OUTLINE DIMENSIONS HIGH PRESSURE PUMP HDF 40/40-8 1/6. High pressure pump HDF 40/40-8. HYDRAULIC FLOW l/min, max. 10. HYDRAULIC PRESSURE bar, max.
|
|
- Junior Andrews
- 5 years ago
- Views:
Transcription
1 1/6 HIGH PRESSURE PUMP HDF 40/40-8 OUTLINE DIMENSIONS HYDRAULIC FLOW l/min, max. 10 HYDRAULIC PRESSURE bar, max. 220 WATER DISCHARGE l/min, max. 40 WATER PRESSURE bar, max WEIGHT kg P T M8 4 pcs P T HYDRAULICS FLUID CONNECTIONS PUMPING FLUID pressure return outlet intake P T WP WS BSP 1/2 BSP 1/2 BSP 1/2 BSP 3/4
2 2/6 MAIN ASSEMBLY NOTE! WHEN ORDERING PARTS, UNIT'S TYPE, MODEL AND SERIAL NUMBER SHOULD BE QUOTED, TOGETHER WITH THE PART DESCRIPTION Note! The intake and discharge valve parts differs from one other. Do not mix up them when re-assembling the pump!
3 3/6 HYDRAULIC / WATER PISTON ASSEMBLY DISCHARGE & INTAKE VALVE ASSEMBLY
4 4/6 Pos STOCK DESIGNATION DETAILS QUANTITY NUMBER 1 D HPW-PUMP, ASSEMBLY HDF40/40-8 PART / COMPONENT LIST CENTRE BODY, ASSEMBLY BLOCK 55 HDF40/ SUPPRESSOR R 1/ P/T BLOCK, ASSEMBLY BODY R 1/ HF-PLUG R 1/ SEAL Included into a seal kit ALLEN SCREW M6x WATER HEAD, LEFT, ASSEMBLY HEAD BODY, LEFT STAR PLATE, SUCTION O-PLATE, DISCHARGE ALLEN SCREW M10x ALLEN SCREW M10x PLUG, SOCKET HEAD R 1/ WATER HEAD, RIGHT, ASSEMBLY HEAD BODY, RIGHT STAR PLATE, SUCTION O-PLATE, DISCHARGE ALLEN SCREW M10x ALLEN SCREW M10x PLUG, SOCKET HEAD R 1/ SEALING FLANGE ASSEMBLY HDF40/ FLANGE BODY WATER PISTON SEAL, 1T Included into a seal kit WATER PISTON SEAL, 2T Included into a seal kit FLANGE SEAL 57 Included into a seal kit CYLINDER INTAKE / DISCHARGE ASSEMBLY HDF40/ INTAKE DISCHARGE BLOCK INTAKE VALVE ASSEMBLY D WATER VALVE ASSEMBLY D PLUG, SOCKET HEAD R 1/ ALLEN SCREW M6x PISTON ASSEMBLY HYDRAULIC PISTON HYDRAULIC PISTON ROD SEAL 55, 2T Included into a seal kit REVERSAL VALVE ASSEMBLY VALVE SPOOL VALVE SEAT REVERSAL VALVE GUIDE SEAL, 2T M18/13 Excluded from seal kit WATER PISTON ASSEMBLY HDF40/ WATER PISTON O-RING SEAL SUPPORT DISK HPW WASHER 14x28-2, NUT M CYLINDER LINER SEAL 57 Included into a seal kit PRESSURE GAUGE, COMPLETE D63, 60 bar, 1/ HOSE COUPLING 25-R3/ RUBBER CUSHION 40/30-M8 4
5 5/6 SEAL AND SPARE PART KITS SEAL KIT V SEAL WATER PISTON SEAL, 1T Included into a seal kit WATER PISTON SEAL, 2T Included into a seal kit FLANGE SEAL 57 Included into a seal kit O-RING 30 Included into a seal kit SEAL 55, 2T Included into a seal kit O-RING SEAL SEAL 57 1 INTAKE / DISCHARGE VALVE KIT V DISCHARGE VALVE ASSY D O-RING WATER VALVE ASSEMBLY D30 2 SCREW KIT V SCREW M6x ALLEN SCREW M10x ALLEN SCREW M6x
