CABIN & COCKPIT ENTRY HARDWARE

Transcription

1 47 IN & OKPIT NTRY HRWR TRNSOM LTH - SPRIN OLT 316 stainless steel housing with nylon slide Simple spring loaded slide latch well-suited for fibre glass doors eatures an adjustable slide bolt vailable as both single and double sided Screws not included 90 0 Rim mount Rim mount Part No. Model Latch M Single Side 91(3 5/8 ) 56 (2 1/4 ) 9 (3/8 ) X X M ouble Side 91(3 5/8 ) 56 (2 1/4 ) 9 (3/8 ) X X Strikers M X X X 22 (7/8 ) 56 (2 1/4 ) M X X X 22 (7/8 ) 70 (2 3/4 ) TRNSOM LTH - SPRIN OLT 316 stainless steel with nylon slide Spring bolt can be reversed to accommodate for both left and right swing lush mount striker plate included Mounting hardware not included Part No mm mm mm mm M (2 3/4 ) 27 (1 1/16 ) 20 (3/4 ) 30 (1 3/16 ) TRNSOM LTH - SPRIN OLT 316 stainless steel Two striker options available Mounting hardware not included Heavy duty construction 22 (.87) 38.1 (1.5) 32 (1.26) 2X Ø5.9 (0.23) 2X Ø8 (.31) 2 (.8) 25 (.98) 60 (2.36) 48 (1.89) 2X Ø5.9 (.23) 13 (.51) 2X Ø8 (0.31) (5.41) 32 (1.26) (1.07) 33 (1.3) 2X Ø (0.25 ) ± 0.1 (1.457 ± 0.004) Part No M M Striker lat Standard

2 46 IN M5 Transom & oor OKPIT Latches Stainless entry Steel harware Transom oor Latch-Magnetic 316 stainless steel esigned for 12mm (1/2 ) doors eatures an adjustable slide bolt omes with striker (magnetic) Screws not included Locking and Non-locking versions Part No mm mm mm mm mm Non-Locking M (3 1/2 ) 55 (2 3/16 ) 9.3 (3/8 ) 21 (7/8 ) 70 (2 3/4 ) Locking M (3 1/2 ) 55 (2 3/16 ) 9.3 (3/8 ) 21 (7/8 ) 70 (2 3/4 ) ouble Knob Transom oor Latch- Magnetic 316 stainless steel esigned for 12mm (1/2 ) doors Rim mount vailable both with and without locking omes with striker magnetic M Screws not included Part No Model mm mm mm mm mm M W/ Lock 91 (3 9/16 ) 56 (2 7/32 ) 9 (11/32 ) 21 (7/8 ) 70 (2 3/4 ) Oval Single Side Transom oor Latch-Magnetic 316 stainless steel Surface mount, no need for cut out eatures an adjustable slide bolt Screws not included lush Striker M Part No Striker mm mm mm mm mm M lush 91 (3 9/16 ) 56 (2 7/32 ) 9 (11/32 ) 15 (5/8 ) 70 (2 3/4 ) M Rim 91 (3 9/16 ) 56 (2 7/32 ) 9 (11/32 ) 21 (7/8 ) 70 (2 3/4 )

3 47 IN & OKPIT entry harware TRNSOM LTH - SPrin OLT 316 stainless steel housing with nylon slide Simple spring loaded slide latch well-suited for fibre glass doors eatures an adjustable slide bolt vailable as both single and double sided Screws not included 90 0 Rim mount Rim mount Part No. Model Latch M ouble Side 91(3 5/8 ) 56 (2 1/4 ) 9 (3/8 ) X X M ouble Side 91(3 5/8 ) 56 (2 1/4 ) 9 (3/8 ) X X M Single Side 91(3 5/8 ) 56 (2 1/4 ) 9 (3/8 ) X X Strikers M X X X 22 (7/8 ) 56 (2 1/4 ) M X X X 22 (7/8 ) 70 (2 3/4 ) TRNSOM LTH - SPrin OLT 316 stainless steel with nylon slide Spring bolt can be reversed to accommodate for both left and right swing lush mount striker plate included Mounting hardware not included Part No mm mm mm mm M (2 3/4 ) 27 (1 1/16 ) 20 (3/4 ) 30 (1 3/16 ) TRNSOM LTH - SPrin OLT 316 stainless steel Two striker options available Mounting hardware not included Heavy duty construction 22 (.87) 38.1 (1.5) 32 (1.26) 2X Ø5.9 (0.23) 2X Ø8 (.31) 2 (.8) 25 (.98) 60 (2.36) 48 (1.89) 2X Ø5.9 (.23) 13 (.51) 2X Ø8 (0.31) (5.41) 32 (1.26) (1.07) 33 (1.3) 2X Ø (0.25 ) ± 0.1 (1.457 ± 0.004) Part No M M Striker lat Standard

4 4 IN M Mcoy Swing & OKPIT oor Latch entry harware Nova Portofino The Mcoy is a mortise lock designed for applications where elegant styling and a durable lockset are desired. It offers an exceptionally tough mechanism and a variety of sophisticated design features: 100% Marine-grade materials to prevent corrosion ouble springs keep handle from sagging mergency lock override vailable Options: inish: hrome, iamond rass, hrome with iamond rass accent, and Satin. Please contact Southco Marine for other finish options. unction: vailable with or without privacy lock. ppearance: ombine handles, escutcheon plates, and accent plates to customise the latch for your application. or unique styling combine the Mcoy with a wide range of stylish Olivari handles. See page 9 imensions Part Number Selection (or Strikers please see page 23) inish 10 hrome 12 hrome + Satin ccent 14 hrome + rass ccent 20 Satin 21 Satin + hrome ccent 40 iamond rass M - - L T - HH - Nominal ecimal 3 29/ / / / / Latch Mechanism 01 Standard Springbolt 08 ouble Springbolt irectional 2 Right Out 3 Right In 4 Left Out 5 Left In 6 Right Out - Left In 7 Left Out - Right In Left Hand in Left Hand out Right Hand in Right Hand out HH Handle 01 Nova 02 Portofino T oor Thickness mm (7/8-1 3/16 ) mm (1 1/8-1 1/2 ) L Locking Option 0 Non Locking = 6 or 7 2 Privacy = 2 to 5

5 5 IN & OKPIT entry M Mcoy harware Swing oor Latch Ø 2 Places L I Ø K 2 Places 30º Rad Rad H I J K Nominal ecimal 5/ / / / / / / / / / / J H Installation

