VPP2-04. Functional Description HA /2003. Directly operated pressure relief valves. Replaces HA /2002
|
|
- Lenard Kelley
- 5 years ago
- Views:
Transcription
1 Directly operated pressure relief valves VPP-04 HA 5093 /003 Size 04, 06 p max up to 30 bar Q max up to 40 L/min Replaces HA /00 Screw-in cartridge, modular and in-line design Six pressure ranges Pressure adjustment option: - screw with internal hexagon Functional Description Pressure relief valves VPP-04 were designed for applications requiring a safely valve or a pressure regulating valve working over a wide range of pressures and flow rates. The valve basically consists of the valve body (), poppet with damping spool () and compression spring (3). The spring pushes the poppet onto the seat (5) holding the valve in its normally closed position. When the force, caused by the pressure acting on the exposed surface area of the poppet, exceeds the spring force, the valve opens and and the flow passes from port P to port T. To optimize the valve performance, six pressure ranges are available. Choosing the closest range is recommended. The design enables the valve to be used as a screw-in cartridge for manifold mounting, or in a subplate and/or in-line mounted housing. The valve body and the adjustment screw are zinc coated. With models M and R the valve bodies are phosphate coated.
2 HA 5093 Ordering Code VPP-04/ - Directly operated pressure relief valve Model screw in cartridge modular valve, connection A-T modular valve, connection B-T modular valve, connection P-T modular valve, connection A-BandB-A modular valve, connection A-TandB-T modular valve, connection A-T modular valve, connection B-T modular valve, connection P-T modular valve, connection A-BandB-A modular valve, connection A-TandB-T in-line valve, thread G3/8 - P, P, T in-line valve, thread G/ - P, P, T in-line valve, thread G3/8 - P, T in-line valve, thread G/ - P, T S MA04 MB04 MP04 MC04 MD04 MA06 MB06 MP06 MC06 MD06 RA RA RB RB without designation V Seals NBR Viton Pressure range up to 5 bar 6 up to 63 bar 0 up to 00 bar 6 up to 60 bar 5 up to 50 bar 3 up to 30 bar Functional Symbols FOR PREFERRED TYPES SEE BOLD TYPING IN ORDERING CODE AND TABLE OF PREFERRED TYPES ON PAGE Model MA Model MB Model MP Model MC Model MD Valve side Subplate side Model RA Model RB Ordering Numbers of Sandwich / Valve Bodies (without screw-in cartridge) Valve body for modular valve - NBR Ordering number Valve body for modular valve - Viton Ordering number MA04-VP MA04-VP/V MB04-VP MB04-VP/V MP04-VP MP04-VP/V MC04-VP MC04-VP/V MD04-VP MD04-VP/V Valve body for modular valve - NBR Ordering number Valve body for modular valve - Viton Ordering number MA06-VP MA06-VP/V MB06-VP MB06-VP/V MP06-VP MP06-VP/V MC06-VP MC06-VP/V MD06-VP MD06-VP/V
3 HA 5093 Ordering Numbers of Sandwich / Valve Bodies (without screw-in cartridge) Valve body for in-line valve - NBR Ordering number Valve body for in-line valve - Viton Ordering number RA-06-VP RA-06-VP/V RA-06-VP RA-06-VP/V RB-06-VP RB-06-VP/V RB-06-VP RB-06-VP/V Technical Data for Model S Nominal size mm 04 Max. flow rate L/min 40 Max. input pressure (ports P, A, B) bar Max. output pressure (port T) bar 30 Working pressure related to flow bar see p-q characteristics Hydraulic fluid Fluid temperature range for standard sealing (NBR) Fluid temperature range for Viton sealing (FPM) Hydraulic oils of power classes HM, HV to CETOP - RP 9H in viscosity classes ISO VG 3, 46 and 68. C C Viscosity range mm /s Max. degree of fluid contamination Class /8/5 according to ISO 4406 (999). Weight kg 0.7 Mounting position Weight - models MA04, MB04, MP04 - models MC04, MD04 - models MA06, MB06, MP06 - models MC06, MD06 - models RA, RA, RB, RB kg optional p-q Characteristics for Model S Measured at n= 35mm /s and t = 40 C Pressure range 30 Pressure p in bar Pressure range 50 Pressure range 60 Pressure range 00 Pressure range 63 Pressure range 5 Min. pressure setting Limit of valve use (Dp =0%) Flow Q in L/min 3
4 HA 5093 p-q Characteristics, min. pressure setting Measured at n =35mm /s and t = 40 C Dp, p Emin in bar Dp, p Emin in bar Flow Q in L/min - MA04, MB04, MP04, MD04 - MC04 Flow Q in L/min - MA06, MB06, MP06, MD06 - MC06 Valve Dimensions Model S Dimensions in millimetres Type designation Mounting cavity Adjustment element (screw with internal hexagon 6 mm) - clockwise rotation - pressure increase - anticlockwise rotation - pressure decrease Locknut hex. 4 mm 3 Wrench flats s = 7 mm-tightening torque 30 Nm 4 O-ring 9.4 x.(pc.), supplied with valve 5 Combined sealing: O-ring 4 x.78 ( pc.) Back-up ring BBP80B05-N9 = 4.73 x 7.43 x.4 ( pc.) supplied with valve 4
5 Valve Dimensions Dimensions in millimetres HA 5093 Size 04 (Installation dimensions to ISO 440, CETOP - RP H) Model MA 4 3 Name plate Adjustment element for pressure setting 3 4 through mounting holes 4 Square rings 7.65 x.68 (4 pcs.) supplied with valve Required surface finish of interface Models MB, MP 4 3 5
6 HA 5093 Valve Dimensions Dimensions in millimetres Models MC, MD Name plate Adjustment element for pressure setting 3 4 through mounting holes 4 Square rings 7.65 x.68 (4 pcs.) supplied with valve 4 3 Valve Dimensions Dimensions in millimetres Size 06 (Installation dimensions to ISO 440, DIN 4 340) Model MA Name plate Adjustment element for pressure setting 3 4 through mounting holes 4 Square rings 9.5 x.68 (4 pcs.) supplied with valve 4 Required surface finish of interface 3 6
7 Valve Dimensions Models MB, MP Dimensions in millimetres HA 5093 Name plate Adjustment element for pressure setting 3 4 through mounting holes 4 Square rings 9.5 x.68 (4 pcs.) supplied with valve 4 Models MC, MD 3 4 Required surface finish of interface 3 7
8 HA 5093 Valve Dimensions Dimensions in millimetres Model RA Name plate through mounting holes Model RA Name plate through mounting holes 8
9 Valve Dimensions Model RB Dimensions in millimetres HA 5093 Name plate through mounting holes Model RB Name plate through mounting holes 9
10 HA 5093 Spare Parts Seal kit for modular valve Seal kit for screw-in cartridge Model Dimensions, quantity Ordering number Screw-in cartridge - NBR O-ring 4 x.78 NBR 90 ( pc.) O-ring 7 x.8 NBR 70 ( pc.) O-ring 9.4 x.nbr 80 (pc.) Back-up ring BBP80B05-N x 7.43 x.4 ( pc.) Back-up ring BBP80B06-N x 9.03 x.4 ( pc.) O-ring 4 x.78 ( pc.) O-ring 7.7 x.78 ( pc.) Screw-in cartridge - Viton O-ring 9.4 x.(pc.) Back-up ring BBP80B x 7.43 x.4 ( pc.) Back-up ring BG30074-PT x.3 ( pc.) Model Dimensions, quantity Ordering number Modular valve size 04 - NBR Square ring 7.65 x.68 (4 pcs.) Modular valve size 04 - Viton O-ring 7.65 x.78 (4 pcs.) Modular valve size 06 - NBR Square ring 9.5 x.68 (4 pcs.) Modular valve size 06 - Viton O-ring 9.5 x.78 (4 pcs.) Model Typ, quantity Ordering number In-line valve RA- NBR In-line valve RA - NBR In-line valve RB- NBR In-line valve RB - NBR In-line valve RA- Viton In-line valve RA - Viton In-line valve RB- Viton In-line valve RB - Viton VSTI R/4-ED ( pc.) VSTI R3/8-ED (pc.) VSTI R/4-ED ( pc.) VSTI R/-ED ( pc.) VSTI R/4-ED ( pc.) VSTI R/4-ED - Viton ( pc.) VSTI R3/8-ED - Viton (pc.) VSTI R/4-ED - Viton ( pc.) VSTI R/-ED - Viton ( pc.) VSTI R/4-ED - Viton ( pc.)
