Compact Nitrogen Gas Springs / 90.60N Series
|
|
- Melinda Beverly Anderson
- 5 years ago
- Views:
Transcription
1 Catalog No. C09112 Compact / 90.60N eries
2 90.60 / 90.60N eries 90.60N ton / 5 kn ø x R1 C L ø44.5 G 1/8 Port 2 x 12.5 Deep Force Graph FORCE (dan) Based on charge of 150 bar 471 dan TRAVEL (%) FORCE (kgf) 480 kgf MAXIMUM TRAVEL 90% RO - Basic Model Bottom Radius Groove On-Contact Pressure Max Force* C L Force Increase ** Weight Model inch dan dan mm ±0.25 % kg (kgf) (kgf) 90.60N E N E N E N E N E N E N E (480) (644) N E N E N E N E N E % troke Recommended Based on maximum recommended travel, 90% stroke On-Contact Force bar MPa dan kgf DADCO.UA fax
3 Mount Options 90.60N ton / 5 kn / 90.60N eries B B ø70.7 Bolt Circle x 23 ø B Ordering Example: Model troke Mount Operating ystem Charging Pressure (bar) 90.60N E010 B19 C 150 Part Number RO: Radius Groove C: elf-contained F: Open Flow Fitting 15~150 bar (1.5~15 MPa) When not specified, default is 150 bar (15 MPa) Mount Only: DADCO.UA fax
4 90.60 / 90.60N eries 90.60N ton / 7.5 kn ø x R1.5 C L ø50.0 G 1/8 Port 2 x 12.5 mm Deep Force Graph FORCE (dan) Based on charge of 150 bar 732 dan TRAVEL (%) FORCE (kgf) MAXIMUM TRAVEL 90% 746 kgf RO - Basic Model Bottom Radius Groove Model On-Contact Max Force Force Pressure C L Increase** Weight inch dan dan mm ±0.25 % kg (kgf) (kgf) 90.60N E N E N E N E N E N E N E (746) (1111) N E N E N E N E N E % troke Recommended Based on maximum recommended travel, 90% stroke On-Contact Force bar MPa dan kgf DADCO.UA fax
5 Mount Options 90.60N ton / 7.5 kn / 90.60N eries B B ø80 Bolt Circle x 56.6 ø B Ordering Example: Model troke Mount Operating ystem Charging Pressure (bar) 90.60N E010 B19 C 150 Part Number RO: Radius Groove C: elf-contained F: Open Flow Fitting 15~150 bar (1.5~15 MPa) When not specified, default is 150 bar (15 MPa) Mount Only: DADCO.UA fax
6 90.60 / 90.60N eries ton / 15 kn ø x R2.5 C L ø75 G 1/8 Port Force Graph FORCE (dan) Based on charge of 150 bar 1530 dan FORCE (kgf) kgf MAXIMUM TRAVEL (%) TRAVEL 90% 28.3 RO - Basic Model Bottom Radius Groove 13 Deep ø40 Model On-Contact Max Force Force Pressure C L Increase** Weight mm dan dan mm ±0.25 % kg (kgf) (kgf) (1555) (2225) % troke Recommended Based on maximum recommended travel, 90% stroke On-Contact Force bar MPa dan kgf DADCO.UA fax
7 Mount Options ton / 15 kn / 90.60N eries B B MOUNT FROM TOP OR BAE x M x M M x B B ø x M10 ø104 Bolt Circle 29 4 x M Ordering Example: Model troke Mount Operating ystem Charging Pressure (bar) B11 C 150 Part Number RO: Radius Groove C: elf-contained F: Open Flow Fitting 15~150 bar (1.5~15 MPa) When not specified, default is 150 bar (15 MPa) Mount Only: DADCO.UA fax
8 90.60 / 90.60N eries ton / 30 kn ø x R2.5 C L Force Graph FORCE (dan) Based on charge of 150 bar 2945 dan TRAVEL (%) FORCE (kgf) MAXIMUM TRAVEL 90% 3005 kgf ø95 G 1/8 Port Deep ø60 RO - Basic Model Bottom Radius Groove Model On-Contact Max Force Force Pressure C L Increase** Weight mm dan dan ±0.25 % kg (kgf) (kgf) (3005) (4575) % troke Recommended Based on maximum recommended travel, 90% stroke On-Contact Force bar MPa dan kgf DADCO.UA fax
9 Mount Options ton / 30 kn / 90.60N eries B B MOUNT FROM TOP OR BAE x M x M M 92 x B B ø x M12 ø130 Bolt Circle 33 4 x M Ordering Example: Model troke Mount Operating ystem Charging Pressure (bar) B11 C 150 Part Number RO: Radius Groove C: elf-contained F: Open Flow Fitting 15~150 bar (1.5~15 MPa) When not specified, default is 150 bar (15 MPa) Mount Only: DADCO.UA fax
