441 SERIES POWER ADJUSTABLE DOOR CLOSERS

Transcription

1 441 SRIS POWR JUSTL OOR LOSRS Non-handed djustable power range 1 to 6 Universal retrofit hole spacing actory preset to size 3 Power adjustable arm bracket Tri-pack for regular, parallel arm and top jamb installation Maximum 120 opening angle (180 for parallel installation) ull body plastic cover included Precision cast iron housing Rack and pinion mechanism High quality non-gumming and non-freezing hydraulic fluid Separate adjustable sweep and latch speed valves djustable backcheck control from 70 to 85 Optional adjustable hold open function 90 to 170 inishes: aluminum or dark bronze onforms to NSI 156.4, Grade 1 UL listed 10 year limited warranty This heavy-duty multi power closer is designed for high traffic institutional or commercial applications. The full body cover included with this closer provides a clean architectural appearance. Optional mounting accessories and ease of installation offer maximum flexibility.

2 441 SRIS OOR LOSRS SPIITION losers for interior and exterior doors shall be 441 series. loser shall be multi-size with spring power adjustment from sizes 1 to 6. loser shall be surface mounted, full-cycle hydraulic rack and pinion type with cast iron body. loser shall be supplied with a non-handed plastic cover. loser shall project no more than 2 1/4 (57.2mm) from the mounting surface. loser shall have two valves to separately control sweep and latch speeds. Hydraulic fluid shall be non-gumming and non-freezing. loser shall have an independent valve to control the adjustable cushioning backcheck. rackets shall be supplied to permit regular, top jamb or parallel arm installation. loser shall be supplied with all necessary mounting fasteners. rop plates shall be required if door and frame design cannot accomodate a standard installation (refer to parts and accessories). SLTION GUI LOSR MULTI-SIZ SRIPTION 441 Multi-size closer H Multi-size closer with adjustable friction hold open Multi-size closer with cush & stop arm no-hold open Multi-size closer with cush & stop and hold open OOR TYP & MX. OOR WITH KHK Interior 60 (1524.0) xterior 48 (1219.0) HOL OPN N/ N/ LY TION RRIR R QTY PR S N/ L, U 4 WIGHT 60.4 / / 31.8 ORRING XMPL: 441 SRIS OPTION L SIZ HRT IMNSION /16 (287.3) 5 (126.0) 1 (25.4) 3 (76.0) 2 1/4 (57.0) 1 15/16 (49.6) 12 3/16 L x 3 1/2 W x 2 1/4 H (309.6 x 88.9 x 57.2) PRTS & SSORIS P P441-18G P441-18P P441-18TJ rop plate, required for standard installation where door top rail is less than 3 3/4 (95.3mm). Minimum 2 1/4 (57mm) door top rail required rop plate, required for top jamb installation where closer must be flush with top of head frame due to flush ceiling condition. Minimum 1 3/4 (44.5mm) head frame face & minimum 3 1/4 (83mm) door top rail required rop plate, required for parallel arm installation where door top rail is less than 6 (152mm). Minimum 3 (76mm) door top rail required rop plate, required for top jamb installation where head frame face is less than 3 (76mm). Minimum 1 3/4 (44.5mm) head frame face required RM441 RM441 RM441 RM441H Parallel arm, non-handed, extra duty, solid steel forearm and main arm assembly with parallel bracket Parallel arm, non-handed, heavy duty, solid steel forearm and main arm assembly, forged steel parallel bracket with stop Parallel arm, non-handed, adjustable Hold-Open, adjustable forearm with parallel bracket, for standard, top jamb or parallel arm installation with shallow reveal. Parallel arm, non-handed, heavy duty, handle controlled Hold-Open function, solid steel forearm and main arm assembly, forged steel parallel bracket with stop Sex nut bolt for 1 3/4 (44.5mm) door thickness P P441-18P RM441 RM441 RM441 RM441H P441-18G P441-18TJ R8 06/13 L - luminum U - uronodic N/ - Not applicable imensions unless specified otherwise are: Inches (Millimeters)

