UŽSISAKYK internetu - el. paštu - telefonu
|
|
- Aldous Miles
- 6 years ago
- Views:
Transcription
1 HYDRAULIC UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu APPLICATION»»»»» Conveyors Textile machines» Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams Dimensions and mounting... 9 Shaft extensions Permissible shaft loads Order code GENERAL Displacement, [cm /rev.] Max. Speed, [RPM] Max. Torque, [danm] Max. Output, [kw] Max. Pressure Drop, [bar] Max. Oil Flow, [l/min] Min. Speed, [RPM] Pressure fluid O Temperature range, [C] 2 Optimal Viscosity range, [mm /s] Filtration OPTIONS» Model- Spool valve, gerotor» With or without flange» Side and rear ports» Series with pressure valve(s)» Shafts- straight and splined» Metric and BSPP ports» Speed sensoring; 8, ,1,5 1,8 2, Mineral based- HLP(DIN 5152) or HM(ISO 67/) ISO code /16 (Min. recommended fluid filtration of micron) P Series with Integrated Internal Crossover Relief Valve A B, p= bar ( bar) A P Series with Integrated Internal Crossover Relief Valve B A, p= bar ( bar) A B B P bar Pressure Losses D Series with Integrated Internal Crossover Relief Valves A B, p= bar ( bar) A Q, l/min B
2 UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu SPECIFICATION DATA Type 8 12,5 2 0 Displacement [cm /rev.] Max. Speed, [RPM] Max. Torque [danm] cont. cont. peak** Max. Output [kw] Max. Pressure Drop [bar] cont. cont. peak** Max. Oil Flow [l/min] Max. Inlet Pressure, [bar] cont cont. Max. Return Pressure peak** cont. 0- RPM w/o Drain Line or cont. -00 RPM Max. Pressure in cont RPM Drain Line, [bar] cont. >800 RPM 0-max. RPM Max. Return Pressure with Drain Line [bar] cont. peak** Max. Starting Pressure with Unloaded Shift, [bar] Min. Starting Torque [danm] at max. press. drop cont. at max. press. drop Min. Speed***, [RPM] Weight, avg. [kg] F(S) FS P PF D DF 8, ,1 1,5 2,1 1,8 2, ,7 1,0 1,9 2, 2,7 2,5 2,7 2,6 2, ,6 2,, 2,,2 0 1,2 1, , 2,8 2,6 2,8 2, ,5,5 5,1 2,,2 0 2,1 0 2,1 2,5 2,7 2,8,0 1, ,7 6, 2,,2 0 -,,8 0 2,2 2,6,0 2,8,0, ,1 5,7 6,6 1,8, ,,6 2, 2,7,1,1,0,2 00 0,5 5,8 8 1,7 2, ,7,8 2,5,,1,,2, * Intermittent operation: the permissible values may occur for max. 10% of every minute. ** Peak load: the permissible values may occur for max. 1% of every minute. *** For speeds of 0 RPM or lower, consult factory or your regional manager. 1. Intermittent speed and intermittent pressure drop must not occur simultaneously. 2. Recommended filtration is per ISO cleanliness code /16. A nominal filtration of micron or better.. Recommend using a premium quality, anti-wear type mineral based hydraulic oil HLP(DIN5152) or HM (ISO 67/). If using synthetic fluids consult the factory for alternative seal materials. 0. Recommended minimum oil viscosity 1 mm²/s at operating temperature C. 5. Recommended maximum system operating temperature is 82ºC. 6. To assure optimum motor life fill with fluid prior to loading and run at moderate load and speed for 15-0 min. 5
3 Motoren UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu FUNCTION DIAGRAMS 8 12,5 The function diagrams data was collected at back pressure 5 10 bar and oil with viscosity of 2 mm²/s at C. 6
4 UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu FUNCTION DIAGRAMS 2 The function diagrams data was collected at back pressure 5 10 bar and oil with viscosity of 2 mm²/s at C. 7
5 UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu FUNCTION DIAGRAMS 0 The function diagrams data was collected at back pressure 5 10 bar and oil with viscosity of 2 mm²/s at C. 8