10 90.60 / 90.60N eries Technical Data CAUTION Do NOT attempt maintenance on spring until internal pressure is exhausted. Charging Medium: Charging Pressure: Operating pecifications Nitrogen Gas bar Operating Temperature: -6 C 71 C Maximum peed: 0.5 m/sec 90% * 0.9 F.1 F.3 Provide troke Reserve DADCO gas springs will permit travel of the full nominal stroke; however, at least a 10% stroke reserve is recommended to achieve optimal performance (F.1 and F.2). Avoid ide Loading A misaligned press or die can cause side loading that increases wear on the bearing, seal, and piston rod (F.4). Therefore, avoid side loading when possible (F.3). Rod End Thread The end of the piston rod has a construction thread intended for assembly and disassembly purposes only, and should never be used to mount or secure the gas spring (F.4). Die vibration and/or misalignment will damage the spring. > * 0.9 F.4 >1 F.2 100% F.5 F.7 F.9 Converting from elf-contained mode to Linked mode Remove Port Plug Remove port plug (C.1). Protect From Fluids Direct contact with certain die lubricants and cleaners should be avoided (F.6). Protect gas springs by providing adequate drainage in gas spring pockets (F.5). Discharging elf-contained Gas pring The DADCO Pressure Analyzer ( ), allows for charging, discharging and gauging of the pressure in DADCO gas springs (F.7). For information on completely exhausting the gas spring see below. Recharging elf-contained Gas pring Hold the spring vertically at all times during filling. Never compress the gas spring in a vice or clamp outside of the die or application as damage to the gas spring can result (F.8). Never fill a gas spring unless the rod is in the fully extended position (F.10). Thread the T-handle (90.3.1, ), into the rod end and depress the valve stem with the Valve Bleed Tool ( ) or Port ervicing Tool (90.3.8). Pull the rod cartridge assembly up until it is seated firmly against the retaining ring (F.9). Remove the T-handle from the rod and charge the gas spring to the desired pressure. Contact DADCO for more information. Exhausting the pring Keeping face and hands clear of the port depress the valve stem using the Valve Bleed Tool ( ) shown in (C.2). After all the gas pressure is exhausted, be sure that the piston rod will retract into the tube manually. If not, try depressing the valve stem again. If still unsuccessful TOP and contact your DADCO ervice Representative. Remove Compact or Cartridge Valve Remove the Compact Valve (90.260) or Cartridge Valve (90.265) by unscrewing it using the Port ervicing Tool (90.3.8) shown in(c.3). Ready to Pipe Install a port adapter into the open G 1/8 port, (C.4). C DADCO.UA fax Port Plug C.1 C.2 F.6 F.8 F.10 C.4 Port Adapter
Catalog No. C Super Compact Nitrogen Gas Springs. SC Series
atalog No. 09101 uper ompact Nitrogen Gas prings eries uper ompact Nitrogen Gas prings Introduction DADO produces top quality products at competitive prices and provides a superior level of customer service.
More informationCatalog No. C09101B. SC Series. Super Compact Nitrogen Gas Springs PED 2014/68/EU COMPLIANT
atalog No. 09101B uper ompact Nitrogen Gas prings eries PED 2014/68/EU OMPIANT uper ompact Nitrogen Gas prings Introduction DADO produces top quality products at competitive prices and provides a superior
More informationPED 2014/68/EU COMPLIANT. Full and Compact Height Nitrogen Gas Springs Series Full Height / Matches ISO Standards
atalog No. 17102 Full and ompact Height 90.10 / 90.8 eries 90.10 eries Full Height / Matches IO tandards 90.8 eries ompact Height Alternative PED 14/68/EU OMPIANT Introduction The global leader in nitrogen
More informationPED 97/23/EC COMPLIANT. Full and Compact Height Nitrogen Gas Springs Series Full Height / Matches ISO Standards
atalog No. 10108A Full and ompact Height 90.10 / 90.8 eries 90.10 eries Full Height / Matches IO tandards 90.8 eries ompact Height Alternative PED 97/23/E OMPIANT 2 Introduction The global leader in nitrogen
More informationCatalog No. C12119B. Nitrogen Gas Spring Lifters. Lifters for Single-Point, Multi-Point and Rail Lift Applications
atalog No. 12119B Nitrogen Gas pring Lifters L eries Lifters for ingle-point, Multi-Point and Rail Lift Applications Nitrogen Gas Lifters Introduction High Quality onstruction The global leader in nitrogen
More informationCatalog No. C Gestamp Specific Selected Products PED 2014/68/EU COMPLIANT
atalog No. 15114 PED 2014/68/EU OMPIANT Introduction The global leader in nitrogen gas spring technology DADO produces top quality products at competitive prices and provides a superior level of customer
More informationø19 to 38mm ø19 to 150mm ø25 to 150mm ø25 to 120mm ø38 to 165mm
