Retain Ring System. Retain Ring (a) 'O' Ring Seal Retainer (b) Pipe sizes 1 1/2" through 10" are available for use with retain ring flanges.
|
|
- Reginald Greer
- 6 years ago
- Views:
Transcription
1 Retain Ring System Retain Ring (a) 'O' Ring Seal Retainer (b) The retain ring configuration uses heavy wall pipe and has a machined butt end face, along with an annular groove on the outside diameter. After machining, the flange is slipped onto the pipe and a retain ring (a) which consists of a segmented stainless steel ring bound by a spiral wound stainless steel spring is sprung over the pipe s outside diameter nesting in the annular groove. Bolting the flanges together draws them against the retain rings with the o ring seal retainer (b) captive within the connection. Pipe sizes 1 1/2" through 10" are available for use with retain ring flanges. The standard connection styles offered conform to SAE and ISO 4-bolt flanges along with Tube-Mac Industries 8-bolt/12-bolt proprietary flanges. Other flange patterns may also be available. 1
2 TMI Retain Ring onnection Procedure The retain ring flange connection consists of machined pipe, retain ring flanges, retain rings, o ring seal retainer and bolting hardware. Step 1: Pipe supplied with butt end machined along with an annular groove on the outside diameter. Step 2: Slip flange onto the pipe. Step 3: Retain ring is sprung over the pipe s outside diameter nesting in the annular groove. Step 4: Select the correct o ring seal retainer style (reference pages 4-5). The o ring provides a seal against the butt end of the pipe. Step 5: Select the required bolting hardware from Section R of this catalogue. arefully place the o ring seal retainer in between the pipe ends. Slide the flanges forward and the o ring seal retainer becomes captive within the flanges. Step 6: Tighten bolts to the torque values specified. Always tighten bolts in a cross-over sequence and ensure that the flanges are parallel. 2 T U B E - M A I N D U S T R I E S
3 Retain Ring System - Visual Index PIPES ARBON STEEL PIPE STAINLESS STEEL PIPE RETAIN RING FLANGES RF34 SAE ODE 61 WITH LEARANE HOLES RF64 SAE ODE 62 WITH LEARANE HOLES 1 1 / 2 "- 10" Page 6 4"- 10" Page 7 1 / 2 "- 3" Page 8 RFT34 RFT64 RF74 RFA48/RFA412 SAE ODE 61 WITH UN TAPPED HOLES SAE ODE 62 WITH UN TAPPED HOLES ISO 6164 WITH LEARANE HOLES TMI 8-BOLT/12-BOLT WITH LEARANE HOLES 1 / "- 2" 1 / 2 "- 3" 1 / 2 Page 8 Page 9 "- 2" 21 / "- 4" 5"- 10" 2 Page 9 2 Page 10 RF49 RFA49 TMI 9-BOLT WITH LEARANE HOLES TMI 9-BOLT WITH LEARANE HOLES RETAIN RING R RA Page / 2 "- 4" Page 12 5" Page 12 1 / 2 "- 4" Page 13 5"- 10" 'O' RING SEAL RETAINER OS OSA OSS OSP Page 13 1 / 2 "- 4" Page 14 5"- 10" Page 14 4" Page 14 1 / 2 "- 4" Page 15 OSAP OSH OSHS OP 'O' RING ONNETOR PLATE 5"- 10" Page 15 1 / 2 "- 4" Page 16 4" Page 16 1 / 2 "- 4" PIPE ASSEMBLIES PAR RETAIN RING FLANGE PIPE ASSEMBLY BPAR RETAIN RING FLANGE BENT PIPE ASSEMBLY Page 17 RETAIN RING FLANGE ELBOW 1 1 / 2 "- 8" Page / 2 "- 8" RFE BODY ONLY Page A/RFE ASSEMBLY 1 1 / 2 "- 8" Page / 2 "- 8" Page 23 3
4 Retain Ring onnections - Heavy Wall Pipe Typical Pipe Union onnection RETAIN RING FLANGE RF STYLE (ref. pages 8,10,11) PIPE (ref. pages 6-7) RETAIN RING FLANGE RF STYLE (ref. pages 8,10,11) O RING SEAL RETAINER OS STYLE (ref. page 14) RETAIN RING UNION BOLT KIT (ref. page R10) Typical Pipe to Flat Face onn ection TYPIAL MANIFOLD RETAIN RING FLANGE RF STYLE (ref. pages 8,10,11) PIPE (ref. pages 6-7) O RING SEAL RETAINER OS STYLE (ref. page 14) OMPONENT BOLT KIT (ref. page R11) Typical Butt Weld Adapter Union onnection BUTT WELD ADAPTER BWAA STYLE (ref. pages M5-M7) RETAIN RING FLANGE RF STYLE (ref. pages 8,10,11) O RING SEAL RETAINER OS STYLE (ref. page 14) BUTT WELD ADAPTER BWAA STYLE (ref. pages M5-M7) UNION BOLT KIT (ref. page R18) RETAIN RING FLANGE RF STYLE (ref. pages 8,10,11) 4 T U B E - M A I N D U S T R I E S
5 Retain Ring onnections - Heavy Wall Pipe Typical Pipe to O Ring Face Retain Ring omponent onnection RETAIN RING FLANGE RF STYLE (ref. pages 8,10,11) RETAIN RING PIPE (ref. pages 6-7) RETAIN RING FLANGE RF STYLE (ref. pages 8,10,11) TYPIAL ADAPTER (ref. pages F2-F4) O RING SEAL RETAINER OSH STYLE (ref. page 16) UNION BOLT KIT (ref. page R13) Typical O Ring Face Retain Ring omponent to SAE Split onnection RETAIN RING FLANGE RFT STYLE (ref. page 9) RETAIN RING SPLIT FLANGE SF STYLE (ref. page N20) TYPIAL ADAPTER (ref. pages F2-F24) TAPPED O RING TO O RING ONNETOR PLATE OP STYLE (ref. page 17) OMPONENT BOLT KIT (ref. page R15) TYPIAL SPLIT FLANGE END Typical Pipe to SAE Split onnection RETAIN RING FLANGE RFT STYLE (ref. page 9) PIPE (ref. pages 6-7) TAPPED RETAIN RING SPLIT FLANGE SF STYLE (ref. page N20) O RING SEAL RETAINER OSH STYLE (ref. page 16) TYPIAL SPLIT FLANGE END OMPONENT BOLT KIT (ref. page R16) 5
