T3T Series. From the Hyson family of higher force gas springs. Dynamic Solutions for a Global Market. Same force and diameter as T3 Series
|
|
|
- Vincent Porter
- 6 years ago
- Views:
Transcription
1 T3T Series rom the Hyson family of higher force gas springs Same force and diameter as T3 Series S-4 (7/16-20) port for use with standard full size hoses Uses T2 flange mounts ive sizes from 1000 to 9500 Up to 21,400 lbs. contact force PPROV 97/23/ ynamic Solutions for a Global Market
2 T3T Series Ø (4X) 3 mm 0.12 in. 90 S L Y 11.5 mm 0.45 in. Product Specifications Pressure Medium... Nitrogen Gas harging Pressure Range... Max. 150 bar/2175 psi Min. 25 bar/360 psi Maximum Operating Temperature /176 Maximum Strokes/Minute (model and stroke dependent) Maximum Utilized Stroke % Max. Piston Rod Velocity mm/min 315 ft/min Repair Kits...T3SK-1000, T3SK-2400, T3SK-4200, T3SK-6600, T3SK-9500 Inlet Valve harge itting... T Ø (2X) T3T-2400 through T3T-9500 T3T-1000 T3T-1000 imensional Information* Stroke S ontact orce ull Stroke orce L Y Order Number mm in. N lbs. N lbs. mm in. mm in. mm in. mm in. mm in. T3T-1000X T3T-1000X T3T-1000X T3T-1000X T3T-1000X T3T-1000X T3T-1000X T3T-1000X T3T-1000X T3T-1000X T3T-1000X T3T-1000X M10 (2X) depth 16mm T3T-2400 imensional Information* Stroke S ontact orce ull Stroke orce L Y Order Number mm in. N lbs. N lbs. mm in. mm in. mm in. mm in. mm in. mm in. T3T-2400X T3T-2400X T3T-2400X T3T-2400X T3T-2400X T3T-2400X T3T-2400X T3T-2400X T3T-2400X T3T-2400X T3T-2400X M12 (4X) depth 16mm 2
3 T3T-4200 imensional Information* Order Number Stroke S ontact orce ull Stroke orce L Y mm in. N lbs. N lbs. mm in. mm in. mm in. mm in. mm in. mm in. T3T-4200X T3T-4200X T3T-4200X T3T-4200X T3T-4200X T3T-4200X T3T-4200X T3T-4200X T3T-4200X T3T-4200X T3T-4200X M12 (4X) depth 16mm T3T-6600 imensional Information* Order Number T3T-6600X Stroke S ontact orce ull Stroke orce L Y mm in. N lbs. N lbs. mm in. mm in. mm in. mm in. mm in. mm in T3T-6600X T3T-6600X T3T-6600X T3T-6600X T3T-6600X T3T-6600X T3T-6600X T3T-6600X T3T-6600X T3T-6600X M12 (4X) depth 16mm T3T-9500 imensional Information* Stroke S ontact orce ull Stroke orce L Y Order Number mm in. N lbs. N lbs. mm in. mm in. mm in. mm in. mm in. mm in. T3T-9500X T3T-9500X T3T-9500X T3T-9500X T3T-9500X T3T-9500X T3T-9500X T3T-9500X T3T-9500X T3T-9500X *Longer stroke lengths available for all sizes. ontact Hyson ustomer Service at M12 (4X) depth 16mm NOT: ll dimensions are nominal. ata shown are typical. ctual data for any particular unit may vary. 3
4 T3T Series Mounting Options T3T-1000 T / / /2.22 9/.35 24/.94 13/.51 T3T-2400 T / / / /.43 29/ /.63 T3T-4200 T / / / /.53 33/ /.71 T3T-6600 T / / / /.53 36/ /.83 T3T-9500 T / / / /.69 41/ /1.06 S T3T-1000 T2-750-S 80/ / /2.22 9/.35 24/.94 13/.51 T3T-2400 T S 104/ / / /.43 29/ /.63 T3T-4200 T S 130/ / / /.53 33/ /.71 T3T-6600 T S 155/ / / /.53 36/ /.83 T3T-9500 T S 195/ / / /.69 41/ /1.06 S1 * P S S T3T-1000 T2-750-S 76.2/ /2.12 M10 / 3/8 SHS 25/.98 11/ /.025 M1 M2 M T3T-2400 T S 101.6/ /3.00 M12 / 1/2 SHS 25/.98 13/ /.025 *pproximate value T3T-4200 T S 127/ /3.87 M12 / 1/2 SHS 30 25/.98 13/ /.025 T3T-6600 T S 139.7/ /4.50 M12 / 1/2 SHS 25/.98 13/ /.025. T3T-9500 T S 177.8/ /5.50 M16 / 5/8 SHS 25/.98. NOT: This is a welded flange and not sold separately. NOT: This is a welded flange and not sold separately. 17/ /.025 Gas springs with welded flanges are not returnable. Gas springs with welded flanges are not returnable. *pproximate value 4 e T LM2 LM LM1 NOT: This is a welded flange and not sold separately. Gas springs with welded flanges are not returnable. T3T-1000 T2-750-T 110/ / /2.80 M12 / 1/2 SHS 25/ /.025 T3T-2400 T T 134/ / /3.78 M12 / 1/2 SHS 25/ /.025 T3T-4200 T T 170/ / /4.57 M16 / 5/8 SHS 25/ /.025 T3T-6600 T T 205/ / /5.55 M16 / 5/8 SHS 25/ /.025 T3T-9500 T T 245/ / /7.09 M20 / 3/4 SHS 25/ /.025 NOT: ll dimensions are nominal. ata shown are typical. ctual data for any particular unit may vary.
