Force 100 dan. Standards. Piston Rod Sealed gas springs PED 97/23/EC PED 97/23/EC PED 97/23/EC PED 97/23/EC ISO ISO ISO ISO 11901
|
|
|
- Bertram Mason
- 6 years ago
- Views:
Transcription
1 uerza: 5 orce Piston Rod ealed gas springs Ø6 Ø2 Ø5 Ø Ø22 Model Z-5 Z-7 R- G- Initial () max () troke () xtroke+42 2xtroke+42 2xtroke+42 2xtroke * tandards 7/2/EC IO 7/2/EC IO 7/2/EC IO 7/2/EC IO EM EM EM EM NITROG..U. lbert Einstein, P.T. de Álava - 5 Miñano (ÁV) PIN NITROG..U. lbert Einstein, P.T. de Álava - 5 Miñano (ÁV) PIN 22 2
2 uerza: 5 Z-5 Z-5 Ø6 orce / Pressure langes (2ºC) V GREEN 45 Z BUE R RED 8 5 Ø2 7 R.8 x YEOW 5 8 Ordering example: 4 x Z-5- V () (2) (2ºC,8 ) Z No. Z No. Z No. Z No. Z No.4 X-5 Z No.4 Z No Z No.5 Z No Z No.6 Z No.7 2 Ø6.6 Z No.7 Z No. 24 Ø4 Working temperature -8ºC Min. security stroke % Max. Charging pressure 8 Temperature related force increase +.4%/ºC Repair Kit Non-repairable Min. Charging pressure Max. working speed.6 m/s inkable No Ø+.5 X-5 NITROG..U. lbert Einstein, P.T. de Álava - 5 Miñano (ÁV) PIN NITROG..U. lbert Einstein, P.T. de Álava - 5 Miñano (ÁV) PIN 24
3 . uerza: 5 7 R.8 (2ºC) V GREEN 8 45 Z BUE 5 R RED 5 5 YEOW 7 8 Z-7 Z-7 orce / Pressure langes 8 x Ø5 Ordering example: 4 x Z-7- R () (2) (2ºC,8 ) Z No.5 Z No.5 Z No.5 Z No.5 Z No.5 X-7 Z No.6 Z No Z No.8 Z No Z No. Z No. 24 Ø6.6 Z No.2 Z-7-7 No.4 27 Ø7 Working temperature -8ºC Min. security stroke % Max. Charging pressure 8 Temperature related force increase +.4%/ºC Repair Kit Non-repairable Min. Charging pressure Max. working speed.6 m/s inkable No Ø+.5 X-7 NITROG..U. lbert Einstein, P.T. de Álava - 5 Miñano (ÁV) PIN NITROG..U. lbert Einstein, P.T. de Álava - 5 Miñano (ÁV) PIN 26 27
4 .. uerza: Ordering example: 4 x R-- V *The new cylinder will be supplied when the stock runs out. Ø PHING OUT while stocks last x5 () NEW MODE* 7 R Ø x5 (2) (2ºC,8 ) R No. R No.2 No.7 R No.8 R No.8 R No.8 R No. R No.4 R No.7 R No (2ºC) V GREEN 6 Z BUE 5 R RED 7 4 YEOW 8 R- R- orce / Pressure langes XQ XV Ø45 2 Ø45 Working temperature -8ºC Min. security stroke % Max. Charging pressure 8 Temperature related force increase +.4%/ºC Repair Kit Non-repairable Min. Charging pressure Max. working speed.6 m/s inkable No Ø+.5 XQ- XV- NITROG..U. lbert Einstein, P.T. de Álava - 5 Miñano (ÁV) PIN NITROG..U. lbert Einstein, P.T. de Álava - 5 Miñano (ÁV) PIN 28 2
5 uerza: 5 Ordering example: 4 x G-- *The new cylinder will be supplied when the stock runs out. Ø22 Ø x5 Thread for maintenace () NEW MODE* G Ø22 OUT PHING while stocks last x5 (2) (2ºC,8 ) G No.2 G No. 2 No.4 G No.6 G No.8 G No. G No.5 G No (2ºC) V GREEN 6 Z BUE 5 R RED 7 4 YEOW 8 G- G- tandard Dimensions orce / Pressure langes tandard Dimensions Working temperature -8ºC Min. security stroke % Max. Charging pressure 8 Temperature related force increase +.4%/ºC Repair Kit KIT G- Min. Charging pressure Max. working speed.6 m/s inkable No Ø+.5 NITROG..U. lbert Einstein, P.T. de Álava - 5 Miñano (ÁV) PIN NITROG..U. lbert Einstein, P.T. de Álava - 5 Miñano (ÁV) PIN
Force dan. Standards. Piston Rod Sealed gas springs PED 97/23/EC PED 97/23/EC PED 97/23/EC PED 97/23/EC ISO ISO ISO 11901
uerza: art 33 /3/CE orce - 3 Piston Rod ealed gas springs G--8 Max Presion carga 14 Model KC-3 K-3 CN- G-3 Initial () max () troke () 3-3 65-3 xtroke+3 xtroke+3 xtroke+ xtroke+6-5 -5-5 -5 * tandards /3/EC
