ISO 9001 COMPACT SPOOL VALVES
|
|
- Lydia Booth
- 6 years ago
- Views:
Transcription
1 ISO 900 COMPC SPOO VVES
2 COMPC SPOO VVES / MECHNICY OCKED IR INE SEDIMEN IPED Y NO SPIR IS NO EXRUSION DESIGN FEURES VVES Balanced spool construction allows ports to be plugged for or way function, or restricted for inexpensive cylinder exhaust speed control. For selector or dual pressure applications, consult the Factory. Inline or manifold mount: flexible, efficient. ide variety of options and operators available. Specific application needs? Consult the Factory. e will build it for you. PERED EE-SE... Eats Dirt Bi-directional tapered ee-seal flexes to clean spool. Eliminates Monday morning sticking problems. ested tough and proven reliable according to SE specifications: Rust and water injected every 86,000 cycles for 0 million cycles. SOENOID... Guaranteed gainst Burnout hree-way pilot uses full air line pressure to shift the valve. Pilot is internally supplied when the pressure at port one is to 0 PSIG (0 to 00 kpa). Coil is hermetically sealed as an integral watertight molded unit. Intrinsically-safe and explosion-proof versions available. Push non-locking override (Extended turn and turn lock available). CS - (C.) U - (SD 9) EX - (08x) INDEX PRODUCS CERIFIED O PB - (EExmII) (EExiaIIC6) CE - (7//EEC), (89/6/EEC) Page Design Features Specifications Model Number Chart Standard Solenoid Models Dimensional Information ir Pilot Models Dimensional Information Mechanical Models Dimensional Information Manual Models Dimensional Information Manifolds Dimensional Information / / ccessories, Options 6 Electrical Information 7 Service Information 8
3 VVE OPERION DE-ENERGIZED DE-ENERGIZED 07 0 ENERGIZED ENERGIZED / SINGE - way position single operator valves shift, apply pressure from port to, and exhaust pressure from port to when a maintained signal is applied to operator -. Valves reset, apply pressure from port to, exhaust pressure from port to when the signal is removed. / DOUBE - way position double operator valves shift, apply pressure from port to,and exhaust p r e s s u r e f r o m t o w h e n a momentary si gnal i s appli ed to operator -. Valves shift, apply presure from port to, and exhaust p r e s s u r e f r o m t o w h e n a momentary si gnal i s appli ed to operator -. SPECIFICIONS 6 ENERGIZED ENERGIZED ENERGIZED DE-ENERGIZED DE-ENERGIZED DE-ENERGIZED ENERGIZED ENERGIZED ENERGIZED / B OC K - way posi ti on blocked center valves operate like / double valves except shift when a maintained signal is applied to either - or -. Valves reset to center posi ti on when si gnal i s removed with all ports blocked. EXHUS - way position exhaust center valves operate like / double valves except shift when a maintained signal is applied to either - or -. Valves reset to center posi ti on when si gnal i s removed with port open to, port open to, and port blocked. PRESURE - way position pressure center valves operate like / double valves except shift when a maintained signal is applied to either - or -. Valves reset to center posi ti on when si gnal i s removed with port open to ports a nd, a nd p o r t s a nd a r e blocked. COMPC SPOO VVES OPERING EMPERURES SOENOID PIO OPERED REED BUN-N SES (REED NBR, Standard) FUOROESOMER SES (FPM (FKM), Option ) o o Standard -8 C to + C ( 0 o F to + o o o F) -8 C to + C ( 0 o F to + o F) o o High emp Coil (Option C) -8 C to +8 C ( 0 o F to +80 o o o F) -8 C to +8 C ( 0 o F to +80 o F) OPERING PRESSURES SOENOID PIO OPERE D INE POR EXERN PIO POR S tandard Position 0-00 kpa ( - 0 PSIG) Not Required S tandard Position - 00 kpa (0-0 PSIG) Not Required E xternal Pilot (Option B) V acuum - 0 kpa (Vacuum - PSIG) 0-00 kpa ( - 0 PSIG) FIRION ND UBRICION MEDI - IR OR INER GS ubrication of utomatic Valve products is not required but is recommended to maximize service life. Oils should o o compatible with seal material, have an ISO viscosity, and have an aniline range of 8 C (80 F) and 99 o C o ( 0 F). Refer to Maintenance section of catalog for recommended lubricants. be Filter to 0 microns or better. o For temperatures below 0 F, air must be dry to prevent formation of ice. MODE NUMBER CHR BODY YPE POR SIZE FUNCION BODY DESIGN OPEROR CENER OPEROR OPEROR VOG E OPIONS 07 0 ININ E /8 / B C D E Y POSIION Y POSIION ME Y POSIION BOCK Y POSIION EXHUS Y POSIION PRESSURE B SINGE DOUBE F G I J K V IR PIO HND EVER - INE HND EVER - MNIFOD PM BUON CM FOO PED FOO REDE INRINSICY-SFE SOENOID SNDRD SOENOID D POSIIO N SPRING C M N R V IR PIO POSIION SPRING MNU POSIION DEEN MNU POSIION DEEN MNU POSIION SPRING INRINSICY-SFE SOENOID SNDRD SOENOID 0/0, 0/60 B 0/0, 0/60, VDC D /0,/60, VDC DB VDC B C C D G S FUOROESOMER SES EXERN PIO CONNECION CONDUI COI CONDUI COI HIGH EMPERURE DUSPROOF 8" FYING EDS O COI SINESS SEE BODY (0-/" ONY) SS 6 SINESS SEE BODY (0-/" ONY) G HREDS Y EXPOSION-PROOF COI (CS, FM) Z EXPOSION-PROOF COI (EX, PB) / /8 / PUSH URN OCKING OVERRIDE EXENDED URN OCKING OVERRIDE
4 COMPC SPOO VVES / SNDRD SOENOID MODES 07 SINGE SOENOID 0 SINGE SOENOID 6 MODE NUMBERS / / POR SIZE Cv (l/min) BODY MERI SE MERI Kg (B) SINGE DOUBE BOCK EXHUS PRESSURE 07 / (,,) /8 /8 (,) 0.7 (690) 070R* 070B* 070CBD* 070DBD* 070EBD* 070R* 070B* 070CBD* 070DBD* 070EBD* UMINUM NBR, (.6) 0 / /8.8 (770).0 (970) 00R* 00B* 00CBD* 00DBD* 00EBD* 00R* 00B* 00CBD* 00DBD* 00EBD* UMINUM NBR, (.9) 6 (,,) / / (,) 9.0 (8860) 9. (90) 606BR* 606BB* 606CBD* 606DBD* 606EBD* 607BR* 607BB* 607CBD* 607DBD* 607EBD* UMINUM NBR.86 (.) *Coils sold separately. Refer to Electrical Section for selection.
5 DIMENSION INFORMION / COMPC SPOO VVES 6. C F G H M 07,.6 7,9. 7,9. 8,.7 6,9.66,.00,.7 9,7.6 9,7.6 -,0.6,0.8 0,.88,.,7.0 6,.6 0,9.,.00 8, ,.7, ,8.00,.00 8,6.,.9,.00 7, ,. 6,. Units of Measure: op - mm, Bottom - inches