11 Preferred Types of Valves Type Ordering Number Type Ordering Number VPP-04/S VPP-04/MP VPP-04/S VPP-04/MP VPP-04/S VPP-04/MP VPP-04/MP VPP-04/RA VPP-04/MP VPP-04/RA VPP-04/MP VPP-04/RA HA 5093
12 HA 5093 Caution! Ÿ Ÿ Ÿ Ÿ The packing foil is recyclable. The protecting plate can be returned to the manufacturer. Mounting studs must be ordered separately. Tightening torques are: size 04-5 Nm, size Nm. The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should not be construed in any case as a guaranteed representation of the product properties in the sense of the law. ARGO-HYTOS a. s. CZ Vrchlabí Tel.: , Fax: sales.cz@argo-hytos.com Subject to alteration without notice!
13 Pilot operated pressure relief valve VPN-06 HA 56 /003 Size 06 p max up to 30 bar Q max up to 70 L/min Replaces HA 56 3/00 Cartridge, modular and in-line design Five pressure ranges Two pressure adjustment options: - screw with internal hexagon - hand knob with arrestment Functional Description Pressure relief valves VPN are pilot operated pressure valves designed for system pressure limitation. The pressure adjustment provides the adjustment screw (4). In its basic state, the valve is closed. The pressure acts on the face area of the control spool () and at the same time through orifice () on the control spool rear side, which is preloaded by a spring and further on through orifice (3) on the pilot valve ball (6). When the increasing system pressure reaches the value, which is preset by spring (5), the valve opens and the control flow passes through the pilot valves. The spool area which is preloaded by the spring becomes relieved, the spool control edge opens the radial bores in bushing (7) and the fluid passes from port P to T.The control flow is routed through groove (8) to channel T. Valve adjustment can be lockwired (9). The valve body and the adjustment screw are zinc coated. With models M and R the valve bodies are phosphate coated. P T
14 HA 56 Ordering Code VPN-06/ - Pilot operated pressure relief valve Nominal size without designation V Sealing NBR FPM (Viton) Model screw in cartridge modular valve, flow from A to T modular valve, flow from B to T modular valve, flow from P to T modular valve, flow from A to B and B to A modular valve, flow from A and B to T in-line valve, thread G3/8 in-line valve, thread G/ in-line valve, thread G3/8 in-line valve, thread G/ S MA MB MP MC MD RA RA RB RB S R Adjustment element screw with internal hexagon hand knob Pressure range 6 up to 63 bar 0 up to 00 bar 6 up to 60 bar up to 0 bar 3 up to 30 bar Functional Symbols FOR PREFERRED TYPES SEE BOLD TYPING IN ORDERING CODE AND TABLE OF PREFERRED TYPES ON PAGE 0 Model MA Model MB Model MP Model MC Model MD Valve side Subplate side Model RA Model RB Ordering Numbers of Sandwich / Valve Bodies (without screw-in cartridge) Valve body for modular valve - NBR Ordering number Valve body for modular valve - Viton Ordering number MA06-VP MA06-VP/V MB06-VP MB06-VP/V MP06-VP MP06-VP/V MC06-VP MC06-VP/V MD06-VP MD06-VP/V Valve body for in-line valve - NBR Ordering number Valve body for in-line valve - Viton Ordering number RA-06-VP RA-06-VP/V RA-06-VP RA-06-VP/V RB-06-VP RB-06-VP/V RB-06-VP RB-06-VP/V
15 Technical Data Nominal size mm 06 Max. flow rate L/min 70 Max. control flow L/min 0.35 Max. input pressure (ports P, A, B) bar 63; 00; 60; 0; 30 Max. output pressure (port T) bar 30 Working pressure related to flow bar see p-q characteristics Hydraulic fluid HA 56 Hydraulic oils of power classes HM, HV to CETOP-RP 9H in viscosity classes ISO VG 3, 46 and 68. Fluid temperature range for standard sealing (NBR) C Fluid temperature range for Viton sealing (FPM) C Viscosity range mm /s Max. degree of fluid contamination Class /8/5 according to ISO 4406 (999). Weight - model S - models MA, MB, MP - models MC, MD - models RA, RA, RB, RB Mounting position kg optional p-q Characteristics for Model S Measured at n= 35 mm /s and t = 40 C pressure range 3 Pressure p in bar pressure range pressure range 6 pressure range 0 pressure range 6 Flow Q in L/min p-q Characteristics Measured at n= 35 mm /s and t = 40 C MC Dp, p Emin in bar MA, MB, MP, MD S Flow Q in L/min 3
16 HA 56 Valve Dimensions Dimensions in millimetres Model S Mounting cavity Type designation Adjustment element (screw with internal hexagon 6 mm) Adjustment element R (hand knob) With all adjustment elements: - clockwise rotation - pressure increase - anticlockwise rotation - pressure decrease 3 Locknut hex. 7 mm 4 Wrench flats s = 4 mm - tightening torque 60 Nm 5 O-ring 9.4 x. NBR 80 ( pc.) supplied with valve 6 Combined sealing: O-ring 4 x.78 NBR 90 ( pc.) Back-up ring BBP80B05-N x 7.43 x.4 ( pcs.) supplied with valve 4
17 Valve Dimensions Dimensions in millimetres HA 56 Model MA 3 4 Required surfacefinish of interface Name plate Adjustment elements for pressure setting 3 4 through mounting holes 4 Square rings 9.5 x.68 (4 pcs.) supplied with valve 5
18 HA 56 Valve Dimensions Dimensions in millimetres Models MB and MP 3 4 Required surfacefinish of interface Name plate Adjustment elements for pressure setting 3 4 through mounting holes 4 Square rings 9.5 x.68 (4 pcs.) supplied with valve 6
19 Valve Dimensions Models MC and MD Dimensions in milimetres HA Required surfacefinish of interface Name plate Adjustment elements for pressure setting 3 4 through mounting holes 4 Square rings 9.5 x.68 (4 pcs.) supplied with valve Caution! Ÿ Ÿ Ÿ Ÿ The packing foil is recyclable. The protecting plate can be returned to the manufacturer. Mounting studs must be ordered separately. Tightening torque is 8.9 Nm. The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should not be construed in any case as a guaranteed representation of the product properties in the sense of the law 7
20 HA 56 Valve Dimensions Dimensions in millimetres Model RA Name plate through mounting holes Model RA Name plate through mounting holes 8
21 Valve Dimensions Dimensions in milimetres HA 56 Model RB Name plate through mounting holes Model RB Name plate through mounting holes 9