6 6 IN M Mcoy Star & OKPIT entry harware Mcoy Star Round Standard Springbolt and Portofino handle shown Mcoy Star Square ouble Springbolt and Nordic handle shown (or more information about the ouble springbolt contact Southco) The Mcoy Star line of key lockable entry and cabin door latches is designed for applications where a robust and secure design must be achieved with style. With multiple format, installation, locking, and finish options, a variety of Mcoy entry door locks can be combined to satisfy the specific mechanical and security needs of multiple door applications throughout an entire boat, while achieving a consistent look and style. The choice of round and square escutcheon plates enables you to choose the solid performance and secure operation of the Mcoy Star-Lock in styles to complement your other hardware. Provide high-end security with the Star-Lock system s three-axis six-pin tumbler design nable a one-key solution for multiple cabin and entry doors all using the same secure Star-Lock system Prevent door lift-off with the Star-Lock hooked locking mechanism that features an active locking deadbolt facing up Promote an ergonomic non-slip grip with the molded head of the Star key Offer the option of an interior privacy knob with exterior override 48.5 for non-locking applications T (1.91) 45 (1.77) nhance your decor options with a wide range of high-quality designer handles, escutcheon 10.5 plates, and accent plates in a variety of finish options (.41) 3.4 (.13) including diamond brass, polished chrome and satin (1.91) 71 (1.71) efend against corrosive environment (2.8) with all marine-grade construction 7.5 (.3) Satisfy door thicknesses 16.3 (.64) ranging from 22 mm to 45 mm Reduce closing force and resist vibration with double Ø34 (1.3) 2.2 (.09) 18 (.71) springbolt option Mcoy Star Round Installation Inside escutcheon Latch module Washer ccent Outside escutcheon rive bar 98 (3.85) Ø55 (2.17) 18.3 (.72) Ø26 (1.02) Interior privacy knob assembly Lock module Mcoy Star Square Installation Washer Keyway assembly Inside escutcheon Latch module Handle Set screw #10 Outside escutcheon rive bar Interior privacy knob assembly racket Handle Lock module

7 7 IN & OKPIT entry M harware Mcoy Star Round Lock T 48.5 (1.91) 45 (1.77) 98 (3.85) Striker 10.5 (.41) 48.5 (1.91) 7.5 (.3) 16.3 (.64) 71 (2.8) 3.4 (.13) 43.5 (1.71) Ø55 (2.17) 18.3 (.72) Ø26 (1.02) Installation ustbin for latch Striker oor frame Ø34 (1.3) Part Number Selection 62.5 (2.46) Ø23 (.91) 18 (.71) 2 (.08) (6.55) 71 (2.8) 44.5 (1.75) 138 (5.43) 3* 2.2 (.09) Inside escutcheon inish Latch module 10 hrome ccent 14 hrome with diamond brass accent Outside escutcheon Washer 20 Satin (matte chrome) rive bar 40 iamond brass Handle Interior privacy knob assembly Keyway assembly Set Tscrew #10 Lock module Latch Mechanism 02 Mcoy Star Standard Springbolt 07 Mcoy Star ouble Springbolt irectional 2 Right Out 3 Right In 4 Left Out 5 Left In Left Hand in Left Hand out M - - L - HH - 0 Right Hand in Right Hand out L Locking Option 3 Star key lock (2 Star Keys included) 5 Privacy knob with emergency egress 16.3 (.64) 13 (.51) 58.7 (2.31) 43.5 (1.71) 16 (0.63) HH Handle 01 Nova 02 Portofino T oor Thickness mm (7/8-1 3/16 ) mm (1 1/8-1 1/2 ) mm (1 7/16-1 3/4 ) 45 (1.77) 27.7 (1.09) 2X Ø6.5 (.26) Ø16 (.63) Ø23 (.91) Striker tongue Part Number Selection XX Z ustbin Option 0 No ustbin 1 With ustbin M XX - Y Z - 10 XX Position 05 5mm (3/16 ) 07 7mm (1/4 ) 09 9mm (3/8 ) 13 13mm (1/2 ) 16 16mm (5/8 ) 21 21mm (7/8 ) See note 19.5 (.8) 2.75 (.11) 2 (.08) if not using dustbin - Y Swing 1 Right in/ Left out 2 Left in/ Right out istance (XX) (.17) 18.3 (.7) 13.4 (.53) R6.2 (.24) 13 (.51) 14.5 (.57) 34.4 (1.35) entre line of striker tongue ustbin for locks Note: istance XX is measured from the edge of the frame to the spring bolt 30.9 (1.22) 47 (1.85) 73.8 (2.91) 12.4 (.5) (5.29)

8 8 IN M Mcoy Star & Square OKPIT entry harware 25 (1) 10.5 (.41) *See part number table 48.5 (1.91) 7.5 (.3) 16.2 (.64) 71 (2.8) 19.6 (.8) T 45.1 (1.77) 143 (5.6) 3.6 (.14) 3.4 (.13) 18.3 (.72) 43.5 (1.71) 45 (1.77) 40 (1.6) 115 (4.53) 27.5 (1.08) Part Number Selection inish 10 hrome 40 iamond brass M - - L T - HH - 1 Latch Mechanism 02 Mcoy Star Standard Springbolt 07 Mcoy Star ouble Springbolt irectional 2 Right Out 3 Right In 4 Left Out 5 Left In HH Handle 42 Nordic T oor Thickness mm (7/8-1 3/16 ) mm (1 1/8-1 1/2 ) mm (1 7/16-1 3/4 ) Left Hand in Left Hand out Right Hand in Right Hand out L Locking Option 0 Non Locking 3 Star key lock (2 Star Keys included) 5 Privacy knob with emergency egress 62.5 (2.46) 2 (.08) 3* 16.3 (.64) 13 (.51) 45 (1.77) 44 (1.73) 44.5 (1.75) 58.7 (2.31) 44 (1.73) Ø8 3X (.3) Ø10 (.4) (6.55) (2.8) 138 (5.43) (1.71) (1.12) Ø16.5 (.65) (2.34) Ø20 (.8)

9 9 IN & OKPIT entry harware M Mcoy & Olivari Let Southco Marine provide the perfect accent to your interior design. ward winning Olivari handles can be teamed with the world class Mcoy lockset to provide the look and feel that set your design apart. ontact Southco Marine to discover the perfect finishing touch. 167 milia inish 10 hrome 12 hrome + Satin ccent 14 hrome + rass ccent 20 Satin 21 Satin + hrome ccent 40 iamond rass 174 ster M - - L T - HHH - Type 01 Round 02 Star Locking 07 ouble Springbolt, Star Locking 08 ouble Springbolt irectional 2 Right Out 3 Right In 4 Left Out 5 Left In 6 Right Out - Left In 7 Left Out - Right In Left Hand in Right Hand in hhh Handle Refer to Olivari website and literature for 3-digit handle code for example ster = 174 Sector = 186 T oor Thickness mm (7/8-1 3/16 ) mm (1 1/8-1 1/2 ) mm (1 7/16-1 3/4 ) L Locking Option 0 Non Locking (=01 or 08) 2 Privacy (=01 or 08) 3 Star Locking (=02 or 07) 134 Torino 186 Sector 108 Uovo Left Hand out Right Hand out nsure that your desired finish is available for the selected handle style. Please note some Olivari handle designs may not be suitable for use with the privacy option. ontact Southco Marine for further information.

