STAR2 SERIES. Bore size from 1½" to 10" Stroke up to 40" Save Space up to 35% 250 PSI AIR, OIL Two-Year Warranty Economic design

Transcription

1 SPESVER ULTI-STE NFP STYLE IR YLINDER STRYL IN. Bore size from 1½" to 10" Stroke up to 0" Save Space up to 35% 250 PSI IR, OIL Two-Year Warranty Economic design based on " Bore,1" Stroke STR2 SERIES

2 STR2 SPESVER DESIN FETURES Solid luminum Head & ap achined from solid aluminum bar stock (6061 T6) and black anodized for corrosion resistance. (lso available in Stainless Steel). F Rod Seal Quad X gives the best seal and wipes dirt out for less maintenance and longer life of the cylinder. B Piston achined from solid aluminum bar stock (6061-T6) thicker than the standard pancake. Piston Wear Ring Nylon material is designed for low friction, and to ensure maximum wear in the cylinder in side load application. Eliminates metal-to-metal contact. Hard nodized ID luminum Tube (60 Rc) Provides superior wear resistance, and lower friction coefficient for maximum seal life. (lso available in Stainless Steel.) H Rod Bearing Oil impregnated sintered bronze minimizes operating friction in non-lube applications and provides maximum support of the piston rod. D E Piston Seal Nitrile Quad X seal provides better sealing with air and oil. (temperature: -5 to 10 or 10 to 219 F). (U cup also vailable) O-ring Tube End Seals Nitrile O-ring design is pressure compensating and reusable. I Piston Rod High strength steel. NITRORBURIZIN for highly corrosion-resistant coating, reliable performance and long life rod seal. Less friction. (lso available in Stainless steel). Tie rods orrosion resistant, stress proof steel maintains uniform compression on tube end seals. (Stainless may be used) D B I H F E TWO-YER WRRNTY STRYL YLINDER IN. PH : STRYL ( ) FX (630) LL STRYL YLINDERS RE WRRNTED FOR PERIOD OF TWO YERS FRO DTE OF SHIPENT FRO OUR PLNT, TO BE FREE FRO DEFETS IN WORKNSHIP ND TERIL UNDER ORRET USE, NORL OPERTIN ONDITIONS ND PROPER PPLITIONS. THIS WRRNTY DOES NOT EXTEND TO OODS DED, SUBETED TO IDENT, BUSE OR ISUSE FTER SHIPENT FRO OUR FTORY, NOR TO OODS LTERED OR REPIRED BY NYONE OTHER THN UTHORIZED STRYL REPRESENTTIVES. -2-

3 STR2 SPESVER BSI YLINDER DD tap x DP deep ST2 BSI OUNT EE N.P.T. 1 Rod dia. 2 FT KK thd deep LB +STROKE Basic cylinder has nuts at head end. Option N for nuts at cap end. 3 BL E sq. D 3/ 3/ 3/ 3/ 1 1/8 1 1/8 1 1/8 BL /8 3/8 3/8 3/8 1/2 1/2 1/2 D 3/8 1/2 1/2 1/2 7/8 7/8 7/8 DD /-20 5/ / /8-2 3/8-2 1/2-20 DP 5/16 5/16 5/16 5/16 7/16 7/16 7/16 E 1 1/ / / 1/2 5 1/2 EE 1/8 1/8 1/8 1/8 1/ 1/ 1/ FT 1/ 5/16 5/16 5/16 7/16 7/16 7/16 5/8 5/8 5/8 5/8 31/32 31/32 31/32 5/8 5/8 5/8 5/8 31/32 31/32 31/32 KK 3/8-2 7/ / / /-16 3/-16 3/-16 LB 1 3/ 1 3/ 1 3/ 1 3/ 2 11/ / /16 LD 1 3/ 1 3/ 1 3/ 1 3/ 2 11/ / /16 1/2 5/8 5/8 5/ ST2D Double rod end Rod dia. EE N.P.T. 1 FT KK thd deep 2 +stroke LD +STROKE E sq. 3-3-

