTENTS Specification

More information

UŽSISAKYK internetu - el. paštu - telefonu

UŽSISAKYK internetu -  el. paštu - telefonu HYDRAULIC UŽSISAKYK internetu - www.dominga.lt/eshop el. paštu - info@dominga.lt telefonu - +70 52 2221 APPLICATION»»»»» Conveyors Textile machines» Mining machinery Machine tools Ventilators Construction

More information

HEAVY DUTY HYDRAULIC MOTORS

HEAVY DUTY HYDRAULIC MOTORS HEAVY DUTY HYDRAULIC MTRS CNTENTS Page Hydraulic Motors Series MSWM... 4 Hydraulic Motors Series MTK... 8 Hydraulic Motors Series MTM... 17 Hydraulic Motors Series TMF... 9 Hydraulic Motors Series MVM...

More information

HEAVY DUTY HYDRAULIC MOTORS

HEAVY DUTY HYDRAULIC MOTORS HEAVY DUY HYDRAULIC MRS CNENS Page Hydraulic Motors Series MLHSEM... 4 Hydraulic Motors Series MK... 8 Hydraulic Motors Series MLHM... 17 Hydraulic Motors Series MF... 9 Hydraulic Motors Series MVM...

More information

HYDRAULIC MOTORS EPM. Cutaway of EPM Motor. Cutaway of EPMN Motor. EPM, EPMW(N) Series with Check Valves A. EPM 25, 32, 40 Series without Check Valves

HYDRAULIC MOTORS EPM. Cutaway of EPM Motor. Cutaway of EPMN Motor. EPM, EPMW(N) Series with Check Valves A. EPM 25, 32, 40 Series without Check Valves HYDRAULIC EPM The series of EPM motors have a low speed, high torque capability. Converting hydraulic energy into mechanical energy they are used where the power up to 11 kw is needed. These units provide

More information

HYDRAULIC DISC BRAKES LB, LBS, LBV- Wet

HYDRAULIC DISC BRAKES LB, LBS, LBV- Wet HYRAULI IS S LB, LBS, LBV- Wet APPLIAION» Heavy uty machinery» Wheel drives» Material handling» Mining» Agricultural machines» onveyors» oor openers and swing drives etc. GENERAL Fluid type O O emperature

More information

HYDRAULIC MOTORS INDEX HYDRAULIC MOTORS. APPLICATION SPECIFICATION AND GENERAL INFORMATION. General-01 General-02

HYDRAULIC MOTORS INDEX HYDRAULIC MOTORS. APPLICATION SPECIFICATION AND GENERAL INFORMATION. General-01 General-02 HYDRAULIC MOTORS INDEX HYDRAULIC MOTORS MOTOR TYPE OM.. OM-1 OM- MOTOR TYPE OP.. OP-1 OP-17 MOTOR TYPE OP..NA... OP..NA-1 OP..NA- MOTOR TYPE OZ.. OZ-1 OZ-2 MOTOR TYPE OR.. OR-1 OR-17 MOTOR TYPE OK.. OK-1

More information

DISC VALVE HYDRAULIC MOTORS

DISC VALVE HYDRAULIC MOTORS LHS LH LHV DISC VALVE HYDRAULIC CONENS Page Hydraulic otors Series LHS... 4 Hydraulic otors Series LH... 2 Hydraulic otors Series LHV... 9 Hydraulic otors Series LHHW... 1 otor Special Features... 7 otors

More information

HYDRAULIC MOTORS GENERAL INFORMATION

HYDRAULIC MOTORS GENERAL INFORMATION GENERAL INFORMATION MGL... Document: HM-1-Dec 2012 Applications: -Agricultural harvesters and seeders -Conveyors -Machine tools -Food industries -Turn equipment -Brush drivers -Sweepers and floor polishers

More information

HYDRAULIC DISC BRAKES LB, LBS, LBV- Wet

HYDRAULIC DISC BRAKES LB, LBS, LBV- Wet HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature

More information

ACCESSORIES CONTENTS. HYDRAULIC DISC BRAKE for MP, MR and MS type LB/

ACCESSORIES CONTENTS. HYDRAULIC DISC BRAKE for MP, MR and MS type LB/ ESSORIES ONTENTS age HYDRULI DIS RKE for M, MR and MS type L/288... 3 HYDRULI DIS RKE for MSS type LS/289(290) and MSV type LV/289(290)... 6 HYDRULI DIS RKE for MTS type LS/314(315) and MTV type LV/314(315)...

More information

TPF 60 (36,16 49,94 cm³/rev.)