6 TMI arbon Steel Pipe Suitable for High Pressure Retain Ring Heavy Wall Pipe WALL O.D. **RANDOM - SEE BELOW TMP52D A519 - DIN 2391c St 52.4 NBK Ph osphated High Quality Bendable old Drawn Seamless arbon Steel Nominal Pipe OD x Wall Bore Dia. Working Pressure (mm) (in) lbs/ft PSI (bar) 1 1/2 TMP52D-56x150x** 56 x (420) 2 TMP52D-66x200x** 66 x (420) 2 1/2 TMP52D-80x250x** 80 x (400) 3 TMP52D-97x300x** 97 x (400) 4 TMP52D-115x400x** 115 x (400) **INDIATE LENGTH (inches), AVAILABLE IN RANDOM LENGTHS UP TO 360. TMP106HR A106B - leaned Seamless arbon Steel Schedule XXS/160 Nominal Pipe OD x Wall Bore Dia. Working Pressure (in) (in) lbs/ft PSI (bar) 5 TMP106HR-SHXXS-500x** x (350) 6 TMP106HR-SHXXS-600x** x (350) 8 TMP106HR-SH x** x (275) 10 TMP106HR-SH x** x (275) **INDIATE LENGTH (inches), AVAILABLE IN RANDOM LENGTHS UP TO 480 TO ORDER A RETAIN RING FLANGE PIPE ASSEMBLY REFERENE PAGE MAXIMUM ALLOWABLE WORKING PRESSURES ARE BASED ON THE LOWER OF THE PIPE RA TING PER ANSI B31.3 OR THE ONNETI ON RATING 6 T U B E - M A I N D U S T R I E S
7 TMI Stainless Steel Pipe Suitable for High Pressure Retain Ring Heavy Wall Pipe WALL O.D. **RANDOM - SEE BELOW TMP304SS/316SS A312 - Seamless Stainless Steel (supplied as dual certification ie. 304/304L or 316/316L) Schedule XXS/160 Nominal 304/304L Stainless Steel 316/316L Stainless Steel OD x Wall Bore Dia. Working Pressure Pipe Pipe (in) (in) lbs/ft PSI (bar) 4 TMP304SS-SHXXS-400x** TMP316SS-SHXXS-400x** x (400) 5 TMP304SS-SHXXS-500x** TMP316SS-SHXXS-500x** x (350) 6 TMP304SS-SHXXS-600x** TMP316SS-SHXXS-600x** x (350) 8 TMP304SS-SH x** TMP316SS-SH x** x (275) 10 TMP304SS-SH x** TMP316SS-SH x** x (275) **INDIATE LENGTH (inches), AVAILABLE IN RANDOM LENGTHS UP TO 240 TO ORDER A RETAIN RING FLANGE PIPE ASSEMBLY REFERENE PAGE MAXIMUM ALLOWABLE WORKING PRESSURES ARE BASED ON THE LOWER OF THE PIPE RA TING PER ANSI B31.3 OR THE ARBON STEEL ONNETI ON RATING FOR PIPING SYSTEMS ONSISTING OF ALL STAINLESS STEEL OMPONENTS, PRESSURE RATINGS WILL BE LESS THAN THAT SHOWN ABOVE (ONTAT FATORY) 7
8 Retain Ring s SAE - s with learance Holes To be used with heavy wall retain ring pipe only Ref. pages 6-7 H LEARANE HOLE A G B P E M N RF34 Retain Ring - SAE ode 61 With learance Holes Standard Pressure Series PSI ( bar) Dimensions (in) Bolt Working Bolt Minimum lbs/pc Pressure Torque A B G H M N P E Grade 5 PSI (bar) ft.lbs. 1/2 RF /16 UN (350) /4 RF /8 UN (350) RF /8 UN (350) /4 RF /16 UN (275) /2 RF /2 UN (210) RF /2 UN (210) /2 RF /2 UN (175) RF /8 UN (140) RF64 Retain Ring - SAE ode 62 With learance Holes High Pressure Series 6000 PSI (420 bar) Dimensions (in) Bolt Working Bolt Minimum lbs/pc Pressure Torque A B G H M N P E Grade 5 PSI (bar) ft.lbs. 1/2 RF /16 UN (420) /4 RF /8 UN (420) RF /16 UN (420) /4 RF /2 UN (420) /2 RF /8 UN (420) RF /4 UN (420) FOR BOLT KITS - REFERENE SETION R MATERIAL: FORGED ARBON STEEL, YELLOW ZIN DI HROMATE PLATED, (STAINLESS STEEL AVAILABLE) 8 T U B E - M A I N D U S T R I E S
9 Retain Ring s SAE - s with Tapped Holes To be used with heavy wall retain ring pipe only Ref. pages 6-7 TAPPED HOLE H A G B P E M N RFT34 Retain Ring - SAE ode 61 With Tapped Holes Standard Pressure Series PSI ( bar) Dimensions (in) Tap Working Bolt UN-2B lbs/pc Pressure Torque A B G H M N P E PSI (bar) ft.lbs. 1/2 RFT / (350) /4 RFT / (350) RFT / (350) /4 RFT / (275) /2 RFT / (210) RFT / (210) /2 RFT / (175) RFT / (140) RFT64 Retain Ring - SAE ode 62 With Tapped Holes High Pressure Series 6000 PSI (420 bar) Dimensions (in) Tap Working Bolt UN-2B lbs/pc Pressure Torque A B G H M N P E PSI (bar) ft.lbs. 1/2 RFT / (420) /4 RFT / (420) RFT / (420) /4 RFT / (420) /2 RFT / (420) RFT / (420) MATERIAL: FORGED ARBON STEEL, YELLOW ZIN DI HROMATE PLATED, (STAINLESS STEEL AVAILABLE) 9
10 Retain Ring s ISO s with learance Holes LEARANE HOLE T To be used with heavy wall retain ring pipe only Ref. pages 6-7 H E H RF74 Retain Ring - ISO 6164 With learance Holes 5800 PSI (400 bar) Dimensions (in) Bolt Working Bolt Minimum lbs/pc Pressure Torque T H E Grade 5 PSI (bar) ft.lbs. 2 1/2 RF /4 UN (400) RF UN (400) RF /8 UN (400) FOR BOLT KITS - REFERENE SETION R MATERIAL: ARBON STEEL, YELLOW ZIN DIHROMATE PLATED, (STAINLESS STEEL AVAILABLE) 10 T U B E - M A I N D U S T R I E S
