PED 2014/68/EU COMPLIANT. Full and Compact Height Nitrogen Gas Springs Series Full Height / Matches ISO Standards
|
|
- Nigel Robertson
- 6 years ago
- Views:
Transcription
1 atalog No Full and ompact Height / 90.8 eries eries Full Height / Matches IO tandards 90.8 eries ompact Height Alternative PED 14/68/EU OMPIANT
2 Introduction The global leader in nitrogen gas spring technology Introduction DADO produces top quality products at competitive prices and provides a superior level of customer service. Founded in 1958, DADO is the highest volume producer of gas springs for press tools. DADO s products are widely approved and used in global operations for many industries including metal stamping, automotive and plastic injection molding. ustomer atisfaction DADO s motto is Whatever It Takes To atisfy Our ustomers. DADO will assist in any way possible to ensure that customers are completely satisfied. DADO s salespeople and distributors are solutionoriented, product-knowledgeable and eager to assist customers. DADO s engineers are available to help customers with specific applications. Numerous Piping Options With DADO s, piping gas springs is easy because every necessary tool or component is readily available. For more information, refer to DADO s Nitrogen Gas pring inked ystem omponents atalog. Training and technical assistance are also offered by DADO. DADO s full height eries matches the IO tandard specifications and offers the widest choice of sizes, stroke lengths and accessories available. All international automotive standard mounts (welded and attachable) are offered, as well as legacy mounts for replacement of older springs, see pages 4-. DADO s compact 90.8 eries is 25 mm 50 mm ( ) shorter than IO tandard Nitrogen Gas prings. It is available in several models with stroke lengths up to 250 mm. an Diameter Model (mm) eries Overall ength (mm) 90.8 eries Overall ength (mm) Maximum Force on ontact x troke kn x troke kn x troke x troke kn x troke x troke kn x troke x troke + 95 kn x troke x troke kn x troke x troke kn x troke kn M For those instances when a customer prefers to have DADO provide a finished system, several options are available. A popular option, DADO s ectional Mounting ystem (M ) includes cylinders mounted to a M plate and linked using hose, fittings and a control panel. hipped ready to install, customers find the M to be a trouble free, cost-effective option. For additional information, refer to catalog 13106B. M-i Another option is the ectional Mounting ystem- Internal (M-i ). The M-i consists of an internally piped plate with mounted cylinders. DADO recommends using the M-i as a cost-effective alternative to traditional manifold systems. For more information, request catalog 13106B. Guaranteed ong ife In factory testing and field experience, the service life of DADO s Gas prings consistently exceeds one million strokes. This is supported by DADO s written One Year/One Million troke Gold Guarantee. ontact DADO for more information. High Quality onstruction DADO s Gas prings feature: a one-piece body (base-to-tube welding process verified ultrasonically); impact fatigue-resistant alloy steel super finished piston rod; rod cartridge with a proprietary doublelip rod seal; low friction rod bearings; a glass-filled, nylon guide ring on the piston retainer and special high temperature synthetic lubricant. The result of this combination is a superior design that ensures low friction, sealability and excellent wear characteristics essential for optimum gas spring life. 2 AD Templates DADO s entire product line is available on-line in solid models and 2D AD formats. For more information, visit our website, or contact DADO DADO.UA fax Warranty DADO warrants its products to be free from defects in workmanship or materials for a period of one year from date of manufacture.
3 Application Examples DADO offers a variety of mount options to meet specific customer applications. Installation and fastening of the gas springs should take into consideration load support, fastener selection and torque values. For additional information on installation requirements see page 23. ylinder and mount dimensions are shown on pages 4-. ød ød > /2 ød +.3 (.012) +.8 (.031) Bore < ød/2 Drain Hole TO Basic Model in a flat bottom pocket. The pocket must be bored with a flat bottom, or a spacer must be used to create a flat surface. TO Basic Model mounted inverted requires back-up to support the full load. Retain inverted cylinders tight in the pocket with the appropriate length cap screw to eliminate movement. > 25.4 (1.00) TO Basic Model mounted to a plate. inked cylinders require clearance for the hose and fittings. H ød H + d/2 B12/B312 mounts must be fastened to the bottom groove only. Back-up is required to support the full load. TFM/TW/B11 mounts may be attached from the top or base. Back-up is required to support the full load. NOTE: Mount from top only. B19/B319V/B26 mounts require back-up to support the load. > D+1 (.040) >.5 (.0) > ¾ ød +.3 (.012) +.8 (.031) Bore B21/B25 mounts must be fastened to the top groove only. The wire ring supplied with mounts supports the full load. TO Basic Model mounted in a horizontal pocket. Allow clearance in the rod pocket to avoid contacting the body of the cylinder during operation. Allow the rod to locate freely. M / M-i DADO offers customized ectional Mounting ystems (M and M-i ) which are fabricated to customer specifications, pressure tested and shipped ready to install. DADO M-i with (6) gas springs plumbed internally and connected to a control panel. DADO M with (4) gas springs linked using (Y-400) hose, fittings and a control panel DADO.UA fax
4 1.7 kn / 0.17 ton M6 ø12.47 Model Not Available in 90.8 eries R ø M6 ø x M6 12 Deep.47 Part No. mm inch IO standard stroke lengths TO Basic Model Force harts On-ontact Force psi lb FORE (lb.) Based on charge of 2175 psi 381 lb TRAVE (%) FORE (dan) 170 dan MAXIMUM REOMMENDED TRAVE 90% On-ontact Force bar dan Ordering Example: Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory TO harging Pressure: bar ( psi). When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is, self-contained DADO.UA fax
5 1.7 kn / 0.17 ton B B RF x M6 1/4 4 x M6 1/4 ø50 BOT IRE ø B B319V V x M6 1/ X M8x50 mm UPPIED Ordering Example: ylinder with Mount: B Mount Only: 250-RF DADO.UA fax
6 5 kn / 0.5 ton 4.16 R M8.787 ø ø TO Basic Model 2.08 G 1/8 ø x M8 12 Deep.47 Model Not Available in 90.8 eries Part No. mm inch IO standard stroke lengths Force harts 6 On-ontact Force psi lb Ordering Example: FORE (lb.) Based on charge of 2175 psi 1059 lb. Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory TRAVE (%) DADO.UA fax FORE (dan) 471 dan MAXIMUM REOMMENDED TRAVE 90% On-ontact Force bar dan TO harging Pressure: bar ( psi). When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is, self-contained.
