RE / Gerotormotors (Low Speed High Torque Motors) Type GMP, GMR, GMVD. Hydraulik Nord. Contents 1/32. Replaces:
|
|
- Abigayle Atkinson
- 5 years ago
- Views:
Transcription
1 Gerotormotors (Low Speed High Torque otors) Type GP, GR, GVD RE 14 7/3.96 RE 14 7/11.96 Replaces: 3.96 Characteristics: Very smooth running, even at low speeds Wide speed range Constant output torque over a wide speed range High starting torque Robust design capable of withstanding tough operating conditions Favorable power-to-weight ratio Operation without a leakage oil line, even when exposed to high backflow pressures Can be connected in series Gerotormotors Type GR Contents Name page Characteristics 1 Functional description, applications, mode of action, variants 2 otor type: GP Ordering code, weights 3,4 Technical data, symbol 5 Operating curve 6-9 Direction of shaft rotation, permissible shaft load 1 Shaft version 11 Unit dimensions GP 12 otor type: GR Ordering code, weights 13, 14 Technical data, symbol 15 Operating curve -2 Direction of shaft rotation, permissible shaft load 21 Shaft version 11 Unit dimensions (side port version) 22 Unit dimensions (end port version) 23 otor type: GVD Ordering code, weights 24 Technical data, symbol 25 Operating curve 26- Direction of shaft rotation, permissible shaft load 31 Shaft version 11 Unit dimensions 32 1/32
2 RE 14 7/3.96 Functional Description, applications, mode of operation, variants Gerotor motors are robust hydraulic driveline elements with universal applications. The Gerotor has a special design feature (Gerotor reduction) that allows low output speeds without the need for additional gear stages. In many cases, this can help to reduce costs and cut down weight. Gerotor motors are self-lubricating and practically maintenance-free, merely requiring a regular oil change. Gerotor motors cover a torque spectrum from 1 danm to 1 danm and operate in a power range from to kw. pplications: gricultural and forestry vehicles Conveyor systems Cranes and transport systems unicipal vehicles (road sweepers, snow clearers, road gritters, etc.) Construction machinery ining equipment Winch drives Plastics machinery Wood processing machinery achine tools Shipbuilding ode of operation: Gerotor motors are internally geared motors that convert hydraulic energy into mechanical energy. The Gerotor consists of a ring with an internal gear profile, and an excentric pinion mounted in this internal ring gear. The pinion has one tooth less than the internal ring gear and so only advances by one tooth space every time it rotates within the ring. This effect gives rise to a reduction ratio, which is the basis for the excellent slow-running characteristics of this motor design. cardan shaft with crowned profile on either end transmits the power from the pinion to the output shaft. Series GP, GR and GVD motors are controlled using the control grooves in a drum valve. This drum valve is a part of the shaft in GP and GR motors, whereas the shaft in the GVD model draws the drum valve with it. otor torque is dependent on the size of motor (cm 3 per revolution) and the pressure differential between the inlet and outlet connections Variants: Gerotormotors offers a wide choice of special versions for particular applications in addition to its comprehensive range of standard motors. Wheel motors with recessed mounting flange Two-stage switching motors with variable intake volumes otors with a speedo connection for measuring speeds otors with integrated shock valves 2/32
3 Ordering code and sample order (Type GP, GR, GVD) RE 14 7/3.96 G / * Type Series GP-motor = P 61 GR-motor (side port version) = R 62 GRE-motor (end port version) = RE 621 GVD-motor = VD 6 Displacement (cm 3 per revolution) Type GP GR GVD GRE 5,9 51, 51, 5 C 7,7 1,4 1,4 F 9,9 13,7 13,7 1 G 123,6 125,9 125,9 125 H 15,5 2,9 2,9 K 197, 23,6 23,6 2 L 247,2 251,7 251,7 25 3,9 325, 325, 32 N 47,2 47,2 4 P Size Code letter Further details in clear text Shaft 2-hole flange SE 1 = cylindrical shaft 32 mm 2 = cylindrical shaft 25 mm 3 = tapered shaft 1:1 4 = Involute splined shaft SE 6b 5 = cylindrical shaft 1 inch 4-hole flange SE 6 = cylindrical shaft 32 mm 7 = cylindrical shaft 25 mm = tapered shaft 1:1 9 = Involute splined shaft SE 6b 1 = cylindrical shaft 1 inch Connection thread 1 = etric 2 = Pipe thread Sample order: GP (displacement = 7,7cm 3 per revolution) cylindrical shaft Ø 32mm Connection thread / 14x1,5 Ordering code: GP /61-F11 3/32