11 Retain Ring s TMI 8-Bolt/12-Bolt - s with learance Holes LEARANE HOLE T To be used with heavy wall retain ring pipe only Ref. pages 6-7 E OD RFA48 Retain Ring - TMI 8-Bolt With learance Holes 5000 PSI (350 bar) Dimensions (in) Working Bolt Bolt/Stud lbs/pc Pressure Torque T OD E PSI (bar) ft.lbs. 5 RFA UN (350) RFA /8 B7 stud (350) RFA /2 B7 stud (350) FOR BOLT KITS - REFERENE SETION R MATERIAL: ARBON STEEL, YELLOW ZIN DIHROMATE PLATED, (STAINLESS STEEL AVAILABLE) RFA412 Retain Ring - TMI 12-Bolt With learance Holes 4000 PSI (275 bar) Dimensions (in) Working Bolt Bolt/Stud lbs/pc Pressure Torque T OD E PSI (bar) ft.lbs. 10 RFA /2 B7 stud (275)
12 Retain Ring s TMI 9-Bolt - s with learance Holes LEARANE HOLE T To be used with heavy wall retain ring pipe only Ref. pages 6-7 E OD RF49 Retain Ring - TMI 9-Bolt With learance Holes For use with Retain Ring onnection to 9-Bolt Ball Valve BBVG27 (reference page P10) PSI ( bar) Dimensions (in) Bolt Working Bolt Minimum lbs/pc Pressure Torque T OD E Grade 5 PSI (bar) ft.lbs. 2 1/2 RF /2 UN (290) RF /8 UN (280) RF /8 UN (275) RFA49 Retain Ring - TMI 9-Bolt With learance Holes For use with Retain Ring onnection to 9-Bolt Ball Valve BBVG27 (reference page P10) 3860 PSI (265 bar) FOR BOLT KITS - REFERENE SETION R Dimensions (in) Bolt Working Bolt Minimum lbs/pc Pressure Torque T OD E Grade 5 PSI (bar) ft.lbs. 5 RFA /4 UN (265) MATERIAL: ARBON STEEL, YELLOW ZIN DIHROMATE PLATED, (STAINLESS STEEL AVAILABLE) 12 T U B E - M A I N D U S T R I E S
13 Retain Ring t D (INSIDE DIA.) R Retain Ring - 1/2"- 4" RA Retain Ring - 5"- 10" Retain Dimensions (in) Ring D t lbs/pc 1/2 R /4 R R /4 R /2 R R /2 R R R RA RA RA RA MATERIAL: STAINLESS STEEL - AISI 302/304 SPRING TEMPER 13
14 O Ring Seal Retainer OS/OSA OSS (4 only) O RING 2 O RING 1 O RING 2 O RING 1 D D D1 L L OS O Ring Seal Retainer for Retain Ring Pipe - 1/2"- 4" omplete with Buna O Rings (Standard) OSA O Ring Seal Retainer for Retain Ring Pipe - 5"-10" omplete with Buna O Rings (Standard) Retainer Dimensions (in) O Rings 1&2 (Buna) D L lbs/pc 1/2 OS-050-* OR* /4 OS-075-* OR* OS-100-* OR* /4 OS-125-* OR* /2 OS-150-* OR* OS-200-* OR* /2 OS-250-* OR* OS-300-* OR* OS-400-* OR* OSA-500-* OR* OSA-600-* OR* OSA-800-* OR* OSA-1000-* OR* * INSERT V TO INDIATE OPTIONAL VITON O RINGS ANNOT BE USED FOR ONNETION TO STAUFF BALL VALVE (BBVG27), REFERENE OSS-400 (SEE BELOW) OSS O Ring Seal Retainer for Retain Ring Pipe - 4 For use with Retain Ring onnection to 9-Bolt Ball Valve BBVG27 (reference page p10) omplete with Buna O Rings (Standard) Retainer Dimensions (in) O Ring 1 O Ring 2 (Buna) (Buna) D D1 L lbs/pc 4 OSS-400-* OR* OR* * INSERT V TO INDIATE OPTIONAL VITON O RINGS MATERIAL: ARBON STEEL, YELLOW ZIN DIHROMATE PLATED, (STAINLESS STEEL AVAILABLE) 14 T U B E - M A I N D U S T R I E S
15 O Ring Seal Retainer With Pilot Port O RING 2 O RING 1 D (INSIDE DIA.) PLUGGED #4 SAE PORT 7/16-20UNF L OSP O Ring Seal Retainer with Pilot Port for Retain Ring Pipe - 1/2"- 4" omplete with Buna O Rings (Standard) and #4 SAE Port (Plugged) OSAP O Ring Seal Retainer with Pilot Port for Retain Ring Pipe - 5"-10" omplete with Buna O Rings (Standard) and #4 SAE Port (Plugged) Retainer Dimensions (in) O Rings 1&2 (Buna) D L lbs/pc 1/2 OSP-050-* OR* /4 OSP-075-* OR* OSP-100-* OR* /4 OSP-125-* OR* /2 OSP-150-* OR* OSP-200-* OR* /2 OSP-250-* OR* OSP-300-* OR* OSP-400-* OR* OSAP-500-* OR* OSAP-600-* OR* OSAP-800-* OR* OSAP-1000-* OR* * INSERT V TO INDIATE OPTIONAL VITON O RINGS ANNOT BE USED FOR ONNETION TO STAUFF BALL VALVE (BBVG27), REFERENE OSS-400 (REFERENE PREVIOUS PAGE, 14) MATERIAL: ARBON STEEL, YELLOW ZIN DIHROMATE PLATED, (STAINLESS STEEL AVAILABLE) 15
16 O Ring Seal Retainer O RING D (INSIDE DIA.) L OSH O Ring Seal Retainer for Retain Ring Pipe omplete with Buna O Ring (Standard) Retainer Dimensions (in) O Ring (Buna) D L * INSERT V TO INDIATE OPTIONAL VITON O RING lbs/pc 1/2 OSH-050-* OR* /4 OSH-075-* OR* OSH-100-* OR* /4 OSH-125-* OR* /2 OSH-150-* OR* OSH-200-* OR* /2 OSH-250-* OR* OSH-300-* OR* OSH-400-* OR* ANNOT BE USED FOR ONNETION TO STAUFF BALL VALVE (BBVG27), REFERENE OSHS-400 (SEE BELOW) MATERIAL: ARBON STEEL, YELLOW ZIN DIHROMATE PLATED, (STAINLESS STEEL AVAILABLE) OSHS O Ring Seal Retainer for Retain Ring omponent - 4 For use with Retain Ring omponent onnection to 9-Bolt Ball Valve BBVG27 (reference page P10) omplete with Buna O Ring (Standard) Retainer Dimensions (in) O Ring (Buna) D L * INSERT V TO INDIATE OPTIONAL VITON O RINGS lbs/pc 4 OSHS-400-* OR* MATERIAL: ARBON STEEL, YELLOW ZIN DIHROMATE PLATED, (STAINLESS STEEL AVAILABLE) 16 T U B E - M A I N D U S T R I E S
