HYDRAULIC MOTORS EPMS - series 3
|
|
- Oswin Fisher
- 5 years ago
- Views:
Transcription
1 HYDRAULIC EPMS - series APPLICATION» Conveyors» Metal working machine» Machines for agriculture» Road building machines» Mining machinery» Food industries» Special vehicles etc. CONTENTS Specification data Function diagrams Dimensions and mounting Wheel motor... 7 Motor with Drum brake- EPMSB... 7 Shaft extensions Tacho connection Motor with Speed Sensor... Permissible shaft loads Function diagram for EPMSB Dimensions and mounting- EPMSS, V Internal Spline data Order code GENERAL OPTIONS» Model- Disc valve, roll-gerotor» Flange and wheel mount» Short motor» Motor with Drum Brake» Tacho connection» Speed sensoring» Side and rear ports» Shafts- straight, splined and tapered» Metric and BSPP ports» Other special features Displacement, [cm /rev.] Max. Speed, [RPM] Max. Torque, [danm] Max. Output, [kw] Max. Pressure Drop, [bar] Max. Oil Flow, [l/min] Min. Speed, [RPM] Permissible Shaft Loads, [dan] Pressure fluid O Temperature range, [C] Optimal Viscosity range, [mm /s] Filtration, 64,9 1 6,9 P = a Mineral based- HLP(DIN 14) or HM(ISO 674/4) - 9 ISO code /16 (Min. recommended fluid filtration of micron) Pressure drop (bar) Oil flow in drain line Viscosity (mm /s) Oil flow in drain line (l/min) 1, 1 Pressure Losses P bar Q, l/min 6
2 SPECIFICATION DATA EPMS EPMS EPMS 1 EPMS 16 EPMS Displacement [cm /rev.] Max. Speed, [RPM] Max. Torque [danm] Max. Output [kw] Max. Pressure Drop [bar] Max. Oil Flow [l/min] Max. Inlet Pressure [bar] Max. Return Pressure without Drain Line or Max. Pressure indrainline,[bar] Max. Return Pressure with Drain Line [bar] peak** int.* peak** peak** - RPM - RPM > RPM -max. RPM peak** Max. Starting Pressure with Unloaded Shaft, [bar] Min. Starting Torque at max. press. drop [danm] at max. press. drop Min. Speed***, [RPM] Weight, [kg] EPMS(F) EPMSW For Rear Ports EPMSS(Z) +,4 kg EPMSV EPMSQ EPMSB, , , 19,4 9,9,4 7,9,, 16, , 19, 6 9,9 6,4,1,6,1 6, 17,1 1, , ,4,9,4 6,, 17,4 19, , 1, 1, 1,9 9 6,9 4,, 11,, 6,7 11, 17, , 4, 6 11, 11,7 9, 7,1 11,6 1, * Intermittent operation: the permissible values may occur for max. % of every minute. ** Peak load: the permissible values may occur for max. 1% of every minute. *** For speeds of RPM lower than given, consult factory or your regional manager. 1) Intermittent speed and intermittent pressure must not occur simultaneously. ) Recommended filtration is per ISO cleanliness code /16. A nominal filtration of micron or better. ) Recommend using a premium quality, anti-wear type mineral based hydraulic oil HLP(DIN14) or HM (ISO 674/4). If using synthetic fluids consult the factory for alternative seal materials. 4) Recommended minimum oil viscosity 1 mm²/s at operating temperatures. ) Recommended maximum system operating temperature is C. 6) To assure optimum motor life fill with fluid prior to loading and run at moderate load and speed for minutes. 6
