Catalog No. C Gestamp Specific Selected Products PED 2014/68/EU COMPLIANT

Size: px

Start display at page:

Download "Catalog No. C Gestamp Specific Selected Products PED 2014/68/EU COMPLIANT"

Horace Bradley
5 years ago
Views:

1 atalog No PED 2014/68/EU OMPIANT

Introduction The global leader in nitrogen gas spring technology DADO produces top quality products at competitive prices and provides a superior level of customer service.

2 Introduction The global leader in nitrogen gas spring technology DADO produces top quality products at competitive prices and provides a superior level of customer service. Founded in 1958, DADO is the highest volume producer of gas springs for press tools. DADO s products are widely approved and used in global operations for many industries including metal stamping, automotive and plastic injection molding. inked omponents Piping gas springs together permits the monitoring, control, and adjustment of force from outside the die. DADO offers a wide selection of hoses, fittings, control panels and equipment to simplify the piping process. The inked ystems omponents are found on pages For training and technical assistance contact DADO. Products DADO offers a specific sub-set of our comprehensive product line to match the Gestamp global standards specification. These products are outlined on this page with details provided later in this catalog. Nitrogen Gas prings Refer to the table below to select the gas spring needed based on model number, force or diameter. DADO Model Force Diameter Page.045 0,45 kn ø ,9 kn ø ,0 kn ø25 5 U ,7 kn ø19 6 U ,5 kn ø32 7 U kn ø38 8 U ,5 kn ø44,5 9 U kn ø50 10 U kn ø63 11 U kn ø75 12 U kn ø95 13 U kn ø U kn ø ,5 kn ø kn ø44, ,5 kn ø kn ø kn ø kn ø kn ø kn ø Mount options for the above models are found on pages DADO s complete product line is available at our website, Plated ylinder with econdary Wiper DADO s offers additional protection against caustic fluid with the Plated ylinder with econdary Wiper option for the nitrogen gas springs. These cylinders may be ordered with the simple addition of a Q in the part number. Refer to page 26 for more information. Die torage olutions DADO s offers two die storage solution products: D Die torage Nitrogen Gas prings are installed into the die from the design and are not removed during operation and the TE Die torage Blocks that are placed into an already existing die during storage. These solutions are found on pages Guide Retainer ets (GR) DADO s Guide Retainer ets (GR) replace coon pins, bushing an spools to provide guidance and retention in the die. The GR eries is offered in four rod diameters with multiple mount options and customized lengths. These products are found on pages ustomized ystem for Delay Return Operation The Delay Return ystem (DR) is custom designed based on the application requirements. A DR is used when the cylinders need to remain retracted for a few moments during operation to prevent the deformation of the formed part. pecifications and requirments are found on pages Warranty DADO warrants its nitrogen gas springs to be free from defects in workmanship or materials for a period of one year from date of manufacture. AD Templates On-line DADO s entire product line is available on-line in solid models and 2D AD formats. For more information, visit our website, or contact DADO. 2

3 .045 0,50 kn ø ±0, ø10,4 R0, ø12 h11 5 Recoended Mount Option x 1 Tap 7 Deep NF Refer to page 24 for mount information. Force harts On-ontact Force 80 bar dan 75 Based on charge Initial Final Pressure of 177 bar olor 70 dan dan bar Yellow - YW Red - RD dan Blue - BU Green - GR Black - BK ee hart TRAVE (%) Part Number: Includes eries (), Model and troke ength. Mounts ordered with cylinder will be attached at the factory. FORE (dan) BK.150 MAXIMUM REOMMENDED TRAVE 90% harging Pressure: bar. YW, RD, BU, GR or BK. When not specified, default is BK.150 bar. 3

4 .090 0,9 kn ø ±0, ø17 R ø19 h11 5 Recoended Mount Option x 1 Tap 7 Deep VFA Refer to page 24 for mount information. Force harts olor Initial Final dan dan Yellow - YW Red - RD Blue - BU Green - GR Purple - PR Pressure bar Orange - OR Black - BK ee hart Part Number: Includes eries (), Model and troke ength. On-ontact Force bar dan Mounts ordered with cylinder will be attached at the factory. FORE (dan) BK.150 Based on charge of 177 bar 89 dan TRAVE (%) harging Pressure: bar. YW, RD, BU, GR or BK. When not specified, default is BK.150 bar. MAXIMUM REOMMENDED TRAVE 90% 4

.180 2,0 kn ø12 2 ±0,4 17.180.010 10 52 62.180.015 15 57 72 ø23 R1.180.025 25 67 92.180.050 50 92 142.180.080 80 125 205.180.125 125 170 295 ø25h11 5 Recoended Mount Option x 1 Tap 7 Deep VFA Refer to page 24 for mount information.

5 .180 2,0 kn ø12 2 ±0, ø23 R ø25h11 5 Recoended Mount Option x 1 Tap 7 Deep VFA Refer to page 24 for mount information. Force harts olor Initial Final dan dan Yellow - YW Red - RD Blue - BU Pressure bar Green - GR Black - BK ee hart Part Number: Includes eries (), Model and troke ength. Mounts ordered with cylinder will be attached at the factory. On-ontact Force bar dan 290 Based on charge of 177 bar dan TRAVE (%) FORE (dan) BK.150 MAXIMUM REOMMENDED TRAVE 90% harging Pressure: bar. YW, RD, BU, GR or BK. When not specified, default is BK.150 bar. 5

U.0175 1,7 kn ø11 12,5 ±0,4 U.0175.010 10 40 50 U.0175.025 25 55 80 U.0175.050 50 80 130 R1 ø17 U.0175.080 80 115 195 U.0175.125 125 160 285 5 ø19 h11 x 1 Tap 7 Deep Recoended Mount Option TO - Basic Model VFA Refer to page 24 for mount information.

6 U ,7 kn ø11 12,5 ±0,4 U U U R1 ø17 U U ø19 h11 x 1 Tap 7 Deep Recoended Mount Option TO - Basic Model VFA Refer to page 24 for mount information. Force harts On-ontact Force bar dan FORE (dan) Based on charge of 180 bar 171 dan MAXIMUM REOMMENDED TRAVE 90% TRAVE (%) 6 Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. U TO harging Pressure: bar. When not specified, default is 180 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is.

U.0400 3,6 kn ø16 12,5 ±0,25 U.0400.013 12,5 42,5 55 U.0400.025 25 55 80 U.0400.038 37,5 67,5 105 R1 U.0400.050 50 80 130 U.0400.080 80 110 190 U.0400.100 100 130 230 U.0400.125 125 155 280 7 4 ø27 Recoended Mount Options ø32 2 x 6 Deep B12 B21 20 TO - Basic Model B25 B319V Refer to pages 24-25 for mount information.