22 HA 56 Spare Parts Set of the seals for modular valve Set of the seals for screw-in cartridge Model Dimensions, number Ordering number Screw-in cartridge - NBR O-ring 4 x.78 NBR 90 ( pc.) O-ring 7 x.8 NBR 70 ( pc.) O-ring 9.4 x. NBR 80 ( pc.) O-ring 9.5 x.78 NBR 90 ( pc.) Back-up ring BBP80B05-N x 7.43 x.4 ( pc.) Back-up ring BBP80B06-N x 9.03 x.4 ( pc.) O-ring 4 x.78 ( pc.) O-ring 7 x.8 ( pc.) Screw-in cartridge - Viton O-ring 9.4 x. ( pc.) O-ring 9.5 x.78 ( pc.) Back-up ring BBP80B x 7.43 x.4 ( pc.) Back-up ring BBP80B x 9.03 x.4 ( pc.) Model Dimensions, number Ordering number Modular valve - NBR Square ring 9.5 x.68 (4 pcs.) Modular valve - Viton O-ring 9.5 x.78 (4 pcs.) Model Typ, number Ordering number In-line valve RA - NBR In-line valve RA - NBR In-line valve RB - NBR In-line valve RB - NBR In-line valve RA - Viton In-line valve RA - Viton In-line valve RB - Viton In-line valve RB - Viton Preferred Types of Valves VSTI R/4-ED ( pc.) VSTI R3/8-ED ( pc.) VSTI R/4-ED ( pc.) VSTI R/-ED ( pc.) VSTI R/4-ED ( pc.) VSTI R/4-ED - Viton ( pc.) VSTI R3/8-ED - Viton ( pc.) VSTI R/4-ED - Viton ( pc.) VSTI R/-ED - Viton ( pc.) VSTI R/4-ED - Viton ( pc.) Type Ordering number Type Ordering number VPN-06/S-0S VPN-06/MP-3S VPN-06/S-S VPN-06/RA-0S VPN-06/S-3S VPN-06/RA-S VPN-06/MP-0S VPN-06/RA-3S VPN-06/MP-S ARGO-HYTOS a. s. CZ Vrchlabí Tel.: , Fax: sales.cz@argo-hytos.com Subject to alteration without notice!
23 Pilot operated pressure relief valve VPN-0/MR HA 564 /005 Size PSI(350 bar) US GPM (50 L/min) Replaces HA 564 /003 TA A P B TB Modular and in-line design Five pressure ranges TA A P B TB Two pressure adjustment options: - screw with internal hexagon - hand knob with arrestment Installation dimensions to ISO 440 and DIN A0 Functional Description Pressure relief valves VPN are pilot operated pressure valves designed for system pressure limitation. The pressure adjustment is controled by the adjustment screw (4). In its basic state, the valve is closed. The pressure acts on the face area of the control spool () and at the same time through orifice () on the control spool rear side, which is preloaded by a spring and further on through orifice (3) on the pilot valve ball (6). When the increasing system pressure reaches the value, which is preset by spring (5), the valve opens and the control flow passes through the pilot valve. The spool area which is preloaded by spring becomes relieved, the spool control edge opens the radial bores in bushing (7) and the fluid passes from port B to T. The control flow is routed through slot (8) to port T. When an accurate pressure control, which does not depend on pressure variations in port T (only for models RC and RC3, see Functional Symbols), is required the model "Y" with external port for pilot flow is to be used. If a relieving of the valve on a lower pressure as that set up by the spring (5) is needed, the model with port "X" (0) is to be used. The valve body and the adjustment screw are zinc coated. With models M and R the valve bodies are phosphate coated.
24 HA 564 Ordering Code VPN-0/ - Pilot operated pressure relief valve without designation V Seals NBR FPM (Viton) Nominal size 0 S R Adjustment element screw with internal hexagon hand knob Model modular valve, flow from A to TA modular valve, flow from B to TB modular valve, flow from P to TA modular valve, flow from A to B and B to A modular valve, flow from A to TA and B to TB in-line valve, thread P, P - G3/4; T-G in-line valve, thread P - G3/4; T-G in-line valve, thread P - G3/4; T - G; X - G/4 in-line valve, thread P - G3/4; T - G; Y - G/4 MA MB MP MC MD RA RB RC RC3 Pressure range 6 up to 93 PSI(63 bar) 0 up to 450 PSI(00 bar) 6 up to 3 PSI(60 bar) up to 3045 PSI(0 bar) 3 up to 5076 PSI(350 bar) Model with two pressure relief cartridges 3/0 pressure setting 5076 PSI(350 bar) in port A and 450 PSI(00 bar) in port B, etc. Functional Symbols FOR PREFERRED TYPES SEE BOLD TYPING IN ORDERING CODE AND TABLE OF PREFERRED TYPES ON PAGE 7 Model MA Model MB Model MP Model MC Model MD Model RA Model RB Model RC Model RC3 Valve side Subplate side Ordering Numbers of Sandwich / Valve Bodies (without screw-in cartridge) Valve body for modular valve - NBR Ordering number Valve body for modular valve - Viton Ordering number MA0-VP MA0-VP/V MB0-VP MB0-VP/V MP0-VP MP0-VP/V MC0-VP MC0-VP/V MD0-VP MD0-VP/V Valve body for in-line valve - NBR Ordering number Valve body for in-line valve - Viton Ordering number RA-0-VP RA-0-VP/V RB-0-VP RB-0-VP/V RC-0-VP (RC3-0-VP) RC-0-VP/V (RC3-0-VP/V)
25 Technical Data HA 564 Nominal size mm 0 Max. flow rate US GPM (L/min) (50) Max. control flow US GPM (L/min) 0.3 (0.5) Max. input pressure (ports P, A, B) PSI(bar) 93 (63); 450 (00); 3 (60); 3045 (0); 5076 (350) Max. output pressure (port T) PSI(bar) 5076 (350) Working pressure related to flow PSI(bar) see p-q characteristics Hydraulic fluid Hydraulic oils of power classes HM, HV to CETOP-RP 9H in viscosity classes ISO VG 3, 46 and 68. Fluid temperature range for standard sealing (NBR) F ( C) ( ) Fluid temperature range for Viton sealing (FPM) F ( C) ( ) Viscosity range SUS (mm /s) ( ) Max. degree of fluid contamination Class /8/5 according to ISO 4406 (999). Weight - models MA, MB, MP - models MC, MD - models RA, RB, RC, RC3 Mounting position p-q Characteristics lbs (kg) 5.74 (.6) (3.0) (.7) optional Measured at n= 66 SUS (35 mm /s) and t = 04 F (40 C) Pressure setting p in PSI(bar) pressure range 3 pressure range pressure range 6 pressure range 0 pressure range 6 Flow Q in US GPM (L/min) p-q Characteristics Measured at n= 66 SUS (35 mm /s) and t = 04 F (40 C) Dp, p Emin in PSI(bar) MC MP MA, MB Flow Q in US GPM (L/min) 3
26 HA 564 Valve Dimensions Dimensions in inches and millimetres (in brackets) Model MA Name plate Adjustment elements for pressure setting 3 4 through mounting holes 4 Square rings.4 x.68 (5 pcs.) supplied with each valve 3 4 Model MB 3 Required surface finish of interface 4 4
27 Valve Dimensions Model MP Dimensions in inches and millimetres (in brackets) HA 564 Name plate Adjustment elements for pressure setting 3 4 through mounting holes 4 Square rings.4 x.68 (5 pcs.) supplied with each valve 3 4 Models MC, MD Required surface finish of interface 3 4 5