7 5 kn / 0.5 ton B B B MOUNT FROM TOP OR BAE x M8 5/16 4 x M8 5/16 ø70.7 BOT IRE ø x M8 5/16 2 x M B B B319V V X M8x50 mm UPPIED x M8 5/ x M8 5/16 M Ordering Example: ylinder with Mount: B Mount Only: DADO.UA fax
8 R Force harts M8.787 On-ontact Force psi lb ø ø ø TO Basic Model Ordering Example: FORE (lb.) G 1/8 2 x M8 12 Deep kn / 0.75 ton Based on charge of 2175 psi 1655 lb. Part Number: Includes eries (90.10 or 90.8), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory TRAVE (%) DADO.UA fax FORE (dan) 736 dan MAXIMUM REOMMENDED TRAVE 90% Part No. mm inch IO standard stroke lengths ( only) 25 mm shorter! On-ontact Force bar dan TO harging Pressure: bar ( psi). When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is, self-contained
9 7.5 kn / 0.75 ton TFM Welded TW Welded TR2 Welded TNF1 Welded ø88.9 BOT IRE ø88.9 BOT IRE ø ø x M B B B B MOUNT FROM TOP OR BAE x M8 5/16 4 x M8 5/16 ø80 BOT IRE 0 4 x M8 5/ x M8 5/16 2 x M ø B B B319V V X M10x60 mm UPPIED x M8 5/16 M Ordering Example: ylinder with Mount: B Mount Only: DADO.UA fax
10 R x M8 12 Deep.47 Force harts M8 On-ontact Force psi lb Ordering Example: ø ø ø TO Basic Model FORE (lb.) ø kn / 1.5 ton G 1/8 Based on charge of 2175 psi 3432 lb. Part Number: Includes eries (90.10 or 90.8), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory TRAVE (%) DADO.UA fax FORE (dan) 1527 dan MAXIMUM REOMMENDED TRAVE 90% Part No. mm inch IO standard stroke lengths ( only) 25 mm shorter! On-ontact Force bar dan TO harging Pressure: bar ( psi). When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is, self-contained.
11 15 kn / 1.5 ton TFM Welded TW Welded TR2 Welded TNF1 Welded ø1.6 BOT IRE ø1.6 BOT IRE ø x M ø B B B B MOUNT FROM TOP OR BAE ø104 BOT IRE M 4 x M ø B B B319V V X M12x80 mm UPPIED x M10 M Ordering Example: ylinder with Mount: B Mount Only: DADO.UA fax
12 12 R x M8 12 Deep.47 Force harts M8 On-ontact Force psi lb Ordering Example: ø ø ø TO Basic Model FORE (lb.) ø kn / 3 ton G 1/8 Based on charge of 2175 psi 6619 lb. Part Number: Includes eries (90.10 or 90.8), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory dan TRAVE (%) DADO.UA fax FORE (dan) MAXIMUM REOMMENDED TRAVE 90% Part No. mm inch IO standard stroke lengths ( only) 25 mm shorter! On-ontact Force bar dan TO harging Pressure: bar ( psi). When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is, self-contained
13 kn / 3 ton TFM Welded TW Welded TR2 Welded TNF1 Welded ø139.7 BOT IRE ø139.7 BOT IRE ø x M ø B B B B MOUNT FROM TOP OR BAE ø1 BOT IRE M ø x M8 B B x M12 M B319V V X M12x100 mm UPPIED Ordering Example: ylinder with Mount: B Mount Only: DADO.UA fax
14 14 R Deep.63 Force harts M8 On-ontact Force psi lb Ordering Example: ø ø ø TO Basic Model FORE (lb.) ø kn / 5 ton 3.12 G 1/ Based on charge of 2175 psi lb. Part Number: Includes eries (90.10 or 90.8), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory TRAVE (%) DADO.UA fax FORE (dan) 4977 dan MAXIMUM REOMMENDED TRAVE 90% Part No. mm inch IO standard stroke lengths ( only) 37.5 mm shorter! On-ontact Force bar dan TO harging Pressure: bar ( psi). When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is, self-contained
15 50 kn / 5 ton TFM Welded TW Welded TR2 Welded TNF1 Welded 4 x M16 ø165.1 BOT IRE ø165.1 BOT IRE ø x M ø B B B B MOUNT FROM TOP OR BAE ø155 BOT IRE M ø B B319V V X M12x100 mm UPPIED x M12 M Ordering Example: ylinder with Mount: B Mount Only: DADO.UA fax
16 16 R Deep.63 Force harts M8 On-ontact Force psi lb Ordering Example: ø80 ø ø TO Basic Model FORE (lb.) ø Part Number: Includes eries (90.10 or 90.8), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. 75 kn / 7.5 ton 3.12 G 1/ Based on charge of 2175 psi Part No. mm inch lb dan TRAVE (%) TO DADO.UA fax FORE (dan) MAXIMUM REOMMENDED TRAVE 90% IO standard stroke lengths ( only) 50 mm shorter! On-ontact Force bar dan harging Pressure: bar ( psi). When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is, self-contained
17 75 kn / 7.5 ton TFM Welded TW Welded TR2 Welded TNF1 Welded 4 x M ø196.9 BOT IRE 3/ ø195.2 BOT IRE ø x M x M ø x M B B B B MOUNT FROM TOP ONY x M16 4 x M16 ø195 BOT IRE x M M 4 x M ø NOTE: ee page for IO version B B319V V X M12x1 mm UPPIED x M12 M Ordering Example: ylinder with Mount: B Mount Only: DADO.UA fax
18 100 kn / 10 ton M10 ø Model Not Available in 90.8 eries R Deep.67 ø ø ø G 1/ Part No. mm inch IO standard stroke lengths TO Basic Model Force harts On-ontact Force psi lb FORE (lb.) Based on charge of 2175 psi lb dan TRAVE (%) FORE (dan) MAXIMUM REOMMENDED TRAVE 90% On-ontact Force bar dan Ordering Example: Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory TO harging Pressure: bar ( psi). When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is, self-contained DADO.UA fax
19 100 kn / 10 ton B B B MOUNT FROM TOP OR BAE x M16 4 x M16 ø240.4 BOT IRE M ø x M16 B x M16 B x M12 M Ordering Example: ylinder with Mount: B Mount Only: DADO.UA fax
20 90.10 Miscellaneous Mounts pecial WDX Mounts F MOUNT FROM TOP OR BAE F F ø80 BOT IRE 0 F MOUNT FROM TOP OR BAE 80 2 x M ø M 4 x M pecial WDX Mounts (ontinued) Alternative Mounts B31 4 x A B14 B B A B M M M M M D x A A B D M M M M Alternative Mounts (ontinued) TK Model Welded TK Models 4 x A D E Welded B ylinder Thrust Key Backup Required* F ylinder Thrust Key Backup Required* A B D E F M M M M * Thrust Key not supplied DADO.UA fax