100 TRAVE (%) TRAVE (% ) MAXIMUM REOMMENDED TRAVE 90% Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO.

7 U ,6 kn ø16 12,5 ±0,25 U ,5 42,5 55 U U ,5 67,5 105 R1 U U U U ø27 Recoended Mount Options ø32 2 x 6 Deep B12 B21 20 TO - Basic Model B25 B319V Refer to pages for mount information. Force harts On-ontact Force bar dan FORE (dan) Based on charge of 180 bar dan TRAVE (%) TRAVE (% ) MAXIMUM REOMMENDED TRAVE 90% Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. U TO harging Pressure: bar. When not specified, default is 180 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is. 7

U.0600 4,7 kn M8 ø20 12,5 ±0,25 U.0600.013 12,5 42,5 55 U.0600.025 25 55 80 U.0600.038 37,5 67,5 105 R1 U.0600.050 50 80 130 U.0600.080 80 110 190 U.0600.100 100 130 230 U.0600.125 125 155 280 7 4 ø33 ø38 Recoended Mount Options ø25 45 B312 B21 4 x 6 Deep TO - Basic Model 20 B25 B319V Refer to pages 24-25 for mount information.

TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% 8 Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO.

8 U ,7 kn M8 ø20 12,5 ±0,25 U ,5 42,5 55 U U ,5 67,5 105 R1 U U U U ø33 ø38 Recoended Mount Options ø25 45 B312 B21 4 x 6 Deep TO - Basic Model 20 B25 B319V Refer to pages for mount information. Force harts On-ontact Force bar dan FORE (dan) Based on charge of 150 bar 471 dan TRAVE (%) TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% 8 Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. U TO harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is.

U.0800 7,3 kn M8 ø25 16,5 R1 ±0,25 U.0800.013 12,5 44,5 57 U.0800.025 24,8 56,8 81,6 U.0800.038 37,5 69,5 107 U.0800.050 50 82 132 U.0800.080 80 112 192 U.0800.100 100 132 232 U.0800.125 125 157 282 8 4 ø40 Recoended Mount Options ø44,5 2 x M8 6 Deep B312 B21 20 B25 B319V Refer to pages 24-25 for mount information.

9 U ,3 kn M8 ø25 16,5 R1 ±0,25 U ,5 44,5 57 U ,8 56,8 81,6 U ,5 69,5 107 U U U U ø40 Recoended Mount Options ø44,5 2 x M8 6 Deep B312 B21 20 B25 B319V Refer to pages for mount information. TO - Basic Model Force harts On-ontact Force bar dan FORE (dan) Based on charge of 150 bar 736 dan MAXIMUM REOMMENDED TRAVE (%) TRAVE 90% Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. U TO harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is. 9

U.1000 9,2 kn M8 ø28 17,5 ±0,25 U.1000.016 16 54 70 R2 U.1000.025 25 63 88 U.1000.038 37,5 75,5 113 U.1000.050 50 88 138 U.1000.080 80 118 198 U.1000.100 100 138 238 U.1000.125 125 163 288 13 8 ø43 ø50 Recoended Mount Options 2 x M8 6 Deep B12 B21 20 B25 B319V Refer to pages 24-25 for mount information.

10 U ,2 kn M8 ø28 17,5 ±0,25 U R2 U U ,5 75,5 113 U U U U ø43 ø50 Recoended Mount Options 2 x M8 6 Deep B12 B21 20 B25 B319V Refer to pages for mount information. TO - Basic Model Force harts On-ontact Force bar kn 150 9, , , , , , ,23 FORE (kn) Based on charge of 150 bar 9,24 kn MAXIMUM REOMMENDED TRAVE (%) TRAVE 90% 10 Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. U TO harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is.

M8 ø36 U.1600 15 kn 19 ±0,25 U.1600.016 16 60 76 R2 U.1600.025 25 69 94 U.1600.038 37,5 81,5 119 U.1600.050 50 94 144 U.1600.080 80 124 204 U.1600.100 100 144 244 U.1600.125 125 169 294 13 8 ø56 ø63 Recoended Mount Options ø40 28,3 B212 B21 6 x M8 6 Deep 20 B325 B319V Refer to pages 24-25 for mount information.

11 M8 ø36 U kn 19 ±0,25 U R2 U U ,5 81,5 119 U U U U ø56 ø63 Recoended Mount Options ø40 28,3 B212 B21 6 x M8 6 Deep 20 B325 B319V Refer to pages for mount information. Force harts AO - Basic Model On-ontact Force bar kn , , , , , , ,04 Part Number: Includes eries (U), Model and troke ength. Mount Option: AO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. FORE (kn) Based on charge of 150 bar 15,27 kn U AO MAXIMUM REOMMENDED TRAVE (%) TRAVE 90% TRAVE (%) harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is. 11

U.2600 24 kn M8 ø45 19 ±0,25 U.2600.016 16 61 77 R2,5 U.2600.025 25 70 95 U.2600.038 37,5 82,5 120 U.2600.050 50 95 145 U.2600.080 80 125 205 U.2600.100 100 145 245 U.2600.125 125 170 295 7 8 ø67 ø75 Recoended Mount Options 4 x M8 6 Deep ø40 B12 B21 28,3 B325 B319V Refer to pages 24-25 for mount information.

12 U kn M8 ø45 19 ±0,25 U R2,5 U U ,5 82,5 120 U U U U ø67 ø75 Recoended Mount Options 4 x M8 6 Deep ø40 B12 B21 28,3 B325 B319V Refer to pages for mount information. TO - Basic Model Force harts On-ontact Force bar kn , , , , , , ,18 FORE (kn) Based on charge of 150 bar 23,86 kn TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% 12 Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. U TO harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is.

U.4600 42 kn ø60 M8 24 3 ±0,25 U.4600.016 16 74 90 R2,5 U.4600.025 25 83 108 U.4600.038 37,5 95,5 133 U.4600.050 50 108 158 U.4600.080 80 138 218 U.4600.100 100 158 258 U.4600.125 125 183 308 7 G 1/8 8 ø87 Recoended Mount Options ø95 4 x M8 12 Deep B12 B21 42,4 ø60 B25 B319V Refer to pages 24-25 for mount information.