5 Mounting Options M1 M2 M MW T3T-1000 MW 108/ / / /.63 11/.43 19/.75 T3T-2400 MW 152.4/ / / / /.55 19/.75 T3T MW 171/ / / / /.55 25/.98 T3T-6600 MW 197/ / / / /.71 25/.98. NOT: This is a welded flange and not sold separately.. NOT: T3T-9500 This is a welded MW flange and 229/9.02 not sold separately / / /2.68 M16 / 5/8 SHS 25/.98 Gas springs with welded flanges are not returnable. Gas springs with welded flanges are not returnable. M1 M2 M 30. NOT: This is a welded flange and not sold separately Gas springs with welded flanges are not returnable. MW LM2 LM1 LM T3T-1000 MW 116/ /2.48 M10 / 3/8 SHS 19/.75 11/.43 T3T-2400 MW 152/ /3.35 M12 / 1/2 SHS 19/.75 11/.43 T3T-4200 MW 172/ /3.90 M12 / 1/2 SHS 25/.98 13/.51 T3T-6600 MW 196/ /4.61 M16 / 5/8 SHS 25/.98 17/.67 T3T-9500 MW 234/ /5.43 M20 / 3/4 SHS 25/.98 17/.67 NOT: This is a welded flange and not sold separately. Gas springs with welded flanges are not returnable. LM2 LM LM1 LMW T3T-1000 LMW 116/ / /1.26 M10 / 3/8 SHS 19/.75 11/.43 NOT: This is a welded flange and not sold separately. Gas springs with welded flanges are not returnable. T3T-2400 LMW 152/ / /1.50 M12 / 1/2 SHS 19/.75 13/.51 T3T-4200 LMW 178/ / /1.50 M12 / 1/2 SHS 19/.75 13/.51 T3T-6600 LMW 196/ / /1.50 M12 / 1/2 SHS 19/.75 13/.51 T3T-9500 NOT: ll dimensions are nominal. ata shown are typical. ctual data for any particular unit may vary. 5
6 T3T ccessories Service Gauge ssembly Part No.: MG-3000 harging and discharging the T3T for use in the self-contained mode is simple, when the MG-3000 is used. Note: Male quick disconnect charge fitting (T ) sold separately. Male Quick isconnect (harge itting) Part No. T The T quick disconnect is used along with the MG-3000 service gauge assembly when charging and discharging T3T Series gas springs in the self-contained mode. 7/16-20 Port Nitrogen harging ssembly Part Nos. N-2600 & N-2600-HP The N-2600 charging assembly is used to transfer nitrogen from a commercial bottle to T3T gas springs. The charging assembly includes a G-580 bottle fitting, regulator with bottle and system pressure gauges, shut-off valve and 10 feet of high pressure hose with a fitting for the control panel quick disconnect inlet or to the MG-3000 service gauge assembly. Note: The N-2600-HP is available for use with psi bottles. Note: G-680 bottle fitting provided with HP Series. Seal Kits and Tool Kits T3T gas springs are field repairable. There is a seal kit with detailed instructions for each size gas spring. Tool kits are also available. Seal Kit Number Tool Kit Number T3T-1000 T3SK-1000 T2TK T3T-2400 T3SK-2400 T3T-4200 T3SK-4200 T3T-6600 T3SK-6600 T2TK T3T-9500 T3SK-9500 Inlet Valve Removal Tool T2TK-IN NOT: ll dimensions are nominal. ata shown are typical. ctual data for any particular unit may vary. 6
7 T3T Ordering Options T3T-2400 X 63 S 2175 Model Stroke Mounting harge Pressure* T3T-1000 See Max psi T3T-2400 imensional S T3T-4200 Information S T3T-6600 T3T-9500 T MW** MW** LMW** *ll T3T gas springs shipped at maximum charge pressure unless otherwise specified. **ounterbore must be specified. NOT: ll dimensions are nominal. ata shown are typical. ctual data for any particular unit may vary. 7
8 Tanker T and Tanker S s Nitro-yne XP Manifolds Mini Manifolds orce Manager Systems T3 s daptive ams Mechanical ams T2 Standard s ontrollable s elay Return Manifolds Mini s ccessories recksville Road recksville, OH US Tel: , ax: mail: hyson@asbg.com Mainway urlington, ONT L7M 13 anada Tel: ax: Hyson Products 2007 T3T3M0907 lvd. Rogelio Gonzalez aballero #500 Parque Industrial Stiva eropuerto podaca, NL P Mexico Tel: ax:
From the Hyson family of higher force gas springs
rom the Hyson family of higher force gas springs Same force and diameter as T3 Series S-4 (7/16-20) port for use with standard full size hoses ive sizes from 1000 to 9500 Up to 21,400 lbs. contact force
T2L & LS Series. Low Profile Nitrogen Gas Springs. For lowest profile and highest force in new die designs, Hyson recommends T3 Series gas springs.