4 RE 14 7/3.96 Ordering code and weights (Type GP) GP-otors with 2-hole flange, side port version, series 61 Shaft Connections GP 5 GP GP 1 GP 125 GP GP 2 GP 25 GP 32 Cyl. shaft 14x1,5 61-C11 61-F11 61-G11 61-H11 61-K11 61-L N11 Ø 32mm G1/2 G1/4 61-C21 61-F21 61-G21 61-H21 61-K21 61-L N21 Cyl. shaft 14x1,5 61-C12 61-F12 61-G12 61-H12 61-K12 61-L N12 Ø 25mm G1/2 G1/4 61-C22 61-F22 61-G22 61-H22 61-K22 61-L N22 Tepered 14x1,5 61-C13 61-F13 61-G13 61-H13 61-K13 61-L N13 shaft 1:1 G1/2 G1/4 61-C23 61-F23 61-G23 61-H23 61-K23 61-L N23 Involute 14x1,5 61-C14 61-F14 61-G14 61-H14 61-K14 61-L N14 splinted shaft G1/2 SE 6b G1/4 61-C24 61-F24 61-G24 61-H24 61-K24 61-L N24 Cyl. shaft 14x1,5 61-C15 61-F15 61-G15 61-H15 61-K15 61-L N15 Ø 1inch G1/2 (25,4mm) G1/4 61-C25 61-F25 61-G25 61-H25 61-K25 61-L N25 Weight (kg) 5,4 5,6 5, 5,9 6,2 6,5 6, 7,4 GP-otors with 4-hole flange, side port version, series 61 Shaft Connections GP 5 GP GP 1 GP 125 GP GP 2 GP 25 GP 32 Cyl. shaft 14x1,5 61-C 61-F 61-G 61-H 61-K 61-L N Ø 32mm G1/2 G1/4 61-C26 61-F26 61-G26 61-H26 61-K26 61-L N26 Cyl. shaft 14x1,5 61-C17 61-F17 61-G17 61-H17 61-K17 61-L N17 Ø 25mm G1/2 G1/4 61-C27 61-F27 61-G27 61-H27 61-K27 61-L N27 Tepered 14x1,5 61-C1 61-F1 61-G1 61-H1 61-K1 61-L N1 shaft 1:1 G1/2 G1/4 61-C2 61-F2 61-G2 61-H2 61-K2 61-L N2 Involute- 14x1,5 61-C19 61-F19 61-G19 61-H19 61-K19 61-L N19 splinted shaft G1/2 SE 6b G1/4 61-C29 61-F29 61-G29 61-H29 61-K29 61-L N29 Cyl. shaft 14x1,5 61-C11 61-F11 61-G11 61-H11 61-K11 61-L N11 Ø 1inch G1/2 (25,4mm) G1/4 61-C21 61-F21 61-G21 61-H21 61-K21 61-L N21 Weight (kg) 5,4 5,6 5, 5,9 6,2 6,5 6, 7,4 Sample order: GP (displacement = cm 3 per revolution) 2-hole flange, cyl. shaft Ø 32mm connections G1/2; G1/4 Ordering code: GP / 61-K21 4/32
5 Technical data GP (For applications outside these parameters, please consult us!) RE 14 7/ /3.96 otor size ) 2 2) 25 1) 25 2) 32 1) 32 2) Geometric displacement cm 3 5,9 7,7 9,9 123,6 15,5 197, 197, 247,2 247,2 3,9 3,9 ax. speed min -1 continuous intermittent 3) ax. torque danm continuous , ,5 2 32,5 29,5 2 intermittent 3) 1,5 17,5 21,5 27,5 35,5 42,5 42,5 43, ,5 39 peak 4) ax. power output kw continuous ,2 7 4,5 3, intermittent 3) ,3 6 ax. pressure bar continuous intermittent 3) peak 4) ax. oil flow L/min continuous intermittent 3) ax. input pressure bar continuous intermittent 3) 1 peak 4) 225 ax. return pressure without drain line or max. pressure in drain line 5) (-1 min -1 ) bar continuous ) (1- min -1 ) bar continuous ) (-1 min -1 ) bar continuous ) (-12 min -1 ) bar intermittent 3) 75 ax. return pressure with drain line bar continuous intermittent 3) peak 4) 225 ax. strat pressure with unloaded shaft bar in. start torque danm continuous ,5 27,5 27,5 27 intermittent 3) 9 15, ,5 43 3, in. speed 6) min ) Cilindrical shaft Ø 32mm (E) L GP has built-in non-return valves 5) E () 2) Cilindrical shaft Ø 25mm and Ø 25,4mm (1inch) Tapered shaft and involute splined shaft 3) Intermittent operation: operation max. 1 % per minute 4) Peak load: max. 1 % of every minute 5) Pressure of the shaft seal is identical to the output pressure 6) You must expect that the motor will run lees smoothly at speeds below those specified here 7) Operation of the motors at these pressures at quasistatic load and after consultation of the manufacturer 5/32
6 RE 14 7/3.96 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GP % 7 % 3 kw Type GP kw 4 kw 7 % 6 % 5 % kw 12 kw n (min 1 ) 6/32
7 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) RE 14 7/3.96 This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GP % 65 % 12 kw 9 kw kw Type GP kw kw % 7 % 65 % 3 kw /32
8 RE 14 7/3.96 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GP kw % 7 % kw 4 kw 2 kw Type GP % 7 % 6 % kw 4 kw 2 kw /32
9 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) RE 14 7/3.96 This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GP kw % 7 % 65 % 4 kw 2 kw Type GP % 7 % 65 % 6 % 3 kw /32
10 RE 14 7/3.96 Direction of shaft rotation (looking at shaft end) Permissible shaft load for GP: The allowed radial shaft load depends on the speed n, on the distance between the point of application of force and the mounting flange, and on the shaft design. Direction of rotation (allocation of ports) E = Inlet = Outlet E Permissible shaft load Shaft Ø 32 mm Shaft Ø 25 mm and 25,4 mm (1inch) F rad = x 25 n (dan) 95+L 9 5daN F rad 7 25daN Radial force in dan L F rad = Radial force L = Distance n = Speed Speed in min -1 1/32
11 24 24 Shaft version: Type GP, GR, GVD RE 14 7/3.96 (Dimensions in mm) Ø32 +,1 -,2 Ø1 57,5 1 1x45 5 1x45 Ø25 +,15 -,2 Ø Ø33 Ø ,26 1 -,36 43,2±, 1 1x45 Ø25,4-,2 Ø1 32 4,6±1 Ø33 2 -,36 -,36 43,2±, 1 31,75 2, +,1 -, 1/4" Cylindrical shaft Ø32mm Cylindrical shaft Ø25mm Cylindrical shaft Ø25,4mm Parallel key 1xx45; DIN 65 Parallel key x7x32; DIN 65 Parallel key 1/4x1/4x1 1/4 Inch. S. 46 6,25±,5 Ø26, 2x1,5 4,5 43,2±, 37 26,4±1,5x45 1: ,5 25±,4 3,5 Ø33 21,52±,5 1 25,324±,5 Ø33 15,4-,3 6x6 5 Involute splined shaft Tapered shaft. S. 259 (ISO / R 775) SE 6b Parallel key 5x5x14; DIN 65 11/32
12 RE 14 7/3.96 7/11.96 Unit Dimensions: Type GP (Dimensions in mm) (Shaft versions see page 11) Type L (- 1,5) Ø2,5±,5 GP GP 13 GP GP ,5 L1 ±,3 GP 149 GP 2 154,5 GP 25 1 L 2±,3 2±,3 36±,3 3±,15 G 1/2 2±,3 2±,3 4 x ; 13 GP Shaft L 1 Ø 32 mm max. 6,3 Ø 25 mm 54±,6 Ø 25,4 mm 54±,6 SE 6b max. 55,3 Tapered shaft 6 1 G 1/2 G 1/4 1±,1 1±,1 Ø9 X detail X Ø 1 Ø,4 1 Ø, ,5 13,5 12/32