28 HA 564 Valve Dimensions Model RA Dimensions in inches and millimetres (in brackets) 3 Name plate through mounting holes 3 x M6 for attachment under panel Model RB 3 Name plate through mounting holes 3 x M6 for attachment under panel 6
29 Valve Dimensions Model RC, RC3 Dimensions in inches and millimetres (in brackets) HA Name plate through mounting holes 3 x M6 for attachment under panel Spare Parts Model Dimensions, number Ordering number Modular valve - NBR Square ring.4 x.68 NBR 90 (5 pcs.) Modular valve - Viton O-ring.4 x.78 (5 pcs.) Model Typ, number Ordering number In-line valve RA - NBR In-line valve RB, RC, RC3 - NBR In-line valve RA - Viton In-line valve RB, RC, RC3 - Viton VSTIR/4-ED ( pc.) VSTIR3/4-ED ( pc.) VSTIR/4-ED ( pc.) VSTIR/4-ED - Viton ( pc.) VSTIR3/4-ED - Viton ( pc.) VSTIR/4-ED - Viton ( pc.) Preferred Types of Valves Type Ordering number Type Ordering number VPN-0/MP-0S VPN-0/RA-0S VPN-0/MP-S VPN-0/RA-S VPN-0/MP-3S VPN-0/RA-3S
30 HA 564 Caution! Ÿ Ÿ The packing foil is recyclable. The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should not be construed in any case as a guaranteed representation of the product properties in the sense of the law. 8 ARGO-HYTOS a. s. CZ Vrchlabí Tel.: , Fax: sales.cz@argo-hytos.com Subject to alteration without notice!
31 Directly operated pressure reducing valves VRP-04 HA 54 5/005 Size PSI (30 bar) US GPM (0 L/min) Replaces HA 54 6/003 For stacking assemblies 4 pressure ranges Pressure reduction in ports A or P Model A with check valve Installation dimensions to ISO440/CETOP-RP H Functional Description The pressure valves VRP are directly operated reducing valves for vertical stacking assemblies designed as 3-way valves, i.e. with pressure protection of the secondary circuit. The valve consists of the valve body (), control spool (), spring (3), adjustment element (4) and the plug G /4 (5) for pressure measuring and, if necessary, of a check valve. Model A With this model, the fluid enters into the valve body from the primary circuit through port A and passes through the metering edge, where its pressure is reduced.the reduced pressure corresponds with the setting of the control spring.at the same time, this pressure affects also the surface area of the control spool opposed to the spring (the pressure can be measured at the port G /4 which is normally closed by plug 5).Thus the static balance of the spool is ensured.if the reduced pressure changes, a respective control action takes place and the reduced pressure returns to its preset value.the flow from the output port A passes then to the user.if pressure behind the valve increases due to the effect of the load acting on the user, the spool shifts further against the spring until the second metering edge opens and the excessive flow drains through port T.The leakage from the spring room is also routed to port T. The reverse free-flow from port A to port A passes through a check valve which is connected parallel to the metering edge. Model B With model B, the pressure reduction follows from port P to port P, but it takes place only when the flow in port B passes in the direction to the user (not opposite).the protection of the secondary circuit is also ensured for one flow direction only. Model P With model P, the pressure reduction follows from port P to port P, but is effective in both flow directions through the directional valve (as well as the protection of the secondary circuit). The valves are delivered with basic surface treatment. The valve body is phosphate coated, whereas the surfaces of the other parts are zinc coated. A B A B
32 HA 54 Ordering Code VRP-04- / Reducing valve, directly operated Nominal size 6 6 Pressure range Adjustable up to 363 PSI (5 bar) Adjustable up to 94 PSI (63 bar) Adjustable up to 3 PSI (60 bar) Adjustable up to 3046 PSI (0 bar) Pressure reduction Pressure control In port A from port A A In port P from port B B In port P from port P P S Adjustment element Screw with outside hexagon 4 mm FOR PREFERRED TYPES SEE BOLD TYPING IN ORDERING CODE AND TABLE OF PREFERRED TYPES ON PAGE 3 Functional Symbols VRP -04-A./.. VRP -04-B./.. VRP -04-P./.. Technical Data Nominal size mm 04 Maximal flow US GPM (L/min) 5.3 (0) Max.imput pressure PSI (bar) (30) Reduced pressure PSI (bar) 363 (5) Hydraulic fluid 94 (63) 3 (60) 3046 (0) Hydraulic oils of power classes HM, HV to CETOP RP 9 H in viscosity classes ISO VG 3, 46 and 68 Fluid temperature range F ( C) ( ) Viscosity range SUS (mm /s) ( ) Maximum degree of fluid contamination Class /8/5 to ISO 4406 (999). Weight - model A model B, P Mounting position lb (kg).8 (0.8).3 (0.60) optional
33 p-q Characteristics Measured at = 66 SUS (35 mm /s) and t = 04 F (40 C) HA 54 Safety pressure in PSI (bar) 3046 (0) 3 (60) 94 (63) 363 (5) Reduced pressure in PSI (bar) Flow in US GPM (L/min) p-q Characteristics 3 Model A Models P und B Pressure drop in PSI (bar) Model A Models P und B Model A Flow in US GPM (L/min) Preferred Types of Valves Caution! Type Ordering number VRP-04-PS/ VRP-04-PS/ VRP-04-PS/ The packing foil is recyclable. If the valve is used separately without a directional valve, a cover plate DK-04/3-3 with the same installation dimensions can be ordered. This plate connect port A with port P - see catalogue Adapter and Blanking Plates HA Mounting bolts M5x50 or studs must be ordered separately. Tightening torque of the screws is 3.7 ft-lbs (5 Nm). For applications outside these parameters, please consult the manufacturer. The technical information regarding the product presented in this catalogue is for descriptive purposes only. It should not be construed in any case as a guaranteed representation of the product properties in the sense of the law. 3
34 HA 54 Valve Dimensions Dimensions in inches and millimetres (in brackets) Model A Type VRP-04-AS/ Model B and P Type VRP-04-B(P)S/.. Name plate Pressure adjustment element S - screw with outside hex.s=4 mm 3 Plug for pressure gauge connection, thread G /4 4 Locknut 5 4 through mounting holes 6 SQUARE RING 7.65x.68 (4 pcs.), supplied with each valve Required surface finish of interface. ARGO-HYTOS a.s. CZ Vrchlabí Tel.: , Fax: sales.cz@argo-hytos.com 4 Subject to alteration without notice!