10 10 IN M Magnetic & oor OKPIT Latch Stainless entry Steel harware MNTI IN oor Latch - hanl STYL 316 stainless steel Suitable for door thickness between 19 35mm (3/4 1-3/8 ) eatures a privacy knob on the inside and an egress opening on the outside asy installation Quiet operation due to magnetic pawl omplete latch set including handles and striker vailable in bright stainless steel Part No mm mm mm mm oor Size inish M (2 7/16 ) 75 (3 ) 92 (3 5/8 ) 70 (2 3/4 ) 19 (3/4 ) -25 (1 ) Polished M (2 7/16 ) 75 (3 ) 92 (3 5/8 ) 70 (2 3/4 ) 28 (1 1/8 ) -35 (1 3/8 ) Polished MNTI IN oor Latch - roun KNO STYL 316 stainless steel Suitable for door thickness between 19-35mm (3/4-1-3/8 ) eatures a privacy knob on the inside and an egress opening on the outside asy installation Quiet operation due to magnetic pawl omplete latch set including handles and striker vailable in bright stainless steel Part No mm mm mm mm oor Size inish M (2 7/16 ) 75 (3 ) 92 (3 5/8 ) 70 (2 3/4 ) 19 (3/4 ) - 25 (1 ) Polished M (2 7/16 ) 75 (3 ) 92 (3 5/8 ) 70 (2 3/4 ) 28 (1 1/8 ) - 35 (1 3/8 ) Polished

11 11 IN & OKPIT M Magnetic entry oor Latch harware Stainless Steel MNTI PriVY oor Latch - OVL KNO STYL 316 stainless steel Suitable for door thickness between 19 35mm (3/4 1-3/8 ) eatures a privacy knob on the inside and an egress opening on the outside asy installation Quiet operation due to magnetic pawl omplete latch set including handles and striker vailable in bright stainless steel Part No mm mm mm mm oor Size inish M (2-7/16 ) 75(3 ) 92(3-5/8 ) 70(2-3/4 ) 3/4-1 Polished M (2-7/16 ) 75(3 ) 92(3-5/8 ) 70(2-3/4 ) 1-1/8-1-3/8 Polished MNTI OOR LOK - Lush 316 stainless steel its 16-18mm (5/8-3/4 ) thickness doors eatures inside privacy knob and outside key lock Suitable for both swing and curved doors M and M both without handle filler Part No Model mm mm - Min. mm mm mm M Left 58 (2 1/4 ) 100 (4 ) 16 (5/8 ) M Right 58 (2 1/4 ) 100 (4 ) 16 (5/8 ) M Left 58 (2 1/4 ) 100 (4 ) 16 (5/8 ) M Right 58 (2 1/4 ) 100 (4 ) 16 (5/8 ) M Striker (1 ) 100 (4 ) 26 (1 )

12 16 IN M ompact & abin OKPIT oor Lock entry HRWR OOR THIKNSS RN: 19-32mm (3/ ) The ompact features a simple yet graceful design that works with all swing-door variations. The ompact is designed for abin, Stateroom, and Head-door applications. ll marine-grade materials, including stainless steel and brass for superior corrosion resistance mergency lock override asy installation with rounded forends One part number for all swing-door variations vailable Options: inish: Options include: hrome with/without rass accent, Satin scutcheon Plates: Long Island Operation: Universal design fits all door swings ccessories oorkeeper: Used to hold door open or strikers see page 23 = Long Island Nominal 3 9/16 5/8 3 5/16 1 1/4 1 3/8 3 13/16 ecimal Ø Ø H I Ø H I ompact Long Island Nominal ecimal 5/8.64 1/ / / / / / / / How to override a locked ompact door lock from the outside or installation details see opposite page. OMPT PRT NUMRS scutcheon Plate inish Privacy Out In Left Right Long Island, chrome X X X X X M Long Island,chrome, brass accent X X X X X M Long Island, satin X X X X X M Long Island, cast chrome, X X X X X M

13 17 IN & OKPIT entry HRWR oorkeeper The oorkeeper stops and holds doors open. They are designed to work with the Mcoy, Offshore and ompact latches (see pages and opposite). ll Marine-grade S materials amping/non-vibration feature keeps doors from rattling when held open asy to install vailable Options: olor: vailable in black or white. Offshore ompact Nominal ecimal 13/ / / / Operation losing ngaged Releasing OORKPR PRT NUMRS Offshore, lack M Offshore, White M ompact, lack M ompact, White M M ompact Installation ! djust set screw to secure handle

14 23 IN & OKPIT NTRY Strikers HRWR & ccessories Striker M/S Strikers are suitable for the Mcoy, ompact, Offshore and Omni swing door latches. They are available in seven different sizes and suitable for many door and frame configurations and door thicknesses The striker tongue holds the spring bolt and prevents it from being worn out due to vibrations from the boat You can choose to order the strikers with or without dustbin. The dustbin hides the sawdust in the cut out hole and provides an elegant finish to the frame edge The strikers are available both in brass and nickel plated brass finishes XX + 6mm rame 16 (5/8 ) X 13.5 (7/32 ) Min. depth oor rame Measured depth XX To find the right striker for your application, measure the distance from the door face to the edge of the springbolt of the latch. Without ustbin 53 (2 3/32") With ustbin XX XX / / /2 Part Number Selection inish 10 Nickel 40 rass Z ustbin Option 1 No ustbin 2 With ustbin M Z XX - XX Position 03 3mm (7/64 ) 05 5mm (3/16 ) 07 7mm (1/4 ) 09 9mm (3/8 ) 13 13mm (1/2 ) 16 16mm (5/8 ) 21 21mm (7/8 ) Whale Striker The Whale striker is suitable for the Offshore, Mcoy and ompact swing door latches. It allows for a very quick and easy installation The striker is available both in brass and stainless steel finishes and in seven different sizes to fit a wide = XX + 17mm variety of door and frame configurations Part Number Selection inish 10 Nickel 40 rass M XX /8 22 7/8 47 (1 27/32") XX XX Position 03 3mm (7/64 ) 05 5mm (3/16 ) 07 7mm (1/4 ) 09 9mm (3/8 ) 13 13mm (1/2 ) 16 16mm (5/8 ) 21 21mm (7/8 ) Submarine Striker The Submarine striker is suitable for the Mcoy, ompact and Offshore swing door latches The striker is available both in brass and nickel plated brass finishes. The two different sizes of the striker tongue accommodate different door thicknesses and door and frame configurations XX 25 (1 ) 52 (2 23/64") 10.5 (7/16 ) XX rass Nickel plated 4.8 3/16 M-9572 M /8 M-9598 M

