XPR10A. BendPakSKU

Transcription

1 Ser vi cemanual S er vi cepar t s& Di agr ams T hi sgui dei sat r oubl es hoot i ngr ef er enceus edf ormai nt ai ni ngands er vi ci ngyour BendPakpr oduct.i tpr ovi descompr ehens i vei nf or mat i ononi dent i f yi ngs er vi ceabl e par t sandcomponent sandas s i s t si nt r oubl es hoot i ngpr obl emsandper f or mi ng as s embl y/ di s as s embl ypr ocedur es. XPR10 HD9XW BendPakSKU HD9XW F our Pos tcarl i f t Ver s i onl 06/ 06/ 2016

2 REV C D E REVISION DESCRIPTIO N DDED , , , , , ND , UPDTED BOM REVISIONS REMOVED , DDED UPDTED BOM REVISIONS REPLCED WITH , UPDTED BOM REVISIONS DTE E DITED BY ECO# 08/13/ /25/2015 JM /30/2015 JM NOTE: UNLESS OTHERWISE SPECIFIED SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING LL LBELS TO BE PPLIED TO POSTS FTER PINTING. SEE TTCHED LBEL PLCEMENT SHEET ITEM NO. PRT NUMBER D ESCRIPTIO N QTY. REV HD-9XW LIFT SUPERSTRUCTUR E 1 E PRTS BOX HD-9XW 1 E WRNING LI/WL POST DECL KIT, LESS LI 1 B MNUFCTURER LBEL MX CP DNGER PRODUCT DT LBEL SERIL NUMBER INTERIOR TG PLTE 1 -- DO NOT SCLE DRWING NME DTE D RWN 08/12/ LEMONWOOD DR. SNT PUL, C CHECKED - - DIMENSIONS RE IN MM THIRD NGLE PROJECTION TITLE: HD-9XW PRODUCTION LIFT VER L (CE CERT) SIZE DWG. NO. REV PROPRIETRY ND CONFIDENTI L THE INFORMTION CONTINED IN THIS DRWING IS E T HE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT T HE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. SCLE: 1:50 SHEET 1 OF 2

3 OR LEMONWOOD DR. SNT PUL, C TITLE: HD-9XW PRODUCTION LIFT VER L (CE CERT) SIZE DWG. NO REV E S SHEET 2 OF 2 CLE: 1:35

4 REVISION REV DESCRIPTION DTE EDITED BY ECO# C DELETED M6 GRESE FITTINGS, DDED (20) /22/2009 C D DDED HD-9 SERIES TO TITLE 02/19/2010 C D-001 D-002 UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLY 06/06/ /24/ D-003 UPDTED NEXT SSEMBLIES 11/20/ E REPLCED WITH , WITH , UPDTED NEXT SSEMBLIES 10/29/ DETIL B SCLE 1 : DETIL C SCLE 1 : DETIL SCLE 1 : 4 2 DETIL D SCLE 1 : 8 NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING DETIL E SCLE 1 : 4 NEXT SSEMBLY ITEM NO. PRT NUMBER DESCRIPTION QTY. REV ROTOR CLIP 12mm SS HHB M6 x 1 x NUT M6 x 1.0 NL NUT M8 x 1.25 NL WSHER M8 x24 FLT HHB M8 x 1.25 x 25 4 B HHB M12 x 1.75 x 90 CL WSHER, M12 SPRING LOCK WSHER, M12 FLT WSHER NUT M12 x FTG TEE -04 COMP x -04 COMP x -04 COMP FTG ELB -04 COMP x -06 NPT FTG ELB -04 JIC-06 NPT FTG ELB -04 JIC -06L ORB WSHER, Ø4.3 x Ø9mm x 0.8mm SHCS M4 x 0.7mm x 12mm Nut, M4 X C WSHER SHIM FOR LIFTS 20 - DO NOT SCLE DRWING NME DTE SIZE: DIMENSIONS RE IN MM MTERIL: DRWN C 08/08/2008 CHECKED THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: SIZE DWG. NO LEMONWOOD DR. SNT PUL, C HD-7/9 SERIES PRTS BG SCLE: 1:30 REV E SHEET 1 OF 1

5 REV REVISION DESCRIPTION DTE EDITED BY ECO# D D-001 D-010 UPDTED NEXT SSEMBLY, DDED UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLIES 02/24/ /21/ /24/2013 C E REPLCED WITH /29/ F REPLCED WITH , UPDTED NEXT SSEMBLIES 05/05/2015 MR NOTE: UNLESS OTHERWISE SPECIFIED. 1. SSEMBLE ITEMS S SHOWN 7 NEXT SSEMBLY HD/HDS/HDSO SERIES ITEM NO PRT NUMBER DESCRIPTION QTY REV ZERO NGLE MTG BRCKET 1 C PUSH BUTTON IR VLVE 1 B SHCS M3 x 0.5 x WSHER M3 x 9mm NUT M3 x 0.5 NL FTG ELB -04 COMP x -02 NPT FTG NPL -02 NPT x -04 F NPT 1 - DO NOT SCLE DRWING NME DTE DRWN C 3/14/ LEMONWOOD DR. SNT PUL, C CHECKED C 09/02/2015 THIRD NGLE PROJECTION DIMENSIONS RE IN MM TITLE: PUSH BUTTON IR SSEMBLY SIZE DWG. NO. REV PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS F THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. SCLE: 2:3 SHEET 1 OF 1

6 REVISION REV DESCRIPTION DTE EDITED BY ECO# B UPDTED BOM REVISIONS, UPDTED NEXT SSEMBLY 11/14/2008 C C UPDTED BOM REVISION 04/22/ D D-001 D-002 UPDTED TITLE TO REFLECT WHERE USED, UPDTED BOM REVISIONS UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLY 06/10/ /20/ /06/2011 C NOTE: UNLESS OTHERWISE SPECIFIED. 1. SSEMBLE ITEMS S SHOWN NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY REV HD-7500/9 SERIES CYLINDER FLNGE RM WELDMENT 1 D CYL. FLNGE RM SLIDE FHS M6 x 1.0 x NUT M6 x 1.0 NL M6 FLT WSHER 4 - SIZE: DO NOT SCLE DRWING DIMENSIONS RE IN MM MTERIL: DRWN NME C DTE 08/21/2008 CHECKED MT 07/06/2011 THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: SIZE DWG. NO LEMONWOOD DR. SNT PUL, C HD-7500/9 CYLINDER FLNGE RM SSEMBLY SCLE: 1:3 REV D SHEET 1 OF 1