6 COMPC SPOO VVES POR SIZE Cv (l/min) OPEROR / / BODY MERI SE MERI Kg (B) INGE S E OUB D K OC B XHUS E E PRESSUR 07 /8 0.7 (690) IR PIO 070R 070B 070CBD 070DBD 070EBD UMINUM R NB 0, (.6) / (,,) /8 (,) 070BR 070B 070CBD 070DBD 070EBD 0 /.8 (770) IR PIO 00R 00B 00CBD 00DBD 00EBD UMINUM R NB 0, (.9) /8.0 (970) 00R 00B 00CBD 00DBD 00EBD 6 (,,) / (,) 9. (90) IR PIO R 607B 607BB 607CBD 607DBD 607EBD M UMINU R NB,86 (.) 6 IR PIO MODES SINGE 0 DOUBE 07 6 MODE NUMBERS /
7 DIMENSION INFORMION / COMPC SPOO VVES C F G H M 07,.6 7,9. 7,9. 8,.7 6,9.66,.00,.7,0.77,0.77 -,0.6,0.8 0,.88,.,7.0 6,.6 0,9.,.00 8, ,.7, ,8.00 0,8.00 8,6., ,., ,. 6,. Units of Measure: op - mm, Bottom - inches 7
8 COMPC SPOO VVES / MECHNIC MODES CM ROER MODE NUMBERS / POR SIZE Cv (l/min) OPEROR BODY MERI SE MERI Kg (B) SINGE 0 / /8.8 (770).0 (970) CM ROER 00JR 00JR UMINUM NBR 0, (.7) 8
9 DIMENSION INFORMION / COMPC SPOO VVES C F G H M 0,.88,.,7.0 6,.6 0,9.,.00 8,.90 90,.6,.7,6.97 Units of Measure: op - mm, Bottom - inches 9
10 COMPC SPOO VVES / MNU MODES FOO PED HND EVER (INE MOUNED) FOO REDE PM BUON MODE NUMBERS ( Y POSIION) / POR SIZE Cv (l/min) OPEROR BODY MERI SE MERI Kg (B) DEENED SPRING REURN FOO PED* - 00KR FOO REDE 00BM 00R /.8 (770) HND EVER INE MOUNED HND EVER MNIFOD MOUNED 00BFM 00BGM 00FR 00GR UMINUM NBR 0,7 (.) 0 PM BUON 00BIM 00IR FOO PED* - 00KR FOO REDE 00BM 00R /8.0 (970) HND EVER INE MOUNED HND EVER MNIFOD MOUNED 00BFM 00BGM 00FR 00GR UMINUM NBR 0,7 (.) PM BUON 00BIM 00IR *Guard sold separately
11 MNU MODES COMPC SPOO VVES HND EVER (INE MOUNED) FOO REDE PM BUON MODE NUMBERS ( Y POSIION) POR SIZE Cv (l/min) OPEROR BODY MERI SE MERI Kg (B) DEENED SPRING REURN / BOCK EXHUS PRESSURE BOCK EXHUS PRESSURE FOO REDE 00CN 00DN 00EN 00CBC 00DBC 00EBC /.8 (770) HND EVER INE MOUNED HND EVER MNIFOD MOUNED 00CFN 00CGN 00DFN 00DGN 00EFN 00EGN 00CBFC 00CBGC 00DBFC 00DBGC 00EBFC 00EBGC UMINUM NBR 0,7 (.) 0 PM BUON FOO REDE 00CIN 00D IN 00EIN 00C BIC 00D BIC 00EBIC 00CN 00DN 00EN 00CBC 00DBC 00EBC /8.0 (970) HND EVER INE MOUNED HND EVER MNIFOD MOUNED 00CFN 00CGN 00DFN 00DGN 00EFN 00EGN 00CBFC 00CBGC 00DBFC 00DBGC 00EBFC 00EBGC UMINUM NBR 0,7 (.) PM BUON 00CIN 00DIN 00EIN 00CBIC 00DBIC 00EBIC
12 COMPC SPOO VVES / DIMENSION INFORMION FOO PED FOO REDE DESCRIPION 0 GURD - FOO PED C F G H H H M 0,.88,.,7.0 6,.6 0,9.,.00,.06 8,7.8 8, ,.7,6.97 Units of Measure: op - mm, Bottom - inches
13 HND EVER DIMENSION INFORMION / COMPC SPOO VVES PM BUON C F G H H H M 0,.88,.,7.0 6,.6 0,9., , ,.7 9,.8,6.97 Units of Measure: op - mm, Bottom - inches
14 COMPC SPOO VVES / MNIFODS 07 0 FEURES Common inlet and common exhaust ports. op cylinder ports. Valve mounting screws attached from bottom. Seals and mounting hardware included. MNIFOD* CCESSORIES NO. OF SIONS MODE NUMBER PORS,, & G Kg (B) BOCKING DISK BNK SION COVER , (.) , (.9) / 0,6 (.) ,7 (.6) ,9 (.0) , (.8) ,6 (.) /8 0,8 (.7) ,0 (.) , (.7) *Seals and mounting hardware included.