T2L & LS Series Low Profile Nitrogen Gas Springs Standard Gas Spring T2 L Series T2 LS Series For lowest profile and highest force in new die designs, Hyson recommends T3 Series gas springs. APPROVED 97/23/EC
Tanker B Series. High Force, High Performance. H&O DIE SUPPLY, INC Dynamic Solutions for a Global Market
High Force, High Performance Tanker B Series Over 25% more force than the Super Tanker Series it replaces Dynamic lubrication extends spring life Bore seal resists contamination and rod damage Self-aligning
T2 Mini Series. Mini Nitrogen Gas Springs. One-half inch diameter T2-50. Three-quarter inch diameter T2-90. One-inch diameter T2-180
T2 Mini eries Mini Nitrogen Gas prings One-half inch diameter T2-50 Three-quarter inch diameter T2-90 One-inch diameter T2-180 tripper springs with special model conforming to GM Global tandard Table of
Tanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS)
Tanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS) Tanker 400 XP Series Nitrogen Gas Springs IDEAL NITROGEN GAS SPRINGS FOR HIGH
T2 ISO Series. New flex guide accepts normal die movement. Fully meets ISO 11901, NAAMS, Chrysler, Ford and General Motors Die Standards
New flex guide accepts normal die movement T2 ISO Series Fully meets ISO 11901, NAAMS, Chrysler, Ford and General Motors Die Standards Seven models from NP-500 to NP-10000 Secondary piston ring assembled
T2 ISO Series. Fully meets ISO 11901, NAAMS, Chrysler, Ford and General Motors Die Standards
T2 ISO Series Fully meets ISO 11901, NAAMS, Chrysler, Ford and General Motors Die Standards Secondary piston ring assembled onto rod Guide features built-in pressure relief if assembled upside down Modular
SRS Series. Smooth Return Gas Springs
Smooth Return Gas Springs SRS Series Built in return stroke speed dampening reduces pad bounce as much as 90%! Increases part transfer efficiency Stroke lengths from 125 mm to 300 mm Retrofits to existing
Nitro-Dyne. XP Manifold Cylinders and Systems S OLID AS A R OCK!
H Y S O N P R O U C T S Nitro-yne XP Manifold Cylinders and Systems S OLI S R OCK! I n t r o d u c t i o n In 1964, we delivered our first manifold system to a customer who chose it for its consistent
TANKER T AND TANKER S SERIES
High Force and Long Strokes TANKER T AND TANKER S SERIES High force in short heights with contact forces to 15,400 bs. Stroke engths to 225 mm Dynamic ubrication extends spring ife Bore sea resists contamination
Gas Spring Service & Maintenance Accessories
Gas Spring Service & Maintenance Accessories Introduction Service & Maint. Accessories ACCESSORIES FOR SERVICING HYSON NITROGEN GAS SPRINGS AND HOSE SYSTEMS Table of Contents Page Accessories... 1 Charging
T3F Series HIGH FORCE GAS SPRINGS WITH G1/8 CHARGING PORT INTRODUCING COMPLETE RANGE OF GAS SPRINGS MEETING FCA GLOBAL DIE ENGINEERING STANDARDS
TF Series HIGH FORCE GAS SPRINGS WITH G1/8 CHARGING PORT INTRODUCING COMPLETE RANGE OF GAS SPRINGS MEETING FCA GLOBAL DIE ENGINEERING STANDARDS GENUINELY HYSON Since 196 HYSON Metal Forming Solutions has
Tanker B Series. High Force, High Performance Interstate 20 Kennedale, TX 76060
H&O DIE SUPPLY, INC. sales@hodie.com 800-222-5441 High Fce, High Perfmance Tanker B Series F existing dies only Over 25% me fce than the Super Tanker Series it replaces Dynamic lubrication extends spring
DYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS
Cam Units DYNE-A-CAM SERIES IDEAL FOR PIERCING, FLANGING, CUTTING AND FORMING OPERATIONS CAM Units v9.indd 1 6/18/2015 4:59:50 PM Introduction Dyne-A-Cam Series IDEAL FOR PIERCING, FLANGING, CUTTING AND
T5 Series. Ultra High-Force, Compact-Design Nitrogen Gas Springs. Ultra High-Force, Compact-Design Nitrogen Gas Springs.