TBLE OF CONTENT USEFUL INFORMTIONS MICRO GS SPRINGS HIGH POWER GS SPRINGS SUPER COMPCT GS SPRINGS LOW PROFILE GS SPRINGS ISO GS SPRINGS CONNECTION OF GS SPRINGS CONNECTION MNIFOLD BLOCKS MNIFOLD DISTRIBUTORS
More informationCatalog No. C11107A. Extreme Condition Solutions PED 97/23/EC COMPLIANT
Catalog No. C11107A PED 97/23/EC COMPLIANT Nitrogen Gas Spring Introduction The global leader in nitrogen gas spring technology DADCO produces top quality products at competitive prices and provides a
More informationø19 to 38mm ø19 to 150mm ø25 to 150mm ø25 to 120mm ø38 to 165mm
TBLE OF CONTENT USEFUL INFORMTIONS MICRO GS SPRINGS HIGH POWER GS SPRINGS SUPER COMPCT GS SPRINGS LOW PROFILE GS SPRINGS ISO GS SPRINGS CONNECTION OF GS SPRINGS CONNECTION MNIFOLD BLOCKS MNIFOLD DISTRIBUTORS
More informationCatalog No. C12118E PED 2014/68/EU COMPLIANT. Ideal for Coil Spring Replacement
atalog No. 12118E Micro Micro Series PED 2014/68/EU OMPIANT Ideal for oil Spring Replacement Micro Series Introduction DADO produces top quality products at competitive prices and provides a superior level
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
More informationAir Cylinder. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing. Symbol Tube material Polyurethane Soft nylon
Air Cylinder Double Acting: ø/ingle Acting pring Return: ø2., ø Variations eries tandard B Basic mm Double acting ingle acting ingle rod ingle rod pring return 2. tandard stroke,, 1,,,, 1, How to Order/Double
More informationT2 Mini Series. Mini Nitrogen Gas Springs. One-half inch diameter T2-50. Three-quarter inch diameter T2-90. One-inch diameter T2-180
T2 Mini eries Mini Nitrogen Gas prings One-half inch diameter T2-50 Three-quarter inch diameter T2-90 One-inch diameter T2-180 tripper springs with special model conforming to GM Global tandard Table of
More informationSuper Compact CU4 420 CU
Product eries Gas prings including tandard Mounts uper ompact U4 420 U4 18300 Edition 1.2012 opyright KALLER Would you like to order this product? All available information at. FEATURE AND BENEFIT UPER
More informationDESIGN 2 -TITE Nitrogen Gas Springs
READY THE INNOVATOR OF OUR INDUSTRY SM DESIGN 2 -TITE Nitrogen Gas Springs They truly are... Better by Design DESIGN 2 -TITE - Expanded & Improved We are proud to offer our new and expanded line of nitrogen
More informationDESIGN-TITE Nitrogen Gas Springs. They truly are... Better by Design
DESIGN-TITE Nitrogen Gas Springs They truly are... Better by Design DESIGN-TITE - Expanded & Improved We are proud to offer our new and expanded line of nitrogen gas springs. Now the manufacturer of the
More informationDESIGN-TITE Nitrogen Gas Springs. They truly are... Better by Design
DESIGN-TITE Nitrogen Gas Springs They truly are... Better by Design DESIGN-TITE - Expanded & Improved Index We are proud to offer our new and expanded line of nitrogen gas springs. Now the manufacturer
More informationLS100L Battery-powered Punch Driver
OPERATION MANUAL Serial Number GATOR LS100L Battery-powered Driver Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
More informationø19 to 38mm ø19 to 150mm ø25 to 150mm ø45 to 120mm ø38 to 165mm
TBLE OF COTET USEFUL IFORMTIOS MICRO GS SPRIGS HIGH POWER GS SPRIGS SUPER COMPCT GS SPRIGS LOW PROFILE GS SPRIGS ISO GS SPRIGS COECTIO MIFOLD BLOCKS DISTRIBUTEURS MIFOLD COMPCT COTROL BLOCKS VISUL PRESSURE
More informationOperating Instruction Manual For EP-100WC Compression Tool with Parts List
Operating Instruction Manual For EP-100WC Compression Tool with Parts List EP-100WC SPECIFICATIONS SPECIFICATIONS Output: 100 ton Weight: 96 lbs. Size: 7-1/2 W x 14 H Die Style: HA100 Series Ram Stroke:.98
More informationHydraulic cylinders are devices which convert fluids power into mechanical force or motion. This force or motion will be in a straight line.
HYDRAUC CYNDR Hydraulic cylinders are devices which convert fluids power into mechanical force or motion. his force or motion will be in a straight line. C--1-0 Graphic ymbol C eries C- standard hydraulic
More informationWARNING. it means the information that follows will help avoid damage to the steering gear.
