High-Pressure Fixed Displacement Radial Piston Pumps PR Series

Transcription

1 HYDRULIC COMONENTS HYDROSTTIC TRNSMISSIONS GERBOXES - CCESSORIES Certified Company ISO ISO 9001 Via M. L. King, MODEN (ITLY) Tel: Fax: / INTERNET: E-MIL: hansatmp@hansatmp.it High- Fixed Displacement

2

3 CONTENTS General Information... roduct Overview... Single umps R R R R 5 - R R 10 - R Tandem umps General Information R 1 - R 2 + Gr 1 Gear ump R 1 - R 2 - R 3 + Gr 2 Gear ump R 1 - R 2 - R 3 + Gr 3 Gear ump R 5 - R 7 + Gr 2 Gear ump R 5 - R 7 + Gr 3 Gear ump R 10 - R 14 + Gr 2 Gear ump R 10 - R 14 + Gr 3 Gear ump Installation Instructions Order Code ag. 3

4 GENERL INFORMTION stage high-low pressure pump is required. suction and pressing reciprocating motion. rates. with gear pumps. pressure pumps coupled with gear pumps or vane pumps. Flow pulsation diagram H L H ag. 4

5 RODUCT OVERVIEW ag. 5

6 R TECHNICL SECIFICTIONS Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Flow Direction: from Suction port to port even at inverse rotation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: H ag. 6

7 R TECHNICL SECIFICTIONS pplication characteristics / ower diagram (at rated speed n/min.) ag. 7

8 R 1...S - INSTLLTION DRWINGS Version for oil-submersed installation Overall dimensions Shaft detail HOLLOW SHFT F See shaft detail ort RLLEL SHFT M SLINED SHFT X H ag. 8

9 R INSTLLTION DRWINGS Version with cover for external installation with axial suction port Overall dimensions and shaft detail Ø ort Suction ort Ø Ø ag. 9

10 R TECHNICL SECIFICTIONS Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Flow Direction: from Suction port to port even at inverse rotation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: H ag. 10

11 R TECHNICL SECIFICTIONS pplication characteristics / ower diagram (at rated speed n/min.) ag. 11

12 R 2...S - INSTLLTION DRWINGS Version for oil-submersed installation Overall dimensions Shaft detail HOLLOW SHFT F See shaft detail - ort RLLEL SHFT M SLINED SHFT X H ag. 12

13 R INSTLLTION DRWINGS Version with cover for external installation with axial suction port Overall dimensions Ø and shaft detail Suction ort Ø Ø ort ag. 13

14 R TECHNICL SECIFICTIONS Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Flow Direction: from Suction port to port even at inverse rotation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: H ag. 14

15 R TECHNICL SECIFICTIONS pplication characteristics / ower diagram (at rated speed n/min.) ag. 15

16 R 3...S - INSTLLTION DRWINGS Version for oil-submersed installation Overall dimensions Shaft detail HOLLOW SHFT F See shaft detail - ports RLLEL SHFT M SLINED SHFT X H ag. 16

17 R INSTLLTION DRWINGS Version with cover for external installation with axial suction port Overall dimensions and shaft detail ort o Suction ort Ø Ø ag. 17

18 R 5... R TECHNICL SECIFICTIONS R 5... pplication characteristics R7... pplication characteristics Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Flow Direction: from Suction port to port even at inverse rotation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: ag. 18

19 R 5... R INSTLLTION DRWINGS Overall dimensions Shaft detail and shaft detail SLINED SHFT X 1/2 BS 3/8 BS - Suction port - port 4xM8 RLLEL SHFT M 24 H ag. 19

20 R R TECHNICL SECIFICTIONS R pplication characteristics R pplication characteristics Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Flow Direction: from Suction port to port even at inverse rotation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: ag. 20

21 R R INSTLLTION DRWING Overall dimensions Shaft detail and shaft detail SLINED SHFT X - Suction port - port RLLEL SHFT M 24 H ag. 21