15 12 IN M Offshore & Swing OKPIT oor Latch entry harware oor Thickness Range: Mortise Mount: 18-37mm (11/16-1-1/2 ) lush Mount: mm (1/2-7/8 ) The Offshore is available for both mortise- and flush-mount installations. It features a variety of options to customise the lock to your application requirements. Standard features include: ll marine-grade materials for corrosion resistance Offshore flush-mount is designed to fit thinner doors (from 12.7mm / 1/2 ) Interior Privacy Lock with exterior override 14mm (9/16 ) spring-bolt travel allows for large variations between door and frame or custom and matching key codes please contact Southco Marine vailable Options: inish: ive finish options to suit your styling needs: luminium, rass, lack, hrome and White. Keylock: Optional from the exterior. ccessories: oorkeeper: Used to hold door open, see page 17. M urved Oshore Swing oor Open Position 0 90 oor Thickness Range: mm (1/2-1 ) y adding optional spacers, the door thickness can be reduced to 8mm (5/16 ). The urved Offshore is designed for both sliding and swing doors, as well as double doors and curved doors. This unique locking system works in any angle between a sliding and swing door. It features: ll marine-grade materials for superior corrosion resistance Interior Privacy Lock with exterior override or custom and matching key codes please contact Southco Marine vailable Options: inish: hrome, luminium, iamond rass. Keylock: xterior oor Thickness: or doors thicker than 25.4mm please contact Southco Operation: Left- or Right-hand swing ccessories: Spacer: Spacer available to accept thinner door thickness. oorkeeper: Used to hold door in open position, see page 17. losed Position

16 13 IN & OKPIT entry M Offshore harware lush Version Nominal ecimal 4 37/ / / / / or strikers see page 23 L Locking Option 0 Privacy 1 Key Locking M L T inish 10 hrome 40 iamond brass 50 lack 60 luminium 70 White Left Hand in Left Hand out Right Hand in Right Hand out irectional 2 Right Out 3 Right In 4 Left Out 5 Left In T oor Thickness mm (1/2-5/8 ) mm (9/16-11/16 ) mm (11/16-3/4 ) mm (3/4-7/8 ) Ø Nominal ecimal 3 21/ / / / /

17 14 IN M Offshore & Mortise OKPIT Version entry harware hrome Mortise Mounted, Privacy Nominal ecimal 31/ / / / / / Part Number Selector L Locking Option 0 Privacy 1 Key Locking M L T inish 10 hrome 40 iamond brass 50 lack 60 luminium 70 White Left Hand in Left Hand out Right Hand in Right Hand out irectional 2 Right Out 3 Right In 4 Left Out 5 Left In T oor Thickness mm (11/16-7/8 ) mm (7/8-1 1/16 ) mm (1 1/6-1 1/4 ) mm (1 1/4-1 1/2 ) Ø Ø Ø H Ø I Installation Mortise Mount 1 2 Ø J depth = 3 (1/8 ) only on privacy knob side Ø K Ø L 3 Nominal ecimal 1/ / / / / / H 5/ I 1/ J 7/ K 1/ L 5/ or strikers see page 23

18 15 IN & OKPIT entry M Offshore harware urved Version Nominal ecimal urved Offshore 4 37/ / / / / Part Number Selector L Locking Option 0 Privacy 1 Key Locking M L T - inish 10 hrome 40 iamond brass 60 luminium Left Hand in Left Hand out Right Hand in Right Hand out irectional 6 Right Out / Left In 7 Left Out / Right In T oor Thickness or thinner doors please add below spacer mm (1/2 ) 2 19mm (3/4 ) mm (1 ) Installation Ø Nominal ecimal 3 21/ / / / / mm SPR PRT NUMR hrome, 2 mm (5/64 ) M-R8362 or strikers see page 23

19 32 IN M Prolush & ntry OKPIT oor Lock entry harware Sealed to help prevent water intrusion djusting screws provide a tight fit to the door Suitable for doors between 9-13mm vailable with two types of lock plugs - Star lock system, provides high security with a pin tumbler lock plug - 3 wafer flat key (mim) lock, provides security with a stainless steel plug and has a reversible key Shuttered lock plugs protect from debris Oval and square variant available Star Lock System 11 (.433) to 13 (.513) with SPR 9 (.354) 172 (6.78) 108 (4.3) Improved security in a compact package 6 pin tumblers provide similar protection to full sized IN lock Marine grade materials resist corrosion Key features an ergonomic key grip and robust feel Stainless steel lock for strength and corrosion resistance Locks can be matched to other Southco deck latches. ontact Southco Marine for information lat overmolded key provides comfortable grip 26.5 (1.0) 26 (1.0) 61.6 (2.4) 49.6 (2.0) 49.6 (2.0) 164 (6.44) LOK YLINR (Star Lock shown) 3 wafer flat key (mim) system 85.5 (3.4) PRT NUMR Pro lush Latch* Oval Square 26.5 (1.04) LOK YLINR (Star Lock shown) 26 (1.0) 49.6 (2.0) Star Lock M M isc Tumbler Lock M M * Two grip friendly overmolded keys and a keeper supplied (2.4) 49.6 (2.0) or spare keys please contact Southco Marine

20 33 IN & OKPIT entry harware asket Seal SKTS ccessories Mounting Tool keeper mounting tool is available that quickly marks the correct location for the keeper mounting screws 1 2 KPR 3 4 Tightening screws (M4) with a Torx T10 tool provides gasketed seal Keeper 16.6 (0.654) 42 (1.67) Ø 4.4 (.17) thru hole Ø 8 (.315) countersink 28.5 (1.12) 4 (.15) 9.2 (.36) ccessories Oval Spacer Square Spacer (6.0) PRT NUMR M M Mounting Tool M Spacer Spacer accessory available for doors that are 10mm (.42") thick Spacer allows use in thinner door thickness to 9mm (.35") Oval (.056) (.111) 70 ±0.5 (2.76 ±.001) ±0.2 (5.99 ±.007) 139 ±0.5 (5.47 ±.01) R12.7 (.5) 67.4 (2.65) (4.3) (5.5) R10 (.4) Ø 6.2 (.244) Square How to determine your key combination Install keeper with No. 8 or M4 flat head screws (2) RM Keeper OOR Pro lush Ø (.26 ) - 0 Key ode Letter Length

