Parts Manual E17/E20/H20 Floor Scrubber Disc Traction Drive

Transcription

1 Parts Manual E17/E20/H20 Floor Scrubber Disc Traction Drive

2 Page 2

3 PREFACE Thank you for your purchase of the new industry standard for scrubbers. Minuteman International takes great pride in offering the most dependable, reliable and best value in industrial power sweepers and sweeper / scrubbers. We set the standard. Our Customer Service Department would like to hear from you. If you see any errors, omissions or something that needs clarifi cation in this Parts Catalog please let us know. We are working hard towards continually improving our processes to bring you the best you deserve. Please copy the form below, fi ll out and comment on how you found our catalog. Thank you! The Minuteman International Team Name: Title: Company Name: Address: Country: Type of equipment or model number: Comments: Please return to: Customer Service Manager Minuteman International, Inc. 14N845 U.S. Route 20 Pingree Grove, Illinois USA Phone: (800) tech@minutemanintl.com Page 3

4 Technical Specifications Model E17 / E20 / H20 Traction Drive All models beginning with: E17TD / E20DTD / H20DTD Current (Max) Sound Level Cleaning path width Squeegee width Productivity Working speed Transport Speed Rated voltage Vacuum flow Vacuum waterlift Vacuum power Brush type Brush motor(s) power Number of brushes Brush RPM Aqua-Stop equipped Solution capacity Recovery capacity Working Grade Weight with batteries Weight without batteries Dimensions (LxWxH) Drive Motor Power E17 38 amps 69 dba 17 in (43 cm) 30 in (76 cm) 23,120 ft 2 /hr ( 2,147 m 2 ) 3.1 mph (5 km per hr) 3 mph (4.8 km per hr) 24 volts 65 cfm (110 m 3 /hr) 45 ( 112mbar).60 HP (450 W) Disc 3/4 HP (560W) RPM Coming Soon 12Gal (45 liters) 13 Gal (49 liters) 2% 365 lbs (166 kg) 231 lbs (105 kg) 44.4 x 18.8 x 42.3 (112.8 x 47.8 x cm) 1/5 HP (150W) E20 / H20 40 amps 69 dba / 65.5 dba 20 in (51 cm) 34 in (86 cm) 27,200 ft 2 /hr ( 2,527 m 2 ) 3.1 mph (5 km per hr) 3 mph (4.8 km per hr) 24 volts 65 cfm (110 m3/hr) 45 (112 mbar) / 46 (115 mbar).60 HP (450 W) Disc 3/4 HP (560W) RPM Coming Soon 12 Gal (45 liters) 13 Gal (49 liters) 2% 372 lbs (169 kg) 238 lbs (108 kg) 47.4 x 21.3 x 42.3 (120.4 x cm) 1/5 HP (150W) For Safety When Servicing or Maintaining Machine Stop on level surface. Disconnect the power to the machine by pulling the red Battery Connector located under the recovery tank near the batteries. Avoid moving parts. Do not wear loose jackets, shirts, or sleeves when working on machine. Avoid contact with battery acid. Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries. Do not clean machine with a pressure washer. Authorized personnel must perform repairs and maintenance. Use Minuteman supplied replacement parts.

5 Table of Contents Main Assembly E Main Assembly E17 BOM... 7 Main Assembly E20/H Main Assembly E20/H20 BOM... 9 Traction Drive Base Assembly Traction Drive Base Assembly BOM...11 E17/20 Base Assembly E17/20/H20 Base Assembly BOM Chassis Assembly Chassis Assembly BOM Solenoid Assembly Old Style - Solution Valve Assembly New Style - Solution Valve Assembly Solution Control Handle Assembly Solution Control Handle Assembly BOM Solution Tank Assembly Lift Pedal Stop Assembly Battery Tray Assembly Recovery Tank Assembly Recovery Tank Assembly BOM Handle Assembly Handle Assembly BOM Electrical Box Assembly Electrical Box Assembly BOM Electrical Panel Assembly Vacuum Switch Assembly Electrical Box Cover Assembly Vac Motor Assembly Brush Deck Assembly Brush Deck Assembly BOM Brush Deck Assembly Brush Deck Assembly BOM E17/20 Brush Hub Assembly E17 Rear Squeegee Assembly E17 Rear Squeegee Assembly BOM E20 Rear Squeegee Assembly E20/H20 Rear Squeegee Assembly (Curved) BOM E17 Tension Band Sub-Assembly E20 Tension Band Sub-Assembly Squeegee Mechanism Assembly...45 E17/E20/H20 Squeegee Mechanism Assembly BOM Wiring Diagrams Warranty... 51