TPF 60 (36,16 49,94 cm³/rev.) HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

HYDROSTATIC STEERING UNITS TYPE XY.../1, 2

HYDROSTATIC STEERING UNITS TYPE XY.../1, 2 HYDOSIC SEEING UNIS YE XY.../1, 2 he +S Hydraulic Hydrostatic Steering units are used in low-speed vehicles which driving speed does not exceed 6 km/h - such as: building machines, fork-lift trucks, harvesting

More information

TMF 600 ( cm³/rev.)

TMF 600 ( cm³/rev.) HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

HYDRAULIC DISC BRAKES LB, LBS, LBV- Wet

HYDRAULIC DISC BRAKES LB, LBS, LBV- Wet HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature

More information

CONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...

CONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50... CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29

More information

OMP Hydraulic Motor Versions

OMP Hydraulic Motor Versions Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X

More information

Gear Pump Model G4, Series 2X

Gear Pump Model G4, Series 2X s 40 to 100 Gear ump Model G4, Series 2X 3000 SI (210 bar) 6.1 in 3 (100 cm 3 ) 10 042/03.95 10 042/03.95 eplaces: 01.91 SE connection flanges Sleeve bearings for long life Single block bearings ISO or

More information

HYDROSTATIC STEERING UNITS AND ACCESSORIES

HYDROSTATIC STEERING UNITS AND ACCESSORIES HYDOSIC SEEING UNIS ND CCESSOIES CONENS age Hydrostatic Steering Units ype XY.../1, 2... Hydrostatic Steering Units ype HKU.../, 4...5 Hydrostatic Steering Units ype HKU.../7...6 Hydrostatic Steering Units

More information

C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11

C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11 C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic

More information

US version. Drain connection

US version. Drain connection Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT

More information

Spool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.

Spool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool

More information

Steering unit. RE 14365/10.07 Replaces: Type LAGC. Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min

Steering unit. RE 14365/10.07 Replaces: Type LAGC. Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min Steering unit E 14365/10.07 eplaces: 07.03 1/12 ype AGC Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min H6211_d able of contents Content age Features 1 Ordering

More information

RA / Radial Piston Motor Model MR, MRE Fixed Displacement. Table of Contents. Replaces: RA /10.95

RA / Radial Piston Motor Model MR, MRE Fixed Displacement. Table of Contents. Replaces: RA /10.95 Radial Piston Motor Model MR, MRE Fixed Displacement Sizes 160 to 9500 6100 PSI (up to 420 bar) 582 in 3 (up to 9542 cm 3 ) 25,075 lb-ft (up to 34000 Nm) RA 15 228/10.95 Replaces: 12.94 Wide range of displacements

More information

Spool Valve Hydraulic Motors Series J

Spool Valve Hydraulic Motors Series J Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port

More information

J Series (129-) Highlights

J Series (129-) Highlights Highlights Features: Constant clearance Geroler set Integrated check valves Thrust Bearing Bushing Port B Port A Self-lubricating shaft bushing High-strength rigid components Increased valve seal lands

More information

Priority valve Type LPS

Priority valve Type LPS RE 27 548/10.98 riority valve Type LS Nominal sizes 40 to 160 Series 1X Nominal pressure 250 bar Maximum flow 160 L/min. H/AD/5977/98 riority valve type LS... Contents Description age Features 1 Ordering

More information

OMEW Hydraulic Motor Versions

OMEW Hydraulic Motor Versions Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X

More information

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact

More information

TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E

TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

Truck Hydraulics. Serie VP1 Variable Displacement Pumps

Truck Hydraulics. Serie VP1 Variable Displacement Pumps ruck Hydraulics Variable Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Pump and line

More information

High Torque Low Speed Motors MR - MRE

High Torque Low Speed Motors MR - MRE High Torque Low Speed Motors MR - MRE Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350

More information

ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m

ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4

More information

6.3 SIZE 2. Ordering Code External Gear Pump

6.3 SIZE 2. Ordering Code External Gear Pump 6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration

More information

Monoblock Directional Control Valve HDM11S/3PQ

Monoblock Directional Control Valve HDM11S/3PQ Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3

More information

Fixed Displacement Motor A2FM

Fixed Displacement Motor A2FM rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97

More information

VINCKE HYDRAULIC PUMPS

VINCKE HYDRAULIC PUMPS : VNK BA10VS 21 Variable displacement axial piston pump of swashplate design for hydraulic open circuit systems. Flow is proportional to drive speed and displacement. It can be infinitely varied by adjustment

More information

SCM M2. Other advantages:

SCM M2. Other advantages: Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical

More information

IFP BMG HIGH TORQUE LOW SPEED MOTORS

IFP BMG HIGH TORQUE LOW SPEED MOTORS IFP BMG HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International BMG motors provide high output torque from an efficient compact design.motors are available with displacements