6 6/6 TECHNICAL CHARACTERISTICS PARAMETERS HDF 40/40-8 WATER POWER WATER FLOW max l/min 40 WATER PRESSURE max bar 40 WATER TEMPERATURE max ºC 50 ºC PUMPING POWER max kw 2,6 SUCTION HEAD max m 3 WATER FEED PRESSURE min-max bar -0, PRESSURE RATIO water/hydraulic 1/5 MAX SPEED 1/min 120 WATER PISTONS outer diameter mm D78 WATER CONNECTIONS PRESSURE LINE BSP 1/2 SUCTION / FEED LINE BSP 3/4 PRESSURE HOSE recommendation 1/2 SUCTION HOSE recommendation 3/4 WATER FILTER min. mesh 80 HYDRAULIC CONNECTIONS PRESSURE LINE P BSP 1/2 RETURN LINE T BSP 1/2 SERVICE LINE S BSP 1/4 HYDRAULIC FLUID REQUIREMENTS VISCOSITY cst / optimal TEMPERATURE ºC max. 80 FILTER RATIO recommendation um min. 25 COOLING CAPACITY recommendation kw 0,5 HYDRAULIC POWER REQUIREMENTS HYDRAULIC FLUID FLOW l/min 8 OPERATING PRESSURE Δp bar 200 MAXIMUM PRESSURE bar 220 IDLE RUN PRESSURE bar 10 RETURN LINE PRESSURE max bar 40 WEIGHT kg 8 PRESSURE GAUGE OPTIONAL WATER PRESSURE UNLOADER ST OPTIONAL LS-VALVE LS OPTIONAL
September 2012 JLe HIGH PRESSURE PUMP HPW 1600/ (LS)
1 HIGH PRESSURE PUMP HPW 1600/15-140 September 2012 JLe OUTLINE DIMENSIONS WP P T S 1 3 S 150 Ø 8.0 30 90 155 405 155 195 5 30 40 M 10 4 pcs. HYDRAULIC FLOW l/min, max. 140 FLUID CONNECTIONS HYDRAULIC
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
1 Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive even in hard environment. Small size, light weight, durable construction
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
1 SPECIFICATIONS AND OUTLINE DIMENSIONS HIGH PRESSURE PUMP HPW 200/30-45 245 1 Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
/7 May 05 JAS Dynaset HPW pump gives great waterpower with the best power to weight ratio in the World. Small size, lightweight, outstanding durable construction with ingenious piston-to-piston action
More informationOUTLINE DIMENSIONS HIGH PRESSURE PUMP HPW 220/50-70 HIGH PRESSURE PUMP HPW 220/50-70-PA
1/6 February 2014 JLe OUTLINE DIMENION Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive even in hard environment. mall size,
More informationHVB HYDRAULIC VIBRA PUMPS
1 HV HYDRULIC VIR PUMPS Dynaset HV Vibra Pump improves significantly standard bucket vibration and soil penetration. This value-added feature reduces working time and saves machinery expenses. HV350/ 9-40
More informationMODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D E kg l HK 450/ x ,9
1 Dynaset HK hydraulic compressor gives high quality, efficient compressed air to different kinds of applications; pneumatic tools, air flushing, tire filling, cleaning, etc. Compact hydraulic air compressor
More informationMODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D E kg l HK 450/ x ,9
1 Dynaset HK hydraulic compressor gives high quality, efficient compressed air to different kinds of applications; pneumatic tools, air flushing, tire filling, cleaning, etc. Compact hydraulic air compressor
More informationDATA SHEET HYDRAULIC DRILLING FLUID PUMP HDF 180 /23-35 HDF 200 /40-55 HDF 200 / HDF 40 /40-8 HDF 90 / HDF 160 / rev 1.