6 Main Assembly E17 Page 6

7 Main Assembly E17 BOM ITEM PART NO. QTY DESCRIPTION HOSE, CLEAR VAC W/ 90 CUFF SOLUTION TANK LID ASSY SQUEEGEE LIFT MECH ASSY PAD DRIVER, 17 MM/HAKO FILTER, FILL PORT, ES SQUEEGEE ASSY, 30" (760mm) CURVED CLAMP-CRIMP 185R SS SCR-ST-A 10 X SI PL WSR-WAVE SIX.66 X WSR-FLT.390 X.880 X.062 NYL BLT-SHLD 3/8 X 2.0, 5/ WSR-FLAT SI X.87 X DECAL, E JUMPER CABLE ASSY, RED 4G 12'' (NOT SHOWN) CABLE ASSY, BATTERY E17 (NOT SHOWN) BATTERY, 12V 140AH TD TRAC ORV BASE ASSY-120V CHARGER TD 1 TD BRUSH DECK ASSY 17" W 1 DECAL, MINUTEMAN W/SWOOSHES, GREY SOLUTION TANK LID CHAIN, BEADED SS W/ EYELETS SCR-PAN HD Hl/L06-19 X SI SS 20G GEL BATTERY 12V 100AH 20T BATTERY 12V 105AH WET TROJAN BD BRUSH DRVMAIN ASSY-120V CHARGER 21CE BD BRUSH DRVMAIN ASSY-230V CHARGER PLT 3 BLT- SHLDR 1/2 X 1/2 ZINC PLT W 1 DECAL, MINUTEMAN W/SWOOSHES, WHITE SOLUTION TANK LID CHAIN, BEADED SS W/EYELET S SCR-MC 6-32 X.37 PPH SS BRUSH OPTIONS AQUA STOP BRUSHES PAD RETAINER, FIXED - NOT SHOWN BRUSH, 17 LIGHT-MEDIUM PP.5 A/S, (WHITE) PAD RETAINER, REMOVEABLE - NOT SHOWN BRUSH, 17 LIGHT-MEDIUM A/S K901 (BLACK) BRUSH-DISC, 17 NYLON, BLACK BRUSH, 17 MEDIUM NYLON 600GR. A/S, (GREY) BRUSH-DISC, 17 NYLO-GRIT 80GR GREEN BRUSH, 17 MEDIUM-HEAVY PP.8 A/S (WHITE) BRUSH-DISC 17 SCRUB GRIT II 120GR BRUSH, 17 HEAVY NYLON 180GR. A/S (GRAY) BRUSH, 17 HEAVY-2 NYL 120GR. A/S, GREEN Note: Models with the black tri-lobe brush hub will require the conversion kit part number K-E1720HUB before using the brushes listed above Page 7

8 Main Assembly E20/H20 Page 8

9 Main Assembly E20/H20 BOM ITEM PART NO. QTY DESCRIPTION HOSE, CLEAR VAC W/ 45 CUFF HOSE, PU CLEAR W/ 45 CUFF (CE AND H20) SOLUTION TANK LID ASSY SQUEEGEE LIFT MECH ASSY PAD DRIVER, 20" FILTER, FILL PORT, ES SQUEEGEE ASSY, 34" (860) CURVED CLAMP-CRIMP 185R SS SCR-ST-A 10 X.75 SS WSR-WAVE.37X.68 X WSR-FLT.390 X.880 X.062 NYL BLT-SHLD 3/8 X 2.0, 5/ WSR-FLAT.37 X.87 X DECAL, E DECAL, H JUMPER CABLE ASSY, RED 4G 12" CABLE ASSY, BATTERY E BATTERY, 12V 140AH 18A GEL BATTERY 12V 95AH TD TRAC DRV BASE ASSY-120V CHARGER 19A TD TRAC DRV BASE ASSY-230V CHARGER TD 1 TD BRUSH DECK ASSY 20" W 1 DECAL, MINUTEMAN W/SWOOSHES, WHITE SOLUTION TANK LID CHAIN, BEADED SS W/ EYELETS SCR-PAN HD HI/LO 6-19 X.37SS W 1 DECAL, MINUTEMAN W/SWOOSHES, WHITE SOLUTION TANK LID CHAIN, BEADED SS W/EYELETS SCR-MC 6-32 X.37 PPH SS BRUSH OPTIONS AQUA STOP BRUSHES PAD RETAINER, FIXED - NOT SHOWN BRUSH, 20 LIGHT-MED PP.5 A/S, WHITE PAD RETAINER, REMOVEABLE - NOT SHOWN BRUSH, 20 LIGHT-MEDIUM A/S, K901, BLACK BRUSH, 20" NYLON BRUSH, 20 MEDIUM NYLON 600GR. A/S, GREY BRUSH-DISC, 20" NYLO-GRIT 80GR, GREEN BRUSH, 20 MEDIUM-HEAVY PP.8 A/S, WHITE DISC BRUSH 20", SCRUB GRIT 2, 120GR RED BRUSH, 20 HEAVY NYLON 180GR. A/S, GREY BRUSH, 20 HEAVY-2 NYL 120GR. A/S, GREEN Page 9