AFETY NOTICE TOP! Before you begin, please read this manual carefully. The repair procedures outlined in this manual are for repairing the heppard Integral Power teering Gear. To ensure safe and reliable
More informationProdukt bild. Bild. Controllable Gas Springs KF2. Product Series Delayed Return Units. Edition KALLER
Product Series Delayed Return Units Controllable Gas Springs KF Edition. 06 KALLER Bild Produkt bild Would you like to order this product? All available information at. ler.com. CONTENTS GENERAL INTRODUCTION....
More informationCam width 72 Long Stroke
71 Order Working force [ kn (tonf) ] Grade 1,000,000 1,000,000 0,000 strokes strokes strokes Standard Center Center Sky 24.(2.) 36.8(3.7) 49.0(.0) Catalog No. W o K o Spring o Option VACSL o o ISO VACYL
More informationCS2 Series Controllable Gas Springs
Table of Contents CS Springs Page Introduction... Standard Lock, CS... Positive Lock System, CS + PS...4 Applications...6 Standard Lock, CS...6 Positive Lock System, CS + PS...7 Application Request Form...9
More informationDual Rod Cylinder: Double Rod Type. How to Order. Load voltage Auto switch model Perpendicular In-line 3-wire (NPN equivalent) Y7NWV Y7NW 5 V, 12 V
Dual Rod Cylinder: Double Rod Type eries CXW ø, ø, ø, ø, ø2, ø32 CX W L How to Order 0 Y7W M L Double rod type earing type lide bearing all bushing bearing ore size/troke ore size,,,,,,,,,,,,,,, 2, 32,
More informationAir-hydro Converter CCT Series. Application Example. Multipoint intermediate stops
Air-hydro Unit eries Converting pneumatic pressure to hydraulic pressure (equivalent pressure) solves cylinder problems occurring due to the compression characteristics of pneumatic pressure. Constant-speed
More informationCam width 58 Short Stroke
1.kN Cam width Short Stroke 697 Order Working force [ kn (tonf) ] Grade 1,000,000 1,000,000 0,000 strokes strokes strokes Standard Center Center Sky 18.6(1.9) 27.9(2.8) 37.2(3.8) Option Option Code SC
More informationRam Cushions and Pressure Parallels Dynamic Solutions For A Global Market
Nitro-Dyne Ram Cushions and Pressure Parallels APPROVED 97/23/EC Dynamic Solutions For A Global Market Nitro-Dyne Ram Cushions and Pressure Parallels Table of Contents Page Introduction...2 The Advantages...3
More informationCheck Valve AP64 P.149. Vacuum Generator Vacuum Generator Module Vacuum Generator Module AP7 & 70 AP71 AP72. Flow Switch Flow Switch (For high flow)
Check Valve eries Check Valve AP64 P.149 Vacuum Generator Vacuum Generator Vacuum Generator Module Vacuum Generator Module Flow witch Flow witch Flow witch (For high flow) eries AP7 & 7 AP71 AP72 eries
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
Air Cylinder eries CJ1 ouble Acting: ø/ingle Acting, pring Return: ø2., ø eries Variations tandard eries CJ1 eries Action ouble acting ingle acting Mounting style asic style ingle rod ingle rod pring return
More informationPin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
More informationPower Clamp Cylinder
Power Clamp Cylinder eries New pecial CK /M(D)UK For France CLKZ1R For Europe For North merica CKZ2N MK2T/MK2/MK C(L)KQ For sia CLK2 13 Toggle link mechanism Maintains secure and powerful support. Proximity
More informationParallel Style Air Gripper
INFRMATIN Parallel tyle Air Gripper With Dust Cover Model variations with excellent dust proof and drip proof dust cover are expanded. MHZL2 Long stroke type MHZL2 series ø1, ø16 and ø2 with dust cover
More informationCheck Valve Series AK How to Order
High flow capacity Low cracking pressure:.2mpa Check Valve Series AK How to Order N AK 2 2 Compact and light weight Area Code Japan, Asia, Nil Australia, UK N U.S.A. 2 4 6 Body size /4 /2 /8 2 /4 3 3/8
More informationCJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1.
