Parts Manual E17/E20/H20 Floor Scrubber Disc Brush Drive

Transcription

1 Parts Manual E17/E20/H20 Floor Scrubber Disc Brush Drive

2 PREFACE Thank you for your purchase of the new industry standard for scrubbers. Minuteman International takes great pride in offering the most dependable, reliable and best value in industrial power sweepers and sweeper / scrubbers. We set the standard. Our Customer Service Department would like to hear from you. If you see any errors, omissions or something that needs clarifi cation in this Parts Catalog please let us know. We are working hard towards continually improving our processes to bring you the best you deserve. Please copy the form below, fi ll out and comment on how you found our catalog. Thank you! The Minuteman International Team Name: Title: Company Name: Address: Country: Type of equipment or model number: Comments: Please return to: Customer Service Manager Minuteman International, Inc. 14N845 U.S. Route 20 Pingree Grove, Illinois USA Phone: (800) tech@minutemanintl.com Page 2

3 Technical Specifications Model E17 / E20 / H20 All Models Beginning with: E17BD / E20BD / H20BD Current (Max) Sound Level Cleaning path width Squeegee width Theoretical productivity Working speed Rated voltage Vacuum flow Vacuum waterlift Vacuum power Brush type Brush motor(s) power Number of brushes Brush RPM Aqua-Stop equipped Solution capacity Recovery capacity Working Grade Weight with batteries Weight without batteries Dimensions (LxWxH) E17BD 32 amps 69 dba 17 in (43 cm) 30 in (76 cm) 17,000 ft 2 /hr ( 1,579 m 2 ) 2.3 mph (3.7 km per hr) 24 volts 65 cfm (110 m 3 /hr) 45 inches ( 112mbar).60 HP (450 W) Disc 3/4 HP (560W) RPM Available 12Gal (45 liters) 13 Gal (49 liters) 2% 306 lbs (139 kg) 196 lbs (89 kg) 44.4 x 18.8 x 42.3 (112.8 x 47.8 x cm) E20BD / H20BD 32 amps 69 dba / 65.5 dba 20 in (51 cm) 34 in (86 cm) 20,000 ft 2 /hr ( 1,858 m 2 ) 2.3 mph (3.7 km per hr) 24 volts 65 cfm (110 m3/hr) 45 inches (112mbar) / 46 INCHES (115mbar).60 HP (450 W) Disc 3/4 HP (560W) RPM Available 12 Gal (45 liters) 13 Gal (49 liters) 2% 313 lbs (142 kg) 203lbs (92 kg) 47.4 x 21.3 x 42.3 (120.4 x cm) For Safety When Servicing or Maintaining Machine Stop on level surface. Disconnect the power to the machine by pulling the red Battery Connector located under the recovery tank near the batteries. Avoid moving parts. Do not wear loose jackets, shirts, or sleeves when working on machine. Avoid contact with battery acid. Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries. Do not clean machine with a pressure washer. Authorized personnel must perform repairs and maintenance. Use Minuteman supplied replacement parts.

4

5 Table of Contents Technical Specifi cations... 3 E17 Main Assembly... 6 E20/H20 Main Assembly... 8 Brush Drive Base Assembly E17/20/H20 Base Assembly Chassis Assembly Recovery Tank Assembly Solution Tank Assembly Lift Pedal Stop Assembly Battery Tray Assembly Old Style - Solution Valve Assembly New Style - Solution Valve Assembly Solution Control Handle Assembly Solution Control Handle Assembly BOM Handle Assembly Electrical Box Assembly Electrical Panel Assembly Electrical Panel Assembly BOM Vacuum Switch Assembly Electrical Box Cover Assembly Vac Motor Assembly Brush Deck Assembly Brush Deck Assembly E17/20/H20 Brush Hub Assembly E17 Rear Squeegee Assembly (Straight) E17 Rear Squeegee Assembly (Curved) E20/H20 Rear Squeegee Assembly (Curved) E17 Tension Band Sub-Assembly E20/H20 Tension Band Sub-Assembly E17/E20/H20 Squeegee Mechanism Assembly Kit K-E1720S - Water Solenoid Valve Wiring Diagrams Warranty... 57