22 ag. 22

23 TNDEM UM - GENERL INFORMTION L H pressure pumps coupled with gear pumps or vane pumps. lways make sure that the torque applied is less than or equal to the admissible torque of the shaft. ag. 23

24 TNDEM UM R R Gear ump Gr 1 TECHNICL SECIFICTIONS High Characteristics Construction: High ump: Low ump: Gear ump GR 1 Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: (*) ag. 24

25 TNDEM UM R R Gear ump Gr 1 INSTLLTION DRWINGS and shaft detail 4 Ø60 j6 iston ump ort -3/8"BS C B 10,8 Low Gear ump orts Suction 47 Ø74 N 4-M8x12 R R L H Low Gear umps Characteristics Gear ump model Displacement cm 3 / n Flow at rated speed lt/min. Max bar mm. B mm. C mm. Suction ort ort V1-0,9 0,91 1, ,1 37,3 171,1 Type Type B V1-1,2 1,17 1, ,8 172 Type Type B V1-1,7 1,56 2, ,5 38,5 1 73,5 Type Type B V1-2,2 2,08 3, ,5 39,5 1 75,5 Type Type B V1-2,6 2,60 3, ,5 40,5 1 77,5 Type Type B V1-3,2 3,12 4, ,5 41,5 1 79,5 Type Type B V1-3,8 3,64 5, ,5 42,5 1 81,5 Type Type B V1-4,3 4,16 6, ,5 43,5 1 83,5 Type Type B V1-4,9 4,94 7, , ,5 Type Type B V1-5,9 5,85 8, ,8 190 Type Type B V1-6,5 6,50 9, , ,5 Type Type B V1-7,8 7,54 10, , ,5 Type Type B V1-9,8 9,88 14, ,5 54,5 205,5 Type Type B ag. 25

26 TNDEM UM R R R Gear ump Gr 2 TECHNICL SECIFICTIONS High Characteristics Construction: High ump: Low ump: Gear ump GR 2 Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: (*) ag. 26

27 TNDEM UM R R R Gear ump Gr 2 INSTLLTION DRWING - 0,025 f7( - 0,050) Tapered 1:8 Low Gear ump orts Suction Radial ump ort 3/8 BS R 2- R3 R 1 L H Low Gear umps Characteristics Gear ump model Displacement cm 3 / n Flow at rated speed lt/min. Max bar mm. B mm. C mm. Suction ort ort V2-4 4,20 6, ,7 101,4 188,4 Type Type D V2-6 6,00 8, ,2 104,4 191,4 Type Type D V2-9 8,40 12, ,2 108,4 195,4 Type Type D V ,80 15, ,2 112,4 199,4 Type Type D V ,40 20, ,2 118,4 205,4 Type B Type D V ,80 24, ,2 122,4 209,4 Type B Type D V ,20 27, ,2 126,4 213,4 Type B Type D V ,80 33, ,2 132,4 219,4 Type B Type D V ,20 37, ,2 136,4 223,4 Type C Type E V ,00 43, ,2 144,4 231,4 Type C Type E V ,20 49, ,7 151,4 238,4 Type C Type E V ,60 57, ,2 160,4 247,4 Type C Type E ag. 27

28 TNDEM UM R R R Gear ump Gr 3 TECHNICL SECIFICTIONS High Characteristics Construction: High ump: Low ump: Gear ump GR 3 Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: (*) ag. 28

29 TNDEM UM R R R Gear ump Gr 3 INSTLLTION DRWINGS Tapered 1:8 Low Gear ump orts Suction Radial ump ort 3/8 BS R 1 R 2- R3 L H Low Gear umps Characteristics Gear ump model Displacement cm 3 / n Flow at rated speed lt/min. Max bar mm. B mm. C mm. Suction ort ort T ,10 32, Type Type D T ,20 38, , Type Type D T ,10 48, Type B Type D T ,90 54, ,8 162,6 249,9 Type B Type D T ,10 63, Type B Type E T ,30 70, , Type B Type E T ,10 80, Type B Type E T ,40 91, Type C Type E T ,40 107, Type C Type E T ,20 127, Type C Type E ag. 29