17 O Ring onnector Plate L D OP O Ring onnector Plate for Retain Ring omponents Retainer Dimensions (in) D L lbs/pc 1/2 OP /4 OP OP /4 OP /2 OP OP /2 OP OP OP MATERIAL: ARBON STEEL, YELLOW ZIN DIHROMATE PLATED, (STAINLESS STEEL AVAILABLE) 17
18 Retain Ring Pipe Assembly Heavy Wall Pipe Typical PAR Assembly FLANGE 1 FLANGE 2 OMPLETE ASSEMBLY ONSISTS OF: ONE (1) LENGTH OF LEAN PIPE (REF. PAGES 6-7) TWO (2) RETAIN RING FLANGES (REF. PAGES 8-12) TWO (2) RETAIN RINGS ENDS SEALED WITH 6 MIL HEAT SHRINK MATERIAL (1 1/2" - 3") ENDS SEALED WITH POSITIVE LOSURE (4" - 8") TO BE ORDERED SEPARATELY: O RING SEAL RETAINER(S) (REF. PAGES 14-16) RANDOM LENGTHS ±1/16 Ref. pages 6-7 PART NO. (EXAMPLE): PAR/56 x F34 - F T U B E - M A I N D U S T R I E S
19 Retain Ring Pipe Assembly omplete Assembly Part Number Pipe Assembly - Retain Ring Pipe Material arbon Steel (Standard) No Designation Required ode PAR PAR Pipe Pipe & Length Options Material Wall/Schedule 1 2 Pipe Material Stainless Steel (Optional) Ref. page (7) Pipe & Wall Ref. page (6) Phosphated old Drawn Seamless arbon Steel A519-DIN 2391c St NBK Pipe & Schedule Ref. page (6) leaned Seamless arbon Steel A106B TMP304SS TMP316SS 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8" RF34 SAE ode 61 W/learance Holes *RFT34 SAE ode 61 W/Tapped Holes x8.5 66x8.5 80x10 97x12 115x15 SHXXS-500 SHXXS-600 SH F34 FT34 Type arbon Steel Yellow Zinc Dicromate Plated Ref. pages (8-12) Length RF64 SAE ode 62 W/learance Holes *RFT64 SAE ode 62 W/Tapped Holes RF74 ISO 6164 W/learance Holes RFA48 TMI 8-Bolt W/learance Holes **RF49 TMI 9-Bolt W/learance Holes **RFA49 TMI 9-Bolt W/learance Holes Specify (in.) F64 FT64 F74 FA48 F49 FA49 Options Painted (Specify) P omplete Stainless Steel Assembly: (including flanges) SS O Ring seal retainers are to be ordered separately (reference pages 14-16) STAINLESS STEEL IS AVAILABLE (ONSULT FATORY) **FOR USE WITH 9-BOLT BALL VALVE ONNETIONS (REFERENE PAGE P10) * NORMALLY USED FOR ONNETION TO SPLIT FLANGE TYPE ENDS PART NO. (EXAMPLE): PAR/56 x F34 - F ASSEMBLY WORKING PRESSURE RATINGS ARE SUBJET TO THE LESSER OF THE FLANGE OR PIPE RA TINGS SEE REFERENE PAGES INDIATED ABOVE FOR PRESSURE RATINGS FOR BOLT KITS - REFERENE SETION R 19
20 Retain Ring Bent Pipe Assembly Heavy Wall Pipe Typical BPAR Assembly OMPLETE ASSEMBLY ONSISTS OF: R ONE (1) LENGTH OF BENT LEAN PIPE (REF. PAGES 6-7) TWO (2) RETAIN RING FLANGES (REF. PAGES 8-12) TWO (2) RETAIN RINGS ENDS SEALED WITH 6 MIL HEAT SHRINK MATERIAL (1 1/2" - 3") ENDS SEALED WITH POSITIVE LOSURE (4" - 8") TO BE ORDERED SEPARATELY: O RING SEAL RETAINER(S) (REF. PAGES 14-16) ANGLE ±1/2 FLANGE 1 L2 ±1/16 FLANGE 2 L1 ±1/16 PART NO. (EXAMPLE): BPAR/56 x F34 - F Dimensions (in) L(min) 1 1/ / R 20 T U B E - M A I N D U S T R I E S
21 Retain Ring Bent Pipe Assembly omplete Assembly Part Number ode BPAR Pipe Material Pipe & Wall/Schedule 1 2 Length L1 Angle Length L2 Options Bent Pipe Assembly - Retain Ring BPAR Pipe Material arbon Steel (Standard) No Designation Required Pipe Material Stainless Steel (Optional) Ref. page (7) TMP304SS TMP316SS Pipe & Wall Ref. page (6) Phosphated old Drawn Seamless arbon Steel A519-DIN 2391c St NBK 1 1/2" 2" 2 1/2" 3" 4" 56x8.5 66x8.5 80x10 97x12 115x15 Pipe & Schedule Ref. page (6) leaned Seamless arbon Steel A106B 5" 6" 8" SHXXS-500 SHXXS-600 SH RF34 SAE ode 61 W/learance Holes F34 *RFT34 SAE ode 61 W/Tapped Holes FT34 RF64 SAE ode 62 W/learance Holes F64 Type arbon Steel Yellow Zinc Dicromate Plated Ref. pages (8-12) *RFT64 SAE ode 62 W/Tapped Holes RF74 ISO 6164 W/learance Holes RFA48 TMI 8-Bolt W/learance Holes **RF49 TMI 9-Bolt W/learance Holes FT64 F74 FA48 F49 O Ring seal retainers are to be ordered separately (reference pages 14-16) **RFA49 TMI 9-Bolt W/learance Holes FA49 Length L1 Specify (in.) Angle Max. 90 Specify ( ) Length L2 Specify (in.) Options Painted (Specify) P omplete Stainless Steel Assembly: (including flanges) SS STAINLESS STEEL IS AVAILABLE (ONSULT FATORY) **FOR USE WITH 9-BOLT BALL VALVE ONNETIONS (REFERENE PAGE P10) * NORMALLY USED FOR ONNETION TO SPLIT FLANGE TYPE ENDS PART NO. (EXAMPLE): BPAR/56 x F34 - F ASSEMBLY WORKING PRESSURE RATINGS ARE SUBJET TO THE LESSER OF THE FLANGE OR PIPE RA TINGS SEE REFERENE PAGES INDIATED ABOVE FOR PRESSURE RATINGS FOR BOLT KITS - REFERENE SETION R 21
22 Retain Ring Elbow Long Radius Bent Elbow - Body Only L ±1/16 D R 90 ±1/2 L ±1/16 RFE Retain Ring Elbow - Body Only Body Dimensions (in) Working Pressure Only (Body Only) (Body Only) L R D lbs/pc PSI (bar) 1 1/2 RFE (420) 2 RFE (420) 2 1/2 RFE (400) 3 RFE (400) 4 RFE (400) 5 RFE (275) 6 RFE (255) 8 RFE (240) OTHER RADII AVAILABLE (ONSULT FATORY) TO ORDER OMPLETE ASSEMBLY REFERENE PAGE 23 MATERIAL: ARBON STEEL, (STAINLESS STEEL AVAILABLE - ONSULT FATORY) 22 T U B E - M A I N D U S T R I E S