3 SPECIFICATION DATA (continued) EPMS EPMS 1 EPMS 4 EPMS 4 EPMS EPMS 6 Displacement [cm /rev.] Max. Speed, [RPM] Max. Torque [danm] peak** Max. Output [kw] Max. Pressure Drop [bar] int.* peak** Max. Oil Flow [l/min] Max. Inlet Pressure [bar] peak** Max. Return Pressure - RPM without Drain Line or - RPM Max. Pressure > RPM indrainline,[bar] -max. RPM Max. Return Pressure with Drain Line [bar] peak** Max. Starting Pressure with Unloaded Shaft, [bar] Min. Starting Torque [danm] at max. press. drop at max. press. drop Min. Speed***, [RPM] Weight, [kg] EPMS(F) EPMSW For Rear Ports EPMSS(Z) +,4 kg EPMSV EPMSQ EPMSB , ,7 1, 9,7 7,6 1,1 1,7 14, , 1, ,4 1,9,4, 1, 19, , 1, 11, 9, 1,7, 474, ,4 11, ,4 14,6 1,1 14, 1,1, ,6, ,6 1,1 1,6, 1, 1,6 64, ,9 9, , 1,9 1,4 * Intermittent operation: the permissible values may occur for max. % of every minute. ** Peak load: the permissible values may occur for max. 1% of every minute. *** For speeds of RPM lower than given, consult factory or your regional manager. 1) Intermittent speed and intermittent pressure must not occur simultaneously. ) Recommended filtration is per ISO cleanliness code /16. A nominal filtration of micron or better. ) Recommend using a premium quality, anti-wear type mineral based hydraulic oil HLP(DIN14) or HM (ISO 674/4). If using synthetic fluids consult the factory for alternative seal materials. 4) Recommended minimum oil viscosity 1 mm²/s at operating temperatures. ) Recommended maximum system operating temperature is C. 6) To assure optimum motor life fill with fluid prior to loading and run at moderate load and speed for minutes. 64
4 SPECIFICATION DATA for EPMS...LSV Low Speed Valve (LSV) LSV Series hydraulic motors have been designed to operate with normal pressure drop and to ensure smooth run at low speed (up to min ), as the best security for operation is guaranteed at frequency of rotation min. They have an increased starting pressure drop and are not recommended for using at pressure less than 4 bars. Look at specification data for hydraulic motors standard version. The modification concerns only the following parameters : maximum speed, maximum output, maximum Oil flow and maximum starting pressure. EPMS EPMS EPMS 1 EPMS 16 EPMS EPMS EPMS 1 EPMS 4 Max. Speed, [RPM] Max. Output [kw] Max. Oil Flow [l/min] Cont. Cont. Cont.,6, 16 4,6 6,7 6,,4, 1, 4, 1,4 4 9,1 1, 6,,6 1, 6 1 9, 1, 9 Max. Starting Pressure with Unloaded Shaft, [bar] SPECIFICATION DATA for EPMS...LL Low Leakage (LL) LL Series hydraulic motors have been designed to operate at the whole standard range of working conditions (pressure drop and frequency of rotation ), but with considerable decreased volumetric losses in the drainage ports. Their main purpose is to operate as series-connected motors in hydraulic systems. For this version is permissible decreasing of the maximal torque with up to % (at middle speed) and up to % (at high speed) in comparison to the standard versions of motors. Look at specification data for hydraulic motors standard version. The modification concerns only the parameters: maximum torque, maximum output, minimum starting torque. Max. Torque Cont. [danm] Max. Output Cont. [kw] Min. Starting Torque Cont. [danm] EPMS EPMS EPMS 1 EPMS 16 EPMS EPMS EPMS 1 EPMS 4 19,,4 16, 19, 1,9 1, 7, 1,1 1,,,,9,6 9, 19,4 4,6, 1, 4, 4,9 17,6 1,,9 9,6 44,,4 1,6,4 6,9 47, 4,7 61,4 1,1,4 9,1,1 1, 6,,6 1, 41, 49,,1 6,6 9, 1, 44,7, 6
5 FUNCTION DIAGRAMS EPMS M danm Q= l/min l/min l/min l/min 4 l/min l/min 6 l/min l/min 1 int. kw kw 4kW 6kW kw t =% 1 kw 1 kw 1 kw 1 kw p= bar bar bar bar bar N=1 kw % 7 bar 7% int. bar n min (rpm) EPMS M danm Q= l/min l/min l/min l/min 4 l/min l/min 6 l/min l/min 9 l/min 1 int. kw N=1 kw % t =% 7% kw 4kW 6kW kw 1 kw 4 kw 1 kw 1 kw 1 kw int. p= bar bar bar bar bar bar 7 bar bar n min (rpm) The function diagrams data was collected at back pressure bar and oil with viscosity of mm²/s at C. 66