7 REVISION REV DESCRIPTION DTE EDITED BY ECO# R REMOVED , , /14/2015 MR T UPDTED BOM REVISION 04/28/2015 MR U REMOVED (4) /25/2015 JM DETIL SCLE 1 : 10 3 DETIL B SCLE 1 : 10 NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. SSEMBLE ITEMS S SHOWN 5 B NEXT SSEMBLY ITEM NO PRT NUMBER DIMENSIONS RE IN MM DESCRIPTION QTY REV HD-7500BLX/9STX/ 9SWX/9XL/9XW POWER SIDE WELDMENT 1 J CYLINDER SSEMBLY Ø3.0 x 82 1 G CBLE RETINER PLTE HD-7/7500/9 SERIES SINGLE SHEVE ROLLER SSEMBLY 2 D HD-7/7500/9 SERIES TWIN SHEVE SSEMBLY 2 D HD-7/7500/9 SERIES RMP SHEVE SHFT WELDMENT 4 D HD-7500/9 CYLINDER FLNGE RM SSEMBLY 1 D SHCS M8x1.25x20mm L 4 - DO NOT SCLE DRWING DRWN NME C DTE 10/15/2008 CHECKED C 09/01/2015 THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: SIZE DWG. NO LEMONWOOD DR. SNT PUL, C HD-7500BLX/9STX/9SWX/9XW POWER SIDE RMP SSEMBLY SCLE: 1:25 REV U SHEET 1 OF 2

8 1645 LEMONWOOD DR. SNT PUL, C TITLE: HD-7500BLX/9STX/9SWX/9XW POWER SIDE RMP SSEMBLY SIZE DWG. NO SCLE: 1:10 REV U SHEET 2 OF 2

9 REVISION REV DESCRIPTION DTE EDITED BY ECO# C UPDTED TITLE TO REFLECT WHERE USED UPDTED NEXT SSEMBLY 02/25/2010 C D UPDTED TITLE TO REFLECT WHERE USED 06/10/2010 C UPDTED BOM REVISIONS REPLCED WITH D-001 D-002 E UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLIES UPDTED BOM REVISION 06/06/ /27/ /22/ E-001 E-002 E-003 E-004 E-005 UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLIES 11/19/ /20/ /20/ /10/ /14/ NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. SSEMBLE ITEMS S SHOWN NEXT SSEMBLY ITEM NO NUMBER PRT DESCRIPTION QTY REV HD-7500BL/7500BLX/ 9/9N/9NX/9ST/9STX/9XW DRIVE UP RMP WELDMENT 1 D HD-7500/9, HD/S-14 SERIES DRIVE UP RMP PLSTIC ROLLER 2 F HHB M6 x 1 x NUT M6 x 1.0 NL 2 - DO NOT SCLE DRWING NME DTE DRWN C 11/13/ LEMONWOOD DR. SNT PUL, C DIMENSIONS RE IN MM CHECKED THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: HD-7500BL/BLX, 9/ST/STX/XW DRIVE UP RMP SSEMBLY SIZE DWG. NO SCLE: 1:8 REV F SHEET 1 OF 1

10 REVISION REV DESCRIPTION DTE EDITED BY ECO# E REPLCED WITH /19/2015 MR F REMOVED (2) ND (2) /25/2015 JM G UPDTED BOM REVISIONS 12/30/2015 JM DETIL SCLE 1 : 8 NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. SSEMBLE ITEMS S SHOWN NEXT SSEMBLY ITEM NO NUMBER DESCRIPTION QTY REV HD-9/9XW CROSSTUBE WELDMENT, SMLL WINDOW 1 E HD/HDS-7/7500/9/14, HDSO-14 SFETY PIN 2 E HD-7/7500/9/14/HDSO-14 PLSTIC SLIDE BLOCK 8 J HD-7/7500/9 SERIES SFETY ROLLER 2 C HD-7/7500/9 SERIES SINGLE SHEVE ROLLER SSEMBLY 2 D HD-7/7500/9 SERIES CROSSTUBE SHEVE SHFT WELDMENT 2 E HD/HDS LIGHT DUTY SERIES SFETY WELDMENT 2 B HD/HDS LIGHT DUTY SERIES SLCK SFETY WELDMENT 2 F E RING Ø25mm OD DIN IR CYLINDER, Ø19mm x 25 STROKE HHB M6 x 1 x M6 FLT WSHER NUT M6 x 1.0 NL SPRING Ø13mm x 90mm, SLCK SFETY SPRING Ø13mm x 89mm, IR CYLINDER 2 B FEMLE ROD END M6 x 33mm FTG ELB -04 COMP x -02 NPT E RING Ø32mm OD DIN ROTOR CLIP 10mm SS HHB M6 x 1 x HD IR CYLINDER SPCER 12mm 2 B HD IR CYLINDER SPCER 25mm 2 B DO NOT SCLE DRWING NME DTE DRWN 04/30/ LEMONWOOD DR. SNT PUL, C DIMENSIONS RE IN MM CHECKED - - THIRD NGLE PROJECTION TITLE: HD-9/9XL/XW CROSSTUBE SSEMBLY, SMLL WINDOW SIZE DWG. NO. REV PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS G THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. SCLE: 1:20 SHEET 1 OF 1

11 REVISION REV DESCRIPTION DTE EDITED BY ECO# E REPLCED WITH /19/2015 MR F REMOVED (2) ND (2) /25/2015 JM G UPDTED BOM REVISIONS 12/30/2015 JM DETIL SCLE 1 : 8 NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. SSEMBLE ITEMS S SHOWN NEXT SSEMBLY ITEM NO NUMBER DESCRIPTION QTY REV HD-9/9XW CROSSTUBE WELDMENT, LRGE WINDOW 1 E HD/HDS-7/7500/9/14, HDSO-14 SFETY PIN 2 E HD-7/7500/9/14/HDSO-14 PLSTIC SLIDE BLOCK 8 J HD-7/7500/9 SERIES SFETY ROLLER 2 C HD-7/7500/9 SERIES SINGLE SHEVE ROLLER SSEMBLY 2 D HD-7/7500/9 SERIES CROSSTUBE SHEVE SHFT WELDMENT 2 E HD/HDS LIGHT DUTY SERIES SFETY WELDMENT 2 B HD/HDS LIGHT DUTY SERIES SLCK SFETY WELDMENT 2 F E RING Ø25mm OD DIN HHB M6 x 1 x M6 FLT WSHER NUT M6 x 1.0 NL SPRING Ø13mm x 90mm, SLCK SFETY IR CYLINDER, Ø19mm x 25 STROKE FEMLE ROD END M6 x 33mm HHB M6 x 1 x FTG ELB -04 COMP x -02 NPT E RING Ø32mm OD DIN ROTOR CLIP 10mm SS HD IR CYLINDER SPCER 12mm 2 B HD IR CYLINDER SPCER 25mm 2 B SPRING Ø13mm x 89mm, IR CYLINDER 2 B DO NOT SCLE DRWING NME DTE DRWN 04/30/ LEMONWOOD DR. SNT PUL, C CHECKED - - THIRD NGLE PROJECTION TITLE: HD-9/9XL/XW CROSSTUBE SSEMBLY, LRGE WINDOW DIMENSIONS RE IN MM PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. SIZE DWG. NO SCLE: 1:20 REV G SHEET 1 OF 1