4 OUNTIN OPTIONS NT #10-2 1/-20 5/ /8-16 1/2-13 1/2-13 5/8-11 SN 1 7/8 1 7/8 1 7/8 1 7/8 1 23/ / /32 TK 1/ 3/8 1/2 5/8 3/ 3/ 1 TN 1/2 5/8 7/8 1 1/ 1 1/2 2 1/ /16 XT 11/16 11/16 11/16 11/16 51/6 51/6 51/6 SN + STROKE XT NT Tap TN TK Deep ( holes) ST2S Bottom tap mount F2 P F F1 Head TF UF 3/8 3/8 3/8 3/8 1/2 1/2 1/2 FB 5/16 5/16 3/8 3/8 7/16 7/16 9/16 5/8 5/8 5/8 5/8 31/32 31/32 31/32 5/8 5/8 5/8 5/8 31/32 31/32 31/32 LB 1 3/ 1 3/ 1 3/ 1 3/ 2 11/ / /16 R TF 2 3/8 2 3/ 3 3/8 3 7/8 11/16 5 7/16 6 5/8 UF 3 3 3/8 1/8 5/8 5 1/2 6 1/ 7 5/8 LB ST2F1: ST2F2: +STROKE RETNULR HED RETNULR P R FB HOLES () ST2F1 & ST2F2 Rectangular mounts D dia B 3/ 3/ 3/ 3/ 1 1/ 1 1/ 1 1/ D 1/2 1/2 1/2 1/2 3/ 3/ 3/ W 3/8 3/8 1/2 1/2 3/ 3/ 3/ L 3/ 3/ 3/ 3/ 1 1/ 1 1/ 1 1/ 5/8 5/8 5/8 5/8 7/8 7/8 7/8 X 2 7/8 2 7/8 2 7/8 2 7/8 7/16 7/16 7/16 W B W L learance radius X ST2P1 Detachable short clevis mount DD P BL HED BB 7/8 7/ / 1 1/ 1 1/2 BL DD # /-28 5/16-2 5/16-2 3/8-2 3/8-2 1/2-20 LB 1 3/ 1 3/ 1 3/ 1 3/ 1 3/ 2 11/ /16 ZB 2 1/8 2 1/8 2 1/8 2 1/ BB ZB +course LB +course BB ST2X1 : Both tie rods extended ST2X2: ap end tie rods extended ST2X3: Head end tie rods extended ST2X Tie rods extended mounts --