6 FUNCTION DIAGRAMS EPMS 1 M danm Q= l/min l/min l/min l/min 4 l/min l/min 6 l/min l/min 9 l/min 4 4 int. 4kW 6kW kw kw 1 kw 1 kw 1 kw 1 kw 4 kw p= bar bar bar bar 1 kw bar N=1 kw t =% % 7% int bar bar n min (rpm) EPMS 16 M danm int. Q= l/min l/min l/min kw N=1 kw % l/min 4 l/min l/min 6 l/min 4kW 6kW kw t =% 7% kw l/min 1 kw 1 kw kw 9 l/min 1 kw int. 6 p= bar bar bar 1 bar bar 7 bar bar n min (rpm) The function diagrams data was collected at back pressure bar and oil with viscosity of mm²/s at C. 67
7 FUNCTION DIAGRAMS EPMS M danm Q= l/min l/min l/min l/min 4 l/min l/min 6 l/min l/min 9 l/min int. p= bar p= bar 1 kw p=16 bar 1 kw bar kw 1 kw kw 1 bar 4kW kw 6kW N=1 kw 7 bar t =% % bar 7% int. n min (rpm) EPMS M danm Q= l/min l/min l/min l/min 4 l/min l/min 6 l/min l/min 9 l/min int. N=1 kw kw 4kW 6kW kw 1 kw kw 1 kw p= bar p=1 bar p= bar 1 bar 9 bar 7 bar t =7% % % 7% bar int. n 1 min (rpm) The function diagrams data was collected at back pressure bar and oil with viscosity of mm²/s at C. 6
8 EPMS 1 FUNCTION DIAGRAMS M danm 7 Q= l/min l/min l/min l/min 4 l/min l/min 6 l/min l/min 9 l/min int. kw 4kW 6kW kw kw 14 kw 1 kw p= bar 1 bar bar bar 1 N=1 kw 6 bar 4 bar t =% % bar 7% int. n 1 min (rpm) M danm int. EPMS 4 Q= l/min l/min l/min l/min 4 l/min l/min 6 l/min l/min 9 l/min N=1 kw kw t =% 4kW % 1 1 min (rpm) % 6kW 7% kw kw 1 kw int. p=1 bar bar 9 bar 7 bar, bar bar 17, bar n The function diagrams data was collected at back pressure bar and oil with viscosity of mm²/s at C. 69
9 DIMENSIONS AND MOUNTING DATA max L L 1 L T Porting Side Ports Mounting SAE A-4 Mount (4 Holes) C 4xø1, ø6,4±, P (A,B) max N* ±, E Rear Ports max L plugged A SAE A- Mount ( Holes) xø1, P (A,B) ±, max N* *For N see page 74 C: xm mm depth P(A,B) : xg1/ or xmx1, mm depth T: G ¼ or M14x1,- 1 mm depth (plugged) Standard Rotation Pressurized - CW Pressurized - CCW Reverse Rotation Pressurized - CCW Pressurized - CW EPMS(A) EPMS(A) EPMS(A) 1 EPMS(A) 16 EPMS(A) EPMS(A) EPMS(A) 1 EPMS(A) 4 EPMS(A) 4 EPMS(A) EPMS(A) L,mm L,mm EPMS(A)E EPMS(A)E EPMS(A)E 1 EPMS(A)E 16 EPMS(A)E EPMS(A)E EPMS(A)E 1 EPMS(A)E 4 EPMS(A)E 4 EPMS(A)E EPMS(A)E , ,4 1, 7, 4, 4, 4, 69,4,6 74, 9, 7
10 DIMENSIONS AND MOUNTING DATA max L L 1 L T Porting Side Ports Mounting F Magneto Mount (4 Holes) C 4xø1, P (A,B) max N* ø6,4±, E Rear Ports Q Square Mount (4 Holes) max L ±, plugged ±,4 4xø11, P (A,B) ±, ø6,4±, max N 1 * *For N and N 1 see page 74 C: xm mm depth P(A,B) : xg1/ or xmx1, mm depth T: G ¼ or M14x1,- 1 mm depth (plugged) Standard Rotation Pressurized - CW Pressurized - CCW Reverse Rotation Pressurized - CCW Pressurized - CW EPMSF EPMSF EPMSF 1 EPMSF 16 EPMSF EPMSF EPMSF 1 EPMSF 4 EPMSF 4 EPMSF EPMSF L,mm EPMSQ EPMSQ EPMSQ 1 EPMSQ 16 EPMSQ EPMSQ EPMSQ 1 EPMSQ 4 EPMSQ 4 EPMSQ EPMSQ L,mm EPMSFE EPMSFE EPMSFE 1 EPMSFE 16 EPMSFE EPMSFE EPMSFE 1 EPMSFE 4 EPMSFE 4 EPMSFE EPMSFE ,9 7 EPMSQE EPMSQE EPMSQE 1 EPMSQE 16 EPMSQE EPMSQE EPMSQE 1 EPMSQE 4 EPMSQE 4 EPMSQE EPMSQE ,9 69 L,mm ,4 1, 7, 4, 4, 4, 69,4,6 74, 9, 71
11 DIMENSIONS AND MOUNTING DATA -EPMSW W Wheel Mount max N T max L L L 1 9 C P (A,B) C: xm mm depth P (A,B): xg1/ or xmx1, mm depth T: G ¼ or M14x1, - 1 mm depth(plugged) E Rear Port *For N see page 74 Standard Rotation Pressurized - CW Pressurized - CCW plugged Reverse Rotation Pressurized - CCW Pressurized - CW EPMSW EPMSW EPMSW 1 EPMSW 16 EPMSW EPMSW EPMSW 1 EPMSW 4 EPMSW 4 EPMSW EPMSW ,9 1 L,mm 1 L,mm ,4 91 1, 9 7, 1 4, 4, 117 4, 1 69,4 14, , 147,9 9, 171 EPMSWE EPMSWE EPMSWE 1 EPMSWE 16 EPMSWE EPMSWE EPMSWE 1 EPMSWE 4 EPMSWE 4 EPMSWE EPMSWE ,6 7