VPN1-06. Functional Description HA /2008. Pilot Operated Pressure Relief Valves. Replaces HA /2002
Pilot Operated Pressure Relief Valves VPN-06 HA 56 4/2008 Size 06 p max up to 320 bar Q max up to 70 L/min Replaces HA 56 3/2002 Cartridge, modular and in-line design Five pressure ranges Two pressure
More informationSR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design
Directly Operated Pressure Relief Valves SRA-A2 HA 5063 7/202 3/4-6 UNF p max 350 bar (5080 PSI) Q max 30 L/min (7.9 GPM) Replaces HA 5063 8/200 Screw-in cartridge design 4 pressure ranges Pressure setting
More informationVPN2-10/MR. Functional Description HU /2008. Pilot Operated Pressure Relief Valves. Replaces HU /2005
Pilot Operated Pressure Relief Valves VPN2-10/MR Size 3/8 (10)...5076 PSI (350 bar)...40 GPM (150 L/min) 7/2008 Replaces 2/2005 Modular and in-line design Five pressure ranges Two pressure adjustment options:
More informationVRN2-10. Functional Description HA /2008. Pilot Operated Pressure Reducing Valves. Replaces HA /2003
Pilot Operated Pressure Reducing Valves VRN2-0 HA 554 7/2008 Size 0 p max up to 20 bar Q max up to 50 (80) L/min Replaces HA 554 2/200 Screw-in cartridge valve for manifold mounting and stacking assemblies
More informationVJO1-06/S. Functional Description HA /2010. Check Valves. Replaces HA /2008. Size to 06 (1/4) bar (4600 PSI)...20 L/min (5.
Check Valves VJO1-06/S Size to 06 (1/4)...320 bar (4600 PSI)...20 L/min (5.3 GPM) HA 5004 11/2010 Replaces HA 5004 4/2008 Small dimensions Two models Poppet design Leak-free closure in one direction VJO1-06/Sx-1
More informationVJL Functional Description. Ordering Code VJL Spare Parts HA /2002. Logical 3-way check valves. Replaces HA /2001
Logical 3-way check valves VJL2-304 HA 5007 3/2002 Size 04 p max up to 210 bar Q max up to 15 L/min Replaces HA 5007 6/2001 Screw-in cartridge valve For leak-free applications Simple design High reliability
More informationFunctional Description
4/2 Way Solenoid Operated Directional Control Valves Spool SD2E-A4 Type 3/4-16 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) 01/2005 4/2 Way cartridge valves solenoid operated spool directed Manual
More informationVSK. Functional Description HA /2008. Constant Flow - Control Valves VSK4 VSK2 VSK2 VSK4. Replaces HA /2000
Constant Flow - Control Valves VSK HA 5 5/008 Size 06 p max up to 0 bar Q max up to 0 L/min Replaces HA 5 /000 Wide range of throttling oriffices VSK4 Two models: - cartridge - screw-in cartridge valve
More informationRPE2-04. Functional Description HA /2002. Solenoid Operated Directional Valves. Replaces HA /2000
Solenoid Operated Directional Valves RPE2-04 HA 4012 3/2002 Size 04 p max up to 320 bar Q max up to 20 l/min Replaces HA 4012 6/2000 Special model - special installation dimensions 4/3-, 4/2- and 3/2-way
More informationRPEW4-06. Functional Description HA /2005. Solenoid Operated Directional Control Valves with Wirebox 1/2 NPT 1/2 NPT. Replaces HA /2004
Solenoid Operated Directional Control Valves with Wirebox RPEW4-06 2/2005 Size 06 p max up to 320 bar Q max up to 80 L/min Replaces 2/2004 4/3, 4/2 way directional control valves Four-land spool - reduced
More informationRPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) 10/2010 Replaces 12/2007 4/3-, 4/2- way directional control valves with solenoid control Solenoids
More informationSD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2014. Replaces HA /2013
/ Way Solenoid Operated Directional Control Valves Spool Type SDE- /-6 UNF p max 50 bar (5076 PSI) Q max 0 L/min (7.9 GPM) 07/0 Replaces 0/0 Hardened precision working parts High flow capacity High transmitted
More informationSD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2012. Replaces HA /2010
4/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-4 /4-16 UNF p max 50 bar (5076 PSI) Q max 0 L/min (7.9 GPM) 7/2012 Replaces 10/2010 4/2 way cartridge valves solenoid operated spool
More informationSD3E-B2. Functional Description. 2/2 Way Solenoid Operated Directional Control Valves Poppet Type HA /2012. Replaces HA /2010
/ Way Solenoid Operated Directional Control Valves Poppet Type SD3E-B 7/8-4 UNF p max 40 bar (609 PSI) Q max 75 L/min (9.8 GPM) H 4063 7/0 Replaces H 4063 0/00 / way cartridge valves solenoid operated
More informationSD2E-A3. Functional Description. 3/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2013. Replaces HA /2012
3/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-A3 3/4-6 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) HA 404 /203 Replaces HA 404 07/202 Hardened and precision working parts
More informationRNEH4-25. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2012
4/2 and 4/3 Way Directional Control Valves Pilot Operated RNEH4-25 HA 4024 7/2015 Size 25 (D 08) 320 bar (4600 PSI) 600 L/min (159 GPM) Replaces HA 4024 6/2012 Solenoid pilot operated directional valves
More informationRPE3-04. Functional Description HA /2013. Directional Control Valves Solenoid Operated. Replaces HA /2010
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) HA 4014 09/2013 Replaces HA 4014 10/2010 4/3-, 4/2- way directional control valves with solenoid
More informationRPEH4-16. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2002