3 851 SRIS POWR JUSTL OOR LOSRS Non-handed djustable power range 2 to 5 actory preset to size 3 Optional barrier free adjustable power range 1 to 4 Maximum 180 opening angle Precision cast aluminum alloy housing Rack and pinion mechanism Tri-pack for regular, parallel arm and top jamb installation Non-critical thermostatic valves High quality non-gumming and non-freezing hydraulic fluid Power adjustable arm bracket Separate adjustable sweep and latching speed valves djustable backcheck control Narrow profile body cover included Optional adjustable delayed action valve with barrier free model inish: aluminum onforms to NSI 156.4, Grade 1 UL listed 10 year limited warranty This slimline multi power closer offers a variety of features for high traffic institutional applications. The narrow body cover provides a clean architectural appearance and the optional barrier free model complies with requirements.

4 851 SRIS OOR LOSRS SPIITION losers for interior and exterior doors shall be 851 series. loser shall be multi-size with spring power adjustment from sizes 2 to 5. loser shall be surface mounted, full-cycle hydraulic rack and pinion type with cast aluminum alloy body. loser shall be supplied with a non-handed narrow profile plastic cover. loser shall project no more than 2 1/8 (54 mm) from the mounting surface. loser shall have two valves to separately control sweep and latch speeds. Hydraulic fluid shall be non-gumming and non-freezing. loser shall have an independent valve to control an adjustable-cushioning backcheck. rackets shall be supplied to permit regular, top jamb or parallel arm installation and standard arm bracket shall allow 15% power adjustment. loser shall be supplied with all necessary mounting fasteners. OPTIONL: ll barrier free series closers shall be multi-size with spring power adjustment from sizes 1 to 4 and shall have an independent valve to control the delayed action. SLTION GUI LOSR MULTI-SIZ MX OOR WITH INTRIOR XTRIOR MX OOR WIGHT KHK HOL OPN LY TION RRIR R QTY PR S WIGHT (1372.0) 48 (1219.0) 48 (1219.0) 42 (1067.0) 265 / 120 N/ N/ N/ 176 / 80 L / 32.6 ORRING XMPL: 851 SRIS OPTION L SIZ HRT IMNSION /16 (303.0) 12 3/4 (324.0) 3/4 (19.0) 1 7/8 (47.0) NRROW 3 7/16 (87.0) ULL OY NRROW 2 3/16 (56.0) 13 L x 1 7/8 W x 2 1/16 H (330 x 47.6 x 52 ) ULL OY 13 L x 3 W x 2 1/16 H (330 x 76.2 x 52 ) PRTS & SSORIS Sex nut bolt for 1 3/4 (44.5 mm) door thickness (Through bolt machine screw) set of 4 ULL851L ull ody cover ULL851L R4 06/14 L luminum N/ Not applicable imensions unless specified otherwise are: Inches (Millimeters)

5 1900 SRIS POWR JUSTL OOR LOSRS Non-handed djustable power range 2 to 6 Optional barrier free meets requirements Optional barrier free model adjustable power range 1 to 4 with adjustable delayed action actory preset to size 3 Power adjustable arm bracket Maximum 180 opening angle Precision cast aluminum alloy housing Rack and pinion mechanism Tri-pack for regular, parallel arm and top jamb installation Non-critical thermostatic valves High quality non-gumming and non-freezing hydraulic fluid Separate adjustable sweep and latching speed valves ull body plastic cover included Optional adjustable hold open function 90 to 170 djustable backcheck control from 70 to 85 inishes: metallic aluminum, brass plated or dark bronze onforms to NSI 156.4, Grade 1 UL listed 10 year limited warranty The 1900 series multi power closer offers exceptional performance for high traffic applications. This versatile closer is the choice of door hardware specialists for both function and appearance.

