CM80i autopilot. CM80i intelligence without rudder feedback. coursemaster autopilots

Transcription

1 cm80i CM80i autopilot. CM80i intelligence without rudder feedback The CM80i breaks new ground in intelligent autopilots. The new features of this system make it both easier to install and very easy to use. The intelligence built into the system means that there is no need for a rudder transducer, and the system adjusts itself to suit the boat speed and sea state. The CM80i s compact design fits easily into almost any small boat dash.

2 cm80i expanded installation cm80i cm80i 12VDC supply (cm840) CM437 RATE GYRO compass cm840 junction Box SECOND STATION* GPS plotter* cmpr0612 hydraulic drive *optional specifications CM80i intelligence The CM80i has been developed primarily for boats fitted with outboard motors and hydraulic steering that are from 5 to 10 metres in length. It is also suitable for boats fitted with stern drives and inboard motors. The CM80i s intelligent, self-tuning software has eliminated the need for a rudder feedback unit and the simplicity of the whole autopilot system means that it is a more affordable option for all recreational fishermen and trailerboat owners. The CM80i has these components: Control head which suits dash mount Rate gyro compass Junction box Hydraulic drive Installation can be completed easily and, once installed, requires a simple once only set up procedure which takes less than a minute. The CM80i interfaces with GPS and has a heading output for use with radar. For larger vessels, please refer to for our full range of autopilots. CM80i AUTOPILOT SYSTEM ENVIRONMENTAL: O-50ºC STEERING SYSTEM TYPES: Hydraulic POWER CONSUMPTION: Standby 300mAmps@12VDC Pilot 2.5amps@20% duty cycle using standard hydraulic pump CM80i CONTROLLER DISPLAY: Backlit LCD dot matrix ALARMS: Off course, watch keeping, system DIMENSIONS: 95mm x 55mm MOUNTING: Panel mount, bracket mount CABLE: 4m CM840 JUNCTION BOX INPUT VOLTAGE: 12VDC MOTOR DRIVE: 15Amp cont HEADING SENSOR: Rate gyro compass INTERFACE: NMEA 0183, 2 x input, 1 x output DIMENSIONS: 205mm x 140mm x 45mm CM437 RATE GYRO COMPASS ACCURACY: 2degrees RMS ROLL/PITCH: +/- 35 degrees DIMENSIONS: 95mm x 55mm CABLE: 8m HYDRAULIC DRIVE CMPR0612 VOLTAGE: 12VDC TYPE: Reversing CAPACITY: 0.6L/min These specifications are correct at the time of publication. Coursemaster reserves the right to modify specifications in the interest of improving product quality. For more detailed specifications see our website distributed by: Australia s world leader in autopilot technology AUSTRALIA P Ph F Fax E sales@coursemaster.com A 2/66 Gibbes St Chatswood NSW 2067 ABN W USA P Ph F Fax A 232 Richardson St Greenpoint New York PMA 6932

3 cm82i CM82i autopilot CM82i intelligence Proven reliability, easy to install, no rudder feedback Designed for powerboats with hydraulic steering 5-10m in length with either outboard motor, stern drive, or inboard motor, the new CM82i autopilot frees a set of hands and when interfaced with a GPS, makes it the perfect solution for any fishing trip.

4 cm82i expanded installation CM82i CONTROLLER 12VDC SUPPLY cm840 junction Box GPS plotter* RATE GYRO COMPASS HYDRAULIC DRIVE *optional specifications CM82i AUTOPILOT SYSTEM ENVIRONMENTAL: O-50ºC STEERING SYSTEM TYPES: Hydraulic POWER CONSUMPTION: Standby Pilot duty cycle using standard hydraulic pump CM82i simplicity and affordability Installation is very straightforward with 4 main components, and the intelligent software in the CM82i has eliminated the need for a rudder feedback unit in the wet engine well. Apart from the fuel cost savings that may be achieved from the enhanced course holding, the simplicity of whole system means it is an affordable Coursemaster CM82i autopilot s rate gyro compass maximises autopilot performance and minimises the effects of acceleration, roll, and pitch. It allows the autopilot to steer a more accurate course with less rudder movement resulting in lower power consumption. For further details on Coursemaster s full range of tough, reliable leisure necessity for all recreational or and commercial autopilots professional fishermen and trailer boat owners. manufactured in Australia and suitable for vessels ranging from 5m 150m, Manufactured to perform in one of please refer to our website the harshest marine environments in the world, the Australian-made CM82i CONTROLLER DISPLAY: Backlit Custom LCD ALARMS: Off course, watch keeping, system DIMENSIONS: 110mm x 110mm MOUNTING: Panel mount CABLE: 4m CM840 JUNCTION BOX INPUT VOLTAGE: 12VDC MOTOR DRIVE: 15 Amp cont HEADING SENSOR: Rate gyro compass INTERFACE: NMEA 0183, 2 x input, 1 x output DIMENSIONS: 205mm x 140mm x 45mm CM437 RATE GYRO COMPASS ACCURACY: 2 degrees RMS ROLL/PITCH: +/- 35 degrees DIMENSIONS: 95mm x 55mm CABLE: 8m HYDRAULIC DRIVE CMPR0612 VOLTAGE: 12VDC TYPE: Reversing CAPACITY: 0.6L/min The specifications above are correct at the time of publication. Coursemaster reserves to the right to modify specifications in the interest of improving product quality. For more detailed specifications see our website distributed by: AUSTRALIA P Ph F Fax E sales@coursemaster.com A 2/66 Gibbes St Chatswood NSW 2067 ABN W USA P Ph F Fax A 232 Richardson St Greenpoint New York COU 20766