21 34 IN M lush ntry & oor OKPIT Lock entry harware LUSH with Weather proof seal OOR THIKNSS: 12.7mm (1/2 ) or 10mm (3/8 ) with optional spacer. The popular lush sliding-door lock allows for a wide range of movement for sliding doors. The unique, low-profile design allows for a multitude of sliding door designs, even doors that retract into the bulkhead. The flush design allows companionway doors to slide into recessed pockets without interfering with the helm station. llows for mm (4-6 ) more door travel than traditional sliding-door lock styles Safety lock prevents the door from being locked from the inside. To activate: turn key clockwise and remove Shipped with striker and two keys Locks can be matched to other Southco deck latches. ontact Southco Marine for more information vailable Options: Sealing: Weatherproof and watertight seals. Material/inish: Stainless Steel, luminum anodized, lack anodized or White powdercoat. Shape: Oval or rectangular design. ccessories. Spacer to accept a 10mm (3/8 ) door thinkness Mounting tool for striker or spare keys please contact Southco Marine lush Oval lush H LUSH with Watertight seal I LUSH OVL Stainless steel LUSH Standard version, white H I J Nominal ecimal 1/ / / / / / / / / / H I J Nominal ecimal 1/ / / / / / / / / /

22 35 IN & OKPIT entry harware Part Number Selection T Type 1 Standard 2 Weatherproof 3 Splashproof or fully sealed waterproof version please see Prolush on page 32 M - 0 T - S 10 - inish 24 Stainless Steel 50 lack 60 luminium 70 White S Shape 1 Square Short ( = 125.7mm) 2 Square Long ( = 135.7mm, Not in Stainless Steel) 3 Oval (Stainless Steel inish Only) Rad. lush Square Short How to determine your key comb M/S Offshore lush Oval & Square Long M/S Offshore flush mounted M/S Of Ø Nominal 2 1/2 5/16 4 1/2 4 61/64 1/4 ecimal Nominal 2 1/2 5/16 4 1/2 5 5/16 1/4 ecimal Installation 1 2 M/S lush How to determine your key combination lush Key # for ordering sparekey starting with 8 or 9 M/S lush Ova Key # for orderin starting with 8_ Options Spacer accessory available for doors that are 10 mm (3/8 ) thick. The spacers are available in clear or black anodized aluminium. keeper mounting tool is available that quickly marks the correct location for the keeper mounting screws M lack anodized M lear anodized M Oval Spacer (Stainless Steel) Mounting tool part numbers: Standard lush: M Stainless Steel lush: M

23 36 IN M Star Sailor & ntry OKPIT oor Lock NTRY HRWR Suitable for 12mm and 22mm entry door thicknesses Provide high-end security with the Star-Lock system s three-axis six-pin tumbler design Locks can be matched to other Southco deck latches. ontact Southco Marine for more information ssembly 57.4 (2.26) 14 (.55) 95 (3.74) Stamped key combination 15.5 (.61) 76 (2.99). oor thickness (see table) 30.5 (1.20) 57.4 (2.26) R12.5 (.49) TUL M SIZ (.55) M (1.20) 95 (3.74) 1mm gasket to enable 10mm oor thickness 1/2 door M M Stamped key combination Use with M to enable 1mm gasket 15.5 thickness 55.9 to enable (.61) 20mm oor thickness (2.2) 1/2 door thickness Installation Optional spacer 22.2 (.87) 12 (.47) 16.1 (.63) 25.2 (.99) 17.6 R12.5 (.70) 76 (2.99) (.49) Lock module Material and inish Lock ase: 316 Stainless Steel Internal omponents: 316 Stainless Steel Star Plug: rass Spring: 316 Stainless Steel Screws: 316 Stainless Steel asket: Rubber (12mm version) Optional Spacer: 316 Stainless Steel Part number: M Use with M to enable 55.9 (2.2) Optional spacer 22.2 (.87) 12 (.47) 16.1 (.63) 25.2 (.99) 17.6 (.70) 1.5 (.06) 95.5 (3.76) 84 (3.31) 70 (2.76) Panel 53 (2.09) 45 (1.77) Optional Spacer (2mm) R4 (.16) emale Screw x 2 M4 Screw x 2 Part Number Selection M (.08) 94.8 (3.73) 55.4 (2.18) oor Thickness () 3 12mm (.5) 6 22mm (.86)

24 15 (.59) 2 x Ø 3.7 (.15) 15 (.59) 50.8 (2) 4 (.16) 37 Prefered load direction 6 (.24) 11 (.43) M5 IN & Ø OKPIT 12 (.47) M5 NTRY 8 (.32) HRWR Striker lignment Strikers Striker: nodized luminium: M nodized lack: M : 8.6 ±1.3 (.34) ± (.51) : 37.5 ± 2.5 (1.48) ± (.09) : 2.0 ± 1.2 (.80) ± (.04) Prefered load direction 2 x Ø 4.5 (.18) 15 (.59) 8 (.32) 33 (1.3) 13 (.51) 3 (.21) 48 (1.89) P-Striker: nodized luminium: M nodized lack: M : 8.6 ±1.3 (.34) ± (.51) : 37.5 ± 2.5 (1.48) ± (.09) : 2.0 ± 1.2 (.80) ± (.04) Prefered load direction 9 (.35) 15 (.59) 26.8 (1.06) 15 (.59) 50.8 (2) 16 (.63) 2 x Ø 3.7 (.15) 4 (.16) yelet Striker: Stainless Steel: M : 37.5 ± 2.5 (1.48) ± (.09) : 2.9 ± 1 (.11) ± (.03) : 37.5 ± 2 (1.48 ± (.07) : 5.8 ±.4 (.23) ± (.01) Prefered load direction M5 Ø 12 (.47) 6 (.24) 11 (.43) M5 8 (.32)

25 38 IN M Secure ntry & OKPIT oor Lock NTRY HRWR OOR THIKNSS: 12mm (7/16 ) (or 10mm (3/8 ) with optional spacer) The Secure is designed for both swinging and sliding doors. It can be used on acrylic or wood doors, bi-fold doors, hatches, and companionway drop-in boards. The Secure is easy to install, since no fasteners are required - simply snap the Secure over the door edge. Offered in all corrosion-resistant materials, including Polyamide, Stainless Steel, and rass Outside keylocking with interior sliding privacy lock Supplied with striker and two keys vailable Options: inish: White or black polyamide case available. ccessories: Locking: Optional black day key available. Spacer: Optional spacer available to accept a 10mm (3/8 ) door thickness. Striker: Numerous strikers available in clear or black anodised aluminum or stainless steel. ifferent shapes available. or spare keys please contact Southco Marine SUR PRT NUMRS lack White With P-striker and two keys M M SSORIS ay key, black M-96-XXX-41 Striker, anodized aluminum M Striker, anodized black M yelet striker, stainless steel M Nominal ecimal 3 27/ / / yelet striker, offcenter, stainless steel Spacer for 10mm (3/8") door thickness M M

