IPV Catalog High-pressure Internal Gear Pumps
|
|
- Madison Dixon
- 6 years ago
- Views:
Transcription
1 IPV Catalog High-pressure Internal Gear Pumps Benefits that convince Features that count Machines that run Internal gear pumps from Voith Turbo H + L Hydraulic are working reliably in hun dreds of thousands of machines worldwide. Sophisticated technol ogy, robust design and costefficient operation have convinced thou sands of customers to trust Voith. Based on that trust, we have be come the world market leader for high-pressure inter nal gear pumps with gap compensation. The market requires hydraulic pumps that are quiet and compact with min imal pressure pulsations at simultaneously high efficiencies. Voith Turbo H + L Hydraulic has met these require ments with the IPV pumps, which feature radial and axial sealing gap compensation with volume-opti mized involute gearing. Rarely seen, but hard at work in countless machines, Voith Turbo H + L Hydraulic in ternal gear pumps reliably provide high pressures. Their main applica tions are machines in the plastics and sheetmetal processing sectors, presses as well as conveying and lifting equipment. These pumps are also in demand for shipbuilding, municipal vehicles, power plants and special machine building.
2 Contents Die casting machine, pump with variable flow by speed control Design and function 3 Performance data 4 IPV 3 6 IPV 4 8 IPV 0 IPV 6 2 IPV 7 4 SAE suction and pressure flanges 6 Type code 7 Order designation Multi-flow pumps 8 Pump combinations Designs 9 2
3 Design and Function Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment Axial disc 6 Axial pressure area 7 Plain bearings 8 Housing 9 Hydrostatic bearing 0 End cover with bleeder screw a 4b 3 Suction chamber Pressure chamber Design features Function Combinations Internal gear principle Sleeve bearing Radial and axial sealing gap compensation Volume-optimized involute gearing Product characteristics Long life High volume efficiency High overall efficiency Very low pump flow and pressure pulsation Low noise level Compact dimensions Low weight Large speed range Very good suction properties High allowed viscosity Simple maintenance Multiple pumps and pump combinations are possible Suitable for variable-speed drives (variable volume flow!) Motor operation possible (energy recovery!) Rotation of the gears within the pump draws in the pressure fluid (usually hydraulic oil) into the space between the pinion and internal gear. The two smooth running gears help to ensure excellent intake behaviour. In the radial direction, the gear chambers are closed by gear meshing and the filler piece. In the axial direction, the axial plates seal the pressure chamber with the minimal possible gap. This design minimizes volume losses and increases efficiency. When the gears rotate, the tooth heads enter the gaps between teeth and displace the pressure fluid. IPV pumps can be combined to form dual or multi-flow pumps. Combinations with other Voith Turbo H + L Hydraulic pump series are also possible. Used in conjunction with pumps from the medium and low-pressure series, Voith equipment can handle a wide range of potential applications. For further information on possible combinations, refer to page 9 and brochure G74 (Voith multi-flow pumps). Combinations with third-party products are generally possible. We ll be happy to discuss your needs. Variable volume flow We supply complete hydraulic units with IPV pumps, asynchronous motors and frequency converters (EPA/ EPAF system) to generate variable volume flows. For further information, refer to our brochure G4 (Voith EPA system). 3
4 Performance data Technical data Design Internal gear pump with radial and axial sealing gap compensation Calculations Pump flow Q = V g th n η v 0-3 [l/min] Power P = Q Δp [kw] 600 η g Type IPV Mounting types SAE hole flange; ISO 309/ or V g th Pump volume per revolution [cm 3 ] VDMA hole flange; ISO 309/2 n Speed [min - ] Line mounting SAE suction and pressure flange J 8 C Code 6 η v Volumetric efficiency Sense of rotation Right or left-hand rotation η g Overall efficiency Mounting position any Δp Differential pressure [bar] Shaft load For details of radial and axial drive shaft loads please contact your Voith Turbo H + L Hydraulic representative Input pressure 0,6 3 bar absolute pressure Pressure fluid HLP mineral oils DIN 24, part 2 or 3 Viscosity range of the pressure fluid 0 00 mm 2 s - (cst) Permissible start viscosity max. 00 mm 2 s - (cst) Permissible temperature of the pressure fluid Required purity of the pressure fluid according to NAS C Class 8 Filtration Filtration quotient min. β 7, recommended β 0 00 (longer life) Permissible ambient temperature C 4
5 Characteristics Speed Delivery Pressures Type, size-delivery Displacement per revolution min. max. at.00 rpm Continuous Peak at.00 rpm Peak at n max [cm 3 ] [min - ] [min - ] [l/min] [bar] [bar] [bar] IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , IPV , The values given apply for: Pumping of mineral oils with a viscosity of 40 mm 2 s - An input pressure of bar absolute Notes: Peak pressures apply for % of operating time with a maximum cycle time of minute. Please inquire about peak pressures at non-standard speeds. Due to production tolerances, the pump volume may be reduced by up to.%.
