SPECIFICATIONS AND OUTLINE DIMENSIONS
|
|
- Reginald Terry
- 6 years ago
- Views:
Transcription
1 /7 May 05 JAS Dynaset HPW pump gives great waterpower with the best power to weight ratio in the World. Small size, lightweight, outstanding durable construction with ingenious piston-to-piston action and low water consumption make the hydraulic high-pressure water pump very cost effective. Applications: abrasive power washing, street-cleaning, water cutting, hydro demolition and scaling, water hydraulics, robotic washing, pressure testing, offshore and underwater works, etc. SPECIFICATIONS AND OUTLINE DIMENSIONS CMP l/min,. HYDRAULIC PRESSURE,. WATER FLOW l/min,. 00 WATER PRESSURE,. 00 kg 70 WEIGHT T P HYDRAULIC FLOW mm (/0 ) WP S 9 75 pcs. Ø FLUID CONNECTIONS HYDRAULIC PORTS pressure P return T PUMPING FLUID PORTS pressure WP SAE 6000 SAE 6000 SAE 6000 / / / intake S* SAE 000 WMP BSP / * Note: Suction hose
2 NOTE! WHEN ORDERING SPARE PARTS, UNIT'S TYPE, MODEL AND SERIAL SHOULD BE QUOTED Note! The pressure valve s spring is shorter and of considerably bigger deflection rate than the suction valve s one. Do not mix up the valves when re-assembling the pump! /7 May 05 JAS BASIC ASSEMBLY
3 May 05 JAS /7 BASIC ASSEMBLY WATER INTAKE VALVE WATER DISCHARGE VALVE OIL AND WATER SEALS
4 May 05 JAS /7 PART LIST HPW-PUMP, ASSEMBLY CENTRE BODY ASSEMBLY CENTRE BODY WATER HEAD SEAL 5 HPW00/00- D INTAKE VALVE, ASSEMBLY VALVE CAP 0 O-RING 75 SPRING, SUCTION INTAKE VALVE HOUSING INTAKE MANIFOLD DISCHARGE MANIFOLD PRESSURE PIPE O-RING PACKING SLEEVE BRACKET RUBBER CUSHION H-W PISTON ASSEMBLY HYDRAULIC PISTON WATER PISTON REVERSAL VALVE GUIDE 57 SEAL 50 SEAL 57 REVERSAL VALVE SPOOL REVERSAL SET SCREW H T M50 M6x0 PLUG R/ Mx70, 0 Nm Mx0, 00 Nm M6x0, 0 Nm M6x00, 50 Nm SLEEVE, EXTRA WIDE O-RING 7 Mx0 Mx0 5x,5-0 A.5x Mx60 Ax A.x O-RING 0 SUPPORT RING DISCHARGE VALVE, ASSEMBLY VALVE CAP 5 SPRING, PRESSURE O-RING O-RING SEAL DISC, ASSEMBLY SEAL DISC SEAL 5 SEAL 5 O-RING SLIDER BEARING SEAL SUPPORT RING O-RING 00 Nm T T M6x75 00 Nm
5 May 05 JAS 5/7 REPAIR KITS SEAL KIT V SEAL 5 O-RING 75 O-RING SEAL 50 O-RING 7 O-RING 5 O-RING 5 SEAL 5 SEAL 5 O-RING O-RING T T T WATER VALVE KIT V INTAKE VALVE, ASSEMBLY VALVE CAP 0 O-RING 75 SPRING, SUCTION O-RING DISCHARGE VALVE, ASSEMBLY VALVE CAP 5 SPRING, PRESSURE O-RING O-RING 5