12 DIMENSIONS AND MOUNTING DATA -EPMSB A B Actuating the brake level, the brake shaft is turned. The rectangular shape of the inner part of this shaft forces the brake pads to be pressed against the brake drum. This brakes the wheel or the winch drum. Releasing the level, the springs pull it and the brake pads back to the initial position. The motor output shaft is released. Minimum angle adjustment is. It can be adjusted by dismounting the level. Depending on the application You can choose the actuating direction of the brake level. The rod connection actuating the brake should be capable of moving at last mm from neutral to extreme position. B Motor with Drum Brake M D EPMSBR EPMSBL P L P L T C P (A,B) E Rear Port C: xm mm depth F: Inspection hole for checking brake lining T: G 1/4 or M14x1, - 1 mm depth (plugged) P : xg1/ or xmx1, mm depth (A,B) P (A,B) Standard Rotation Pressurized - CW Pressurized - CCW Reverse Rotation Pressurized - CCW Pressurized - CW plugged EPMSB EPMSB EPMSB 1 EPMSB 16 EPMSB EPMSB EPMSB 1 EPMSB 4 EPMSB 4 EPMSB EPMSB ,9 L,mm ,4 1, 7, 4, 4, 4, 69,4,6 74, 9, L,mm ,9 1 EPMSBE EPMSBE EPMSBE 1 EPMSBE 16 EPMSBE EPMSBE EPMSBE 1 EPMSBE 4 EPMSBE 4 EPMSBE EPMSBE ,9 11 7
13 C - ø straight, Parallel key Axx4 DIN 6 Max. Torque 77 danm SHAFT EXTENSIONS K - tapered 1:, Parallel key B6x6x DIN 6 Max. Torque 9 danm S=41 Tightening torque ±1 danm ø -,9 ø4,±,1 6,±,4 N=67, N =4,; N =4 1 ±,4 N=67, N =4,; N =4 1 +, CO- ø1¼" straight, Parallel key 16 "x 16 "x 1¼"BS46 Max. Torque 77 danm SH - ø1¼" splined 14T, DP1/4 ANSI B Max. Torque 9 danm 6 + ø ø1, -, ±,4 N=7, N =44,; N =94 1 SL - ø4, p.t.o. DIN 9611 Form 1 Max. Torque 77 danm ±,4 M min 16 Deep 76±1 ±, 6,±,4 N=67, N =4,; N =4 1 - Motor Mounting Surface N-for standart,a and F flange N1 - for Q flange N - for W flange N=1 N =96,; N =146 1 WITH TACHO CONNECTION 74
14 1 max max EPMS Hall sensor WITH SPEED SENSOR M1x1 max TECHNICAL DATA OF THE SPEED SENSOR Technical data Output signal Frequency range Output Power supply Current input Current load Ambient Temperature Protection Plug connector Mounting principle Pulses per revolution... Hz PNP, NPN...6 VDC ma VDC) ma VDC;4 C) minus 4... plus 1 C IP 67 M1-Series ISO U high>ud.c. -V U <V low U f 1 f f 1=f±% Load max.:i high=i low<ma No load current, max: ma f PNP Wiring diagrams NPN R =U /I (=ma) Load d.c. max Stik type 4 Terminal No. Connection U d.c. No connection V Output signal
15 PERMISSIBLE SHAFT LOADS The output shaft runs in tapered bearings that permit high axial and radial forces. Curve "1" shows max. radial shaft load. Any shaft load exceeding the values quoted in the curve will seriously reduce motor life. The two other curves apply to a B bearing life of hours at RPM. P max=dan a max 67,1 Prad dan 1 P =dan a P max=dan a max 4 P max=dan a mm P max=dan a PL [dan] 1 FUNCTION DIAGRAM EPMSB M B PL - Brake Lever Load MB - Brake Torque M - Brake Lever Torque D 6 4 M D M [danm] D M [danm] B