12 REVISION REV DESCRIPTION DTE EDITED BY ECO# C UPDTED BOM REVISIONS 04/28/2015 MR D UPDTED BOM REVISION 11/25/2015 JM E DDED (4) , (4) , (4) ND (8) UPDTED BOM REVISIONS 12/30/2015 JM DETIL SCLE 1 : DETIL B SCLE 1 : 20 NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. THRED M16 HRDWRE ONTO LDDER BOLTS S SHOWN 14 B NEXT SSEMBLY ITEM NO NUMBER PRT DESCRIPTION QTY REV HD-9/9XL/XW CROSSTUBE SSEMBLY, SMLL WINDOW 1 G HD-9/9XL/XW CROSSTUBE SSEMBLY, LRGE WINDOW 1 G HD-7P/7500BLX/9STX/9XW POWER POST WELDMENT 1 C HD-7P/7500BLX/9STX/9XW OFF SIDE POST WELDMENT 3 C HD-7P/7500BLX/9STX/9XW SFETY LDDER WELDMENT 4 B HD-7500BLX/9STX/9SWX/9XW POWER SIDE RMP SSEMBLY 1 U HD-7500BLX/9STX/ 9SWX/9XL/9XW OFFSIDE RMP WELDMENT 1 H HD-7/7500/9 SERIES TIRE STOP PLTE WELDMENT 2 F HD-7500BL/BLX, 9/ST/STX/XW DRIVE UP RMP SSEMBLY 2 F NUT M16 x NUT M16 x 2 NL WSHER M16 x 30mm FLT HDS-35 SPCER, SFETY LDDER, 17.5mm LG NUT M10 x 1.5 NL WSHER M10 x Ø20 FLT HHB M10 x 1.5 x 45mm 4 - DO NOT SCLE DRWING NME DTE DRWN 08/11/ LEMONWOOD DR. SNT PUL, C CHECKED - - THIRD NGLE PROJECTION TITLE: HD-9XW LIFT SUPERSTRUCTURE DIMENSIONS RE IN MM PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. SIZE DWG. NO SCLE: 1:40 REV E SHEET 1 OF 1

13 11 REVISION REV DESCRIPTION DTE EDITED BY ECO# C UPDTED BOM REVISION 01/08/2015 MR D REMOVED , , , , , ND , UPDTED BOM 08/13/ REVISION E REMOVED DDED (4) ND (8) /25/2015 JM DETIL SCLE 1 : NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING 2. INSERT PRTS BG INTO PRTS BOX FOR SHIPMENT 3. THRED WITH ONTO CBLES FOR SHIPMENT 4. HOSES ND CBLES IN REPRESENTTIONL FORM 5. (*) LENGTH FOR REFERENCE ONLY 3 17 NEXT SSEMBLY DIMENSIONS RE IN MM 18 ITEM PRT NO. NUMBER DESCRIPTION QTY. REV NUT M18 x 2.5 NL WHEEL CHOCK FLEX TUBE SSEMBLY 1320mm 1 B HD-9XW CBLE SSEMBLY Ø10 x 9613mm ST 1 E HD-9XW CBLE SSEMBLY Ø10 x 8007mm ST HD-9XW CBLE SSEMBLY Ø10 x 4883mm ST 1 D HD-9XW CBLE SSEMBLY Ø10 x 3263mm ST PUSH BUTTON IR SSEMBLY 1 F POWER UNIT VIBRTION DMPENER 1 B HD-7/7500/9 SERIES DRIVE UP RMP PIN 4 B HD-7/9 SERIES PRTS BG 1 E /4" POLY-FLO TUBING 17000*mm HD-SERIES FLEX TUBE BRCKET PLTE 1 F HD-SERIES FLEX TUBE NGLE 1 E WSHER M18 FLT HD-9STX/9XW HYD. HOSE SSY Ø6.4 x 3683mm 1 E B 3/4" x 4-3/4" HD-7P/7500/9 SERIES TOP PLTE WELDMENT 4 C HD-9 INSTLLTION MNUL SFETY MNUL LI / SM LIGN OIM OPERTION INSPECTION & MINTENNCE SFETY TIPS CRD LI-ST HD-9 SERIES CROSSTUBE COVER, PLSTIC FTG GRS M6x1 8 PRE DO NOT SCLE DRWING NME DTE DRWN 05/07/ LEMONWOOD DR. SNT PUL, C CHECKED - - THIRD NGLE PROJECTION TITLE: PRTS BOX HD-9XW PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. SIZE DWG. NO SCLE: 1:25 REV E SHEET 1 OF 1