6 May 05 JAS 6/7 REPAIR KITS SCREW KIT V SLEEVE, EXTRA WIDE Mx70, 0 Nm Mx0, 00 Nm M6x0, 0 Nm M6x00, 50 Nm Mx0 Mx0 5x,5-0 A.5x Mx60 Ax A.x6 M6x75 00 Nm WATER PISTON KIT V WATER PISTON REVERSAL VALVE GUIDE 57 SEAL Nm
7 May 05 JAS 7/7 TECHNICAL SPECIFICATIONS PARAMETERS WATER POWER WATER FLOW WATER PRESSURE WATER TEMPERATURE PUMPING POWER SUCTION HEAD WATER FEED PRESSURE PRESSURE RATIO SPEED RATIO WATER PISTONS HPW 00/00- min- water/hydraulic outer diameter WATER CONNECTIONS PRESSURE LINE SUCTION / FEED LINE PRESSURE HOSE SUCTION HOSE WATER FILTER min. l/min ºC kw m /min mm ºC 50-0,...0,06 0 D 5 SAE 6000 SAE mesh = 77µm HYDRAULIC CONNECTIONS PRESSURE LINE RETURN LINE SERVICE LINE P T CMP SAE 6000 / SAE 6000 / BSP / cst ºC um kw 0-00 / optimal /7/ min. 0 0 HYDRAULIC POWER REQUIREMENTS HYDRAULIC FLUID FLOW OPERATING PRESSURE Δp MAXIMUM PRESSURE IDLE RUN PRESSURE RETURN LINE PRESSURE l/min 0 WEIGHT kg 70 HYDRAULIC FLUID REQUIREMENTS VISCOSITY TEMPERATURE OIL PURITY according to ISO 06 FILTER RATIO COOLING CAPACITY PRESSURE GAUGE WATER PRESSURE UNLOADER LS-VALVE LS OPTIONAL NOT AVAILABLE OPTIONAL
OUTLINE DIMENSIONS HIGH PRESSURE PUMP HDF 40/40-8 1/6. High pressure pump HDF 40/40-8. HYDRAULIC FLOW l/min, max. 10. HYDRAULIC PRESSURE bar, max.
1/6 HIGH PRESSURE PUMP HDF 40/40-8 OUTLINE DIMENSIONS HYDRAULIC FLOW l/min, max. 10 HYDRAULIC PRESSURE bar, max. 220 WATER DISCHARGE l/min, max. 40 WATER PRESSURE bar, max 40 3 4 WEIGHT kg 8 315 P T 1
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
1 Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive even in hard environment. Small size, light weight, durable construction
More informationSPECIFICATIONS AND OUTLINE DIMENSIONS
1 SPECIFICATIONS AND OUTLINE DIMENSIONS HIGH PRESSURE PUMP HPW 200/30-45 245 1 Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive
More informationSeptember 2012 JLe HIGH PRESSURE PUMP HPW 1600/ (LS)
1 HIGH PRESSURE PUMP HPW 1600/15-140 September 2012 JLe OUTLINE DIMENSIONS WP P T S 1 3 S 150 Ø 8.0 30 90 155 405 155 195 5 30 40 M 10 4 pcs. HYDRAULIC FLOW l/min, max. 140 FLUID CONNECTIONS HYDRAULIC
More informationOUTLINE DIMENSIONS HIGH PRESSURE PUMP HPW 220/50-70 HIGH PRESSURE PUMP HPW 220/50-70-PA
1/6 February 2014 JLe OUTLINE DIMENION Dynaset HPW pump gives great water power with small amount of water in relation to its size. As self-priming it is productive even in hard environment. mall size,
More informationDATA SHEET HYDRAULIC DRILLING FLUID PUMP HDF 180 /23-35 HDF 200 /40-55 HDF 200 / HDF 40 /40-8 HDF 90 / HDF 160 / rev 1.