6 r IPV 3 Standard Design Design and dimensions h9 ø8h c/2 c/2 v g 9. w,8 * M * ø82.h8 c e l h k i * Ensure the M0xplug screw, hexagon socket SW, is tightened to a torque of 0 Nm during pumping operation. Dependent on the pump position, filling or ventilation is possible here prior to commissioning. Design Dimensions SAE flange no. c e g h i k l r v w Weight [mm] [mm] [mm] [mm] [mm] [mm] Thread [mm] [mm] Thread [kg] IPV M8x M8x IPV M8x M8x IPV M0x M8x IPV M0x M8x IPV M0x M8x A B Allowed input torques: Input shaft A: 60 Nm Secondary shaft B: Nm Delivery Q Efficiency v and g 00 v 9 90 Delivery Q [l/min] 0 Efficiency [%] 8 7 g
7 Type Pump sizes Rotation, suction connection Mounting fl ange Shaft end IPV 3 3. Standard Clockwise rotation, radial suction port SAE 2-hole fl ange, dimensions on left Parallel shaft with keyway connection, dimensions on left Variants Anti-clockwise rotation, radial suction port Involute gearing with SAE 2-hole fl ange ANSI B92.a 6 / 32 DP VDMA 2-hole fl ange h9 ø h8 8 ø6 h Designation according to type code Type code/order designation, see page 7 Input power P Airborne noise level Measuring location m axial Measurement conditions Input power P [kw] Airborne noise level [db(a)] Speed:.00 rpm Viscosity of pressure fluid: 46 mm 2 s - Operating temperature: 40 C Characteristic curves: IPV 3 3. IPV 3 IPV IPV 3 8 IPV 3 0 Note: Measurement taken in a low-noise room. In a anechoic room, the measurements are approx. db(a) lower. 7
8 r IPV 4 Standard Design Design and dimensions c/2 c/ h9 v * 7 67 ø2 h7 28 ø g w, M8x9 * ø0.6 h8 c e l h k i * Ensure the M0x plug screw, hexagon socket SW, is tightened to a torque of 0 Nm during pumping operation. Dependent on the pump position, filling or ventilation is possible here prior to commissioning. Design Dimensions SAE fl ange no. c e g h i k l r v w Weight [mm] [mm] [mm] [mm] [mm] [mm] Thread [mm] [mm] Thread [kg] IPV M0x M8x IPV M0x M8x IPV M0x M0x IPV M0x M0x IPV M0x M0x.0 3 A B Allowed input torques: Input shaft A: 33 Nm Secondary shaft B: 90 Nm Delivery Q Effi ciency v and g 00 v Delivery Q [l/min] 3 2 Effi ciency [%] 8 7 g
9 Type Pump sizes Rotation, suction connection Mounting fl ange Shaft end IPV 4 3 Standard Clockwise rotation, radial suction port SAE 2-hole fl ange, dimensions on left Parallel shaft with keyway connection, dimensions on left Variants Anti-clockwise rotation, radial suction port Involute gearing with SAE 2-hole fl ange ANSI B92.a 6 / 32 DP SAE 4-hole fl ange ø0.6 h8 ø VDMA 4-hole fl ange ø00.6 h8 ø Designation according to type code Type code/order designation, see page 7 Input power P Airborne noise level Measuring location m axial Measurement conditions Input power P [kw] Airborne noise level [db(a)] Speed:.00 rpm Viscosity of pressure fluid: 46 mm 2 s - Operating temperature: 40 C Characteristic curves: IPV 4 3 IPV 4 6 IPV 4 IPV 4 2 IPV 4 32 Note: Measurement taken in a low-noise room. In a anechoic room, the measurements are approx. db(a) lower. 9
10 r IPV Standard Design Design and dimensions h c/2 c/2 v * M2x2 8 ø32 h g w * ø27 h8 c e l h k i * Ensure the M0x plug screw, hexagon socket SW, is tightened to a torque of 0 Nm during pumping operation. Dependent on the pump position, filling or ventilation is possible here prior to commissioning. Design Dimensions SAE fl ange no. c e g h i k l r v w Weight [mm] [mm] [mm] [mm] [mm] [mm] Thread [mm] [mm] Thread [kg] IPV M0x M0x. 3 IPV M2x M0x IPV M2x M0x IPV M2x M0x A B Allowed input torques: Input shaft A: 60 Nm Secondary shaft B: 400 Nm Delivery Q Effi ciency v and g 00 9 v 90 Delivery Q [l/min] Effi ciency [%] 8 7 g