Model T TC TS TSC Initial F (dan) L max (mm) Stroke (mm) Standards
uerza: 15 orce 2 orce 2 Piston Rod ealed gas springs Bore ealed gas springs Ø15 Ø15 Ø Ø G-15- Ø15 Ø15 Ø15 Ø15 Model KP-2 HD-2 Initial () max () troke () 2 2 2xtroke1 2xtroke6 19-125 25- * Model T-1 TC-1
PED 97/23/EC ISO VDI 3003 CNOMO EM
uerza: art 7/2/CE orce 25 Piston Rod ealed gas springs G-- Max Presion carga Model KP- NR- NT- K-25 M-25 HD- Initial () max () troke () 25 25 2xtroke+45 2xtroke+5 2xtroke+5 2xtroke+6 2xtroke+5 2xtroke1-5
Ø60 PED 97/23/EC ISO VDI 3003 CNOMO EM
uerza: art /2/CE orce Piston Rod Sealed gas springs G-- Max Presion carga Model KP- NR- NT- K- M- HD- Initial () max () Stroke () 2xStroke+5 2xStroke+62 2xStroke+62 2xStroke+ 2xStroke+ 2xStroke+ 16-5 16-5
GAS SPRING CATALOGUE CUSTOMIZED FOR
G PRING CTOGUE CUTOMIZED FOR Worldwide NITROG is a global company that has a worldwide presence through its own network of subsidiaries and an extensive distributor network. NITROG PRING GMBH Frankfurt,
Specification. Model MCRPL MCRPLF. Acting type Double acting Double acting. Tube I.D.(mm) , ,40,50 63
* series pecification Model Acting type Double acting Double acting (mm) 16 25 32,40 16 25 32,40,50 63 Port size M5 G1/8 G1/4 M5 G1/8 G1/4 G3/8 No. of port 3 Medium Operating pressure range troke range
Super Compact CU4 420 CU
Product eries Gas prings including tandard Mounts uper ompact U4 420 U4 18300 Edition 1.2012 opyright KALLER Would you like to order this product? All available information at. FEATURE AND BENEFIT UPER
guide unit, double acting Technical details
Technical details Operating pressure Temperature range Operating speed Medium 1... 10 bar -20 C... +80 C 50... 500 mm/s iltered, oil-free and dried compressed air according to ISO 8573-1:2010, Class 7:2:4,
PRA/182000, PRA/182000/M ISO/VDMA Profile cylinders
P/182000, P/182000/M IO/VDM Profile cylinders onforms to IO 15552, IO 6431, VDM 24562 and NFE 49-003-1 Profile barrel with concealed tie rods High performance, stability and reliability Polyurethane seals
Guide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
CJ2-Z. Cushion. Rubber bumper (Standard) Air cushion
eries ow to Order 1/ /22 J2 ø1, ø ir ylinder Ro lean series 1 ushion Rubber bumper (tandard) ir cushion 1 J 2 L R M9W 21 J 2 L R M9W opper, fluorine and siliconefree + Low particle generation 21 22 Vacuum
ISO Technical details
Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke
Air Cylinder. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing. Symbol Tube material Polyurethane Soft nylon
Air Cylinder Double Acting: ø/ingle Acting pring Return: ø2., ø Variations eries tandard B Basic mm Double acting ingle acting ingle rod ingle rod pring return 2. tandard stroke,, 1,,,, 1, How to Order/Double
SCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 to 60 kn The SCHMIDT PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities
DN series - Standard cylinder
series - cylinder Double piston packing type series ISO-431 specification series Provide CAD external dimension. DMB DU K Rod Locking his product : E End lock Use for longer stroke request DCK2 DCQ Pin
DIE STORAGE GAS SPRING
