18 - Engine Control Cables

Transcription

1 18 - Engine Control Cables Engine Control Cables Measuring Controls Cables For a new installation, measure & B distance from the control box along an unobstructed route to throttle or clutch connection on the motor. For outboard engines add a further three feet to allow for engine movement. Round this dimension up to the next whole foot. For replacement cables, measure the existing cable from tip to tip in feet and round up to next whole foot. ny cable bends should always have a minimum diameter of 8 200mm. The MULTIFLEX range of engine control cables are made from non-corrosive materials. Lubricated stainless steel inner cable for maximium efficiency, stainless steel or brass end fittings with reinforced outer poly jacket. Suits sterndrives, inboards and outboards. Minimum bend radius 150mm. Red Jacket Universal Control Cables universal cable with red jacket similar to Morse 33C type cable. 8.5mm diameter outer jacket UNF stainless steel threaded ends. Suits inboard and outboard motor applications. For very long or complex runs use premium cables below. Size range 6 feet (1.83 Mtr) to 25 feet (7.62 Mtr) RWB Premium Universal Control Cable Very flexible and very strong ensuring minimum friction and maximum efficiency. Ideal for long or complex runs with tight radius bends. Blue outer jacket with UNF stainless steel threaded ends. Large size range from 8 feet (2.44 Mtr) to 40 feet (12.19 Mtr) RWB OMC Type Control Cable - Pre 1979 Motors Standard cable with 7mm dia outer jacket. Suits OMC Johnson/ Evinrude outboard motors PRE Exceeds engine manufacturers specifications. Size range 12 feet (3.66 Mtr) to 16 feet (4.88 Mtr) RWB OMC Type Control Cable - fter 1979 Motors Standard cable with 7mm dia outer jacket. Non-corrosive brass and plastic ends. Suits OMC Johnson/Evinrude/BRP motors 1979 to current. Exceeds engine manufacturers specifications. Size range 8 feet (2.44 Mtr) to 20 feet (6.1 Mtr) RWB Mercury Type Control Cable Standard cable with 7mm dia outer jacket. Non-corrosive brass and plastic ends. Suits Mercury/Mercruiser motors 1965 to date (except Gen 11). Exceeds engine manufacturers specifications. Size range 8 feet (2.44 Mtr) to 20 feet (6.1 Mtr) RWB Generation 11 Mercury Type Control Cable Standard cable with 7mm diameter outer jacket. Non-corrosive 1.9mm stainless steel wire and plastic ends. Suits Mercruiser and Mercury Generation 11 motors. Exceeds engine manufacturers specifications. Size range 8 feet (2.44 Mtr) to 20 feet (6.1 Mtr) RWB Page 376 QULITY MRINE PRODUCTS -

2 18 - Engine Control Cables Engine Control Cables Refer to previous page for more information and description of the styles of Multiflex engine control cables available. Refer to table below for RWB product numbers relating to styles and lengths. TSK Supaflex control cables shown on next page. Length Universal Universal OMC OMC Mercury Mercury Feet / Cable Premium Type fter Type GEN 11 Metres Red Jacket Cable Blue Pre Type FT MTR RWB RWB RWB7502 RWB7530 RWB7412 RWB7432 RWB RWB7503 RWB7531 RWB7413 RWB7433 RWB RWB7504 RWB7532 RWB7414 RWB7434 RWB RWB7505 RWB7533 RWB7415 RWB7435 RWB RWB7506 RWB7534 RWB7402 RWB7416 RWB7436 RWB RWB7507 RWB7535 RWB7403 RWB7417 RWB7437 RWB RWB7508 RWB7536 RWB7404 RWB7418 RWB7438 RWB RWB7509 RWB7537 RWB7405 RWB7419 RWB7439 RWB RWB7510 RWB7538 RWB7406 RWB7420 RWB7440 RWB RWB7511 RWB7539 RWB7421 RWB7441 RWB RWB7512 RWB7540 RWB7422 RWB7442 RWB RWB7513 RWB7541 RWB7423 RWB7443 RWB RWB7514 RWB7542 RWB7424 RWB7444 RWB RWB RWB7516 RWB RWB RWB7518 RWB RWB RWB RWB RWB RWB RWB RWB RWB RWB7562 R W BSHM PTY LTD USTRLI Page 377