30 TNDEM UM R R Gear ump Gr 2 TECHNICL SECIFICTIONS High Characteristics Construction: High ump: Low ump: Gear ump GR 2 Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: (*) ag. 30

31 TNDEM UM R R Gear ump Gr 2 INSTLLTION DRWINGS Tapered Low Gear ump orts Suction 3/8 BS 1/2 BS - H ump Suction port - H ump port L H Low Gear umps Characteristics Gear ump model Displacement cm 3 / n Flow at rated speed lt/min. Max bar mm. B mm. C mm. Suction ort ort V2-4 4,20 6, ,7 101,4 186,9 Type Type D V2-6 6,00 8, ,2 104,4 189,9 Type Type D V2-9 8,40 12, ,2 108,4 193,9 Type Type D V ,80 15, ,2 112,4 197,9 Type Type D V ,40 20, ,2 118,4 203,9 Type B Type D V ,80 24, ,2 122,4 207,9 Type B Type D V ,20 27, ,2 126,4 211,9 Type B Type D V ,80 33, ,2 132,4 217,9 Type B Type D V ,20 37, ,2 136,4 221,9 Type C Type E V ,00 43, ,2 144,4 229,9 Type C Type E V ,20 49, ,7 151,4 236,9 Type C Type E V ,60 57, ,2 160,4 245,9 Type C Type E ag. 31

32 TNDEM UM R R Gear ump Gr 3 TECHNICL SECIFICTIONS High Characteristics Construction: High ump: Low ump: Gear ump GR 3 Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: (*) ag. 32

33 TNDEM UM R R Gear ump Gr 3 INSTLLTION DRWINGS Tapered Low Gear ump orts Suction 3/8 BS 1/2 BS - H ump Suction port - H ump port L H Low Gear umps Characteristics Gear ump model Displacement cm 3 / n Flow at rated speed lt/min. Max bar mm. B mm. C mm. Suction ort ort T ,10 32, ,5 Type Type D T ,20 38, , ,5 Type Type D T ,10 48, ,4 Type B Type D T ,90 54, ,8 162,6 248,1 Type B Type D T ,10 63, ,5 Type B Type E T ,30 70, , ,5 Type B Type E T ,10 80, ,5 Type B Type E T ,40 91, ,5 Type C Type E T ,40 107, ,5 Type C Type E T ,20 127, ,5 Type C Type E ag. 33

34 TNDEM UM R R Gear ump Gr 2 TECHNICL SECIFICTIONS High Characteristics N of istons ump Type Displacement cm 3 / n iston ump Rated bar eak bar Gear ump Gr 2 Displacement cm 3 / n Range bar Rated Speed n/min. Speed Range n/min. (*) R , R , R , R , R , R , Construction: High ump: Low ump: Gear ump GR 2 Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: (*) ag. 34

35 TNDEM UM R R Gear ump Gr 2 INSTLLTION DRWINGS Tapered Low Gear ump orts Suction 3/8 BS 1/2 BS - H ump Suction port - H ump port L H Low Gear umps Characteristics Gear ump model Displacement cm 3 / n Flow at rated speed lt/min. Max bar mm. B mm. C mm. Suction ort ort V2-4 4,20 6, ,7 101,4 244,4 Type Type D V2-6 6,00 8, ,2 104,4 247,4 Type Type D V2-9 8,40 12, ,2 108,4 251,4 Type Type D V ,80 15, ,2 112,4 255,4 Type Type D V ,40 20, ,2 118,4 261,4 Type B Type D V ,80 24, ,2 122,4 265,4 Type B Type D V ,20 27, ,2 126,4 269,4 Type B Type D V ,80 33, ,2 132,4 275,4 Type B Type D V ,20 37, ,2 136,4 279,4 Type C Type E V ,00 43, ,2 144,4 287,4 Type C Type E V ,20 49, ,7 151,4 294,4 Type C Type E V ,60 57, ,2 160,4 303,4 Type C Type E ag. 35