5 OUNTIN OPTIONS SH SB dia. ST SB 5/16 5/16 5/16 3/8 1/2 1/2 1/2 SH 1 1/16 1 1/ 1 1/2 1 13/16 2 3/8 2 3/ 3 1/ SS 1 1/8 1 1/8 1 1/8 1 1/8 1 23/ / /32 ST 1/ 1/ 1/ 1/ 1/2 1/2 1/2 TS 2 3/8 2 3/ 3 1/ 3 3/ 3/ 5 1/2 6 1/2 US 3 1/8 3 1/2 1/2 5 3/ 6 1/2 7 1/2 XL 3/ 3/ 3/ 3/ XS 11/16 11/16 11/16 11/16 51/6 51/6 51/6 XL SS +stroke XS US TS ST2S2 Side lug mount B holes (6) H B 7/16 7/16 7/16 7/16 9/16 9/16 11/16 H 1 1 3/16 1 7/16 1 5/8 1 15/16 2 1/ 2 3/ L / 1 1/ 1 3/8 O 1/2 1/2 1/2 1/2 1/2 1/2 5/8 T 1/8 1/8 1/8 1/8 3/16 3/16 3/16 S 115/79 1 1/ 1 3/ 2 1/ 2 3/ 3 1/2 1/ S 3 3/ 3 3/ 3 3/ 3 3/ 5 3/16 5 3/16 5 7/16 S + stroke L O S T ST2S1 ngle mount W B W D dia. L FL XD +stroke B 3/ 3/ 3/ 3/ 1 1/ 1 1/ 1 1/ D 1/2 1/2 1/2 1/2 3/ 3/ 3/ W 3/8 3/8 1/2 1/2 3/ 3/ 3/ FL 1 1/8 1 1/8 1 1/8 1 1/8 1 7/8 1 7/8 1 7/8 L 3/ 3/ 3/ 3/ 1 1/ 1 1/ 1 1/ 5/8 5/8 5/8 5/8 7/8 7/8 7/8 XD 3 1/ 3 1/ 3 1/ 3 1/ 5 1/16 5 1/16 5 1/16 (SUPPLIED WITH PIN & SNP RIN) ST2P2 Detachable clevis mount D dia. L B 3/ 3/ 3/ 3/ 1 1/ 1 1/ 1 1/ D 1/2 1/2 1/2 1/2 3/ 3/ 3/ FL 1 1/8 1 1/8 1 1/8 1 1/8 1 7/8 1 7/8 1 7/8 L 3/ 3/ 3/ 3/ 1 1/ 1 1/ 1 1/ 5/8 5/8 5/8 5/8 7/8 7/8 7/8 XD 3 1/ 3 1/ 3 1/ 3 1/ 5 1/16 5 1/16 5 1/16 B FL XD +stroke (SUPPLIED WITH PIN & SNP RIN) ST2P Detachable eye mount -5-

6 OUNTIN OPTIONS & NFP ESSORIES STRYL Standard Style female thread rod Rod End Style KK thread x deep rod KK thread rod KK thread Option Style 2S (studded) Option Style 2 ROD DI. D FF KK 1/2 5/8 3/8 3/8 7/ /2-20 3/8-2 5/8 3/ 3/8 1/2 1/2-20 5/8-18 7/ /8 1/2 7/8 7/ /-16 rod thread STD FOR ½ ROD DI. Option Style1 Large thread rod FF thread Option Style 1F Full dia. thread W B W ER D PRT# B D E H W ER KK L R /2 1 1/2 1 1/2 1/2 7/ / R / 2 3/8 1 1/ 5/8 3/ 3/ / E KK H ROSS HEX FLTS OTHER SIZE RE VILBLE, SK YOUR DISTRIBUTOR OR FTORY. (R-10 KK=1-1, R-13 KK=1¼-12, R-17 KK=1½-12, ET) NFP rod clevis D ER B D PRT# B D ER KK RE-05 3/ 1 1/2 3/ 1/2 5/8 7/16-20 D dia. RE /8 2 1/16 1 1/ 3/ 7/8 3/-16 OTHER SIZE RE VILBLE, SK YOUR DISTRIBUTOR OR FTORY. (RE-10 KK=1-1, RE-13 KK=1¼-12, RE-17 KK=1½-12, ET) NFP rod eye KK FL DD tap W B W L D E sq. RE PRT# B D W DD E FL L RE USES ON BORE B /2 1/2 3/ /2 1 1/8 3/ 1/2 1 5/8 1½ - 2-2½" B / 5/8 1/ /2 1 7/8 1 1/ 3/ 2 9/16 3¼ - - 5" NFP levis Bracket FL DD B L D E sq. RE PRT# B D DD E FL L RE USES ON BORE B /2 1/2 2 1/2 1 1/8 3/ 1/2 1 5/8 1½ - 2-2½" B / 5/8 3 1/2 1 7/8 1 1/ 3/ 2 9/16 3¼ - - 5" NFP Eye Bracket -6-