rev 1.0 HYDRAULIC DRILLING FLUID PUMP HDF 40 /40-8 HDF 90 /150-85 HDF 160 /70-90 HDF 180 /23-35 HDF 200 /40-55 HDF 200 /250-280 HYDRAULIC DRILLING FLUID PUMP DYNASET HDF hydraulic drilling fluid pump transforms
More informationOUTLINE DIMENSIONS Ø D C A L B W HYDRAULIC- AND COMPRESSED AIR PORTS. December 2012 HKL HYDRAULIC COMPRESSORS HKL 4100/8-113-O-PE
December 0 HKL 00/--O-PE OUTLINE DIMENSIONS H B W A L Ø D C MODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D kg l HKL 00/ - 0 0 0 0 0 HYDRAULIC- AND COMPRESSED AIR PORTS AP P T MODEL HYDRAULIC PORTS
More informationFILLING AND CHECK VALVE
Filling valves characteristics Size Max. Flow (l/min.) R-114 DN-32 160 Max. Press. Opening ratio 3.6:1 Decompr. ratio Min pilot pressure Max pilot pressure Min. suction opening pressure Pilot volume (cm
More informationACF5. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer ACF GB
ACF5 Std Line Product Description Flow volume: 310-2900 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The ACF pumps are used
More informationRV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with
More informationHP3V SERIES. Swash-plate Type Axial Piston Variable Displacement Pump
1 /32 HP3V SERIES Swash-plate Type Axial Piston Variable Displacement Pump Hengli swash-plate axial piston pump HP3V, the key parts of the pump are made of imported materials, quality strictly controlled,
More informationInstallation, User and Service Manual. Filter Unit WP1-B2-200
Installation, User and Service Manual Filter Unit WP1-B2-200 Disclaimer: All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form or by any means, without
More informationNDJ Series New DAIPACK
DJ Series ew DIPK omenclature DJ - - 0-4 6 7 Model o. DJ: ew DIPK Pump capacity 8: V 8 used ( 8 cm /rev) : V used (4.8 cm /rev) Pressure adjustment range 9: 0.8 to. MPa {8 to kgf/cm } : 0.8 to 7 MPa {8
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More informationInternet For latest information, PDF catalogs and operation manuals
DJ Series ew DIPK omenclature Features DJ - - 0-4 6 7 Low noise The tank contains the pump and motor inside and functions itself as noise insulation panels to trap noise internally. Low oil temperature
More informationACD6. Std Line. Product Description. Max differential pressure: 7 bar Circulation, lubrication and transfer ACD GB
ACD6 Std Line Product Description Flow volume: 10-42 l/min Max differential pressure: 7 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The ACD pumps come in two
More informationFeed Pumps FZP / MFZP
eed Pumps ZP / MZP Symbol General The feed pump from the ZP series is a vane pump for the low-pressure range with constant flow rate. Product eatures l irect drive pump no bell housing or coupling required
More informationACF5. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer
ACF5 Std Line Product Description Flow volume: 310-2900 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer ALSO VALID FOR PUMP SERIES UCF Generation 5 1. Applications
More informationTruck Hydraulics. Serie VP1 Variable Displacement Pumps
ruck Hydraulics Variable Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Pump and line
More informationNo. Description No. Descreption
1 Handle Bar 14 Hex. Bolt with Flanged Face M6x25 2 Throttle Body 15 Hex. Bolt with Flanged Face M6x20 3 Plastic Piece for Throttle Cable 16 Adjusting Screw 4 Upper Throttle Body Housing 17 Tightening
More information" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller
More informationLPE4. OptiLine. Product Description. Max differential pressure: 16 bar LPE GB
LPE4 OptiLine Product Description Flow volume: 8-175 l/min Max differential pressure: 16 bar Applications: Circulation and transfer 1. Applications 1.1 Functionality The LPE OptiLine pump is used for a
More information3 Inch Water Pump. SP-UG300. Owner s Manual
Owner s Manual 3 Inch Water Pump SP-UG300 WARNING! To Reduce The Risk Of Injury, User Must Read And Understand Instruction Manual. www.steele-products.com CONTENTS SPECIFICATIONS... IMPORTANT SAFETY INFORMATION...
More informationLPE3. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer LPE GB
LPE3 Std Line Product Description Flow volume: 10-180 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The Std Line (standard)
More informationModel KD 710 KD 712 KD 714 Spare Parts List
Model KD 710 KD 712 KD 714 Spare Parts List Part No. KD1570063 From Serial No. CONTENTS Page No.. Contents... 2 Ordering Replacement parts... 3 Axle & Wheel... 4 Auger & Transmission... 6 2 Speed Gearbox...