26 39 IN & OKPIT NTRY HRWR s Rad. Nominal ecimal 3 13/ / / / / / / How to determine your key combination Key # for ordering sparekey starting with 8 or Installation

27 40 IN M L-Star ntry & OKPIT oor Lock NTRY HRWR Interior (Privacy knob) Keyway Lock module ain more stylish and more secure locking performance for specialised door applications in sail or motor boat and yacht construction. The Mobella L-Star is ideal for washboard entry ways even those angled up to 7 beyond perpendicular as well as for bi-fold doors and other cabin or entry doors. The security of the Star-Lock mechanism adds peace of mind, while all-marine-grade construction ensures robust performance. nhance high-end security with the hard-to compromise Star-Lock three-axis six-pin tumbler design Locks can be matched to other Southco deck latches ontact Southco Marine for more information Simplify installation with slip-in mounting on the back edge of the door Satisfy customer preferences with a variety of decor options - including diamond brass, polished chrome and satin finishes ccommodate door thicknesses from 19 mm to 45 mm without a recess, and engage with overhead hatches of 10 mm or thicker Part number M Minimum panel thickness 20 mm (0.71), Maximum panel thickness 44 mm (1.75). No mounting hardware included. lush mount panel preparation shown 2X Ø5 (.2) Thru-hole Ø8 ountersunk (3.07) 2X R5.9 (.23) 18 (.71) 2X R6.4 (.25) 18.5 (.73) 15.5 (.61) 8.3 (.33) 96 (3.78) 16.3 (.64) 8.6 (.34) 7.5 (.3) 10.5 (.41) 6 (.24) 2 (.08) 65 (2.56) 11 (0.43) 2 (.09) 45 (1.77) 64 (2.52) 45 (1.77) 60 (2.36) 64.5 (2.54) 12.7 (.5) 16 (.63) 2X Ø5 (.2) Thru-hole ountersunk (3.07) 95 (3.74) 2X R12.5 (.5) R12.8 (.5) R6.4 (.25) Ø23 (.91)

28 41 IN & OKPIT NTRY HRWR Hatch L-Star 0 to 15 Striker Hood The Striker Hood is designed for thin panels, or where the panel may not be suitable to directly attach the striker. Note: striker must be used with the Striker Hood. 95 (3.74) 30 (1.18) Striker Panel 6.5 (.26) 2 (.08) asket Ø6 (.23) 7 (.28) 20 (.8) 12.5 (.49) 90 (3.54) 77 (3.03) 27.8 (1.09) 26.7 (1.05) 4X R6 (.24) 2X Ø4.7 (.19) Thru-hole Ø8 ountersunk 45 Striker Hood Part number M Min 10 (.4) Striker Part number M Minimum panel thickness without recess 19 (.75). ngle range between hatch and panel -7 to +7. No mounting hardware supplied. lush mount panel preparation shown 15 (.59) 77 (3.03) 50 (1.97) 4X R6.35 (.25) 2X Ø8 (.32) Min 21 (.83) 15 (.59) 92 (3.62) 77 (3.03) 50 (1.97) 22 (.87) 8X R6.35 (.25) epth Min 18 (.71) epth 2 (.08) Prebored

29 42 IN M Single Star & ntry OKPIT oor Lock NTRY HRWR The Mobella Single Star-Lock provides the flexibility and functionality of a deadbolt that can be installed alone or combined with another latch mechanism for cabin doors, washboard doors, and other door security. y combining reliable Star-Lock performance, all-marine-grade construction, and a clean look with multiple keyhole finish options, it offers the perfect blend of robustness and style for sail or motor boat and yacht applications. nhance high-end security with the hard-to-compromise Star-Lock three-axis six-pin tumbler design Locks can be matched to other Southco deck latches ontact Southco Marine for more information Mortise mount design provides a clean appearance Satisfy customer preferences with a variety of decor options including diamond brass, polished chrome and satin finishes ccommodate door thicknesses ranging from 22 mm to 45 mm 90 (3.5) 2X Ø5 (.2) Thru-hole Ø8 ountersunk 45 Interior (privacy knob) Lock module Panel Keyway 106 (4.17) 16 (0.63) 6 (0.24) 10.5 (0.41) 7.5 (0.3) 2 (0.08) 8.6 (0.34) (2.25) 16.3 (.64) *see part number table 13 (.51) (4.19) 78 (3.07) 62.5 (2.46) 2.2 (0.09) 16.1 (0.63) 2 (0.08) 16.1 (0.63) 16.5 (.65) 3* 11 (.43) 45 (1.77) How to order Single Star Part number formula M OOR THIKNSS mm (1 1/8-1 1/2 ) mm (7/8-1 3/16 ) mm (1 7/16-1 3/4 ) INISH Handle/Privacy/scutcheons 10 hrome 20 Satin (matte chrome) 40 iamond brass 62 (2.44) 2 (.08) Key side Ø23 (.91) 16.5 (.65) Ø23 (.91) Interior (Privacy knob side) 45 (1.77)

30 43 IN & OKPIT NTRY HRWR Hatch 0 to 15 Striker Hood The Striker Hood is designed for thin panels, or where the panel may not be suitable to directly attach the striker. Note: striker must be used with the Striker Hood. Single Star 95 (3.74) Panel 30 (1.18) 6.5 (.26) Striker 2 (.08) asket Ø6 (.23) 7 (.28) 90 (3.54) 20 (.8) 12.5 (.49) 77 (3.03) 27.8 (1.09) 26.7 (1.05) 4X R6 (.24) 2X Ø4.7 (.19) Thru-hole Ø8 ountersunk 45 Striker Hood Part number M Striker Part number M Min 10 (.4) Minimum panel thickness without recess 19 (.75). ngle range between hatch and panel -7 to +7. No mounting hardware supplied. lush mount panel preparation shown (.59) 77 (3.03) 50 (1.97) 4X R6.35 (.25) 2X Ø8 (.32) Min 21 (.83) 15 (.59) 92 (3.62) 77 (3.03) 50 (1.97) 22 (.87) 8X R6.35 (.25) epth Min 18 (.71) epth 2 (.08) Prebored