13 U kn ø60 M ±0,25 U R2,5 U U ,5 95,5 133 U U U U G 1/8 8 ø87 Recoended Mount Options ø95 4 x M8 12 Deep B12 B21 42,4 ø60 B25 B319V Refer to pages for mount information. TO - Basic Model Force harts On-ontact Force bar kn , , , , , , ,65 FORE (dan) Based on charge of 150 bar 42,41 kn MAXIMUM REOMMENDED TRAVE (%) TRAVE 90% Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. U TO harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is. 13

U.6600 66 kn ø75 M8 25,5 3 ±0,25 U.6600.025 25 93 118 R2,5 U.6600.038 37,5 105,5 143 U.6600.050 50 118 168 U.6600.080 80 148 228 U.6600.100 100 168 268 U.6600.125 125 193 318 7 8 ø112 G 1/8 ø120 Recoended Mount Options 4 x M10 12 Deep ø80 B12 B21 56,6 B25 B319V Refer to pages 24-25 for mount information.

14 U kn ø75 M8 25,5 3 ±0,25 U R2,5 U ,5 105,5 143 U U U U ø112 G 1/8 ø120 Recoended Mount Options 4 x M10 12 Deep ø80 B12 B21 56,6 B25 B319V Refer to pages for mount information. TO - Basic Model Force harts On-ontact Force bar kn , , , , , , ,84 FORE (dan) Based on charge of 150 bar 66,27 kn MAXIMUM REOMMENDED TRAVE (%) TRAVE 90% 14 Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. U TO harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is.

U.9600 95 kn ø90 M8 27,5 3 ±0,25 R2,5 U.9600.063 62,5 140,5 203 U.9600.080 80 158 238 U.9600.100 100 178 278 U.9600.125 125 203 328 7 8 ø142 G 1/8 ø150 Recoended Mount Options 4 x M10 12 Deep B12 B21 70,7 ø100 B25 B319V Refer to pages 24-25 for mount information.

15 U kn ø90 M8 27,5 3 ±0,25 R2,5 U ,5 140,5 203 U U U ø142 G 1/8 ø150 Recoended Mount Options 4 x M10 12 Deep B12 B21 70,7 ø100 B25 B319V Refer to pages for mount information. TO - Basic Model Force harts On-ontact Force bar kn , , , , , , ,72 FORE (dan) Based on charge of 150 bar 95,43 kn TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% Part Number: Includes eries (U), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. U TO harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is. 15

16 ,7 kn 12,5 ø12 ±0, ,7 62,7 75, R ,5 4 ø27 Recoended Mount Options ø x 6 Deep B12 B21 TO Basic Model B25 B319V Refer to pages for mount information. Force harts On-ontact Force bar dan FORE (dan) Based on charge of 150 bar 170 dan TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% 16 Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory TO harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is.

90.10.00500 5 kn 16,5 M8 ø20 ±0,25 90.10.00500.025 25 110 135 90.10.00500.050 50 135 185 R1 2 90.10.00500.080 80 165 245 90.10.00500.125 125 210 335 4 4 ø44,5 G 1/8 ø40 Recoended Mount Options 20 2 x M8 12 Deep B312 B21 TO Basic Model B25 B319V Refer to pages 24-25 for mount information.

17 kn 16,5 M8 ø20 ±0, R ø44,5 G 1/8 ø40 Recoended Mount Options 20 2 x M8 12 Deep B312 B21 TO Basic Model B25 B319V Refer to pages for mount information. Force harts On-ontact Force bar dan FORE (dan) Based on charge of 150 bar 471 dan TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory TO harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is. 17

90.10.00750 7,5 kn 17,5 M8 ø25 ±0,25 90.10.00750.025 25 120 145 90.10.00750.050 50 145 195 R2 3 90.10.00750.080 80 175 255 90.10.00750.125 125 220 345 90.10.00750.160 160 255 415 7 8 ø43 ø50 G 1/8 Recoended Mount Options 20 2 x M8 12 Deep B12 B21 TO Basic Model B25 B319V Refer to pages 24-25 for mount information.

18 ,5 kn 17,5 M8 ø25 ±0, R ø43 ø50 G 1/8 Recoended Mount Options 20 2 x M8 12 Deep B12 B21 TO Basic Model B25 B319V Refer to pages for mount information. Force harts 18 On-ontact Force bar dan Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. FORE (dan) Based on charge of 150 bar 736 dan TRAVE (%) TO TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is.

90.10.01500 15 kn 21 M8 ø36 ±0,25 90.10.01500.025 25 135 160 R2,5 3 90.10.01500.050 50 160 210 90.10.01500.080 80 190 270 90.10.01500.125 125 235 360 90.10.01500.200 200 310 510 7 G 1/8 8 ø67 ø75 ø40 4 x M8 12 Deep 28,3 Recoended Mount Options B12 B21 TO Basic Model B25 B319V Refer to pages 24-25 for mount information.

19 kn 21 M8 ø36 ±0, R2, G 1/8 8 ø67 ø75 ø40 4 x M8 12 Deep 28,3 Recoended Mount Options B12 B21 TO Basic Model B25 B319V Refer to pages for mount information. Force harts On-ontact Force bar kn , , , , , , ,04 Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. FORE (dan) 22,00 20,45 18,90 17,35 15,80 Based on charge of 150 bar 15,27 kn 14, TRAVE (%) TO TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is. 19

90.10.03000 30 kn M8 24 ø50 ±0,25 90.10.03000.025 25 145 170 3 90.10.03000.050 50 170 220 90.10.03000.080 80 200 280 R2,5 90.10.03000.125 125 245 370 90.10.03000.200 200 320 520 7 4 x M8 12 Deep 8 ø87 ø95 ø60 G 1/8 Recoended Mount Options 42,4 B12 B21 TO Basic Model B25 B319V Refer to pages 24-25 for mount information.

20 kn M8 24 ø50 ±0, R2, x M8 12 Deep 8 ø87 ø95 ø60 G 1/8 Recoended Mount Options 42,4 B12 B21 TO Basic Model B25 B319V Refer to pages for mount information. Force harts 20 On-ontact Force bar kn , , , , , , ,93 Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. FORE (kn) 45,35 41,80 38,25 34,70 31,15 Based on charge of 150 bar 29,45 kn 27, TO TRAVE (%) TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is.

90.10.05000 50 kn M8 25,5 ø65 ±0,25 90.10.05000.025 25 165 190 90.10.05000.050 50 190 240 R2,5 3 90.10.05000.080 80 220 300 90.10.05000.125 125 265 390 90.10.05000.200 200 340 540 7 8 4 x M10 16 Deep ø112 ø120 ø80 G 1/8 Recoended Mount Options 56,6 B12 B21 TO Basic Model B25 B319V Refer to pages 24-25 for mount information.