10 Traction Drive Base Assembly Page 10

11 Traction Drive Base Assembly BOM BILL OF MATERIAL TD - 120/230 ITEM PART NO QTY DESCRIPTION ITEM PART NO QTY DESCRIPTION TD CHASSIS ASSY, ES SCR-SC 3/8-16 X.62 ST PL BATTERY TRAY ASSY WSR-FLAT 1/4 ID SS E1720 TD HANDLE ASSY WSR-FLAT.37 X 1.12 X LIFT PEDAL WMT WSR- FLAT.25 X 1.01 X VAC MOTOR ASSY WSR-HELICAL # BKT, VAC AREA INSIDE COVER WSR-HELICAL 3/ ELEC BOX TD ASSY 120V COTTER PIN-HAIR 7A ELEC BOX TD ASSY 230V CLEVIS PIN TD ELEC BOX COVER ASSY WSR-FLAT.37 X.87 X KNOB, 3/8-16 STUD, 3 LOBE WSR-FLAT.187 X SOL CONTROL ASSY BOLT-HH 1/4-20X3/4 SS BKT, PWR CORD MOUNT WSR-HELICAL 1/4 SS TD LIFT PEDAL BKT ASSY BLT-HH 3/8-16 X 1 # FOAM COVER, REAR DECAL-NAME PLATE SERIAL FOAM COVER, REAR DECAL-CLEAR LAMINATE 2X FOAM COVER, FRONT KNOB, OVAL TAPERED PEDAL PAD CLIP-WIRE & CORD CLAMP-HOSE 1.75 DIA SOL CNTRL LEVER ASSY NOMINAL STRAIN RELIEF-HEYCO NUT, PUSH-ON WSR CAP, 3/ FITTING, TEE 3/4MPT 1/2 BARB ROD, SOL. CTRL, ES1720 PP HOSE, 1/2 X 42 CLEAR YOKE, 3/16 CLEVIS, 10-32, LONG CRIMP CLAMP 3/4" STEPLESS BASE 1 ES1720 BASE ASSY SCR-MC 1/4-20 X.50 TRUSS STPL Page 11

12 E17/20 Base Assembly Page 12

13 E17/20/H20 Base Assembly BOM BILL OF MATERIAL BASE ITEM PART NO. QTY DESCRIPTION SOLUTION TANK ASSY RECOVERY TANK ASSEMBLY COVER, FRONT PANEL E WASHER-FLAT 1/4 SS WASHER-LOCK #10 SPLIT ZP BLT-SHOULDER 5/16 X.375 LG X 1/4-20 BLK WASHER-BALANCING.187 X SCR-THMS 1/4-20 X.62 SS WASHER-LOCK #10 SPLIT SS WASHER-LOCK 1/4 SPLIT SS SCR-PHMS X.62 ZP SCR-THMS X.50 SS CLAMP-HOSE 1.75 DIA NOMINAL Page 13

14 Chassis Assembly ITEM #6 Page 14

15 Chassis Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION ITEM PART NO. QTY DESCRIPTION BLT-CARR 5/16-18 X 1 ZP WASHER-FLAT 1/4 SS E1720 MAIN FRAME WMT WASHER-FLAT 1/2 X 1.37 X.10 ZP BEARING BLOCK WASHER-FLAT 3/4 X 1.37 X.08 ZP BEARING BLOCK PLATE WASHER-FLAT.390 X.880 X.062 NYL SOLENOID MOUNT ASSY WASHER-FLAT 1/2 X.90 X.064 NYLON DECK SWITCH ASSY WASHER-LOCK 5/16 SPLIT SS 6a BEARING BLOCK/SWITCH PLATE CLEVIS-YOKE, 1/2-20 WITH.375 PIN 6b SCR-RHMS 4-40 X.75 ZP WASHER-FLAT 3/8 X.87 X.06 ZP 6c NUT-HEX 4-40 ZP SCR-HH 1/4-20 X.75, 18-8 SS 6d WASHER-INT LOCK #4 SS SCR-HH 1/4-20 X 1.00 SS 6e SWITCH ASY, MICRO ROLLER SCR-HH 5/16-18 X SS W/PACK/CONDUIT BKT, TRANSAXLE MOUNT NUT-ACORN 1/4-20 SS BASE BKT, TRANSAXLE MOUNT WASHER-LOCK 1/4 SPLIT SS CASTER, 3 1/2" PU WHEEL WASHER-FLAT.56 X 1.06 X.04 SS UPPER LIFT ARM WASHER-FENDER 1/4 X 1.25 X.059 SS DISC DECK LIFT WMT, E WASHER-FLAT.344 X.75 X.06 SS RING-RET EXT.75/20mm HD SCR-HH 1/4-20 X 2.00 ZP GR DRAG CHAIN, SS, 8" W/ RING TRANSAXLE, E V WHEEL, 8X2 PU GROOVED CLIP-CORD KEY-SQUARE 6MM X 45MM PIN-HAIRPIN COTTER 3/ ASSY-SOLUTION VALVE E PIN-CLEVIS 3/8 X RING-RUE.50 ZP NUT-JAM 1/2-20 ZP NUT-HEX 5/16-18 ZP REVERSE LOC NUT-NYLOC M12 X 1.75 ZD CLASS 8 Page 15