6 1900 SRIS OOR LOSRS SPIITION losers for interior and exterior doors shall be 1900 series. loser shall be multi-size with spring power adjustment from sizes 2 to 6. loser shall be surface mounted, full-cycle hydraulic rack and pinion type with cast aluminum alloy body. loser shall be supplied with a non-handed full body plastic cover. loser shall project no more than 3 (76.2mm) from the mounting surface. loser shall have two non-critical thermostatic valves to separately control sweep and latch speeds. Hydraulic fluid shall be non-gumming and non-freezing. loser shall have an independent valve to control the adjustable-cushioning backcheck. rackets shall be supplied to permit regular, top jamb or parallel arm installation and standard arm bracket shall allow 15% power adjustment. loser shall be supplied with all necessary mounting fasteners. OPTIONL: ll 1900 series closers shall be multi-size with spring power adjustment from sizes 1 to 4 and shall have an independent valve to control the delayed action. SLTION GUI LOSR MULTI-SIZ SIZ HRT MX OOR WITH INTRIOR XTRIOR 48 (1220) 42 (1070) MX OOR WIGHT 143 / 65 KHK LY TION HOL OPN RRIR R QTY PR S IMNSION 1900 WIGHT 1900H L, P, U 70 / 32 (1) 264 / 120 N/ N/ (1473) (1321) 1900 N/ 68 / 31 (2) 1900 (3) 61 /28 (1) oor closer with cush and stop hold open arm (2) oor closer with cush and stop no-hold open arm (3) oor closer with adjustable friction type hold open ORRING XMPL: 1900 SRIS OPTION L NO 56 / /8 (283.0) 11 7/8 (302.0) 1 1/8 (29.0) 2 (51.0) 3 3/8 (86.0) 2 3/8 (61.0) 12 1/8 L x 3 H (308.0 x 76.0) PRTS & SSORIS P1900 RM1900 RM1900 RM1900 rop plate Parallel arm, non-handed, extra duty, solid steel forearm and main arm assembly with parallel bracket Parallel arm, non-handed, heavy duty, solid steel forearm and main arm assembly, forged steel parallel bracket with stop Parallel arm, non-handed, adjustable Hold-Open, adjustable forearm with parallel bracket, for standard, top jamb or parallel arm installation with shallow reveal. RM1900H Parallel arm, non-handed, heavy duty, handle controlled Hold-Open function, solid steel forearm and main arm assembly, forged steel parallel bracket with stop Sex nut bolt for 1 3/4 (44.5mm) door thickness (Through bolt and machine screw) P1900 RM1900 RM1900 RM1900 RM1900H R2 06/13 L luminum P rass plated U uronodic N/ Not applicable imensions unless specified otherwise are: Inches (Millimeters)

7 1700 SRIS POWR JUSTL OOR LOSRS Non-handed djustable power range 2 to 5 Optional barrier free model adjustable power range 1 to 4 actory preset to size 3 Power adjustable arm bracket Maximum 180 opening angle Tri-pack for regular, parallel arm and top jamb installation Precision cast aluminum alloy housing Rack and pinion mechanism Non-critical thermostatic valves High quality non-gumming and non-freezing hydraulic fluid Narrow profile plastic cover included Separate adjustable sweep and latching speed valves djustable backcheck control from 70 to 85 inishes: metallic aluminum or dark bronze UL listed 5 year limited warranty The 1700 series multi power closer offers exceptional door control for moderate traffic applications. This all-in-one closer provides door installers with maximum flexibility on site.