DIE STORGE GS SPRING Worldwide NITROGS is a global company that has a worldwide presence through its own network of subsidiaries and extensive distributor network. NITROGS SPRINGS GMBH Frankfurt, Germany
Pin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
Push-back Probes. Push-back Probes VF VF VF VF 5 167
Technical Information ontents V 25 164 V 3 165 are used when checking the locking in of the connector contacts into connectors. The are available with spring forces up to 34N, which represents the spring-force
AIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
Series MHK2. Wedge Cam Operation Slide Guide Air Gripper (2 Finger)
Wedge Cam Operation lide Guide Air Gripper (2 inger) ø2, ø, ø2, ø2 oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials tandard: Carbon steel Optional:
Dual Rod Cylinder: Double Rod Type. How to Order. Load voltage Auto switch model Perpendicular In-line 3-wire (NPN equivalent) Y7NWV Y7NW 5 V, 12 V
Dual Rod Cylinder: Double Rod Type eries CXW ø, ø, ø, ø, ø2, ø32 CX W L How to Order 0 Y7W M L Double rod type earing type lide bearing all bushing bearing ore size/troke ore size,,,,,,,,,,,,,,, 2, 32,
On-off Valves MS-EM, Inch Series Overview
On-off Valves M-EM, Inch eries Overview Manually operated on-off valve for pressurising and exhausting pneumatic systems 2 sizes: M4 grid dimension.6 in, M6 grid dimension 2.4 in Detailed product information
AIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
RZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
Heavy-Duty Shock Absorbers
Heavy-uty hock bsorbers ONLINE Calculation + 2 / 3 C ownload m H m g election LLING M m Example ormula & Calculation election H m = 0 H = 1,5 m = 0,4 m X = 1/h n = 1 W k = m g H = 14.715 Nm W = m g = 3.924
Screw-in RTD temperature probes with plug connector
Data sheet 902040 Page 1/6 s with plug connector Temperature range from -50 to +270 C Shakeproof design Application areas: utility vehicles, construction and agricultural machinery, motors, compressors
CJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1.
eries -/- / CJ2 ir cylinder / ø, ø, ø ow to Order Clean eries Vacuum suction type Cushion Rubber bumper (tandard) ir cushion (except ø) - C D J 2 L - R 7B 21 - C D J 2 L - R 7B Copper, fluorine and silicon-
Pin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected.
Pin ylinders eries JP/JP auto switches can even be mounted on a cylinder with ø ( mm stroke). uto switch One-touch fitting can be connected. (Panel mount type) ø One-touch fitting, miniature fitting, and
Climax Pneumatics Cnomo NFE Cylinders
Climax Pneumatics Cnomo NFE 49001 Cylinders End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane Chromium Coated Steel Working Pressure
Page
Tecnoinanles Page 68 69 69 70 70 71 72 72 72 www.tecnoin.com 1 1 5 3 S O I D N D E W I T T R E D E D I N S E R T S Coe c t Color 115312301 124 109 ± 1 M6 45 21 10 Black 115314301 148 132 ± 1 M8 54 24 14
Valve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries /, 12,,,,,,, 3,, eries Variations eries eries Action Built-in magnet With air cushion tandard variations Built-in One-touch fitting With auto switch With strong scraper Page CX ouble acting -- CY
With Auto Switch/Double Acting Type, Single Acting Type. Bore Size (mm) : ф12, ф16, ф20, ф25, ф32, ф40, ф50, ф63, ф80, ф100. Symbol.