16 Solenoid Assembly BILL OF MATERIAL ITEM PART # QTY DESCRIPTION BKT, SOLENOID MOUNT HOSE-WIRE REINF 3/8 X 11" FTG-ADAPTER 1/4 MPT X 1/4 HB BRASS CLAMP-HOSE 5/8 ( ) SS SCR-PHMS 5/16-18 X.50 ZP WASHER-LOCK 5/16 SPLIT ZP DIODE ASY, 1N4007 W/PIGGY VALVE-WATER 24VDC Page 16

17 Old Style - Solution Valve Assembly NO LONGER AVAILABLE ***REPLACING OLD STYLE BRASS SOLUTION VALVE ASSEMBLY WITH PLASTIC SOLUTION VALVE ASSEMBLY WILL REQUIRE THE PURCHASE OF KIT K OLD STYLE - BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BRKT, SOL VALVE MOUNT BALL VALVE, BRASS, 3/8FNPT, CUST HANDLE FTG-ADAPTER 3/8 MPT X 3/8 HB BRASS WASHER-FLAT 3/4 X 1.37 X.08 ZP WASHER-FLAT.689 X 1.06 X.029 SS FTG-ADAPTER 3/8 MPT 1/2 HB BRASS New Style - Solution Valve Assembly NEW STYLE - BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION FILTER-SOLUTION E HOSE- 1/2ID X 1.75" NYLOBRAID HOSE-1/2"ID X 2.375" NYLOBRAID HOSE-WIRE REINF 1/2"ID X 4.25" FTG-ELBOW 90 1/2 HB X 1/2 HB NYLON SOLUTION CNTRL VALVE, WITH BRKT CLAMP-CRIMP 1/2 HOSE Page 17

18 Solution Control Handle Assembly Page 18

19 Solution Control Handle Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION LEVER, SOLUTION CONTROL BRK'T BLT-ELEVATOR 1/4-20 x.75 ZINC BRKT, AQUASTOP SOL CNTRL SCR-PHMS 5/16-18 X.50 ZP NUT-FLANGED WIZZ 1/4-20 ZP WASHER-FLAT 3/8 X 1.00 X.08 ZP WASHER-FLAT 3/8 X 1.00 X.08 ZP WASHER-EXT LOCK 3/8 ZP WASHER-FLAT 1/4 X.75 NYLON WASHER-FLAT #12 X.50 X.065 ZP WASHER-FLAT 1/4 X.75 X.06 ZP WASHER-FLAT 1/2 X.90 X.064 NYLON BLT-SHOULDER 5/16 X.75 LG X 1/4-20 BLK BLT-SHOULDER 1/4 X.313 LG X SS DECAL, AQUASTOP SOLUTION CONTROL KNOB-OVAL TAPERED KNOB-3 SIDED 1/4-20 INSERT BUSHING-FLG.31 X.435 X.325 NYL NUT-NYLOC SS Page 19

20 Solution Tank Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SOLUTION TANK HANDLE MOUNT ASSY, LEFT HANDLE MOUNT ASSY, RIGHT HOOK, DRAIN HOSE WITH TWIST VALVE TOOL CLIP, 1.5" HOSE FITTING, 1/2 MPT 1/2 HB BRASS WSR-FLAT.37 X 1.12 X WSR-HELICAL 3/ SCR-MC TR HD X.50 SS BLT-HH 3/8-16 X 3/4 #5 Page 20

21 Lift Pedal Stop Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BKT, PEDAL STOP CLIP, FOR 1/2" ID HOSE SCR-MC 4-40 X 1.25 STL Z SCR-MC FL HD 8-32 X.50 BRS NUT-HEX WSR-INT LOCK # DECAL, REMOVE SPLASH GUARD SWITCH ASY, MICRO ROLLER W/PACK/CONDUIT Page 21

22 Battery Tray Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BATTERY BOX BKT, SPACER FOR BATTERIES O RING " HOSE NOZZLE BODY-ELBOW NOZZLE BODY LOCKNUT HOSE SHUT-OFF CLAMP SCR-MC 1/4-20 X.50 TRUSS STPL WSR-FLT.31x.75x..06ST CRIMP CLAMP 140R Page 22