5 cm85i CM85i the intelligent autopilot solution for sail and power CM85i autopilot Cruising to your next destination has never been more relaxing! With simple one-touch control, intelligent self-tuning software and rate gyro compass, the Coursemaster CM85i is the perfect autopilot solution for both power and sailing vessels from 6m to 40m. U Large graphics display rudder angle, backlit LCD wide viewing angle on screen display of GPS information compact 110 x 110 mm waterproof case U Intelligent, self-tuning software automatically adjusts for speed, sea conditions and trim U Interfaces GPS, wind instruments, digital compass information U Autotack, autogybe with adjustable angle U Rate gyro compass accurate courseholding reduced fuel consumption performance stability U Auto/manual compass calibrations U Drive options linear, hydraulic, rotary, solenoid U Remote options second station, remote steering, jog lever, electric steering

6 cm85i expanded installation CM85i THE RELIABLE CREW Manufactured to perform in one of the harshest marine environments in the world, the Australian-made Coursemaster CM85i autopilot s self-tuning automatically adjusts according to boat speed, sea conditions and trim. The rate gyro compass maximises autopilot performance and minimises the effects of acceleration, roll and pitch. The combination of these two features means that the autopilot is able to steer a more accurate course with less rudder movement resulting in lower power consumption and less wear and tear on the vessel s steering system. Simple to operate, the CM85i offers skippers the convenience and reliability of an extra hand on the helm. specifications CM85i AUTOPILOT SYSTEM specifications ENVIRONMENTAL: -10 C +50 C HEADING SENSOR: Rate gyro compass or NMEA digital INTERFACE: NMEA 0183, 2 x inputs, 1 x output STEERING SYSTEM TYPES: Hydraulic, mechanical, solenoid ALARMS: Off course, watch keeping, system monitors POWER CONSUMPTION: Standby: 300m 12VDC Pilot: % duty cycle Using standard hydraulic pump or mechanical motor CM85i CONTROLLER DISPLAY: Backlit LCD DIMENSIONS: 110mm x 110mm x 50mm MOUNTING: panel mount CABLE: 6m CM840 junction box INPUT VOLTAGE: 12VDC MOTOR DRIVE: 15 amp cont / 30 amp peak DIMENSIONS: 205mm x 140mm x 45mm CM841 JUNCTION BOX INPUT VOLTAGE: 12-35VDC MOTOR DRIVE: 25 amp cont / 40 amp peak DIMENSIONS: 270mm x 140mm x 45mm CM120 RUDDER FEEDBACK DIMENSIONS: 95mm x 55mm (Arm 145mm) CABLE: 10m CM437 RATE GYRO COMPASS ACCURACY: 2 degrees RMS ROLL/PITCH: +/- 35 degrees DIMENSIONS: 95mm x 55mm CABLE: 8m REMOTE CONTROL Hand-held, Jog Lever or Electric Wheel Steering DRIVE UNITS HYDRAULIC DRIVES: Reversing 0.6L, 1L, 2L Continuous Running 2L, 4L LINEAR DRIVES: Hydraulic, mm stroke ROTARY DRIVE: Reversing motor with sprocket drive, electromagnetic clutch, torque 30 rpm SOLENOID DRIVE: Connection to hydraulic solenoids To view full details and specifications for all drive units and other options available for this pilot, please visit our website: The specifications above are correct at the time of publication. Coursemaster reserves the right to modify specifications in the interest of improving product quality. For further details on Coursemaster s full range of tough, reliable leisure and commercial autopilots manufactured in Australia and suitable for vessels ranging from 5m 150m, please refer to our website distributed by: Australia s world leader in autopilot technology AUSTRALIA P Ph F Fax E sales@coursemaster.com A 2/66 Gibbes St Chatswood NSW 2067 ABN W USA P Ph F Fax A 232 Richardson St Greenpoint New York Paul McCarthy Advertising 6556