13 Item numbers and weights (Type GR-side port version) RE 14 7/3.96 GR-otors with 2-hole flange, side port version, series 62 Shaft Connections GR 5 GR GR 1 GR 125 GR GR 2 GR 25 GR 32 GR 4 Cyl. shaft Ø 32mm 14x1,5 G1/2 62-C11 62-F11 62-G11 62-H11 62-K11 62-L N11 62-P11 G1/4 62-C21 62-F21 62-G21 62-H21 62-K21 62-L N21 62-P21 Cyl. shaft Ø 25mm 14x1,5 G1/2 62-C12 62-F12 62-G12 62-H12 62-K12 62-L N12 62-P12 G1/4 62-C22 62-F22 62-G22 62-H22 62-K22 62-L N22 62-P22 Tapered shaft 1:1 14x1,5 G1/2 62-C13 62-F13 62-G13 62-H13 62-K13 62-L N13 62-P13 G1/4 62-C23 62-F23 62-G23 62-H23 62-K23 62-L N23 62-P23 Involute splined shaft 14x1,5 G1/2 62-C14 62-F14 62-G14 62-H14 62-K14 62-L N14 62-P14 SE 6b G1/4 62-C24 62-F24 62-G24 62-H24 62-K24 62-L N24 62-P24 Cyl. shaft Ø 1inch 14x1,5 G1/2 62-C15 62-F15 62-G15 62-H15 62-K15 62-L N15 62-P15 (25,4mm) G1/4 62-C25 62-F25 62-G25 62-H25 62-K25 62-L N25 62-P25 Weight (kg) 5,6 5, 6, 6,1 6,4 6,7 7, 7,6,2 GR-otors with 4 -hole flange, side port version, series 62 Shaft Connections GR 5 GR GR 1 GR 125 GR GR 2 GR 25 GR 32 GR 4 Cyl. shaft 14x1,5 62-C 62-F 62-G 62-H 62-K 62-L N 62-P Ø 32mm G1/2 G1/4 62-C26 62-F26 62-G26 62-H26 62-K26 62-L N26 62-P26 Cyl. shaft Ø 25mm 14x1,5 G1/2 62-C17 62-F17 62-G17 62-H17 62-K17 62-L N17 62-P17 G1/4 62-C27 62-F27 62-G27 62-H27 62-K27 62-L N27 62-P27 Tapered shaft1:1 14x1,5 G1/2 62-C1 62-F1 62-G1 62-H1 62-K1 62-L N1 62-P1 G1/4 62-C2 62-F2 62-G2 62-H2 62-K2 62-L N2 62-P2 Involute splined shaft 14x1,5 G1/2 62-C19 62-F19 62-G19 62-H19 62-K19 62-L N19 62-P19 SE 6b G1/4 62-C29 62-F29 62-G29 62-H29 62-K29 62-L N29 62-P29 Cyl. shaft Ø 1inch 14x1,5 G1/2 62-C11 62-F11 62-G11 62-H11 62-K11 62-L N11 62-P11 (25,4mm) G1/4 62-C21 62-F21 62-G21 62-H21 62-K21 62-L N21 62-P21 Weight (kg) 5,6 5, 6, 6,1 6,4 6,7 7, 7,6,2 Sample order: GR (displacement = cm 3 per revolution) 4-hole, tapered shaft connections G1/2; G1/4 Ordering code: GR / 62-F2 13/32
14 RE 14 7/3.96 Item numbers and weights (Type GR-end port version) GR-otors with 4-hole flange, end port version, series 621 Shaft Connections GR 5 GR GR 1 GR 125 GR GR 2 GR 25 GR 32 GR 4 Cyl. Shaft 14x1,5 621-C 621-F 621-G 621-H 621-K 621-L N 621-P Ø 32mm G1/2 G1/4 621-C F G H K L N P26 Cyl. Shaft 14x1,5 621-C F G H K L N P17 Ø 25mm G1/2 G1/4 621-C F G H K L N P27 Tapered 14x1,5 621-C1 621-F1 621-G1 621-H1 621-K1 621-L N1 621-P1 shaft1:1 G1/2 G1/4 621-C2 621-F2 621-G2 621-H2 621-K2 621-L N2 621-P2 Involute 14x1,5 621-C F G H K L N P19 splined shaft G1/2 SE 6b G1/4 621-C F G H K L N P29 Cyl. Shaft 14x1,5 621-C F G H K L N P11 Ø 1inch G1/2 (25,4mm) G1/4 621-C F G H K L N P21 Weight (kg) 6,9 7,1 7,2 7,4 7,7,2,7 9,3 9,7 Sample order: GR 25 (displacement = 25cm 3 per revolution) 2-hole flange, cylindrical shaft Ø 25mm connections G1/2; G1/4; end port version Ordering number: GR 25 / /32
15 Technical Data GR (For applications outside these parameters, please consult us!) RE 14 7/3.96 7/11.96 otor size ) 2) 2 1) 2 2) 25 1) 25 2) 32 1) 32 2) 4 1) 4 2) Geometric displacement min -1 51, 1,4 13,7 125,9 2,9 2,9 23,6 23,6 251,7 251,7 325, 325, 47,2 47,2 ax. speed min -1 continuous intermittent 3) ax. torque danm continuous ,5 intermittent 3) peak 4) ax. power output kw continuous , ,5 4,5 4, 4 intermittent 3),5 12, ,5 12, ,5,5 6 6,6 5, ax. pressure bar continuous intermittent 3) peak 4) ax. oil flow L/min continuous intermittent 3) ax. input pressure bar continuous intermittent 3) peak 4) 225 ax. return pressure without drain line or max. pressure in drain line 5) (-1 min -1 ) bar continuous ) (1- min -1 ) bar continuous ) (-775 min -1 ) bar continuous ) (-97 min -1 ) bar intermittent 3) 75 ax. return pressure with drain line bar continuous intermittent 3) peak 4) 225 ax. start pressure with unloaded shaft bar in. start torque danm continuous 7,5 11,5 14,5 19, at max. pressure drop intermittent 3) 9,5 14,5 19,5 24, in. speed 6) min ) Cilindrical shaft Ø 32mm (E) L GR has built-in non-return valves 5) E () 2) Cilindrical shaft Ø 25mm and Ø 25,4mm (1inch) Tapered shaft and involute splined shaft 3) Intermittent operation: operation max. 1 % per minute 4) Peak load: max. 1 % of every minute 5) Pressure of the shaft seal is identical to the output pressure 6) You must expect that the motor will run lees smoothly at speeds below those specified here 7) Operation of the motors at these pressures at quasistatic load and after consultation of the manufacturer. 15/32
16 RE 14 7/3.96 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GR kw kw % 65 % Type GR % % 6 % 7 % 9 kw 3 kw 12 kw /32
17 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) RE 14 7/3.96 This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GR kw 9 kw % % 7 % 65 % 3 kw Type GR % % 7 % 65 % 12 kw 9 kw 3 kw /32
18 RE 14 7/3.96 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GR kw 12 kw % % 7 % 65 % 2 kw 4 kw Type GR kw kw % 7 % 65 % 4 kw 2 kw /32
