Gear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs

Transcription

1 Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding

2 Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page 4-2- Series 600 Cast-Iron PGP 600 Characteristics...3 PGP 620 Ordering code PGP 640 Ordering PGP 620 Performance data...8 PGP 640 Performance Curves...9 PGP 620 Technical Data / Dimensions Mounting flange options Port options Drive shaft options PGP 640 Technical Data / Dimensions Mounting flange options Port options Drive shaft options...25 PGP 600 Shaft Loads / Fluids / Seal Kits...26 List of available pump combinations...27 Valve options PGP 600 Pressure relief valve / adjustable internal vent...28 Valve options / Ordering code...29 Priority Flow Divider, Valve options / Ordering code Side Mounted Priority Flow Divider (Load Sense or Fixed Flow)...31 Load Sensing Priority Valve Parker Hannifin Corporation

3 Characteristics Series PGP, PGM 600 Over many years Parker Hydraulics has supplied gear pumps and motors for mobile and industrial markets worldwide, especially for materials handling, commercial grass cutting and construction equipment applications. Many Parker pumps and motors have been developed and tested for the specific needs of these industries. Parker s defined strategy to provide engineered solutions, coupled with an award winning flexible manufacturing system, has resulted in a wide range of SAE/DIN/European and other special options being available as standard. Features Patented interlocking body design 12 tooth gears, bronze balance plates Tandem, triple and cross-frame pumps available Common inlets available for tandem and triple pumps Continuous operating pressures up to 310 bar Production run-in available to suite OEM application conditions and to provide optimized volumetric efficiencies Pressure balanced design for high efficiency Reduced system noise levels compared to earlier models High power through-drive capability Wide range of integral valves for power steering, power brakes, fan drivers and implement hydraulics Load sense and solenoid operated unloading valves 4 Characteristics Pump type Mounting Ports Shaft style Speed Theor. displacement Drive Axial / Radial load Inlet pressure Outlet pressure Flow velocity Heavy-duty, cast iron, external gear. SAE, rectangular, thru-bolt standard specials on request. SAE and metric split flanges and others SAE splined, keyed, tapered, cylindrical tang drive, specials on request rpm, see Technical Data See Technical Data Drive direct with flexible coupling is recommended. Units subject to axial or radial loads must be specified with an outboard bearing. Operating range 0.8 to 2 bar abs. Min. inlet pressure 0.5 bar abs. Short time without load. Consultation is recommended. See Technical Data See Nomograph for Pipe Velocity Hydraulic fluids Hydraulic oil HLP, DIN Fluid temperature Range of operating temperature -15 to +80 C. Max. permissible operating pressure dependent on fluid temperature. Temperature for cold start -20 to -15 C at speed 1500 rpm. Fluid viscosity Range of ambient temperature Range of operating viscosity 8 to 1000 mm²/s. Max. permissible operating pressure dependent on viscosity. Viscosity range for cold start 1000 to 2000 mm²/s at operating pressure p 10 bar and speed n 1500 rpm. -40 C to +70 C Filtration According to ISO 4406 Cl. 18/16/13 Direction of rotation (looking at the drive shaft) Multiple pump assemblies Separate or common inlet capability Clockwise, counter-clockwise or double. Attention! Drive pump only in indicated direction of rotation. Available in two or three section configuration. Max. shaft load must be conform to the limitations shown in the shaft loading rating table in this catalogue. Max. load is determined by adding the torque values for each pumping section that will be simultaneously loaded. Separate inlet configuration: Each gear housing has individual inlet and outlet ports. Common inlet configuration: Two gear sets share a common inlet Parker Hannifin Corporation

4 Ordering code Series PGP 620 PG 620 1) Gear Design Type Unit Displacement Rotation Shaft Flange Shaft Seal Side Suction Port Side Pressure Port Rear Suction Port 2) Rear Pressure Port 2) P Type Pump A B Unit Pump Single unit Multiple unit Displacement ccm * 36* * 41* ** 45** 0500* 50* * PGP, PGM 620 and PGP 625 **PGP 625 only C A B Rotation Clockwise Counter clockwise bi-directional X N V M W Shaft Seal No seal NBR FPM, FKM Double NBR Double FPM Shaft D1 13T, 16/32DP, 41.2L, SAE "B" spline E1 15T, 16/32DP, 46L, SAE "B-B" spline M3 Ø25.4, 6.3 Key, M8, 46L, SAE "B-B", parallel T1 Ø21.59, 11.2L, 4.0 Key, M14x1.5, taper 1:8 T2 5) Ø25.0, 12L, 5.0 Key, M16x1.5, taper 1:5 5) Non standard, on request only Not all variances of ordering codes can be offered. Please check available part numbers first. For not yet implemented part numbers or special requests please contact Parker Hannifin. 1) Available as PGP 625 with 36, 41, 45 and 50 cc/rev only. 2) Only coded for the last section Parker Hannifin Corporation