16 DIMENSIONS AND MOUNTING DATA -EPMSS and EPMSV max L L L 1 T Porting Side Ports C Mounting S Short Mount min, max 7,1 4xø11 P (A,B) 6±, E Rear Ports max L V Very Short Mount max L max ±, plugged 7 P (A,B) ±, Drain port min 4, max 4,6 C: xm mm depth P(A,B) : xg1/ or xmx1, mm depth T: G ¼ or M14x1,- 1 mm depth (plugged) Standard Rotation Pressurized - CW Pressurized - CCW Reverse Rotation Pressurized - CCW Pressurized - CW EPMSS EPMSS EPMSS 1 EPMSS 16 EPMSS EPMSS EPMSS 1 EPMSS 4 EPMSS 4 EPMSS EPMSS ,9 9 L,mm L,mm EPMSSE 14 EPMSV 91 EPMSVE ,9 167 EPMSSE EPMSSE 1 EPMSSE 16 EPMSSE EPMSSE EPMSSE 1 EPMSSE 4 EPMSSE 4 EPMSSE EPMSSE ,6 1 EPMSV EPMSV 1 EPMSV 16 EPMSV EPMSV EPMSV 1 EPMSV 4 EPMSV 4 EPMSV EPMSV ,9 1, , , 16 EPMSVE EPMSVE 1 EPMSVE 16 EPMSVE EPMSVE EPMSVE 1 EPMSVE 4 EPMSVE 4 EPMSVE EPMSVE , 11 L,mm ,4 1, 7, 4, 4, 4, 69,4,6 74, 9, 77
17 DIMENSIONS OF THE ATTACHED COMPONENT For EPMSS I T F H J F: Oil circulation hole H: Hardened stop plate I: O- Ring xmm J: 4xM6 mm depth, 9 T: Drain connection G1/4 or M14x1, For EPMSV E H E: External drain hole H: Hardened stop plate I: O- Ring xmm DRAIN CONNECTION A drain line ought to be used when pressure in the return line can exceed the permissible pressure. It can be connected: - For EPMSS at the drain port of the motor; - For EPMSV at the drain connection of the attached component. The maximum pressure in the drain line is limited by the attached component and its shaft seal. The drain line must be possible for oil to flow freely between motor and attached component and must be led to the tank. The maximum pressure in the drain line is limited by the attached component and its seal. 7
18 INTERNAL SPLINE DATA FOR THE ATTACHED COMPONENT Standard ANSI B9.1976, class [ m=.1166; corrected x.m=+,] Fillet Root Side Fit mm Number of Teeth z 1 Diametral Pitch DP 1/4 Pressure Angle O Pitch Dia. D,4 Major Dia. Dri, -,1 Minor Dia. Di, +, Space Width [Circular] Lo 4,±, Fillet Radius Rmin, Max. Measurement between Pin L 17,6 +,1 Pin Dia. d 4,±,1 Above are when hardened ORDER CODE Hardering Specification: HRC 6± Effective case depth ( HRC ),7±, mm Materiall MoCr4 DIN 17 or better EPMS Pos.1 - Mounting Flange omit - SAE A-4 mount, four holes A F Q B S V W Pos. - Port type omit - Side ports E - Rear ports Pos. - Displacement code -, [cm /rev] -, [cm /rev] 1-1,7 [cm /rev] 16-19,7 [cm /rev] -, [cm /rev] -, [cm /rev] 1-14,9 [cm /rev] 4-97, [cm /rev] 4-474,6 [cm /rev] -,7 [cm /rev] 6-64,9 [cm /rev] Pos.4 - Shaft Extensions* C - ø straight, Parallel key Axx4 DIN6 CO - ø1¼" straight, Parallel key / x / x1¼ BS46 K SL SH - SAE A- mount, two holes - Magneto mount, four holes - Square mount, four holes - Motor with drum brake - Short mount - Very short mount - Wheel mount ø tapered 1:, Parallel key B6x6x DIN6 - ø4, p.t.o. DIN 9611 Form 1 - ø1¼" splined 14T ANSI B Pos. - Ports omit - BSPP (ISO ) M - Metric (ISO 6) Pos. 6 - Actuating Direction** R L - Right - Left Pos. 7 - Speed Monitoring omit - none - with tacho connection T RS-P RS-N (only for side ports) - with speed sensor (PNP pull-down resistor) - with speed sensor (NPN pull-up resistor) Pos. - Special Features (see Specification data-page 6) omit - none LL -Low Leakage LSV - Low Speed Valve Pos. 9- Rotation omit - Standard Rotation R - Reverse Rotation Pos. - Option (Paint)*** omit P PC - no Paint - Painted - Corrosion Protected Paint Pos.11 - Design Series omit - Factory specified NOTES: * The permissible output torque for shafts must be not exceeded! ** Only for EPMSB *** Color at customer's request. The hydraulic motors are mangano-phosphatized as standard. 79
HYDRAULIC MOTORS EPMS
HYDRAULIC EPMS APPLICATION» Conveyors;» Metal working machines;» Machines for agriculture;» Road building machines;» Mining machinery;» Food industries;» Special vehicles etc. CONTENTS Specification data...