15 DIMENSION INFORMION / COMPC SPOO VVES C E F G G G M 07 9,8.78,.6,8.9 9,9.9 7,9. 9,7.7,.86,.8,7. 6,.0 0,.88 7,.68,8.,8.,8.86 9,. 9,.,6.0,7. 6,.0 Units of Measure: op - mm, Bottom - inches
16 COMPC SPOO VVES / SNDICH FO CONRO CCESSORIES FEURES Restricts air flow from port to port and from port to port. Mounts between valve and manifold. Vibration proof metering control. MODE NUMBER 07 B B80-00 DIMENSION H,7.0,7.0 G Kg (B) 0,06 (.) 0,09 (.9) Units of Measure: op - mm, Bottom - inches OPIONS (ISED HE END OF HE MODE NUMBER IN PH-NUMERIC ORDER) - FUOROESOMER SES For applications where fluid media or ambient conditions are not compatible with nitrile seals. Note: Fluorocarbon seals do not increase the effective temperature range of the valve. For high temperature applications, consult the factory. B - EXERN PIO For solenoid applications when the pressure to port is less than PSIG ( BR). See example below for field conversion. FIED CONVERSION Remove solenoid and cap from valve body. Rotate gasket 80 degrees so that the internal pilot hole in the valve body is covered by the gasket. Reassemble the gasket, cap and solenoid to the valve body. Make sure gasket completely covers internal pilot hole before tightening screws. Remove the /8 NPF pipe plug from the cap and make the external pilot connection. C - CONDUI COI Refer to Electrical Section for details. C - CONDUI COI HIGH EMPERURE Refer to Electrical Section for details. D - DUSPROOF 6 INERN PIO VVES REMOVE /8 NPF PUG FOR EXERN PIO POR EXERN PIO VVES GSKE ROED 80 DEG. For applications in extremely dusty and contaminated environments. Standard vent ports are plugged. Operators breathe through the exhaust ports via flats on the end of the spools. G - COI IH 8 FYING EDS Refer to Electrical Section for details. - O COI Refer to Electrical Section for details. S - SINESS SEE Stainless steel body, all other external parts corrosive resistant; for corrosive environment applications. SS - 6 SINESS SEE Stainless steel body, all other external parts corrosive resistant; for corrosive environment applications. - G HREDS Y - EXPOSION-PROOF COI (CS,FM) Refer to Electrical Section for details. Z - EXPOSION-PROOF COI (EX, PB) Refer to Electrical Section for details.
17 NEM X IH DIN 60 CONNECION DESCRIPION NEM X IH 8" EDS EECRIC INFORMION HEN HE 8H CHRCER OF MODE NUMBER IS: INSRUCIONS Order coil separately (specify voltage code from below) Order coil separately (specify voltage code from below) / COI PR NUMBER ** = VOGE 709-9** 709-9**G COMPC SPOO VVES NEM X /" CONDUI IH 0" EDS EXPOSION-PROOF /" CONDUI IH " EDS [ CS 06X FM PPROVED C. I; ZONEEx m II ; Ex m II C. I; Div. ; GR., B, C, D C. II; GR. E, F, G C. III o a= -0 C to +60 o C NEM:, X, 7C, 7D ] Order coil separately (specify voltage code from below) Order coil separately (specify voltage code from below) 709-9**C 709-9**C (high temperature 8 o C maximum ) 709-**Y INRINSICY-SFE IH SRIN REIEF (EEx ia IIC6) C. I: Div. ; GR., B, C, D C. II: GR. E, F, G C. III: Div. Hazardous ocation V Coil and Connector included with valve (VDC only) EXPOSION-PROOF IH m CBE ND SRIN REIEF [MEES EUROPE EX SNDRDS] (Ex II G EExm II - I EC Exm II - PB NO 0 08x) Z Order coil separately (specify voltage code from below) 7-9** VOGE +/- 0 % /0 /60 0/0 0/60 0/0 0/60 * * C O D E NEM INRUSH V CURREN ( MPS) E Z NEM HODING V Z RESISNC o ( C) NEM V Z POER (C = V DC = S) NEM 7 V 7 V 7 V 7 V D B V Z For alternative lower wattage options, please consult the factory. VDC D VDC DB VDC DB VDC B DIN 60 CONNECORS YPE SRIN REIEF IHOU CORD /" CONDUI IHOU CORD MODED IH 6' CORD SRIN REIEF IH IGH 00-0 C 8-0 DC 6-8 C/DC SRIN REIEF IH IGH + 6' CORD 00-0 C 8-0 DC 6-8 C/DC PR NUMBER DB
18 COMPC SPOO VVES / (SINGE O POSIION VVE SHON) SOENOID - 0 SPRING SERVICE KI INFORMION + EE SES (6) SERVICE KI INSION + PISON SE CP OPEROR REINED IH M SCRES ORQUE 9 IN BS +/-0% COI COI REENION NU. Remove Coil retention nut.. Remove Coil.. Remove screws from cap of operator.. Remove cap.. Remove existing serviceable components. 6. Replace with kit components. + ll seals must be lubricated with Magnalube-G or equivalent. 7. lign pilot hole in body with pilot hole in cap. 8. orque screws as shown above. ubrication of utomatic Valve products is not required but is recommended to maximize service life. Oils should be compatible with seal material, have an ISO or lighter viscosity, and have an aniline point between 8 o C (80 o F) and 99 o C (0 o F). Refer to Maintenance section of catalog for recommended lubricants. MODE NUMBERS FUNCION SINGE DOUBE PR NUMBER DESCRIPION PR NUMBER DESCRIPION 07 K-07-SG K-07-SG- (Fluoroelastomer) ee Seals (6) Piston Seal () Spring () K-07-DB K-07-DB- (Fluoroelastomer) ee Seals (6) Piston Seal () 0 K-0-SG K-0-SG- (Fluoroelastomer) ee Seals (6) Piston Seal () Spring () K-0-DB K-0-DB- (Fluoroelastomer) ee Seals (6) Piston Seal () 6 K-6-SG K-6-SG- (Fluoroelastomer) ee Seals (6) Piston Seal () Spring () K-6-DB K-6-DB- (Fluoroelastomer) ee Seals (6) Piston Seal () 8