11 Type Pump sizes Rotation, suction connection Mounting fl ange Shaft end IPV 32 Standard Clockwise rotation, radial suction port SAE 2-hole fl ange, dimensions on left Parallel shaft with keyway connection, dimensions on left Variants Anti-clockwise rotation, radial suction port SAE 2-hole fl ange, variant Involute gearing ø0.6 h8 3. ANSI B92.a 2 / 24 DP SAE 4-hole fl ange 6 6 ø62 60 ø27 h8 ca. ø00 7, 3 3 ø90 3 VDMA 4-hole fl ange 6 9 ø60 8 ø2 h ø Designation according to type code Type code/order designation, see page 7 Input power P Airborne noise level Measuring location m axial Measurement conditions Input power P [kw] Airborne noise level [db(a)] Speed:.00 rpm Viscosity of pressure fluid: 46 mm 2 s - Operating temperature: 40 C Characteristic curves: IPV 32 IPV 40 IPV 0 IPV 64 Note: Measurement taken in a low-noise room. In a anechoic room, the measurements are approx. db(a) lower.
12 r IPV 6 Standard Design Design and dimensions h c/2 c/2 v *.2 22 M2x ø40 h g w * ø2.4 h8 c e l h k i * Ensure the M0x plug screw, hexagon socket SW, is tightened to a torque of 0 Nm during pumping operation. Dependent on the pump position, filling or ventilation is possible here prior to commissioning. Design Dimensions SAE fl ange no. c e g h i k l r v w Weight [mm] [mm] [mm] [mm] [mm] [mm] Thread [mm] [mm] Thread [kg] IPV M2x 2,4 26,2 M0x 29, IPV ,8 42,9 M2x M2x 30,7 4 IPV ,8 42,9 M2x M2x 32,6 4 IPV ,8 42,9 M2x M0x6 3,0 4 A B Allowed input torques: Input shaft A:,00 Nm Secondary shaft B: 7 Nm Delivery Q Effi ciency v and g 0 00 v 7 9 Delivery Q [l/min] Effi ciency [%] g
13 Type Pump sizes Rotation, suction connection Mounting fl ange Shaft end IPV 6 64 Standard Clockwise rotation, radial suction port SAE 2-hole fl ange, dimensions on left Parallel shaft with keyway connection, dimensions on left Variants Anti-clockwise rotation, radial suction port SAE 2-hole fl ange, variant Involute gearing ø27 h8 7. ANSI B92.a 6 / 32 DP SAE 4-hole fl ange 6 ø228.6 ø2.4 h8 ca. ø VDMA 4-hole fl ange 8 9 ø0 82 ø60.6 h ø Designation according to type code Type code/order designation, see page 7 Input power P Airborne noise level Measuring location m axial Input power P [kw] Airborne noise level [db(a)] Measurement conditions Speed:.00 rpm Viscosity of pressure fluid: 46 mm 2 s - Operating temperature: 40 C Characteristic curves: IPV 6 64 IPV 6 IPV 6 00 IPV 6 2 Note: Measurement taken in a low-noise room. In a anechoic room, the measurements are approx. db(a) lower. 3
14 r IPV 7 Standard Design Design and dimensions h9 ø0 h7 3. ca. ø c/2 c/2 v 6 g * M2x ø228.6 * ø2.4 h8 c e l h k i * Ensure the M0x plug screw, hexagon socket SW, is tightened to a torque of 0 Nm during pumping operation. Dependent on the pump position, filling or ventilation is possible here prior to commissioning. Design Dimensions SAE fl ange no. c e g h i k l r v w Weight [mm] [mm] [mm] [mm] [mm] [mm] Thread [mm] [mm] Thread [kg] IPV ,8 42,9 M2x M2x 46, 4 IPV ,8 M2x M2x IPV ,8 M2x M2x IPV ,3 62 M6x M2x A B Allowed input torques: Input shaft A:,960 Nm Secondary shaft B:,0 Nm Delivery Q Effi ciency v and g v 30 9 Delivery Q [l/min] Effi ciency [%] g
15 Type Pump sizes Rotation, suction connection Mounting fl ange Shaft end IPV 7 2 Standard Clockwise rotation, radial suction port SAE 4-hole fl ange, dimensions on left Parallel shaft with keyway connection, dimensions on left Variants Anti-clockwise rotation, radial suction port Involute gearing with 6 SAE 4-hole fl ange 0 20 ANSI B92.a 8 / 6 DP VDMA 4-hole fl ange 9 ø20 0 ø0 h ø290. Designation according to type code Type code/order designation, see page 7 Input power P Airborne noise level Measuring location m axial Input power P [kw] Airborne noise level [db(a)] Measurement conditions Speed:.00 rpm Viscosity of pressure fluid: 46 mm 2 s - Operating temperature: 40 C Characteristic curves: IPV 7 2 IPV 7 60 IPV 7 0 IPV 7 20 Note: Measurement taken in a low-noise room. In a anechoic room, the measurements are approx. db(a) lower.