T5 Series T5-500 to T5-1900 Ultra High-Force, Compact-Design Nitrogen Gas Springs Ultra High-Force, Compact-Design Nitrogen Gas Springs APPROVED 97/23/EC T5 Series Ultra-High Force, Compact-Design Nitrogen
Nitro-Dyne XP Manifold Cylinders and Systems
Nitro-yne XP Manifold Cylinders and Systems Introduction In 1964, we delivered our first manifold system to a customer who chose it for its consistent force with every stroke, force adjustability, reduced
DualSeal 24 Hose System
DualSeal 24 Hose System THE PREFERRED HOSE SYSTEM IDEAL FOR CONNECTING NITROGEN GAS SPRINGS AND ENSURING A BALANCED LOAD METAL FORMING SOLUTIONS DualSeal 24 System The Preferred Hose System IDEAL FOR CONNECTING
Hose System Accessories FEATURING COMPONENTS THAT PROVIDE THE MOST FLEXIBILITY, RELIABILITY AND CONTROL FOR YOUR GAS SPRING SYSTEM
Hose System Accessories FEATURING COMPONENTS THAT PROVIDE THE MOST FLEXIBILITY, RELIABILITY AND CONTROL FOR YOUR GAS SPRING SYSTEM Introduction Hose System Accessories FEATURING COMPONENTS TO GIVE THE
Tanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS)
Tanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS) Tanker 400 XP Series Heavy Duty Gas Springs GENUINELY HYSON Since 1964, HYSON
Gas Spring Service & Maintenance Accessories
H&O DIE SUPPLY, INC. sales@hodie.com 800-222-5441 Gas Spring Service & Maintenance Accessories www.hodie.com H&F SVC&MAINT Accessories V10.indd 1 7200 Interstate 20 Kennedale, TX 76060 6/19/2015 8:22:23
Micro24 TM Hose & Tube System
Micro24 TM Hose & Tube System THE COMPACT HOSE & TUBE SYSTEM IDEAL FOR HOSING APPLICATIONS IN SMALLER AND PROGRESSIVE DIES WHERE SPACE IS LIMITED. METAL FORMING SOLUTIONS TM Micro24 System The Compact
NPL Series LOW HEIGHT GAS SPRINGS PLL I CATIONS WHERE IGHT IS RESTRICTED
NPL Series LOW HEIGHT GAS SPRINGS IDEAL EAL FFOR O R STAMPING APPLICATIONS PLL I CATIONS WHERE HEIGHT IGHT IS RESTRICTED NPL Series 2 1-800-876-4976 440-526-5900 www.hysonproducts.com Hyson Products 2014
High Temp. Mold Series HIGH TEMPERATURE GAS SPRINGS
High Temp. Mold Series HIGH TEMPERATURE GAS SPRINGS IDEAL L FOR THE HIGHER WORKING TEMPERATURES TYPICAL T IN PLASTIC MOLDS T2M & T3M Series GENUINELY HYSON Since 1964 Hyson has been dedicated to providing
T2 Mini Series MINI NITROGEN GAS SPRINGS IDEAL FOR: REPLACING COIL SPRINGS STOCK LIFTING & EJECTION
T2 Mini Series MINI NITROGEN GAS SPRINGS IDEAL FOR: REPLACING COIL SPRINGS STOCK LIFTING & EJECTION T2 Series Mini Nitrogen Gas Springs Table of Contents Page Introduc on, Ordering Informa on 1 FOR REPLACING
Ram Cushions and Pressure Parallels Dynamic Solutions For A Global Market
Nitro-Dyne Ram Cushions and Pressure Parallels APPROVED 97/23/EC Dynamic Solutions For A Global Market Nitro-Dyne Ram Cushions and Pressure Parallels Table of Contents Page Introduction...2 The Advantages...3
Stock Lifters IDEAL FOR IMPROVED PART HANDLING THROUGH GUIDED LIFTING SYSTEMS. Hyson
Stock Lifters IDEAL FOR IMPROVED PART HANDLING THROUGH GUIDED LIFTING SYSTEMS 1 Introduction Stock Lifters GENUINELY HYSON Since 1964, HYSON has been dedicated to providing safer and more reliable products
T4 Series HEAVY DUTY GAS SPRINGS IDEAL FOR STAMPING ULTRA HIGH STRENGTH STEELS
T4 Series HEAVY DUTY GAS SPRINGS IDEAL FOR STAMPING ULTRA HIGH STRENGTH STEELS T4 Series 2 T4 Series IDEAL FOR STAMPING ULTRA-HIGH STRENGTH STEELS Table of Contents Page PED - Pressure Equipment Direc!ve...