4/2 and 4/3 Way Directional Control Valves Pilot Operated RPEH4-16 HA 4023 2/2003 Size 16 p max up to 320 bar Q max up to 300 L/min Replaces HA 4023 2/2002 Solenoid pilot operated directional valves (RPEH)
More informationPRM2-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013. Size 06 p max 350 bar Q max 40 L/min
Proportional Directional Control Valves Size 06 p max 50 bar Q max 40 L/min PRM-06 HA 5104 /014 Replaces HA 5104 /01 Compact design with integrated High reliability Simple replacement of the exciting coils
More informationRPEW4-10. Functional Description HA /2012. Solenoid Operated Directional Control Valves with Wirebox. Replaces HA /2006
Solenoid Operated Directional Control Valves with Wirebox RPEW-10 5/2012 Size 10 (D 05) 350 bar (5076 PSI) 10 L/min (37 GPM ) Replaces 2/2006 /3, /2 way directional control valves Four-land spool - reduced
More informationPRM7-04. Functional Description HA /2012. Proportional Directional Control Valves. Replaces HA /2009
Proportional Directional Control Valves PRM7-6/ Size D () bar (6 PSI) L/min (. GPM ) Replaces /9 Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis
More informationPRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002
Proportional Directional Control Valves PRM7-6 HA 59 /6 Size D (6)...6 PSI ( bar)...6 GPM ( L/min) Replaces HA 57 / Digital control Compact design Operated by proportional solenoids High sensitivity and
More informationFunctional Description HA /2005. Compact power packs SMA 03. Replaces HA /2003. p max up to 200 bar Q max up to 0,5-17 L/min
Compact power packs SMA 03 p max up to 200 bar Q max up to 0,5-17 L/min HA 7203 8/2005 Replaces HA 7203 2/2003 Compact power packs for the use in lifting platforms, elevating tables, ramps, presses, machine
More informationPRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013
Proportional Directional Control Valves PRM7-6 / Size 6 (D ) bar (76 PSI) L/min (.6 GPM) Replaces HA 7 / Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis
More informationHYDRAULIQUE PNEUMATIQUE TOUS COMPOSANTS VENTE - REPARATION DEPANNAGE
HYDRAULIQUE PNEUMATIQUE TOUS COMPOSANTS VENTE - REPARATION DEPANNAGE HYPSO RN 113 BP 10 82700 MONTECH Tél. : 05 63 64 70 71 Fax : 05 63 64 76 56 Web : http://www.hypso.fr Mail : contact@hypso.fr COMPACT
More informationRA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)
R 26 892/06.98 Pressure Reducing Valve, Pilot Operated Model DR (Series 5) Size 10 to 0... 5000 PSI (50 bar)... 105 GPM (400 L/min) R 26 892/06.98 Replaces: 05.94 Pilot operated pressure reducing valve
More informationPressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
More informationPilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
More informationRPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15.
REK-03 Modular Valve ssembly REK-03/ /0 D n 03 p max 50 bar (366 SI) Q max 60 l/min (5.8 GM) Compact modular valve system assembly Easy to build complex circuits he possibility of subsequent rebuilding
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationVALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G
VALVES RANGE FOR OPEN LOOPS T E C H N I C A L C A T A L O G Valves range for open loop 2 18/07/2017 Valves range for open loop CONTENT CHECK VALVES 5 Direct operated valves 7 Pilot operated valves 11 Counterbalance
More informationLOGIC ELEMENTS SERIES 10 LC* LP* /103 ED CARTRIDGE VALVES ISO DIN COVERS FOR CARTRIDGE VALVES ND
48 900/103 ED LC* LP* LOGIC ELEMENTS CARTRIDGE VALVES ISO 7368 - DIN 24342 COVERS FOR CARTRIDGE VALVES ND 16-25-32-40-50 p max 420 bar Q max (see performance ratings table) OPERATING PRINCIPLE Logic elements
More information20 l/min (5 GPM) p max. Technical Features
Proportional Directional Control Valve, with Analogue Control Electronics PRM2-0 Functional Description Size 0 (D02) Q max 20 l/min (5 GPM) p max 320 bar (600 PSI) Technical Features Direct acting, proportional
More information40 l/min (11 GPM) p max
Proportional Directional Control Valve, with Analog Control Electronics PRM2-06 Functional Description Size 06 (D03) Q max 40 l/min (11 GPM) p max 350 bar (5100 PSI) Technical Features Direct acting, proportional
More information06 SERIES MODULAR VALVES. Pub. EC-1404
6 SERIES General Information Mounting Surface : ISO -AE-8--A, CETOP-8, NPA-D6 Up to 5 MPa (363 PSI), 5 L /m in (3 U.S.GPM) Pub. EC- The modular valves are functional elements with which a hydraulic system
More information10 SERIES MODULAR VALVES. Pub. EC-1405
SERIES General Information Mounting Surface : ISO ----, CETOP-, NP-D Up to 5 MPa (363 PSI), 8 L /m in ( U.S.GPM) Pub. EC-5 The modular valves are functional elements with which a hydraulic system can be
More informationRSP 7-06 R S P FUNCTIONAL DESCRIPTION ORDERING CODE. DIRECTIONAL CONTROL VALVES KE /13 D n 06 p max 32 MPa Q max 80 dm 3 /min
DIRECTIONAL CONTROL VALVES KE 2053 07/13 D n 06 p max 32 MPa Q max 80 dm 3 /min Manually operated directional control valves of type RSP7 06 operated by hand lever are used to control start, stop and direction
More informationHigh Pressure, High Flow Rate Modular Valves
High Pressure, High Modular Valves EIC-F-14- MODULR VLVES The modular valves are functional elements with which a hydraulic system can be composed and built easily by stacking them with the mounting bolts.
More informationPilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
More informationSubplates (AP) and multi-station subplates
Subplates and multi-station subplates Type AP700/RP700/ EP700 to 25 l/min Features Subplates (AP) and multi-station subplates (RP) with threaded connections End plate (EP) Compact design up to six stations
More informationProportional Pressure Relief Valve Series RE*T
Characteristics The pressure relief valve series RE*T have a proportional solenoid operated pilot stage with integrated electronics and a cartridge main stage. Features Pilot-operated pressure relief valve
More informationPressure Reducing Valve Direct Operated
0/06 Pressure Reducing Valve Direct Operated 3.8 Type ZDR6D...L4X Size 6 Up to 0 bar Up to L/min Contents Function and configurations 0 Symbols Specification Technical data 04 Unit dimensions 05 Features
More informationDirectional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationPressure reducing valve, pilot operated Type DR
RE 6 9/0.0 Replaces: 0.0 Pressure reducing valve, pilot operated Type DR Nominal sizes 0 to Series Maximum operating pressure 0 bar Maximum flow 00 L/min K660-9 Type DR 0--/... Overview of contents Features
More information4 Flow Control Valves. Notes
Flow Control alves Content Flow Control alves Notes Example Flow l/min (GM) ressure bar (I) Code Cartridge ize ; D ize ; D ize ; D Line Mounted age Data heet Needle - Restrictor alves and alves with Reverse
More informationPressure relief valve, pilot operated
Pressure relief valve, pilot operated RE 576/05. Replaces: 0.03 /0 Type ZDB and ZDB Size 0 Component series 4X Maximum operating pressure 35 bar [4600 psi] Maximum flow 00 l/min [6.4 US gpm] H7747 Table
More informationDL /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 125 l/min
41 330/116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-05 p max 320 bar Q max 125 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-05-04-0-05 (CETOP 4.2-4-05-320)
More informationDENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C 2/2-Way Function / Cavity conform to ISO 7368 (DIN 24342) Publ. 7 EN 5060 A FEATURES, DESCRIPTION FEATURES x High flow cartridges give highest
More informationRE / Check-Q-meter type FD, series 2X. Ordering details FD 2X / V * Symbols 1/8. Replaces: 03.92
RE 1/09.9 1/03.9 Check-Q-meter type FD, series Sizes 1, 1,, 3 Up to 0 L/min Up to 30 bar RE 1/09.9 Replaces: 03.9 Features: For installation in manifolds (cartridge valve), With SE flanged ports, For sub-plate
More informationRS* /110 ED DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30. Q max (see table of performances) THREADED PORTS CARTRIDGE TYPE
31 200/110 ED RS* DOUBLE-ACTING THROTTLE FLOW CONTROL VALVE SERIES 30 THREADED PORTS CARTRIDGE TYPE p max (see table of performances) Q max (see table of performances) OPERATING PRINCIPLE The RS* and RS*-I
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
More informationPilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
More information29 158/ Proportional Pressure Relief Valve Models DBE and ZDBE, Series 1X. Ordering code DBE 6 1X G24 1/ PSI (315 bar)
RA 29 58/6.98 Proportional Pressure Relief Valve Models DBE and ZDBE, Series X Size 6 (R 3)... 46 PSI (35 bar)... 8 GPM (3 L/min) RA 29 58/6.98 Replaces: 5.94 Valve for limiting system pressure Operation
More informationPLP Pump (up to 16 cm 3 /r max. 120 bar) PHV Pump (up to 32 cm 3 /r max. 250 bar) PVS Pump (up to 100 cm 3 /r max. 100 bar)
General Catalogue MODEL PLP Pump (up to 16 cm 3 /r max. 120 bar) PHV Pump (up to 32 cm 3 /r max. 250 bar) PVS Pump (up to 100 cm 3 /r max. 100 bar) PSP Pump (up to 100 cm 3 /r max. 160 bar) PSPK Pump (up
More informationFunctional Description
Under Oil ower ack SA 01 p max 250 bar Q max 17 l/min HA 7111 07/2014 Replaces HA 7111 12/2009 Small compact power packs used in lifting platforms, ramps and other applications 3 basic hydraulic circuits
More informationCheck-Q-meter type FD
BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Check-Q-meter type FD Size 12,16,25,32 up to 31.5MPa up to 560 L/min RE27551/12.2004 Replaces RE27551/05.2001 Features: - Porting pattern to DIN 24 340,
More informationDouble throttle/check valve Type Z2FS B/ (New Series) Huade América 1
Double throttle/check valve Type Z2FS 10...-30B/ (New Series) Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Double throttle/check valve Type Z2FS 10...-30B/ (New Series) Size 10 up
More information29 160/ Proportional Pressure Relief Valve Model DBE, (Series 5X) Ordering Code DBE 5X Y G24 1/ PSI (350 bar)
Size 10, 25 Proportional Pressure Relief Valve Model DE, (Series 5X)... 5100 PSI (350 bar)... 106 GPM (400 L/min) R 29 160/06.98 R 29 160/06.98 Replaces: 05.94 Operation by means of proportional solenoid
More informationCONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED
More informationPressure reducing valve, direct operated
Pressure reducing valve, direct operated RE 26564/5.11 Replaces: 2.3 1/8 Type DR 6 DP Size 6 Component series 5X Maximum operating pressure 315 bar [4568 psi] Maximum flow 6 l/min [15.9 US gpm] H7743 Table
More information10 SERIES MODULAR VALVES
General Information Mounting Surface : ISO 441-A-1-4-A, CETOP-1, NPA-D1 Up to 5 MPa (363 PSI), 8 L /min (11 U.S.GPM) Pub. EC-145 The modular valves are functional elements with which a hydraulic system
More informationLogic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON
More informationHydraulic Fluids. Note: For use with hydraulic fluids other than those listed above, please consult your Yuken representatives in advance.
Hydraulic Fluids Fluid Types Any type of hydraulic fluids listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 32 or VG 46. Use phosphate ester or polyol ester fluid.
More informationThrottle Check Valve Series FM
Characteristics Double-throttle check valves from the Parker Manapak series FM are in sandwich design for easy configuration of stack systems. Throttle and check valves are located in ports A and B. FM2
More informationDirectional Control Valve Series D1VW
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. A wide variety of spool options
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
More informationThrottle and throttle check valve
Throttle and throttle check valve RE 79/0.09 Replaces: 03.06 /6 Types MG and MK Size 6 to 30 Component series X Maximum operating pressure 35 bar Maximum flow 400 l/min K3564- Table of contents Contents
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 6 DP Nominal size 6 Series 5X Maximum operating pressure 315 bar (4600 PSI) Maximum flow 60 L/min
More informationPressure relief valve, pilot operated
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com Pressure relief valve, pilot operated Types ZDB and ZDB Nominal size 6 Component series
More informationService and Parts Manual. Minimum Filtration Required:
R GRESEN Hydraulics Model V0 Sectional Body Directional Control Valve Service and Parts Manual Maximum Operating Pressure: Minimum Filtration Required: 00 PSI ( bar) 0 Micron The information in this Service
More informationCheck valve. Type Z1S. Contents. Features. RE Edition: Replaces: 09.10
Check valve Type ZS RE 537 Edition: 05-06 Replaces: 09.0 Size 0 Component series 4X Maximum operating pressure 350 bar [5076 psi] Maximum flow 00 l/min [6.4 US gpm] H7647 Features Sandwich plate valve
More informationRA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.
R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to
More informationProportional Pressure Reducing Valves Series PE*W (Parker), R4R (Denison)
Characteristics / Technical Data Series PE*W (Parker), RR (Denison) Subplate mounted proportional pressure reducing valves are available with both Parker (series PE*W) and Denison (series RR) model codes.