5 Ordering code Series PGP, ) 4) Section Connection Unit Displacement Shaft Seal Side Suction Port Side Pressure Port Rear Suction Port 2) Rear Pressure Port 2) S C Section Connection Separate inlets Common inlets 4 Flange A3 89.8x Ø101.6, SAE "B" 4 bolt square A x Ø127, SAE "C" 4 bolt square D7 98.4x Ø50.77 rectangular H Ø82.55 SAE "A" 2 bolt flange H Ø101.6 SAE "B" 2 bolt flange L3 89.8x SAE B 2/4 bolt flange Port Options B1 No ports D3 5) 3/4-16 UNF thread D4 5) 7/8-14 UNF thread D5 5) 1 1/16-12 UN thread D6 5) * 1 5/16-12 UN thread D7 5) * 1 5/8-12 UN thread D8 5) * 1 7/8-12 UN thread E3 1/2-14 BSP thread E4 5/8-14 BSP thread E5 3/4-16 BSP thread E6* 1-11 BSP thread E7* 1 1/4-11 BSP thread E8* 1 1/2-11 BSP thread J5* 15 mm - Ø35 mm - M6 square J7* 20 mm - Ø40 mm - M6 square J8* 18 mm - Ø55 mm - M8 square J9* 26 mm - Ø55 mm - M8 square L1* 13 mm-ø30 mm-m6 diamond L2* 19 mm-ø40 mm-m8 diamond L3* 27 mm-ø51 mm-m10 diamond Port Options S2 5) * 3/4"-3/8-16 UNC SAE Split Flange S3 5) * 1"-3/8-16 UNC SAE Split Flange S4 5) * 1 1/4"-7/16-14 UNC SAE Split Flange S5 5) * 1 1/2"-1/2-13 UNC SAE Split Flange S6 5) * 2"-1/2-13 UNC SAE Split Flange T2* 19.0 mm - M10 Metric Split Flange T3* 25.4 mm - M10 Metric Split Flange T4* 31.8 mm - M10 Metric Split Flange T5* 38.1 mm - M12 Metric Split Flange T6* 50.8 mm - M12 Metric Split Flange 5) Non standard, on request only *) Not usable for rear ports 4) For further "B" triple unit repeat displacement, shaft seal between sections, side suction port, side pressure port, rear suction port, rear pressure port Parker Hannifin Corporation

6 Ordering Series PGP 640 PG 640 P Type Pump Gear design Type Unit Displacement Rotation Shaft Flange Shaft seal Side Suction Port Side Pressure Port Rear Suction Port 2) Rear Pressure Port 2) A B Unit Pump Single unit Multiple unit Displacement ccm * *) Non standard, on request only C A B Rotation Clockwise Counter clockwise Bi-directional X N V T Shaft Seal No seal NBR FPM PTFE (motors only) D1 E1 E4 N1 Shaft 13T, 16/32DP, 41.2L, SAE B spline 15T, 16/32DP, 46.0L, SAE B-B spline 14T, 12/24DP, 55.6L, SAE C spline 1 1/4" Keyed SAE-C Flange A3 89.8x Ø101.06, SAE "B" 4 bolt square flange A x Ø127, SAE "C" 4 bolt square flange H Ø SAE "B" 2 bolt flange K Ø127 SAE C 2 bolt flange Not all variances of ordering codes can be offered. Please check available part numbers first. For not yet implemented part numbers or special requests please contact Parker Hannifin. 2) Only coded for the last section Parker Hannifin Corporation