7 HOW TO ORDER EXPLE: ST2 S2 - x P - V ST2 BSI ODEL OUNTIN OPTIONS BORE STROKE STD ROD END OPTIONS ST2D DOUBLE ROD F1 F2 PI P2 P S1 S2 S X1 X2 X3 RETN. HED OUNT RETN. P OUNT LEVIS OUNT DETHBLE LEVIS OUNT EYE OUNT NLE OUNT SIDE LU OUNT BOTTO TP OUNT BOTH TIE RODS EXTENDED P END TIE RODS EXTENDED HED END TIE RODS EXTENDED 1 1/ /2 3 1/ 5 EXPLE ST2S2-x10-PP-V is a STR2 series cylinder, " bore, 10" stroke, side lug mount, female rod thread, port position with viton seals. To order seal kits, add the prefix ST2SK to the bore diameter ex: ST2SK- 1/2 #1 1 #1F 1/ S 2/12 3 3/ ask for other strokes LE, large LE, full dia. # LE, small # LE, studded # FELE, STD N PPx REx U V W B BH B NR BB P S S NUTS T P END PORT POSITION (1,2,3,) ROD EXTENSION U UP SELS SELS DE OF Viton WIPER NETI PISTON BUPER BOTH ENDS BUPER HED END BUBER P END NON-ROTTIN (for pick & place appl.) BK TO BK ULTI-POSITIONS ULTI-STES DUSTBLE STROKE Switch specifications Switch part Number LRS-00 LHS-31 LHS-32 Spec. Reed Switch, Electronic Sensor, Electronic Sensor, OV, LED LED, Sourcing LED, Sinking able length Switching Voltage Switching urrent Switching power Switching Speed VD/V 50/60 Hz 0.5 mp ax mp in. 10 Watts ax. 0.5 ms operate 0.1 ms release 9ft PV able 6-2 VD 6-2 VD 0.5 mp ax. 0.5 mp ax. 12 watts ax. 12 watts ax. 1.5µs operate 0.5µs release SELETIN BORE SIZE 1.5µs operate 0.5µs release Voltage Drop 3.5 Volts 1.0 Volts 1.0 Volts Temperature range -20 to 80 - to 176 F Switch Function SPST Normally Open Normally open PNP output Normally open NPN output Shock up to 30 (11msec.) Vibration up to 20 (10-55 Hz) How To Order Place lamp code after switch Part Number. Exemple: LRS-00- Reed switch for 1.5 Bore. NOTE : dd 1/ to total length for 1-1/8 to 2½ bore when using magnetic piston The following formula may be used in the selection of the proper bore size: - Extended (push) force in pounds = (bore area in sq. in.) x (pressure in psi) - Retract (pull) force in pounds = (bore area in sq. In.)- (Rod area in sq. In.) x (pressure in psi) Viton are registered trademarks of DuPont Dow Elastomers. Bracket code Suffix = 1-1/8, 1½, 2 & 2½ bore B = 3¼ & bore = 5, 6 & 8 bore Wiring Diagrams - SUPPLY 6-2 VD + REED SWITH LRS-00 WHT - ~ SUPPLY /D + ~ BRN WHT LOD *LOD sourcing *LOD sinking RN BRN ELETRONI SWITH ELETRONI SWITH - WHT SUPPLY 6-2 VD + BRN LOD RN BORE RE ROD SIZE ROD RE (IN.) (SQ. IN.) (IN.) (SQ. IN.)