With Auto witch/double Acting Type, ingle Acting Type Bore ize : ф, ф16,,,,,,, ф, ф PA AVIN DIN IT WIT BOR IZ AUTO WIT APAB YINDR FOR PIA APPIATION MANUFATURIN RTIFID TO IO 91&9 TANDARD ymbol Double Acting
T2 Mini Series. Mini Nitrogen Gas Springs. One-half inch diameter T2-50. Three-quarter inch diameter T2-90. One-inch diameter T2-180
T2 Mini eries Mini Nitrogen Gas prings One-half inch diameter T2-50 Three-quarter inch diameter T2-90 One-inch diameter T2-180 tripper springs with special model conforming to GM Global tandard Table of
Axial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 07.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
September 2012 JLe HIGH PRESSURE PUMP HPW 1600/ (LS)
1 HIGH PRESSURE PUMP HPW 1600/15-140 September 2012 JLe OUTLINE DIMENSIONS WP P T S 1 3 S 150 Ø 8.0 30 90 155 405 155 195 5 30 40 M 10 4 pcs. HYDRAULIC FLOW l/min, max. 140 FLUID CONNECTIONS HYDRAULIC
Axial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 02.2017 Replaces: 07.2016 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
Compact Nitrogen Gas Springs / 90.60N Series
Catalog No. C09112 Compact 90.60 / 90.60N eries 90.60 / 90.60N eries 90.60N.00500 0.5 ton / 5 kn ø 16.5 2 x R1 C L ø44.5 G 1/8 Port 2 x 12.5 Deep Force Graph FORCE (dan) 665 625 580 535 490 445 Based on
Mechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.
Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc
Axial piston variable pump A15VSO, A15VLO series 10 (US-Version)
xial piston variable pump 15VO, 15VLO series 10 (U-Version) R- 92800 Edition: 11.2013 Replaces:. izes 110 to 280 Nominal pressure 5100 psi (350 bar) Maximum pressure 6100 psi (420 bar) Open circuit Features
Axial piston variable double pump A28VLO Series 10
Axial piston variable double pump A28VLO eries 10 RE 93110 Edition: 04.2016 Replaces: 12.2015 izes 280 Nominal pressure 350 bar Maximum pressure 420 bar Open circuit Features Variable axial piston double
OUTLINE DIMENSIONS HIGH PRESSURE PUMP HDF 40/40-8 1/6. High pressure pump HDF 40/40-8. HYDRAULIC FLOW l/min, max. 10. HYDRAULIC PRESSURE bar, max.
1/6 HIGH PRESSURE PUMP HDF 40/40-8 OUTLINE DIMENSIONS HYDRAULIC FLOW l/min, max. 10 HYDRAULIC PRESSURE bar, max. 220 WATER DISCHARGE l/min, max. 40 WATER PRESSURE bar, max 40 3 4 WEIGHT kg 8 315 P T 1
How to Order. Standard stroke (mm) ø10 15, 30, 45, 60
ingle Acting, ingle Rod, pring Return/Extend eries K ø, ø pring extend pring return B L D Without auto switch With auto switch mm mm Basic Axial foot Rod side flange Double clevis K L CDJ2K L How to Order
Catalog No. C09101B. SC Series. Super Compact Nitrogen Gas Springs PED 2014/68/EU COMPLIANT
atalog No. 09101B uper ompact Nitrogen Gas prings eries PED 2014/68/EU OMPIANT uper ompact Nitrogen Gas prings Introduction DADO produces top quality products at competitive prices and provides a superior
Maximum force range from 15 kn to 220 kn
SCHMIDT HydroPneumaticPress Maximum force range from 1 kn to 220 kn The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for transforming, joining and assembling optimally within
Flexi Press H-Model, Standard
Flexi Press H-Model, Standard The modern workshop press FlexiPress is our strong and reliable workshop press for all requests. All models are delivered with a generous workspace and a double-acting cylinder.