7 Ordering code Series PGP 640 B 1 B ) No rear ports (rear ports on request) Section Connection Unit Displacement Shaft Seal Side Suction Port Side Pressure Port Rear Rear Pressure Port 2) Suction Port 2) S C Section Connection Separate inlets Common inlets 4 Port Options B1 No ports D5 5) 1 1/16-12 UN thread D6 5) * 1 5/16-12 UN thread D7 5) * 1 5/8-12 UN thread D8 5) * 1 7/8-12 UN thread E4 5/8-14 BSP thread E5 3/4-16 BSP thread E6* 1-11 BSP thread E7* 1 1/4-11 BSP thread E8* 1 1/2-11 BSP thread J8* 18 mm - Ø55 mm - M8 square J9* 26 mm - Ø55 mm - M8 square L2* 19 mm-ø40 mm-m8 diamond L3* 27 mm-ø51 mm-m10 diamond Port Options S2 5) * 3/4"-3/8-16 UNC SAE Split Flange S3 5) * 1"-3/8-16 UNC SAE Split Flange S4 5) * 1 1/4"-7/16-14 UNC SAE Split Flange S5 5) * 1 1/2"-1/2-13 UNC SAE Split Flange S6 5) * 2"-1/2-13 UNC SAE Split Flange T2* 19.0 mm - M10 Metric Split Flange T3* 25.4 mm - M10 Metric Split Flange T4* 31.8 mm - M10 Metric Split Flange T5* 38.1 mm - M12 Metric Split Flange T6* 50.8 mm - M12 Metric Split Flange 5) Non standard, on request only *) Not usable for rear ports 4) For further "B" triple unit repeat displacement, shaft seal between sections, side suction port, side pressure port, rear suction port, rear pressure port Parker Hannifin Corporation

8 Performance data PGP CC Series PGP 620 PGP CC PGP CC PGP CC Fluid Temperature = 45± 2 C Viscosity = 36 mm 2 /s Inlet Pressure = bar absolute Parker Hannifin Corporation

9 Performance Curves PGP CC Input Power [kw] Flow [l/min.] Flow at n=3000 rpm I. Power at n=3000 rpm Flow at n=1500 rpm I. Power at n=1500 rpm 20 Flow at n=500 rpm 10 I. Power at n=500 rpm Pressure [bar] Series PGP 640 PGP CC Input Power [kw] Flow [l/min.] Flow at n=3000 rpm I. Power at n=3000 rpm Flow at n=1500 rpm I. Power at n=1500 rpm Flow at n=500 rpm 5 10 I. Power at n=500 rpm Pressure [bar] 4 PGP CC Input Power [kw] Flow [l/min.] Flow at n=3000 rpm PGP CC Input Power [kw] Flow [l/min.] 260 Flow at n=3000 rpm I. Power at n=3000 rpm I. Power at n=3000 rpm Flow at n=1500 rpm Flow at n=1500 rpm I. Power at n=1500 rpm Flow at n=500 rpm I. Power at n=1500 rpm Flow at n=500 rpm I. Power at n=500 rpm Pressure [bar] I. Power at n=500 rpm Pressure [bar] Fluid temperature: 45 C± 2K ; Viscosity: 36 mm 2 /s ; Inlet pressure: bar absolute Parker Hannifin Corporation

10 Technical Data / Dimensions Series PGP 620 PGP 620 Specification - Standard Displacements - Single Unit Pump Displacement cm³/rev Max. Continuous Press. PGP 620 bar Max. Continuous Press. PGP 625 bar 280* 280* 260* 230* Minimum Max. outlet press. rpm Maximum 0 Inlet & Max. outlet press. rpm Dimension "X" mm Dimension "Y" mm Approx. Weight kg * For higher continuous pressure please use PGP 625 which is with same envelop and dimension as PGP 620 but available with 36, 41, 45 and 50 cc/rev only. 134 across body Dim N Y ±0.5 Dim N X ± max max Dimension Flanges see pages 12 to 13 Dimension Shafts see pages 16 to Parker Hannifin Corporation

11 Technical Data / Dimensions Series PGP, 620 PGP 620 Specification - Standard Displacements - Tandem Unit Pump Displacement cm³/rev Dimension "X" mm Dimension "Y1 " mm Dimension "Y2" max. mm Approximate Weight kg (front section) Approx. Weight kg (rear section) Dimension Flanges see pages 12 to 13 Dimension Shafts see pages 16 to across body Dim N Y1 Dim N Y2 max. Dim N X ± ± max max Parker Hannifin Corporation

12 Mounting flange options Series PGP 620 PGP 620 Mounting Flange 118 A A Ø Ø D Ø Ø Ø Ø Parker Hannifin Corporation

13 Mounting flange options Series PGP, 620 PGP 620 Mounting Flange H2 132 max Ø Ø H max Ø Ø L max Ø Ø holes Parker Hannifin Corporation