16 SAE Suction and Pressure Flanges according to SAE J 8 C Code 6 SAE fl ange, single-piece ) 2) c A i k B D SAE fl ange no. A B C D E ) i k S 2) max. pressure Thread [mm] [mm] [mm] Seal ring [mm] [mm] Thread [bar] 0 G / ,66 3, M 8 34 G 3 / ,99 3, M G ,92 3, M G - / ,69 3, M ) G - / ,22 3, M ) 30 G - / ,22 3, M 2 7 G ,74 3, M G 2- / ,44 3, M G ,32 3, M G ,72 3, M 6 34 ) Round seal ring (O-ring) ISO-R 629 NBR 2) Machine screw EN ISO ) Special design, deviating from SAE J 8 C Code 6 6
17 Type Code Order Designation IPV Example: IPV Shaft end 0 Splined gear shaft ANSI B92.a Parallel shaft with keyway Mounting flange 0 SAE 2-hole SAE 4-hole 4 VDMA 2-hole VDMA 4-hole 7 SAE 2-hole, variant Rotation, suction port Clockwise rotation, radial suction port radial 6 Anti-clockwise rotation, radial suction port radial 4 Clockwise rotation, special design 9 Anti-clockwise rotation, special design Delivery Frame size delivery Frame size Type of internal gear pump IPV 7
18 Multi-fl ow Pumps Pump Combinations IPC 7 IPV 7 IPH 6 IPC 6 IPV 6 IPH IPN 6 IPC IPV IPH 4 IPN IPC 4 IPV 4 IPN 4 IPM 4 IPV 3 Pump combinations in order of type and size Combinations of IPV pumps IPV pumps of identical or different sizes can be combined in multiflow pumps. All sizes of the relevant pump volume are available as two- or three-flow pumps; four-flow pumps must be designed by Voith Turbo H + L Hydraulic. The pumps are arranged in increasing order according to frame size and delivery. Combinations of IPV/IP - pumps It is possible to combine IPV pumps with other Voith Turbo H + L Hydraulic pump series (e.g. medium-pres sure pumps IPC or low-pressure pumps IPN). The pumps are arranged by types and sizes as shown in the illustration above. If identical types or identical sizes follow each other, the pump with the higher pump flow is placed closer to the drive. Selection. Determine pressure ranges and define the appropriate pump serie(s). 2. Determine pump volume and select the appropriate size(s). 3. Define sequence of the pumps. 4. Check the torques.. Determine rotation and suction. 6. Specify mounting flange and shaft end. Mounting, assembly Multi-flow pumps are generally mounted to the drive by means of a flange. All information about the flange designs and shaft ends is found in the catalog of the relevant pump series. For more information, for example about definition of the adapter housings, refer to brochure G 74 (Voith multi-flow pump). 8
19 Designs Rotation and suction Mounting fl ange Shaft end clockwise anti-clockwise For designs and dimensions, see catalog of the relevant pump series. For designs and dimensions, see catalog of the relevant pump series SAE 2-hole-flange SAE 4-hole-flange 3 8 Special design 4 9 Special design 4 7 VDMA 2-hole-flange VDMA 4-hole-flange SAE 2-hole-flange 9
20 Voith Turbo H + L Hydraulic GmbH & Co. KG Schuckertstr Rutesheim, Germany Tel Fax sales-rut@voith.com Plastics injection molding machine Folding press Punching press Hydraulic unit Lifting platform Marine applications Additional applications: Die casting machines Packing presses Shears Ground drilling machines Test rigs Hydraulic presses Crane building Lifting devices Garbage collection vehicles G 48 en, 0.09, aik, 0. Printed in Germany. Dimensions and illustrations non-committal, subject to change.