More informationHYDRAULIC MOTORS EPMT
HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationHYDRAULIC MOTORS EPM. Cutaway of EPM Motor. Cutaway of EPMN Motor. EPM, EPMW(N) Series with Check Valves A. EPM 25, 32, 40 Series without Check Valves
HYDRAULIC EPM The series of EPM motors have a low speed, high torque capability. Converting hydraulic energy into mechanical energy they are used where the power up to 11 kw is needed. These units provide
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationUŽSISAKYK internetu - el. paštu - telefonu
HYDRAULIC UŽSISAKYK internetu - www.dominga.lt/eshop el. paštu - info@dominga.lt telefonu - +70 52 2221 APPLICATION»»»»» Conveyors Textile machines» Mining machinery Machine tools Ventilators Construction
More informationHYDRAULIC MOTORS EPRM
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationHEAVY DUTY HYDRAULIC MOTORS
HEAVY DUTY HYDRAULIC MTRS CNTENTS Page Hydraulic Motors Series MSWM... 4 Hydraulic Motors Series MTK... 8 Hydraulic Motors Series MTM... 17 Hydraulic Motors Series TMF... 9 Hydraulic Motors Series MVM...
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More informationSPOOL VALVE HYDRAULIC MOTORS
SPOOL VALVE HYDRAULIC The operating principle of the motors is based on an internal gear design, consisting of a stator and rotor through which the output torque and speed are transmitted. The distributor
More informationHYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS
HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MP APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery
More informationPlanetenmotor Serie MP
Planetenmotor Serie MP Bestellnr. Typ Code - Planetenmotor 25ccm-W:Ø25-HD MP25CD -5 Planetenmotor 2ccm-W:Ø25-HD MP2CD -1 Planetenmotor 9,7ccm-W:Ø25-HD MP4CD -115 Planetenmotor 49,5ccm-W:Ø25-HD MP5CD -1
More informationHYDRAULIC MOTORS INDEX HYDRAULIC MOTORS. APPLICATION SPECIFICATION AND GENERAL INFORMATION. General-01 General-02
HYDRAULIC MOTORS INDEX HYDRAULIC MOTORS MOTOR TYPE OM.. OM-1 OM- MOTOR TYPE OP.. OP-1 OP-17 MOTOR TYPE OP..NA... OP..NA-1 OP..NA- MOTOR TYPE OZ.. OZ-1 OZ-2 MOTOR TYPE OR.. OR-1 OR-17 MOTOR TYPE OK.. OK-1
More informationHYDRAULIC MOTOR-BRAKE B/MR
HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22
More informationHEAVY DUTY HYDRAULIC MOTORS
HEAVY DUY HYDRAULIC MRS CNENS Page Hydraulic Motors Series MLHSEM... 4 Hydraulic Motors Series MK... 8 Hydraulic Motors Series MLHM... 17 Hydraulic Motors Series MF... 9 Hydraulic Motors Series MVM...