OUTLINE DIMENSIONS HIGH PRESSURE PUMP HPW 220/50-70 HIGH PRESSURE PUMP HPW 220/50-70-PA
1/6 February 2014 JLe OUTLINE DIMENION Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive even in hard environment. mall size,
AIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23
AIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER 3+3 20 PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23 404 100 / 407 200 / 409 200 PUMPMASTER 3 & 3+3 PUMPMASTER 3, 55:1 PRESSURE RATIO
Technical data. Standards: IEC/EN chromated and painted Protection class: IP 67 to EN 60529
B 20 16 21,5 M 16x1,5 60 5 1 52 Aluminium enlosure Long life on-contacting principle 1 Reed contact Particularly resistant to vibration Available for actuation from front or side Actuating distance up
SCHMIDT PneumaticPress
Maximum pressing force from 1.6 kn to 60 kn The SCHMIDT PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities
High-current Test Probes
Technical Information Contents High-current Test Probes High-current Test Probes H-118 104 H-120 105 In the case of high-current Test Probes, the plunger is split in two sections. During the stroke movement,
Axial piston variable pump A11V(L)O series 40
xial piston variable pump 11V(L)O series 40 RE 92510 Issue: 10.2014 Replaces: 10.2013 izes 110 to 280 Nominal pressure 350 bar (5100 psi) Maximum pressure 420 bar (6100 psi) Open circuit Characteristics
Safety Shock Absorbers SDP63 to SDP160 For Crane Installations
Safety Shock Absorbers SDP63 to SDP160 or rane Installations Operating Instruction 1 SDP63-50EU SDP63-75EU SDP63-100EU SDP63-150EU SDP63-200EU SDP63-250EU SDP63-300EU SDP63-400EU SDP63-500EU SDP63-600EU
Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" How to Order. Nil. Air cushion. Both ends. Nil. None N H R. Head end Rod end 400 (4") NCA1-L400 NCA1-F400
NFPA Interchangeable Cylinder: Standard Type Double Acting, Single Rod (Medium Duty) Series NCA1 Inch size: ø1.5", ø2", ø2.5", ø3.25", ø4" Built-in magnet Nil None D W/ auto switch (Magnetic piston) Style
Ball Valves. Features
Catalog HY14-252/U Technical Information eries V3D General Description eries V3D is a 3-way diverter. The product is rated at 27 ar (3 PI) and designed to economically satisfy many 3-way applications.
BATTERIES & SUPERCAPS POST MORTEM ANALYSIS PLATFORM EXTERNAL SERVICES
BATTERIES & SUPERCAPS POST MORTEM ANALYSIS PLATFORM EXTERNAL SERVICES CONTEXT Over the last years a remarkable evolution has taken place by the introduction of new batteries & supercapacitors technologies
Axial piston variable pump A11V(L)O Series 40
xial piston variable pump 11V(L)O eries 40 RE 92510 Edition: 05.2016 Replaces: 10.2014 izes 110 to 280 Nominal pressure 350 bar (5100 psi) Maximum pressure 420 bar (6100 psi) Open circuit Features Variable
Technical data. Standards: IEC/EN thermoplastic tightening force on nut 22 mm A/F max. 300 Ncm Protection class: IP 67 to EN 60529
B /V Ø 20 0 5 60 Pg 00 22 3 Actuation from front Thermoplastic enclosure Central mounting Long life on-contacting principle Pre-wired cable available, cable length 1 m Protection class IP 6 When the switches
SCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 to 60 kn The SCHMIDT PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities
Double acting. Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous.
Double acting Standard executions Version Symbol Type Parallel from bore 25 mm. S4 On request, they can be supplied according Directive 94/9/EC - ATEX II 2 GDc T5 Options Special versions on request Suffix
Twin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
TECHNICAL CHARACTERISTICS
BE series IO 5599/ valves 5/5/3 UNIVER, particularly sensible to market requirements, has introduced in its production program a new line of valves for IO subbases. These valves are identical in dimensions
Push-in RTD Temperature Probe with Connecting Cable
Data Sheet 902150 Page 1/6 Push-in RTD Temperature Probe with Connecting Cable Temperature range from -50 to +400 C As single or double RTD temperature probe In 2-wire, 3-wire or 4-wire-circuit Connecting
G max rad Ød 2 Ød 3 ØD to to to to
Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured
Axial Piston Variable Pump A10VO
Axial Piston Variable Pump A10VO RE 92705/01.12 1/44 Replaces: 06.09 Data sheet eries 32 izes 71 to 180 Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Contents Type code for standard program
1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95
1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T
Hydraulic Diaphragm type Metering Pump
Hydraulic Diaphragm type Metering Pump For Metering Injection in Petr Hydraulic diaphragm metering pumps have both the high-pressure and high-precision features of plunger type pumps and zero liquid leakage
Traction Gas Springs GZ-15 to GZ-40 (Pull Type)
Traction Gas Springs GZ- to GZ-40 (Pull ) Industrial traction gas springs are maintenance-free and ready to install. They are available ex-stock with body diameters from to 40 and forces from N to 000
Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
Free Mount Cylinder. Series CU. A space saving air cylinder with multiple surfaces for mounting. The series consist of an array of cylinders.