eries -/- / CJ2 ir cylinder / ø, ø, ø ow to Order Clean eries Vacuum suction type Cushion Rubber bumper (tandard) ir cushion (except ø) - C D J 2 L - R 7B 21 - C D J 2 L - R 7B Copper, fluorine and silicon-
More informationADDITIONAL DOCUMENTATIONS FOR PUMP, MODEL F
SPECIFICATIONS AIRMIX PUMP model 20-25 Flowmax Manual : 0304 573.027.212 Date : 18/04/03 ADDITIONAL DOCUMENTATIONS FOR PUMP, MODEL 20-25 F SPARE PARTS : Wall mounting pump (doc. 573.122.050) Air motor
More informationFixed displacement radial piston pump
Fixed displacement radial piston pump RE 11263/05.13 Replaces: 10.05 1/16 Type R4 izes 1.60 to 20.00 cm 3 Component series 3X Maximum operating pressure 700 bar H7322 2R4-3X/4,00-700RK01M01+AZF8 H7321
More informationTOX -Powerpackage: The complete drive family for pressforces from kn
T -owerpackage: The complete drive family for pressforces from 2-2000 k The T -owerpackage is available with different pressforces, strokes and structural shapes. election criterions: 1) ressforce required
More informationAxial Piston Fixed Pump A17FNO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A17FNO RE 91510/03.10 1/12 Data sheet eries 10 ize 125 Nominal pressure 250 bar
More informationDesign principle / Technical features
Design principle / Technical features Components and construction groups IV 4 Stationary opening unit - Construction group IV. Non-rotating distributor. Non-rotating housing. Housing, axial movable Power
More informationPin Cylinders. Series CJP2/CJP. 2 auto switches can even be mounted on a cylinder with ø4 bore size (5 mm stroke). One-touch fitting can be connected.
Pin ylinders eries JP/JP auto switches can even be mounted on a cylinder with ø ( mm stroke). uto switch One-touch fitting can be connected. (Panel mount type) ø One-touch fitting, miniature fitting, and
More informationPin Shift Cylinder. High Precision. Position Reproducibility CKQ G-X2370. Deflection ±0.1 mm or less INFORMATION. For High Precision Positioning
For High Precision Positioning Pin Shift Cylinder INFORMATION CKQG-X2370 (Built-in standard magnet) CKQP-X2371 (Built-in strong magnet) Rod end ø32, ø, ø50 ø50 High Precision Deflection ±0.1 mm or less
More informationSuitable for conveyor lines without an air supply
Contact our sales office regarding a delivery date or a price since this is a special model. P107X-011E P: OW P.G.Information (pecialized product) Electric topper Cylinder LEBQ eries MC CORPORATION 4-14-1,
More informationZoom and Print Options
Vehicle» Engine, Cooling and Exhaust» Engine» Cylinder Head Assembly» Rocker Arm Assembly» Service and Repair» Procedures» Cam, Valve Springs & Seals, Cam Roller Follower and Lifter Camshaft, Valve Springs,
More informationADDITIONAL DOCUMENTATIONS FOR PUMPS, MODEL F and FT
SPECIFICATIONS STAINLESS STEEL AIRMIX PUMPS model 20-50 F and 20-50 FT Manual : 0309 573.032.212 Date : 01/09/03 ADDITIONAL DOCUMENTATIONS FOR PUMPS, MODEL 20-50 F and 20-50 FT SPARE PARTS : Wall mounted
More informationSRK12KX Battery-powered Crimping Tool
OPERATION MANUAL Serial Number SRK12KX Battery-powered Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 52080066
More informationTLD 2500 Tube Testing Guns
Phone: (713) 766-1589 Toll Free: (866) 799-2007 Plugging Gun Air Injection Gun Operator s Manual TLD 2500 Tube Testing Guns Quick and safe pressure testing of 7 to 8 tubes per minute! Online: www.usaindustries.com/manual/tld2500
More informationValve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries /, 12,,,,,,, 3,, eries Variations eries eries Action Built-in magnet With air cushion tandard variations Built-in One-touch fitting With auto switch With strong scraper Page CX ouble acting -- CY
More informationMOREHOUSE INSTRUMENT COMPANY, INC. 60,000 LBS CAPACITY AIRCRAFT PART NUMBER SCALE S FORCE CALIBRATION PRESS PART NO.
INDEX 1. GENERAL SPECIFICATION AND DRAWING 804000-03... 2 2. ASSEMBLY INSTRUCTIONS... 5 3. OPERATING INSTRUCTIONS... 6 4. MAINTENANCE INSTRUCTIONS... 7 5. CERTIFICATE OF CAPACITY LOAD TEST AND OVERLOAD...