14 Port options Series PGP 620 PGP 620 Porting L 4-Bolt flange G2 J European flange G2 T ØD ØB ØB T2 ØD PGP 620 G2 B D C W T2 Thread Dimensions J5 M J7 M J8 M J9 M L1 M L2 M L3 M S2 3/8-16 UNC S3 3/8-16 UNC S4 7/16-14 UNC S5 1/2-13 UNC S6 1/2-13 UNC T2 M T3 M T4 M T5 M T6 M S SAE split flange T SAE split flange metric thread G2 W T2 ØB C Parker Hannifin Corporation

15 Port options Series PGP, 620 PGP 620 Porting D SAE straight thread E BSP - thread G1 G1 T1 T1 4 PGP 620 G1 T1 Thread Dimensions D3 3/4-16 UNF 14.3 D4 7/8-14 UNF 16.7 D5 1 1/16-12 UN 19.0 D6 1 5/16-12 UN 19.0 D7 1 5/8-12 UN 19.0 D8 1 7/8-12 UN 19.0 E3 1/2-14 BSP 14.0 E4 5/8-14 BSP 16.3 E5 3/4-16 BSP 16.0 E BSP 18.0 E7 1 1/4-11 BSP 20.0 E8 1 1/2-11 BSP Parker Hannifin Corporation

16 Drive shaft options Series PGP 620 PGP 620 Drive Shaft D1 E1 Spline SAE B 13T - 16/32 DP Flat root side fit Spline SAE B - B 15T - 16/32 DP Flat root side fit Ø 25.4 Ø 18.3 Ø 25.4 Ø M3 Square key 6.3x6.3x Ø 27 Ø M8x Ø Circlip of Parker Hannifin Corporation

17 Drive shaft options Series PGP, 620 PGP 620 Drive Shaft T1 Woodruff key 4x7.5 DIN Spring washer Nut M14x (11.2) Taper 1:8 Ø 25.4 Ø M14x1.5 Tightening torque 50 ± 10 Nm 4 47 T2 Woodruff key 5x7.5 DIN Spring washer Nut DIN 934 M16x (11) Ø 25.4 M16x1.5 Tightening torque 75 ± 10 Nm Taper 1:5 Ø PGP 620- Shaft Load Capacity Description Torque Rating [Nm] D1 13T, 16/32 DP, 41.2L, SAE B spline 272 E1 15T, 16/32 DP, 46L, SAE B-B spline 460 M3 Ø25.4, 6.3 KEY, M8, 46L, SAE B-B parallel 325 T1 Ø21.59, 11.2L, 4.0 KEY, M14x1.5 taper 1:8 218 T2 Ø25.0, 12.0 L, 5.0 KEY, M16x1.5 taper 1:5 350 Multiple pump connection shaft 228 Torque [Nm] = Displacement [cm3 /rev] x Pressure [bar] Parker Hannifin Corporation

18 Technical Data / Dimensions Series PGP 640 PGP 640 Specification - Standard Displacements - Single Unit Pump Displ cm³/rev 30,0 35,0 40,0 45,0 50,0 55,0 60,0 65,0 70,0 75,0 80,0 90,0 100,0 Max. Continuous Pressure bar Minimum Speed at max. outlet pressure Maximum Speed at = inlet & max. Outlet pressure rpm rpm Dimension "X" mm 128,6 128,6 131,8 131,8 135,6 135,6 138,4 138,4 142,2 142,2 142,2 149,8 149,8 Dimension "Y" mm 176,1 176,1 182,7 182,7 189,3 189,3 195,8 195,8 203,2 203,2 203,2 216,4 216,4 Aprox. Weight Kg 20,6 20,6 21,2 21,2 22,0 22,0 22,6 22,6 23,3 23,3 25,0 25,5 25,5 Dimension Flanges see pages 21 to 22 Dimension Shafts see page 25 DIM. "X" DIM. "Y" across body Parker Hannifin Corporation