14 REV REVISION DESCRIPTION DTE EDITED BY ECO# E UPDTED BOM REVISION 07/09/ F DDED , ND /14/2015 MR G DDED , REMOVED , UPDTED BOM REVISION 03/27/2015 MR ISOMETRIC VIEW FOR REFERENCE ONLY DO NOT SCLE NOTE: UNLESS OTHERWISE SPECIFIED SHEET 1 & 2 GRESE SELS PRIOR TO SSEMBLY PRESSURE TEST CYLINDER SSEMBLY 100% TO 3,600 PSI. (NO LEKS) MRK IN PPROXIMTE LOCTION WITH THE FOLLOWING INFORMTION: MNUFCTURER MONTH/ YER PRT NUMBER HERCULES HU MY BE USED IN PLCE OF CUP SEL UN PRKER 4615-SHD-01000, HERCULES ST-100 OR FM D-1000 MY BE USED IN PLCE OF RECO D-1000 DISOGRIN , HERCULES DRU OR PRKER UR MY BE USED IN PLCE OF RECO UN HERCULES POM MY BE USED IN PLCE OF WR HERCULES POM MY BE USED IN PLCE OF WR VERIFY HYDRULIC PORTS RE CPPED WITH PLUGS SECTION - SCLE 1 : 2 6 DIMENSIONS RE IN MM 10 PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. 7 OIL PRESSURE THIS SIDE ONLY ITEM NO PRT NUMBER DESCRIPTION QTY REV PISTON SSEMBLY Ø3.0 x Ø1.0 1 F CYLINDER TUBE WELDMENT Ø3.0 1 D HED CP Ø3.0 1 E CLEVIS PIN Ø25 x 89 1 C WR POM WER RING WR POM WER RING RECO UN PISTON SEL d25.40 D34.93 h CUP SEL UN PISTON SEL UN RECO D-1000 WIPER BUN 90 BCKUP RING BUN 70 O-RING GLYD GS GLYD RING PISTON SEL MODEL#211 HIR PIN/ LRGE NUT 1"-14 NL WSHER Ø2.0"x Ø1-1/16" x 5mm FLT /8-18 NPT PLSTIC SCREW PLUG 2 -- DO NOT SCLE DRWING NME DTE DRWN C 05/11/ LEMONWOOD DR. SNT PUL, C CHECKED C 08/27/2015 THIRD NGLE PROJECTION TITLE: CYLINDER SSEMBLY Ø3.0 x 82 SIZE DWG. NO SCLE: 1:4 REV G SHEET 1 OF 2

15 REVISION REV DESCRIPTION DTE EDITED BY ECO# C UPDTED NME TO INCLUDE NEXT SSEMBLY, UPDTED NEXT SSEMBLY 12/11/2008 C D REMOVED 9NX FROM TITLE 02/24/2010 C UPDTED NEXT SSEMBLY D-001 D-002 UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLIES 11/23/ /21/ E REPLCED WITH /12/2015 MR NOTE: UNLESS OTHERWISE SPECIFIED. 1. FOR ITEM 1 SPECIFICTIONS REFER TO PRT SPECIFICTION FORM 2. (*)ITEM 1 QTY FOR REFERENCE ONLY General Table NEXT SSEMBLY ITEM NO. PRT NUMBER DESCRIPTION QTY. REV Ø6.4 ID HYDRULIC HOSE 3617mm* FTG ELB Ø1/4 CRIMP x -04 JIC FTG NPL Ø1/4 CRIMP x -04 JIC 1 - DO NOT SCLE DRWING NME DTE DRWN C 01/18/ LEMONWOOD DR. SNT PUL, C DIMENSIONS RE IN MM TOLERNCES: 0. = ± = ±1.0 NGULR: MCH 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED CHECKED VB 02/06/2015 THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT DWG. NO. THE PROHIBITED. WRITTEN PERMISSION OF BENDPK INC. IS SHEET 1 OF 1 TITLE: SIZE HD-9STX/9XW HYD. HOSE SSY Ø6.4 x 3683mm SCLE: 1:2 REV E

16 REVISION REV. DESCRIPTION PRODUCTION RELESE DTE EDITED BY ECO# 12/24/2007 C CHNGED SURFCE FINISH FROM 3.2 µm TO 09/05/2008 GJ Ra µm -002 B B-001 B-013 UPDTED NEXT SSEMBLY UPDTE TUBE TO NEW STYLE, UPDTED NEXT SSEMBLY ND TITLE UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLIES 10/02/ /11/ /04/ /17/2013 C C C NOTE: UNLESS OTHERWISE SPECIFIED. 1. FOR ITEM 1 SPECIFICTIONS REFER TO PRT SPECIFICTION FORM 2. (*)ITEM 1 QTY FOR REFERENCE ONLY NEXT SSEMBLY HD/HDS/HDSO SERIES ITEM NO PRT NUMBER DESCRIPTION QTY. REV PE FLEX TUBE Ø34.5xØ mm* WQG1-M36/D34.5 CONNECTOR PLSTIC NUT M36 x DO NOT SCLE DRWING NME DTE DIMENSIONS RE IN MM TOLERNCES: 0. = ± = ± = ± = ±0.13 NGULR: MCH 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED MTERIL: SIZE: DRWN C 12/24/2007 CHECKED THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: SIZE DWG. NO LEMONWOOD DR. SNT PUL, C FLEX TUBE SSEMBLY 1320mm SCLE: 1:1 REV B SHEET 1 OF 1

17 1 10 REVISION REV DESCRIPTION DTE EDITED BY ECO# RMP STRP DISTNCE WS 2147 NOW 1969, G UPDTED NEXT SSEMBLY, UPDTED TITLE TO 06/03/ REFLECT WHERE USED H UPDTED BOM REVISION 08/20/ J UPDTED BOM REVISION 09/02/ NOTE: UNLESS OTHERWISE SPECIFIED. 1. BREK ND DEBURR LL SHRP EDGES 0.3mm 2. REMOVE LL WELD SPLTTER 3. PINT BENDPK BLUE 4. PPLY #30 GRIT LUMINUM OXIDE WHEN PINTING TO TOP ONLY FTER WELDING NEXT SSEMBLY ITEM PRT NO. NUMBER DESCRIPTION QTY REV HD-7500BLX/9STX/9SWX/ 9XW/9E EXTENDED RMP 1 E HD-7500/9 SERIES RMP STRP 1 B HD-7500/9 SERIES CYLINDER CLEVIS 1 C HD-7/7500/9 SERIES RMP SHEVE BUSHING 4 C IR LINE TROUGH Ø13 x Ø9.8 x B HYD. HOSE HOLDER PIN STOP 4 B HD-7/7500/9 SERIES DRIVE UP RMP HINGE TUBE 4 C HD-7PX SERIES, HD-9STX/9SWX/ 9XW/9E ROLLING BRIDGE BEM 1 D HD-7/9/14, HDS/HDSO-14, XR ROLLING JCK RIL CLOSEOUT 2 C HD-7500/9 SERIES 4-SHEVE RIGHT RMP BOLT PLTE 1 C HD-7500/9 SERIES 4-SHEVE LEFT RMP BOLT PLTE 1 C HD-7500/9 SERIES 4-SHEVE RMP END PLTE 1 B HD-7/7500/9 SERIES 2-SHEVE RMP BOLT PLTE 1 C HD-7/7500/9 SERIES 2-SHEVE RMP END PLTE 1 B IR LINE TROUGH Ø13 x Ø9.8 x DO NOT SCLE DRWING NME DTE DRWN C 11/28/ LEMONWOOD DR. SNT PUL, C DIMENSIONS RE IN MM TOLERNCES: 0. = ± = ±0.5 NGULR: 0. = 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED MTERIL: SIZE: CHECKED MT 09/13/2012 THIRD NGLE PROJECTION TITLE: PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. HD-7500BLX/9STX/ 9SWX/9XL/9XW POWER SIDE WELDMENT SIZE DWG. NO SCLE: 1:30 REV J SHEET 1 OF 4