More informationADDITIONAL DOCUMENTATIONS SPARE PARTS
SPECIFICATIONS AIRSPRAY PNEUMATIC PUMP model 04-120 Manual : 0311 573.035.212 Date : 20/11/03 ADDITIONAL DOCUMENTATIONS SPARE PARTS Wall mounted unit Doc. 573.072.050 Fluid section Doc. 573.049.050 Air
More informationBRAKE E
8-1 GENERAL...8-2 SPECIFICATIONS...8-6 COMPONENTS...8-7 FRONT BRAKE...8-12 DISASSEMBLY INSPECTION REASSEMBLY (Pn1, Cu2 3 TON SERIES)...8-12 DISASSEMBLY INSPECTION REASSEMBLY (Pn2 3 TON SERIES)...8-17 BRAKE
More informationEK1240KL Battery-powered Crimping Tool
OPERATION MANUAL GATOR EK1240KL Battery-powered Crimping Tool Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
More informationClean & Powerful. Kubota Original DI Engine with CRS and DPF Muffler
KUBOTA EXCAVATOR Clean & Powerful Kubota KX080-4 excavator delivers all the power you need while going easy on the environment thanks to new direct injection diesel engine with Coon Rail System (CRS) and
More informationHydraulic Diaphragm type Metering Pump
Hydraulic Diaphragm type Metering Pump For Metering Injection in Petr Hydraulic diaphragm metering pumps have both the high-pressure and high-precision features of plunger type pumps and zero liquid leakage
More informationPistol Grip Battery-powered Pressing Tool
OPERATION MANUAL Serial Number Pistol Grip Battery-powered Pressing Tool PSTLPRESS-TOOL32kN Read and understand all of the instructions and safety information in this manual before operating or servicing
More informationSeries MHK2. Wedge Cam Operation Slide Guide Air Gripper (2 Finger)
Wedge Cam Operation lide Guide Air Gripper (2 inger) ø2, ø, ø2, ø2 oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials tandard: Carbon steel Optional:
More informationSERIES1 NOZZLE CYLINDER REPAIR PROCEDURES
THE FOLLOWING REPAIR PROCEDURE ENCOMPASSES THESE PHD ML UNITS : - ML309435, ML310142, ML310153, ML310254, ML310295, ML310427, 1) Refer to individual ML exploded view for actual part numbers. 2) Not all
More informationBench Press Max Capacity: 16.5 Ton
R SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-627 Fax: (800) 955-8329 Order Entry: (800) 533-627 Fax: (800) 283-8665 International Sales:
More informationEnergy Saving Hydraulic PLAIMM TB series
TB eries Energy aving Hydraulic PLAIMM TB series Back to the Basic 2 Woojin Plaimm TB serise 3 Energy aving Hydraulic PLAIMM TB series TB series is the newly launched energy saving hydraulic type injection
More informationWorkshop manual 5018 PDS Product Exploded View Disassembly & Assembling. Shock absorber 5018 PDS OEM Shock absorber 5018 PDS /2002
Shock absorber 5018 PDS OEM 2000 Introduction 2 Exploded view 3 Disassembly shock absorber 4 Disassembly piston-rod 11 Disassembly adaptor DU-bush 15 Assembling adaptor DU-bush 17 Assembling piston-rod
More informationDYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS
Cam Units DYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS CAM Units v9.indd 1 6/18/2015 4:59:50 PM Introduction Dyne-A-Cam Series IDEAL FOR PIERCING, FLANGING, CUTTING AND
More informationThe Winnig Force PRESS BRAKES. Perfect Precision Deep And Fast Bending Efficient Winning Elegant Design
The Winnig Force AD ERII PRE BRAKE Perfect Precision Deep And Fast Bending Efficient Winning Elegant Design 2 The Winning Force As a total supplier for sheet metal manufacturing with almost 60 years of
More informationWDV-2 2-way normally closed poppet with air pilot. When valve closes a spring biased internal piston draws back a small volume on outlet side (approx.
PV-1 MPS-2P SPECIALTY COMPONENTS Miniature pulse valve, a normally open 3-way valve that closes shortly after being pressurized and remains closed until supply pressure is exhausted and repressurized.
More informationFree Mount Cylinder. Series CU. A space saving air cylinder with multiple surfaces for mounting. The series consist of an array of cylinders.
Mounting Axial mounting (Body tapped) Free Mount Cylinder eries CU Double Acting ingle Rod/Double Rod ingle Acting pring Return/Extend, Non-rotating Rod ø, ø, ø1, ø, ø, ø A space saving air cylinder with
More informationPermanent Gauging Blocks Installation Instructions
DESCRIPTION Permanent Gauging Blocks Installation Instructions The HYDAC Permanent Gauging Block is designed to fit the following types of HYDAC accumulators: bladder, diaphragm (with HYDAC gas valve version
More informationBattery Operated Compression Tool
ECO-50 Battery Operated Compression Tool Ram stroke : 15 mm Applicable Hex Compression : Max. 150mm2 Cu Lugs 52 kn 397 (L) x 79 (H) x 70 (W) mm 2.3kg (less battery) 3.1kg (with battery) ECO-50 The ECO-50
More informationOPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE HIGH PRESSURE MATERIAL REGULATOR
OPERATOR MANUAL INCLUDING: OPERATION, INTALLATION & MAINTENANCE HIGH PREURE MATERIAL REGULATOR RELEAED: 7-20-14 (REV. A) READ THI MANUAL CAREFULLY BEFORE INTALLING, OPERATING OR ERVICING THI EQUIPMENT.