23 Recovery Tank Assembly Page 23

24 Recovery Tank Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION ES1720 RECOVERY TANK ES1720 VACUUM MANIFOLD LID, ES GASKET, ES1720 LID HINGE, RECOVERY TANK FLOAT, SCREENED CABLE, REC TANK SCR-HH 1/4-20 X 1.25 ZP GR 5 FULL THRD SCR-HH 1/4-20 X 1.50 ZP GR I NUT-FLANGED WIZZ 5/16-18 ZP WASHER-FLAT 1/4 X 1.00 X.06 ZP WASHER-LOCK 1/4 SPLIT ZP SCR-THMS 1/4-20 X.62 SS WASHER-LOCK 1/4 SPLIT SS CLAMP-HOSE 1.75 DIA NOMINAL DRAIN HOSE ASSY, RECOVERY TANK REPLACEMENT O-RING CAP Page 24

25 Handle Assembly Page 25

26 Handle Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION ES1720 HANDLE BAIL PLATE WMT RH BAIL PLATE WMT LH ES1720 LEAF SPRING ES1720 BAIL, HANDLE SPACER, 5/16OD X 17GA, ALUM HANDLE PIVOT JAW SCR-MC RD HD X.37 STL SCR-MC 4-40 X 1.25 STL Z NUT, HEX ST PL NUT-NYLOC NUT-HEX WSR, FLAT# WSR-HELICAL # WSR-NYLON.22 X.45 X WSR-INT LOCK # SCR-MC X.62 STLZ TR HD SWITCH ASY, MICRO ROLLER W/PACK/CONDUIT CABLE ASY, 5 COND 18G TD Page 26

27 Electrical Box Assembly Page 27

28 Electrical Box Assembly BOM BILL OF MATERIAL /230-C ITEM PART NO. QTY DESCRIPTION NUT-HEX 1/4-20 ZP DOUBLE SERRATED ELEC BOX BOTTOM WMT ELEC BOX TOP WMT VAC SWITCH ASSY WELDMENT-VAC LEVER FOAM TAPE, 1/2" SQ X 16.5" SQUEEGEE CABLE ASSY SPRING-COMP.502 X.6 X 1 ZINC SCR-PHMS 8-32 X ZP SCR-THMS 1/4-20 X.50 ZP NUT-NYLOC 8-32 ZP NUT-HEX 5/16-18 ZP REVERSE LOC WASHER-FLAT 1/4 ZP WASHER-FLAT 3/8 X 1.00 X.08 ZP WASHER-FLAT 5/16 X 1.25 X.05 ZP WASHER-LOCK 1/4 SPLIT ZP WASHER-FLAT 20 X.45 X.048 NYLON SCR-PHMS X 1.25 SS WASHER-INT TOOTH LOCK #10 SS SCR-RHMS X.37 ZP CIRCUIT BREAKER-BOOT I-DRIVE, 24V 70A PM CONTROL (SEE NOTES) WIRE ASY, MACHINE-BATTERY E ELECTRICAL PANEL ASY, E1720TD MOUNT RING SPRING-EXT.25OD X 2" F.L. MUSIC BUSH -HEYCO 1-5/8 X 2-1/8 X 29/ B CABLE TIE LARGE CHRGR, SIGNET HBF NEMA 5-15 PLUG see below 29CE CHRGR, SIGNET HBF IEC C14 see below CAP, SAFETY NUT COVER M8 Charger Settings Setting Battery Type 1 Wet 115 AH Group 27, Minuteman Part # AGM 100 AH Group 27 OEM Minuteman Part # Crown AGM Only 2 Wet 140 AH Group 31 Minuteman Part # Crown and Trojan 130 AH 2 AGM 135 AH Group 31 Minuteman Part # Crown AGM Only 3 All Group 31 GEL and Non Minuteman AGM 135 AH 4 All Group 27 GEL, Minuteman Trojan 102AH Overdrive AGM and Non Minuteman AGM 100 AH 5 to 0 No Additional Functions Page 28

29 Electrical Panel Assembly BILL OF MATERIAL ITEM PART NO. REQ D DESCRIPTION PANEL, RELAY MOUNT NUT -NYLOC WSR-HELICAL # SCR-MC X.25 ST PL CIRCUIT BREAKER-20AMP 2-T ERMIN CIRCUIT BREAKER-30AMP PUSH BUT DIODE ASY, 1N4007 W/PIGGY (NOT SHOWN) CIRCUIT BREAKER-4.0AMP PUSHBUT RELAY, 2 POLE CURT IS (1720) RELAY, 1 POLE CURT IS (1720) BRACKET, RELAY & WIRE ASY, 10G RED 13" (NOT SHOWN) WIRE ASY, 10G RED 7" (NOT SHOWN) WIRE HARNESS, E1720TD MAIN (NOT SHOWN) CAP, SAFET Y NUT COVER M CAP, SAFET Y NUT COVER M RELAY, 24VDC 2 POLE 100A (HAKO) Page 29

30 Vacuum Switch Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BKT, VAC SWITCH MOUNT VAC SWITCH COVER SCR-RHMS 4-40 X.75 ZP NUT-HEX 4-40 ZP WASHER-INT LOCK #4 SS SWITCH ASY, MICRO ROLLER W/PACK/CONDUIT Page 30