21 Repair Tools and Accessories artridge tarter Kit (00500, 00750, 01500, 000, 05000, 07500, 10000) The artridge tarter Kit includes an Assembly ap (90.3. ) and an Assembly one ( ). The Assembly one is used to start the cartridge assembly onto the rod without damaging the seal, the Assembly ap is used to set the cartridge at a proper depth for -Ring installation. -Ring Installation Tool (00170 Model) (00500 Model) (00750 Model) To insert the -tyle Retaining Ring into the retaining ring groove of 170, 500 and 750 Models Removal leeve (00400, 00500, 00750, 01500, 000, 05000, 07500) To position the cartridge below the -ring groove when assembling or disassembling a gas spring. -Ring Installation Tool ( Models) (10000 Model) To insert the -tyle Retaining Ring into the retaining ring groove of Models. For more information request bulletin B01101D. -Ring Removal Tool ( Models) ( Models) To remove the -tyle Retaining Ring safely in a single controlled motion. T-Handle M6 Thread M8 Thread M10 Thread To remove the piston rod when disassembling and position correctly when reassembling Patented Patented Quick Disconnect harging Assembly Use the DADO Quick Disconnect harging Assembly, , with the harging Nipple or Pressure Analyzer to charge self-contained gas springs. The can also be used with a DADO control panel to charge linked systems. The includes the Pressure Regulator, Hose Assembly and the Quick Disconnect Filling Assembly. Hose Assembly 3m (10 ft) Pressure Regulator Quick Disconnect Filling Assembly Quick Disconnect harging Nipple M6 Thread G 1/8 Port Use the DADO Quick Disconnect harging Nipple to charge the gas springs. For more information, contact DADO DADO.UA fax
22 tandard oad ell (00500, 00750, 01500, 000, 05000, 07500, 10000) The tandard oad ell gives precise measurement of gas spring charging pressure. Each model requires its specified load cell. oad cells for Models may be used with the Portable Test tand; the load cell for the may be used with an arbor press. DADO Pressure Analyzer DADO s Pressure Analyzer includes two interchangeable bits to easily charge, discharge and gauge the pressure in any DADO Nitrogen Gas pring. For more information request bulletin B01133E. Repair Tools and Accessories Digital oad ell 90.5.BGA (Meter) A (22.2 kn oad ell) A (222 kn oad ell) The 90.5.BGA meter can display force in N, Kg or lbs. When paired with the A oad ell it may be used to measure gas spring force up to 5,000 lbs. When paired with the A oad ell gas spring force can be measured up to 50,000 lbs. For more information request bulletin B04106D. Portable Test tand / 2D (00170) ( ) Use the Portable Test tand in conjunction with a tandard oad ell for precise measurement of gas spring force. Excludes use with For more information request bulletin B BGA A A DADO Electronic Pressure Monitors DADO s Electrical Pressure Monitors indicate if pressure drops below a preset level, alerting the press controller to shut down the press. They are available in a variety of configurations to suit a variety of applications. For more information request bulletin B10105B or contact DADO. Valve Bleed Tool Use the DADO Valve Bleed Tool to slowly discharge a spring to the desired pressure. For more information contact DADO. Port ervicing Tool To perform all necessary servicing to the valve compartment. DADO Repair Tool Kits DADO s most popular repair tools are now available in boxed sets for each of our three main classifications of nitrogen gas springs: Micro, Mini and arge eries. Kits may include DADO load cells, charging nipples and various repair tools. eparate repair tool and load cell sets are also available. For more information request bulletin B05143B DADO.UA fax
23 Parts ist eries Parts ist 90.8 eries Parts ist Piston Rod Model troke Rod Wiper Piston Rod Model troke Dust over Model -tyle Retaining Ring Model O-ring Backup Ring Dust over Model artridge Assembly Model O-ring artridge Assembly Model Tube Assembly Model troke Alternative ompact Valve / 90.8 Rod afety Ring Model Retainer Wear Ring Model Rod Retainer A. Model Tube Assembly Model troke ompact Valve artridge Valve Port Plug artridge Valve Port Plug Repair Kits Include a fully assembled cartridge, dust cover, bottle of assembly oil and a maintenance manual eries Model Repair Kit No A eries Model Repair Kit No Replacement Part Ordering Example: Part Number eries: = 10 or 90.8 = 8 Piston Rod: troke (mm) Model: 00170, 00500, 00750, 01500, 000, 05000, 07500, (00170, and models available in eries only) NOTE: DADO s are permanently marked with model number, serial number and repair kit number. Please refer to these when ordering replacement parts DADO.UA fax
24 AUTION DO NOT attempt maintenance on spring until internal pressure is exhausted. Operating and Technical Data Operating pecifications harging Medium: Nitrogen Gas harging Pressure Range: bar ( psi) Operating Temperature: 4 71 (40 F 160 F)* Maximum peed: 1.6 m/sec (63 in/sec) *For extended range applications contact DADO. F.1 F.3 R.1 * % Printed in UA 90% Drain Hole elf-contained to inked Operation Always wear safety glasses when maintaining gas springs. When exhausting pressure, place the gas spring horizontally with the port up for safety. Remove port plug, or (F.1). With the cylinder in the horizontal position, depress the valve stem using the appropriate tool (F.2). over the port with a cloth to absorb discharge. After all of the gas pressure is exhausted, be sure that the piston rod will retract into the tube manually. If not, try depressing the valve again. If still unsuccessful, stop and contact your DADO ervice Representative. Remove the valve using the appropriate tool (F.3). ubricate the threads and o-ring of the port adapter being installed (F.4). Install port adapter in open port (F.4). A wide variety of port adapters are available, refer to DADO s Nitrogen Gas pring inked ystem omponents atalog. DADO surge tanks are used with open-flow systems to increase the volume in the system thereby reducing the pressure rise when cylinders are stroked. Refer the the inked ystems atalog for more information. Recharging elf-contained Gas pring Hold the spring vertically at all times during filling. Never compress the gas spring in a vice or clamp outside of the die or application as damage to the gas spring can result. Never fill a gas spring unless the rod is in the fully extended position (R.1). Filling a gas spring with its rod down can result in improper retaining ring seating (R.2). Thread the T-handle , or into the rod end and depress the valve stem with the appropriate tool, then pull the rod cartridge assembly up until it is seated firmly against