19 Dimensions Series PGP 640 PGP 640 Specification - Standard Displacements - Tandem Unit Pump Displ cm³/rev 30,0 35,0 40,0 45,0 50,0 55,0 60,0 65,0 70,0 75,0 80,0 90,0 100,0 Dimension "X1" mm 128,6 128,6 131,8 131,8 135,6 135,6 138,4 138,4 142,2 142,2 142,2 149,8 149,8 Dimension "Y1" mm 176,1 176,1 182,7 182,7 189,3 189,3 195,8 195,8 203,2 203,2 203,2 216,4 216,4 Dimension "X2" mm 44,3 44,3 47,8 47,8 50,5 50,5 54,3 54,3 57,8 57,8 57,8 63,4 63,4 Dimension "Y2" mm 147,5 147,5 154,1 154,1 160,7 160,7 167,2 167,2 174,6 174,6 174,6 184,2 184,2 Aprox. Weight front section Aprox. Weight rear section Kg 20,6 20,6 21,2 21,2 22,0 22,0 22,6 22,6 23,3 23,3 25,0 25,5 25,5 Kg 20,1 20,1 20,7 20,7 21,5 21,5 22,1 22,1 22,8 22,8 24,5 25,0 25,0 Dimension Flanges see pages 21 to 22 Dimension Shafts see page 25 4 DIM. "X1" DIM. "Y1" DIM. "Y2" DIM. "X2" across body Parker Hannifin Corporation

20 Dimensions Series PGP 640 / 620 PGP 640/620 Specification - Standard Displacements - Tandem Unit Pump Displ cm³/rev 30,0 35,0 40,0 45,0 50,0 55,0 60,0 65,0 70,0 75,0 80,0 90,0 100,0 Dimension "X1" mm 128,6 128,6 131,8 131,8 135,6 135,6 138,4 138,4 142,2 142,2 142,2 149,8 149,8 Dimension "Y1" mm 176,1 176,1 182,7 182,7 189,3 189,3 195,8 195,8 203,2 203,2 203,2 216,4 216,4 Pump Displ cm³/rev 16,0 19,0 21,0 23,0 26,0 29,0 33,0 36,0 37,0 41,0 44,0 50,0 52,0 Dimension "Y2" mm 115,2 118,5 120,7 122,9 126,2 129,5 133,9 137,2 138,3 142, ,6 154,8 Aprox. Weight front section Aprox. Weight rear section Kg 20,6 20,6 21,2 21,2 22,0 22,0 22,6 22,6 23,3 23,3 25,0 25,5 25,5 Kg 10,4 10,5 10,5 10,6 10, ,1 11,2 11,3 11,4 11,5 11,7 11,8 Dimension Flanges see pages 21 to 22 Dimension Shafts see page 25 DIM. "Y1" DIM. "Y2" DIM. "X" across body Parker Hannifin Corporation

21 Mounting flange options Series PGP 640 PGP 640 Mounting Flange A A Ø Ø Ø slots Ø Ø Ø Parker Hannifin Corporation

22 Mounting flange options Series PGP 640 PGP 640 Mounting Flange H Ø14.1 Ø K Ø Ø Parker Hannifin Corporation

23 Port options Series PGP 640 PGP 640 Porting L 4-Bolt flange G2 J European flange G2 T ØD ØB S SAE split flange G2 W T2 ØB C T2 ØD ØB PGP 640 G2 B D C W T2 Thread Dimensions J8 M J9 M L2 M L3 M S2 3/8-16 UNC S3 3/8-16 UNC S4 7/16-14 UNC S5 1/2-13 UNC S6 1/2-13 UNC T2 M T3 M T4 M T5 M T6 M T SAE split flange metric thread Parker Hannifin Corporation

24 Port options Series PGP 640 PGP 640 Porting D SAE straight thread E BSP - thread G1 G1 T1 T1 PGP 640 G1 T1 Thread Dimensions D5 1 1/16-12 UN 19.0 D6 1 5/16-12 UN 19.0 D7 1 5/8-12 UN 19.0 D8 1 7/8-12 UN 19.0 E4 5/8-14 BSP 16.3 E5 3/4-16 BSP 16.0 E BSP 18.0 E7 1 1/4-11 BSP 20.0 E8 1 1/2-11 BSP Parker Hannifin Corporation

25 Drive shaft options Series PGP 640 PGP 640 Drive Shaft D1 E Full spline Ø SAE involute spline 13 teeth - 16/32 pitch flat root side fit major dia minor dia max. 46 Chamfer 1.5 x 45 SAE involute spline 15 teeth - 16/32 pitch flat root side fit major dia minor dia max. 4 E4 N Full spline SAE involute spline 14 teeth - 12/24 pitch flat root side fit major dia minor dia max. Square key 7.9 x 7.9 x Ø Parker Hannifin Corporation