ISO 9001 SAE SPOOL VALVES
ISO 900 SAE SPOOL VALVES SAE SPOOL VALVES MECHANICALLY LOCKED AIR LINE SEDIMEN WIPED AWAY NO SPIRAL WIS NO EXRUSION DESIGN EAURES VALVES Conforms to SAE J205 specifications for series 25, 250, 500, and
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICIONS D08H Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
More informationDirectional Control Valves Series D81V. General Description. Operation. Features. Specifications
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold
More information% # ) Air and Inert Gas Intrinsically Safe Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT
4 Air and Inert Gas Intrinsically Safe Valves Brass, Aluminum, or Stainless Steel Bodies /4" to " NPT / 3/ 4/ 5/ 5/3 Features Intrinsically safe solenoid enclosures to provide corrosion resistance in harsh
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationSolenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
More informationSc h rader Bellows. CS Series Air Control Valves. 2 & 3-Way, Inline, Manifold & Stacking Direct Acting Solenoid Valves
Sc h rader Bellows 2 & 3-Way, Inline, Manifold & Stacking Direct cting Solenoid Valves INDEX PGE Features Inline Valves... 3 Stacking Valves... 4 Manifold Valves... 5 Valve Model Number System... 6 Solenoid
More informationNessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT Valve program for small and medium flows: VDHT 3/8 E 2/2 VDHT 1/2 E 2/2 VDHT 3/8 EA 2/2 VDHT 1/2 EA 2/2 Valve program
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More information10 MM MINIATURE VALVES
1 MM MINIATURE VALVES LATCHING 1 MM MINIATURE VALVES Clippard s Latching series features a careful balance of forces through the precise placement of a permanent magnet in the valve core produces a bi-stable
More informationThe H Series Leak-Proof, High-Pressure Valves Versa Products Company has been supplying high quality pneumatic and hydraulic directional control valve
High Pressure Valves Series H Bulletin H-Tech 0 VALVES The H Series Leak-Proof, High-Pressure Valves Versa Products Company has been supplying high quality pneumatic and hydraulic directional control valves
More informationControl & Power, Inc
Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder
More information% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT
Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NT / 3/ / 5/ 5/3 Features Available in different coil terminations H Class coil construction Designed
More informationV200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating
V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic
More informationMaximum Line Resistance vs. Length of Wire Max. Loop Resistance. Max. Wire Run 18AWG 7x26 Stranded (ft)
. W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased
More information% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.
Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow
More informationContents. Series Material Connection Pressure Temperature Function Page. Microsol PPS, PA, Stainless steel Subbase 0-10 bar +30 C 2/2, 3/2 18
Contents Solenoid Valves with Differential ressure - Miniature Solenoid Valves Series Material ressure Temperature Function age Microsol S,, Stainless steel Subbase 0-10 bar +30 C /, 3/ 18 Solenoid Valves
More informationDirectional Control Valves Series D111VW. General Description. Features. Performance Curves
Technical Information General valves are piloted by a D1VW valve. The valves can be ordered with position control. The minimum pilot pressure must be ensured for all operating conditions of the directional
More informationDIECT MOUNT CTUTO VLVES LUMINUM CONSTUCTION SEIES C5 NMU General Description The Versa C5 NMU mount control valve is a high flow, 5-port, solenoid/pil
NMU DIECT MOUNT PNEUMTIC CTUTO VLVES I VLVES FO INDUSTY SINCE 1949 BULLETIN NMce-2004 SOLENOID CTUTION 1/4 NPT or G1/4 DIECT MOUNT TO MNY DIFFEENT CTUTOS 10 YE WNTY C5 Series: E5 Series: 3-way or 4-way,
More informationSOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2
SOLENOI VLVES no voltage release (lever type) manual reset construction 1/4 to 1/2 U 1 3 2 3/2 Series 307 FETURES Lever type Manual Reset function which means that the valve has to be energized as well
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2502/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More information3/8 & 1/2 NPT. 4-Way - 5 Ported - 2 Position - Type 2 Use on all 4 Way - 2 Position applications
8 SERIES: /8 Ported Air Valves, A & B SERIES: / Ported Air Valves /8 & /, A, B & 8 Series, & Way; & Position Operation to 50 psi Note! Spring return & spring centered models NOT suitable for dry air service.