3 18 - Engine Control Cables & ccessories TSK Superflex Engine Control Cables RWB Code Total Length RWB Code Total Length High quality, high performance TSK Japanese made Superflex universal engine control cables. The most flexible and strongest cable available on the market, for it s size. Extremely low friction cable makes them ideal for long cable runs or complex installations with tight radius turns. The extreme flexibility is achieved by winding smaller cables over the solid core. The inner is then covered with a ribbed nylon coating to ensure minimum friction and maximum efficiency. The spiral wire outer is then impregnated and coated by oil and covered by a blue UV and oil resistant polyethylene outer jacket with S/S ends. Suitable for outboard, inboard and sterndrive engines. Large size range from 10 Ft to 50 Ft. RWB5656 RWB5657 RWB5658 RWB5659 RWB5660 RWB5661 RWB5662 RWB5663 RWB5664 RWB5665 RWB5666 RWB5666B 10 Ft 11 Ft 12 Ft 13 Ft 14 Ft 15 Ft 16 Ft 17 Ft 18 Ft 19 Ft 20 Ft 22 Ft RWB5667 RWB5668 RWB5668B RWB5669 RWB5670 RWB5671 RWB5672 RWB5673 RWB5674 RWB5675 RWB Ft 26 Ft 28 Ft 30 Ft 32 Ft 34 Ft 36 Ft 38 Ft 40 Ft 45 Ft 50 Ft ccessories For Engine Controls nd Cables Neutral Safety Switches Used in conjunction with engine controls to prevent in-gear starting. RWB5620 RWB5621 Ball Joint Model X12 Suits RWB , 5611 Ultraflex controls Model X43 suit RWB1268 & 1269 engine controls Cable Clamp Block Stainless steel cable clamp suits most control cables. RWB5628 Stainless steel with UNF thread suits most common control cables. RWB5626 Cable End Fitting Dual Station Selector Unit For use with single lever engine controls in dual station applications. Enables independent control over throttle and shift from either steering locations. RWB5623 Shim & Clamp Block Cable clamp suits most control cables. RWB5625 Suits most common control cables. Stainless Steel. RWB5627 Clevis UNF connects most standard cables to controls. RWB5630 Page 378 QULITY MRINE PRODUCTS -

4 18 - Engine Controls Single ction Chrome Engine Controls RWB1267 Single action engine controls in side or top mount configuration with single or dual levers. Heavy duty chrome plated brass body and levers complete with plate, clamps and all mounting hardware required. These controls suit most standard brands of engine control cables. Single control - use for either gear or throttle control. Dual control - one for gearbox and one for throttle. RWB1269 RWB1266 RWB1267 RWB1268 RWB1269 RWB5621 SP210 SP211 Side mount - dual control Side mount - single control Top mount - dual control Top mount - single control Neutral safety switch model X43 (see previous page) suits RWB1268 & 1269 engine controls Replacement red control knob Replacement black control knob RWB1268 RWB1266 RWB5609 / 5611 Dual ction Side Mount Engine Controls These attractively designed Ultraflex brand dual action side mount controls allow both gear shift and throttle to be controlled by a single lever for ease of use. Made from black coated non-corrosive marine grade plastic and aluminium. Suits any type of boat with outboard, inboard or inboard/outboard power plants Horizontal or vertical installation on the starboard or port side Positive lock in neutral to prevent accidental gear engagement Suits most popular brands of control cables Handle can disengage shift mechanism for engine warm up Built in friction to avoid throttle creep Single lever operation makes boat easier and safer to manoeuver 3 models available - powerboat / + trim control and sailboat model RWB5609 RWB5611 RWB5610 RWB5620 Powerboat model - controls both throttle and gears in one engine Powerboat model - as above - but with additional trim control Sailboat model - controls both throttle and gears in one engine X12 neutral safety switch (optional) see previous page RWB5610 R W BSHM PTY LTD USTRLI Page 379