31 Electrical Box Cover Assembly BILL OF MATERIAL ITEM PART # QTY DESCRIPTION ITEM PART # QTY DESCRIPTION TD COVER WMT GAUGE-BATTERY TRUCHARGE PGDT 36VDC GASKET, CB OUTLINE POTENTIOMETER ASSY, SPEED CON- TROL GASKET, CHARGER CORD PLATE INDICATOR, BATTERY CHARGE STATUS DECAL, DASHBOARD ES1720TD KEYSWITCH ASY, KEYSWITCH + HAR- NESS DECAL, CHARGE STATUS, SOLUTION SWITCH, DPDT ON/OFF/ON (SCV 2426) CTRL DECAL, TD CIRC BKRS, ES GASKET-FOR 2 POLE ROCKER SWITCHES DECAL, DIAGNOSTIC CODES, NAR- ROW KNOB-SPEED CONTROL Page 31

32 Vac Motor Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION VAC MOUNT WMT HOSE, STRETCH 13", 90 CUFF EDGE TRIM,.063 X 3.0, BLACK FOAM COVER FRONT 1, 1/2 THICK FOAM COVER FRONT 2, 1/2" THICK FOAM TAPE, 1/2" SQ X 16.5" CLAMP-CRIMP 1.75" OD SCR-HI/LO 10 X.625 BLACK ZINC WASHER-FLAT #10 X.50 ZP DECAL - WARNING, DO NOT PICK UP (NOT SHOWN) VAC MOTOR ASY, 24V PERIF BYPASS Page 32

33 17 Brush Deck Assembly Page 33

34 17 Brush Deck Assembly BOM BILL OF MATERIAL TD ITEM PART NO. QTY DESCRIPTION A 6 WASHER-FLAT.390 X.687 ZP WELDMENT-DECK ANGLE ADJUST PLATE MOTOR MOUNT HOSE-NYLO REINF 3/8 X 21.25" SPACER, HUB BKT, E1720 DECK MOUNT RT BKT, E1720 DECK MOUNT LEFT " BRUSH DECK WMT ROLLER WHEEL CLAMP-HOSE 5/8 ( ) SS SCR-BHSCS 3/8-24 X.75 ZP SCR-HH 3/8-24 X.62 ZP GR NUT-NYLOC 3/8-16 ZP WASHER-FLAT 1/4 SS WASHER-FLAT 3/8 X 1.12 X WASHER-LOCK 5/16 SPLIT ZP WASHER-LOCK 3/8 SPLIT ZP PIN-CLEVIS 3/8 X.750 ZP PIN-COTTER 1/8 X 1 SS WASHER-FENDER 3/8 X 1.12 X.10 ZP HARD WASHER-FLAT 3/8 X.87 X.06 ZP SCR-THMS 1/4-20 X.62 SS SCR-HH M X 20 ZP GRADE WASHER-FLAT 13/16 X 1.25 X.08 ZP MOTOR, 24VDC PM 600W SCR-SHCS M6X30 SS, ISO WSR-FLT 6.4X12X1.6, SS DIN FITTING, WATER NOZZLE W/ MOUNT HOLES DRIVE HUB, PLASTIC, 3-LOBE MCH 1 HUB BASE MACHINED Page 34

35 20 Brush Deck Assembly Page 35

36 20 Brush Deck Assembly BOM BILL OF MATERIAL TD ITEM PART NO. QTY DESCRIPTION A 6 SPECIAL WASHER DECK ANGLE ADJUST WMT PLATE, MOTOR MOUNT HOSE-NYLO REINF 3/8 X 22.5" BKT, E1720 DECK MOUNT RT BKT, E1720 DECK MOUNT LEFT DECK COVER WMT, 20" E20 FLOATING BRUSH DECK SKIRT ROLLER WHEEL CLAMP-HOSE 5/8 ( ) SS SCR-BHSCS 3/8-24 X.75 ZP SCR-HH 3/8-24 X.62 ZP GR NUT-NYLOC 3/8-16 ZP WASHER-FLAT 1/4 SS WASHER-FLAT 3/8 X 1.12 X WASHER-WAVE.37 X.68 X WASHER-LOCK 3/8 SPLIT ZP PIN-CLEVIS 3/8 X.750 ZP WASHER-FENDER 3/8 X 1.12 X.10 ZP HARD WASHER-FLAT 3/8 X.87 X.06 ZP SCR-THMS 1/4-20 X.62 SS SCR-HH M X 20 ZP GRADE WASHER-FLAT 13/16 X 1.25 X.08 ZP MOTOR, 24VDC PM 600W SCR-SHCS M6X30 SS, ISO BLT-HH FLG M8X1.25X20 PRECOTE, ZD WSR-FLT 6.4X12X1.6, SS DIN FITTING, WATER NOZZLE W/ MOUNT HOLES DRIVE HUB, PLASTIC, 3-LOBE MCH 1 HUB BASE MACHINED Page 36