HOW THE SPRAGUE PRODUCTS BOOSTERS WORK
SUPERCHARGE SHOP AIR OR BOTTLED GAS WITH SPRAGUE PRODUCTS GAS BOOSTER Sprague Products pneumatic boosters offer a cost effective way to compress shop air or bottled gas to meet various requirements for
A Series Piston Accumulators. 0.5 to 300 Litres, 250 and 350 bar
Series Piston ccumulators 0.5 to 300 Litres, 250 and 350 bar Description Piston ccumulators up to 80 Litres volume, 200 ore, 250 ar & 350 ar.parker series piston accumulators offer quality design and premium
Catalog No. C12119B. Nitrogen Gas Spring Lifters. Lifters for Single-Point, Multi-Point and Rail Lift Applications
atalog No. 12119B Nitrogen Gas pring Lifters L eries Lifters for ingle-point, Multi-Point and Rail Lift Applications Nitrogen Gas Lifters Introduction High Quality onstruction The global leader in nitrogen
For efficient, economical bale handling.
-SERIES LE LMPS For efficient, economical bale handling. Efficiently and economically handle nearly any type of baled product. PPLITIONS ascade bale clamps can efficiently and economically handle nearly
Best Under Pressure 3500 EBV. Safety Valve Oct 2008-CO
est Under Pressure 300 EV Safety Valve www.dresser.com 300 Oct 2008-CO 742 resser 300.qxd 9/29/0 8:10 AM Page 1 300 Scope of esign The CONSOIATE Series 300 Electromatic all Valve is designed to provide
T4 Series HEAVY DUTY GAS SPRINGS IDEAL FOR STAMPING ULTRA-HIGH STRENGTH STEELS HYSON 2018
T4 Series HEAVY DUTY GAS SPRINGS IDEAL FOR STAMPING ULTRA-HIGH STRENGTH STEELS 1 Introduction Heavy Duty Gas Springs GENUINELY HYSON Since 1964, HYSON has been dedicated to providing safer and more reliable
Worm Gear Hand Winches Up to 4000 lb capacity
IO 900 ertified Worm Gear and Winches Up to 4000 lb capacity achine ut Worm Gears provide accurate operation and long lasting service. nclosed Oil ath provides continuous lubrication of gears to minimize
Model FDD Dynamic Curtain Fire Damper 1-½ or 3 Hour, UL555 Listed
Tag: Project: Engineer: Contractor: Location: ate: pplication: rchitect: Submitted by: The NC model F fire damper utilizes a curtain style blade to prevent the spread of fire through a penetration in a
Air Driven Gas Boosters
Features & Benefits Sprague Products pneumatic boosters offer a cost effective way to compress shop air or bottled gas to meet various requirements for higher pressure, lower volume air or gas. Industrial
KITCHEN VENTILATION SOLUTIONS
KITHN VNTILTION SOLUTIONS HOO LINRS XHUST NS SILNRS IMPROVING INOOR IR QULITY THROUGH TTR VNTILTION June 0 SK00 www.fantech.net KITHN VNTILTION SOLUTIONS Today s kitchens have become much more than a place
Non-Adjustable Series Hydraulic Shock Absorbers TK, STH Micro-Bore Series. Non-Adjustable Series. Overview. Features and Benefits
TK Hydraulic Shock bsorbers TK, STH Micro-Bore Series Overview TK 10 Series TK 21 Series TK 6 Series ENIDINE non-adjustable micro-bore hydraulic shock absorbers can accommodate varying energy conditions.
O-Ring Face Seal Hose
Hose TRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS Table of Contents Page Introduction... 1 Safety Guidelines... 2 Control
SINGLE ACTING TELESCOPIC
SINGLE TING TELESOPI RM is pleased to offer a full line of standard telescopic designs for your equipment. These designs are pre-engineered using in stock material and internal components for quick order
Adams. Progressive. Description. Typical system layout using Pneumatic Pump for grease - with monitoring. Typical system
45 P rogressive systems can be used for oil or grease lubrication when it is required to provide a positive displacement with visual or electrical monitoring. ll outlets can be checked by one indicator
PED 97/23/EC COMPLIANT. Full and Compact Height Nitrogen Gas Springs Series Full Height / Matches ISO Standards
atalog No. 10108A Full and ompact Height 90.10 / 90.8 eries 90.10 eries Full Height / Matches IO tandards 90.8 eries ompact Height Alternative PED 97/23/E OMPIANT 2 Introduction The global leader in nitrogen
Product Description TORNADO. Benefits. Features. Application
Lighting Product escription TORNAO The Helix range is a twist-shape compact fluorescent lamp, with optimal light distribution.it is available in 11W, 15W, 20W and 23W (25W), with lumen equivalence of 60W,
MagHex Fan Controller
MagHex Fan ontroller 0916 ompact Programmable Temperature Sensor This combined sensor and controller is designed to mount directly to the heat exchanger. It provides accurate temperature control by cycling
Product Description TORNADO. Benefits. Features. Application
Lighting Product escription TORNAO The Helix range is a twist-shape compact fluorescent lamp, with optimal light distribution.it is available in 11W, 15W, 20W and 23W (25W), with lumen equivalence of 60W,
Work supports - Collet-Lok design
ork supports - ollet-ok design Shown: PS-1, PTS-1 Hydraulically locked, mechanically maintained work support ollet-ok products ollet-ok design allows the work support to maintain support position after