rev 1.0 HYDRAULIC DRILLING FLUID PUMP HDF 40 /40-8 HDF 90 /150-85 HDF 160 /70-90 HDF 180 /23-35 HDF 200 /40-55 HDF 200 /250-280 HYDRAULIC DRILLING FLUID PUMP DYNASET HDF hydraulic drilling fluid pump transforms
More informationMODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D E kg l HK 450/ x ,9
1 Dynaset HK hydraulic compressor gives high quality, efficient compressed air to different kinds of applications; pneumatic tools, air flushing, tire filling, cleaning, etc. Compact hydraulic air compressor
More informationHVB HYDRAULIC VIBRA PUMPS
1 HV HYDRULIC VIR PUMPS Dynaset HV Vibra Pump improves significantly standard bucket vibration and soil penetration. This value-added feature reduces working time and saves machinery expenses. HV350/ 9-40
More informationMODEL DIMENSIONS, mm WEIGHT OIL FILL L W H A B C D E kg l HK 450/ x ,9
1 Dynaset HK hydraulic compressor gives high quality, efficient compressed air to different kinds of applications; pneumatic tools, air flushing, tire filling, cleaning, etc. Compact hydraulic air compressor
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationA member of the Interpump Group
FEATURES Nickel-plated cast manifold manufactured like heavy-duty pump line Triplex Plunger Pump, Gas New generation seal package New dust protection chamber TRIPLEX TRIPLEX Solid ceramic plungers New
More informationDATA SHEETS TABLE OF CONTENTS
TABL OF CONTNTS 3kW-220VDC-21 6kW-220VDC-34 10kW-220VDC-49 12kW-220VDC-59 15kW-220VDC-65 20kW-220VDC-86 30kW-220VDC-120 40kW-220VDC-165 Click the models to navigate the Data sheets. S HYDRAULIC MAGNT GNRATOR
More informationFILLING AND CHECK VALVE
Filling valves characteristics Size Max. Flow (l/min.) R-114 DN-32 160 Max. Press. Opening ratio 3.6:1 Decompr. ratio Min pilot pressure Max pilot pressure Min. suction opening pressure Pilot volume (cm
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationTruck Hydraulics. Serie VP1 Variable Displacement Pumps
ruck Hydraulics Variable Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Pump and line
More informationAXIAL PISTON MOTORS SHMF
SECTIONAL VIEW Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output shaft Valve block Shuttle valve Swashplate 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working
More informationEMTEC -C PUMPS FOR HIGH PRESSURE COOLANT SUPPLY
CAPABILITIES EMTEC -C PUMPS FOR HIGH PRESSURE COOLANT SUPPLY BRINGING NEXT LEVEL PERFORMANCE TO COOLANT PUMPS ALLWEILER 2 3 PUMP LIFE INTO YOUR MOST CRITICAL EQUIPMENT COOLANT PUMPS CAN SIGNIFICANTLY EXTEND
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More information3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow A-VRFC3C-VEI-VS-LS 0M.43.21.80 - Y - Z RE 18309-63 Edition: 03.2018 Replaces: 03.2016 Technical
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
More informationBW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
More information2.3 MEDIUM HEAVY DUTY SERIES
2 2.3 MEDIUM HEAVY DUTY SERIES CONTENTS PPV11 Ordering Code 2.3.1 Medium Heavy Duty Series 2.3.2 Torque limiter settings Technical Information 2.3.3 Specifications 2.3.4 Hydraulic fluids 2.3.5 Viscosity
More information2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
More informationIPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More informationPVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationAxial Piston Variable Pump A2VK
Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents
More informationFHF325 series. Filter housing according to SAE J2066 for HF4 filter elements. High Pressure fi lters
High Pressure fi lters FHF5 series Maximum pressure up to 50 bar Flow rate up to 500 l/min housing according to SAE J066 for HF filter s 95 High Pressure fi lters FILTER SIZING The correct filter sizing
More informationDATA SHEET HIGH PRESSURE STREET WASHING UNITS KPL L 220 KPL XL 180 KPL XL 220 KPL S 200 KPL M 200 KPL L 200. rev 1.0
rev 1.0 HIGH PRESSURE STREET WASHING UNITS KPL S 200 KPL M 200 KPL L 200 KPL L 220 KPL XL 180 KPL XL 220 HIGH PRESSURE STREET WASHING UNIT HIGH PRESSURE STREET WASHING UNITS DYNASET KPL High Pressure Street
More informationHYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationPUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar
/7 ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More informationIPCA Medium-pressure Internal Gear Pumps Technical Data Sheet
IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet Design and Function 1 7 6 5 9 2 6 5 7 8 2 1 4a 4b 3 1 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationMONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
More informationHydraulic Pump Series VP1 Variable Displacement
Variable Displacement Catalog 9129 8222-02 February 1999, GB Content Page General information 3 Design 3 Specifications 4 Ordering information 4 VP1 cross section 4 Installation dimensions 5 Line dimensioning
More informationInstallation, User and Service Manual. Filter Unit WP1-B2-200
Installation, User and Service Manual Filter Unit WP1-B2-200 Disclaimer: All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form or by any means, without
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2018 Replaces: 03.2016 Technical data Description
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More informationRV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with
More informationHP3V SERIES. Swash-plate Type Axial Piston Variable Displacement Pump
1 /32 HP3V SERIES Swash-plate Type Axial Piston Variable Displacement Pump Hengli swash-plate axial piston pump HP3V, the key parts of the pump are made of imported materials, quality strictly controlled,
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationIPV Catalog High-pressure Internal Gear Pumps
IPV Catalog High-pressure Internal Gear Pumps Benefits that convince Features that count Machines that run Internal gear pumps from Voith Turbo H + L Hydraulic are working reliably in hun dreds of thousands
More informationTruck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps
Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationIPV catalog High-pressure internal gear pumps
Voith Turbo IPV catalog High-pressure internal gear pumps Benefits that convince Internal gear pumps from Voith Turbo are working reliably in hundreds of thousands of machines worldwide. Sophisticated
More informationHydraulic Pump Series F1 Fixed Displacement
Fixed Displacement Catalog 9129 8201-02 August, 1997 GB Content General information 3 Specifications 4 Pump and line selection 5 Ordering code 5 Standard versions 5 Installation dimensions 6 Installation
More informationFiltrec elements are tested according to ISO 2941, ISO 2942 and ISO 23181
Common HYDRAULIC FILTRATION Side wall mounting suction filters Technical Information Connection Ports: 1-1 1/4-1 1/2 BSP (other thread options on request) 1 1/2 SAE J518-3000/M12 Housing Materials: Cover:
More informationHYDRAULICS VINCKE HYDRAULIC PUMPS
VINCKE HYDRAULIC PUMPS TECH-VHP200.1 index 3 link to your page / link a su página Gear pumps Introduction 3 Group 0 3 Group 1 3 Group 2 3 Group 3 4 6 7 12 18 Variable displacement pumps 21 Hand pumps 3
More informationDeltaBase 102 Technical Data Sheet
Release Date: Sept 16th 2008 Page 1 of 6 PRODUCT OVERVIEW The DeltaBase 102 Anchor drill rig for double-head drilling systems, rotary / percussion operations is specially designed for the following key
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More information5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
More informationCOMPACT. Series CA 50 - CA 210
COMPACT Series CA 50 CA 210 Hägglunds Drives AB Hägglunds Drives AB is the worldwide market leader in design, manufacture and supply of heavyduty hydraulic motors and complete drive systems. Our head office
More informationAtlas Copco WEDA Line Pumps (50 Hz) Pumps for professionals
Atlas Copco WEDA Line Pumps ( Hz) Pumps for professionals Designed for Performance Years of expertise and technology built into our pumps WEDA Pumps originate from the old WEDA foundry in the 1 s and the
More informationAP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
More informationValves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 AXIAL PISTON PUMPS SHPV SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid
More informationHYDRAULIC MOTORS EPRM
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More informationHYDRAULICS VINCKE DIRECTIONAL CONTROL VALVES