23 Retain Ring Elbow Assembly omplete Assembly Part Number O RING SEAL RETAINER (TYP. BOTH ENDS) OS FOR LEARANE HOLE FLANGES OR OSH FOR TAPPED HOLE FLANGES Typical A/RFE Assembly OMPLETE ASSEMBLY ONSISTS OF: ONE (1) RETAIN RING FLANGE ELBOW BODY (REF. PAGE 22) TWO (2) RETAIN RING FLANGES (REF. PAGES 8-12) TWO (2) RETAIN RINGS TWO (2) O RING SEAL RETAINERS (REF. PAGES 14-16) ENDS SEALED WITH 6 MIL HEAT SHRINK MATERIAL (1 1/2" - 3") ENDS SEALED WITH POSITIVE LOSURE (4" - 8") FLANGE 2 FLANGE 1 L ±1/16 (ASSEMBLED) L ±1/16 (ASSEMBLED) Body Material arbon Steel (Standard) Assembly Retain Ring Elbow Body Material Stainless Steel (Optional) Ref. page (7) Body No Designation Required TMP304SS TMP316SS 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8" RF34 SAE ode 61 W/learance Holes ode A RFE F34 A RFE Body Options Material 1 2 L Dimension will vary if OSH O Ring Seal Retainer is used. (reference page 16) Dimensions (in) L (OS/OSA) 1 1/ / Type arbon Steel Yellow Zinc Dicromate Plated Ref. pages (8-12) *RFT34 SAE ode 61 W/Tapped Holes RF64 SAE ode 62 W/learance Holes *RFT64 SAE ode 62 W/Tapped Holes RF74 ISO 6164 W/learance Holes RFA48 TMI 8-Bolt W/learance Holes FT34 F64 FT64 F74 FA48 STAINLESS STEEL IS AVAILABLE (ONSULT FATORY) **FOR USE ONLY WITH 9-BOLT BALL VALVE ONNETION (REFERENE PAGE P10) * NORMALLY USED FOR ONNETION TO SPLIT FLANGE TYPE ENDS (SUPPLIED WITH OSH STYLE O RING SEAL RETAINER) PART NO. (EXAMPLE): A/RFE F34 - F34 Options **RF49 TMI 9-Bolt W/learance Holes **RFA49 TMI 9-Bolt W/learance Holes Viton Painted (Specify) F49 FA49 V P ASSEMBLY WORKING PRESSURE RATINGS ARE SUBJET TO THE LESSER OF THE FLANGE OR BODY RATINGS SEE REFERENE PAGE INDIATED ABOVE FOR PRESSURE RATINGS FOR BOLT KITS - REFERENE SETION R omplete Stainless Steel Assembly: (including flanges, 'O' Ring seal retainers) SS 23
24 Notes 24 T U B E - M A I N D U S T R I E S
G-RANGE PIPE CONNECTIONS
G-RANGE PIPE ONNETIONS G-RANGE PIPE ONNETIONS Designed to meet the requirements of plant operators. Due to their efficiency, lightness and reliability, together with extreme qualities of leak tightness,
More informationØ5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
More informationQUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
More informationflowconme Types of Fittings Available Wall Thickness Sch 5 - Sch 160 (Sch 5s - Sch 160s) Others available upon special request
FITTINGS Overview Types of Fittings Available 45, 9 Elbows, 18 Returns (Short & Long Radius) Tees & Crosses (equal & reducing), Reducers (concentric & eccentric), Caps, Stud Ends, Weldolets, Outlets, Laterals
More informationASME 350 BAR SAE 690 BAR
GENERAL HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 SAE 6000 PSI ASME 350 BAR Product Page GS-ASME s 350 bar 203 SAE 690 bar - Grooving
More informationGS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
More informationValves. Model Code Breakdown. Valves. Steel High Pressure Steel Ball Valves. Steel High Pressure Steel Ball Valves
Steel Ball Steel Ball Model Code Breakdown AB2 N1-1/2 _ 1 1 D B Valve Series Connection Type/Size N NPTF Pipe Thread S SAE Straight Thread Adapter & Stem Seals B Buna - Standard V Viton Bore Restriction
More informationSAE FLANGES V C. Specialists in VESCOR. Hydraulic Reservoirs and Accessories
SAE FLANGES V C VESCOR Specialists in Hydraulic Reservoirs and Accessories V C TABLE OF CONTENTS V C General Information / Split Flange Clamp............................page 1 Welding Information / Simplified
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationBV3H & BV4H True Multi-Way
6, PSI trunnion type with stock L/T/X ball patterns Supports high port-to-port ΔP ~ s from ¼" to " all DMI for pricing & availability if you require higher pressure or larger multi-way valves. DMI V3H
More informationFull Opening Swing CHECK VALVE - API 6D
Full Opening Swing CHECK VALVE - API 6D Table of Contents: Manufacturing Range 3 Features & Benefits 4 Drawings 6 Sizes & Dimensions 8 Pressure / Temperature Reference 14 Flow Coefficients (Cv) 14 How
More informationProduct Catalog. Rev. 612 r1
Product Catalog Rev. 612 r1 PIPE FITTINGS CONDUIT FITTINGS PRODUCT CATALOG Pipe Nipples Welded and Seamless Carbon Steel 2 Pipe Nipples Welded and Seamless Stainless Steel 3 Pipe Nipples End Finishes 4
More informationLong Welding Neck Flanges Catalogue