37 NOTES Page 37

38 E17/20 Brush Hub Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SCR-SHCS M6X30 SS, ISO WSR-FLT 6.4X12X1.6, SS DIN DRIVE HUB, PLASTIC 3 LOBE MCH 1 BASE, DRIVE HUB WITH KEYWAY Page 38

39 E17 Rear Squeegee Assembly Page 39

40 E17 Rear Squeegee Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SQUEEGEE BLADE, FRONT 30" (760), 4MM PU SQUEEGEE BLADE, REAR 30" (760), 4MM PU STRAP WMT, FRT RT - 30" (760) STRAP WMT, REAR LEFT - 30" (760) STRAP WMT, REAR RT - 30" (760) SPRING, COMP.4 ID X.5FL SS STRAP ASM W/ LATCH, FRONT, 30" SQG " SQUEEGEE BASE ASM SCR-HH M X 20 SS WASHER-FLAT M10.5 X 30 X 2.5 SS WSR-FLT M8.4 X 16 X 1.6 A2 SS 140HV DIN STAR HANDLE, M10, BLACK FIXED CASTER WASHER-FLAT 8.3 x 22 x 1.00mm STAINLESS ROLLER - PLASTIC, 100mm DIA. (4") BUMPER, 30" SQG EDGE TRIM, 5/16 X 8" BLACK WASHER-FLAT 1/4 SS WASHER-FLAT.63 X 1.12 X BUSHING-.435 X.625 X.50 ZINC NUT-ACORN 1/4-20 SS SCR-BHSCS 1/4-20 X 2.25 SS WASHER-FLAT.344 X.75 X.06 SS BUSHING-FLG.31 X.435 X.325 NYL PIN-ROLL 1/8 X.50 ZINC Page 40

41 E20 Rear Squeegee Assembly Page 41

42 E20/H20 Rear Squeegee Assembly (Curved) BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SQUEEGEE BLADE, FRONT 34" (860) 4MM PU SQUEEGEE BLADE, REAR 34" (860), 4MM PU STRAP WMT, FRONT RT - 34" (860) SQG STRAP WMT, REAR LEFT - 34" (860) SQG WELD-STRAP REAR RT - 34" (860) SQG SPRING, COMP.4 ID X.5FL SS STRAP W/ LATCH, FRONT LEFT, 34" SQG " SQUEEGEE BASE ASM SCR-HH M X 20 SS WASHER-FLAT M10.5 X 30 X 2.5 SS WSR-FLT M8.4 X 16 X 1.6 A2 SS 140HV DIN STAR HANDLE, M10, BLACK FIXED CASTER WASHER-FLAT 8.3 x 22 x 1.00mm STAINLESS ROLLER - PLASTIC, 100mm DIA. (4") BUMPER, 34" SQG EDGE TRIM, 5/16 X 10" BLACK WASHER-FLAT 1/4 SS WASHER-FLAT.63 X 1.12 X BUSHING-.435 X.625 X.50 ZINC NUT-ACORN 1/4-20 SS SCR-BHSCS 1/4-20 X 2.25 SS WASHER-FLAT.344 X.75 X.06 SS BUSHING-FLG.31 X.435 X.325 NYL PIN-ROLL 1/8 X.50 ZINC Page 42

43 E17 Tension Band Sub-Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SPACER, 5/16OD X 17GA, ALUM STRAP WMT, FRT LEFT-30" (760) LEVER, SCR-MC M5 X 25 SS DIN BLT-EYE M5 X 40 SS NUT- HEX, M5, SS DIN NUT- HEX, M5 NYLON LOCK, SS DIN PIN, THD Page 43

44 E20 Tension Band Sub-Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SPACER, 5/16OD X 17GA, ALUM LEVER, STRAP WMT, FRONT LEFT SCR-MC M5 X 25 SS DIN BLT-EYE M5 X 40 SS NUT- HEX, M5, SS DIN NUT- HEX, M5 NYLON LOCK, SS DIN PIN, THD Page 44

45 Squeegee Mechanism Assembly Page 45

46 E17/E20/H20 Squeegee Mechanism Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BKT, SQG HINGE SQUEEGEE MOUNT WMT UPPER SQG LINK LOWER SQG LINK SPRING, TORSION 1720 SQG PIN, 3/8 X 3.0, SQG STRAP STRAP, 9" PU, BLACK CLIP-TOOL 1.5 INCH HOSE SPRING-RETURN.313 X.438 X 2.93 SS SCR-FHMS 8-32 X.37 BRASS NUT-JAM 5/16-18 ZP WASHER-FLAT 1/4 SS WASHER-FLAT.406 X.75 X.035 SS WASHER-WAVE.37 X.68 X WASHER-FLAT 1/2 X.90 X.064 NYLON PIN-CLEVIS 3/8 X 2 1/4 ZP RET RING-E EXT RET RING-E EXT ROD-THD 5/16-18 X 3.25 SS PIN-CLEVIS 1/2 X 2.25 WITH HOLE NUT-WING 5/16-18 SS SCR-HH 1/4-20 X.75, 18-8 SS NUT-HEX 1/4-20 SS NUT-NYLOC 5/16-18 SS WASHER-LOCK 1/4 SPLIT SS WASHER-FLAT.56 X 1.06 X.04 SS WASHER-FLAT.344 X.75 X.06 SS RING-RUE 3/ COLLAR-THREADED CLAMP 5/16-18X5/16-BK OX Page 46