Mounting Axial mounting (Body tapped) Free Mount Cylinder eries CU Double Acting ingle Rod/Double Rod ingle Acting pring Return/Extend, Non-rotating Rod ø, ø, ø1, ø, ø, ø A space saving air cylinder with
Double-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80
> Cylinders Series 50 CATALOGUE > Release 8.5 Rodless cylinders Series 50 Double-acting, magnetic, cushioned ø6, 25, 32, 40, 50, 63, 80»» Four ports on each chamber»» Possibility to supply both chambers
Design. Dynamic Sealing Face Ød1,ØD max Static Sealing Face Ød2,ØD2, L1 3.2 max 16 max 125 max 140 max
Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured
arning FILURE OR IMPROPER ELECTION OR IMPROPER UE OF THE PRODUCT ND/OR YTEM DECRIED HEREIN OR RELTED ITEM CN CUE DETH, PERONL INJURY ND PROPEY DMGE. T
Tooling Plate Extra Low Profile Pneumatic Cylinder Catalog U08-0977/N October, 00 3, 40 and 50 mm ore izes hort Overall Length Flexible Porting Industry Interchangeable Non-Rotating Capability arning FILURE
Spare parts for CK* Servocylinders
www.atos.com Table KTR-B0-20/E Spare parts for CK* Servocylinders EXPLODED VIEW OF THE CYLINDER CKF 0 3 3 35 3 37 3 3 2 2 2 0 20. Rod Cushioning adjustment screw 2 Wiper 20 Seeger 3 O-ring + Antiextrusion
Axial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 09.2017 Replaces: 02.2017 High-pressure pump for applications in a closed circuit up to 500 bar ize 110 280 Nominal pressure 450 bar Maximum pressure
Work supports - Collet-Lok design
ork supports - ollet-ok design Shown: PS-1, PTS-1 Hydraulically locked, mechanically maintained work support ollet-ok products ollet-ok design allows the work support to maintain support position after
Block feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
Metric Hydraulic Cylinders Series HMI
Series HMI Conforms to ISO 600/ (99) or working pressures up to 0 bar Vital Technologies for Motion and Control or Cylinder Division Plant Locations See Page II. 05 As the world leader in the design and
SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS
SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent
Axial piston variable pump A10V(S)O Series 31
Axial piston variable pump A10V()O eries 31 RE 92701 Edition: 06.2016 Replaces: 01.2012 ize 18 (A10VO) izes 28 to 1 (A10VO) Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features Variable
Catalog No. C12119B. Nitrogen Gas Spring Lifters. Lifters for Single-Point, Multi-Point and Rail Lift Applications
atalog No. 12119B Nitrogen Gas pring Lifters L eries Lifters for ingle-point, Multi-Point and Rail Lift Applications Nitrogen Gas Lifters Introduction High Quality onstruction The global leader in nitrogen
Block feeder SPVS Used in oil or grease lubrication systems
1-3029-EN Block feeder SPVS Used in oil or grease lubrication systems Block feeders of the SPVS series are used in grease and oil total loss lubrication systems. They are used to either increase the number
Special Order Items 8 Weeks Delivery
T ERIE TANDARD CYLINDER T B C pecial Order Items 8 Weeks Delivery TBC 50X80 B: tandard Cylinder Bore x stroke D: Double-shaft,model No. is TDC A: Double-shaft and adjustable stroke type : winging type
503 series. GENERAL Operating pressure
FEATURES rate up to 00 l/min Spool & Sleeve or rubber packed technology in the same dimension body Wide electrical connection selection : G3 or 580 Fieldbus Electronics, 25 or 37 Pin Sub-D connector, 19
Large bore size cylinder SCS2 Series
Large bore size cylinder C2 eries ew product LGE BOE IZE CYLIDE C2 EIE Large Mass eduction! 50% mass reduction by using aluminum for covers and tubes CC-1118 2 oh compliant Large Mass 50% mass reduction
Axial piston variable pump A4VG Series 40. Americas. RE-A Edition: Replaces:
Axial piston variable pump A4VG eries 40 Americas RE-A 92004 Edition: 09.2017 Replaces: 06.2012 High-pressure pump for applications in a closed circuit up to 7250 psi (500 bar) ize 110 280 Nominal pressure
Cylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
Hydraulic Cylinders CNA
Hydraulic Cylinders CNA ingle and Double-acting List of Contents Contents Page List of contents.............................................. 3 Description.................................................