6 UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu DIMENSIONS AND MOUNTING DATA max L Port A Porting Rear Ports Port B Mounting Port A Three Bolts Mount Port B 5,±0,1 S -SidePorts max L 5±0,2 Port A Port B 11,7±0, F - Oval Mount (2 Holes) P -SidePortswith Single Crossover Relief Valve max L Port A Port B 21,2±0,15 D -SidePortswith Dual Crossover Relief Valve max L C P T (A, B) : xm6-12 mm depth :2xG/8or(M18x1,5)-12mmdepth :G1/8or(M10x1)-10mmdepth Port A Port B Standard Rotation Viewed from Shaft End Port A Pressurized - CW Port B Pressurized - CCW Reverse Rotation Viewed from Shaft End Port A Pressurized - CCW Port B Pressurized - CW 0,±0, Type 8 12,5 2 0 L,mm ,5 121,5 Type S 8 S12,5 S S 2 S 0 S L,mm ,5 122,5 Type P 8 P12,5 P P 2 P 0 P L,mm ,5 12,5 Type D 8 D12,5 D D 2 D 0 D L,mm ,5 151,5 L,mm 1,5 5,5 8,5 1,
7 SHAFT EXTENSIONS C - ø16 straight, Parallel key 5x5x16 DIN 6885 Max. Torque,9 danm 0, CK - ø1 Straight, Parallel key 5x5x16 DIN 6885 Max. Torque danm -0,018 UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu , * M6 min 11 Deep * M6 min 11 Deep SH - ø16,5 Splined, B17x1 DIN 582 Max. Torque, danm 0, * M6 min 11 Deep - Motor Mounting Surface * For F Mounting PERMISSIBLE SHAFT LOAD P a max =80 dan P =160 dan rad The permissible radial shaft load [Prad] is calculated from the distance [L] between the point of load application and the mounting surface: P = rad 600 n X 100 (61,5+L), [dan] P rad dan The drawing shows the permissible radial load when L= mm. If the calculated shaft load exceeds the permissible, a flexible coupling must be used. 10
8 UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu ORDER CODE Pos.1 - Adjustment Option omit - without valve P -Side ports with single crossover relief valve D -Side ports with dual crossover relief valve Pos.2 - Mounting Flange omit - Three bolts mount F -Oval mount, two holes Pos. - Port type (not valid for P and D version) omit - Rear ports S - Side ports Pos. - Displacement code 8-8,2 [cm /rev] 12,5-1 [cm /rev] -,0[cm /rev] 2-1,8[cm /rev] 0-0,0[cm /rev] -,0[cm /rev] Pos. 6 - Ports omit - BSPP (ISO 228) M - Metric (ISO 262) Pos. 7 - Line to controled ** (see page ) /L - B A (left running) /R - A B (right running) Pos. 8 - Valve Rated Pressure *** / / - p= bar - p= bar Pos. 9 - Special Features (see page 6) Pos.10 - Design Series omit - Factory specified Pos. 5 - Shaft Extensions* C - ø16 straight, Parallel key 5x5x16 DIN 6885 VC - ø16 straight, Parallel key 5x5x16 DIN 6885 with corrosion resistant bushing CK - ø1 straight, Parallel key 5x5x16 DIN 6885 SH - ø16,5 splined, B17x1 DIN 582 NOTES: * The permissible output torque for shafts must not be exceeded! ** For P option useful only. *** For P and D option useful only. The hydraulic motors are mangano-phosphatized as standard. F - FLANGE KIT (2 Holes) Order No: Flange Kit includes screws - M6x1 for attaching flange to the motor. 11
9 UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu HYDRAULIC MP APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS Specification data Function diagrams Dimensions and mounting Wheel motor... 2 Shaft extensions... 2 Permissible shaft loads... Permissible shaft Seal Pressure Order code OPTIONS» Model- Spool valve, gerotor» Flange and wheel mount» Motor with needle bearing» Side and rear ports» Shafts- straight, splined and tapered» Shaft seal for high and low pressure» Metric and BSPP ports» Speed sensoring» Other special features GENERAL Displacement, [cm /rev.] Max. Speed, [RPM] Max. Torque, [danm] Max. Output, [kw] Max. Pressure Drop, [bar] Max. Oil Flow, [l/min] Min. Speed, [RPM] Pressure fluid O Temperature range, [C] 2 Optimal Viscosity range, [mm /s] Filtration 62, ,, 10, Mineral based- HLP(DIN 5152) or HM(ISO 67/) ISO code /16 (Min. recommended fluid filtration of micron) Pressure drop (bar) Oil flow in drain line Viscosity 2 (mm /s) 5 5 Oil flow in drain line (l/min) 2,5 1,8,5 2,8 Pressure Losses p bar Q l/min 12