19 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) RE 14 7/3.96 This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GR % % kw 7 % 4 kw 65 % 2 kw Type GR n (min 1) ) Q (L/min) kw % 3 % 7 % 65 % 3 kw /32
20 RE 14 7/3.96 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GR % % 7 % 65 % 3 kw /32
21 Direction of shaft rotation (looking at shaft end) RE 14 7/3.96 Permissible shaft load for GR: The allowed radial shaft load depends on the speed n, on the distance between the point of application of force and the mounting flange, and on the shaft design. Direction of rotation, side port version (allocation of ports) E = Inlet = Outlet Direction of rotation, side port version (allocation of ports) E = Inlet = Outlet E E E Permissible shaft load Shaft Ø 32 mm Shaft Ø 25 mm and 25,4 mm (1inch) F rad = x 25 n (dan) 95+L 9 5daN F rad 7 25daN Radial force in dan L F rad = Radial force L = Distance n = Speed Speed in min -1 21/32
22 RE 14 7/ /3.96 Unit Dimensions: Type GR-Side port version (Shaft versions see page 11) (Dimensions in mm) Type L (- 1,5) GR GR 143 Ø2,5±,5 GR GR GR 154 GR 2 159,5 L1 ±,3 GR 25 6 GR GR 4 17 L 2±,3 2±,3 36±,3 3±,15 G 1/2 2±,3 2±,3 4 x ; 13 G 1/2 Shaft L 1 Ø 32 mm max. 6,3 Ø 25 mm 54±,6 Ø 25,4 mm 54±,6 SE 6b max. 55,3 Tapered Shaft 6 1 G 1/4 1±,1 1±,1 Ø1 Ø,4 1 Ø,4 45 Ø1 X detail X 13,5 13,5 22/32
23 Unit Dimensions: Type GR-End port version RE 14 7/ /3.96 (Dimensions in mm) (Shaft versions see page 11) G1/2 9,1 G1/4 4,7 Ø42 Ø2,5±,5 L1 ±,3 Type L (- 1,5) L Ø1 Ø1 Ø,4 GR GR 153 GR GR GR 4 GR 2 9,5 GR GR GR Shaft L 1 45 Ø 32 mm max. 6,3 Ø 25 mm 54±,6 55 Ø 25,4 mm 54±,6 SE 6b max. 55,3 13, Tapered shaft /32
24 RE 14 7/3.96 Ordering code and weights (Type GVD) GVD-otors with 2-hole flange, side port version, series 6 Shaft Connections GVD 5 GVD GVD 1 GVD 125 GVD GVD 2 GVD 25 GVD 32 GVD 4 Cyl. Shaft 14x1,5 6-C11 6-F11 6-G11 6-H11 6-K11 6-L N11 6-P11 Ø 32mm G1/2 G1/4 6-C21 6-F21 6-G21 6-H21 6-K21 6-L N21 6-P21 Cyl. Shaft 14x1,5 6-C12 6-F12 6-G12 6-H12 6-K12 6-L N12 6-P12 Ø 25mm G1/2 G1/4 6-C22 6-F22 6-G22 6-H22 6-K22 6-L N22 6-P22 Tapered 14x1,5 6-C13 6-F13 6-G13 6-H13 6-K13 6-L N13 6-P13 Shaft 1:1 G1/2 G1/4 6-C23 6-F23 6-G23 6-H23 6-K23 6-L N23 6-P23 Involute 14x1,5 6-C14 6-F14 6-G14 6-H14 6-K14 6-L N14 6-P14 splined shaft G1/2 SE 6b G1/4 6-C24 6-F24 6-G24 6-H24 6-K24 6-L N24 6-P24 Cyl. Shaft 14x1,5 6-C15 6-F15 6-G15 6-H15 6-K15 6-L N15 6-P15 Ø 1inch G1/2 (25,4mm) G1/4 6-C25 6-F25 6-G25 6-H25 6-K25 6-L N25 6-P25 Weight (kg),5,7,9 9,1 9,4 9,6 9,9 1,5 11,1 GVD-otors with 4-hole flange, side port version, series 6 Shaft Connections GVD 5 GVD GVD 1 GVD 125 GVD GVD 2 GVD 25 GVD 32 GVD 4 Cyl. Shaft 14x1,5 6-C 6-F 6-G 6-H 6-K 6-L 6-6-N 6-P Ø 32mm G1/2 G1/4 6-C26 6-F26 6-G26 6-H26 6-K26 6-L N26 6-P26 Cyl. Shaft 14x1,5 6-C17 6-F17 6-G17 6-H17 6-K17 6-L N17 6-P17 Ø 25mm G1/2 G1/4 6-C27 6-F27 6-G27 6-H27 6-K27 6-L N27 6-P27 Tapered 14x1,5 6-C1 6-F1 6-G1 6-H1 6-K1 6-L N1 6-P1 Shaft 1:1 G1/2 G1/4 6-C2 6-F2 6-G2 6-H2 6-K2 6-L N2 6-P2 Involute- 14x1,5 6-C19 6-F19 6-G19 6-H19 6-K19 6-L N19 6-P19 splined shaft G1/2 SE 6b G1/4 6-C29 6-F29 6-G29 6-H29 6-K29 6-L N29 6-P29 Cyl. Shaft 14x1,5 6-C11 6-F11 6-G11 6-H11 6-K11 6-L N11 6-P11 Ø 1inch G1/2 (25,4mm) G1/4 6-C21 6-F21 6-G21 6-H21 6-K21 6-L N21 6-P21 Weight (kg),5,7,9 9,1 9,4 9,6 9,9 1,5 11,1 Sample order: GVD 1 (displacement = 1cm 3 per revolution) 4-hole flange, cyl. shaft Ø 32mm connections G1/2; G1/4 Ordering code: GVD 1 / 6-G26 24/32
25 Technical data GVD (For applications outside these parameters, please consult us!) RE 14 7/3.96 7/11.96 otor size ) 2) 2 1) 2 2) 25 1) 25 2) 32 1) 32 2) 4 1) 4 2) Geometric displacement min -1 51, 1,4 13,6 125,9 2,9 2,9 23,6 23,6 251,7 251,7 325,75 325, 47,2 47,2 ax. speed min -1 continuous intermittent 3) ax. torque danm continuous , ,5 intermittent 3) ,5 4 peak 4) ax. power output kw continuous , ,5 4, 4 intermittent 3),5 12, ,5 12, ,5,5 7,5 7,5 7,5 ax. pressure bar continuous intermittent 3) peak 4) ax. oil flow L/min continuous intermittent 3) ax. input pressure bar continuous intermittent 3) 1 peak 4) 225 ax. return pressure without drain line or max. pressure in drain line 5) (-1 min -1 ) bar continuous ) (1- min -1 ) bar continuous ) (-1 min -1 ) bar continuous ) (-97 min -1 ) bar intermittent 3) 75 ax. return pressure with drain line bar continuous intermittent 3) peak 4) 225 ax. start pressure with unloaded shaft bar in. start torque danm continuous 7,5 11,5 14,5 19,5 25,5 22,5 25,5 23,5 2 21, intermittent 3) 9,5 14,5 19,5 24,5 31,5 31,5 4,5 32,5 3,5, ,5 in. speed 6) min ) Cilindrical shaft Ø 32mm (E) L GVD has built-in non-return valves 5) E () 2) Cilindrical shaft Ø 25mm and Ø 25,4mm (1inch) Tapered shaft and involute splined shaft 3) Intermittent operation: operation max. 1 % per minute 4) Peak load: max. 1 % of every minute 5) Pressure of the shaft seal is identical to the output pressure 6) You must expect that the motor will run lees smoothly at speeds below those specified here 7) Operation of the motors at these pressures at quasistatic load and after consultation of the manufacturer. 25/32