26 Shaft Loads / Fluids / Seal Kits Heavy-duty Pumps and Motors Series PGP 600 Shaft loads PGP 600 Description Type Torque rating 620 [Nm] Torque rating 640 [Nm] D1 13T, 16/32 DP, 41.2L, SAE "B" splined E1 15T, 16/32 DP, 46.0L, SAE "B-B" splined E4 14T, 12/24 DP, 55.6L, SAE C splined 960 M3 Ø25.4, 6.3 KEY, M8, 46L, SAE B-B parallel 325 T1 Ø21.59, 11.2L, 4.0key, M14x1.5 tapered 1:8 218 T2 Ø25.0, 12.0L, 5.0 KEY, M16x1.5 taper 1:5 301 N1 1 1/4" SAE-C keyed 678 connecting shaft Formula to calculate shaft load Hydraulic fluids Type Fluid composition Max. working pressure [bar] Max. speed [min-1] Temperature Seal Hydraulic fluid Mineral oil based on C NBR See table drawings See table drawings hydraulic fluid acc. to ISO/DIN C FPM HFB Water-in-oil emulsion 40/ C NBR HFC Water-glycol 40/ C NBR HFD Phosphate ester C FPM Flanges for suction and discharge ports Please refer to Parker Bulletin 4040/UK. Standard Seal Kits for pumps 600 SERIES 600 Pump Series TDN PGP620 Single N Tandem rear Tandem 4070H Tandem (FPM) Single (FPM) V Triple Pump PGP620...T2K PGP620/PGP511 Tandem N PGP620/PGP511 Tandem (FPM) V PGP620/ Triple (sealed) PGP511/511 PGP620/620/ Triple (FPM) PGP511 PGP640 Single PGP640 Single FPM PGP640 Tandem (M) PGP640/PGP511 Tandem (M) PGP640/620/620 Triple Pump Parker Hannifin Corporation

27 List of available pump combinations Heavy-duty Pumps and Motors Series PGP 600 Reading Direction First pump Second pump PGP 502 PGP 505 PGP 511 PGP 517 PGP 620 PGP 640 PGP 502 X PGP 505 X PGP 511 X X PGP 517 X X PGP 620 X X PGP 640 X X X Nomograph for Pipe Velocity Flow Q [l/min] Inside Pipe Diameter [mm] d Q [l/min] d [mm] = 6 v [m/s] Maximum recommended velocity for Inlet Tank Return Outlet HFB, HFC Oil HFB, HFC Oil FlowVelocity v [m/s] Parker Hannifin Corporation

28 Valve options Valve Applications for Pumps Series PGP 600 Pressure relief valve / adjustable internal vent Introduction: Parker`s valve program was developed in response to requests from OEM customers to reduce the number and total cost of components on their machines. We addressed this challenge by integrating the valves required for machine functions into our hydraulic pumps and motors. This integration has reduced the number of purchased components, eliminated many of the hydraulic hoses and associated fittings (and potential leak points), and reduced assembly labor cost on the production line. PGP 620 CODE Pressure bar RDPA 10 RDPB 20 RDPC 30 RDPD 40 RDPE 50 RDPF 60 RDPG 70 RDPH 80 RDPJ 90 RDPK 100 RDPL 110 RDPM 120 RDPN 130 RDPP 140 RDPQ 150 RDPR 160 RDPS 170 RDPT 180 RDPU 190 RDPV 200 RDPW 210 RDPX 220 RDPY 230 RDPZ Parker Hannifin Corporation

29 Valve options / Ordering code Valve Applications for Pumps Series PGP 600 Priority Flow Divider 1VP- / CVP100- Port Configuration Port Orientation Function Priority Port Excess Port Priority Flow R/V Setting Port Configuration Priority Port R/V Setting A End Priority, End Excess J1 3/4-16UNF 00 No Relief Valve B Side Priority, Side Excess J8 9/16-18UNF A05 Adjustable bar C End Priority, Side Excess T1 3/8 BSP A15 Adjustable bar D E Side Priority, End Excess Double Side Ported other on request bar bar bar A B A B C Port Orientation Priority Port on Pump Inlet Side Priority Port on Pump Outlet Side Function Priority Flow Divider PFD with Full Flow R/V PFD with Pilot R/V Excess Port J2 7/8-14UNF J3 1-1/16-12UN T2 1/2 BSP T4 3/4 BSP other on request bar bar bar bar bar bar bar bar bar 4 other on request P EF Priority Flow Divider Function A Priority Flow 08 8 lpm lpm lpm lpm lpm lpm lpm other on request P EF P EF Priority Flow Divider With Full Flow R/V Function B Priority Flow Divider With Pilot R/V Function C Parker Hannifin Corporation