IPV catalog High-pressure internal gear pumps
Voith Turbo IPV catalog High-pressure internal gear pumps Benefits that convince Internal gear pumps from Voith Turbo are working reliably in hundreds of thousands of machines worldwide. Sophisticated
More informationIPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationIPC Medium-Pressure Internal Gear Pumps Technical Data Sheet
IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet Function 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial disc Axial
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationIPCA Medium-pressure Internal Gear Pumps Technical Data Sheet
IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet Design and Function 1 7 6 5 9 2 6 5 7 8 2 1 4a 4b 3 1 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationPVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More information5.2 MEDIUM HEAVY DUTY SERIES SIZE 3
.2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6
More informationEIPS2 INTERNAL GEAR PUMPS
EIPS2 INTERNAL GEAR PUMPS Internal gear pump Type with constant displacement volume Characteristics Internal gear pump with axial and radial gap compensation Radial compensation with segments Pressure
More informationEIPC3 EIPC5 EIPC6. Internal gear pumps. eckerle.com
EIPC3 EIPC5 EIPC6 Internal gear pumps eckerle.com Internal gear pump Type EIPC3 for industrial applications with constant displacement volume EIPC3 Characteristics Internal gear pump with axial and radial
More information5.1 MEDIUM HEAVY DUTY SERIES SIZE 2
.1 MEDIUM HEAVY DUTY SERIES SIZE 2 CONTENTS PGI100 Ordering Code.1.1 Medium Heavy Duty Series Technical Information.1.2 Specifications.1.3 Hydraulic fluids.1.4 Viscosity range.1. Temperature range.1.6
More informationRA / Internal Gear Pump Model GP3, Series 3X Fixed Displacement. Typical application:
Sizes 20 to 32 Internal Gear Pump Model GP3, Series 3X Fixed Displacement up to 5076 PSI 1.25 to 1.98 in 3 (350 bar) (20.6 to 32.5 cm 3 ) RA 10 234/07.97 Characteristics: Peak pressure of up to 5.076 PSI
More informationRA / Internal Gear Pump Model GP2, Series 2X Fixed Displacement. Typical application:
Sizes 6.3 to 16 Internal Gear Pump Model GP2, Series 2X Fixed Displacement up to 576 PSI.397 to.98 in 3 (35 bar) (6.5 to 16 cm 3 ) RA 1 23/6.97 RA 1 23/6.97 Characteristics: Peak pressure of up to 576
More informationIndustrial Components. Internal gear pumps DHPC3, DHPC5, DHPC6
Industrial Components Internal gear pumps DHPC3, DHPC5, DHPC6 Internal gear pump Type DHPC3 for industrial applications with constant displacement volume Characteristics Internal gear pump with axial and
More informationIGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
More informationEIPC3 EIPC5 INTERNAL GEAR PUMPS EIPC5 NEW!
EIPC3 EIPC5 INTERNAL GEAR PUMPS new Generation EIPC new technology up to 320 bar industrial version aluminium housing noise-optimized multi-flow-pumps with common suction port NEW! EIPC5 Internal gear
More informationExternal gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
More informationIndustrial Components. Internal gear pumps DHPH2, DHPH3, DHPH5, DHPH6
Industrial Components Internal gear pumps DHPH2, DHPH3, DHPH5, DHPH6 Internal gear pump Type DHPH2 high pressure pump with constant displacement volume Characteristics Internal gear pump with axial and
More informationRE 91808/ AA4VSE Plug-in dual displacement motor. High pressure range. Series 10 Axial piston swashplate design, SAE model
AA4VSE Plug-in dual displacement motor Series Axial piston swashplate design, SAE model RE 91808/09.90 RE 91808/09.90 Brueninghaus Hydromatik Size 250 Nominal pressure 350 bar Peak pressure 400 bar High
More informationEIPH2 EIPH3 EIPH5 EIPH6
EIPH2 EIPH3 EIPH5 EIPH6 Internal gear pumps eckerle.com Internal gear pump Type EIPH2 high pressure pump with constant displacement volume EIPH2 Characteristics Internal gear pump with axial and radial
More informationVariable Displacement Plug-In Motor A6VE
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series
More informationRE / Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW. Hydraulik Nord. Contents 1/26
RE14 6/3.96 Gerotormotors (Low Speed High Torque Motors) Type GMS, GMSS, GMSW, GMT, GMTS, GMTW RE 14 6/3.96 Standard motor type GMS Standard motor type GMT Short motor type GMTS Contents Name page Characteristics,
More informationInternal gear pump Type PGH Fixed displacement
RE 10 223/07.99 Replaces: 01.98 Internal gear pump Type GH Fixed displacement Frame sizes 2, 3, 4 and 5 eries 2X Maximum operating pressure 350 bar Maximum displacement 6 to 250 cm 3 DR 67180-3/94 Internal
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationFixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement
More informationAxial piston variable pump A7VO
Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationExternal gear pump Series G
External gear pump Series G RE 1 93/8.7 AZPG-22 Fixed pumps V = 22.5...63 cm 3 /rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps 4 Ordering code multiple pumps
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single
More informationAP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
More informationAxial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
More informationVane pump, direct operated
Vane pump, direct operated RE 1/8.8 Replaces: 1. 1/18 Type PV7 A Nominal sizes 1 to Series 1X / X Maximum operating pressure 1 bar Displacement volume 1 to cm 3 H17 H9 Overview of contents Features Contents
More informationInternal gear pump, fixed displacement
Internal gear pump, fixed displacement RE 023/04.05 Replaces: 06.02 /24 Type GF Frame sizes, 2 and 3 Component series: 2X (F and 2) 3X (F3) Maximum operating pressure 250 bar Maximum displacement.7 to
More informationAxial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
More informationAXIAL PISTON MOTORS SHMF
SECTIONAL VIEW Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output shaft Valve block Shuttle valve Swashplate 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working
More informationUŽSISAKYKITE internetu telefonu el. paštu
Features Axial piston pump MA10VO in swashplate design is used in open loop circuits. Flow is proportional to drive speed and displacement. By adjusting the position of the swashplate it is possible to
More informationHigh Pressure Internal Gear Pumps Series QX
High Pressure Internal Gear Pumps Series QX motion and progress 1 / 32 Classification: 410.10..00 Reference: -P -000021 -E -06 / 05.05 Contents 1 General 1.1 Product description 3 1.2 Advantages 3 2 Technical
More informationInternal Gear Pump, Fixed Displacement PGF
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies neumatics ervice Internal Gear ump, Fixed Displacement GF RE 023/05.2 /20 Replaces: 04.05 Data Type GF sheet Frame sizes,
More informationExternal gear motor High Performance AZMB
External gear motor High Performance AZMB RE 14027 Edition: 0.201 Platform B Fixed displacement Sizes 2.5 to 7.1 Continuous pressure up to 220 bar Intermittent pressure up to 2 bar Features Consistently
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationHigh Pressure Gear Motors KM 5
High Pressure Gear Motors KM 5 2 KRACHT GmbH Gewerbestr. 20 58791 Werdohl, Germany fon +49(0)2392/935-0 fax +49(0)2392/935 209 mail info@kracht.eu web www.kracht.eu Construction 1 Housing 2 Gearing 3 Drive
More informationType KKP. Combination pumps
Features Compact and light Integrated low-pressure unloading valve and fail safe valve (not suitable for continuons rating) Can be started in maximum pressure mode Self-priming Direct installation of motor
More informationAxial Piston Fixed Pump A2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal
More informationFeed Pumps VP / VPB / VPBM
Feed Pumps VP / VPB / VPBM Symbol General The feed pumps from the VP series are low-noise, single-stroke vane pumps with constant flow rate. Using a damped bell housing (PT) enables noise levels to be
More informationAxial Piston Fixed Pump A17FNO Series 10
Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with
More informationVariable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
More informationExternal gear pump SILENCE PLUS AZPJ
External gear pump SILENCE PLUS AZPJ RE 194 Edition: 8.215 Replaces: 5.212 Platform F Low-noise fixed pump Sizes 12 to 28 Continuous pressure up to 2 bar Intermittent pressure up to 28 bar Features Very
More informationAxial Piston Variable Pump A4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump A4VG RE 92003/03.09 1/64 Replaces: 09.07 Data sheet Series 32 Sizes 28...250
More informationExternal Gear Pumps Series F
External Gear Pumps Series F AZPF-... Fixed pumps V = 4.0...28 cm 3 /rev Overview of contents ontents Page General 2 Product overview 3 single pumps 4 multiple pumps 5 rive shaft 6 Front cover 7 Line ports
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RE 10 089/02.07 Replaces: Series F Issue 04.04 AZPF-... Fixed pumps V = 4.0...28 cm 3 /rev Overview of contents ontents Page General 2 Product overview 3 single pumps 4 multiple
More informationAxial piston variable pump A4VG Series 32. Europe. RE-E Edition: Replaces:
Axial piston variable pump A4VG Series 32 Europe RE-E 92003 Edition: 04.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit Size 28 to 125 Nominal pressure 400 bar Maximum pressure
More informationFixed Displacement Pump A2FO
RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95