More information2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
More informationA member of the Interpump Group
FEATURES Nickel-plated cast manifold manufactured like heavy-duty pump line Triplex Plunger Pump, Gas New generation seal package New dust protection chamber TRIPLEX TRIPLEX Solid ceramic plungers New
More informationHYDRAULIC POWERED SINGLE AND DUAL CIRCUITS BRAKING VALVE TYPE COMPACT S6
HYDRAULIC POWERED SINGLE AND DUAL CIRCUITS BRAKING VALVE TYPE COMPACT S6 S.p.A. SVILUPPO APPLICAZION FRENI INDUSTRIALI BRAKE SYSTEM SAFIM S6 03 00.01 500A-0003A-EN APPLICATION FIELDS TYRED LOADERS EXCAVATORS
More informationFlow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer
Screw pump Series LPD Product description Flow volume: 2-24 l/min Max differential pressure: 10 bar Applications: Lubrication, circulation and transfer The LPD pump is used for a number of different fluids:
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationRSP 7-06 R S P FUNCTIONAL DESCRIPTION ORDERING CODE. DIRECTIONAL CONTROL VALVES KE /13 D n 06 p max 32 MPa Q max 80 dm 3 /min
DIRECTIONAL CONTROL VALVES KE 2053 07/13 D n 06 p max 32 MPa Q max 80 dm 3 /min Manually operated directional control valves of type RSP7 06 operated by hand lever are used to control start, stop and direction
More informationVM / VML COMPONENT PARTS CATALOGUE
VM / VML REFRIGERATION COMPRESSOR COMPONENT PARTS CATALOGUE Ver. 2002 HASEGAWA CONTENTS Model VM / VML Compressor Description Parts # Crankcase Component Parts External Casing Fittings Covers & Gaskets
More informationSpare parts for SMC & TSMC 108 Mk3 Type S-L and E
00.0 Spare parts for 04-06- & T Mk3 Type S-L and E Relevant drawings for compressor 00 Mk 3, S-L-E (delivered after 89.0) Cylinder liner ect. - T 04, 06, Mk 3 (after 89.0) 00 Mk 3 Cylinder liner ect. -
More informationPUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar
/7 ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More informationcrankshaft, magneto side, there is a square profile serving as drive for the oil pump.
General: As of engine serial no. 4,103.549 a subsequent installation of an oil pump is possible. In the crankshaft, magneto side, there is a square profile serving as drive for the oil pump. As a principle:
More information2.3 MEDIUM HEAVY DUTY SERIES
2 2.3 MEDIUM HEAVY DUTY SERIES CONTENTS PPV11 Ordering Code 2.3.1 Medium Heavy Duty Series 2.3.2 Torque limiter settings Technical Information 2.3.3 Specifications 2.3.4 Hydraulic fluids 2.3.5 Viscosity
More informationYork J Model Compressors Unloading Characteristics Styles A-F Solenoid Valve
Styles A-F Solenoid Valve Loaded - De-energized Crankcase Access Cover Oil Pressure Supply Oil Supply Valve Spring, Washer/Keeper Valve Rod and Disk To Unloading Cylinder Plunger Plunger Disk Crankcase
More informationHYDRAULIC BREAKER HAMMER HB 50 J HAMMER HB 50 L HAMMER HB 50 U
PARTS MANUAL ver. 1.1 PMHB50ENG.051011 HYDRAULIC BREAKER HB 50 J HB 50 L HB 50 U Serial No. TRK500005-UP TRK510005-UP TRK520005-UP TABLE OF CONTENTS 1. Housing unit 50J... 4 2. Housing unit 50L... 6 3.