Engineering & Dimensions TAKE-UP FRAMES
Engineering & imensions TAKE-UP RAME PRECIION PULLEY & ILER ALL RIGHT REERVE 2 PRECIION PULLEY & ILER ALL RIGHT REERVE TALE O CONTENT Take-Up Interchange... 4, 5 Precision Heavy uty (PH).... 6, 7 Precision
Lube, Non-lube: ø125, ø140, ø160, ø180, ø200, ø250, ø300 Air-hydro: ø125, ø140, ø160. How to Order. Bore size. 125mm 140mm 160mm
ir Cylinder/tandard eries C, : ø, ø, ø, ø, ø, ø, ø : ø, ø, ø How to Order B L F G C D T C L Mounting Foot Front flange Rear flange ingle clevis Double clevis Center trunnion JR Rod boot/cushion Rod boot
Axial piston variable pump A10VO Series 32
Axial piston variable pump A10VO eries 32 RE 92705 Edition: 06.2016 Replaces: 01.2012 Optimized medium pressure pump for powerful machines izes 45 to 180 Nominal pressure 280 bar Maximum pressure 350 bar
Class 3. High Pressure Square-Head Cylinders CLASS 3
Class High Pressure Square-Head Cylinders CLSS Options, Modifications and Ordering Information Options Bore Size Selection Unlike air applications, the output force of a cylinder for hydraulic service
Stainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
Axial Piston Variable Pump A18VLO
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics ervice Axial Piston Variable Pump A18VLO RE 92280/06.09 1/12 Replaces: 02.09 Data sheet eries 10 ize NG80 Nominal
Multi-Power Cylinders
vailable in series sizes /" thru " trokes /8" thru " Original eries (shown right) s -/8" thru " trokes /" thru " orces to,000 lbs. ( tons!) Pancake eries (see pages. to.7) s /" thru " trokes /8" thru -/"
86P40-2, 86P60-2 Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information
86P40-, 86P60- Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information Application: Accurate positioning of sheet metal parts in welding equipment and handling systems. At the
Variable vane pumps, pilot operated
Variable vane pumps, pilot operated RE 10515/10.05 Replaces: 07.02 1/30 Type V7 izes 14 to 150 eries1x Maximum operating pressure 1 bar Maximum flow 270 l/min H5641 Type 2V7/...+ GF1/... H1790 Type 2V7/16...
Axial Piston Variable Pump A18VLO Series 11
Axial Piston Variable Pump A18VLO eries 11 RE 92280 Issue: 06.2012 Replaces: 06.2009 ize 80 Nominal pressure 350 bar Maximum pressure 400 bar For commercial vehicles Open circuit Features Variable pump
Axial piston variable pump A10V(S)O Series 31. Americas. RE-A Edition: Replaces:
Axial piston variable pump A10V()O eries 31 Americas RE-A 92701 Edition: 02.2017 Replaces: 03.2012 ize 18 (A10VO) izes 28 to 140 (A10VO) Nominal pressure 4100 psi (280 bar) Maximum pressure 5100 psi (350
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.