26 RE 14 7/3.96 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GVD % 2 kw kw 4 kw % 65 % Type GVD qv (L/min) % 6 % % 4 kw 12 kw kw 7 % 2 kw /32
27 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) RE 14 7/3.96 This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GVD kw kw % % 7 % 6 % 4 kw 2 kw Type GVD % % 4 kw 2 kw 12 kw kw 7 % 6 % /32
28 RE 14 7/3.96 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GVD Q (L/min) % 12 kw kw % % 65 % 2 kw 4 kw Type GVD % 12 kw kw 7 % 65 % 4 kw 2 kw /32
29 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) RE 14 7/3.96 This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GVD kw % 2 kw 4 kw 7 % 6 % % Type GVD qv (L/min) kw % 65 % 4 kw % 2 kw /32
30 RE 14 7/3.96 Operating Curves (measured at ν = 35mm 2 /s and t = 5 C) This performance data apply with a backflow pressure of 5-1 bar, using a mineral oil-based hydraulic oil with a viscosity of 35 mm 2 /s at 5 C. : Endurance operation : Intermittent operation (operation max. 1 % per minute) Note: Intermittent pressure drop must not coincide with fluctuations in the oil flow. Type GVD kw kw % % 7 % 65 % 2 kw /32
31 Direction of shaft rotation (looking at shaft end) RE 14 7/3.96 Direction of shaft rotation (allocation of ports) E = Inlet = Outlet E E Permissible shaft load Permissible shaft load for GVD: The tapered roller bearings on the output shaft mean it can accept high levels of axial and radial shaft load. Radial load starting characteristics are considerably better than motors with plain bearings. The broken curve plots the maximum permissible radial load. Loads above and beyond this level can lead to breakage. The central solid curves plot the permissible radial loads for a theoretical service life (1) of hours at 2 min-1. The expected service life can be calculated for different speeds and / or radial loads. Please refer to the "Gerotormotors Generelles" brochure for more detailed information about the calculation methods. These data assume the use of a hydraulic fluid with a sufficient anti-wear additive content. Shaft load F rad = f (L h ) Shaft load F rad = f (L) bei L h = h reaking limit Radial force in dan n=1min -1 n=2min -1 n=4min -1 n=min -1 F ax F rad 27,5 L Radial force in dan n = 1min -1 n = 2min -1 n = 4min -1 n = min ,5 mm 6 mm Calculated durability in 1 3 h F rad = Radial force F ax = xial force,4f rad L h = Calculated durability L = Distance 31/32
32 RE 14 7/3.96 7/11.96 Unit Dimensions: Type GVD (Shaft versions see page 11) (Dimensions in mm) Ø2,5±,5 Type L (- 1,5) GVD 5 179,3 L1-2,5 1-,5 GVD 13,3 GVD 1 16,3 GVD ,3 GVD 194,3 GVD 2 199, GVD 25 26,3 L 22 96, 1; 11 5±,2 27 GVD 32 2,3 GVD 4 227,3 G 1/2; 15 Shaft L 1 Ø 32 mm max. 6,3 Ø 25 mm 54±, X detail Ø 25,4 mm 54±,6 SE 6b max. 55,3 Tapered Shaft ,5 13, ,3-,3 55,3-,3 9 G 1/4 X Ø,4 1±1,5 Ø,4 132±1,5 HNP obile Hydraulik GmbH & Co. KG Ludwigsluster Chaussee 5 D-1937 Parchim Telefon 3 71 / 6 6 Telefax 3 71 / oder annesmann Rexroth Limited Cromwell Road, St. Neots, Huntingdon, Cambs. PE19 2ES Tel: (14) Fax: (14) /32 The specified data is for product description only and may not be deemed to be guaranteed unless expressly confirmed in the contract. ll rights reserved Subject to revision
RE / Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW. Hydraulik Nord. Contents 1/26
RE14 6/3.96 Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW RE 14 6/3.96 Standard motor type GMS Standard motor type GMT Short motor type GMTS Contents Name page Characteristics,
More informationHydraulic Motor (Radial piston multi-stroke)
RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction
More informationOMP Hydraulic Motor Versions
Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationRE / /09.97
RE 5 05/0.98 05/09.97 Hydraulic Motor (Radial Piston, Multi-Stroke) Type MCR 0, Series X RE 5 05/0.98 Size0 to 400 up to 4 bar up to 400 cm up to 07 Nm Replaces: 09.97 Compact, sturdy construction Smooth
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted
More informationHYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS
HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationRE / Check-Q-meter type FD, series 2X. Ordering details FD 2X / V * Symbols 1/8. Replaces: 03.92
RE 1/09.9 1/03.9 Check-Q-meter type FD, series Sizes 1, 1,, 3 Up to 0 L/min Up to 30 bar RE 1/09.9 Replaces: 03.9 Features: For installation in manifolds (cartridge valve), With SE flanged ports, For sub-plate
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationAxial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
More informationHYDRAULIC MOTORS EPMT
HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Yes Yes Yes Yes Yes Yes Standard Yes Yes Yes Yes Yes Yes P.t.o. Yes Yes
More informationRE / Central Hydraulics Valve LT43 for Tractors with Priority Function for Steering and Trailer Brake and Pilot Oil Valve.