More informationACG7. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer ACG GB
ACG7 Std Line Product Description Flow volume: 80-1200 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The Std Line (standard)
More informationMAINTENANCE MANUAL YAMADA AIR-OPERATED DIAPHRAGM PUMPS NDP-10 WARNING
MAINTENANCE MANUAL Doc. No NDP10 English - 02 Revised January 2007 YAMADA AIR-OPERATED DIAPHRAGM PUMPS NDP-10 WARNING For your own safety, be sure to read these procedures carefully before performing maintenance
More informationMASTER PRIORITY & TWO-PUMPS-COMBINING VALVE
TWO-PUMPS-COMBINING SVILUPPO APPLICAZION FRENI INDUSTRIALI TWO-PUMPS-COMBINING -- 00.01 MASTER & TWO-PUMPS-COMBINING FUNCTIONING: Two pumps supply oil to the valve. Steering unit of load sensing type is
More information3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical
More informationTruck Hydraulics Auxiliary valves. Technical Information Ordering information and Drawings...60
Index Auxiliary Valves Bypass Valves and Unloading Valves for F1, F2, T1 and VP1 pumps Contents Page BPV-F1 and BPV-T1 bypass...59...59 Ordering information and Drawings...60 BPV-F1 and BPV-T1 Bypass without
More informationBW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
More informationSpare parts manual. HPC 100 Mk4 Reciprocating compressor unit
Spare parts manual en HPC 100 Mk4 Reciprocating compressor unit Spare parts manual for HPC Mk4 The reciprocating compressor and the unit may be fitted with different equipment, depending on their functions
More informationLMP series
Low & Medium Pressure fi lters LMP 95-95-95 series Maximum working pressure up to.5 MPa (5 bar) - Flow rate up to 000 l/min 7 Low & Medium Pressure filters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationMODELS JG43, JG63, JG83 JG44, JG64, JG84
MODEL J STYLE G HERMETIC COMPRESSORS RENEWAL PARTS Supersedes: 180.23-RP4 (695) Form 180.23-RP4 (1298) MODELS JG43, JG63, JG83 JG44, JG64, JG84 (See Page 2 for Complete Model Nomenclature) 27531A UNIT
More informationSpare parts manual. HPC100Mk4LL Reciprocating compressor unit
Spare parts manual en HPC100Mk4LL Reciprocating compressor unit Manual for HPC 100 Mk 4 LL Manual for HPC 100 Mk 4 LL Compressor type HPC 104 106 108 Compressor no. Refrigerant R717 R410A R744 Other Control
More informationDATA SHEETS TABLE OF CONTENTS
TABL OF CONTNTS 3kW-220VDC-21 6kW-220VDC-34 10kW-220VDC-49 12kW-220VDC-59 15kW-220VDC-65 20kW-220VDC-86 30kW-220VDC-120 40kW-220VDC-165 Click the models to navigate the Data sheets. S HYDRAULIC MAGNT GNRATOR
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More informationrev 3_01/04/17 EY2650H25H ME-246.4
ME-246.4 1 Cutting Attachment, Bar, Chain A09 A08 A10 30 33 28 32 34 31 14 18 2 25 13 24 11 20 3 5 12 17 16 26 19 21 27 22 23 1 4 7 8 9 10 2 1 Cutting Attachment, Bar, Chain 1 1 XTM0000001 GEAR CASE A
More informationSpare parts manual. HPX700Mk5 Reciprocating compressor unit
Spare parts manual 700Mk5 Reciprocating compressor unit Manual for Mk 5 Manual for Mk 5 Compressor type 704 706 708 72 76 Compressor no. Refrigerant R77 R744 Other Control Unisab III None Other Water-cooled
More informationPARTS BREAKDOWN
Component Item Description 511224 Air Filter To Suit 596165 Toolex Chainsaw 511220 Walbro Carburettor To Suit Toolex Chainsaw 596165 511221 Starter Assembly Complete Suit Toolex Chanisaw 596165 511223
More informationPVD /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE
14 100/117 ED PVD VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with mechanical pressure compensator. The pressure
More informationSpare parts manual. HPO Reciprocating compressor unit
Spare parts manual en HPO 24-26-28 Reciprocating compressor unit Manual for HPO 24-26-28 Compressor type 24 26 28 Compressor no. Refrigerant R717 R410A R744 Other Control Unisab III None Other Water-cooled
More informationFeed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
More informationrev 8_04/02/18 EY2650H25H ME-246.4
ME-246.4 , ME-246.4 1 Cutting Attachment, Bar, Chain A09 A08 A10 30 33 28 32 34 31 14 18 2 25 13 24 11 20 3 5 12 17 16 26 19 21 27 22 23 1 4 7 8 9 10 2 , ME-246.4 1 Cutting Attachment, Bar, Chain 1 1 XTM0000001
More informationMAINTENANCE MANUAL YAMADA AIR-OPERATED DIAPHRAGM PUMPS NDP-40 NDP-50 NDP-80
MAINTENANCE MANUAL Doc No NDP40/50/80English - 02 Revised August 2008 YAMADA AIR-OPERATED DIAPHRAGM PUMPS NDP-40 NDP-50 NDP-80 WARNING For your own safety, be sure to read these procedures carefully before
More informationrev 6_09/23/14 EK7651H EK7651HD
D , D 1 Fuel Tank, Handle 258 3 4 7 6 5 2 1 8 9 10 11 13 15 14 12 26 25 27 23 24 20 19 18 17 16 39 38 28 29 22 21 259 41 40 37 36 35 270 32 31 30 34 33 44 46 45 43 48 47 42 50 49 52 51 2 , D 1 Fuel Tank,
More informationXS VALVES WITH UM ELECTRIC ACTUATOR
780-781XS VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 780XS+UM L-port and 781 XS+UM T-port stainless steel 3-way ball valves are dedicated to the mixing, diverting or automatic discharging of
More informationStandard Accessories for HA
MODEL HA06-322 HA06-322 É 26.5 200 324. Specifications Model HA06-322 38 Max. Throat Depth Punching Capacity (for Mild Steel) Diameter Thickness 2-3/8" (60) 7/8" (22) /2" (3) 76 2 50.5 83 30 4.5 24 60.