5 18 - Steering - Cables & Boxed Kits Multiflex Boxed Steering Kits - Planetary Gear Helm Cable steering kits packaged complete in a display box. Includes a quality planetary geared helm for smoother steering, 90 degree bezel kit with all mounting hardware, and quick connect steering cable with stainless steel ends - just choose cable length required. Kits are available in cable lengths from 8 foot (2.43 metre) to 22 foot (6.70 metre). See below to find how to measure cable length required. Kit does not include steering wheel. See 4 pages further on for our steering wheel range. Code RWB7652 RWB7653 RWB7654 RWB7655 RWB7656 RWB7657 RWB7658 RWB7659 RWB7660 RWB7661 RWB7662 RWB7663 RWB7664 RWB7665 RWB7666 Total Length 8 foot (2.43 Mtr) kit 9 foot (2.73 Mtr) kit 10 foot (3.03 Mtr) kit 11 foot (3.35 Mtr) kit 12 foot (3.66 Mtr) kit 13 foot (3.96 Mtr) kit 14 foot (4.27 Mtr) kit 15 foot (4.57 Mtr) kit 16 foot (4.88 Mtr) kit 17 foot (5.18 Mtr) kit 18 foot (5.49 Mtr) kit 19 foot (5.79 Mtr) kit 20 foot (6.10 Mtr) kit 21 foot (6.40 Mtr) kit 22 foot (6.71 Mtr) kit Multiflex Steering Cables Code Total Length RWB foot 2.44 Mtr RWB foot 2.74 Mtr RWB foot 3.05 Mtr RWB foot 3.35 Mtr RWB foot 3.66 Mtr RWB foot 3.96 Mtr RWB foot 4.27 Mtr RWB foot 4.57 Mtr RWB foot 4.88 Mtr Measuring Steering Cables dd + B + C and subtract 100mm for each 90 degree bend in the cable. For installation through the engine tilt tube, add 305mm (1 ft) to the measure calculated above (When measuring cable length in millimetres (mm) divide by 305 to convert to feet) and then round up to the next whole foot. Multiflex steering cables are quick connect steering cables with stainless steel ends which enable the cable to be attached directly to the tilt tube on all popular brands of engines. It has a minimum bend radius of 200mm and a stroke length of 228mm. These cables are compatible with most Teleflex and Ultraflex helms and cables, and other brands. Code Total Length RWB foot 5.18 Mtr RWB foot 5.49 Mtr RWB foot 5.79 Mtr RWB foot 6.10 Mtr RWB foot 6.40 Mtr RWB foot 6.71 Mtr RWB foot 7.01 Mtr RWB foot 7.32 Mtr RWB foot 7.62 Mtr Page 380 QULITY MRINE PRODUCTS -

6 18 - Steering - Helm & ccessories Steering Helm - Planetary Gears Quick connect single cable helm with a planetary gearing system for smoother steering and minimal feedback, in a compact affordable unit. Suitable for outboard, inboard and sterndrives boats up to around 9 metres and max speed of 50 MPH (80 KPH). The helm is made from non-corrosive cast alloy and can be mounted at 90 or 20 degrees using the appropriate bezel kit, sold separately. Suitable for Multiflex cables and also suits most Ultraflex and Teleflex quick connect steering cables. RWB7630 Steering Helm - planetary gear The helm does not include a shaft key & nut. The key & nut is in the bezel kit - see bezel kits in 20 or 90 degree below - or available on its own - RWB7642 below left. Spare Parts For Multiflex Helm Key & nut for RWB7630 Multiflex helm RWB7642 Spent tube for RWB7630 Multiflex planetary helm RWB7645 Mounting Bezel Kit Cable lock bolts (pair) for RWB7630 Multiflex helm RWB7646 Pair Bezel kit suitable for RWB7630 helm above. Includes bezel, mounting bracket, key & nut for helm and all bezel mounting hardware. 90 degree or 20 degree angle. Transom Mount Kits RWB7635 RWB7636 Swivel clamp blocks are used to support steering cable when it is mounted to the back of the transom. Made from marine grade aluminium and powder coated steel. 2 sizes are available. Both sizes have 285mm length tubes but different length clamps. Standard clamp : Length 103mm. 52mm end to tube. RWB7644 Long clamp : Total length 163mm. 102mm end to tube. RWB degree 90 degree RWB7643 RWB7640 Tiller rm Kits Tiller link arm kits are used for connecting steering cable to engine where the cable is fed through the tilt tube. Stainless steel material. 2 types are available. Swivel ball joint type for easier connection. Fixed length : 290mm RWB7643 djustable length type. Length adjusts from 325mm - 350mm RWB7640 R W BSHM PTY LTD USTRLI Page 381