PED 2014/68/EU COMPLIANT. Full and Compact Height Nitrogen Gas Springs Series Full Height / Matches ISO Standards
atalog No. 17102 Full and ompact Height 90.10 / 90.8 eries 90.10 eries Full Height / Matches IO tandards 90.8 eries ompact Height Alternative PED 14/68/EU OMPIANT Introduction The global leader in nitrogen
VG2000 Series Cast Iron Flanged Globe Valves
Installation Instructions VG2000 Issue ate November 15, 2002 VG2000 Series ast Iron Flanged Globe Valves pplication VG2000 Series ast Iron Flanged Globe Valves are primarily designed to regulate the flow
ZEM Injector. Series 32, 33, 34, 35, 39. General. Operation. Features. Technical Data. Injector Outputs R2 08/10
ZEM Series 32, 33, 34, 35, 39 General The ZEM Series injector line are positive displacement injectors (PDI) that deliver precise and controlled lubrication outputs which meet exact requirements for diverse
Model ZW204 Non-Modulating Float Valve
Model Z04 Non-Modulating loat Valve pplication The Zurn ilkins Model Z04 Non-Modulating loat Operated ontrol Valve is designed to be either fully open or fully closed in response to the position of the
Your Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
Nex Flow Offers Pneumatic Accessories to help reduce noise levels and improve the environment as well for better operation of product.
ex Flow Offers Pneumatic Accessories to help reduce noise levels and improve the environment as well for better operation of product. ex Flow and their master distributors and agents worldwide offer and
Temperature Sensors. How to Order Consult factory for pricing and lead time. Normally Open (Closed on temperature rise)
Temperature Sensors 0916 Normally Open (losed on temperature rise) ontact Rating 6 MPS T 120 V 4 MPS T 240 V Voltage 0.1 to 240 volts or 12 VD 8 MPS, 24 VD 4 MPS Pressure 1,000 PSI operating Material 303
Piston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
Catalog No. C Super Compact Nitrogen Gas Springs. SC Series
atalog No. 09101 uper ompact Nitrogen Gas prings eries uper ompact Nitrogen Gas prings Introduction DADO produces top quality products at competitive prices and provides a superior level of customer service.
SCHMIDT HydroPneumaticPress
SCHMIDT HydroPneumaticPress C-rame design eatures The C-rame design offers full accessibility when manually inserting and removing parts Easy adaptation to different tool and part heights because of simplistic
Models 1800/2000 Regulators Data Sheet
S86 M Quality System QMI is ccredited by: ISO 900 ertified utch ouncil for ccreditation Models 0/000 Regulators ata Sheet vailable Models 0 Series low pressure models have a maximum inlet pressure of and
Just light that you can install and forget
Lighting Just light that you can install and forget Economy stick Entry non-covered energy saving lamp, Long life with low energy consumption. Product consists of Philips quality at everyday low price
Model FD Static Curtain Fire Damper 1-½ or 3 Hour, UL555 Listed
Tag: Project: Engineer: Contractor: Location: ate: pplication: rchitect: Submitted by: The NC model F fire damper utilizes a curtain style blade to prevent the spread of fire through a penetration in a
Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* M 2492 S. Released
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 2520VQSV10* ***** ******* 20* Released 08 01 95 M 2492 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released M 2496 S
Service ata Vickers Vane Pumps Vane Type Triple Pump (F3) 4525VQSV10* ***** ******* 20* Released 08 01 95 M 2496 S 10 SE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin olt olt
Control and Automation
onsumer & ndustrial Power Protection ontrol and utomation or industrial applications.03 imagination at work Plug-in relays and uxiliary contactors Motor protection devices ontactors and Thermal overload
Nex Flow Offers Pneumatic Accessories to help reduce noise levels and improve the environment as well for better operation of product.
AESSORIES ex Flow Offers Pneumatic Accessories to help reduce noise levels and improve the environment as well for better operation of product. ex Flow and their master distributors and agents worldwide
OEM Series Actuators: Table of Contents OEM Series OEM 1-1/4 (OC) Series... pg. 2 How to Order: OEM 1-1/4 (OC) Series... pg. 3 imensional ata... pg. 4
OEM Series Actuators: Table of Contents OEM Series OEM 1-1/4 (OC) Series... pg. 2 How to Order: OEM 1-1/4 (OC) Series... pg. 3 imensional ata... pg. 4 OEM 2-1/2 (OT) Series... pg. How to Order: OEM 2-1/2
MI-ComPAC DC-DC Switchers
MI-omP - Switchers 5 3 Watts; 1 3 Outputs eatures & enefits Inputs 28 and 27V Transient protection: 28V designed to meet MIL-ST-74-, MIL-ST-1275// and O-16 One, two or three outputs Outputs: 2 48V Up to
Energy Saver Compact Fluorescents - Going green never looked so good
Lighting Energy Saver ompact luorescents - Going green never looked so good Energy Saver T2 The Philips EnergySaver T2 provides energy efficient lighting in a smaller, sleeker, size that fits more fixtures.