More informationDISC VALVE HYDRAULIC MOTORS
LHS LH LHV DISC VALVE HYDRAULIC CONENS Page Hydraulic otors Series LHS... 4 Hydraulic otors Series LH... 2 Hydraulic otors Series LHV... 9 Hydraulic otors Series LHHW... 1 otor Special Features... 7 otors
More informationHYDRAULIC MOTORS HP APPLICATION GENERAL. » Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines
HYDRAULIC HP APPLICAION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» extile machines» Agricultural machines» Food industries» Grass cutting machinery etc. CONENS Specification
More informationSPECIAL HYDRAULIC MOTORS AND MOTOR-BRAKES
SPECIAL HYDRAULIC AND MTRBRAKES CNTENTS Page Hydraulic Motors Series HP... Hydraulic Motors Series HR...11 Hydraulic Motors Series MLHRW...1 Hydraulic Motors Series...2 Hydraulic Motorbrakes Series BHR...3
More informationHydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified
SOOL VALVE HYDAULI MOOS Quality assured company - ISO 9001 ertified SOOL VALVE - he distributor valve has been integrated with the output shaft. he valve has hydrodynamic bearings, and has infinite life
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature
More informationHYDRAULIC MOTORS GENERAL INFORMATION
GENERAL INFORMATION MGL... Document: HM-1-Dec 2012 Applications: -Agricultural harvesters and seeders -Conveyors -Machine tools -Food industries -Turn equipment -Brush drivers -Sweepers and floor polishers
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Yes Yes Yes Yes Yes Yes Standard Yes Yes Yes Yes Yes Yes P.t.o. Yes Yes
More informationTMF 600 ( cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationCONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRAULI IS S LB, LBS, LBV- Wet APPLIAION» Heavy uty machinery» Wheel drives» Material handling» Mining» Agricultural machines» onveyors» oor openers and swing drives etc. GENERAL Fluid type O O emperature
More informationHYDRAULIC MOTORS EPMSY
HYDRAULIC NEW is the ew hydraulic motor i a family of "disc valve" series which has dimesios ad moutig data the same as at hydraulic motors type EPS. This motor is described with % hidger techical data-max.
More informationHYDRAULIC DISC BRAKES LB, LBS, LBV- Wet
HYRULI IS S LB, LBS, LBV- Wet PPLITION» Heavy uty machinery» Wheel drives» Material handling» Mining» gricultural machines» onveyors» oor openers and swing drives etc. GENERL Fluid type O O Temperature
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationOMP Hydraulic Motor Versions
Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X
More informationAPPLICATION. » Metal working machine» Machines for agriculture» Road building machines» Mining machinery» Food industries. P bar
HYDRAULIC S APPLICATION» Coveyors» etal workig machie» achies for agriculture» Road buildig machies» iig machiery» Food idustries» Special vehicles etc. CONTENTS Specificatio data... 6 Fuctio diagrams...
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationRE / Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW. Hydraulik Nord. Contents 1/26
RE14 6/3.96 Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW RE 14 6/3.96 Standard motor type GMS Standard motor type GMT Short motor type GMTS Contents Name page Characteristics,
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (E2) 4 Bolt Square (E4)
Gerolor Motors BMRS Series Size CC-A Flange Options-B Shaft Options-C Ports Features 100 100 1 1 1 1 200 200 2 3 2 3 3 3 SAE A 2 Bolt - (E2) 4 Bolt Square (E4) 1-1/4" Keyed (G) 32mm Keyed (B) 1-1/4' 14T
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationACCESSORIES CONTENTS. HYDRAULIC DISC BRAKE for MP, MR and MS type LB/
ESSORIES ONTENTS age HYDRULI DIS RKE for M, MR and MS type L/288... 3 HYDRULI DIS RKE for MSS type LS/289(290) and MSV type LV/289(290)... 6 HYDRULI DIS RKE for MTS type LS/314(315) and MTV type LV/314(315)...
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationOMEW Hydraulic Motor Versions
Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X
More informationFixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationVane motor high performance hydraulic series M5B - M5BS - M5BF
Vane motor high performance hydraulic series M5B - M5BS - M5BF Publ. 2 - AM172 - B 1 / 25 / FB Replaces : 2 - AM172 - A L11-2172 - 2 CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12 vanes and a patented
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More informationHYDRAULIC MOTORS MH APPLICATION GENERAL. » Agriculture machines» Food industries» Mining machinery etc. » Conveyors
HYDRAULIC APPLICATION» Coveyors» Feedig mechaism of robots ad maipulators» etal workig machies» Textile machies» Agriculture machies» Food idustries» iig machiery etc. CONTENTS Specificatio data... 77
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4)
Gerolor Motors S Series Size CC-A Flange Options-B Shaft Options-C Ports Features S S S S S S S S2 2 S31 31 S0 0 SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4) 1.0" Keyed (R) mm Keyed (A) 1.0'
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Char-Lynn Disc Valve Hydraulic Motors. h y d r a u l i c s
H y d r a u l i c s ydraulics Char-Lynn Disc Valve Hydraulic Motors h y d r a u l i c s 4000 Compact Series Standard, Wheel, and Bearingless Hydraulic Motors We Manufacture 11-01-113 EN-0400 Solutions
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HM(HD)B 270 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single
More informationExternal gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
More informationEaton Char-Lynn Low Speed, High Torque Motors. Orbit motor
Eaton Char-Lynn Low Speed, High Torque Motors Orbit motor Table of Contents Description Page No. H & S Series 3 Features 3 Model code 3 H Series 4-9 Specifications 4 Performance 5 Dimensions and mount
More informationSpool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.
Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool
More informationHigh Torque Low Speed Motors MR - MRE
High Torque Low Speed Motors MR - MRE Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationLow Speed High Torque Motors
Low Speed High Torque Motors Catalogue HY29-0503/UK TABLE OF CONTENTS Table of contents Features General information Functional description Technical data 3 4 4 5 6 FRAME SIZE P Operating diagrams Overall
More informationHYDRAULIC MOTORS MLHT
HYDRAULIC OORS LH APPLICAION» Coveyors» etal workig machies» Agriculture machies» Road buildig machies» iig machiery» Food idustries» Special vehicles etc. CONENS Specificatio data...... 26 27 Performace
More informationHydraulic Motor BMT & BMTS
UID CMPNENTS, INC. Hydraulic Motor BMT & BMTS The BMT & BMTS series motors adapt the advanced RRTRC gear set design with DISC distribution flow and high pressure. These motors can be supplied with various
More informationRE 91808/ AA4VSE Plug-in dual displacement motor. High pressure range. Series 10 Axial piston swashplate design, SAE model
AA4VSE Plug-in dual displacement motor Series Axial piston swashplate design, SAE model RE 91808/09.90 RE 91808/09.90 Brueninghaus Hydromatik Size 250 Nominal pressure 350 bar Peak pressure 400 bar High
More informationVINCKE HYDRAULIC PUMPS
: VNK BA10VS 21 Variable displacement axial piston pump of swashplate design for hydraulic open circuit systems. Flow is proportional to drive speed and displacement. It can be infinitely varied by adjustment
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationÀ cylindrée fixe Gamme MAP 50
pplications Moteur à pistons axiaux M+S À cylindrée fixe Gamme MP Cylindrée de 6,6 à cm Vitesse de rotation maxi de tmin Couple maxi danm Puissance maxi 6 Kw ébit d huile maxi : 9 lmin Charge axiale maxi
More informationAP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More informationRE / Gerotormotors (Low Speed High Torque Motors) Type GMP, GMR, GMVD. Hydraulik Nord. Contents 1/32. Replaces:
Gerotormotors (Low Speed High Torque otors) Type GP, GR, GVD RE 14 7/3.96 RE 14 7/11.96 Replaces: 3.96 Characteristics: Very smooth running, even at low speeds Wide speed range Constant output torque over
More informationSpool Valve Hydraulic Motors Series J
Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port
More informationFixed Displacement Radial Piston Hydraulic Motor Staffa, Series B
Size 50 to 11,600 cc/rev, up to 250 bar, 36,000Nm, 240kW Fixed Displacement Radial Piston Hydraulic Motor, Series B GB Features Rugged, reliable, proven design. Unique Hydrostatic balancing provides minimum
More informationAxial Piston Variable Pump AA4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump AA4VG RA 92003-A/06.09 1/64 Replaces: 03.09 Data sheet Series 32 Size 28...
More informationH1 Axial Piston Tandem Pumps Size 045/053
MAKING MODERN LIVING POSSIBLE Technical Information H1 Axial Piston Tandem Pumps Size 045/053 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2015 Master Model
More informationVariable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationJ Series (129-) Highlights
Highlights Features: Constant clearance Geroler set Integrated check valves Thrust Bearing Bushing Port B Port A Self-lubricating shaft bushing High-strength rigid components Increased valve seal lands
More informationMobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
More informationMOMV SERIES HYDRAULIC MOTOR
MOMV SERIES HYDRAULIC MOTOR MOMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationFixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2014 Converted
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More informationPVX-11 VANE PUMPS. See pages 12 thru 14 for PVX-11 dimensions. VARIABLE DISPLACEMENT, PRESSURE COMPENSATED PERFORMANCE SPECIFICATIONS
PVX-11 VANE PUMPS VARIABLE DISPLACEMENT, COMPENSATED NOTE: See pages thru 14 for PVX-11 dimensions. PERFORMANCE SPECIFICATIONS Displacement (Nominal) 1.5 in 3 /rev. (25 cm 3 /rev.) Displacement (Actual)
More information