the retaining ring (R.1). harge thes spring to the desired pressure. Refer to DADO s 90.8/90.10 eries Maintenance Instructions B06124D for complete step-by-step instruction. Provide troke Reserve DADO s 90.8 and eries Gas prings will permit travel of the full nominal stroke; however, at least a 10% stroke reserve is recommended to achieve optimal performance and safety (.1,.2). Overstroking the rod or impacting the top of the gas spring will cause permanent damage. Avoid ide oading ide loading resulting from press action or die construction causes increased wear on bearing, seal and piston rod (.4). Therefore, avoid side loading when possible (.3). Rod End Thread The end of the piston rod has a construction thread intended for assembly and disassembly only and should never be used to mount or secure the gas spring (.4). Die vibration and/or misalignment will damage the spring. Protect From Fluids Direct contact with certain die lubricants and cleaners should be avoided (.6). Protect gas springs by providing adequate drainage in gas spring pockets (.5). F.2 F.4 R.2 > * >1.4.6 The global leader in nitrogen gas spring technology Plymouth Oaks Blvd. Plymouth, Michigan UA DADO.UA fax DADO, Inc. 17 All Rights Reserved Product changes may occur during the life of this catalog without prior notice, but products supplied will remain functionally interchangeable.
PED 97/23/EC COMPLIANT. Full and Compact Height Nitrogen Gas Springs Series Full Height / Matches ISO Standards
atalog No. 10108A Full and ompact Height 90.10 / 90.8 eries 90.10 eries Full Height / Matches IO tandards 90.8 eries ompact Height Alternative PED 97/23/E OMPIANT 2 Introduction The global leader in nitrogen
More informationCatalog No. C09101B. SC Series. Super Compact Nitrogen Gas Springs PED 2014/68/EU COMPLIANT
atalog No. 09101B uper ompact Nitrogen Gas prings eries PED 2014/68/EU OMPIANT uper ompact Nitrogen Gas prings Introduction DADO produces top quality products at competitive prices and provides a superior
More informationCatalog No. C Super Compact Nitrogen Gas Springs. SC Series
atalog No. 09101 uper ompact Nitrogen Gas prings eries uper ompact Nitrogen Gas prings Introduction DADO produces top quality products at competitive prices and provides a superior level of customer service.
More informationCompact Nitrogen Gas Springs / 90.60N Series
Catalog No. C09112 Compact 90.60 / 90.60N eries 90.60 / 90.60N eries 90.60N.00500 0.5 ton / 5 kn ø 16.5 2 x R1 C L ø44.5 G 1/8 Port 2 x 12.5 Deep Force Graph FORCE (dan) 665 625 580 535 490 445 Based on
More informationCatalog No. C12119B. Nitrogen Gas Spring Lifters. Lifters for Single-Point, Multi-Point and Rail Lift Applications
atalog No. 12119B Nitrogen Gas pring Lifters L eries Lifters for ingle-point, Multi-Point and Rail Lift Applications Nitrogen Gas Lifters Introduction High Quality onstruction The global leader in nitrogen
More informationCatalog No. C12118E PED 2014/68/EU COMPLIANT. Ideal for Coil Spring Replacement
atalog No. 12118E Micro Micro Series PED 2014/68/EU OMPIANT Ideal for oil Spring Replacement Micro Series Introduction DADO produces top quality products at competitive prices and provides a superior level
More informationCatalog No. C11107A. Extreme Condition Solutions PED 97/23/EC COMPLIANT
Catalog No. C11107A PED 97/23/EC COMPLIANT Nitrogen Gas Spring Introduction The global leader in nitrogen gas spring technology DADCO produces top quality products at competitive prices and provides a
More informationCatalog No. C Gestamp Specific Selected Products PED 2014/68/EU COMPLIANT
atalog No. 15114 PED 2014/68/EU OMPIANT Introduction The global leader in nitrogen gas spring technology DADO produces top quality products at competitive prices and provides a superior level of customer
More informationSuper Compact CU4 420 CU
Product eries Gas prings including tandard Mounts uper ompact U4 420 U4 18300 Edition 1.2012 opyright KALLER Would you like to order this product? All available information at. FEATURE AND BENEFIT UPER
More informationT2 Mini Series. Mini Nitrogen Gas Springs. One-half inch diameter T2-50. Three-quarter inch diameter T2-90. One-inch diameter T2-180
T2 Mini eries Mini Nitrogen Gas prings One-half inch diameter T2-50 Three-quarter inch diameter T2-90 One-inch diameter T2-180 tripper springs with special model conforming to GM Global tandard Table of
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
More information.75 Ton to 7.5 Tons Nitrogen Gas Springs ( 7.5 kn to 75 kn ) IS Series. International Standards NAAMS Standards
N-FORCER CER.75 Ton to 7.5 Tons Nitrogen Gas Springs ( 7.5 kn to 75 kn ) IS Series International Standards NAAMS Standards Detachable mounts shown Welded mounts also available Die, Mold & Automation Components,
More informationBray/ VAAS Slurry Series Knife Gate Valve 760/762/765/766/767/768 Series Operation and Maintenance Manual
Bray/ VAAS Knife Gate Valve 760/762/765/766/767/768 Series Table of Contents Definition of Terms 1 Safety Instructions 1 Introduction 2 Unpacking 2 Storage 2 Installation 3 Commissioning 3 Cylinder-Operated
More informationFrom the Hyson family of higher force gas springs
rom the Hyson family of higher force gas springs Same force and diameter as T3 Series S-4 (7/16-20) port for use with standard full size hoses ive sizes from 1000 to 9500 Up to 21,400 lbs. contact force
More informationRam Cushions and Pressure Parallels Dynamic Solutions For A Global Market
Nitro-Dyne Ram Cushions and Pressure Parallels APPROVED 97/23/EC Dynamic Solutions For A Global Market Nitro-Dyne Ram Cushions and Pressure Parallels Table of Contents Page Introduction...2 The Advantages...3
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationOperating Instructions ProMinent Low Flow Single Metering Pump (S-1) Dosing Package
Operating Instructions ProMinent Low Flow ingle Metering Pump (-) Dosing Package ProMinent Contents Page afety Instructions... Introduction... Unpacking... Installation... Description of Controls & Operation...
More informationCJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
Air Cylinder eries CJ1 ouble Acting: ø/ingle Acting, pring Return: ø2., ø eries Variations tandard eries CJ1 eries Action ouble acting ingle acting Mounting style asic style ingle rod ingle rod pring return
More informationOperating Instructions ProMinent Low Flow Dual Metering Pump (S-2) Dosing Package
Operating Instructions Low Flow Dual Metering Pump (-) Dosing Package Contents Page afety Instructions... Introduction... Package Configuration... Unpacking... Installation... Contents Page Description
More informationSeries MHK2. Wedge Cam Operation Slide Guide Air Gripper (2 Finger)
Wedge Cam Operation lide Guide Air Gripper (2 inger) ø2, ø, ø2, ø2 oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials tandard: Carbon steel Optional:
More informationHIGH PRESSURE TRUNNION BALL VALVES TBV SERIES
HIGH PREURE TRUNNION BALL VALVE TBV ERIE TBV FEATURE On/Off-service ball valve with 2-way pattern Diverter, selector and on/off-service ball valve with 3-way pattern MAWP* 10,000 psi (689 bar) with PEEK
More informationPrecision Mini Power Slides-Built-in Cylinder
Precision ini Power Slides-Built-in ylinder PS SERIES 4.126 Precision applications: Preloaded Dual- roller bearings eliminate side play for excellent part position repeatability. inear accuracy is within.0001"
More informationDESIGN-TITE Nitrogen Gas Springs. They truly are... Better by Design
DESIGN-TITE Nitrogen Gas Springs They truly are... Better by Design DESIGN-TITE - Expanded & Improved We are proud to offer our new and expanded line of nitrogen gas springs. Now the manufacturer of the
More informationDESIGN-TITE Nitrogen Gas Springs. They truly are... Better by Design
DESIGN-TITE Nitrogen Gas Springs They truly are... Better by Design DESIGN-TITE - Expanded & Improved Index We are proud to offer our new and expanded line of nitrogen gas springs. Now the manufacturer
More informationDieMax XL TM Maximum Life Springs
TRUSTED SOLUTIONS AND INNOVATION DieMax XL TM Maximum Life Springs Meets ISO Standards DieMax XL TM Maximum Life Springs Strategically located to serve you better IEM, a division of Connell Limited Partnership,
More informationHydraulic Long Jacks
Operating Instructions & Parts Manual Hydraulic Long Jacks Model 44915 44930 44940 44980 44981C (Air option) Capacity 1-1/2 Ton 3 Ton 4 Ton 8 Ton 8 Ton Models 44915, 44930, 44940 & 44980 Model 44981C U.S.
More informationLS100L Battery-powered Punch Driver
OPERATION MANUAL Serial Number GATOR LS100L Battery-powered Driver Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this
More informationTanker B Series. High Force, High Performance. H&O DIE SUPPLY, INC Dynamic Solutions for a Global Market
High Force, High Performance Tanker B Series Over 25% more force than the Super Tanker Series it replaces Dynamic lubrication extends spring life Bore seal resists contamination and rod damage Self-aligning
More informationMulticylinder Diesel engines in modular system 15-59kW 20-80HP
Multicylinder Diesel engines in modular system -59kW 20-80HP MOTORENFABRIK HATZ D-94099 RUHTORF GERMANY Tel: 0 85 1 / 19-0 Fax: 1 94 18 http://www.hatz-diesel.de email: marketing@hatz-diesel.de 5 / 518
More informationInstrument Manifold Valves
Instrument Manifold Valves eries 5000 Accurate flow measurement is of primary importance in achieving an efficient process system. Autoclave Engineers offers a complete line of needle, gauge and instrument
More informationDesign. Dynamic Sealing Face Ød1,ØD max Static Sealing Face Ød2,ØD2, L1 3.2 max 16 max 125 max 140 max
Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured
More informationCharts for Solenoid Valve Selection
harts for olenoid election 1. ir flow rate of each series (2-, 3-port) olenoid valve series 062 126 ir flow rate /min [ft. 3 /min.] (N) 200 300400 1000 2000 3000 10000 20000 170 [6.0] 370 [13.1] upply
More informationContents. Hydraulic Cylinder
Hydraulic Cylinder Contents Tie Rod Cylinders of 2500psi series----------------------------------------2~3 Tie Rod Cylinders of 3000psi series----------------------------------------4~5 NFPA interchangeable
More informationCombination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
More informationValve Mounted Cylinder. Action Built-in magnet. With air cushion. Double acting. Standard. Nonrotating rod. Standard. rod. Standard. rod.
eries V/MVGQ,,,, 2,,,, 63,, eries Variations eries eries V ction uilt-in magnet With air cushion variations uilt-in One-touch fitting With auto switch With strong scraper Page RE RE X ouble acting -1-
More informationDESIGN 2 -TITE Nitrogen Gas Springs
READY THE INNOVATOR OF OUR INDUSTRY SM DESIGN 2 -TITE Nitrogen Gas Springs They truly are... Better by Design DESIGN 2 -TITE - Expanded & Improved We are proud to offer our new and expanded line of nitrogen
More informationPurging Air From Divider Block Lubrication Systems
FROST ENGINEERING SERVICE Purging Air From Lubrication Systems A D I V I S I O N O F G E C S E Y S A L E S & S E R V I C E DESCRIPTION Divider block lubrication systems operate correctly only when all
More informationYour Global Flow Control Partner. Series 92/93 Pneumatic Actuators. Technical Manual
Your Global Flow Control Partner Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 04/18/2017 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation Notes...