More informationDirectional Control Valve Series D3W (Parker), 4D02 (Denison)
Characteristics Series D3W (Parker), 4D0 (Denison) The direct operated directional control valve size NG10 is available with both Parker (series D3W) and Denison (series 4D0) model codes. Both series are
More informationPRESSURE CONTROLS TECNORD
Pressure Reducing / Relieving Valves GPM PSI LPM BAR MODEL PAGE 1 4 38 276 DF-PRP 174 2 3 76 27 SK-PRP 176 1 4 38 276 DF-PWP 178 Typical Schematic Typical application for the PRP and PWP is multi-system
More informationVER03MP CONTINENTAL HYDRAULICS PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED
CONTINENTAL HYDRAULICS VER03MP PROPORTIONAL PRESSURE RELIEF VALVES PILOT OPERATED VER03MP - PROPORTIONAL PRESSURE RELIEF VAVLES PILOT OPERATED 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400
More informationDirectional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
More informationPressure reducing valve, pilot operated
Pressure reducing valve, pilot operated RE 685/.5 Replaces:. /6 Type DR K Size Component series X Maximum operating pressure 5 bar Maximum flow l/min K478/7 Table of contents Contents Page Features Ordering
More informationPilot operated pressure relief valve
0/06 ilot operated pressure relief valve.6 ype ZD/ ZD 6V..L4X Size 6 up to 5bar up to 60 L/min Contents Function and configuration 0 Symbols 0 Specification 0 echnical data 0 Characteristic curves 0 Unit
More informationISO cartridge valves type LIDD and LIQV Flow control, ISO 7368 sizes 16 63
Table H004/E ISO cartridge valves type LIDD and LIQV Flow control, ISO 78 sizes LIDD LIQV/K LIDD and LIQV are flow control valves not compensated, in ISO cartridge design, made by a functional cover and
More information4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated Model 4 WRA(E)B Size 6 Series 1X
More informationProportional Flow-Control Cartridges, Size 5
Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges
More informationPressure relief valve, pilot-operated. Type ZDB and Z2DB. Contents. Features. RE Edition: Replaces: 05.11
Pressure relief valve, pilot-operated Type ZDB and ZDB RE 576 Edition: 06- Replaces: 05. Size 0 Component series 4X Maximum operating pressure 35bar [4600 psi] Maximum flow 00 l/min [6.4 US gpm] H7747
More information4/3, 4/2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid
01/08 /3, /2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid 2.1 Type WE 10...L5X Size (NG) 10 Up to 350 bar Up to 150 L/min Contents Function and configurations -03 Specifications 0 Symbols 05
More informationModular Unit 6MB HYDRANOR MODULAR UNIT 6MB GENERAL DESCRIPTION. 6MB-200-**-2C General Arrangement. Rev
MODULAR UNIT 6MB GENERAL DESCRIPTION Figure 1 6MB-200-**-2C General Arrangement Rev. 5 5.1.1 Figure 2 General Arrangement 6MB-650-**-2C The Modular Units 6 MB is a complete unit for controlling of hydraulically
More informationPressure relief valve, pilot operated
Pressure relief valve, pilot operated RE 25764/04.07 Replaces: 2.02 /8 Types ZDBK and Z2DBK Size 0 Component series X Maximum operating pressure 20 bar Maximum flow 80 l/min H4080 Table of contents Contents
More informationDL /118 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO p max 280 bar Q max 50 l/min
41 211/118 ED DL3 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-03 p max 280 bar Q max 50 l/min MOUNTING SURFACE OPERATING PRINCIPLE ISO 4401-03-02-0-05 (CETOP
More information2/2 Solenoid Cartridge Valve, Size 10
2/2 Solenoid Cartridge Valve, Size 1 Q max = 8 l/min, p max = 3 bar Seat-valve shut-off, two-stage, monitored operating position 1 Description With integral electronic monitoring of operating position
More informationC C C C C C With mounting bolts Bolt thread up to M10 Dipstick length up to 25.2 inch. 70.
O i l L e v e l D i p s t i c k s C4.0410 C4.0412 C4.0421 C4.0431 C4.0450 C4.0464 With mounting bolts Bolt thread up to M10 Dipstick length up to 25.2 inch 70.10-2us D e s c r i p t i o n Application Controlling
More informationp max 350 bar Q max 50 l/min bar bar 50 Ports dimensions: P - port (pressure) T - port (drainage) T - port (drainage) A/B - port l/min
52 000/103 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by
More informationRSE 4-06 ORDERING CODE. DIRECTIONAL CONTROL VALVES KE qqqq Q(uD4 D n. 06 p max 35 MPa Q max 80 dm 3 /min. Du8
DIRECTIONAL CONTROL VALVES KE qqqq Q(uD4 D n 06 p max 35 MPa Q max 80 dm 3 /min Selenoid operated directional control valves of type RSE4)06 are used to control start3 stop and direction of luid in hydraulic
More information72 Series Servovalves
72 Series Servovalves TWO STAGE SERVOVALVES 72 SERIES SERVOVALVES The 72 Series flow control servovalves are throttle valves for 3 and preferably 4-way applications.they are a high performance, two-stage
More informationPressure relief valve, pilot-operated. Type ZDB and Z2DB. Contents. Features. RE Edition: Replaces: 10.05
Pressure relief valve, pilot-operated Type ZDB and ZDB RE 575 Edition: 06- Replaces: 0.05 Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 60 l/min H7746 Features Sandwich plate
More informationPressure relief valve, direct operated. Type ZDBY D, Z2DBY D. Features. Contents. RE Edition: Replaces: 01.09
Pressure relief valve, direct operated ype ZDBY D, ZDBY D RE 5 Edition: -8 Replaces:.9 Size 6 Component series X Maximum operating pressure 35 bar Maximum flow 6 l/min tb3 Features Contents Sandwich plate
More informationRPEL1-04. Functional Description HA /2014. Solenoid - Operated Directional Control Valves. Size 04 (D 02) 250 bar (3600 PSI) 30 l/min (8.
Solenoid - Operted Directionl Control Vlves RPEL-0 05/0 Size 0 (D 0) 50 r (600 PSI) 0 l/min (8.0 GPM) /-, /- nd /-wy directionl control vlves with solenoid control Solenoids cn e turned round their xis
More informationProportional pressure reducing valve, pilot operated
Proportional pressure reducing valve, pilot operated RE 29175/7.5 Replaces: 11.2 1/1 Types DRE and ZDRE Size 6 Component series 1X Maximum operating pressure 21 bar Maximum flow l/min H446 Table of contents
More informationUnloading relief valve: KPR-10/...P... 10/19 Relief reducing valve:
PRESSURE VALVES CONTENTS: Page Relief valves: RV06-2A...... 1/19 RV08-2A...... 2/19 RV22-2A...... 3/19 KPZ10/...... 4/19 KP-70/...... 5/19 KP60/...... 6/19 RM80-...... 7/19 Relief valve-prefill type: KPP...10/......8/19&9/19
More informationVED*MJ - PILOTED PROPORTIONAL DIRECTION CONTROL VALVES WITH OBE & FEEDBACK
CONTINENTAL HYDRAULICS VED*MJ PILOTED PROPORTIONAL DIRECTION CONTROL VALVES WITH OBE & FEEDBACK 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VED*MJ PILOTED
More information