More information

À cylindrée fixe Gamme MAP 50

À cylindrée fixe Gamme MAP 50 pplications Moteur à pistons axiaux M+S À cylindrée fixe Gamme MP Cylindrée de 6,6 à cm Vitesse de rotation maxi de tmin Couple maxi danm Puissance maxi 6 Kw ébit d huile maxi : 9 lmin Charge axiale maxi

More information

SCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor

More information

Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Hydraulic Motors: h y d r a u l i c s

Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Hydraulic Motors: h y d r a u l i c s H y d r a u l i c s ydraulics Char-Lynn Hydraulic Motors: http://www.charlynn.com 00--0 h y d r a u l i c s General Purpose Motors We Manufacture No. - October 1 Solutions S o l u t i o n s Features Integrated

More information

Series 20 Axial Piston Pumps. Technical Information

Series 20 Axial Piston Pumps. Technical Information Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss

More information

Orbital Motors OMS, OMT and OMV Orbital Motors

Orbital Motors OMS, OMT and OMV Orbital Motors MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted

More information

Orbital Motors Type OMP, OMR and OMH. Technical Information

Orbital Motors Type OMP, OMR and OMH. Technical Information Orbital Motors Type OMP, OMR and OMH Technical Information OMP, OMR and OMH A Wide Range of Hydraulics Motors F 301 245 A Wide Range of Hydraulic Motors Sauer-Danfoss is a world leader within production

More information

MOTOR SCM M2

MOTOR SCM M2 MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.

More information

Fixed Displacement Motor AA2FM (A2FM)

Fixed Displacement Motor AA2FM (A2FM) Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400

More information

MOTOR SCM ISO

MOTOR SCM ISO MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results

More information

Series TMM Axial Piston Motor. Technical Information

Series TMM Axial Piston Motor. Technical Information Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer

More information

Series 20 Axial Piston Pumps. Technical Information

Series 20 Axial Piston Pumps. Technical Information Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss

More information

Low Speed High Torque Motors

Low Speed High Torque Motors Low Speed High Torque Motors Catalogue HY29-0503/UK TABLE OF CONTENTS Table of contents Features General information Functional description Technical data 3 4 4 5 6 FRAME SIZE P Operating diagrams Overall

More information

External gear pump Series G

External gear pump Series G External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps

More information

Fixed Displacement Pump A2FO

Fixed Displacement Pump A2FO RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95

More information

Flow sharing control block in mono block / sandwich plate design M6-15

Flow sharing control block in mono block / sandwich plate design M6-15 Flow sharing control block in mono block / sandwich plate design M6-15 RE 64321 Edition: 01.2015 Replaces: 05.2012 Size 15 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420

More information

OML and OMM Orbital motors. Technical Information

OML and OMM Orbital motors. Technical Information OML and OMM Orbital motors Technical Information OML and OMM A wide range of orbital motors F300030.TIF A WIDE RANGE OF ORBITAL MOTORS Sauer-Danfoss is a world leader within production of low speed orbital

More information

7/8-14 SAE 1/2" NPT 1/2" BSP Flange Mount BMG 98 BMG 61 BMG 76

7/8-14 SAE 1/2 NPT 1/2 BSP Flange Mount BMG 98 BMG 61 BMG 76 IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from

More information

CAST IRON GEAR PUMPS AND MOTORS Dolomites Group 3 l Technical Information

CAST IRON GEAR PUMPS AND MOTORS Dolomites Group 3 l Technical Information CAST ION GEA PUMPS AND MOTOS Dolomites Group 3 l Technical Information 2 dolomites 3 I TECHNICA INFOMATION History of revisions Date Page Changed ev. March 2015 - First edition - September 2016 - Second

More information

GM SERIES TECHNICAL CATALOG. Crankshaft Design Radial Piston Hydraulic Motors

GM SERIES TECHNICAL CATALOG. Crankshaft Design Radial Piston Hydraulic Motors www.saihyd.com info@saihyd.com Crankshaft Design Radial Piston Hydraulic Motors GM SERIES TECHNICAL CATALOG CONTENTS PAGE Motor Displacement Table 2 Motor Characteristics & Technical Data 3 GM05 Series

More information

XCEL80 Steering Control Units

XCEL80 Steering Control Units XCEL80 Steering Control Units XCEL80 Steering Unit SEPECIFICATION DATA Max. System Pressure 175 bar [2537 psi] Max. Back Pressure 21 bar [305 psi] Rated Flow 75 LPM [20 GPM] Input Torque Powered 1.3-2.4