7

8

9 cm880 CM880 THE intelligent autopilot for professionals. The robust, high performance commercial CM880 autopilot incorporates all the intelligence and specialised features required for optimal steering of workboats, large trawlers and freighters of 50 10,000 tonnes or more. It offers simple panel controls for course change, yaw, trim, rate control and mode functions even when wearing thick work gloves. Practical design for ease of operation and efficiency Enhanced course holding accuracy Adjustable turn rate Choice of automatic and manual trim Trim for weather helm, towing off-centre loads, or trawling Yaw control for reducing rudder activity in heavy seas Precision rudder control through adaptive rudder loop Large graphic display of heading and settings Backlit panel labels and adjustable display brightness LED bar indicator showing rudder angle Magnetic or digital compass Advanced navigation equipment interface GPS plotter and radar system interface Supports standard rudder and nozzle-style steering gear Single package unit for easy installation Designed and manufactured to IMO standards

10 cm880 expanded installation CM880 Controller GPS/Plotter* Radar (NMEA) 10V-35VDC SUPPLY CM653/CM654 REMOTE HELM HANDHELD CM427 fluxgate compass CM428 Compass Slave GYRO COMPASS (NMEA)* CM656 ELECTRIC WHEEL STEERING CM730/CM630/ CM530 RUDDER ANGLE INDICATOR CM880 intelligence The high performance commercial autopilot CM880 is the result of over three years of working closely with workboat and freighter captains, ongoing software development and exhaustive sea trials in some of the world s harshest marine environments. The advanced, intelligent software built into the CM880 ensures enhanced course holding accuracy with minimal rudder movement. Coursemaster also offers an optional CM528 analogue steering interface to suit 360-degree nozzle and jet drive steering systems. The CM880 accepts heading inputs from a fluxgate compass, flat top compass slave, or a digital input from a gyrocompass and naturally all NMEA navigation sentences are supported. A range of optional remote steering positions and remote helms may also be fitted offering the helmsman more flexibility and freedom to carry out watch keeping and navigation. The CM880 incorporates the performance and safety features required by the IMO and similar regulatory bodies. Its electronics have a high level of protection against supply fluctuations and electromagnetic interference. For the full range of tough, reliable commercial and leisure pilots manufactured in Australia by Coursemaster Autopilots, please refer to our website CM626 RATE GYRO Solenoid Drive* CM125 HEAVY DUTY RUDDER FEEDBACK STANDARD SYSTEMS OPTIONS CM528 ANALOGUE STEERING INTERFACE * CUSTOMER SUPPLY CM880 AUTOPILOT SYSTEM SPECIFICATIONS INPUT VOLTAGE: VDC ENVIRONMENTAL: 0-50ºC STEERING SYSTEM TYPES: Hydraulic, solenoid activated POWER CONSUMPTION: 0.3A at 12 24V HEADING SENSORS: Coursemaster CM427 Fluxgate, CM428 Compass Slave or digital (NMEA) INTERFACING: Standard NMEA 0183 DUAL INPUT PORTS OUTPUT: Selectable HDG or HDT sentence ALARMS: Watch-keeping System, Full Helm, Off Course, Drive Stall, Overload and Compass Fault CM880 CONTROLLER DIMENSIONS: 290mm x 144mm x 111mm MOUNTING: Flush mount or tilt bracket INPUT VOLTAGE: V Nominal. 35V Max OUTPUT DRIVE: 2 Amps CM125 RUDDER FEEDBACK DIMENSIONS: Base: 100mm dia. Height: 125mm Actuator Arm: 165mm MOUNTING: Horizontal, vertical, inverted CM427 FLUXGATE COMPASS OUTPUT: Sine/Cosine ACCURACY: 2degrees RMS ROLL/PITCH: +/- 35 degrees DIMENSIONS: 95mm dia. x 55mm CABLE: 8m AUSTRALIA P Ph F Fax E sales@coursemaster.com A 2/66 Gibbes St Chatswood NSW 2067 ABN W USA P Ph F Fax A 232 Richardson St Greenpoint New York distributed by: Australia s world leader in autopilot technology REMOTE CONTROL Hand-held Cable Remote, Jog Lever or Electric Wheel Steering CM626 RATE GYRO Provides a far steadier course than any autopilot using only fluxgate compass, and completely overcomes any acceleration effects or magnetic field influences. DIMENSIONS: 95mm dia. x 55mm HYDRAULIC STEERING A range of self-contained continuous running solenoid activated pump kits to suit various size hydraulic steering systems. ANALOGUE STEERING INTERFACE A CM528 Analogue Steering Interface provides control to propulsion systems such as Kamewa, Rolls Royce and Ulstein. The specifications above are correct at the time of publication. Coursemaster reserves to the right to modify specifications in the interest of improving product quality. PMA 8358