Central Hydraulics Valve LT43 for Tractors with Priority Function for Steering and Trailer Brake and Pilot Oil Valve RE 66 235/07.95 Characteristics Input element with priority and pilot oil valve for
More informationRexroth Hydraulics. Fixed displacement vane pumps Types PVV and PVQ RE /11.97
RE 1 335/1.97 RE 1 335/11.97 Fixed displacement vane pumps Types and Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 H/A/D 5769/97 Single pump type
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationFixed Displacement Motor A2FM
rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationFixed Displacement Plug-In Motor A2FE
Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Plug-In Motor 2FE RE 9008/03.97 replaces 04.96
More informationAxial piston fixed motor A2FM for explosive areas II 2G ck IIB Tx
xial piston fixed motor 2FM for explosive areas II 2G ck II Tx Part II of instruction manual according to TEX directive 2014/34/EU data sheet RE 91001-01-X-2 Edition: 04.2016 Replaces: 01.2016 Series 61
More informationOML and OMM Orbital motors. Technical Information
OML and OMM Orbital motors Technical Information OML and OMM A wide range of orbital motors F300030.TIF A WIDE RANGE OF ORBITAL MOTORS Sauer-Danfoss is a world leader within production of low speed orbital
More informationOMEW Hydraulic Motor Versions
Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More informationOrbital Motors Type OMP, OMR and OMH. Technical Information
Orbital Motors Type OMP, OMR and OMH Technical Information OMP, OMR and OMH A Wide Range of Hydraulics Motors F 301 245 A Wide Range of Hydraulic Motors Sauer-Danfoss is a world leader within production
More informationAxial piston variable motor A6VM series 71
xial piston variable motor 6VM series 71 RE 91610 Edition: 06.2014 Replaces: 04.2013 Sizes 60 to 215 Nominal pressure 450 bar Maximum pressure 500 bar Open and closed circuits Features Variable motor with
More informationIPV catalog High-pressure internal gear pumps
Voith Turbo IPV catalog High-pressure internal gear pumps Benefits that convince Internal gear pumps from Voith Turbo are working reliably in hundreds of thousands of machines worldwide. Sophisticated
More informationAxial Piston Fixed Pump A17FNO Series 10
Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with
More informationTMVW Orbital Motors. Technical Information
Orbital Motors Technical Information A Wide Range of Orbital Motors A Wide Range of Orbital Motors F300030 Tif Sauer-Danfoss is a world leader within production of low speed orbital motors with high torque.
More informationHYDRAULIC MOTORS EPMS - series 3
HYDRAULIC EPMS - series APPLICATION» Conveyors» Metal working machine» Machines for agriculture» Road building machines» Mining machinery» Food industries» Special vehicles etc. CONTENTS Specification
More informationUŽSISAKYK internetu - el. paštu - telefonu
HYDRAULIC UŽSISAKYK internetu - www.dominga.lt/eshop el. paštu - info@dominga.lt telefonu - +70 52 2221 APPLICATION»»»»» Conveyors Textile machines» Mining machinery Machine tools Ventilators Construction
More informationFixed Displacement Pump A2FO
RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95
More informationOMR Technical Information Versions
Versions Versions Mounting flange Spigot diam,eter (front /rear end) Bolt circle diameter (BC) Shaft Port size European version US version Side port version End port version Flange port version Standard
More informationHYDRAULIC MOTORS EPMS
HYDRAULIC EPMS APPLICATION» Conveyors;» Metal working machines;» Machines for agriculture;» Road building machines;» Mining machinery;» Food industries;» Special vehicles etc. CONTENTS Specification data...
More informationHydraulic Motor (Radial Piston, Multi-Stroke)
Industrial Hydraulics Electric Drives and Controls inear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics Hydraulic Motor (Radial Piston, Multi-Stroke) RE 15 08/10.94 1/8
More informationHYDRAULIC MOTORS GENERAL INFORMATION
GENERAL INFORMATION MGL... Document: HM-1-Dec 2012 Applications: -Agricultural harvesters and seeders -Conveyors -Machine tools -Food industries -Turn equipment -Brush drivers -Sweepers and floor polishers
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MP APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationDISC VALVE HYDRAULIC MOTORS
LHS LH LHV DISC VALVE HYDRAULIC CONENS Page Hydraulic otors Series LHS... 4 Hydraulic otors Series LH... 2 Hydraulic otors Series LHV... 9 Hydraulic otors Series LHHW... 1 otor Special Features... 7 otors
More informationFixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement
More informationHYDRAULIC MOTOR-BRAKE B/MR
HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22
More informationSPOOL VALVE HYDRAULIC MOTORS
SPOOL VALVE HYDRAULIC The operating principle of the motors is based on an internal gear design, consisting of a stator and rotor through which the output torque and speed are transmitted. The distributor
More informationFixed Displacement Motor AA2FM (A2FM)
Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400
More informationIPV Catalog High-pressure Internal Gear Pumps
IPV Catalog High-pressure Internal Gear Pumps Benefits that convince Features that count Machines that run Internal gear pumps from Voith Turbo H + L Hydraulic are working reliably in hun dreds of thousands
More informationRadial piston motor for wheel drives MCR-F
Radial piston motor for wheel drives MCR-F RE 15198 Edition: 02.2017 Replaces 07.2015 Frame size MCR3, MCR5, MCR10, MCR15 (for frame size 20 see MCR20-C) Displacement 160 cc to 2150 cc Differential pressure
More informationFixed Displacement Motor A10FM A10FE
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service Fixed Displacement Motor 10FM 10FE RE 91 172/06.06 1/24 Replaces: 01.03 Technical Data Sheet Size 10...63
More informationExternal gear pumps Type G2, Series 4X
E 1 /.99 External gear pumps Type G2, Series X E 1 /.99 NS to 22 up to 2 bar up to 22. cm eplaces:.98 New principle of housing sealing, thereby giving a very long housing service life ong seal service
More informationPriority valve Type LPS
RE 27 548/10.98 riority valve Type LS Nominal sizes 40 to 160 Series 1X Nominal pressure 250 bar Maximum flow 160 L/min. H/AD/5977/98 riority valve type LS... Contents Description age Features 1 Ordering
More informationAxial Piston Fixed Motor A2FNM for Fan Drives and Flywheel Mass
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FNM for Fan Drives and Flywheel Mass RE 91007/02.11 1/16 Data sheet Series 61
More informationHEAVY DUTY HYDRAULIC MOTORS
HEAVY DUTY HYDRAULIC MTRS CNTENTS Page Hydraulic Motors Series MSWM... 4 Hydraulic Motors Series MTK... 8 Hydraulic Motors Series MTM... 17 Hydraulic Motors Series TMF... 9 Hydraulic Motors Series MVM...