10 UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu MOTOR SPECIAL FEATURES Special Feature Description Motor for Speed Sensor* Low Leakage Low Speed Valving Free Running Reverse Rotation Paint** Corrosion Protected Paint** Order Code RS LL LSV FR R P PC Motor type MP MPN MPW MR MRN MH O O - - O - O O O - O O - O O O - O O - O O O - O O - O O O O O O O O O O O O O O O O O O O O O O O - S Check Valves S S*** S S S*** S S Optional Not applicable Standard * for sensor ordering see pages 7-8 ** color at customer's request. *** without check valves for "U" shaft seal versions (see page 26) 6
11 UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu WITH SPEED SENSOR...RS 26,5 M12x max 92 MP...RS and MR...RS max 6 max 2 for Q-flange M12x ,5 MH...RS max 10,7 M12x1 7
12 SPEED SENSOR UŽSISAKYK internetu - el. paštu - info@dominga.lt telefonu TECHNICAL DATA OF THE SPEED SENSOR Technical data Output signal Frequency range Output Power supply Current input Current load Ambient Temperature Protection Plug connector Mounting principle Hz PNP, NPN VDC ma (@2 VDC) 0 0 ma (@2 VDC;2 C) 0 minus 0... plus 1 C IP 67 M12-Series ISO 619 U high>ud.c. -2V U <2V low U f 1 f 2 f 1=f 2±10% Load max.:i high=i low<ma No load current, max: ma f Motor type Pulses per revolution MP MR MH Wiring diagrams PNP NPN R =U /I (=ma) Load d.c. max Stick type Order Code for Speed Sensor 1 2 Terminal No. 1 2 Connection U d.c. No connection 0V Output signal Cable Output Brown White Blue Black Sensor Code Output type RSN NPN RSP PNP PSNL5 NPN RSPL5 PNP Electric connection Connector BINDER 71 series Connector BINDER 71 series Cable output x0,; 5m long Cable output x0,; 5m long NOTE: *- The speed sensor is not fitted at the factory, but is supplied in a plastic bag with the motor. For installation see enclosed instructions. 8
HYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS
HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...
More informationSPOOL VALVE HYDRAULIC MOTORS
SPOOL VALVE HYDRAULIC The operating principle of the motors is based on an internal gear design, consisting of a stator and rotor through which the output torque and speed are transmitted. The distributor
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MP APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationHYDRAULIC MOTORS EPMS - series 3
HYDRAULIC EPMS - series APPLICATION» Conveyors» Metal working machine» Machines for agriculture» Road building machines» Mining machinery» Food industries» Special vehicles etc. CONTENTS Specification
More informationPlanetenmotor Serie MP
Planetenmotor Serie MP Bestellnr. Typ Code - Planetenmotor 25ccm-W:Ø25-HD MP25CD -5 Planetenmotor 2ccm-W:Ø25-HD MP2CD -1 Planetenmotor 9,7ccm-W:Ø25-HD MP4CD -115 Planetenmotor 49,5ccm-W:Ø25-HD MP5CD -1
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More informationHYDRAULIC MOTORS EPRM
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery
More informationHYDRAULIC MOTORS EPMT
HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS
More informationHYDRAULIC MOTOR-BRAKE B/MR
HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22
More informationHYDRAULIC MOTORS INDEX HYDRAULIC MOTORS. APPLICATION SPECIFICATION AND GENERAL INFORMATION. General-01 General-02
HYDRAULIC MOTORS INDEX HYDRAULIC MOTORS MOTOR TYPE OM.. OM-1 OM- MOTOR TYPE OP.. OP-1 OP-17 MOTOR TYPE OP..NA... OP..NA-1 OP..NA- MOTOR TYPE OZ.. OZ-1 OZ-2 MOTOR TYPE OR.. OR-1 OR-17 MOTOR TYPE OK.. OK-1
More informationHYDRAULIC MOTORS EPMS
HYDRAULIC EPMS APPLICATION» Conveyors;» Metal working machines;» Machines for agriculture;» Road building machines;» Mining machinery;» Food industries;» Special vehicles etc. CONTENTS Specification data...