VINCKE DIRECTIONAL CONTROL VALVES TECH-DCV200.1 index 3 link to your page / link a su página Monoblock hydraulic distributors Monoblock hydraulic distributors 35 liters 3 P35 Monoblock hydraulic directional
More informationOrdering Code of 2PBA Pumps
Ordering Code of 2PBA Pumps Pump Code 3 Displacement ( cm ) Direction of Version Sealing Inlet Fittings 2PBA 18 L S N A A Suction Fittings Included N Nitrile V Viton S Special Version C Classic Version
More information4 Stroke Diesel. Oil type SAE 15 W40/E 3
MARCH 2006 TECHNICAL DATA 2.33 GENERAL SPECIFICATIONS Cycle Air supply Injection 4 Stroke Diesel naturally aspirated direct Number of cylinders 4 in line 6 in line Bore mm 104 Stroke mm 132 Total displacement
More informationGeneral 4-stroke direct injected, turbocharged and aftercooled diesel engine
General 4-stroke direct injected, turbocharged and aftercooled diesel engine Number of cylinders No of valves Displacement, total Firing order Rotational direction, viewed from the front Bore Stroke Compression
More informationACD6. Std Line. Product Description. Max differential pressure: 7 bar Circulation, lubrication and transfer ACD GB
ACD6 Std Line Product Description Flow volume: 10-42 l/min Max differential pressure: 7 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The ACD pumps come in two
More informationIGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationLMP series
Low & Medium Pressure fi lters LMP 95-95-95 series Maximum working pressure up to.5 MPa (5 bar) - Flow rate up to 000 l/min 7 Low & Medium Pressure filters Introduction FILTER SIZG DEX CALCULATION CORRECTIVE
More informationHydraulic Pump Series F1plus Fixed Displacement
Fixed Displacement Catalog 9129 8218-02 February 1999, GB Content General information, design 3 Specifications 4 Pump cross section 4 Pump and line selection 5 Ordering code 6 Standard versions 6 Installation
More informationSeries Variable Displacement Piston Pump
AH Series Variable Displacement Piston Pump AH AH7 AH AH45 KS Geometric Displacement Max. Operating Series Graphic cm 3 /rev Pres. Page Symbol 3 4 5 6 7 8 9 3 4 5 MPa {kgf/cm 2 } AH-F-R--K-S- AH AH45-F-R--K-S-
More information" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller
More informationHigh-Pressure Plunger Pumps ARP -Line 150 ARP 250 ARP 400 ARP 550 ARP 700 ARP 1000 ARP
High-Pressure Plunger Pumps ARP -Line 150 ARP 250 ARP 400 ARP 550 ARP 700 ARP 1000 ARP High-Pressure Plunger Pump Type 150 ARP 200 211 133 255 331 340 250 manometer connection mounting space G 1 1/4 62
More informationIPC Medium-Pressure Internal Gear Pumps Technical Data Sheet
IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet Function 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial disc Axial
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z RE 18309-3 Edition: 03.2016 Replaces: 06.2010 Technical data Description
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More informationFlow rates to 500 l/min
FF 5 Filter housing in according to SE J066 for F filter elements Maximum pressure 50 bar Flow rates to 500 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing:
More informationGENERAL PUMPA member of the Interpump Group
FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required
More informationTriplex Plunger Pump, Total Start-Stop Feature
GENERAL PUMP A member of the Interpump Group ET Series FEATURES Total start-stop feature allows flow to activate electric motor Built-in unloader Triplex Plunger Pump, TRIPLEX TRIPLEX Nickel-plated cast
More informationVPPM /110 ED VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
16 100/110 ED VPPM VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS OPERATING PRINCIPLE The VPPM pumps are variable displacement axial-piston pumps with variable swash plate, suitable for applications with open
More informationPressure reducing valve, pilot operated
Pressure reducing valve, pilot operated RE 685/.5 Replaces:. /6 Type DR K Size Component series X Maximum operating pressure 5 bar Maximum flow l/min K478/7 Table of contents Contents Page Features Ordering
More informationV*L Pressure control valves in line
V*P / V*L... V*P... cap. II 7 V*PE... cap. II 8 V*L... cap. II 9 - Cap. II 10 BSVMP... cap. II 11 KEC16/5... cap. II 9 C*P16/5... cap. II 9 CETOP 3/NG06 cap. II 8 Standard spools for AD3E Cap. II 10 AD3E...