Hydraulic & Offshore Supplies Long Welding Neck Flanges Catalogue YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE LONG WELDING NECK FLANGES
More informationWellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
More informationC&C Industries, Inc. Phone: Toll Free: Fax: Website: C&C Hammer Unions
Hammer Unions C&C Industries, Inc. Phone: 73-- Toll Free: 877-99-99 Fax: 73--75 Website: www.candcvalve.com C&C Hammer Unions Figure 00...3 Figure 0... Figure 200...5 Figure 20... Figure 20...7 Figure
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
More informationGUJARAT NARMADA VALLEY FERTILIZERS & CHEMICALS LIMITED 50,000 MTPA PAC PROJECT ANNEXURE 6.4 SECTION 4-07 PROCUREMENT SPECS FOR FORGED VALVES
GUJARAT NARMADA VALLEY FERTILIZERS & HEMIALS LIMITED 50,000 MTPA PA PROJET ANNEXURE 6.4 SETION 4-07 PROUREMENT SPES FOR FORGED VALVES ONTENT 1.0 GENERAL 2.0 DESIGN 3.0 TESTS 4.0 INSPETION 5.0 SHIPMENT
More informationENGINEERING & SERVICES PVT LTD
ENGINEERING & SERVICES PVT LTD www.sankalpenggservices.com CERTIFICATIONS About Sankalp Incorporated in 1996, Sankalp focused in Oil & Gas Field Components, primarily OCTG, Well Head, Drilling and Down
More informationRigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1
Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine
More informationB U I L D I N G C O N N E C T I O N S T H AT L A S T
B U I L D I N G C O N N E C T I O N S T H AT L A S T pipe to pipe and people to people. We pride ourselves in providing the finest-quality pipe products and services with integrity and dedication to superior
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
More informationFittings and Tubing QS Series
Fittings and Tubing QS Series Medium Since 1945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned
More information+91-8048078009 Kanti Enterprises http://www.kantienterprises.in/ We are amongst the leading Manufacturers, Exporters and Suppliers of this impeccable range of Products like Pipes & Tubes, Flanges, Pipe
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationCAST IRON FITTINGS STANDARD
060-1 CAST IRON FITTINGS STANDARD ITEM 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 90 ELL 11.03 15.95 6.99 7.29 8.62 12.24 16.93 26.45 90 REDUCING ELL * 22.20 14.69 12.27 15.44 31.19 41.74 45 ELL 13.59 14.60
More informationTABLE OF CONTENTS FLANGE PLATES INSERTA IBP, IOP, IGC, ISP
TABLE OF CONTENTS INTRODUCTION -9 MODULAR CONNECTORS 0- INSERTA ICX, IEL, ITR, ITB, IPS Code 6 & Code 6 4-Bolt, Flange Type INSERTA ICX, IEL, ITR, ITB, IPS, IPC UNIFIED Code U6 4-Bolt, Flange Type INSERTA
More informationKO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
More informationHydraulic Flanges & Components & Dual Seal Flanges
Hydraulic Flanges & Components & Dual Seal Flanges L Hydraulic Flanges and Components Flange Clamps FCS Flange Clamps Split FCC Flange Clamp Captive FHS3 Code 61 Flange Clamps Metric FHS6 Code 62 Flange
More informationSTOPPLE Plus Fittings
STOPPLE Plus Fittings Sizes: 4- Through 36-inch Bulletin No: 1100.007.02 Version: 08.2014 Cross Indexing No: n/a Supercedes: 1100.007.01 (06.2014) Offset in closeup Options Description STOPPLE Plus fittings
More informationTUBES & PIPES SAE 6000 PSI INFORMATION GENERAL. Seamless Colddrawn AISI 316 L -Tube 211
GENERAL SAE 6000 PSI Product Page HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 Seamless Colddrawn AISI 316 L -Tube 211 Hydraulic Tube E 355
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationUNITED BRAND FITTINGS
FLANGE DETAILS Class 5 S ize O.D. B.C. T Bolt Hole Bolt Dia. & of Dia. Length Bolts 4.75 5/ 8 4 x 4 50 4 x 4 3 4 4 x 4 4 00 5/ 4 x 3 8 5.00 50 5/ 7/ 8 4 x 3 8 6.00 50 7/ 8 4 x 3 8 8 3.50.75 8 7/ 8 4 x
More informationYSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
More informationCarbon or stainless Steel
For Technical Assistance and Sales Contact: FlexEJ Ltd Tel: +44 (0) 1384 881188 Email: sales@flexej.co.uk Fax: +44 (0) 1384 896875 Web: www.flexej.co.uk Section 6 FLEXIBLE HOSES TYPE FSH SERIES METALLIC
More informationGROUP 11 HYD. PUMPS & VALVES
GROUP 11 HYD. PUMPS & VALVES T944 EXTENDO PUMP INSTALLATION, FL-14490... 11-2 PUMP ASSEMBLY, LL-7500-11... 11-4 PUMP ASSEMBLY, LL-7500-11, (PUMP SECTION, LL-7501-15)... 11-6 PUMP ASSEMBLY, LL-7500-11,
More informationBALL VALVE DATA SHEET NO. 01 (150#)
BALL VALVE DATA SHEET NO. 01 (150#) VALVE CODE BF101 VALVE TYPE Double Flanged Full Port BODY MATERIAL CARBON STEEL TO ASTM A 216 Gr. WCB CLASS 150# DESIGN STANDARD ISO 17292 SIZE 1/2" TO 1 1/2" 2" TO
More informationSUZHOU LETE VALVE CO.,LTD.