More informationHYDRAULIC MOTORS HP APPLICATION GENERAL. » Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines
HYDRAULIC HP APPLICAION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» extile machines» Agricultural machines» Food industries» Grass cutting machinery etc. CONENS Specification
More informationSPECIAL HYDRAULIC MOTORS AND MOTOR-BRAKES
SPECIAL HYDRAULIC AND MTRBRAKES CNTENTS Page Hydraulic Motors Series HP... Hydraulic Motors Series HR...11 Hydraulic Motors Series MLHRW...1 Hydraulic Motors Series...2 Hydraulic Motorbrakes Series BHR...3
More informationHEAVY DUTY HYDRAULIC MOTORS
HEAVY DUTY HYDRAULIC MTRS CNTENTS Page Hydraulic Motors Series MSWM... 4 Hydraulic Motors Series MTK... 8 Hydraulic Motors Series MTM... 17 Hydraulic Motors Series TMF... 9 Hydraulic Motors Series MVM...
More informationHEAVY DUTY HYDRAULIC MOTORS
HEAVY DUY HYDRAULIC MRS CNENS Page Hydraulic Motors Series MLHSEM... 4 Hydraulic Motors Series MK... 8 Hydraulic Motors Series MLHM... 17 Hydraulic Motors Series MF... 9 Hydraulic Motors Series MVM...
More informationHYDRAULIC MOTORS EPM. Cutaway of EPM Motor. Cutaway of EPMN Motor. EPM, EPMW(N) Series with Check Valves A. EPM 25, 32, 40 Series without Check Valves
HYDRAULIC EPM The series of EPM motors have a low speed, high torque capability. Converting hydraulic energy into mechanical energy they are used where the power up to 11 kw is needed. These units provide
More informationHydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified
SOOL VALVE HYDAULI MOOS Quality assured company - ISO 9001 ertified SOOL VALVE - he distributor valve has been integrated with the output shaft. he valve has hydrodynamic bearings, and has infinite life
More informationHYDRAULIC MOTORS GENERAL INFORMATION
GENERAL INFORMATION MGL... Document: HM-1-Dec 2012 Applications: -Agricultural harvesters and seeders -Conveyors -Machine tools -Food industries -Turn equipment -Brush drivers -Sweepers and floor polishers
More informationCONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationDISC VALVE HYDRAULIC MOTORS
LHS LH LHV DISC VALVE HYDRAULIC CONENS Page Hydraulic otors Series LHS... 4 Hydraulic otors Series LH... 2 Hydraulic otors Series LHV... 9 Hydraulic otors Series LHHW... 1 otor Special Features... 7 otors
More informationTMF 600 ( cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRAULI IS S LB, LBS, LBV- Wet APPLIAION» Heavy uty machinery» Wheel drives» Material handling» Mining» Agricultural machines» onveyors» oor openers and swing drives etc. GENERAL Fluid type O O emperature
More informationOMP Hydraulic Motor Versions
Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationHYDRAULIC MOTORS MH APPLICATION GENERAL. » Agriculture machines» Food industries» Mining machinery etc. » Conveyors
HYDRAULIC APPLICATION» Coveyors» Feedig mechaism of robots ad maipulators» etal workig machies» Textile machies» Agriculture machies» Food idustries» iig machiery etc. CONTENTS Specificatio data... 77
More informationOMEW Hydraulic Motor Versions
Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationSpool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.
Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationSpool Valve Hydraulic Motors Series J
Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationJ Series (129-) Highlights
Highlights Features: Constant clearance Geroler set Integrated check valves Thrust Bearing Bushing Port B Port A Self-lubricating shaft bushing High-strength rigid components Increased valve seal lands
More informationÀ cylindrée fixe Gamme MAP 50
pplications Moteur à pistons axiaux M+S À cylindrée fixe Gamme MP Cylindrée de 6,6 à cm Vitesse de rotation maxi de tmin Couple maxi danm Puissance maxi 6 Kw ébit d huile maxi : 9 lmin Charge axiale maxi
More informationACCESSORIES CONTENTS. HYDRAULIC DISC BRAKE for MP, MR and MS type LB/
ESSORIES ONTENTS age HYDRULI DIS RKE for M, MR and MS type L/288... 3 HYDRULI DIS RKE for MSS type LS/289(290) and MSV type LV/289(290)... 6 HYDRULI DIS RKE for MTS type LS/314(315) and MTV type LV/314(315)...
More informationFixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationRE / Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW. Hydraulik Nord. Contents 1/26
RE14 6/3.96 Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW RE 14 6/3.96 Standard motor type GMS Standard motor type GMT Short motor type GMTS Contents Name page Characteristics,
More informationVINCKE HYDRAULIC PUMPS
: VNK BA10VS 21 Variable displacement axial piston pump of swashplate design for hydraulic open circuit systems. Flow is proportional to drive speed and displacement. It can be infinitely varied by adjustment
More informationWide range of hydraulic motors & valves BM2 BM1 H PORT BM1 LINE PORT BM1 S PORT HMM BM4 BM3 WHEEL MOTOR MOTOR WITH SPEED SENSOR
Wide range of hydraulic motors & valves BM2 BM1 H PORT BM1 LINE PORT BM1 S PORT HMM BM4 BM3 WHEEL MOTOR MOTOR WITH SPEED SENSOR 4K BM5 BEARINGLESS BM5 BMT BM6 BEARINGLESS BM6 MOTOR BALANCE VALVE MOTOR
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single
More informationRE / Gerotormotors (Low Speed High Torque Motors) Type GMP, GMR, GMVD. Hydraulik Nord. Contents 1/32. Replaces:
Gerotormotors (Low Speed High Torque otors) Type GP, GR, GVD RE 14 7/3.96 RE 14 7/11.96 Replaces: 3.96 Characteristics: Very smooth running, even at low speeds Wide speed range Constant output torque over
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More information5.2 MEDIUM HEAVY DUTY SERIES SIZE 3
.2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6
More informationHigh Torque Low Speed Motors MR - MRE
High Torque Low Speed Motors MR - MRE Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationExternal gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationLow Speed High Torque Motors
Low Speed High Torque Motors Catalogue HY29-0503/UK TABLE OF CONTENTS Table of contents Features General information Functional description Technical data 3 4 4 5 6 FRAME SIZE P Operating diagrams Overall
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More informationHigh Torque Low Speed Motors MRT - MRTE - MRTF
High Torque Low Speed Motors MRT - MRTE - MRTF Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
More informationFixed Displacement Motor A2FM
rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97
More informationEaton Char-Lynn Low Speed, High Torque Motors. Orbit motor
Eaton Char-Lynn Low Speed, High Torque Motors Orbit motor Table of Contents Description Page No. H & S Series 3 Features 3 Model code 3 H Series 4-9 Specifications 4 Performance 5 Dimensions and mount
More informationFixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement
More informationAP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More information5.1 MEDIUM HEAVY DUTY SERIES SIZE 2
.1 MEDIUM HEAVY DUTY SERIES SIZE 2 CONTENTS PGI100 Ordering Code.1.1 Medium Heavy Duty Series Technical Information.1.2 Specifications.1.3 Hydraulic fluids.1.4 Viscosity range.1. Temperature range.1.6
More informationAxial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
More informationRA / Radial Piston Motor Model MR, MRE Fixed Displacement. Table of Contents. Replaces: RA /10.95
Radial Piston Motor Model MR, MRE Fixed Displacement Sizes 160 to 9500 6100 PSI (up to 420 bar) 582 in 3 (up to 9542 cm 3 ) 25,075 lb-ft (up to 34000 Nm) RA 15 228/10.95 Replaces: 12.94 Wide range of displacements
More informationFixed Displacement Motor AA2FM (A2FM)
Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400
More informationUŽSISAKYKITE internetu telefonu el. paštu