More informationDirectional Control Valves
echnical Information General Description he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available
More informationMULTIFUNCTION SPOOL VALVES air operated and solenoid air operated G3/4-G1 - ISO 5599/1 subbase-mounted body
MULTIFUNCTION SPOOL VALVES air operated and air operated G/-G - ISO 99/ subbase-mounted body /-/ Series Type ISO size MULTIFUNCTION Multifunction selector The multifunction selector is equipped with pilot
More information% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
4.55 Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 low wattage coil Standard ambient
More informationSolenoid pilot operated spring return inline valves with nonlocking overrides, 120V, 60 Hz, and cablegrip connector
1/4" to 2" Solenoid Pilot ctuated VLVES High flow - Cv of 1.2 to 49.5 Durable, robust construction 1/4" to 2" ports (SPP, PTF, or ISO Rc threads) Wide range of voltages available Four functional types:
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationThe extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).
/2- and 4/2-multi-way valves ; servo-assisted; block assembly or NAMUR flange; DN 4; flow rate: 00 l/min Advantages / Benefits II 2G EEx ia IIC T6 PTB0 ATEX 275 approved Available for block assembly and
More informationSolenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM
More informationDirectional Control Valves. Application. Features. Operation.
Catalog HY14-2500/US Introduction pplication Series D101 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationDirectional Control Valves. Features. Application. Operation
Catalog HY14-2502/US Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage 4-way valves. hey are available in 2 or 3-
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D61VW General Series D61VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Catalog HY14-2500/US Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted
More informationDirectional Control Valves. General Description. Operation. Features
echnical Information Series D101VW General Series D101VW directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are
More informationICO2S - 2/2, 3/2 or 5/2 Exia poppet valves Electromagnetically actuated, solenoid pilot operated
ICOS - /, / or 5/ Exia poppet valves > > Port size: /... / (ISO G/NPT) /... (Flanged) > > Zone 0, Exia solenoid pilot operated valve > > Safety integrity level and > > Reliable and long life, ideal for
More informationVAL-138. Valves. Electrical Details for Solenoid Pilot. Operating Pressure
Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot ctuated ISO 5407- / VDM 24 563 Size 26 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationLow Power. 1.4 W Low Power Solenoid Valves. Brass or Stainless Steel Bodies 1/4" to 1" NPT. Features
.4 W Solenoid Valves Brass or Stainless Steel Bodies /4" to " NPT 4/ Features Moulded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Designed for use in automation
More informationCenter Center Exhaust Pressurized PS-32AS PS-32BS PS-32AD PS-32BD PS-520S PS-520D PS-53CD PS-53ED PS-53PD. Series PS. Function
DIRECTIONL CONTROL VLVES Directional Control Valves PS-SERIES 3/2, 5/2 and 5/3-way Single and double acting control Long lifespan Low energy consumption Standard manual override Wide range of operating
More informationNIFW % # ) Air and Inert Gas Non-Incendive Field Wiring Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT
Air and Inert Gas Non-Incendive Field Wiring Valves Brass, Aluminum, or Stainless Steel Bodies /" to " NPT / 5/ 5/3 Features solenoid enclosures to provide corrosion resistance in harsh environments Designed
More informationMulti Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
More informationSKINNER Intrinsically Safe Series Four-Way
SKINNER Four-Way Two-Position Valves SPECIFICATIONS Mechanical Characteristics Standard Materials of Body Aluminum Seals FKM, NBR. Other diaphragm materials available upon request. Compatible Fluids Air
More informationOperation. D1VW Solenoid Operated Plug-In Conduit Box Style
Introduction pplication hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3-position styles. hey are manifold mounted valves, which conform
More informationDirectional Control Valves. Application. Features. Operation
Catalog HY14-2500/US Introduction pplication Series D81 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or
More informationROSS CONTROLS. Base Mounted Valves. and Serial Bus Communication
ROSS CONTROLS Base Mounted Valves and Serial Bus Communication ISO 15407-1 & 2 ISO 5599/I & /II Serial Communications VLVE TYPE NSI SE Miniature 14 Series Solenoid Pilot Valves Pack VLVE SERIES DESCRIPTION
More informationSeries 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up
More informationVALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
More informationPilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
More information3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals.