8 SPESVER, ULTI-STE, NFP STYLE, IR YLINDERS STRYL IN. S: ULTI-STES IR YLINDER STR2 SERIES NFP STYLE OUNT SEE OUR BROHURE FOR OUNTIN OPTIONS VENT POSITION 1 EE N.P.T. THE ONLY UPRDBLE 1 FOR PLITION THT REQUIRE EXTR SPEED TOP PORT N BE DDED SK FOR OPTION TP-x FT ROD DI. KK THD DEEP 2 TIPS: FOR HIHER YLE TIE PPLITION OUNT QUIK EXHUST ON TOP PORT. LB 3 D BL E SQ. BORE / 3/ 3/ 1 1/8 1 1/8 1 1/8 1 5/8 1 5/8 BL /8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 D 1/2 1/2 1/2 7/8 7/8 7/8 1 3/16 1 3/16 E EE 1/8 1/8 1/8 1/ 1/ 1/ 3/8 3/8 FT 5/16 5/16 5/16 7/16 7/16 7/16 1/2 1/2 5/8 5/8 5/8 31/32 31/32 31/32 1 7/16 1 7/16 5/8 5/8 5/8 31/32 31/32 31/32 31/32 1 7/16 KK 7/ / / /-16 3/-16 3/ LB DIENSION LB EQULS NUBER OF STES TIES STROKE PLUS YY 5/8 5/8 5/ /8 1 3/8 THE YY VLUE IS FOR STNDRD ULTI-STES EXTEND ( SEX) OR RETRT ( SRX) ODELS. OPTIONL ULTI- STES RETRT-EXTEND ( SEXRX) REQUIRE DDITIONL LENTH. FORES RE IVEN IN POUNDS T 100 PSI BORE YY YY YY PUSH FORE PUSH FORE PUSH FORE PUSH FORE 2 STES 3 STES STES 2 STES 3 STES STES DDER FOR DD. STES 1 1/2 2 1/ 2 3/ 3 1/ / 2 3/ 3 1/ /2 2 1/ 2 3/ 3 1/ / 3 3/8 1/16 3/ /8 1/16 3/ /8 1/16 3/ / / / / 6 5/ WE DO ORE THN STES SK THE FTORY FOR DIENSIONS, DESIN Y HNE - STNDRD STROKES: ½-1-1½ -2-2½ inches - OPTIONL STROKES NY OTHER STROKE THROUH 12 inches OTHER OPTIONS RE VILBLE : - PORTED BFFLE - ONE SIZE LRER PORT - TOP PORT (for higher cycle times) - DUSTBLE EXTEND OR RETRT STROKE - HYDRULI ONTER-BLNE vailable ounting: Rectangular Head and cap Flange (F1 F2) Tie rods Exended (X1 X2 X3) ngle ount (S1), levis ount (P1, P2, P) DD ON S-0397 FOR TLO STR2-0397

9 SPESVER ULTI-STE NFP STYLE IR YLINDER STRYL IN. SPESVER ULTI-STE PNEUTI YLINDER STRYL ND IN. SPESVER ULTI-STE PNEUTI YLINDER STRYL ND IN. Not Enough Force Don't hange The Design dd Stage! THE ONLY YLINDER UPRDBLE! SL & RL LINE Buna N Quad ring rod and piston seal Hard anodized heavy wall aluminum alloy Heavy duty cap for hard conditions Rod bushing in oil-impragneted bronze ll air cylinders are permanently lubricated Their design allows easy cleaning 250 psi, air or oil ROUND LINE STR3 SERIES - N.F.P.. INTERHNEBLE YLINDERS BORE SIZES 1½ - 10 PNEUTI YLINDER WITH ULTI-STES IVES INREDIBLE FORE ND SPEED ½TO8TONS IR PILOTED ONTROL VLVE UPRDBLE SPESVER YLINDERS RL-1095 ROUND LINE SPESVER YLINDERS FIND US ON THE INTERNET EIL : STRYL@STRYL.O T-SLOTTED R FOR BETTER TTHEENT OF DIES STNDRD T-SLOTTED PRESSURE PLTE HYDRULI ONTER-BLNE OR SPEED ONTROL (OPTION) FILTER REULTOR LUBRIFITOR (OPTION) ONE PIEE FRE IN HIH STENTH ST IRON STRYL YLINDER IN. PH : STRYL ( ) FX (630) WIDE OPENIN IN BED (9X3) ENTIRELY IR OPERTED! NO ELETRIS, NO EHNIS NO HYDRULIS. IN ND: TEL: (50) FX (51) TP & SP SERIES - IR PRESSES 1/2 TO 8 TONS PRINTED IN ND TLO # STR2-0200