18 3 1 REVISION REV DESCRIPTION DTE EDITED BY ECO# F F-001 RMP STRP DISTNCE WS 2082 NOW 1969, UPDTED TITLE TO REFLECT WHERE USED, UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLIES 06/03/ /27/ G G-001 G-002 G-003 UPDTED BOM REVISION UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLIES UPDTED NEXT SSEMBLIES 08/20/ /20/ /20/ /14/ H MOVED TO CENTER OF RMP 1/12/2015 MR NOTE: UNLESS OTHERWISE SPECIFIED. 1. BREK ND DEBURR LL SHRP EDGES 0.3mm 2. REMOVE LL WELD SPLTTER 3. PINT BENDPK BLUE 4. PPLY #30 GRIT LUMINUM OXIDE WHEN PINTING TO TOP ONLY FTER WELDING NEXT SSEMBLY ITEM NO NUMBER DESCRIPTION QTY REV HD-7/7500/9 SERIES EXTENDED RMP 1 C HD-7500/9 SERIES RMP STRP 1 B HD-7/7500/9 SERIES DRIVE UP RMP HINGE TUBE 4 C HD-7/7500/9 SERIES RMP END PLTE 2 C HD-7PX SERIES, HD-9STX/9SWX/ 9XW/9E ROLLING BRIDGE BEM 1 D HD-7/9/14, HDS/HDSO-14, XR ROLLING JCK RIL CLOSEOUT 2 C DO NOT SCLE DRWING DIMENSIONS RE IN MM TOLERNCES: 0. = ± = ±0.5 NGULR: 0. = 2 DRWN NME C DTE 11/05/2008 CHECKED C 08/27/2015 THIRD NGLE PROJECTION SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: SIZE DWG. NO LEMONWOOD DR. SNT PUL, C HD-7500BLX/9STX/ 9SWX/9XL/9XW OFFSIDE RMP WELDMENT SCLE: 1:20 REV H SHEET 1 OF 3

19 6 3 7 REVISION REV DESCRIPTION DTE EDITED BY ECO# C UPDTED BOM REVISION 04/01/ D UPDTED BOM REVISIONS 09/30/ CLRIFIED IR LINE TROUGH DISTNCES, WS 25 TO BOLT HOLE NOW 69 TO IR FITTING HOLE, E WS 25 TO BOLT HOLE NOW 69 TO IR FITTING 06/01/ HOLE, WS 25 NOW 19, WS 20 NOW 32, UPDTED BOM REVISIONS NOTE: UNLESS OTHERWISE SPECIFIED. 1. BREK ND DEBURR LL SHRP EDGES 0.3mm 2. REMOVE LL WELD SPLTTER 3. PINT BENDPK BLUE NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY REV HD-7W/7XW/9/9XW CROSSTUBE, SMLL WINDOW 1 B HD-7/7500/9 SERIES CROSS TUBE END PLTE #1 1 J HD-7/7500/9 SERIES CROSS TUBE END PLTE #2 1 J HD-7/7500/9 SERIES CROSS TUBE END PLTE #3 1 J HD-7/7500/9 SERIES CROSS TUBE END PLTE #4 1 J HD-7/9 SERIES CROSSTUBE SFETY BLOCK 2 B IR LINE TROUGH Ø13 x Ø9.8 x C IR LINE TROUGH Ø13 x Ø9.8 x C IR LINE TROUGH Ø13 x Ø9.8 x B IR LINE TROUGH Ø13 x Ø9.8 x B HD-7W/7XW/9/9XW CROSS TUBE STRP 2 DO NOT SCLE DRWING NME DTE DRWN 11/16/ LEMONWOOD DR. SNT PUL, C CHECKED C 08/26/2015 DIMENSIONS RE IN MM TOLERNCES: THIRD NGLE PROJECTION TITLE: 0. = ±1.5 HD-9/9XW CROSSTUBE 0.0 = ±0.5 WELDMENT, SMLL WINDOW NGULR: 0. = 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. SIZE DWG. NO SCLE: 1:15 REV E SHEET 1 OF 2

20 2 5 REVISION REV DESCRIPTION DTE EDITED BY ECO# C UPDTED BOM REVISIONS 04/01/ D UPDTED BOM REVISIONS 09/30/ CLRIFIED IR LINE TROUGH DISTNCES, WS 25 TO BOLT HOLE NOW 69 TO IR FITTING HOLE, E WS 25 TO BOLT HOLE NOW 69 TO IR FITTING 06/01/ HOLE, WS 25 NOW 19, WS 20 NOW 32, UPDTED BOM REVISIONS NOTE: UNLESS OTHERWISE SPECIFIED. 1. BREK ND DEBURR LL SHRP EDGES 0.3mm 2. REMOVE LL WELD SPLTTER 3. PINT BENDPK BLUE 3 NEXT SSEMBLY ITEM NO PRT NUMBER DESCRIPTION QTY REV HD-9/9XW CROSSTUBE, LRGE WINDOW 1 B HD-7/7500/9 SERIES CROSS TUBE END PLTE #1 1 J HD-7/7500/9 SERIES CROSS TUBE END PLTE #2 1 J HD-7/7500/9 SERIES CROSS TUBE END PLTE #3 1 J HD-7/7500/9 SERIES CROSS TUBE END PLTE #4 1 J HD-7/9 SERIES CROSSTUBE SFETY BLOCK 2 B IR LINE TROUGH Ø13 x Ø9.8 x C IR LINE TROUGH Ø13 x Ø9.8 x C IR LINE TROUGH Ø13 x Ø9.8 x B IR LINE TROUGH Ø13 x Ø9.8 x B HD-7W/7XW/9/9XW CROSS TUBE STRP 2 DO NOT SCLE DRWING NME DTE DRWN 11/16/ LEMONWOOD DR. SNT PUL, C DIMENSIONS RE IN MM TOLERNCES: 0. = ± = ±0.5 NGULR: 0. = 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED CHECKED C 08/26/2015 THIRD NGLE PROJECTION TITLE: PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. SIZE HD-9/9XW CROSSTUBE WELDMENT, LRGE WINDOW DWG. NO SCLE: 1:15 REV E SHEET 1 OF 2