21 kn M8 25,5 ø65 ±0, R2, x M10 16 Deep ø112 ø120 ø80 G 1/8 Recoended Mount Options 56,6 B12 B21 TO Basic Model B25 B319V Refer to pages for mount information. Force harts On-ontact Force bar kn , , , , , , ,64 Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. FORE (kn) 82,30 75,60 68,95 62,30 55,60 Based on charge of 150 bar 49,77 kn 48, TRAVE (%) TO TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is. 21

90.10.07500 75 kn 27,5 M8 ø80 ±0,25 90.10.07500.025 25 180 205 90.10.07500.050 50 205 255 3 90.10.07500.080 80 235 315 R2,5 90.10.07500.125 125 280 405 90.10.07500.200 200 355 555 7 8 ø142 ø150 G 1/8 Recoended Mount Options 4 x M10 16 Deep ø100 70,7 B12 B21 TO Basic Model B25 B319V Refer to pages 24-25 for mount information.

22 kn 27,5 M8 ø80 ±0, R2, ø142 ø150 G 1/8 Recoended Mount Options 4 x M10 16 Deep ø100 70,7 B12 B21 TO Basic Model B25 B319V Refer to pages for mount information. Force harts 22 On-ontact Force bar kn , , , , , , ,05 Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. FORE (dan) 117,90 109,00 100,10 91,20 82,30 Based on charge of 150 bar 75,40 kn 73, TRAVE (%) TO TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is.

90.10.10000 100 kn 33,5 M10 ø95 ±0,25 90.10.10000.050 50 210 260 90.10.10000.080 80 240 320 3 90.10.10000.125 125 285 410 R2,5 8 8 ø187 ø195 G 1/8 Recoended Mount Options 4 x M12 17 Deep ø120 84,9 B12 B21 TO Basic Model B25 Refer to pages 24-25 for mount information.

23 kn 33,5 M10 ø95 ±0, R2,5 8 8 ø187 ø195 G 1/8 Recoended Mount Options 4 x M12 17 Deep ø120 84,9 B12 B21 TO Basic Model B25 Refer to pages for mount information. Force harts On-ontact Force bar kn , , , , , , ,18 Part Number: Includes eries (90.10), Model and troke ength. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. FORE (dan) 146,80 137,90 129,00 120,10 111,20 Based on charge of 150 bar 106,32 kn , TRAVE (%) TO TRAVE (%) MAXIMUM REOMMENDED TRAVE 90% harging Pressure: bar. When not specified, default is 150 bar. Operating ystem: = elf-contained, F = Open Flow Fitting. When not specified, default is. 23

Mount Options.045 Mount Option.090 / U.0175 Mount Option.

x ø6,6 30 troke 9 21,5 24 troke 9 32 A troke 9 38 21,5 plit wire ring included

0175 A 21,5 17 plit wire ring included Narrow Flange Narrow Flange Narrow Flange

ø150 ø195 250-RF 00300 00500 00750 1600 01500 03000 05000 07500 10000 A 60 68 86

24 Mount Options.045 Mount Option.090 / U.0175 Mount Option.180 Mount Option NF NF 2 x ø6,6 VFA 44 2 x ø6,6 90-VFA VFA VFA 2 x ø6,6 30 troke 9 21,5 24 troke 9 32 A troke ,5 plit wire ring included plit wire ring included Model.090 U.0175 A 21,5 17 plit wire ring included Narrow Flange Narrow Flange Narrow Flange Mount Options B øa øb BOT IRE G E 4 x F H troke H an Diameter ø32 ø38 ø44,5 ø50 ø63 ø75 ø95 ø120 ø150 ø RF A B , ,4 E 35,4 39, , , , F M8 M8 M10 M10 M12 M12 M16 M16 plit Wire Ring Included G H EURE MOUNT ONTO TOP GROOVE WITH UPPIED RING AND REW 24

Mount Options B25 4 x F 90.25. / 90.325.

162 210 E 35 40 50 56,5 64 73,5 92 109,5 138 170 F M8 M8 M10 M10 M12 M12 M16 M16 G 9 9 13 13 16 16 18 21 27 27 plit Wire Ring included H 17 17 23 24 27 29 33 36 41

4 x F an Diameter ø32 ø38 ø44,5 ø50 ø63 ø75 ø95 ø120 ø150 ø195 0400* 00300* 00500* 00750 1600 01500 03000 05000 07500 10000 A 50 55 70 75 100 100 120 140 190 210 E

25 Mount Options B25 4 x F / G E A troke H an Diameter ø32 ø38 ø44,5 ø50 ø63 ø75 ø95 ø120 ø150 ø A E , , , F M8 M8 M10 M10 M12 M12 M16 M16 G plit Wire Ring included H EURE MOUNT ONTO TOP GROOVE WITH UPPIED RING AND REW B12 / B312 / B212 A E G / / *Mounts are angled for access to the port. 4 x F an Diameter ø32 ø38 ø44,5 ø50 ø63 ø75 ø95 ø120 ø150 ø * 00300* 00500* A E ,5 73,5 73, , F M8 M8 M10 M10 M12 M12 M16 M16 G B319V V. 2 x F H UPPIED A E an Diameter ø32 ø38 ø44,5 ø50 ø63 ø75 ø95 ø120 ø A H G B K J B E F M8 x 50 M8 x 50 M8 x 50 M10 x 60 M10 x 70 M12 x 80 M12 x 100 M12 x 100 G 20,9 23,9 27, , , M12 x 120 H K J IDE MOUNT INTO DEIRED OATION AND EURE UING THE TWO H PROVIDED 25

Plated ylinder with econdary Wiper For extreme conditions, DADO offers gas springs with both a special plated finish and a secondary wiper installed.

For high temperature applications, contact DADO.

the DADO part number troke 4 4 Models: 90.10.00500 U.0400 - U.2600 Plated ylinders with econdary Wipers troke 2 Models: U.4600 - U.9600 90.10.00750-90.10.10000 NOTE: To calculate usable stroke length, subtract the value provided in the appropriate drawing.