More information

Flow sharing control block in mono block / sandwich plate design M6-22

Flow sharing control block in mono block / sandwich plate design M6-22 Flow sharing control block in mono block / sandwich plate design M6-22 RE 64322 Edition: 01.2015 Replaces: 05.2012 Size 22 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420

More information

Eaton Char-Lynn Spool Valve Hydraulic Motors

Eaton Char-Lynn Spool Valve Hydraulic Motors B-5 Eaton Char-Lynn Spool Valve Hydraulic Motors Spool Valve: J, H, S, T, W Series B-1 B-3 B-4 Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i

More information

S Series (103-) Highlights B-3. Description. Specifications

S Series (103-) Highlights B-3. Description. Specifications Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet, return and

More information

Monoblock directional control valves DL - Directional control valve

Monoblock directional control valves DL - Directional control valve Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal

More information

Vane motor high performance hydraulic series M5B - M5BS - M5BF

Vane motor high performance hydraulic series M5B - M5BS - M5BF Vane motor high performance hydraulic series M5B - M5BS - M5BF Publ. 2 - AM172 - B 1 / 25 / FB Replaces : 2 - AM172 - A L11-2172 - 2 CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12 vanes and a patented

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar

More information

Gear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs

Gear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Table

More information

YMTE SPECIFICATION DATA

YMTE SPECIFICATION DATA SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Plug-In Motor 2FE RE 9008/03.97 replaces 04.96

More information

Axial Piston Variable Pump A15VSO

Axial Piston Variable Pump A15VSO Axial iston Variable ump A15VSO RE 928/5.12 1/4 Replaces: 3.1 Data sheet Series 1 Sizes 175 to 28 Nominal pressure 35 bar Maximum pressure 42 bar Open circuit Contents Ordering code for standard program

More information

Mobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement

Mobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing

More information

External Gear Pumps Series F

External Gear Pumps Series F External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single

More information

Hydraulic Pump VP1-120

Hydraulic Pump VP1-120 REECHSROY GROUP REECHNOLOGY Bulgaria, Varna 9000 Industrial Zone Str. Studentska 1 U/UK1 odernization, complex repair and maintenance of heavy industrial equipment. Infrastructure construction and management

More information

5.2 MEDIUM HEAVY DUTY SERIES SIZE 3

5.2 MEDIUM HEAVY DUTY SERIES SIZE 3 .2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6

More information

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact

More information

Fixed Plug-In Motor A2FE

Fixed Plug-In Motor A2FE Fixed Plug-In Motor 2FE RE 91 008/09.07 1/16 Replaces: 04.05 echnical data sheet Series 6 Sizes Nominal pressure/peak pressure 28 to 180 400/450 bar 250 and 355 350/400 bar Open and closed circuits Contents

More information

S Series (103-) Highlights

S Series (103-) Highlights S Series (-) Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet,

More information

RE / Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW. Hydraulik Nord. Contents 1/26

RE / Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW. Hydraulik Nord. Contents 1/26 RE14 6/3.96 Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW RE 14 6/3.96 Standard motor type GMS Standard motor type GMT Short motor type GMTS Contents Name page Characteristics,

More information

TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E

TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

TMVW Orbital Motors. Technical Information

TMVW Orbital Motors. Technical Information Orbital Motors Technical Information A Wide Range of Orbital Motors A Wide Range of Orbital Motors F300030 Tif Sauer-Danfoss is a world leader within production of low speed orbital motors with high torque.

More information

UŽSISAKYKITE internetu telefonu el. paštu

UŽSISAKYKITE internetu  telefonu el. paštu Features Axial piston pump MA10VO in swashplate design is used in open loop circuits. Flow is proportional to drive speed and displacement. By adjusting the position of the swashplate it is possible to

More information

External Gear Pumps Series F

External Gear Pumps Series F External Gear Pumps Series F AZPF-... Fixed pumps V = 4.0...28 cm 3 /rev Overview of contents ontents Page General 2 Product overview 3 single pumps 4 multiple pumps 5 rive shaft 6 Front cover 7 Line ports

More information

External Gear Pumps Series F

External Gear Pumps Series F External Gear Pumps Series F RE 10 089/02.07 Replaces: Series F Issue 04.04 AZPF-... Fixed pumps V = 4.0...28 cm 3 /rev Overview of contents ontents Page General 2 Product overview 3 single pumps 4 multiple

More information

OMEW Standard and with Low Speed Option. Orbital Motors. Technical Information

OMEW Standard and with Low Speed Option. Orbital Motors. Technical Information Standard and with Low Speed Option Orbital Motors Technical Information Contents Revision History Table of Revisions Date Page Changed Rev Jan 2009 Many major change BA Mar 2010 16 Japan location BB Contents

More information