Features Axial piston pump MA10VO in swashplate design is used in open loop circuits. Flow is proportional to drive speed and displacement. By adjusting the position of the swashplate it is possible to
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationGear Motors. Series PGM Fixed Displacement Motors, Aluminium Designs
Gear Motors Series PGM Fixed Displacement Motors, Aluminium Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationHYDRAULICS VINCKE HYDRAULIC PUMPS
VINCKE HYDRAULIC PUMPS TECH-VHP200.1 index 3 link to your page / link a su página Gear pumps Introduction 3 Group 0 3 Group 1 3 Group 2 3 Group 3 4 6 7 12 18 Variable displacement pumps 21 Hand pumps 3
More informationMobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationVariable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
More informationFixed Displacement Pump A2FO
RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95
More informationExternal Gear Pumps Series F
External Gear Pumps Series F AZPF-... Fixed pumps V = 4.0...28 cm 3 /rev Overview of contents ontents Page General 2 Product overview 3 single pumps 4 multiple pumps 5 rive shaft 6 Front cover 7 Line ports
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RE 10 089/02.07 Replaces: Series F Issue 04.04 AZPF-... Fixed pumps V = 4.0...28 cm 3 /rev Overview of contents ontents Page General 2 Product overview 3 single pumps 4 multiple
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4)
Gerolor Motors S Series Size CC-A Flange Options-B Shaft Options-C Ports Features S S S S S S S S2 2 S31 31 S0 0 SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4) 1.0" Keyed (R) mm Keyed (A) 1.0'
More informationPVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
More informationAxial piston pumps type PVPC variable displacement, by a full line of mechanical controls
www.atos.com Table A600/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,
More informationS Series (103-) Highlights B-3. Description. Specifications
Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet, return and
More informationAxial Piston Fixed Pump A17FNO Series 10
Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with
More informationHYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta
More informationAxial piston fixed motor A2FM Series 70 A2FE Series 70
Axial piston fixed motor A2FM Series 70 A2FE Series 70 RE 91071 RE Edition: 910712.2015 Edition: Replaces 12.2015 03.2015 A2FMN, A2FEN (sizes 56 to 107): Nominal pressure 300 bar Maximum pressure 350 bar
More informationAxial Piston Variable Pump A4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump A4VG RE 92003/03.09 1/64 Replaces: 09.07 Data sheet Series 32 Sizes 28...250
More informationAxial Piston Variable Double Pump A8VO
Axial Piston Variable Double Pump A8VO RE 93010/03.09 1/40 Replaces: 11.07 Data sheet Series 61 / 63 Sizes 55...200 Nominal pressure 350 bar Peak pressure 400 bar for open circuit Contents Ordering Code
More informationAxial piston fixed motor A2FM series 70. Americas. RE-A Edition:
Axial piston fixed motor A2FM series 70 Americas RE-A 91071 Edition: 05.2015 A2FMN (Sizes 90 and 107): Nominal pressure 300 bar Maximum pressure 350 bar A2FMM (Sizes 80 and 90): Nominal pressure 400 bar
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES
BV FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BV SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationAxial Piston Fixed Pump A2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal
More information2.3 MEDIUM HEAVY DUTY SERIES
2 2.3 MEDIUM HEAVY DUTY SERIES CONTENTS PPV11 Ordering Code 2.3.1 Medium Heavy Duty Series 2.3.2 Torque limiter settings Technical Information 2.3.3 Specifications 2.3.4 Hydraulic fluids 2.3.5 Viscosity
More informationAxial Piston Variable Pump AA4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump AA4VG RA 92003-A/06.09 1/64 Replaces: 03.09 Data sheet Series 32 Size 28...
More informationFixed Displacement Motor A10FM A10FE
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service Fixed Displacement Motor 10FM 10FE RE 91 172/06.06 1/24 Replaces: 01.03 Technical Data Sheet Size 10...63
More informationAxial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
More informationAxial Piston Fixed Motor A2FNM for Fan Drives and Flywheel Mass
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FNM for Fan Drives and Flywheel Mass RE 91007/02.11 1/16 Data sheet Series 61
More information