Electronic Temperature Control & Bulb Well Assembly (AC)
Electronic Temperature ontrol & ulb Well ssembly () 0916 86816 This is a line voltage single-stage electronic temperature control with singlepole, double-throw relay output and LED indication. It is designed
Push-back Probes. Push-back Probes VF VF VF VF 5 167
Technical Information ontents V 25 164 V 3 165 are used when checking the locking in of the connector contacts into connectors. The are available with spring forces up to 34N, which represents the spring-force
DIRECT REPLACEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP STRETCHING CYLINDERS
SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD P Quality SIDEL Support Delivery PLASTIC PACKAGING COMPONENTS P ASTIC PACKAGING COMPONENTS GRO DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
INLINE 1100 STAGED PALLET SYSTEM. franklinwater.com
INLINE 00 STAGED PALLET SYSTEM The Franklin Electric Inline 00 SpecPAK TM Pressure Boosting System connects easily to nearly any commercial, industrial, or multi-residential plumbing configuration to provide
3-Way Linked Globe Valve Assemblies with Linear Series Actuators
Linked Globe Valve ssemblies with Linear Series ctuators Note: hoose a valve assembly having a close-off pressure capability sufficient for the application. Not all valve body and actuator combinations
Catalog No. C09101B. SC Series. Super Compact Nitrogen Gas Springs PED 2014/68/EU COMPLIANT
atalog No. 09101B uper ompact Nitrogen Gas prings eries PED 2014/68/EU OMPIANT uper ompact Nitrogen Gas prings Introduction DADO produces top quality products at competitive prices and provides a superior
8.5 Service of the Actuator PNC4508M02 Series
8.5 Service of the ctuator N4508M02 Series 8.5.1 echnical Data N4508M02-F, N4508M02-R Doc003635.png Doc003653.png () (B) () LOSED O OOLING ctuator, bolted to manifold. Valve pin operation Operation medium
Hydraulic Systems Hydraulic Clamping
ydraulic Systems 19. 1 ydraulic lamping Page ydraulic lamping Page 1-21-4 1-21-51 1-21-72 1-211-2 1-211-4 1-211-52 1-211-54 1-212-4 19.2-19.3 3-1-S-475 3-1--475 19.6 52-Series 19.3 3-1-S-11 19.7 3-1--11
Ripac Vario-Module 2U
Ripac Vario-Module U IE 60 97- for installation in 48.6 mm (9 ) racks. to IE 60 97-3-0. Material/Surface finish: spray-finished in RL 7035 orner trims: spray-finished in RL 7035 Side trims: spray-finished
8.2 Service of the Actuator HYC4018M Series
8.2 Service of the ctuator HY4018M Series 8.2.1 echnical Data HY4018M03-F/-R, HY4018M04-F/-R, HY4018M05-F/-R ctuator, bolted to manifold. Valve pin operation Operation medium Operating pressure ressure
8290 Series. Angle Body Piston Valves. Introducing the all NEW 8290 Assembly Configurator
4 82 Series Angle ody Piston Valves Introducing the all NW 82 Assembly onfigurator road range of pressure operated valves for air, water, steam, and light slurries ronze & stainless steel constructions
VG4000 Series. High-Capacity/High-Closeoff Electric Zone Valves
Product ulletin VG000 Issue ate 11/01/01 VG000 Series High-apacity/High-loseoff Electric Zone Valves VG000 Series High-apacity/High-loseoff Electric Zone Valves are designed to regulate the flow of water
Right Angle Control Valve 7051
Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium
Pascal N2 Gas Balancer
Pascal N2 Gas Balancer modeldng BLNCER for SPINDLE HED CE marking Pressure Equipment Directive (97/23/EC) Japan Patent NO.4010525 & 3942365 US Patent NO.6,883,789 Germany Patent NO.60213368.8 www.pascaleng.co.jp
CHECK VALVE - DIRECT OPERATED - Series VC4V SPECIFICATIONS PERFORMANCE CURVES VC4V03 VC4V10 VC4V06
CHECK VLVE - DIRECT OPERTED - Series VV Veljan Direct operated Check Valve Series VV are poppet type and designed for a maximum pressure of 35 bar and a flow capacity rangg from 18 l/m for a 3/8 valve
HYDROCAM The Ultimate in Flexible Cam Design HYDROCAM is Protected by U.S. and International Patents
REDY HYDROCM The Ultimate in Flexible Cam Design HYDROCM is Protected by U.S. and International Patents HYDROCM Introduction Simple, Proven & Reliable HYDROCM is: Ideal for piercing, forming or flanging
RM310 PEAK POWER 7.5kW (10HP) PERFORMANCE DATA