47

48

49

50 E1720TD PART REFERENCE LIST Schematic REFERENCE # COMPONENT NAME PART NUMBER M1 (optional) PUMP, WATER (KIT K-E1720P) M2 MOTOR, BRUSH M3 MOTOR, VACUUM ASSEMBLY M3 (model specific) MOTOR, VACUUM ASSEMBLY (H20 only) M4 TRANSAXLE Y1 SOLENOID VALVE, WATER K1 RELAY, MAIN K2 RELAY, BRUSH MOTOR K3 RELAY, VACUUM CB1 CIRCUIT BREAKER 4.0A, CONTROL CB2 CIRCUIT BREAKER 30A, BRUSH MOTOR CB3 CIRCUIT BREAKER 20A, VACUUM MOTOR CB4 CIRCUIT BREAKER 20A, TRANSAXLE S1 KEYSWITCH S2A SWITCH, BRUSH MOTOR (at motor) S2B SWITCH, BRUSH MOTOR (handle) S3 SWITCH, VACUUM MOTOR S4 SWITCH, TRANSAXLE (handle) S5 SWITCH, DIRECTION S6 SWITCH, BRUSH UNLOAD S7 SWITCH, SOLENOID S8 (optional) SWITCH, PUMP- OFF AISLE WAND (KIT K-1720P) A1 CONTROLLER, I-DRIVE CSI CHARGER STATUS INDICATOR HM (optional) HOUR METER (KIT K-E1720HM) BC (model specific) BATTERY CHARGER 115VAC (battery type specific) (-2 or G-4) BC (model specific) BATTERY CHARGER 230VAC (battery type specific) (-2 or G-4) G1 BATTERY, 12V 140AH (2 REQUIRED) G1 (optional) BATTERY, GEL 12V 100AH (2 REQUIRED) D1 DIODE, MAIN RELAY Part of K1 D2 DIODE ASM, BRUSH MOTOR RELAY D3 DIODE ASM, VACUUM MOTOR RELAY D4 DIODE ASM, SOLENOID VALVE REFERENCE # CONNECTOR FUNCTION PART # -female PART # -male X1 KEYSWITCH (S1) X2 SWITCH, BRUSH MOTOR (S2B) X3 CHARGER STATUS INDICATOR (CSI) Part of CSI Part of BC X4 SWITCH, VACUUM (S3) X5 MOTOR, VACUUM (M3) X6 BATTERY CONNECTOR X7 SWITCH, BRUSH MOTOR (S2A) X8 SWITCH, BRUSH UNLOAD (S6) X9 SOLENOID VALVE, WATER (Y1) X10 OPERATOR HANDLE CABLE X11 OPERATOR HANDLE CABLE X12 KEYSWITCH (S1)- MAIN RELAY COIL (K1) X13 BATTERY CHARGER (BC)- INTERNAL RELAY X14 BATTERY CHARGER (BC)-INTERNAL RELAY X15 SOLENOID (Y1) /HOUR METER CONNECTION (HM) X16 SOLENOID (Y1) /HOUR METER CONNECTION (HM) X17 (optional) OPTIONAL HOUR METER (HM) WIRE X18 (optional) OPTIONAL HOUR METER (HM) WIRE X19 BATTERY GAUGE (BDI) Part of BDI X20 SPEED POT ASSEMBLY (R1) X21 SWITCH, TRANSAXLE (S4) X22 OPERATOR HANDLE CABLE: X23 I-DRIVE HARNESS: Part of A X24 TRANSAXLE (M4) X25 I-DRIVE (A1) TO VACUUM SWITCH (S3) X26 I-DRIVE (A1) TO VACUUM SWITCH (S3) X27 I-DRIVE (A1) TO VACUUM RELAY-CONTACT X28 (optional) SWITCH, TOGGLE WATER PUMP (S8) X29 (optional) PUMP, OFF AISLE WAND (M1) Last Updated 01/05/10

51 Warranty

52

53 Excellence Meets Clean Minuteman is a Full Line Manufacturer of Sweepers and Scrubbers, for Industrial Facilities. 14N845 U.S. Route 20, Pingree Grove, IL USA Phone (800) A Member of the Hako Group E17/E20/H20 Floor Scrubber - Traction Drive Rev G 08/16