More informationPackless Valves. Instrument / Analyzer Products. Catalog 4515/USA April 2006
Packless Valves Instrument / Analyzer Products Catalog 4515/UA April 2006 NV55 eries Catalog 4515/UA NV55 eries High Flow Diaphragm Valves Parker Hannifin Corporation s presents the NV55. The NV55 is an
More information.75 Ton to 7.5 Tons Nitrogen Gas Springs ( 7.5 kn to 75 kn ) IS Series. International Standards NAAMS Standards
N-FORCER CER.75 Ton to 7.5 Tons Nitrogen Gas Springs ( 7.5 kn to 75 kn ) IS Series International Standards NAAMS Standards Detachable mounts shown Welded mounts also available Die, Mold & Automation Components,
More informationStandard Specifications. Fluid Standard specifications. VH600 Ambient and fluid temperature Operating angle Lubrication. Optional Specifications
Hand Valve Series Standard Specifications Fluid Standard specifications Max.operating,, pressure Ambient and fluid temperature Operating angle Lubrication Air.5MPa.MPa MPa 5 to C (No freezing) 9 Not required/when
More informationM-5000/5700 Instant Hot Water Maker
M-5000/5700 Instant Hot Water Maker Operations Manual for Strahman M-5000/5700 Unit, M-70 Spray Nozzle and Soft Seal Piston Valve Last Updated: July 1, 2009 Strahman Valves, Inc. USA Headquarters 2801
More informationL 16 / 24. Marine Diesel Engine. Main Specification. Engine Type rpm 1,000 1,200
L 16 / 4 L 16 / 4 rpm 1,000 1,00 Bore mm 160 Stroke mm 40 Stroke/Bore ratio 1.5 : 1 cm 01 Swept volume per Cyl. liter 4.8 Compression ratio 15. : 1 Mean effective pressure bar.4 0.7 Max. combustion pressure
More informationSD Bendix MV-3 Dash Control Module DESCRIPTION. Bottom View
SD-03-3415 Bendix MV-3 Dash Control Module MOUNTING PLATE MOUNTING HOLES (4) Dual Circuit SUPPLY Check VALVE AUXILIARY PORT (Optional) delivery DESCRIPTION secondary supply Trailer delivery FIGURE 1 -
More informationBench Press. Form No Parts List & Operating Instructions for: Max. Capacity: 16.5 Ton
655 Eisenhower Drive Owatonna, MN 55060 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-627 Fax: (800) 955-8329 Order Entry: (800) 533-627 Fax: (800) 283-8665 International Sales: (507) 455-7223 Fax:
More informationCompact Gas Springs. subject to alterations. f199
Compact Gas Springs 2 11936 8 1 f199 Compact Gas Springs for small displacement and high forces Mounting variations 2490.12.00420. Pedestal foot clamp for 2490.12.00420 Clamping flange VDI 3003 for 2480.21./2490.12.00420
More information2-Circuit Axial Piston Fixed Pump A18FDO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice 2-Circuit Axial Piston Fixed Pump A18FDO E 91540/03.10 1/12 eplaces: 06.09 Data sheet eries 10 ize 63,
More informationCordless Screwdriver
ENGLISH Cordless Screwdriver MODEL 6796D MODEL 6796FD MODEL 6797D MODEL 6797FD MODEL 6798D MODEL 6798FD 00260 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before
More informationHydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic screw-in cylinder, single action Operating pressure max. 350 bar / min 100 bar These hydraulic crew-in cylinder are single acting and with spring retraction. They can
More informationValve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-
More informationFlowrite EA 599 Series SKD Electronic Valve Actuator 24 Vac Proportional Control
Flowrite EA 599 Series SKD Electronic Valve Actuator 24 Vac Proportional Control Document No. 55-8P25 EA 599-4 EA379R Description The Flowrite EA 599 Series SKD Electronic Valve Actuator requires a 24
More informationTiming Belt. Removal 6A 27 ENGINE MECHANICAL (6VD1 3.2L)
Removal 1.Disconnect battery ground cable. 2.Remove air cleaner assembly. 3.Remove radiator upper fan shroud from radiator. 4.Move drive belt tensioner to loose side using wrench then remove drive belt.
More informationSeries 111 Accumulator Product Information
Series 111 Accumulator Product Information l Model 111.11 Model 111.12 011-553-304 B Copyright information Trademark information Contact information Publication information 2000 MTS Systems Corporation.