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationPumps. Pumps GoTo Europe
Pumps GoTo Europe 7 Pumps Axial piston pumps Axial piston pumps in swash plate and bent axis design are intended for the medium and high pressure range. Variations in the designs, in the performance ranges
More informationFixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement
More informationTECHNICAL UNION
Bent Axis Pump This hydraulic pump is a Bent Axist type pump, with fixed displacement, developed under the design of spherical head pistons. This design is extremely efficient, as well as high performance.
More informationMounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
More informationProcess Multi-Rheo Filter PMRF
Process Multi-Rheo Filter PMRF PMRF-1 PMRF-2 PMRF-3 PMRF-5 PMRF-6 PMRF-7 1. Technical Specifications 1.1 General The filter series PMRF (for duplex filters see PMRFD) Process Multi- Rheo Filter completes
More informationHydraulic Pump VP1-120
REECHSROY GROUP REECHNOLOGY Bulgaria, Varna 9000 Industrial Zone Str. Studentska 1 U/UK1 odernization, complex repair and maintenance of heavy industrial equipment. Infrastructure construction and management
More informationxxx displacement pumps TXV for trucks
Variable xxx xxx displacement pumps TXV for trucks 1 sommaire why use a variable displacement pump?... 3 your hydraulic equipment.................. 4 load-sensing.... 5 variable displacement... 6 TXV 40
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 QUANTITY FOR MODEL 302 MECHANICAL SEAL 303 BEARINGS 304 FITTINGS 305
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 3-4-5-6 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 7-8-9 IMPELLERS
More informationContents Page Chapter. - Volvo PTO s Scania PTO s Universal for Scania ED 90 engines for Scania ED 120 engines...
Adapter kits and accessories for F1, F2, T1 and VP1 pumps Contents Page Chapter PTO Air valve kits: - Volvo PTO s...48 - Scania PTO s...48 - Universal... 48 PTO adapter kits: - for Scania ED 90 engines...49
More informationDUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 CURVE SPECIFICATIONS 203 1X 51-S 204 1X 51.5-S 205 2X 51.5-S 206 2X 52.2-S 207 2X 53-S 208 3X
More informationAV 23 Balancing valves SETTER Inline
AV Balancing valves SETTER Inline Application Direct reading and balancing valve with visual flow indication. Correct balancing of circuits ensure optimum efficiency of the system and can therefore help
More informationDUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 CURVE SPECIFICATIONS 203 1X 51-S 204 1X 51.5-S 205 2X 51.5-S 206 2X 52.2-S 207 2X 53-S 208 3X
More informationRAMIRENT E62. Excavators Specifications. Dimensions
Dimensions (A) Blade height 410.0 mm (B) Clearance, upper structure to ground line 635.0 mm (C) Ground line to top of engine cover 1620.0 mm (D) Length of track on ground 1990.0 mm (E) Machine centre line
More informationVane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:
More informationPVD /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE
14 100/117 ED PVD VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with mechanical pressure compensator. The pressure
More informationRadial piston motor for frame integrated drives MCR-A
Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationDUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 GAMMA 203 CURVE SPECIFICATIONS 204 1X 51-S 205 1X 51.5-S 206 2X 51.5-S 207 2X 52.2-S 208 2X 53-S 209 3X 53.7-S 210 3X
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 CONSTRUCTIONS 301 CONSTRUCTIONS 302 MECHANICAL SEAL 303 COUNTERFLANGE 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 3-4-5-6 impellers ) 204 PERFORMANCE CURVE 3 ( 7-8-9 impellers ) 205
More information