36 TNDEM UM R R Gear ump Gr 3 TECHNICL SECIFICTIONS High Characteristics N of istons ump Type Displacement cm 3 / n iston ump Rated bar eak bar Gear ump Gr 3 Displacement cm 3 / n Range bar Rated Speed n/min. Speed Range n/min. (*) R , R , R , R , R , R , Construction: High ump: Low ump: Gear ump GR 3 Rotation Direction: ssembly osition: to be chosen between the ones which ensure correct suction. Versions: installation. Environmental Temperature: from -20 C to +60 C. Fluid Temperature: Suction : Hydraulic Fluid: Mineral Oil according to DIN Fluid Viscosity: Oil Contamination Level: (*) ag. 36

37 TNDEM UM R R Gear ump Gr 3 INSTLLTION DRWINGS Tapered Low Gear ump orts Suction 3/8 BS 1/2 BS - H ump Suction port - H ump port L H Low Gear umps Characteristics Gear ump model Displacement cm 3 / n Flow at rated speed lt/min. Max bar mm. B mm. C mm. Suction ort ort T ,10 32, Type Type D T ,20 38, , Type Type D T ,10 48, Type B Type D T ,90 54, ,8 162,6 305,6 Type B Type D T ,10 63, Type B Type E T ,30 70, , Type B Type E T ,10 80, Type B Type E T ,40 91, Type C Type E T ,40 107, Type C Type E T ,20 127, Type C Type E ag. 37

38 INSTLLTION INSTRUCTIONS INSTLLTION feeding. minimal level of the oil during the functioning. External Installation Oil-submersed installation STRTING ND USE RECUTION FILTERING We advise ag. 38

39 ORDER CODE R 3 12 M 19 S - V 2-19 ump series R number of pistons: iston diameter: 7-7 mm (only R 1,R2,R3) 8-8 mm. (only R 1,R2,R3) mm mm mm. Shaft : M - Solid parallel keyed shaft for elastic coupling 19 - Shaft diam. 19 mm. (only R 1- R2 - R3) 24 - Shaft diam. 24 mm F - Hollow shaft for direct connection to electric motor (only R 1- R2 - R3) 19 - Shaft diam. 19 mm Shaft diam. 24 mm. X - Splined Shaft DIN 5482 Installation : - Externally, with axial suction port (all models) S -oil submersed, with no piston caps (only R 1 - R 2 - R 3) Multiple pomp option (omit if not required) Gear pump : Gear ump Rear Mounting - Gr 1 (only R 1, R 2) pump displacement (cm 3 /n.) V 1-0,9-0,91 V ,17 V 1-1,7-1,56 V 1-2,2-2,08 V 1-2,6-2,60 V 1-3,2-3,12 V 1-3,8-3,64 V 1-4,3-4,16 V 1-4,9-4,94 V 1-5,9-5,85 V 1-6,5-6,50 V 1-7,8-7,54 V 1-9,8-9,88 Gear ump Front Mounting - Gr 2 pump displacement (cm 3 /n.) V ,20 V ,00 V ,40 V ,80 V ,40 V ,80 V ,20 V ,80 V ,20 V ,00 V ,20 V ,60 Gear ump Front Mounting - Gr 3 pump displacement (cm 3 /n.) T ,10 T ,20 T ,10 T ,90 T ,10 T ,30 T ,10 T ,40 T ,40 T ,20 ag. 39

40

41

42

43

44 s HNS-TM has a very extensive range of products and some products have a situations. If the catalogue does not supply all the information required, please contact HNS-TM. regarding the proposed application. Whilst every reasonable endeavour has been made to ensure accuracy, this publication cannot be considered to represent part of any contract, whether expressed or implied. The data is this catalogue refer to the standard product. The policy of HNS-TM consists of a continuous improvement of its products. It reserves the and without giving prior information. HYDRULIC COMONENTS HYDROSTTIC TRNSMISSIONS GERBOXES - CCESSORIES Via M. L. King, MODEN (ITLY) Tel: Fax: / INTERNET: E-MIL: hansatmp@hansatmp.it