8 SERIES /8 Ported Air Valves 1/ Ported Air Valves /8 & 1/ 1, 1A, 1B & 8 Series Note! Spring return & spring centered models NOT suitable for dry air service. Features & Way - Position. Way - &. operator
More informationDirect mounting NAMUR solenoid valves for process valve actuators New Revolutionary Design- Worldwide Patents Pending
Direct mounting NAMUR solenoid valves for process valve actuators New Revolutionary Design- Worldwide Patents Pending The V-Solenoid II Standard Series ATEX EX Series Intrinsically Safe Series ExProof
More information3 Port Solenoid Valve Direct Operated Poppet Type. Body type. Body ported. Manifold. Valve option
Port Solenoid Valve Direct Operated Poppet ype Series V17 Rubber Seal [Option] Compact yet provides a large flow capacity Dimensions (W x H x D) 45 x 89.5 x 45 (Grommet) C:.6 dm /(s bar) (Passage ) Suitable
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
LH SECION Industrial Hydraulic Valves Directional Control, ressure Control, Sandwich, Subplates & Manifolds, ccessories echnical Information General Description Series D61VW directional control valves
More informationGeneral Specifications DRV DRV-Exm DRV-Exd
direct operated, 3-way pressure reducing valve Q max = 8 l/min pressure range = - 5 bar body stainless steel (optional) Description The proportional pressure reducing valve (3-way function) is used to
More informationHigh Pressure Solenoid Valves
High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, Hydrogen & other High Pressure Gases High Pressure Cryogenics Flammable Liquids
More informationV82 series - Redundant valve manifold systems - Compact 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series - Redundant valve manifold systems - Compact oo Safety, oo Availability and oo Safety and Availability > > Compact design - Herion valves > > Exhaust guards as standard > > SIL certified components
More informationPorts. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
More informationBalanced Valve Series Multi-Purpose Direct-Acting Solenoid Valves
Balanced Valve Series Multi-Purpose Direct-Acting Solenoid Valves www.humphrey-products.com Humphrey Products Company P.O. Box 008 Kalamazoo, MI 4900 USA P.69.8.5500 F.69.8.4 BVSa-07 A privately owned
More informationLIMIT SWITCH Axiom - AX
LIMIT SWITCH Axiom - AX with SST Switching Sensors Installation, Maintenance and Operating Instructions (AX33 ) Publication# 10532revB 2 Table of Contents Publication# 10532revB Table Of Contents... Page
More information/2-way piston valves
> > ort size: DN 15... 100 Flange connection, ressure rating N 40 > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > djustable: Damped operation () > > Valve piston
More information86740/ /2-way piston valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > Damped operation > > Valve piston with TFE guide-ring Technical
More informationVAL /4" to 2" Solenoid Pilot Actuated 2/2, 3/2, & 4/2 Inline Valves. Solenoid pilot operated spring return inline valves with nonlocking
1/4" to 2" Solenoid Pilot ctuated VLVES High flow - Cv of 1.2 to 49.5 Durable, robust construction 1/4" to 2" ports (SPP, PTF, or ISO Rc threads) Wide range of voltages available Four functional types:
More informationFor double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring
For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching
More informationControl Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet
More informationMini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves
Catalog LX-530 Mini 1 Compact High Flow and Pneumatic Directional Control Valves FEATURES: 3-port or 5-port bodies Manual, Air Pilot, Solenoid or Mechanical Operators Two-position, Single or Dual Actuation
More information385 & 962 Series The lectroaire valve is a compact, air operated, electrically lectroaire valves can be remotely mounted for control of double acting
Model Number Index Housing Series Type ort Variation Voltage 962 2 001 40 Series Solenoid Operated Housing Type 962 Valve less racket 972* Valve less racket 902 Valve less racket 385 Valve with racket
More informationD07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More informationTechnical Principles of Valves
Technical Principles of Valves Symbols and Circuit Functions Symbol to DIN-ISO 1219 The circuit function illustrations are defined to the DIN-ISO 1219 Standard. These can be used to show other switching
More informationGVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
More informationBUSCHJOST SERIES
c Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recoended. BUSCJOST 82400 SERIES 2/2 - way valves DN 8... DN 50 For neutral gases and liquids
More informationSérie D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US
Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICAIONS D05 Pattern Directional Control Valves Also refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONAC INFORMAION USA Headquarters Dynex/Rivett
More informationK Series 3 Way Direct Acting Balanced Poppet Solenoid Valve
Ex d Ex m IP5 Series 3 Way Direct Acting Balanced Poppet Solenoid Valve DB2S-M2C \ Ex d IIC with Integral Stainless \ Steel Junction Box. \ Valve. \ Manual Override, Option M2. J77072S-M2 \ Ex m II NASS
More informationPilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
More information98025 NAMUR/INLINE 3/2 way poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 NMUR/INLINE / way poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators TÜV-approval based on type examination
More informationVED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES
CONTINENTAL HYDRAULICS VED*M PROPORTIONAL PILOT OPERATED DIRECTIONAL CONTROL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM TOUGH VED*M PROPORTIONAL
More informationDFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...
DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...
More informationLIMIT SWITCH Axiom - AX
LIMIT SWITCH Axiom - AX with AS-Interface (Standard Addressing) Installation, Maintenance and Operating Instructions (AX9 ) 2 Table of Contents Table Of Contents... Page 2 Axiom Model Guide... Page 3 Dimensions
More informationHydraulics 1. Directional Control Valves Series D1M. Features. Application. Operation. D1MW Solenoid Operated Free Lead Wire
ulletin 2544-1/US Introduction pplication arker D1M Series hydraulic directional control valves are high performance, direct operated 4-way valves. hey are available in 2 or 3 position styles. hey are
More informationDirectional Control Valves. Application. Features. Operation. D3W Solenoid Operated Conduit Cavity Style. D3W Solenoid Operated Hirschmann (DIN) Style
Catalog HY14-2500/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way valves, available in 2 or 3-position. hey are manifold mounted which
More informationVALVES. V44/V45 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 26 mm
V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich
More informationVALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
More informationBulletin H-Tech 03 High Pressure Valves Series H
Bulletin H-Tech 03 High Pressure Valves Series H VALVES The H Series Leak-Proof, High-Pressure Valves Versa Products Company has been supplying high quality pneumatic and hydraulic directional control
More informationSolenoid valve VDHT standard BSP (British Standard Pipe)
Technical data sheet standard BSP (British Standard Pipe) danfoss.high-pressurepumps.com 521B1166 / DKCFN.PD.043.A1.02 Index 3. Picture Overview 4. Features 5. Technical data 6. Technical data 7. General
More informationSpecial valves. Series. Solenoids. IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64. Aluminium. Operation. Page no. EEx me IP65.
Special valves Operation Series Page no. Function 2/2 Body material Brass Aluminium Solenoids IP Protection class Explosion proof class IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64 EEx
More informationDirectional Control Valves. Features. Application. Operation
Introduction pplication Series D31 hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and
More informationDirectional Control Valves. General Description. Features. Specifications
Technical Information General Description directional control valves are high-performance, 4-chamber, direct operated, wet armature, solenoid controlled, 3 or 4-way valves. They are available in 2 or 3-position
More informationValvair Sprint TM Pneumatic Valves Solenoid & Pilot-Operated Directional Spool Valves. Catalog VAL-VS-E/USA April 2004
Valvair Sprint TM Pneumatic Valves Solenoid & Pilot-Operated Directional Spool Valves Catalog VAL-VS-E/USA April 2004 ! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS
More informationDirectional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More informationLIMIT SWITCH Axiom - AX
LIMIT SWITCH Axiom - AX with FOUNDATION Fieldbus Installation, Maintenance and Operating Instructions (AX93 ) 2 Table of Contents Table Of Contents... Page 2 Axiom Model Guide... Page 3 Dimensions and
More informationTo order, quote model number from table overleaf, e. g for a DN 25 valve.
2/2-way valves DN 8 to DN 5 For neutral gases and liquid fluids Solenoid actuated, with forced lifting Diaphragm valves Internal threads /4 to G 2 or 1/4 N to 2 N Operating pressure to / 16 bar Description
More informationFunction. Orifice (mm) NBR (Perbunan) 0 EPDM 1 FKM (Viton) 2 FFKM (Kalrez) / O-ring FKM 4
Working from 0 bar up Short switching times Suited for fine vacuum down to 1,33 10-3 mbar Assembled oil and grease-free For a.c. solenoid systems with integrated rectifier (40 to 60 Hz) These solenoid
More informationBERMAD Irrigation. Solenoid Valves S - Series. Water Control Solutions
Solenoid Valves Water Control Solutions Company Profile Experience and proven results have made BERMAD synonymous with water and other fluid control and management. Cutting-edge technology is one of the
More information