11 c o u r s e m a s t e r a u t o p i l o t s C M CM950 AUTOPILOT The intelligent autopilot system for both power and sail 6m 40m. Suitable for casual cruising, returning to a favourite fishing mark, or setting off on a long haul ocean adventure, the CM950 offers the strength and reliability of an extra hand on the helm. v New compact panel-mount control head with: Course control knob with course trim keys Backlit LCD display of heading and rudder angle Eight backlit keys for simple access to control options GPS navigation data on screen when in use On-screen alarm messages v Interfaces GPS, wind instruments, satellite and gyro compasses v Autotack, Autogybe with adjustable angle v Auto and Manual compass calibrations v Rate gyro compass Accurate course holding Reduced rudder activity Reduced power consumption leading to reduced fuel consumption on power boats v Drive options Linear, hydraulic, rotary, solenoid v Remote options Second station, remote steering, jog lever, follow-up lever, electric steering helm v Australian made and exported world wide

12 c o u r s e m a s t e r a u t o p i l o t s EXPANDED INSTALLATION C M CM950 OPTIONAL 2ND STATION (ONLY WITH CM941) 12VDC (CM940) 12V-35VDC (CM941) CM940/941 JUNCTION BOX GPS/PLOTTER* WIND INSTRUMENTS CM437 RATE GYRO COMPASS ROTARY DRIVE CM654 REMOTE HELM HANDHELD HYDRAULIC DRIVE CM656 ELECTRIC WHEEL STEERING LINEAR DRIVE CM630/CM530 RUDDER ANGLE INDICATOR SOLENOID DRIVE CM120 RUDDER FEEDBACK CM428 COMPASS SLAVE K E Y * STANDARD SYSTEMS OPTIONS CUSTOMER SUPPLY CM950 Coursemaster Autopilots has specialised in autopilot design and manufacture for over 35 years and offers a depth of technical steering expertise and service support. The CM950 autopilot s compact, panel-mount control head features the convenient course change knob with course trim keys and simple one touch functions. Featuring specific requirements for short-handed round-the-world sailing and tournament fishing, the CM950 will enhance your enjoyment of your time on your boat. Manufactured to perform in one of the harshest marine environments in the world, all Coursemaster Autopilots feature the unique rate gyro compass to maximise performance and minimise the effects of roll and pitch, resulting in lower power consumption and enhanced course keeping. For further details on Coursemaster s full range of tough, reliable leisure and commercial autopilots manufactured in Australia and suitable for vessels ranging from 5m 150m, please refer to our website specifications CM950 AUTOPILOT SYSTEM SPECIFICATIONS ENVIRONMENTAL: -10 deg +50 degc HEADING SENSOR: Rate gyro compass or NMEA digital INTERFACE: NMEA 0183, 2 x inputs, 1 x output STEERING SYSTEM TYPES: Hydraulic, mechanical, solenoid, linear ALARMS: Off course, watch keeping, system monitors POWER CONSUMPTION: Standby: 12VDC Pilot: 20% duty cycle Using standard hydraulic pump or mechanical motor CM950 CONTROLLER DISPLAY: Backlit LCD DIMENSIONS: 160mm x 110 mm x 27 mm MOUNTING: panel mount CABLE: 6m CM940 JUNCTION BOX INPUT VOLTAGE: 12VDC MOTOR DRIVE: 15 Amp cont / 30 Amp peak DIMENSIONS: 207mm x 140mm x 45mm CM941 JUNCTION BOX INPUT VOLTAGE: 12-35VDC MOTOR DRIVE: 25 Amp cont / 40 Amp peak DIMENSIONS: 265mm x 140mm x 45mm CM120 RUDDER FEEDBACK DIMENSIONS: 95mm x 55mm (Arm 145mm) CABLE: 10m CM437 RATE GYRO COMPASS ACCURACY: 2 degrees RMS ROLL/PITCH: +/- 35 degrees DIMENSIONS: 95mm x 55mm CABLE: 8m To view full details and specifications for all drive units and other options available for this pilot, please visit our website: The specifications above are correct at the time of publication. Coursemaster reserves to the right to modify specifications in the interest of improving product quality. distributed by: AUSTRALIA p: f: e: sales@coursemaster.com a: 2/66 Lower Gibbes St Chatswood NSW 2067 ABN w: USA p: f: a: 232 Richardson St Greenpoint New York 11222