More informationHigh Pressure Paint Pumps
imum Durability, Versatility and Ease of use... Binks MX Pumps are a completely new design in pump technology utilising patented magnetic detents to dramatically enhance smooth pump operation and change-over
More informationMULTILUBE SYSTEM INSTALLATION AND MAINTENANCE
MULTILUBE SYSTEM TABLE OF CONTENTS 1 PUMPING UNIT INSTALLATION...1 1.1 Installing the supporting blocks and the pumping unit...1 1.2 Installing the main line on the pumping unit...3 1.3 Installing the
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Pump unit GMZ-E
Pump unit GMZ-E Pump used to supply oil and grease from a barrel directly through a lid-hole or a bunghole. Technical data: Pump with bung-hole Pump with barrel lid Delivery volume per stroke: Pump element
More informationMULTIGO. EBARA Pumps Europe S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 40 203 PERFORMANCE CURVES 80 204 - CONSTRUCTIONS SECTIONAL VIEW
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationSpare part list DEPA Pulsationdampener Series P
: PD25-80-P 25.26 Air chamber, SS 316L 25 All 1 251501-13 40.26 Air chamber, SS 316L 40 All 1 401501-13 50.26 Air chamber, SS 316L 50 All 1 501501-13 80.26 Air chamber, steel 80 All 1 801501-13 25.27 Clamp
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
More informationWe recommend that when you need spare parts, you should use only original parts.
Tanco Auto wrap 1300 SPARE PARTS LIST We recommend that when you need spare parts, you should use only original parts. When ordering spare Parts use the following: - Drawings are marked with a position
More informationHYDRAULIC MOTORS EPRM
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS
More information3.3 VARIABLE DISPLACEMENT MECHANICAL COMPENSATION
. VRIBL ISPLMNT MHNIL OMPNSTION ONTNTS PVV101 Ordering ode..1 Mechanical compensation Technical Information..2 Specifications.. Hydraulic fluids..4 Viscosity range..5 Temperature range..6 Seals..7 Filtration..8
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 ITEM QUANTITY FOR MODEL 302 INTERMEDIATE CASING WITH BEARING POSITION 303
SPECIFICATIONS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY 203 PERFORMANCE CHART 2 204 PERFORMANCE CHART 4 205 PERFORMANCE CHART 7 206 PERFORMANCE CHART 15 207 - CONSTRUCTIONS
More informationFHF325 series. Filter housing according to SAE J2066 for HF4 filter elements. High Pressure fi lters
High Pressure fi lters FHF5 series Maximum pressure up to 50 bar Flow rate up to 500 l/min housing according to SAE J066 for HF filter s 95 High Pressure fi lters FILTER SIZING The correct filter sizing
More informationRADIAL PISTON MOTORS TECHNICAL DATA HRS2. Max. cont. speed. Specific torque. Recommended flushing flow. Displacement. Min. speed.