7 18 - Steering - ccessories Steering - Splashwell Kit Mounting kit used to support steering cable when mounted to the side of the splashwell. Made from marine grade materials aluminium and stainless steel. RWB7638 Swivel Clevis ssembly Drum Steering Cable Stainless steel swivel assembly to suit transom mount and splashwell installations. llows for motor movement and tilt without damaging the cable. RWB7637 For use with old style cable / drum steering systems and other uses such as brake cable on older trailers. Quality 6 x 7 galvanised wire with a blue PVC coating. 3mm galvanised wire inner with 5mm PVC covered outer. RWB metre reel Rigging Flange Kit Rubber Trim Rings Black rubber grommets with grooved lip to finish off the cable hole through outboard motor well. RWB1382 Round 90mm dia. For covering and protecting cables and wiring such as outboard engine control cables and steering cables. Includes 800mm of 50mm I.D flexible and durable spiral hose complete with threaded flange and end cap. The flange can be surface or recess mounted. RWB4474 Cable rigging flange and hose kit Rubber Slop Stoppers Black rubber boots with grooved lip to prevent chafe and finish off cable hole through outboard motor well. RWB1383 Round. Dia : 90mm Depth below : 45mm Cut out : 56mm RWB1384 Oval 135 x 82mm RWB1385 Oval. 135 x 82mm Depth below : 45mm Cut out : 106 x 56mm Page 382 QULITY MRINE PRODUCTS -

8 18 - Steering - Outboard Hydraulic Multiflex Hydraulic Steering Kits Multiflex front mount hydraulic outboard motor steering systems are engineered to exacting standards to provide reliable service. Various models are availble to suit outboard motors up to 300 HP. There is a choice of standard lower cost model - with the hydraulic cylinder made from aluminium - or - heavy duty models with the cylinder made from brass. ll the systems are made from marine grade materials and include quality seals. Multiflex hydraulic steering is supplied in a boxed kit including front mount helm pump (5 turns lock to lock), front mount outboard cylinder, 2 x 24Ft (7.2 metre) hydraulic hoses fitted with brass connectors and 2 x 1 litres of hydraulic oil. The hydraulic hoses supplied have a swaged fitting one end and a re-usable fitting the other end - so, if desired, you can shorten the length of the hoses provided in the kits. 90 HP Standard Duty kit - luminium Cylinder Includes helm pump, front mount outboard cylinder, RWB7902 Configurations of some kits may vary due to manufacturer changes. 115 HP Standard Duty kit - luminium Cylinder Includes helm pump, front mount outboard cylinder, RWB HP Standard Duty kit - luminium Cylinder Includes helm pump, front mount outboard cylinder, RWB HP HEVY Duty kit - Brass Cylinder Includes helm pump, front mount outboard cylinder, RWB HP Standard Duty kit - luminium Cylinder \Includes helm pump, front mount outboard cylinder, RWB HP HEVY Duty kit - Brass Cylinder Includes helm pump, front mount outboard cylinder, RWB7910 RWB Litre oil R W BSHM PTY LTD USTRLI Page 383