26 Plated ylinder with econdary Wiper For extreme conditions, DADO offers gas springs with both a special plated finish and a secondary wiper installed. ee below for details on the wiper caps and ordering information. For more information on a particular DADO gas spring series, refer to the relevant product catalog. For high temperature applications, contact DADO. Advantages: Plated rod and can for extreme condition performance econdary wiper for protection against external contamination Extra corrosion resistance in harsh environments Easy to order: Add Q to the DADO part number troke 4 4 Models: U U.2600 Plated ylinders with econdary Wipers troke 2 Models: U U NOTE: To calculate usable stroke length, subtract the value provided in the appropriate drawing. For dimensions refer to the individual gas spring model page. 5 eries U eries (U U.9600) eries ( ) Plated ylinder + econdary Wiper U.Q U.Q U.Q U.Q U.Q U.Q U.Q U.Q U.Q Q Q Q Q Q Q Q x M10 H eries Plated Rod and an with econdary Wiper Model troke ength: U eries = 16, 25, 38, 50, 80, 100, eries = 25, 50, 80, 125, 200 U. Q TO. 150 harging Pressure: bar. When not specified, default is 150 bar. Mount Option: TO = Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. Refer to pages for mount options. 26

inked ystem omponents onvertible ontrol Panel BV-4G Bleed Valve 4 x G 1/8 Port 127 2 x M10 H Default Port Mounting Options 71 The DADO onvertible ontrol Panel is used to fill, drain and monitor the

The panel consists of four G 1/8 BPP ports, a high pressure 63 diameter gauge, a quick disconnect fill valve, a bleed valve and a rupture disk to prevent overpressurization.

6 DPG-3RB PI/Bar Gauge 76 34,4 Hose hown with optional bottom guard. oon ontrol Panel Gauge tyle PI/Bar Gauge (DPG-3RB) = P, Bar/MPa Gauge (DPG-3RM) = A, when not specified, default is P.

27 inked ystem omponents onvertible ontrol Panel BV-4G Bleed Valve 4 x G 1/8 Port x M10 H Default Port Mounting Options 71 The DADO onvertible ontrol Panel is used to fill, drain and monitor the pressure of linked DADO nitrogen gas springs from outside the die. The panel consists of four G 1/8 BPP ports, a high pressure 63 diameter gauge, a quick disconnect fill valve, a bleed valve and a rupture disk to prevent overpressurization. For maximum versatility, the panel is available with a variety of fitting connections. 41,3 10,9 RD-400G Rupture Disk (BP = 400 bar / 5800 psi) Filler Valve 47.6 DPG-3RB PI/Bar Gauge 76 34,4 Hose hown with optional bottom guard. oon ontrol Panel Gauge tyle PI/Bar Gauge (DPG-3RB) = P, Bar/MPa Gauge (DPG-3RM) = A, when not specified, default is P. Guard Top Guard = 1, Top and Bottom Guards = 2 When not specified, default is 1. 63, P 1 N 31,8 2 x M8 H 15,9 19,1 Fitting onnection N = No Fitting upplied, = ORF Fitting, = MINIink Fitting When not specified, default is N. MINIFEX (Y-700) Hose + Offers the smallest possible bend radius available for flexible hose + ompatible with Mini style fittings annot be linked with a surge tank DADOFEX (Y-500) Hose + Higher working pressure without sacrificing bend radius or flow rate + ompatible with ORF style fittings + an be linked with a surge tank OD ID Working Pressure Burst Pressure Bend Radius rimp Die Mini-rimp bar 1890 bar 6.4 (Y-700) No Ring Required P03 Gray Die bar 1380 bar 38 (Y-500) 82-R01 Ring Hose Assembly A DADO hose assembly consists of a length of hose with a hose adapter on each end. DADO offers a pneumatically operated crimping unit and crimp dies used to make your own hose assemblies; contact DADO for more information. Hose Assembly I Hose Type (700 or 500) Hose Adapters ealing Type Example ORF 943 Mini 943 type used with and type is used with Orientation Hose adapter orientation: I, or ength of Hose Assembly () in Distance between sealing faces I Orientation 27

omponents: MINIink Fittings MINIFEX Hose ystem with 90.

= tainless teel Option Available 19,1 Minimum recoended

MINIink Fittings 90.700.943.943..I () Hose Assembly 90.601.

038 (-38) Micro Port Adapter Extension 14,5 90.607.

9/16-18 ORF 24,1 14,7 14,7 M8x1 TYP 29,3 14,7 M8x1 TYP

401 (-401) Union Tee A 90.606.303 (-303) Union 29,3 11 90.

28 omponents: MINIink Fittings MINIFEX Hose ystem with (Y-700) Hose 4,9 4,9 M8x1. = tainless teel Option Available 19,1 Minimum recoended distance between sealing faces () = 75 8 ADD TO HOE MINIink Fittings I () Hose Assembly (-943) Permanent Hose Adapter Micro eries ( ) and small Ultra Force eries (U.0175) Port Adapters M8x1 M8x M8x1 14,7 13,4 14,7 29,3 14, (-122) Micro ervice Fitting 14, (-38) Micro Port Adapter Extension 14, (-120) traight Port Adapter M8x1.. TYP (-220) 90 Port Adapter (-429) Branch Tee Port Adapter 28 14,7 11,1 14,5 9/16-18 ORF 24,1 14,7 14,7 M8x1 TYP 29,3 14,7 M8x1 TYP 14, (-428) Run Tee Port Adapter M8x1 TYP /16-20 AE (-35) Port Adapter Extension G 1/8 BPP (-116) Reducer 9/ (-201) Elbow G 1/8 Port Adapters (-401) Union Tee A (-303) Union 29, (-55) Reducer 7/ , (-65) Reducer G 1/8 A 20 G 1/8 BPP 19 G 1/8 BPP G 1/8 BPP 13 G 1/8 BPP 17, (-115) Reducer G 1/8 M8x1 M8x (-110) Port Plug (-109) Fitting Plug M8x traight A Branch Tee A

omponents: ORF Hose Adapters rimped Hose Adapters

700 (Y-700) H Value = 75 9/16-18 TYP 15,5 25,5 ADD

(-943) traight wivel 13,4 46,5 36,8 33,1 90.504.

959 (-959) 90 wivel ADD TO HOE Minimum recoended

= tainless teel Option Available rimped Hose

9/16-18 TYP 49,8 63,2 55,3 10,4 45,7 90.504.

TYP 24,1 9/16-18 ORF TYP 42 DADO s O-Ring Face eal

G 1/8 BPP TYP 90.505.115 (-115) traight. 90.505.116 (-116) 9/16-18 90.