30 Valve options Valve Applications for Pumps Series PGP 600 Priority Flow Divider Comments: The Priority Flow Divider provides a constant and specified flow for power steering or other priority functions. The balance of flow produced by the pump is available from the EF port for additional functions such as open center directional control valves, fan drives, etc. It can also be fitted with a pressure relief valve Variations for PGP620/ 640 without priority relief valve (Function A ) with full flow priority relief valve (Function B ) with pilot priority relief valve (Function C ) Pressure Range P-port Maximum EF-port Maximum 230 bar 250 bar Maximum Flows for PGP620/640 P-port EF-port max. input flow 45 lpm 100 lpm 100 lpm Port Configuration A Port Orientation B Parker Hannifin Corporation

31 Valve options Valve Applications for Pumps Series PGP 600 Side Mounted Priority Flow Divider (Load Sense or Fixed Flow) Comments: Piority Flow Dividers can also be direct mounted to the pressure port to provide a constant and specified flow for power steering or other priority functions. Variations for PGP620 / 640 without priority relief valve (Function A ) with full flow priority relief valve (Function B ) with pilot priority relief valve (Function C ) Note: relief valve in the steering unit is required. control pressure settings and priority flow settings on request for 620/640 P-port Maximum Pressure Range 250 bar P EF 4 EF-port Maximum 310 bar Priority Flow Divider Function A for 620/640 P-port max. input flow Maximum Flows 45 lpm 160 lpm LS P EF Load Sensing Priority Valve with Dynamic Load Sensing Signal Function F Port Configuration E Port Orientation A Parker Hannifin Corporation

32 Valve options / Ordering code Valve Applications for Pumps Series PGP 600 Load Sensing Priority Valve 1VP- / CVP100- Port Configuration Port Orientation Function Priority Port Excess Port LS Port R/V Setting Control Setting LS A B C D E A B D E F G Port Configuration End Priority, End Excess Side Priority, Side Excess End Priority, Side Excess Side Priority, End Excess Double Side Ported Port Orientation Priority Port on Pump Inlet Side Priority Port on Pump Outlet Side Function LSPV, Static LS LSPV, Static LS with Pilot R/V LSPV, Dynamic LS LSPV, Dynamic LS with Pilot R/V LS P EF Load Sensing Priority Valve with Dynamic Load Sensing Signal Function F LS P EF Priority Port J1 3/4-16UNF J8 9/16-18UNF T1 3/8 BSP other on request Excess Port J2 7/8-14UNF J3 1-1/16-12UN T2 1/2 BSP T4 3/4 BSP other on request LS Port X2 7/16-20UNF female Y1 1/4 BSP male Y3 1/4 BSP BX2 7/16-20UNF Body Port other on request Control Setting LS bar static bar dynamic bar dynamic bar static bar static / dynamic bar dynamic bar static bar dynamic bar dynamic bar dynamic bar dynamic other on request R/V Setting 00 No Relief Valve A05 Adjustable bar A15 Adjustable bar bar bar bar bar bar bar bar bar bar bar bar bar other on request Load Sensing Priority Valve with Dynamic Load Sensing Signal Function G Parker Hannifin Corporation

33 Valve options Valve Applications for Pumps Series PGP 600 Load Sensing Priority Valve Comments: The Load sense Priority Valve provides priority flow on demand, typically for LS power steering: The balance of the flow produced by the pump is available from the EF port for additional functions such as open center directional control valves, fan drives, etc. When the power steering is idle, full pump flow is available for these functions The selection of pilot relief and static or dynamic signal is dependent on the characteristics of the selected steering unit. Variations for PGP 620 / 640 without pilot relief, dynamic LS signal (Function G ) / with pilot relief, dynamic LS signal (Function F ) without pilot relief, static LS signal / with pilot relief, static LS signal P-port Maximum EF-port Maximum Pressure Range 230 bar equal to max. rating of pump 4 for PG 620/640 P-port EF-port max. input flow Maximum Flows 45 lpm 100 lpm 100 lpm Port Confiiguration E Port Orientation A Parker Hannifin Corporation

34