31 25 IN & OKPIT entry harware STR PRT NUMRS STR PRT NUMRS ssembly lack Powder oated or top stop installation please refer to page 26. or high seas handle installation please refer to page 29. ur key combination How to determine your key combination M/S Talon M/S Offshore mortise mounted 46 (1.81) M/S Secure Key ode Letter Length M/S lush Oval Key # for ordering sparekey

32 26 IN MM Star Slider & ntry OKPIT oor Lock entry harware Standard Version lush inside Version Top Stop Installation Star-Slider This attractive sliding door lock is the perfect choice for top-of-the-line boats and yachts. Its stylish pivot handles give cabin entries the elegant look and solid performance reminiscent of a luxury hotel suite. omplemented with the highly secure Star-Lock TM mechanism, it enhances the confidence and peace-of-mind of owners Superior Star-Lock TM capability provides enhanced three-axis pin tumbler security one-piece pivot actuation latch with integrated lock mechanism provides reliable performance and a smooth, ergonomic feel in use vailable in two options: 1. Standard version with pivot handle on both sides and 2. lush version with pivot handle on the outside and flush handle on the inside ll locks feature a hold open mechanism, which enables use with electric door operating systems vailable with various latch module mechanisms,that allows usage on recessed doors and frames Top-stop latching feature provides option to secure door in the full open, full closed, or partially open positions, prevents accidental closing even in rough seas esigned for doors in stainless steel and aluminium extrusions its doors from 23mm (0.9 ) to 38mm (1.5 ) or spare keys please contact Southco Marine Latch Module Options Standard Protruding hook Heavy uty 34 9 ± 2 (1.37 ±.07) 19 (0.75) 6 (0.24) 93 (3.7) 4 (0.2) 33 (1.3)

33 27 IN & OKPIT entry MM Star Slider harware Standard Version STR SLIer Part numers Latch Module oor thickness 23 (0.93) (1.12) 28.5 (1.12) (1.32) 33.5 (1.32) - 38 (1.50) Standard MM MM MM Protruding hook MM MM MM Standard top stop feature MM MM MM Heavy uty MM MM MM Protruding hook, top stop feature MM MM MM or thinner doors please contact Southco Marine STR SLIer accessories Mounting tool for striker Top Stop Ramp for top stop MM MM-7520 MM ssembly Inside Outside Latch mechanism options apply to Standard and lush Latch Module Options R4 (4X) (0.16) 30 (1.18) MIN 17.5 (0.69) 35 (1.4) MX R7.5 (0.3) 134 (5.3) 4 (0.2) Ø8 OUNTR SINK 45º 2X (0.17) Ø8 OUNTR SINK 45º 2X (0.31) 69 (3) 126 (5) 40.5 (2) 21 (0.81) 27 (1.1) Ø27 (Ø1.1) Ø8 X2 (0.32) 56 (2.2) entre line of door HVY UTY 120 (4.7) 18 (0.71) 106 (4.2)

34 28 IN MM Star Slider & lush OKPIT Inside Version entry harware Latch Module Locking Mechanism Standard. Star Slider chrome. Offset handle and flushed inside handle. Star Slider chrome. Offset handle and flushed inside handle. Protruding hook. SLIR PRT NUMRS - lush inside version OOR THIKNSS ()* 23 (0.9) mm (1.12) 28.5 (1.12) (1.32) 33.5 (1.32) - 38 (1.50) MM XX-10 MM XX-10 MM XX-10 MM XX-10 MM XX-10 MM XX-10 STR SLIR SSORIS Mounting tool for striker MM Top Stop MM-7520 Ramp for top stop MM ssembly XX = 15 for port closing door XX = 16 for starboard closing door *or use in thinner doors, please contact Southco Marine How to determine your key combination Key ode Letter Length Inside Outside R4.3 (4X) (0.17) 30.6 (1.2) M4 (2X) 3 (0.12) 101 (3.98) MX R7.5 (0.3) 35 (1.4) 31 (1.2) 99 (4) Latch Module Options 49 (2) Ø8 (0.32) 4 (0.2) 30 (1.18) (5) (5.1) R4 (4X) (0.16) (7.1) 21 (0.8) 40.5 (2) 21 (1.1) S RW J-MM-03-3 OR MTHOX UT OUTS 69 (3) Ø27 (1.06) Ø8 (0.32) 121 (4.8) (6.6) 41 (1.6) Ø 19 (Ø0.75) 59 (2.3) Latch Module Options HVY UTY 120 (4.7) 18 (0.71) 106 (4.2)

35 29 IN & OKPIT entry MM Talon harware ntry oor Lock OOR THIKNSS ran: mm (13/16-1 1/2 ) The Talon sliding-door lock is designed for aluminium extrusions, wood, or fiberglass doors. It offers: ll marine-grade materials for superior corrosion resistance Positive-grip latch mechanism keeps doors closed under even extreme conditions Locks can be matched to other Southco deck latches. Please contact Southco Marine for further information High - Seas Handle (optional) Top stop (optional) vailable Options: Locking: Keylocking and non-keylocking versions. Non-keylocking features an exterior lock override. Non-keylocking version includes forend for wooden door applications. inish: variety of finish options includes nodized luminum, Powder oated lack luminum, hrome and rass. ccessories: High-seas Handle: Improved grip with a nice design for heavier doors. Ramp for Top Stop: Prevents the Top stop from interfering with the rail when sliding the door. Top Stop: Stop that holds door at any open position. Mounting tool for striker: Use to align door and striker. or spare keys please contact Southco Marine TLON SSORIS Mounting tool for striker Top Stop High-seas handles for chrome Talon High-seas handles for black Talon Ramp for Top Stop MM MM-7520 MM-7660 MM-7683 MM How to use the mounting tool Talon hrome key locking Ramp (Optional) High Seas Handle Installation 300 ± /16 ± 5/128 Talon chrome & iamond rass without key locking Without Key locking* (egress opening from outside) nodized aluminum Powder coated black aluminum hrome iamond brass TLON PRT NUMRS oor thickness range mm (7/8-1 1/16") mm (13/16-29/32") MM MM MM MM MM MM MM MM mm (1 1/16-1 3/8") MM MM MM MM mm (1 1/8-1 1/2") MM MM MM MM Key locking nodized aluminum Powder coated black aluminum hrome iamond brass MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM

36 30 IN MM Talon ntry & oor OKPIT Lock without entry Key Lock harware Top Stop Installation " Ø c sink Ø through Rad. 4 plcs. Rad. 2 plcs. I Rad. J K Ø M U = (Option for egress opening) Without Key-lock Installation H L S T R X Ø N c sink Rad. O Rad. P Q Ø U Ø V H I J K L M N O P Q R S T U V X min. max. min. max. min. max. Nominal ecimal 5/ / / / / / / / / / / / / / / / / / / / / / / /4.25 1/4.25 9/ Ø Q Ø R H I J K L M N O P Q R H I P J Nominal 1 13/32 1 1/2 2 3/16 3/4 7 9/16 3/8 2 7/ /32 3/4 1 1/2 2 3/16 5 5/8 3 7/16 15/16 1 1/32 9/32 1/4 1/4 L M N O ecimal

37 31 IN & OKPIT MM Talon entry ntry oor harware Lock, Key Locking Ø c-sink Ø through Rad. 4 plcs. Rad. 2 plcs. min. max H I J K L M N O P Q R S T U V min. max min. max I Rad. J K Ø M H L S T Ø N c-sink Nominal ecimal 5/ / / / / / / / / / / / / / / / / / / / / / / / R Rad. O Rad. P Q Ø U Ø V P O Q R N L J H M H I J K L M N O P Q R Nominal ecimal 1 13/ / / / / / / / / / / / / / / / / / Key-locking Installation

38 18 IN MR Omni abin & & OKPIT ockpit oor Lock entry HRWR OOR THIKNSS RN: mm (1/2-3/4 ) The versatile Omni combines high functionality, attractive styling, and quick installation to suit a variety of application requirements. vailable in three versions; each version is constructed of all marine-grade materials, such as stainless steel and S plastics, and offers: Omni 2-step Latch provides flush outer surface Nylon bumpers reduce vibration and prevent door rattle Privacy button option Optional doorkeeper holds door in open position Omni lat Omni Spring olt djustable spring bolt mechanism accommodates frame variation Omni lat oncealed spring bolt eliminates snag points ouble swing action provides solution for multi-position doors Omni 2-step flat, round, sliding deadbolt Omni Spring bolt How to override a locked Omni door lock from the outside H H Nominal ecimal Panel Thickness 3 7/ / / / / / / OMNI PRT NUMRS Spring bolt lat 2 step oor thickness Privacy No privacy Privacy No privacy Privacy No privacy 12.7 mm (1/2) MR MR MR MR MR MR mm (5/8) MR MR MR MR MR MR mm (3/4) MR MR MR MR MR MR eatures Privacy X X - X - djust Spring olt X X - - X X umpers (both sides) X X X X X X Left and Right swing X X X X X X

39 19 IN & OKPIT entry HRWR Rad. Ø min. max min. max min. max Nominal 2 3/16 2 1/4 1/4 9/ /16 3 7/8 1/4 4 3/16 ecimal Privacy Privacy Privacy Privacy djustable spring/dead bolt djustable (Omni spring/dead springbolt) bolt djustable (Omni spring/dead springbolt) bolt djustable (Omni spring/dead springbolt) bolt (Omni springbolt) Installation 2 djustable spring bolt djustable spring bolt djustable (Omni ob) (Omni spring ob) bolt djustable (Omni spring ob) bolt (Omni ob) umper on umper on umper both sides both sides on umper both sides on both sides Options OMNI lat STRIKR PRT NUMR MR OORKPR PRT NUMRS Type White lack 1 MR MR MR MR Type 1 Type 2 OMNI 2MM THIK (5/64 ) SPR PRT NUMR MR (1/2") 18 (11/16") or strikers see page 23

40 20 IN MR Omni Pocket & OKPIT abin oor LockentrY HRWR OOR THIKNSS: 32mm (1-1/4 ) or 35mm (1-3/8 ) The Omni Pocket sliding-door lock is ideal for interior pocket doors and double-doors. It features an automatic latching mechanism, as well as a door-hold open feature. hook on the forend side releases the door. Other features include: Interior privacy button with exterior override Made of durable, corrosion-resistant stainless steel, S plastic, and aluminum ach assembly includes one striker and one door holder Only 3mm (1/8 ) protrusion Quick installation with a simple door cut-out vailable Options: oor Thickness: Options available for doors down to 22.2mm (7/8 ). ontact Southco for details oor holder for Omni Pocket Striker for Omni Pocket Nominal ecimal Panel thickness 3 21/ / / / / Panel Thickness OMNI POKT PRT NUMRS 25mm (1") 32mm (1 1/4") 35mm (1 3/8") MR MR MR

41 44 IN MR Omni ob & Transom OKPIT oor Latch entry HRWR spring bolt OOR THIKNSS RN: 25-51mm (1-2 ) The Omni ob is designed for thicker doors and can be used flat or with spring bolt. There is no protruding springbolt, allowing it to be installed flush to the edge of the door. The unique design latches when it comes in contact with the mating striker. flat OMNI ob bumper It also offers: asily-adjustable springbolts for left- or right-swing are included for fast conversion Single-side version available, suitable for thicker transom doors Nylon bumpers reduce vibration and prevent door rattle Optional doorkeeper holds door in open position omni ob single side H Ø H Nominal ecimal Panel Thickness 3 15/16 1 3/8 5 5/16 15/64 15/64 2 5/32 1 3/ OMNI ob PRT NUMRS oor thickness range mm (1-1-1/4") mm (1-3/16-1-7/16") mm (1-3/8-1-5/8") mm (1-9/ /16") mm (1-3/4-2") MR MR MR MR MR Min. oor Thickness 25 mm - (1") 25 mm - (1") OMNI ob Single PRT NUMRS oor Swing right out/left in left out/right in MR MR

42 45 IN & OKPIT NTRY HRWR s Omni ob Ø Rad. Nominal ecimal 2 11/ / / / / Omni ob single side Rad. Nominal ecimal 2 11/ / / / / Installation Omni ob 1 2 Omni ob single side 1 2

43 83 SS TM HRWR Swim am Latch ssembly Keeper 160 (6.3) Latch 36 (1.42) 38.8 (1.53) Latch base 22.1 (.87) Min. to 31.1 (1.22) Max. Stylish latch for transom and swim platform doors Intuitive operation with push button and turn handle actuation Premium finish and corrosion resistance 19 (.75) ( ) (.94) ( ) (.94) Material and inish: Handle, Keeper, ase button and Sleeve: 316 grade stainless steel electropolished Keeper insert: Nylon black O-ring: PM natural Screw, Spring and Nut: 304 Stainless steel passivated Installation Notes ine tuning latch and keeper alignment: 6X Ø6.35 ±0.1 (.25 ±.004) To increase the height of the latch by 3.75mm (.0156 inch), rotate the base of latch 90 degrees clockwise To decrease the height of the latch by 3.75 (.0156), rotate the base of latch 90 degrees counter clockwise or every 360 degree turn, the height adjusts 1.5 (.0625) Part Number TM rotation both ways TUL SIZ