29 omponents: ORF Hose Adapters rimped Hose Adapters for (Y-700) H Value = 75 9/16-18 TYP 15,5 25,5 ADD TO HOE (-943) traight wivel 13,4 46,5 36,8 33, (-954) 45 wivel ADD TO HOE , (-959) 90 wivel ADD TO HOE Minimum recoended hose length H. = tainless teel Option Available rimped Hose Adapters for (Y-500) H Value = 80 66,3 20,8 60,3 9/16-18 TYP 49,8 63,2 55,3 10,4 45, (-859) ADD TO 24,1 HOE 37, (-843) ompact wivel ADD TO HOE (-851) Retractable wivel 40.5 ADD TO HOE (-854) 45 Female Face eal (-858) 34,5 ADD TO HOE (-859) hort Neck (-858) ong Neck Port Adapters 21,3 9/16-18 ORF TYP 24,1 9/16-18 ORF TYP 42 DADO s O-Ring Face eal (ORF) Fittings have elastomeric seals at every joint. G 1/8 BPP TYP (-115) traight (-116) 9/ (-117) Extended traight. = tainless teel Option Available 48,5 9/16-18 ORF TYP 19 HEX 19,4 G 1/4 BPP 19 HEX 16 ø16,5 26,9 G 1/4 BPP 9/16-18 ORF (-121) wivel traight (-122) traight (-123) wivel traight (G-109) Flush Plug 29

30 omponents: ORF Fittings 21,5 11, ,5 A 21,5 A (-438) Run Tee (-330) 45 Elbow (-230) (-439) Branch Tee 43 A 21,5 A Fittings 21,6 TYP 43,2 TYP 27, (-112) Tube End ap (-303) Union (-201) Elbow (-401) Tee (-501) ross tandard wivel Nut Fittings 9/16-18 TYP 21,6 43,2 48,8 27,2 48,5 TYP TYP (-221) 90 Elbow Port Adapter hown (-433) Branch Tee (-432) Run Tee 30

Gas pring Technical Data AUTION DO NOT attempt maintenance on spring until internal pressure is exhausted. Operating pecifications harging Medium: Nitrogen Gas.045.

6 m/sec Installation Requirements Avoid udden Release Jaed parts are very dangerous. If parts are jaing, determine the root cause and repair it before production continues.

3 Provide troke Reserve DADO U eries gas springs will permit travel of the full nominal stroke; however, at least a 10% stroke reserve is recoended to achieve optimal performance

Therefore, avoid side loading when possible (F.5). >*0.9 F.

11 Rod End Thread The end of the piston rod has a construction thread intended for assembly and disassembly purposes only, and should never be used to mount or secure the gas

Protect gas springs by providing adequate drainage in gas spring pockets (F.7). Discharging elf-ontained Gas pring Use a Valve Bleed Tool (90.360.4) to discharge a gas spring.

9). For information on completely exhausting the gas spring refer to the Maintenance Instructions.

Never compress the gas spring in a vice or clamp outside of the die or application as damage to the gas spring can result (F.10).

1, 90.320.2 or 90.320.10) into the rod end and depress the valve stem with the Valve Bleed Tool (90.360.4) or Port ervicing Tool (90.320.8).

31 Gas pring Technical Data AUTION DO NOT attempt maintenance on spring until internal pressure is exhausted. Operating pecifications harging Medium: Nitrogen Gas harging Pressure: bar U.0175 U.0400 harging Pressure: bar U.0600 U.9600 / harging Pressure: bar Operating Temperature: 4 71 Maximum peed: 1.6 m/sec Installation Requirements Avoid udden Release Jaed parts are very dangerous. If parts are jaing, determine the root cause and repair it before production continues. udden release may cause gas to exhaust. lightly preloading the gas spring (F.1) prevents spring damage and sudden release (F.2). F.1 90% *0.9 F.3 Provide troke Reserve DADO U eries gas springs will permit travel of the full nominal stroke; however, at least a 10% stroke reserve is recoended to achieve optimal performance and safety (F.3 and F.4). Avoid ide oading A misaligned press or die can cause side loading that increases wear on the bearing, seal, and piston rod (F.6). Therefore, avoid side loading when possible (F.5). >*0.9 F.4 F.2 100% F.5 Drain Hole F.7 F.9 F.11 Rod End Thread The end of the piston rod has a construction thread intended for assembly and disassembly purposes only, and should never be used to mount or secure the gas spring (F.6). Die vibration and/or misalignment will damage the spring. Protect From Fluids Direct contact with certain die lubricants and cleaners should be avoided (F.8). Protect gas springs by providing adequate drainage in gas spring pockets (F.7). Discharging elf-ontained Gas pring Use a Valve Bleed Tool ( ) to discharge a gas spring. The DADO Pressure Analyzer ( ), permits discharging as well as charging and gauging of the pressure in the U U gas springs (except and the U.0175 (F.9). For information on completely exhausting the gas spring refer to the Maintenance Instructions. Recharging and Repair (elf-ontained Gas pring) ontact DADO for information on how to charge and U.0175 gas springs. Hold the spring vertically at all times during filling. Never compress the gas spring in a vice or clamp outside of the die or application as damage to the gas spring can result (F.10). Never fill a gas spring unless the rod is in the fully extended position (F.12). Thread the T-handle ( , or ) into the rod end and depress the valve stem with the Valve Bleed Tool ( ) or Port ervicing Tool ( ). Pull the rod cartridge assembly up until it is seated firmly against the retaining ring (F.11). Remove the T-handle from the rod and charge the gas spring to the desired pressure. Refer to the table below for the appropriate Repair Kit to get complete step-bystep instructions on how to repair the gas spring. >1 F.6 F.8 F.10 F.12 Model U.0400 U.0600 U.0800 U.1000 U.1600 U.2600 Kit Number Model U.4600 U.6600 U Kit Number A Model Kit Number

32 Die torage: Nitrogen Gas pring 90.10D prings are designed specifically for die storage applications. The D models return at a moderated speed, unlike standard gas springs that return at the speed of the ram. After the initial hit, only a small portion of the D stroke is engaged during each press stroke resulting in reduced operating temperature, minimal wear, and longer spring life. econdary Exhaust Port M8 Model Model ±0,25 ±0,25 ±0, D D øa 90.10D D B R2,5 3 Model A B 24 25,5 27,5 E F H øe øf G 1/8 Port J 42,4 56,6 70,7 K M8 x 12 Deep M10 x 16 Deep M10 x 16 Deep 4 x K øh On-ontact Force Model No. bar dan 90.10D J 90.10D D TO Basic Model Part Number: Includes eries (90.10D), Model and troke ength D TO harging Pressure: bar. When not specified, default is 150 bar. Mount Option: TO=Basic Model. When not specified, default is TO. Mounts ordered with cylinder will be attached at the factory. Refer to pages for mount options. Operating ystem: = elf-contained, F= Open Flow. When not specified, default is, self-contained. 32

Die torage: TE Blocks A variety of methods are used to separate dies

If a typical storage block is inadvertently left in the tool while the

shattering. TE die storage blocks from DADO are a safer alternative.