SUZHOU LETE VALVE CO.,LTD. Add: Dongtaihu Road Puzhuang Town,Wuzhong District,Suzhou 155,China Tel: 5151 Fax: 515599 Mail: nihp@lete.szbnet.com SUZHOU LETE VALVE CO.,LTD. TABLE OF CONTENTS Introduction...1
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationItem 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
More informationCatalogue 6 STAUFF Valves
Two-Way Ball Valves Multi-Way Ball Valves Flow Control and Check Valves Gauge Isolator Valves Catalogue 6 STAUFF Valves Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl Tel.: +49
More informationAN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
More informationVPN1-06. Functional Description HA /2008. Pilot Operated Pressure Relief Valves. Replaces HA /2002
Pilot Operated Pressure Relief Valves VPN-06 HA 56 4/2008 Size 06 p max up to 320 bar Q max up to 70 L/min Replaces HA 56 3/2002 Cartridge, modular and in-line design Five pressure ranges Two pressure
More information05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
More informationV Series Manifold Valves with Collective Wiring Size 1. V Series Size 1 Pneumatic Connectors. Moduflex Valve System V Series Manifold Valves Size 1
Ordering Guide V Series Manifold Valves with ollective Wiring Size V Series Manifold Valves Size V Series Size Pneumatic onnectors PMDYY HMDXX MMDVA Moduflex PVL Size Electro-Pneumatic Manifold Valves,
More informationproduct catalogue Q116 ISO 9001:2008 certified
product catalogue Q116 ISO 9001:2008 certified Haelok the company Haelok fittings are considered the only mechanical alternative to welding. Haelok AG, the inventor of one of the world strongest mechanical
More informationHeavy Series Pipe Clamps Clamp Pair Selection
lamp Pair Selection Behringer s clamp halves are available in different materials and incorporate a modular insert by group size. Heavy Series pipe clamps are available in sizes from ¼ in. (6.35mm) through
More informationBehringer Ball Valve Ordering Code
Ball Valve Catalog Behringer Ball Valve Ordering Code 1 Behringer 2-Way Ball Valves Block Body Valves with Threaded Connections Size Range: 1/4-1 Steel Material Delrin Ball Seats (Others available on request)
More informationRosemount 1195 Integral Orifice Primary Element
September 2014 Rosemount DP Flow Rosemount 1195 Integral Orifice Primary Element Rosemount 1195 Integral Orifice Primary Element utilizes a self centering orifice plate design to eliminate installation
More informationVPN2-10/MR. Functional Description HU /2008. Pilot Operated Pressure Relief Valves. Replaces HU /2005
Pilot Operated Pressure Relief Valves VPN2-10/MR Size 3/8 (10)...5076 PSI (350 bar)...40 GPM (150 L/min) 7/2008 Replaces 2/2005 Modular and in-line design Five pressure ranges Two pressure adjustment options:
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationHIGH PRESSURE BALL VALVES
HIGH PRESSURE BALL VALVES HIGH PRESSURE BALL VALVES TABLE OF CONTENTS Page Description 3 Valve Design 3 Product Features 3 Available Options 3 2-Way with NPT and SAE Connections 4 2-Way with SAE Split
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationJIS G (SGP)
JIS G 3452-1988 (SGP) Nominal size Outside Diameter Thickness Unit Weight (plain end) A B mm in mm in lb/ft kg/m 6 1/8 10.5 0.413 2.0 0.079 0.282 0.419 8 1/4 13.8 0.543 2.3 0.090 0.438 0.652 10 3/8 17.3
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationNorth American Miscellaneous Connectors
Combustion North American Miscellaneous Connectors 8775 Quick Disconnects for Oil, Compressed Air, and Natural Gas Bulletin 8770 FEATURES The 8775 couplings allow you to couple and uncouple your hoses
More informationPRO-II SERIES SAND MEDIA FILTRATION SYSTEMS Kits and Parts Listing
PRO-II SERIES SAND MEDIA FILTRATION SYSTEMS Kits and Parts Listing TABLE OF CONTENTS Assembling Components...page 8" Tanks & Tank Kits... " & " Dia. Tank & Tank Kits... Manifold Kits 6", 8" & 0"... 5-5
More informationF L O W M E T E R I N G E Q U I P M E N T Model AR Ellipse Annular Flow Meter Preso s patented elliptical design outperforms and provides greater accuracy than traditional differential pressure flow measurement
More informationGS-37 FLARE FLANGE SYSTEM
FLARING AND INSTALLATION INSTRUCTIONS GS-37 FLARE FLANGE SYSTEM REVISION FEBRUARY 2016 GS-37 GS-37 FLARE FLANGE SYSTEM Flaring and Installation Instructions Table of contents Introduction 3 GS-37 Connection
More informationUNITED BRAND FITTINGS
UNITED BRAND FITTINGS ANSI B. Class 5 ( ~ ) AWWA C Class 0 (3 ~ ) Our dedication to the mechanical piping industry has given us the opportunity to provide you with a quality comprehensive line of flanged
More informationForged Fittings. High Technology Valve & Fitting Series
Forged Fittings High Technology Valve & Fitting Series Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications
More informationA Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED. Gate, Globe & Check Valves.
A Long Experience in Energy Equipment and one Goal: The Customer s satisfaction. FORGED Gate, Globe & Check Valves. VALVITALIA VITAS DIVISION PLANT Some production example of Forged Steel Valves 2 Valves
More informationMETAL TO METAL BALL VALVES CATALOGUE
METAL TO METAL BALL VALVES CATALOGUE INDEX JC-TL IN THE WORLD FLOATING AND SEMI TRUNNION BALL VALVES - FIG. 515/530 - ASME-EN-STANDARD. TRUNNION FORGED BALL VALVES - FIG. 6015/6030 - ASME-API-EN STANDARD.