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationPlanetenmotor Serie MP
Planetenmotor Serie MP Bestellnr. Typ Code - Planetenmotor 25ccm-W:Ø25-HD MP25CD -5 Planetenmotor 2ccm-W:Ø25-HD MP2CD -1 Planetenmotor 9,7ccm-W:Ø25-HD MP4CD -115 Planetenmotor 49,5ccm-W:Ø25-HD MP5CD -1
More informationSPECIAL HYDRAULIC MOTORS AND MOTOR-BRAKES
SPECIAL HYDRAULIC AND MTRBRAKES CNTENTS Page Hydraulic Motors Series HP... Hydraulic Motors Series HR...11 Hydraulic Motors Series MLHRW...1 Hydraulic Motors Series...2 Hydraulic Motorbrakes Series BHR...3
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2014 Converted
More informationIPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
More informationRE 91808/ AA4VSE Plug-in dual displacement motor. High pressure range. Series 10 Axial piston swashplate design, SAE model
AA4VSE Plug-in dual displacement motor Series Axial piston swashplate design, SAE model RE 91808/09.90 RE 91808/09.90 Brueninghaus Hydromatik Size 250 Nominal pressure 350 bar Peak pressure 400 bar High
More informationRadial piston motors for industrial applications MCR-D
Radial piston motors for industrial applications MCR-D MCR-E RE 15196 Edition: 02.2017 Replaces: 12.2013 MCR-D Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450
More informationAxial piston variable pump A10VSO Series 31 for explosive areas ATEX II 3G ck IIB T4
Axial piston variable pump A10VSO Series 31 for explosive areas ATE II 3G ck II T4 Part II of instruction manual according to ATE directive 94/9/EC data sheet RE 92711-01--2 Issue: 04.2015 Replaces:. Sizes
More informationMOMV SERIES HYDRAULIC MOTOR
MOMV SERIES HYDRAULIC MOTOR MOMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationAxial piston variable pump A7VO
Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program
More informationOMEW Standard and with Low Speed Option. Orbital Motors. Technical Information
Standard and with Low Speed Option Orbital Motors Technical Information Contents Revision History Table of Revisions Date Page Changed Rev Jan 2009 Many major change BA Mar 2010 16 Japan location BB Contents
More informationAxial piston variable motor A6VM Series 63. Europe. RE-E Edition: Replaces:
xial piston variable motor 6V Series 63 Europe RE-E 91604 Edition: 05.2016 Replaces: 06.2012 ll-purpose high pressure motor Sizes 28: Nominal pressure 400 bar aximum pressure 450 bar Sizes 250 to 1000:
More informationVariable Plug-in Motor A6VE
Variable Plug-in Motor 6VE RE 91616/01.12 1/52 Data sheet Series 71 Sizes 60 to 170 Nominal pressure 450 bar Maximum pressure 500 bar Open and closed circuits Contents Ordering code for standard program
More information镇江液压件厂有限责任公司 BMV SERIES HYDRAULIC MOTOR BMV 315 BMV 400 BMV 500 BMV 630 BMV 800 BMV
BMV SERIES HYDRAULIC MOTOR BMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationAxial Piston Fixed Displacement Pump KFA
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Axial Piston Fixed Displacement Pump KFA RE 91 501/06.03 1/12
More informationAxial piston fixed motor A2FM Series 70 A2FE Series 70
Axial piston fixed motor A2FM Series 70 A2FE Series 70 RE 91071 RE Edition: 910712.2015 Edition: Replaces 12.2015 03.2015 A2FMN, A2FEN (sizes 56 to 107): Nominal pressure 300 bar Maximum pressure 350 bar
More informationFixed Plug-In Motor A2FE
Fixed Plug-In Motor 2FE RE 91008/06.2012 1/24 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 28 to 180 400/450 bar 250 to 355 350/400 bar Open and closed circuits Contents Ordering
More informationAxial Piston Variable Motor A6VM
Electric Drives and Controls Hydraulics Linear otion and ssembly Technologies Pneumatics Service xial Piston Variable otor 6V RE 91604/01.07 1/76 Replaces: 05.06 Technical data sheet Series 6 Sizes Nominal
More informationAxial piston variable pump A10VSO series 32
xial piston variable pump 10VO series 32 RE 92714 Issue: 10.2014 Replaces: 06.2011 izes 45 to 180 Nominal pressure 280 bar Maximum pressure 350 bar For industrial application areas Open circuit Characteristics
More informationProportional pressure reducing valve Type FTDRE 4 K
RE 58 38/4.99 Proportional pressure reducing valve Type FTDRE 4 K Nominal size 4 Series 1X Maximum control pressure 18 / 3 bar Maximum operating pressure 2 bar Flow 5 L/min at p = 7 bar F9513 Type FTDRE
More informationAxial piston variable motor A6VM series 71. Americas. RE-A Edition: Replaces:
xial piston variable motor 6VM series 71 mericas RE- 91610 Edition: 12.2015 Replaces: 04.2013 Sizes 60 to 215 Nominal pressure 6500 psi (450 bar) Maximum pressure 7250 psi (500 bar) Open and closed circuits
More informationAxial piston variable pump A10V(S)O Series 31
Axial piston variable pump A10V()O eries 31 RE 92701 Edition: 06.2016 Replaces: 01.2012 ize 18 (A10VO) izes 28 to 1 (A10VO) Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features Variable
More informationProportional pressure relief valve Types DBE(M) and DBE(M)E
RE 29 142/02.99 Replaces: 06.97 Proportional pressure relief valve Types DE(M) and DE(M)E Nominal size 32 1) Series 3X Maximum operating pressure 3 bar Maximum flow 600 L/min H/ 1764 1) NS 10; 25, Series
More informationRexroth Hydraulics. Pressure reducing valve, pilot operated, type 3DR 3DR 10 P 6X Y 00 RE /10.97