21 REVISION REV. DESCRIPTION DTE EDITED BY ECO# B B /31/ /10/2008 MT GJ B-002 B-003 UPDTE SHEET TEMPLTE CHNGED SURFCE FINISH FROM 3.2 µm TO 1.6 Ra µm UPDTED NEXT SSEMBLY UPDTED NEXT SSEMBLY 10/30/ /12/2008 C C UPDTED TITLE TO REFLECT WHERE USED 02/26/2010 C D D-001 UPDTED TITLE TO REFLECT WHERE USED UPDTED NEXT SSEMBLIES 06/02/ /01/2011 C THRU 4 PL ISOMETRIC VIEW FOR REFERENCE ONLY DO NOT SCLE TYP FLME CUT TYP 304 NOTE: UNLESS OTHERWISE SPECIFIED. 1. BREK ND DEBURR LL SHRP EDGES 0.3mm. NEXT SSEMBLY MTERIL: SIZE: DO NOT SCLE DRWING DIMENSIONS RE IN MM TOLERNCES: 0. = ± = ±0.5 NGULR: 0. = 2 SURFCE FINISH 1.6 ISO Ra µm FOR MCHINED SURFCES UNLESS OTHERWISE SPECIFIED HR S 36 OR Q235 GB/T mm THK DRWN NME GJZ DTE 02/29/2008 CHECKED THIRD NGLE PROJECTION PROPRIETRY ND CONFIDENTIL THE INFORMTION CONTINED IN THIS DRWING IS THE SOLE PROPERTY OF BENDPK INC. NY REPRODUCTION IN PRT OR S WHOLE WITHOUT THE WRITTEN PERMISSION OF BENDPK INC. IS PROHIBITED. TITLE: SIZE DWG. NO LEMONWOOD DR. SNT PUL, C HD-7P/7500/9/14 SERIES POST BSE PLTE SCLE: 1:3 REV D SHEET 1 OF 1

22 PRT SPECIFICTION FORM BENDPK Number: MRP Description: HD-9 INSTLLTION MNUL Date: 05/12/2016 ECO : Engineering Specification pplication: INSTLLTION MNUL Detailed Description: 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

23 PRT SPECIFICTION FORM BENDPK Number: MRP Description: SFETY MNUL LI / SM 93-1 Date: 12/28/2010 ECO : Engineering Specification pplication: LI SFETY MNUL Detailed Description: 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

24 PRT SPECIFICTION FORM BENDPK Number: MRP Description: LIGN OIM OPERTION INSPECTION & MINTENNCE Date: 12/28/2010 ECO : Engineering Specification pplication: LI OPERTION INSPECTION & MINTENNCE MNUL Detailed Description: f 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

25 PRT SPECIFICTION FORM BENDPK Number: MRP Description: WRNING LI/WL 200 Date: 05/06/2013 ECO : Engineering Specification pplication: LI 4 POST SFETY STICKER KIT Detailed Description: SIZE: 11 L x 8.5 W (279mm x 216mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

26 PRT SPECIFICTION FORM BENDPK Number: MRP Description: SFETY TIPS CRD LI-ST 90 Date: 12/28/2010 ECO : Engineering Specification pplication: LI SFETY TIPS Detailed Description: 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

27 PRT SPECIFICTION FORM BENDPK Number: MRP Description: BENDPK LBEL; 4 x 38" WHITE INK Date: 05/13/2015 ECO : Engineering Specification pplication: BENDPK LBEL Detailed Description: SIZE: 38 L x 4.25 W (965mm x 108mm) Material: Yellow Represents Clear dhesive PET Size: 4.25 W x 38 H Thickness: 4 Mil Finish: Polished Ink: U.V. protected, Opaque White Print Process: Silk Screen, 85 line-screen (Opaque White ink, clear adhesive PET will fill in blank areas.) Lamination: Clear-gloss over-laminate for abrasion, chemical, and ultra violet protection 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

28 bove-ground Lifts 1645 Lemonwood Drive Santa Paula, C U.S.. (805) P/N

29 PRT SPECIFICTION FORM BENDPK Number: MRP Description: MX CP DNGER 9K Date: 05/06/2013 ECO : Engineering Specification pplication: LIFT CPCITY STICKER Detailed Description: SIZE: 5 L x 4 W (127mm x 100mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

30

31 PRT SPECIFICTION FORM BENDPK Number: MRP Description: MNUFCTURER LBEL Date: 05/07/2013 ECO : Engineering Specification pplication: MNUFCTURER LBEL Detailed Description: SIZE: L x W (130mm x 130mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

32

33 PRT SPECIFICTION FORM BENDPK Number: MRP Description: 4-POST SFETY DECL Date: 05/06/2013 ECO : Engineering Specification pplication: 4-POST SFETY DECL Detailed Description: SIZE: 23 L x 4 W (584m x 100mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