More informationPVD /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE
14 100/117 ED PVD VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTER OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with mechanical pressure compensator. The pressure
More informationRexroth Hydraulics. Fixed displacement vane pumps Types PVV and PVQ RE /11.97
RE 1 335/1.97 RE 1 335/11.97 Fixed displacement vane pumps Types and Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 H/A/D 5769/97 Single pump type
More informationAxial Piston Fixed Displacement Pump KFA
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Axial Piston Fixed Displacement Pump KFA RE 91 501/06.03 1/12
More information1.3 HIGH PRESSURE SERIES
1.3 HIGH PRESSURE SERIES content Ordering Code 1.3.1 High Pressure Series Technical Information 1.3.2 Specifications 1.3.3 Hydraulic Fluids 1.3.4 Viscosity Range 1.3.5 Temperature Range 1.3.6 Seals 1.3.7
More informationVariable Displacement Pump A4VG for closed circuits
RE 92 003/05.99 RE 92 003/05.99 replaces: 02.98 Variable Displacement Pump A4VG for closed circuits Sizes 28...250 Series 3 Nominal pressure 400 bar Peak pressure 450 bar A4VG...EP Index Features 1 Ordering
More informationRV1P /118 ED VARIABLE DISPLACEMENT VANE PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
14 201/118 ED RV1P VARIABLE DISPLACEMENT VANE PUMPS OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS (measured with mineral oil with viscosity of 46 cst at 40 C) RV1P are variable displacement vane pumps with
More informationExternal Gear Pumps Series N
External Gear Pumps Series N RE 1 91/2.7 AZPN-... Fixed pumps V =...36 cm 3 /rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps 4 Ordering code multiple pumps
More informationVariable Plug-In Motor A6VE
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Variable Plug-In Motor A6VE RE 91 606/10.07 1/16 Replaces: 06.05 Technical data sheet Series 6 Size Nominal
More informationFeed Pumps Direct Drive Series 1.1.
1.1. FEED PUMP SERIES FZP AND MFZP 1. GENERAL The feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief
More informationAxial Piston Variable Double Pump A8VO
Axial Piston Variable Double Pump A8VO RE 93010/03.09 1/40 Replaces: 11.07 Data sheet Series 61 / 63 Sizes 55...200 Nominal pressure 350 bar Peak pressure 400 bar for open circuit Contents Ordering Code
More informationAxial piston fixed motor A2FM series 70. Americas. RE-A Edition:
Axial piston fixed motor A2FM series 70 Americas RE-A 91071 Edition: 05.2015 A2FMN (Sizes 90 and 107): Nominal pressure 300 bar Maximum pressure 350 bar A2FMM (Sizes 80 and 90): Nominal pressure 400 bar
More informationRE / Gerotormotors (Low Speed High Torque Motors) Type GMP, GMR, GMVD. Hydraulik Nord. Contents 1/32. Replaces:
Gerotormotors (Low Speed High Torque otors) Type GP, GR, GVD RE 14 7/3.96 RE 14 7/11.96 Replaces: 3.96 Characteristics: Very smooth running, even at low speeds Wide speed range Constant output torque over
More informationAxial piston units A10FZO, A10VZO and A10FZG, A10VZG Series 10 for variable-speed drives
Axial piston units A10FZO, A10VZO and A10FZG, A10VZG Series 10 for variable-speed drives RE 91485 Edition: 10.2016 Replaces: 06.2011 For variable-speed operation with synchronous and asynchronous motors
More informationGerotor pump, fixed displacement volume
Gerotor pump, fixed displacement volume RE 10545/12.11 1/12 Type GZ Component series 1X Maximum operating pressure 15 bar Maximum displacement 140 cm³ H7572_d Table of contents Contents age eatures 1 Ordering
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Contents Contents Page PGP/PGM500 Characteristics... 3 PGP502 Ordering... 4 PGP502 Performance curves... 5
More information4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
More informationVariable Vane Pump, Direct Controlled PV7...A Series 1X / 2X
Variable Vane Pump, Direct Controlled PV7...A Series 1X / X RE 1 Issue: 1.13 Replaces: 8.8 Sizes 1 to Maximum pressure 1 bar Displacement volume 1 to cm 3 Features Very short control times Low noise Mounting
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationAxial Piston Variable Pump A2VK
Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents
More informationHigh Pressure Gear Pumps KP 5
High Pressure Gear Pumps KP 5 Construction 1 6 2 9 8 4 5 7 3 1 Housing 2 Gearing 3 Drive shaft end 4 Flange cover 5 Roller bearing 6 Sliding plates 7 Lip-type shaft seal 8 Plain bearing 9 Housing gasket
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More informationAxial Piston Variable Pump AA4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump AA4VG RA 92003-A/06.09 1/64 Replaces: 03.09 Data sheet Series 32 Size 28...