8 1700 SRIS OOR LOSRS SPIITION losers for interior and exterior doors shall be 1700 series. loser shall be multi-size with spring power adjustment from sizes 2 to 5. loser shall be surface mounted, full-cycle hydraulic rack and pinion type with cast aluminum alloy body. loser shall be supplied with a non-handed narrow profile plastic cover. loser shall project no more than 2 7/8 (73.0mm) from the mounting surface. loser shall have two non-critical thermostatic valves to separately control sweep and latch speeds. Hydraulic fluid shall be non-gumming and non-freezing. loser shall have an independent valve to control the adjustable-cushioning backcheck. rackets shall be supplied to permit regular, top jamb or parallel arm installation and standard arm bracket shall allow 15% power adjustment. loser shall be supplied with all necessary mounting fasteners. OPTIONL: ll 1700 series door closers shall be multi-sized with spring adjustment from sizes 1 to 4. SLTION GUI LOSR MULTI-SIZ MX OOR WITH INTRIOR XTRIOR MX OOR WIGHT KHK HOL OPN LY TION RRIR R QTY PR S WIGHT (1321) 48 (1220) 48 (1220) 42 (1067) 220 / 100 N/ N/ N/ 176 / 80 L, U / 30.0 ORRING XMPL: 1700 SRIS OPTION L SIZ HRT IMNSION /16 (230.0) 9 3/4 (248.0) 3/4 (19.0) 1 3/4 (45.0) /4 (83.0) 2 7/8 (73.0) 10 9/16 L x 2 1/16 H (269.0 x 53.0) PRTS & SSORIS Sex nut bolt for 1 3/4 (44.5mm) door thickness (Through bolt machine screw) R2 06/13 L luminum U uronodic N/ Not applicable imensions unless specified otherwise are: Inches (Millimeters)

9 700 SRIS SIZ OOR LOSRS Non-handed Sized 1, 2, 3, 4 and 5 Universal retrofit hole spacing Power adjustable arm bracket Maximum 180 opening angle Tri-pack for regular, parallel arm and top jamb installation Precision cast aluminum alloy housing Rack and pinion mechanism Non-critical thermostatic valves High quality non-gumming and non-freezing hydraulic fluid Separate adjustable sweep and latching speed valves Optional adjustable backcheck control from 70 to 85 inishes: aluminum or dark bronze UL listed 5 year limited warranty Optional cover The 700 series surface closer is recommended by door hardware specialists for use on a wide variety of residential and commercial applications with moderate traffic areas.

10 700 SRIS OOR LOSRS SPIITION losers for interior and exterior doors shall be 700 series rack and pinion type with cast aluminum alloy shell. loser shall be non-handed, surface mounted hole spacing by 3/4 (19mm) and shall project no more than, 2 9/16 (65.1mm) for door closer 710 and 2 7/8 (73mm) for all other door closers, from the door surface. loser shall have two non-critical thermostatic valves to separately control sweep and latch speeds. loser shall contain non-gumming and non-freezing hydraulic fluid. rackets shall be supplied to permit regular, top jamb or parallel arm installation and standard arm bracket shall allow 15% power adjustment. loser shall be supplied with all necessary mounting fastners. OPTIONL: 700 series closers shall have an independent adjustable valve to control backcheck cushioning to avoid uncontrolled door opening. SLTION GUI LOSR SIZ OOR TYP MXIMUM OOR WITH OOR WIGHT RNG KHK HOL OPN LY TION RRIR R QTY PR S WIGHT 710 Interior 32 (813.0) xterior N/ / N/ L, U 35.0 / Interior 36 (914.0) / L, P, U 730 xterior 32 (813.0) Interior 44 (1118.0) xterior 36 (914.0) / N/ N/ N/ Reference Parts & ccessories / Interior 48 (1219.0) xterior 44 (1118.0) Interior 52 (1321.0) xterior 48 (1219.0) / / L, U 64.0 / 29.0 ORRING XMPL: 710 SRIS / SIZ OPTION L SIZ HRT SIZ /2 (165) 7 1/8 (181) 1 11/16 (43) 2 7/8 (73) 2 9/16 (65) /16 (208) 8 7/8 (225) 3/4 (19) 1 3/4 (44.5) 3 1/4 (83) 2 7/8 (73) /16 (230) 9 3/4 (248) 750 PRTS & SSORIS PS740L rop plate standard VR720 Plastic cover for 720 and 730 models PN740L rop plate for narrow top rail VR740 Plastic cover for 740 and 750 models Sex nut bolt for 1 3/4 (44.5mm) door thickness (Through bolt machine screw) PS740L PN740L VR R3 06/13 L luminum P rass plated U uronodic N/ Not applicable imensions unless specified otherwise are: Inches (Millimeters)