34 Danger Safety Locks Engaged OK to Proceed Safety Ladder Safety Lock Not Engaged Remain Clear Safety Ladder Slack Safety Primary Safety Slack Safety Primary Safety Visually Confirm that all Primary Safety Locks are Engaged Before Entering Work rea. Suspension components used on this lift are intended to raise and lower lift only and are NOT meant to be load-holding devises. Remain clear of elevated lift unless visual confirmation is made that all primary safety locks are fully engaged and the lift is LOWERED onto the safety locks. Refer to installation/operation manual for proper safety lock procedures and/or further instruction. Warning Wire Rope Inspection and Maintenance Lifting cables should be replaced every (3) three years or when visible signs of damage are apparent. DO NOT USE LIFT WITH DEFECTIVE OR WORN CBLES. Wire rope should be maintained in a well-lubricated condition at all times. Wire rope is only fully protected when each wire strand is lubricated both internal and external. Excessive wear will shorten the life of the wire rope. The factory suggests wire rope lubricant that penetrates to the core of the rope and provides long-term lubrication between each individual strand. In order to make sure that the inner layers of the rope remain well lubricated, lubrication should be carried out at intervals not exceeding three (3) months during operation. ll sheaves and guide rollers in contact with the moving wire rope should be given regular visual checks for surface wear and lubricated to make sure that they run freely. This operation should be carried out at appropriate intervals generally not exceeding three (3) months during operation. For all sheave axles, the factory recommends standard wheel bearing grease. For all sheaves and/or guide rollers, the factory recommends 90-WT gear oil or similar heavy lubricant applied by any method including pump/spray dispensing, brush, hand and/or swabbing. Failure to read, understand and follow these instructions may cause death or serious injury. Read and understand these instructions before using lift. Important Operation / Maintenance Instructions - Please Read To Raise Lift 3 Position vehicle tires at the center of each runway. 3 Set parking brake or use wheel chock to hold vehicle in position. 3 Before raising vehicle, be sure all personnel are clear of lift and surrounding area. Pay careful attention to overhead clearances. 3 Raise lift to desired height by pressing push button on power unit. 3 Maintain visual contact with vehicle and surrounding area at all times while lowering lift. 3 STOP IMMEDITELY if load shifts or becomes unlevel. 3 fter vehicle is raised to desired height, lower lift onto the nearest safety lock. Do not allow cables to become excessively slack. 3 LWYS INSURE LL PRIMRY SFETY LOCKS RE ENGGED before entering work area. To Lower Lift 3 Before lowering vehicle, be sure all personnel, tools and equipment are clear of lift and surrounding area. 3 Raise lift by pressing RISE BUTTON on power unit. Elevate lift at least two inches to allow adequate clearance for locks to clear. 3 Press push button IR SFETY VLVE and HOLD. 3 Lower vehicle by pressing power unit lowering handle until lift has descended completely. 3 When lowering lift PY CREFUL TTENTION that all personnel and objects are kept clear. 3 LWYS keep a visual line of site on lift T LL TIMES. 3 LWYS make sure that LL LOCKS are disengaged. If one of the locks inadvertently engages on descent, lift and/or vehicle may disrupt causing personal injury or death. Required Monthly Maintenance 3 LWYS consult operation manual for factory recommended maintenance. 3 djust lift cables to ensure lift raises level and safety locks engage simultaneously. 3 Check all chain/cable connections, bolts and pins to insure proper mounting. 3 Visually inspect safety locks for proper operation. 3 Visually inspect concrete floor. DO NOT USE LIFT if concrete foundation shows signs of deterioration. 3 Inspect all anchor bolts and retighten if necessary. 3 Check columns for squareness and plumb. 3 Inspect all bolts and/or fasteners making sure they are properly secured. 3 Make a visual inspection of LL MOVING PRTS and check for excessive signs of wear. 3 Replace LL FULTY PRTS before lift is put back into operation. Warning 1. WRNING: If cement anchor bolts are loose, or any component of the lift is found to be defective, DO NOT USE LIFT! 2. Never operate the lift with any person or equipment below. 3. Never exceed rated capacity. 4. lways insure safety locks are engaged before any attempt is made to work on or near vehicle. 5. Never leave lift in an elevated position unless the safety locks are engaged. 6. Do not permit electric motor to get wet! Motor damage caused by dampness is not covered under warranty. P/N

35 PRT SPECIFICTION FORM BENDPK Number: MRP Description: PRODUCT DT LBEL Date: 05/06/2013 ECO : Engineering Specification pplication: PRODUCT DT LBEL Detailed Description: SIZE: 2.3 L x 4.5 W (58mm x 114mm) 2. Vendor Information 1) pproved Vendor Vendor Part # Contact # Preferred Vendor

36

37 PRT SPECIFICTION FORM BENDPK Number: MRP Description: LBEL D (4-POST LIFTS CE) Date: 12/04/2015 ECO : Engineering Specification pplication: DT SERIL TG, 4-POST LIFTS, CE Detailed Description: SIZE: 3.38 L x 3.38 W (85.7mm x 85.7mm) 2. Vendor Information (Or for Reference) pproved Vendor Vendor Part # Contact # Preferred Vendor 1) 2) OR BENDPK ENGINEERING PPROVED EQUIVLENT

38 Model Number Santa Paula, C US Serial Number Lift Capacity Description Rolling jack max cap. max psi / bar Voltage VC, Hz, 1 Ph VC, Hz, 3 Ph VC, Hz, 1 Ph VC, Hz, 3 Ph Date of MFG. DNGER! Disconnect Power Before Servicing Warranty void if data plate is removed PN

39 2016 CE-pproved 4 Post Lifts Colors & Graphics 4/7/16 CONFIDENTIL INFORMTION. You may not disclose, print, copy or disseminate this information. Unauthorized use is a violation of federal criminal law.