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted
More informationAxial Piston Variable Pump A10VO
Electric Drives and Controls Hydraulics inear Motion and Assembly Technologies Pneumatics ervice Axial Piston Variable Pump A10VO RA 92703/11.07 1/44 Replaces: 06.07 Data sheet eries 52/53 ize 10...85
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationExternal gear pumps Type G2, Series 4X
E 1 /.99 External gear pumps Type G2, Series X E 1 /.99 NS to 22 up to 2 bar up to 22. cm eplaces:.98 New principle of housing sealing, thereby giving a very long housing service life ong seal service
More informationInternal Gear Pumps. Series QX. Reference: 100-P E-10 1/32. Issue:
Internal Gear Pumps eries QX Reference: -P-000021-E-10 Issue: 11.2011 1/32 2/32 Contents Page 1 General... 5 1.1 Product description... 5 1.2 Advantages... 5 2 Technical data... 5 2.1 General (deviating
More informationAxial piston variable pump A1VO series 10
Axial piston variable pump A1VO series 10 RE 92650 Edition: 09.2013 Replaces: 02.2013 izes 18, 35 Nominal pressure 250 bar Maximum pressure 280 bar Open circuit Features Variable axial piston pump of swashplate
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationPUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar
/7 ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More informationAxial Piston Variable Pump A4VG
Axial Piston Variable Pump A4VG RE 92003/06.09 1/64 Replaces: 03.09 Data sheet Series 32 Sizes 28...250 Nominal 400 bar Peak 450 bar Closed circuit Contents Ordering Code / Standard Program 2 Technical
More informationFlow sharing control block in mono block / sandwich plate design M6-22
Flow sharing control block in mono block / sandwich plate design M6-22 RE 64322 Edition: 01.2015 Replaces: 05.2012 Size 22 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420
More informationAxial Piston Fixed Motor A2FNM for Fan Drives and Flywheel Mass
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FNM for Fan Drives and Flywheel Mass RE 91007/02.11 1/16 Data sheet Series 61
More informationAxial Piston Variable Pump A15VSO
Axial iston Variable ump A15VSO RE 928/5.12 1/4 Replaces: 3.1 Data sheet Series 1 Sizes 175 to 28 Nominal pressure 35 bar Maximum pressure 42 bar Open circuit Contents Ordering code for standard program
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS FEATURES Variable displacement axial piston pumps swash plate design ideally suited for medium and high pressure open circuit applications. The compact design allows
More informationPISTON MOTORS FOR CLOSED LOOP SYSTEMS types HMF/A/V/R-02
1-control optional swashing to 0 cc /rev 2-swash plate hydrostatic bearing 3-piston-slipper assembly 21 swash angle 4-housing monoshell for high rigidity 5-valve plate housing highly integrated 6-control
More information2.4 HEAVY DUTY SERIES
2 2.4 HEAVY DUTY SERIES CONTENTS PPV102 Ordering Code 2.4.1 Heavy Duty Series 2.4.2 Heavy Duty Series compensator 2.4.3 Standard gear pump models Technical Information 2.4.4 Specifications 2.4.5 Hydraulic
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationRadial piston motors for industrial applications MCR-D
Radial piston motors for industrial applications MCR-D MCR-E RE 15196 Edition: 02.2017 Replaces: 12.2013 MCR-D Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450
More informationOrbital Motors Type OMP, OMR and OMH. Technical Information
Orbital Motors Type OMP, OMR and OMH Technical Information OMP, OMR and OMH A Wide Range of Hydraulics Motors F 301 245 A Wide Range of Hydraulic Motors Sauer-Danfoss is a world leader within production
More informationFlow sharing control block in mono block / sandwich plate design M6-15
Flow sharing control block in mono block / sandwich plate design M6-15 RE 64321 Edition: 01.2015 Replaces: 05.2012 Size 15 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420
More informationFixed Plug-In Motor A2FE
Fixed Plug-In Motor 2FE RE 91 008/09.07 1/16 Replaces: 04.05 echnical data sheet Series 6 Sizes Nominal pressure/peak pressure 28 to 180 400/450 bar 250 and 355 350/400 bar Open and closed circuits Contents
More informationFixed Displacement Motor A2FM
rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97
More information