More informationSD Bendix SR-5 Trailer Spring Brake Valve DESCRIPTION PORTS. 1-1/2" or 3/4" NPT Spring Brake Reservoir Mounting (SPR BK RES)
SD-03-4516 Bendix SR-5 Trailer Spring Brake Valve PRESSURE PROTECTION SR-5 IDENTIFICATION HOLE 1/4 NPT (2) COVER* FIGURE 1 DESCRIPTION 1/4 NPT TRAILER 1/4 NPT SR-5 TRAILER *SHOWN WITH OPTIONAL ANTI-COMPOUNDING
More informationCJ2-Z. Cushion. Rubber bumper (Standard) Air cushion
eries ow to Order 1/ /22 J2 ø1, ø ir ylinder Ro lean series 1 ushion Rubber bumper (tandard) ir cushion 1 J 2 L R M9W 21 J 2 L R M9W opper, fluorine and siliconefree + Low particle generation 21 22 Vacuum
More informationHydraulic cylinders Tie rod design. Type CD70 / CG70. Features. Contents
Hydraulic cylinders Tie rod design Type CD / CG Features types of mounting Piston Ø (ØAL)... mm Piston rod Ø (ØMM) 12... 1 mm Stroke length up to 3 m Project planning software Interactive Catalog System
More informationINSTRUCTIONS & MAINTENANCE SHEET PORTABLE BATTERY HYDRAULIC POWERPACK HAB1102
INSTRUCTIONS & MAINTENANCE SHEET PORTABLE BATTERY HYDRAULIC POWERPACK HAB1102 LARZEP, S.A. Avenida Urtiaga, 6 48269 MALLABIA, SPAIN Tel. +34 943 171200 Fax. +34 943 174166 e-mail: sales@larzep.com www.larzep.com
More informationDT34 and DT54 Series Rotary Sprinklers
DT34 and DT54 Series Rotary Sprinklers Installation & Service Instructions Introduction The DT34 and DT54 series full-circle rotary sprinklers are designed specifically for golf course applications. Manufactured
More informationWorkshop manual 4618 BAVP 85 SX. Product Exploded View Disassembly & Assembling. Schok absorber 4618 BAVP 85 SX
Schok absorber Introduction 2 Exploded view 3 Disassembly shock absorber 4 Disassembly piston rod 12 Assembling piston rod 23 Disassembly adaptor DU-bush 33 Assembling adaptor DU-bush 36 Disassembly tube
More informationTOPAZ Service Guide. Full Service
TOPAZ Service Guide Full Service SERVICE OVERVIEW This manual will guide you step by step performing an air service to your Topaz. Please follow each instruction carefully to achieve the best and safest
More informationISO Technical details
Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke
More informationHC-5010-R Operator s Manual
HC-5010-R Operator s Manual Hand Swaging Tool Battery-Powered SPECIFICATIONS Swages aluminum and copper oval sleeves for 3/32, 1/8, 3/16, 1/4 and 5/16 sizes wire rope. CRIMPING TOOL Output: 6 ton Weight:
More information/2017. Hollow piston cylinder, single-acting spring clamping hydraulic unclamping
, single-acting spring clamping hydraulic unclamping Applications: un-pressurized long-term clamping of dies or fixtures on press beds and rams when the space available is limited T-bolt Spring clamping
More informationCompact Gas Springs. subject to alterations. f199
Compact Gas Springs 2 11936 8 1 f199 Compact Gas Springs for small displacement and high forces Mounting variations 2490.12.00420. Pedestal foot clamp for 2490.12.00420 Clamping flange VDI 3003 for 2480.21./2490.12.00420
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationMechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.
Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc
More informationINSTRUCTIONS & MAINTENANCE SHEET PORTABLE BATTERY HYDRAULIC POWERPACK HAB1101
INSTRUCTIONS & MAINTENANCE SHEET PORTABLE BATTERY HYDRAULIC POWERPACK HAB1101 LARZEP, S.A. Avenida Urtiaga, 6 48269 MALLABIA, SPAIN Tel. +34 943 171200 Fax. +34 943 174166 e mail: sales@larzep.com www.larzep.com
More informationPRESS BRAKES. Designed for Simplicity, Safety and Precision. The Winnig Force. Perfect Precision Deep And Fast Bending. Winning Elegant Design
The Winnig Force AD ERIE PRE BRAKE Designed for implicity, afety and Precision Perfect Precision Deep And Fast Bending Efficient Winning Elegant Design The Winning Force 2 As a total supplier for sheet
More informationFront Fork Disassembling and Assembling RM-Z250L6. KAYABA Pneumatic Spring Front Fork PSF2
Front Fork Disassembling and Assembling RM-Z250L6 KAYABA Pneumatic Spring Front Fork PSF2 RM-Z250L6 Front Fork Disassembling 1. Release air Release the air pressure by pressing the air valve with a screwdriver.
More informationGas springs an overview
Gas springs an overview SZ 8080.1. Ø Stroke in mm mm dan dan 5 10 13 15 25 38 50 63 75 80 100 125 160 200 19 100 160 25 200 320 32 350 560 38 500 800 50 1000 1600 63 1500 2400 75 2500 4000 95 4000 6400
More information