$load capability Resist brittle fracture in compressive loading Are$ custom sizes Are easily machined by the factory or end-user TE Block

TE Die torage Blocks ompressive trength = 120 bar TE storage blocks are

H H ød W Round Bar Model Model ød H MAX RB 65 1000 RB 79 1000 RB 100

800 B 50 300 800 B 60 300 800 B 80 300 600 B 100 300 500 eries Model RB

33 Die torage: TE Blocks A variety of methods are used to separate dies during storage, including spacers made of wood, steel or urethane. If a typical storage block is inadvertently left in the tool while the press closes, it may cause damage to the die or pose a safety risk from shattering. TE die storage blocks from DADO are a safer alternative. TE die storage blocks: Exhibit high energy absorption Possess excellent load capability Resist brittle fracture in compressive loading Are impervious to many types of oil and grease Are available in standard and custom sizes Are easily machined by the factory or end-user TE Block After Deformation ontact DADO for custom configurations. TE Die torage Blocks ompressive trength = 120 bar TE storage blocks are a copolymer material made from a reactive casting process. H H ød W Round Bar Model Model ød H MAX RB RB RB RB RB haped Bar Model Model H W MAX MAX B B B B B eries Model RB (Round Bar) or B (haped Bar) TR. RB Dimensions ee charts above. ustom sizes are available. ontact DADO for more information. 33

34 Designed for use in dies as a replacement for coon pins, bushings and spools the Guide Retainer et (GR) eries features high quality guided components to ensure exceptionally long service life. DADO offers GR in four models, designated by Guide Rod diameter, to accoodate different load capacities: GR.25, GR.30, GR.36 and GR. 50 (refer to page 37 for attachment capability information). W2 Mount 18,54 GR.30 ø75 10 Guide Retainer ets W2 Mount GR.36 ø88 11,5 N3 Mount 57,06 ø75 ø60 28, ,27 25,98 21,32 N3 Mount 65,62 ø88 ø69 32,81 17,25 10,66 29,88 36 M8 H 4 x A M10 H x A HEX ø30 ø6 8 B 4 HEX ø36 ø8 8 B ,4 52, ø43 f 7 44 ø50 f 7 19 ø47 21 ø54 Guide Pin A Thread B Depth M M8 22 () = () + 50 (inch) = (inch) + 1,968 Guide Pin A Thread B Depth M M10 23 () = () + 65 (inch) = (inch) + 2,559 E 5/ ,87 E 3/8-16 0,91 34 Part Number: GR.30 or GR.36 Guide Rod Option GR.30. M W2 Guide Retainer Mount Option: W2 or N3 troke ength: 20,0 to 150,0 (0,75 to 6,00 ) in increments of 0,1 Refer to page 37 for complete ordering example.

35 GR.25 / GR.50 - Flange Mount GR.25 GR , ,15 A 15,88 FAT 52 B.. 57,15 A 10,0 58 B.. ø19,0 ø8 4 x M8 H 69,6 18,38 ø8 20,5 4 x M8 H 75 ø25 8 ø30 ø6 8 5 B B ø38 f 7 46, ø43 f 7 46,4 Guide Pin A Thread B Depth M M12 29 E 1/2-13 1,14 () = () + 50 (inch) = (inch) + 1,968 Guide Pin A Thread B Depth M M8 22 E 5/ ,87 () = () + 50 (inch) = (inch) + 1,968 Part Number: GR.25 or GR.30 Guide Rod Option GR.30. M FM Guide Retainer Mount Option: FM troke ength: 20,0 to 150,0 (0,75 to 6,00 ) in increments of 0,1 Refer to page 37 for complete ordering example. 35

36 GR.36 / GR.50 - Flange Mount GR.36 GR.50 4 x A 47, ,5 67 B.. 84,84 4 x A 60, B.. 69,85 ø10 4 x M10 H 88 23,69 ø12 4 x M12 H ,41 ø50 ø36 ø8 8 B ø10 8 B ,0 58,4 60,00 70,4 15 ø50 f 7 20 ø68 f 7 Guide Pin A Thread B Depth M M10 23 E 3/8-16 0,91 () = () + 65 (inch) = (inch) + 2,559 Guide Pin A Thread B Depth M M12 29 E 1/2-13 1,14 () = () + 80 (inch) = (inch) + 3, Part Number: GR.36 or GR.50 Guide Rod Option GR.36. M FM Guide Retainer Mount Option: FM troke ength: 20.0 to (0.75 to 6.00 ) in increments of 0.1 Refer to page 37 for complete ordering example.

37 GR Technical Data Maximum Attachment apacity Per Guide Retainer et onsider the dynamic load factors on the guide unit fasteners. The guidelines below show attachment limits per GR based on the press ram velocity. For increased capacity, install additional Guide Retainer ets. Guide Retainer Mount Option: FM / W2 N3 Model: GR.25 GR.30 GR.36 GR.50 GR.30 GR.36 Ram Velocity /s Metric Attachment Mass (kg) ,9 6, ,8 9, ,8 3,6 7,3 11 2,7 5,4 Force (kn) tatic oad Rating (Mechanical trength) GR troke ength Recoendations DADO offers the Guide Retainer ets in stroke lengths from 20,0 to 150,0 in increments of 0,1 ; DADO recoends ordering stroke lengths in 5,0 increments when possible. Refer to charts below for the appropriate stroke length ordering code based on these suggestions. For more information contact DADO. troke ength troke ength Order ode Order ode 20, , , , , , , , , , , , , , , , , , , , , , , , , , eries: Guide Retainer et Guide Rod Diameter: Ø25, Ø30, Ø36 or Ø50 Guide Rod Option: M = Metric or E = Imperial Guide Rod: GR. 36. M FM Replacement Part Ordering Information: GR.36.M.0250.RO Guide Retainer: GR.36 = Flange Mount, GR.36T = Toe lamp Mount Guide Retainer Mount Option: FM = Flange Model W2 = Wide Toe lamps (Qty. 2) or N3 = Narrow Toe lamps (Qty.3); GR.30 and GR.36 only troke ength: 20,0 to 150,0 (0,75 to 6,00 ); specified in 0.1 Increments Example: 25,0 = 0250 or 1,00 = 0254 ock Washer: Wide Toe lamp: Narrow Toe lamp: GR.30 UMR08 GR.36 UMR10 GR.WM8 GR.WM10 GR.NM8 GR.NM10 37