40 4 Post Lifts Product Decal Positioning B C Danger safety Locks engaged ok to proceed safety Lock not engaged ReMain clear SafETy LaDDER SafETy LaDDER SLack SafETy SLack SafETy PRimaRy SafETy PRimaRy SafETy VisuaLLy confirm that all primary safety Locks are engaged BeFoRe entering WoRk area. Suspension components used on this lift are intended to raise and lower lift only and are NOT meant to be load-holding devises. Remain clear of elevated lift unless visual confirmation is made that all primary safety locks are fully engaged and the lift is LOWERED onto the safety locks. Refer to installation/operation manual for proper safety lock procedures and/or further instruction. Warning WiRe Rope inspection and Maintenance Lifting cables should be replaced every (3) three years or when visible signs of damage are apparent. DO NOT USE LIFT WITH DEFECTIVE OR WORN CBLES. Wire rope should be maintained in a well-lubricated condition at all times. Wire rope is only fully protected when each wire strand is lubricated both internal and external. Excessive wear will shorten the life of the wire rope. The factory suggests wire rope lubricant that penetrates to the core of the rope and provides long-term lubrication between each individual strand. In order to make sure that the inner layers of the rope remain well lubricated, lubrication should be carried out at intervals not exceeding three (3) months during operation. ll sheaves and guide rollers in contact with the moving wire rope should be given regular visual checks for surface wear and lubricated to make sure that they run freely. This operation should be carried out at appropriate intervals generally not exceeding three (3) months during operation. For all sheave axles, the factory recommends standard wheel bearing grease. For all sheaves and/or guide rollers, the factory recommends 90-WT gear oil or similar heavy lubricant applied by any method including pump/spray dispensing, brush, hand and/or swabbing. Failure to read, understand and follow these instructions may cause death or serious injury. Read and understand these instructions before using lift. important operation / Maintenance instructions - please Read to Raise LiFt 3 Position vehicle tires at the center of each runway. 3 Set parking brake or use wheel chock to hold vehicle in position. 3 Before raising vehicle, be sure all personnel are clear of lift and surrounding area. Pay careful attention to overhead clearances. 3 Raise lift to desired height by pressing push button on power unit. 3 Maintain visual contact with vehicle and surrounding area at all times while lowering lift. 3 STOP immediately if load shifts or becomes unlevel. 3 fter vehicle is raised to desired height, lower lift onto the nearest safety lock. Do not allow cables to become excessively slack. 3 LWYS INSURE LL PRIMRY SFETY LOCKS RE ENGGED before entering work area. to LoWeR LiFt 3 Before lowering vehicle, be sure all personnel, tools and equipment are clear of lift and surrounding area. 3 Raise lift by pressing RISE BUTTON on power unit. Elevate lift at least two inches to allow adequate clearance for locks to clear. 3 Press push button IR SFETY VLVE and HOLD. 3 Lower vehicle by pressing power unit lowering handle until lift has descended completely. 3 When lowering lift PY CREFUL TTENTION that all personnel and objects are kept clear. 3 LWYS keep a visual line of site on lift T LL TIMES. 3 LWYS make sure that LL LOCKS are disengaged. If one of the locks inadvertently engages on descent, lift and/or vehicle may disrupt causing personal injury or death. RequiRed MonthLy Maintenance 3 LWYS consult operation manual for factory recommended maintenance. 3 djust lift cables to ensure lift raises level and safety locks engage simultaneously. 3 Check all chain/cable connections, bolts and pins to insure proper mounting. 3 Visually inspect safety locks for proper operation. 3 Visually inspect concrete floor. DO NOT USE LIFT if concrete foundation shows signs of deterioration. 3 Inspect all anchor bolts and retighten if necessary. 3 Check columns for squareness and plumb. 3 Inspect all bolts and/or fasteners making sure they are properly secured. 3 Make a visual inspection of LL MOVING PRTS and check for excessive signs of wear. 3 Replace LL FULTY PRTS before lift is put back into operation. bove-ground Lifts Total of Lemonwood Drive Santa Paula, C U.S.. (805) P/N PN BPK Post Branding Decal-Large_ pdf: Material: Clear dhesive PET Size: 4.25 W x 38 H Thickness: 4 Mil Finish: Polished Ink: U.V. protected, Opaque White Print Process: Silk Screen, 85 line-screen (Yellow color in file represents what should be clear PET material and SHOULD NOT print as Yellow ink. White area in file represents Opaque White ink.) Lamination: Clear-gloss over-laminate for abrasion, chemical, and ultra violet protection Warning WaRning 1. WaRNiNG: If cement anchor bolts are loose, or any component of the lift is found to be defective, DO NOT USE LIFT! 2. Never operate the lift with any person or equipment below. 3. Never exceed rated capacity. 4. lways insure safety locks are engaged before any attempt is made to work on or near vehicle. 5. Never leave lift in an elevated position unless the safety locks are engaged. 6. Do not permit electric motor to get wet! Motor damage caused by dampness is not covered under warranty. P/N li_4_post_labels.pdf: (Order Labels from LI) PN _Post_Safety_Decal.pdf: Size: 4 W x 23 H Material: White Vinyl Pressure Sensitive dhesive Thickness: 4 Mil Ink: U.V. protected CMYK 2/C Process Finish: Polished Print Process: Offset Lithography line-screen or 300 p.p.i. for digital Lamination: Clear-gloss over-laminate for abrasion, chemical, and ultra violet protection

41 * D 4 Post Lifts Product Decal Positioning *Max. Cap. Danger.pdf: Size: 4 W x 5 H *E P/N Max Cap. Danger 7k P/N Max. Cap. Danger 7500 P/N Max Cap. Danger 9k P/N Max. Cap. Danger 14K P/N Max Cap. Danger 18k P/N Max. Cap. Danger 27K P/N Max. Cap. Danger 35K P/N Max. Cap. Danger 40K Material: White Vinyl Pressure Sensitive dhesive Thickness: 4 Mil Ink: U.V. protected CMYK 2/C Process Finish: Polished Print Process: Offset Lithography line-screen or 300 p.p.i. for digital Lamination: Clear-gloss over-laminate for abrasion, chemical, and ultra violet protection P/N NRTL_Lifting_Cap_Label_7K P/N NRTL_Lifting_Cap_Label_ 7500 P/N NRTL_Lifting_Cap_Label_9k P/N NRTL_Lifting_Cap_Label_14k P/N NRTL_Lifting_Cap_Label_18k P/N NRTL_Lifting_Cap_Label_27k P/N NRTL_Lifting_Cap_Label_35K P/N NRTL_Lifting_Cap_Label_40K *DEPENDS ON LIFT MODEL ND CPCITY *NRTL_Lifting_Cap_Label_.pdf: Size: 4.5 W x 3.25 H Material: White Vinyl Pressure Sensitive dhesive Thickness: 4 Mil Ink: U.V. protected CMYK 2/C Process Finish: Polished Print Process: Offset Lithography line-screen or 300 p.p.i. for digital Lamination: Clear-gloss over-laminate for abrasion, chemical, and ultra violet protection F PN Product_Data_Label_ New.pdf: Size: 4.5 W x 2.3 H Material: White Vinyl Pressure Sensitive dhesive Thickness: 4 Mil Ink: U.V. protected CMYK 2/C Process Finish: Polished Print Process: Offset Lithography line-screen or 300 p.p.i. for digital Lamination: Clear-gloss over-laminate for abrasion, chemical, and ultra violet protection G PN H 2015_Serial_Tag-D jpg: Size: 3 W x 3 H Material:Material: 2 Mil. Matte Silver Polyester (Flex-PSE) Print using thermal transfer printer with resin ribbon Ink: 1 Color-Black PN LI-Gold-Label jpg **FOR LI PPROVED LIFTS ONLY

42 4 Post Lifts Product Decal Positioning **FOR LI PPROVED LIFTS ONLY D, H, G, F Front of Post (Top to Bottom) (Front & Back of post) B Side of Post E, C Back of Post (Top to Bottom) Place 1.25 from top of Power Unit bracket to the bottom of LI Label. (Front & Back of post)

43 4 Post Lifts Packaging Serial_Tag_New-2015_Peel_Off jpg: Size: 3 W x 3 H Material: 2 Mil. Matte Silver Polyester (Flex-PSE) Print using thermal transfer printer with resin ribbon Ink: 1 Color-Black PN Do not remove back sheet of this portion to prevent from sticking completely as shown in image. Manufacturer Packaging Label: Size: 5 W x 5 H Material: White adhesive paper Ink: U.V. protected CMYK 2/C Process Print Process: Offset Lithography line-screen or 300 p.p.i. for digital