More informationAir Cylinder. Single rod 2.5. Single rod Spring return. How to Order/Double Acting. Applicable tubing. Symbol Tube material Polyurethane Soft nylon
Air Cylinder Double Acting: ø/ingle Acting pring Return: ø2., ø Variations eries tandard B Basic mm Double acting ingle acting ingle rod ingle rod pring return 2. tandard stroke,, 1,,,, 1, How to Order/Double
More informationG max rad Ød 2 Ød 3 ØD to to to to
Design Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material. Manufactured
More informationDualSeal 24 Hose System
DualSeal 24 Hose System THE PREFERRED HOSE SYSTEM IDEAL FOR CONNECTING NITROGEN GAS SPRINGS AND ENSURING A BALANCED LOAD METAL FORMING SOLUTIONS DualSeal 24 System The Preferred Hose System IDEAL FOR CONNECTING
More informationHydraulic cylinders are devices which convert fluids power into mechanical force or motion. This force or motion will be in a straight line.
HYDRAUC CYNDR Hydraulic cylinders are devices which convert fluids power into mechanical force or motion. his force or motion will be in a straight line. C--1-0 Graphic ymbol C eries C- standard hydraulic
More informationMachine Tool Grade Ball Screw Linear Actuators
Machine Tool Grade Ball crew Linear Actuators High Precision With Force To 15,000 LBf Rugged teel Construction Designed For High ystem tiffness Flexible Design To uit Any Motor Protected From Contamination
More informationT5 Series. Ultra High-Force, Compact-Design Nitrogen Gas Springs. Ultra High-Force, Compact-Design Nitrogen Gas Springs.
T5 Series T5-500 to T5-1900 Ultra High-Force, Compact-Design Nitrogen Gas Springs Ultra High-Force, Compact-Design Nitrogen Gas Springs APPROVED 97/23/EC T5 Series Ultra-High Force, Compact-Design Nitrogen
More informationTOX -Powerpackage: The complete drive family for pressforces from kn
T -owerpackage: The complete drive family for pressforces from 2-2000 k The T -owerpackage is available with different pressforces, strokes and structural shapes. election criterions: 1) ressforce required
More informationSD Bendix MV-3 Dash Control Module DESCRIPTION. Bottom View
SD-03-3415 Bendix MV-3 Dash Control Module MOUNTING PLATE MOUNTING HOLES (4) Dual Circuit SUPPLY Check VALVE AUXILIARY PORT (Optional) delivery DESCRIPTION secondary supply Trailer delivery FIGURE 1 -
More informationø19 to 38mm ø19 to 150mm ø25 to 150mm ø25 to 120mm ø38 to 165mm
TBLE OF CONTENT USEFUL INFORMTIONS MICRO GS SPRINGS HIGH POWER GS SPRINGS SUPER COMPCT GS SPRINGS LOW PROFILE GS SPRINGS ISO GS SPRINGS CONNECTION OF GS SPRINGS CONNECTION MNIFOLD BLOCKS MNIFOLD DISTRIBUTORS
More informationOperating Instructions & Parts Manual. Air/Manual Hydraulic Bottle Jacks
J18124-M1_032015 Operating Instructions & Parts Manual Air/Manual Hydraulic Bottle Jacks Model J18124 J18204 Capacity 12 Ton 20 Ton U.S. Patent Nos. 6,012,377-5,946,912! This is the safety alert symbol.
More informationø19 to 38mm ø19 to 150mm ø25 to 150mm ø25 to 120mm ø38 to 165mm
TBLE OF CONTENT USEFUL INFORMTIONS MICRO GS SPRINGS HIGH POWER GS SPRINGS SUPER COMPCT GS SPRINGS LOW PROFILE GS SPRINGS ISO GS SPRINGS CONNECTION OF GS SPRINGS CONNECTION MNIFOLD BLOCKS MNIFOLD DISTRIBUTORS
More informationSeries OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
More informationT3F Series HIGH FORCE GAS SPRINGS WITH G1/8 CHARGING PORT INTRODUCING COMPLETE RANGE OF GAS SPRINGS MEETING FCA GLOBAL DIE ENGINEERING STANDARDS
TF Series HIGH FORCE GAS SPRINGS WITH G1/8 CHARGING PORT INTRODUCING COMPLETE RANGE OF GAS SPRINGS MEETING FCA GLOBAL DIE ENGINEERING STANDARDS GENUINELY HYSON Since 196 HYSON Metal Forming Solutions has
More informationSMD2. Compact cylinder. Space saving structure 6, 10, 16 20, 25, 32. Simple square design. Switch integrated. Easy centering. Precise installation
pace saving structure Overview his direct mount cylinder is a high rigidity/small square air cylinder with excellent installation accuracy and multisurface direct mount. he square shaped body improves
More informationThrough Hole Parallel Gripper PPC Series
ourtesy of MA/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 8 hrough Hole Parallel Gripper PP Series hrough Hole Gripper: Designed for unique applications
More informationGMR-S and GMR40-S Disc Brake Caliper - Spring Applied, Air Released
(GMR) 9 (GMR) ø GMR-S and GMR-S Disc Brake Caliper - Spring Applied, Air Released DB Nominal dimensions given. For specific dimensions please contact Twiflex Limited. For GMR Mk caliper details see DB
More informationPin Cylinder. Series CJP. Double Acting/Single Acting Spring Return. Standard Variation Built-in Magnet. Single Rod. Single Rod Spring return
Pin Cylinder eries ouble cting/ingle cting pring Return Variations eries tandard tyle eries With uto witch ouble cting (Non-lube) ingle cting (Non-lube) ction ingle Rod ingle Rod pring return tandard Variation
More informationTPCA Power Clamps Catalog
TPCA Power Clamps Catalog Pneumatically Operated, Weld-Contamination Sealed, Heavy Duty Power Clamps > Degree of arm opening can be adjusted from -12 > One clamp for both dual or single arms > Uses TRILOK
More informationT4 Series HEAVY DUTY GAS SPRINGS IDEAL FOR STAMPING ULTRA-HIGH STRENGTH STEELS HYSON 2018
T4 Series HEAVY DUTY GAS SPRINGS IDEAL FOR STAMPING ULTRA-HIGH STRENGTH STEELS 1 Introduction Heavy Duty Gas Springs GENUINELY HYSON Since 1964, HYSON has been dedicated to providing safer and more reliable
More informationGas Spring Service & Maintenance Accessories
Gas Spring Service & Maintenance Accessories Introduction Service & Maint. Accessories ACCESSORIES FOR SERVICING HYSON NITROGEN GAS SPRINGS AND HOSE SYSTEMS Table of Contents Page Accessories... 1 Charging
More informationDANKO STOCK B DANKO XL SKID UNIT 250 Gallon UPF Defender Poly Tank
DANKO XL SKID UNIT 250 Gallon UPF Defender Poly Tank FIRE PUMP A Waterous 2515-LE pump shall be provided and bolted directly to the specified engine and capable of the following performance: Max Pressure
More informationPower Clamp Cylinder
Power Clamp Cylinder eries New pecial CK /M(D)UK For France CLKZ1R For Europe For North merica CKZ2N MK2T/MK2/MK C(L)KQ For sia CLK2 13 Toggle link mechanism Maintains secure and powerful support. Proximity
More informationInstallation Manual. Model T675A Engine Brakes. For Mack 6 Cylinder, 2 valve Head ENDT-673, 675, 676 & E6 Series Engines.