Delay Return ystem (DR) Details The Delay Return ystem (DR) is used when an application requires the nitrogen gas springs to delay in the compressed state in the die to prevent deformation while the

Features Patented Technology Modular accumulator system Reliable leak-free operation ontrolled travel on return stroke No filling or bleeding during installation 115 VA, 230 VA or 24 VD operation

38 Delay Return ystem (DR) Details The Delay Return ystem (DR) is used when an application requires the nitrogen gas springs to delay in the compressed state in the die to prevent deformation while the metal parts are shaped. Features Patented Technology Modular accumulator system Reliable leak-free operation ontrolled travel on return stroke No filling or bleeding during installation 115 VA, 230 VA or 24 VD operation Reliable nitrogen pressure control Quick connect hydraulic hose and fittings Numerous cylinder options Optional fan accessory for cooling Optional No pring-back accessory Accumulator is nitrogen gas-over-hydraulic and converts nitrogen pressure to oil pressure. Hydraulic ylinder is filled with hydraulic oil. When the rod is actuated by the press the oil flows to the accumulator. Hydraulic Hose and Fittings connect the hydraulic cylinder to the accumulator. ontrol Panel with Hose Assembly is connected to the accumulator allowing for filling, draining and monitoring of the nitrogen gas pressure in the system. 1 Down troke: Part Forming Tail Rod Accumulator is Visible P OI = Hydraulic Oil ylinder Rod is troked P N2 Hydraulic = Nitrogen Gas ylinder 125 bar MAX olenoid The accumulator is pressurized with nitrogen gas to energize the hydraulic oil to the pressure required for the forming application. The hydraulic cylinder and accumulator have equivalent pressure (P N2 = P OI ). During the downstroke of the die, the hydraulic cylinder delivers force like a typical nitrogen gas spring. The oil in the hydraulic cylinder is transferred through the accumulator s main check valve. 2 Bottom of troke: Part omplete Electric ignal 24 VD, 115 VA or 230 VA Tail Rod is Visible ylinder Rod is Retracted The solenoid valve is energized before the part is completely formed. The main check valve holds the pressurized oil in the accumulator. The hydraulic cylinder s rod will stay retracted as the press opens. A 1-4% spring-back may occur during the delayed action. An optional No pring-back accessory is available. 3 Return troke P N2 Tail Rod Retracts but is still Visible ylinder Rod Extends After the part is completed and the ram retracts, the solenoid valve is deactivated allowing the cylinder rod to extend at a controlled rate. During extension, the heat generated by the accumulator dissipates and the tail rod will retract into the indicator tube. An electrical fan or other options may be installed with the accumulator to facilitate cooling. 38 Note: ystems with higher tonnage, rapid production rates or long pad travel may require additional cooling components.

Delay Return ystem (DR) Details General Operating pecifications harging Medium: Nitrogen Gas Maximum harging Pressure: 125 bar Maximum Operating Temperature: 63 Maximum Velocity: 1 m/sec ystem Oil:

Hydraulic ylinders Accumulators Fill oupling 90 165,1 147,0 M10 H Port Detail (ize, Quantity and ocation) ØA 165,1 ØB artridge Assembly Port 4 x G1/8 N 2 Only Fill oupling Max 61 Tail Rod ight Tube

39 Delay Return ystem (DR) Details General Operating pecifications harging Medium: Nitrogen Gas Maximum harging Pressure: 125 bar Maximum Operating Temperature: 63 Maximum Velocity: 1 m/sec ystem Oil: IO viscosity of 32, index of 95 pecific operating conditions will be assigned per system. Hydraulic ylinders Accumulators Fill oupling ,1 147,0 M10 H Port Detail (ize, Quantity and ocation) ØA 165,1 ØB artridge Assembly Port 4 x G1/8 N 2 Only Fill oupling Max 61 Tail Rod ight Tube F6 = AE-6, F8 = AE-8, F10 = AE-10 P = Number of Ports = enter, = eft, R = Right Bleed Port Port Plug tandard TO Mount Pattern Refer to the UH eries atalog for cylinder and mount information. ylinder height may vary for larger port sizes. Model ØA ØB Tonnage Travel Production Rate Estimate On-ontact Force* kn (2 x ) ,70 UD.1000 UD.1600 UD.2600 UD.4600 UD (2 x ) + 52 (2 x ) + 59 (2 x ) + 72 (2 x ) ,72 19,88 35,34 55,22 *Maximum harging Pressure is 125 bar. Oil Gauge ustom ystem Requirements Each DR is designed based on customer requirements and is factory tested to ensure proper operation prior to shipment. To request a quote for a system, details about the tonnage, travel and production rate of the application are required. ontact DADO Engineering for a proposal. Estimate tonnage required for the holding force on-contact. If particular cylinder sizes are known, provide the quantity, model, stroke and pressure. Advise of any special requirements. Actual pad travel is required. The travel is used to determine the volume of the system, system pressure and maximum operating speed of the system. Provide information about potential spring-back issues. PR = Production Rate in Parts per Minute The DR can be designed to meet a wide range of production rates. Additional cooling features may be required depending on the system requirements. Use the formulas to the right to determine the maximum acceptable rate of production. Accumulator Example: A F6.P4.115 Vol. Port Q& Volt Model Vol. liter olenoid Valve Options (available with all models) Quantity Port and ocation Voltage A , F6 P4 24 VD A , F8 P2 115 VA A , F10 P1 230 VA Metric PR = 400,000 x A ( x F) F = On-ontact Force (kn) = Pad troke () A = Number of Accumulators Required Formula based on system with active cooling option. Port ocation (see detail above) 39

43850 Plymouth Oaks Blvd. Plymouth, Michigan 48170 UA The global leader in nitrogen gas spring technology Printed in UA DADO, Inc.

40 43850 Plymouth Oaks Blvd. Plymouth, Michigan UA The global leader in nitrogen gas spring technology Printed in UA DADO, Inc All Rights Reserved Product changes may occur during the life of this catalog without prior notice, but products supplied will remain functionally interchangeable.

Catalog No. C09101B. SC Series. Super Compact Nitrogen Gas Springs PED 2014/68/EU COMPLIANT

Catalog No. C09101B. SC Series. Super Compact Nitrogen Gas Springs PED 2014/68/EU COMPLIANT atalog No. 09101B uper ompact Nitrogen Gas prings eries PED 2014/68/EU OMPIANT uper ompact Nitrogen Gas prings Introduction DADO produces top quality products at competitive prices and provides a superior