M PK POW.kW (HP) POMN T Holes Ø (.") on P... (.") iller/ reather xhaust Ø (") lange Oil drain plug (Level plug vertical mounting) Inlet & secondary exhaust adaptor plate -ports tapped " SP (deleted when
D I V I S I O N O F M A R S H B E L L O F R A M
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
pneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
KEY FEATURES. Product Overview. Product Line Drawing
Main Valves Options Model 106-C 106-PG-C Globe KEY FETURES Solves high pressure drop problems Controls variable flows & vibration Significantly reduces noise Self-contained actuators not required Customizable
INLINE 1100 COMPACT, MULTI-PUMP SYSTEM. franklinwater.com
INLINE 0 COMPACT, MULTI-PUMP SYSTEM The Franklin Electric Inline 0 SpecPAK Pressure Boosting System connects easily to nearly any commercial, industrial, or multi-residential plumbing configuration to
grundfos smartflo SmartFlo System Sizing Pocket Guide Curves and sizing information for all SmartFlo systems
grundfos smartflo SmartFlo System Sizing Pocket Guide Curves and sizing information for all SmartFlo systems Contents SQE Curves - 3, rpm to 1,7 rpm 5SQE System Curves... 3-11 1SQE System Curves... 12-17
NFH Low Pressure Filters
PPLICTIONS NFH Low Pressure Filters Pressures to 360 psi Flows to 450 gpm Water Removal Capability 4 Ports HYDC NFH In-line Return Filters are designed for use on hydraulic power units, machine tools,
1500 Group Tips One-Piece Acetylene
One-Piece Acetylene 502 Series Hand or Machine Tips Preheat Cleaning in. mm in. mm Holes Preheat in. m /4 6 /4 6 08Z67 6 69 68.7 /2 3 /2 24 5Z7 6 66 60.5 -/2 38 -/2 38 5Z8 6 65 53.3 2-4 50-00 4 02 5Z9
10.7 Single Valve Gate Nozzle GAN...S01
Single Valve Gate Nozzle GN...S01 10.7 Single Valve Gate Nozzle GN...S01 10.7.1 echnical Data - Single Valve Gate Nozzle GN...S01 Doc003429.png Single Valve Gate Nozzle Valve pin operation Operation medium
Variable Displacement Piston Pumps. Performance Information. Features. Specifications. Controls. Schematic Symbol (Basic Pump) Weight and Package Size
Catalog HY13-1552-2/US Technical Information Series PVC65 Performance Information Series PVC65 Compensated, Variable Volume, Piston Pump Features High Strength Cast-Iron Housing uilt-in Supercharger High
Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type
Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.
INLINE 1100 COMPACT, MULTI-PUMP SYSTEM
INLINE 00 COMPACT, MULTI-PUMP SYSTEM The Franklin Electric Inline 00 SpecPAK TM Pressure Boosting System connects easily to nearly any commercial, industrial, or multi-residential plumbing configuration
TOX -Powerpackage: The complete drive family for press forces from kn
MTRI VRSI TX -Powerpackage: The complete drive family for press forces from 2 2000 k The TX -Powerpackage is available with different press forces, strokes and structural shapes. Selection criteria: 1)
Advanced Air Driven Gas Boosters and Amplifiers. Sprague. Air Amplifiers. Gas Boosters
Advanced Air Driven Gas Boosters and Amplifiers Sprague Gas Boosters Air Amplifiers Gas Boosters and Systems Works off compressed air supplies Operates quietly Features mechanical separation between air
1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
PCB layouts. High Density D only. 50 way 50 way DIMENSIONS. 15 way High Density D 26 way High Density D. 62 way High Density D. 44 way High Density D
Straight p.c. - way 0º p.c. - way P layouts 2.84 S 2 Ø 0.76 min. S 2 Ø 0.76 min. Plug viewed from above, socket viewed from below. 2 holes at Ø 3.2 min. (2 holes at Ø 3.0/3. boardlock only)* ONT 2 holes
P95H Regulator Applications P95H Part Matrix Specifi cations Materials of Construction P95H Flow Coeffi cients Wide Open Coeffi cients
PH Regulator Large Capacity Working Media Include ir, Steam and Liquids ll Vents are Tapped The PH is a direct operating pressure reducing regulator with large capacity. Ideally suited for uses in oil
APCO CVS-6000/6000A SWING CHECK VALVES
ULLTIN 00/579 JUN 2016 PO S-00/00 SING K LS PO S Swing heck s are recommended for clean and dirty services such as ater, Sewage or Industrial applications. S-00/00 Swing heck s are a heavily constructed,