Engine Brakes Installation Manual Model T675A Engine Brakes For Mack 6 Cylinder, 2 valve Head ENDT-673, 675, 676 & E6 Series Engines TecBrake P.O. Box 27822 Houston, Texas 77227 INSTALLATION MANUAL TECBRAKE
More informationPackless Valves. Instrument / Analyzer Products. Catalog 4515/USA April 2006
Packless Valves Instrument / Analyzer Products Catalog 4515/UA April 2006 NV55 eries Catalog 4515/UA NV55 eries High Flow Diaphragm Valves Parker Hannifin Corporation s presents the NV55. The NV55 is an
More informationT2 ISO Series. Fully meets ISO 11901, NAAMS, Chrysler, Ford and General Motors Die Standards
T2 ISO Series Fully meets ISO 11901, NAAMS, Chrysler, Ford and General Motors Die Standards Secondary piston ring assembled onto rod Guide features built-in pressure relief if assembled upside down Modular
More informationI & M 8000 Series. Ideal Installation Schematic. Preferred Installation. Trouble Shooting
I & M 8000 Series 3170 Wasson Road Cincinnati, OH 45209 USA Phone 513-533-5600 Fax 513-871-0105 lowflow@richardsind.com www.lowflowvalve.com Installation & Maintenance Instructions for 8000 Series Low
More informationOperating & Maintenance
TL & C SERIES Operating & Maintenance A B C D E F TO RAISE HOIST 1. Start Engine in neutral 2. Depress the clutch and engage the P.T.O. 3. Release the clutch and open the hydraulic valve. If the pump squeals,
More informationGlasair Service Bulletin 161
Glasair Service Bulletin 161 Subject: pplication: Issue: Compliance Time: Inspection of RG Gear Oleos for Corrosion Glasair I and early model Glasair II RGs Possible corrosion inside landing gear oleo
More informationCVS Rack and Pinion Pneumatic Actuator
Instruction Manual CVS Rack and Pinion Pneumatic Actuator Introduction These instructions apply specifically to the CVS Rack and Pinion pneumatic actuator. This manual provides sizing, maintenance, operation,
More informationB-1125 DANKO STOCK. DANKO XL SKID UNIT UPF Defender Poly Tank
FIRE PUMP DANKO XL SKID UNIT UPF Defender Poly Tank A Waterous 2515LE pump shall be provided and bolted directly to the specified engine and capable of the following performance: Max Pressure - 75 GPM
More informationLined Valves for High-corrosion and Heavy Capacity. Electronic Data Testing Centre For High Pressure Oil Gas Seal 15000PSI XMAS TREE UP DOWN TOP
Lined Valves for High-corrosion and Heavy Capacity 15000PSI XMAS TREE Electronic Data Testing Centre For High Pressure Oil Gas Seal MSP/DRILEX (China) Inc. INTRODUCTION WB Ball Valves ZN Choke Valves (Needle
More informationPFA LINED BALL VALVES Installation, Operation and Maintenance Manual
ACRIS PFA LINED BALL VALVES WWW.AMRESIST.COM Table of Contents Safety Instructions - Definition of Terms............................................2 Introduction..............................................................2
More information611H Flo-Con Pressure Regulators & Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 611H Flo-Con Regulators & Valves Catalog F-2, February 2012 Page 2
More informationT3T Series. From the Hyson family of higher force gas springs. Dynamic Solutions for a Global Market. Same force and diameter as T3 Series
T3T Series rom the Hyson family of higher force gas springs Same force and diameter as T3 Series S-4 (7/16-20) port for use with standard full size hoses Uses T2 flange mounts ive sizes from 1000 to 9500
More informationCPD Actuators. Powerful, Maintenance-Free Roller Screw Actuators COMPATIBLE WITH VIRTUALLY ANY SERVO OR STEPPER MOTOR
CPD Actuators Powerful, Maintenance-Free Roller Screw Actuators COMPATIBLE WITH VIRTUALLY ANY SERVO OR STEPPER MOTOR CREATIVE SOLUTIONS TO AUTOMATION S MOST DEMANDING CHALLENGES CMC Roller Screw Actuators
More informationValtek Spring Cylinder Linear Actuators
Valtek Linear Actuators GENERAL INFORMATION The following instructions are designed to assist in installing, troubleshooting and servicing Valtek spring cylinder actuators. Product users and maintenance
More informationACT-132. DC/91000/M, DC/93000/M Single acting Ø mm DC/9 / /
Series 90000 ompact Actuators D/91000/, D/93000/ Single acting Ø 12... 63 mm ne third the basic length of a corresponding IS/VDA model ow friction, long life seal design Fully non-corrodible specification
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More informationBMK-18 U.S. Patent #5,298,158
BMK- U.S. Patent #5,29,5 Marine Dual Remote Filtration System Mounting Kit Installation and Servicing Instructions IMPORTANT NOTICE Read all instructions completely before attempting to install this unit.