A/200/ MAX. 195 3,1 750 3 250 275 350 36 45 89,5 84,5 8 26 A/200/69 MIN. 69 1,1 850 5 250 275 350 24 30 85,5 78 8 26 A/200/75 MIN. 75 1,2 800 5 250 275 350 26 32,5 87 81 8 26 A/200/95 MIN. 95 1,5 775 4
More informationHYDRAULIC HAMMER SANDVIK BR 522 STD
Original instructions 6/07 PARTS MANUAL PMBR522SENG.607 HYDRAULIC HAMMER SANDVIK BR 522 STD Serial No. 22180275-UP TABLE OF CONTENTS 1. Housing unit............................................................
More information4 Stroke Diesel. Oil type SAE 15 W40/E 3
MARCH 2006 TECHNICAL DATA 2.33 GENERAL SPECIFICATIONS Cycle Air supply Injection 4 Stroke Diesel naturally aspirated direct Number of cylinders 4 in line 6 in line Bore mm 104 Stroke mm 132 Total displacement
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More information"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22-FR01
"AR" SERIES Variable Displacement-Single Pumps Compensator Type, / AR-FR1 Up to 1 MPa ( PSI),. cm /rev ( CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj. Screw
More informationEMTEC -C PUMPS FOR HIGH PRESSURE COOLANT SUPPLY
CAPABILITIES EMTEC -C PUMPS FOR HIGH PRESSURE COOLANT SUPPLY BRINGING NEXT LEVEL PERFORMANCE TO COOLANT PUMPS ALLWEILER 2 3 PUMP LIFE INTO YOUR MOST CRITICAL EQUIPMENT COOLANT PUMPS CAN SIGNIFICANTLY EXTEND
More informationLB361B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-031 2011/06 LB361B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 793099 Top End Repair Kit 793229 Includes Piston Rings & Expanders, Packing
More information"AR" SERIES PISTON PUMPS. Variable Displacement-Single Pumps Pressure Compensator Type,AR16 / AR22- FR01 3
"AR" SERIES Variable Displacement-Single Pumps Compensator Type,AR / AR- FR Up to MPa ( PSI),. cm /rev (.5 CU.IN./rev) Pub. EC- A Compensator Valve Adj. Screw Spool Control Piston Drain Port Flow Adj.
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2018 Replaces: 03.2016 Technical data Description
More informationInstallation manual. Cooling system. Industrial engines DC09, DC13, DC16 OC16. 01:05 Issue 12 en-gb. Scania CV AB 2018, Sweden
Installation manual Cooling system Industrial engines DC0, DC13, DC OC 333 3 01:05 Issue en-gb Changes from the previous issue...3 Design and dimensioning...3 Expansion tank...4 and earlier emission levels...
More informationPost-Compensated Proportional Valve CV2000LS
www.nimco-controls.com Post-Compensated Proportional Valve CV2000LS Smart Solutions... for the Future Contents Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16
More informationSpare part list DEPA Air Operated Diaphragm Pumps L
: DL25-80-SUV/UEV Drawing-No.: 1300-1014 25.01 Air valve, internal 25-40 All 1 2501053-- 50.01 Air valve, internal 50-80 All 1 5001052-- 25.01V Air valve, internal, nickel plated 25-40 All 1 250105399
More informationHorizontal And Vertical Centrifugal Pumps
Horizontal And Vertical Centrifugal Pumps Lip Bellow Type JP-840 Series Horizontal Centrifugal Pumps are driven by a direct-coupled motor (maximum 3,000 rpm). They are especially suitable for the rapid
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationIGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
More information4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
More informationStanley MB/XP2015. HYDRAULIC BREAKER Parts Manual. Part Number PMMB/XP2015XENG.B17
Stanley MB/XP2015 HYDRAULIC BREAKER Parts Manual Part Number PMMB/XP2015XENG.B17 Contents Housing Unit...4 Accumulator...6 Main Valve...7 Pressure Control Valve...8 Tie Rods...10 Body Parts...11 Front
More information- BPV-F1-25 and BPV-F BPV-F1/-T BPV-T BPV-L, line mounted BPV-VP
Auxiliary Valves Auxiliary s Bypass Valves for F1, F2, 1 and VP1 pumps Contents Page Bypass : - BPV-F1-25 and -81...40 - BPV-F2... 41 - BPV-F1/-1... 42 - BPV-1... 43 - BPV-L, line mounted...44 - BPV-VP1...
More informationAXIAL PISTON MOTORS SHMF
SECTIONAL VIEW Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output shaft Valve block Shuttle valve Swashplate 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working
More information