RE 26 915/10.97 Replaces: 01.97 Pressure reducing valve, pilot operated, type 3DR Nominal size 10 Series 6X Maximum operating pressure 315 bar Maximum flow 120 L/min Contents H/A/D 5845/97 ype 3DR 10 P5-6X/315Y/00M
More informationInternal gear pump Type PGH Fixed displacement
RE 10 223/07.99 Replaces: 01.98 Internal gear pump Type GH Fixed displacement Frame sizes 2, 3, 4 and 5 eries 2X Maximum operating pressure 350 bar Maximum displacement 6 to 250 cm 3 DR 67180-3/94 Internal
More informationHigh Pressure Gear Pumps KP 5
High Pressure Gear Pumps KP 5 Construction 1 6 2 9 8 4 5 7 3 1 Housing 2 Gearing 3 Drive shaft end 4 Flange cover 5 Roller bearing 6 Sliding plates 7 Lip-type shaft seal 8 Plain bearing 9 Housing gasket
More informationAxial piston fixed motor A2FM series 70. Americas. RE-A Edition:
Axial piston fixed motor A2FM series 70 Americas RE-A 91071 Edition: 05.2015 A2FMN (Sizes 90 and 107): Nominal pressure 300 bar Maximum pressure 350 bar A2FMM (Sizes 80 and 90): Nominal pressure 400 bar
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm
More informationContents. Contents. Hydraulic motor Series NMP. Page 2. Hydraulic motor Series NMR. Page 14. Hydraulic motor Series NMS(E) Page 24
Contents Hydraulic motor Series NMP Hydraulic motor Series NMR Hydraulic motor Series NMS(E) Hydraulic motor Series NMT Hydraulic motor Series NMV Page 2 Page 14 Page 24 Page 36 Page 43 Contents 3 Hydraulic
More informationRadial piston motor for frame integrated drives MCR-A
Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationIPCA Medium-pressure Internal Gear Pumps Technical Data Sheet
IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet Design and Function 1 7 6 5 9 2 6 5 7 8 2 1 4a 4b 3 1 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationGear Pump Model G4, Series 2X
s 40 to 100 Gear ump Model G4, Series 2X 3000 SI (210 bar) 6.1 in 3 (100 cm 3 ) 10 042/03.95 10 042/03.95 eplaces: 01.91 SE connection flanges Sleeve bearings for long life Single block bearings ISO or
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationRadial Piston Motor (Multi-Stroke) MCR3
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service Radial Piston Motor (Multi-Stroke) MCR3 RE 15205/06.09 1/18 Replaces: 02.98 Data sheet Series 3X Size 160
More informationAxial piston variable pump A10V(S)O Series 31. Americas. RE-A Edition: Replaces:
Axial piston variable pump A10V()O eries 31 Americas RE-A 92701 Edition: 02.2017 Replaces: 03.2012 ize 18 (A10VO) izes 28 to 140 (A10VO) Nominal pressure 4100 psi (280 bar) Maximum pressure 5100 psi (350
More informationAxial piston variable pump A10VO Series 32
Axial piston variable pump A10VO eries 32 RE 92705 Edition: 06.2016 Replaces: 01.2012 Optimized medium pressure pump for powerful machines izes 45 to 180 Nominal pressure 280 bar Maximum pressure 350 bar
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125
More informationAxial piston variable motor A6VM series 65. Americas. RE-A Edition: Replaces:
xial piston variable motor 6VM series 65 mericas RE- 91607 Edition: 11.2015 Replaces: 01.2015 Sizes 55 to 200 Nominal pressure 5800 psi (400 bar) Maximum pressure 6500 psi (450 bar) Open and closed circuits
More informationMAKING MODERN LIVING POSSIBLE. Technical Information. Orbital Motors TMVW. powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Orbital Motors TMVW powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev September 2015 New curve for permissible shaft load 0201 November 2014
More informationFixed Plug-In Motor A2FE
Fixed Plug-In Motor 2FE RE 91 008/09.07 1/16 Replaces: 04.05 echnical data sheet Series 6 Sizes Nominal pressure/peak pressure 28 to 180 400/450 bar 250 and 355 350/400 bar Open and closed circuits Contents
More informationIPC Medium-Pressure Internal Gear Pumps Technical Data Sheet
IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet Function 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial disc Axial
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More informationProportional pressure relief valve Type DBETRE
RE 9 68/.99 Proportional pressure relief valve Type DBETRE Nominal size 6 Series X Max. operating pressure 5 bar Max. flow up to L/min H/A/D 67/99 Type DBETRE-X/ G4KA with integrated control electronics
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationGerotor pump, fixed displacement volume
Gerotor pump, fixed displacement volume RE 10545/12.11 1/12 Type GZ Component series 1X Maximum operating pressure 15 bar Maximum displacement 140 cm³ H7572_d Table of contents Contents age eatures 1 Ordering
More informationRadial piston motor for heavy duty wheel drives MCR-W
Radial piston motor for heavy duty wheel drives MCR-W RE 15200 Edition: 09.2015 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationAxial Piston Variable Pump A18VLO Series 11
Axial Piston Variable Pump A18VLO eries 11 RE 92280 Issue: 06.2012 Replaces: 06.2009 ize 80 Nominal pressure 350 bar Maximum pressure 400 bar For commercial vehicles Open circuit Features Variable pump
More informationHYDRAULIC MOTORS EPRM
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More information