More informationOPERATION AND PARTS MANUAL
OPERATION AND PARTS MANUAL MODEL NUMBER : PART NUMBER : GTL 1110 1900-0510 SERIAL NUMBER : BAYNE MACHINE WORKS, INC. PHONE: (864) 288-3877 910 FORK SHOALS ROAD TOLL FREE: (800) 535-2671 GREENVILLE S.C.,
More informationModel DF233 Control Valve
Figure 1 DF233 Control Valve TABLE OF CONTENTS Introduction 2 Body and Packing Reassembly 7 Specifications 3 Fail Closed Actuator Reassembly 8 Valve Sizes 3 Fail Open Actuator Reassembly 9 Unpacking 4
More informationOperation & Service Manual
Operation & Service Manual Technical Manual Model: 02-7813C0100 12 Ton (10.8 Metric Ton) Two Stage Hydraulic Axle Jack 06/2006 Rev. OR Includes Illustrated Parts List Tronair, Inc. 1740 Eber Road Holland,
More informationPiston Accumulators. SK Series 28 INNOVATIVE FLUID POWER. Piston Accumulators. Piston Types. Description. Construction.
SK Series Piston Accumulators Piston Types TYPE 2 Without heck Valves Application (without heck Valve) Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number
More informationAxial piston fixed pump A17FO Series 10
Axial piston fixed pump A17FO eries 10 E 91520 Issue: 11.2015 eplaces: 10.2014 High-pressure pump for use in commercial vehicles izes 23 to 107 Nominal pressure/maximum pressure 350/400 bar Bent-axis design
More informationBMK-27. Dual Remote Filtration System Mounting Kit. Installation and Servicing Instructions (DURAMAX) C. Oil Supply
IMPORTANT NOTICE Read all instructions completely before attempting to install this unit. Improper installation could result in serious system and/or equipment damage. The installation of this system is
More informationPINS & BUSHINGS METRIC
PINS & BUSHINGS METRIC PINS & BUSHINGS METRIC CONTENTS PAGE NUMBER General Information 1 Plain & Ball Bearing Guide Posts Press Fit Guide Posts 2 Demountable Guide Posts 4 Automotive Straight Guide Posts
More informationModel DF269 Control Valve
Figure 1 DF269 Control Valve TABLE OF CONTENTS Introduction 2 Fail Open Actuator Disassembly 6 General 2 Body and Packing Reassembly 7 Scope 2 Fail Closed Actuator Resassembly 8 Specifications 3 Fail Open
More informationSC HYDRAULIC ENGINEERING CORPORATION
Designer and Manufacturer of Hydraulic and neumatic Equipment C HYDRAULIC ENGINEERING CORORATION 113 Columbia treet - Brea, California 92821 - UA hone (714) 257-48 - Fax (714) 257-481 L6 ERIE AIR OERATED
More informationINSTALLATION, OPERATION, AND MAINTENANCE MANUAL
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL MODEL 4D-200 REDUCED PRESSURE PRINCIPLE (RPZ) & MODEL 4D-700 REDUCED PRESSURE DETECTOR ASSEMBLY (RPDA) BACKFLOW PREVENTERS 2 ½ 10 Conbraco Industries Inc.
More informationNor East. Instructions Safety Messages. Inspection. Parts. DeZURIK Service. Type 05 Pneumatic Actuator Used With Globe Valves
Instructions Safety Messages These instructions are intended for personnel who are responsible for installation, operation and maintenance of your DeZURIK Actuator. All safety messages in the instructions
More informationMarine Gasoline Products
025 -RAC eries Marine Gasoline Products In -line Fuel Filters Being on the water is fun, having water in your fuel is not. More than ever, today s high performance gasoline engines require clean, dry fuel.
More informationMETRIC BALL SCREW JACKS
METRIC BA METRIC BA With over twenty-five years of experience manufacturing precision worm gear screw jacks, Nook Industries has expanded the ActionJac offering to include metric models providing design
More informationTridak Model 3200 User Guide Piston Inserter
Tridak Model 3200 User Guide Piston Inserter Instructions for Safe Use Setup and Operation Maintenance Ordering Spare Parts and Accessories 2 Tridak Model 3200 Piston Inserter User Guide About Dymax Light-curable
More information4 Port Solenoid Valve
Port Solenoid Valve Rubber Seal Direct Operated Poppet Type Unprecedented high speed, with stable response times ON: ms, OFF: ms, Dispersion accuracy ±1 ms ( at a supply pressure of 0. MPa) (Use clean
More informationOpTK. Product Instruction Manual. Spring Cylinder Rotary Actuators INTRODUCTION SAFETY INFORMATION INSTALLATION. Leading Technologies For Control
Leading Technologies For Control Product Instruction Manual OpTK Spring Cylinder Rotary Actuators TABLE OF CONTENTS INTRODUCTION Safety Information... pg. 1 Unpacking... pg. 1 INSTALLATION... pg. 1 PREVENTIVE
More information* Screw clearance to allow bolt head to pass through - no counter bores
Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with
More informationMechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.
Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc
More informationI & M Mark 708. Ideal Installation. Start-Up Procedure. Installation & Maintenance Instructions for Mark 708 & 14M Actuator and Motor Valve
I & M Mark 708 370 Wasson Road Cincinnati, OH 509 USA Phone 53-533-5600 Fax 53-87-005 info@richardsind.com www.lowflowvalve.com Installation & Maintenance Instructions for Mark 708 & M Actuator and Motor
More informationPorta-Punch Manual
Porta-Punch Manual 474 E. 05th Street Cleveland, OH 4408-378 (26) 68-7400 Fax (26) 68-7009 www.clevelandsteeltool.com E-mail: sales@clevelandsteeltool.com 800-446-4402 TABLE OF CONTENTS Page General Information...
More informationAxial Piston Fixed Pump A2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal
More informationCOMPACT CYLINDER CYLINDER FORCE AND WEIGHT TABLE BASE WEIGHT EFFECTIVE AREA
CRS COMPACT CYLINDER STROKE TOLERANCE TEMPERATURE LIMITS VELOCITY LIFE EXPECTANCY SERIES CRS 1 psi min to 15 psi max at zero load [.7 bar min to 1 bar max] air.31 inch [.8 mm] -2 to +18 F [-28 to +82 C]
More informationAxial piston fixed pump A17FNO Series 10
Axial piston fixed pump A17FNO eries 10 E 91510 Issue: 11.2015 eplaces: 06.2012 Designed for use in commercial vehicles with standard pressure requirements ize 125 Nominal pressure/maximum pressure 250/300
More information