More informationKF Series FA Ball Valves
KF Series FA all Valves Superior Fluid ontrol Products for the Petrochemical and Industrial Markets Series FA all Valves This high quality two-piece split body trunnion mounted ball valve conforms to API
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationVariable displacement axial piston pumps
Variable displacement axial piston pumps SVP series GENERAL INFORMATIONS Variable displacement axial piston pump swash plate design for open circuit-flow sharing control valve. The pump has been designed
More informationUltra Proline. ECTFE (Halar ) Single Wall Piping System
ECTFE ( ) Single Wall Piping System 222 - Specification Natural Ethylene Chlorotrifluoroethylene (ECTFE) Chemical Piping System REV:IN0512HA Materials: ASTM D3275 Class 2 resin. Raw resins are certified
More informationUNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL
UNITS 1-3 EAGLE WORKS 2 SPRINGCROFT ROAD TYSELEY BIRMINGHAM B11 3EL TEL: 0121 778 6001 FAX: 0121 778 6002 EMAIL: sales@astonfittings.com WEBSITE: www.astonfittings.com QUALITY POLICY The directors of Aston
More informationAvailable manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationSTAINLESS STEEL FITTINGS AND VALVES
STAINLESS STEEL FITTINGS AND VALVES RHEINMAIN FITTINGS STAINLESS STEEL SCREWED FITTINGS EG 23 A / G-33 Weld nipple /8" 6", thread EN 0226, ISO 7- Standard and special length Material 36/304 36Ti/32 EG
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationTri-Clamp ferrules & blanks
Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM
More informationIndustrial Valves Check Valve ZW RV / ZW RP - Modular
HYDAC Fluidtechnik: Industrial Valves Check Valve ZW RV / ZW RP - Modular D E 2.902.0/08.09 X.XXX.0/01.09 E 5.101.0/ 08.09 1 Check valve as sandwich plate housing ZW-RV06 Up to 350 bar Up to 50 l/min Symbols
More informationACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES
ACCESSORIES & FITTINGS 800 SERIES CONTROL VALVES 8 VALVE FITTING PART NUMBERS 2" & 3" PRESSURE REDUCING VALVES* 10645 8970-002 (9526-006) 1/4" tube (9526-006) Flow 8970-001 (9526-001) 8970-010 (9526-010)
More informationMasoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Pressure Regulators Steam, Gas or Liquid Service Models 525 and 526 Pressure Reducing, Back Pressure and Differential Pressure Control 2 GE Oil
More informationDRAWING INDEX 1 07/01/2013. Company Project Project Number Location Revision Date
DRAWING INDEX Company Project Project Number Location Revision Date LEGACY OIL & GAS INC. PIERSON PILINE TO EOG 12069 VARIOUS LSD ISSUED FOR APPROVAL January 4, 2013 Drawing No. Client No. Description
More informationForged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23
Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar
More informationVariable displacement axial piston pumps,
ariable displacement axial piston pumps, for open circuit DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) MAX SPEED 3000 min -1 PRESSURE Max. continuous Max. intermittent
More informationType B (Extruded Branch) Sizes 4 through 30
STOPPLE Fittings & Reduced Branch Split Tees, Sizes 4-inch and Larger Bulletin No: 1100.001.05 Date: July 2008 Cross Indexing No: n/a Supersedes: 1100.001.04 (07/06) Typical Tapping Setup For Plugging
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More information45 Special Retaining Ring Pliers (shafts) 46 External Circlip Pliers for fitting Grip Rings (shafts) G G2
45 Special Retaining Ring Pliers (shafts) 45 10 170 3.6 mm 45 21 200 2.2 mm Model 45 10 170: for retaining rings with a minimum ring split gap of 3.6 mm Model 45 21 200: angled jaws with centering hole
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More information6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationGeneral Service Gaskets and Specialty Gaskets
General Service Gaskets and Specialty Gaskets Universal FPM Gasket...2-1 Universal EPDM Gasket...2-2 EPDM Socket Fusion Ring Gasket...2-3 EPDM Fiberglass Reinforced Plastic Ducting Gasket...2-4 Gasket
More informationCombination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
More informationMANUFACTURING SPECIFICATION
Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationAccutubes. Accuracy True double averaging design +1% of rate accuracy +0.1% repeatability Tested and certified by independent flow labs
s Meriam s Flow Sensors are lab-tested and field-proven flow elements perfect for gas, liquid or steam service. With thousands in use worldwide, the continues to be the right choice when ease of installation,
More informationPIPES, PIPE FITTINGS VALVES & FLANGES
PIPES, PIPE FITTINGS VALVES & FLANGES 2 About the Company Atlas Commercial Company (Kwt.) W.L.L was established in 1962, and is part of the Boodai group of companies. Atlas is one of the oldest companies
More informationEAN PUMP SERIES DL200/DL230
A Met-Pro Fluid Handling Technologies Business Combining the Resources of Dean Pump, Fybroc & Sethco DEAN PUMP SERIES DL200/DL230 Inline Centrifugal Process Pumps D A T A P A K Section DL200/DL230 SERIES
More informationVPP2-04. Functional Description HA /2003. Directly operated pressure relief valves. Replaces HA /2002
Directly operated pressure relief valves VPP-04 HA 5093 /003 Size 04, 06 p max up to 30 bar Q max up to 40 L/min Replaces HA 5093 3/00 Screw-in cartridge, modular and in-line design Six pressure ranges
More informationEngineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
More informationproduct catalogue Q215 ISO 9001:2008 certified
product catalogue Q215 ISO 9001:2008 certified Haelok the company Haelok Inc, the inventor of one of the world strongest mechanical pipe connection, is a Zurich, Switzerland based privately held company,
More informationFLANGES & GASKETS. ITEM No. QTY. DESCRIPTION SIZE MATERIAL MASS (kg) 1 1 FLANGE RFWN - DN # Sch 80 DN100mm 300# Sch 80 A
FLANGES & GASKETS Most of the flanges have intelligent custom properties built into their design tables (making extensive use of the concatenate function) to populate your Bills of Materials (example below).
More information30E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design
3E1: ASME lass 3 - Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description 2 Piece ASME 3 Stainless Steel Ball Valve
More informationVJO1-06/S. Functional Description HA /2010. Check Valves. Replaces HA /2008. Size to 06 (1/4) bar (4600 PSI)...20 L/min (5.
Check Valves VJO1-06/S Size to 06 (1/4)...320 bar (4600 PSI)...20 L/min (5.3 GPM) HA 5004 11/2010 Replaces HA 5004 4/2008 Small dimensions Two models Poppet design Leak-free closure in one direction VJO1-06/Sx-1
More informationGWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE QUALITY VALVE PRODUCTS: BALL CAST STEEL FORGED STEEL BUTTERFLY PLUG WAFER CHECK NEEDLE & GAUGE F L O A T I N G B A L L
More information