9 18 - Steering Wheels - Plastic Sports Wheels lpha 3 Spoke Our most popular steering wheels for smaller power boats. Quality, economical, 3 spoke wheels in 3 different colours. 3 spoke - 340mm (13 1/2 ) diameter Soft-grip wheel easy to hold and use ttractive sports styling luminium hub with tapered bore Non-magnetic - will not affect the compass 3 colours available - Black, white or grey Supplied in open faced retail box packaging RWB7723 RWB7724 RWB7725 Black White Grey Sports Wheel Sigma 3 Spoke Quality, economical, modern styled, 3 spoke sports wheels ideal for smaller powerboats. 3 spoke - 280mm (11 ) diameter Soft-grip wheel easy to hold and use ttractive sports styling luminium hub with tapered bore Non-magnetic - will not affect the compass Supplied in open faced retail box packaging RWB7726 Black 280mm Sigma wheel Plastic 3 Spoke US made 3 Spoke black thermo-plastic steering wheel. Strong and attractive well priced wheel. 325mm diameter. RWB7720 Plastic 4 Spoke US made 4 Spoke black thermo-plastic steering wheel. Economical, yet looks good looks and has high strength. 345mm diameter. RWB7721 Stylish 3 Spoke Italian made RIVIER 3 Spoke black plastic steering wheel with centre cap. Relatively economical, yet looks great and performs well. 350mm diameter. RWB7700 Leather Look 4 Spoke US made thermoplastic wheel with leather look finish. Soft outer grip 4 spoke black steering wheel. Strong and attractive. 345mm diameter. RWB7722 Page 384 QULITY MRINE PRODUCTS -

10 18 - Steering Wheels - luminium luminium 3 Spoke luminium 3 Spoke Italian made MNT sports wheel. Silver aluminium centre with black leather look soft grip rim. Strong and looks great! 355mm diameter. RWB7708 Silver / black Italian made MNT sports wheel. Black aluminium centre with grey leather look soft grip rim. Strong and looks great! 355mm diameter. RWB7709 Black / grey luminium 3 Spoke luminium 3 Spoke Italian made DELFINO black aluminium sports wheel with soft easy grip rim. Very strong construction and looks great! 310mm diameter. RWB7704 Italian made DELFINO black aluminium sports wheel with soft easy grip rim. Very strong construction and looks great! 340mm diameter. RWB7705 GMM luminium Sports Wheel Quality black anodised aluminium 350mm steering wheel with textured leather-look polyurethane rim and moulded hand grips. It has a flat bottom to provide additional leg room for the skipper. luminium hub with standard tapered bore. 3 spoke - 350mm (14 ) diameter Flat bottom for additional leg room Leather-look soft-grip rim Moulded hand grips ttractive sports styling Black anodised aluminium with tapered bore RWB7728 GMM sports wheel 350mm ZET Carbon Sports Wheel ttractive modern steering wheel with carbon fibre look insert, polyurethane leather look soft grip outer and brushed blackened aluminium centre and hub. 300mm (12 ) diameter with tapered bore. 3 spoke - 300mm (12 ) diameter Carbon fibre look insert on base and sides Leather-look soft-grip outer rim Moulded hand grips ttractive sports styling Black anodised aluminium with tapered bore RWB7727 ZET sports wheel 300mm R W BSHM PTY LTD USTRLI Page 385

11 18 - Steering Wheels - Stainless Steel Stainless 6 Spoke With Easy Grip Rim Italian made TIMONE stainless steel steering wheels with a soft easy grip thermo-plastic covering on the rim. 6 spoke, dished, standard 3/4 tapered bore. Looks good, feels and performs well. RWB7712 RWB mm 400mm Stainless Powerboat Wheels Stainless steel rim and spokes with machined aluminium hub and black plastic dress cap degree dished spokes. Standard 3/4 tapered bore. Size shown is overall diameter. 3 diameter sizes to choose from. RWB mm /2" RWB mm - 18" RWB mm - 20" Stainless Wheels - With Control Knob Stainless steel with finger grips and speed control knob feature - Built-in finger grips all around the wheel rim for excellent grip Speed control knob for fast and easy turning of the wheel 20 degree dished Standard 3/4 tapered bore 2 diameter sizes to choose from RWB mm (13 1/2") RWB mm (15 1/2") Stainless Sports Wheels - With Control Knob These all 316 grade stainless steel sports wheels feature - Built-in finger grips all around the wheel rim for excellent grip Control knob for fast and easy turning of the wheel 20 degree dished Standard 3/4 tapered bore ttractive sports styling 2 diameter sizes to choose from RWB mm 13 1/2 RWB mm 15 1/2 Stainless steel speed knob attaches to steering wheels allowing faster and easier steering control. Integral stainless bracket simply attaches to the rim of the steering wheel. Suits most types of wheels. RWB669 Speed Control Knob Page 386 QULITY MRINE PRODUCTS -