6 E17 Main Assembly Page 6

7 E17 Main Assembly BOM ITEM PART NO. QTY DESCRIPTION HOSE, CLEAR VAC W/ 45 CUFF SOLUTION TANK LID ASSY BRUSH DECK ASSY 17" " PAD DRIVER - SEE BELOW FOR RETAINER FILTER, FILL PORT, ES BD SQUEEGEE LIFT MECH ASSY 6KT SQUEEGEE LIFT MECH ASSY SQUEEGE ASY COMP 20" STR 7KT SQUEEGEE ASSY BD 30" (760) CLAMP-CRIMP 185R SS SCR-ST-A 10 X.75 SS NUT-NYLOC 5/ NUT-NYLOC 3/8-16 X 1/2 NUT WSR-WAVE.37X.68 X WSR-FLT.390 X.880 X.062 NYL WSR-FLAT.506 X.9 X.064 NYL BLT-SHLD 3/8 X 2.0, 5/ WSR-FLAT.37 X.87 X DECAL, E JUMPER CABLE ASSY, RED 4G 12" CABLE ASSY, BATT ERY E BATTERY, 12V 115AH 20G GEL BATTERY 12V 100AH 20T BATTERY 12V 105AH WET TROJAN BD BRUSH DRVMAIN ASSY-120V CHARGER 21CE BD BRUSH DRVMAIN ASSY-230V CHARGER PLT 3 BLT- SHLDR 1/2 X 1/2 ZINC PLT W 1 DECAL, MINUTEMAN W/SWOOSHES, WHITE SOLUTION TANK LID CHAIN, BEADED SS W/EYELET S SCR-MC 6-32 X.37 PPH SS BRUSH OPTIONS AQUA STOP BRUSHES PAD RETAINER, FIXED - NOT SHOWN BRUSH, 17 LIGHT-MEDIUM PP.5 A/S, (WHITE) PAD RETAINER, REMOVEABLE - NOT SHOWN BRUSH, 17 LIGHT-MEDIUM A/S K901 (BLACK) BRUSH-DISC, 17 NYLON, BLACK BRUSH, 17 MEDIUM NYLON 600GR. A/S, (GREY) BRUSH-DISC, 17 NYLO-GRIT 80GR GREEN BRUSH, 17 MEDIUM-HEAVY PP.8 A/S (WHITE) BRUSH-DISC 17 SCRUB GRIT II 120GR BRUSH, 17 HEAVY NYLON 180GR. A/S (GRAY) BRUSH, 17 HEAVY-2 NYL 120GR. A/S, GREEN Note: Models with the black tri-lobe brush hub will require the conversion kit part number K-E1720HUB before using the brushes listed above Page 7

8 E20/H20 Main Assembly Page 8

9 E20/H20 Main Assembly BOM ITEM PART NO. QTY DESCRIPTION HOSE, CLEAR VAC W/ 45 CUFF, E HOSE, PU RECOVERY, CLEAR, H SOLUTION TANK LID ASSY BRUSH DECK ASSY 20" " PAD DRIVER - 230V-SEE BELOW FOR RETAINER SQUEEGEE LIFT MECH ASSY FILTER, FILL PORT, ES SQUEEGEE, 34" (860) CLAMP-CRIMP 185R SS SCR-ST-A 10 X.75 SS NUT-NYLOC 5/ NUT-NYLOC 3/8-16 X 1/2 NUT WSR-WAVE.37X.68 X WSR-FLT.390 X.880 X.062 NYL WSR-FLAT.506 X.9 X.064 NYL BLT-SHLD 3/8 X 2.0, 5/ WSR-FLAT.37 X.87 X DECAL, E DECAL, H JUMPER CABLE ASSY, RED 4G 12" CABLE ASSY, BATTERY E BATT ERY, 12V 115AH 20G GEL BATTERY 12V 100AH BD BRUSH DRV MAIN ASSY-120VCHARGER 21CE BD BRUSH DRV MAIN ASSY-230VCHARGER PLT 3 BLT- SHLDR 1/2 X 1/2 ZINC PLT W 1 DECAL, MINUTEMAN W/SWOOSHES, WHITE SOLUTION TANK LID CHAIN, BEADED SS W/EYELETS SCR-MC 6-32 X.37 PPH SS BRUSH OPTIONS AQUA STOP BRUSHES PAD RETAINER, FIXED - NOT SHOWN BRUSH, 20 LIGHT-MED PP.5 A/S, WHITE PAD RETAINER, REMOVEABLE - NOT SHOWN BRUSH, 20 LIGHT-MEDIUM A/S, K901, BLACK BRUSH, 20" NYLON BRUSH, 20 MEDIUM NYLON 600GR. A/S, GREY BRUSH-DISC, 20" NYLO-GRIT 80GR, GREEN BRUSH, 20 MEDIUM-HEAVY PP.8 A/S, WHITE DISC BRUSH 20", SCRUB GRIT 2, 120GR RED BRUSH, 20 HEAVY NYLON 180GR. A/S, GREY BRUSH, 20 HEAVY-2 NYL 120GR. A/S, GREEN Page 9

10 Brush Drive Base Assembly Page 10

11 Brush Drive Base Assembly BOM BILL OF MATERIAL BD - 120/230 ITEM PART NO QTY DESCRIPTION ITEM PART NO QTY DESCRIPTION E1720 BD CHASSIS ASSY SCR-BHSCS 3/8-16 X.625 ZP BATTERY TRAY ASSY, ES WASHER-FLAT 1/4 SS BD HANDLE ASSY, E WASHER-FLAT 3/8 X 1.12 X LIFT PEDAL WMT WASHER-FLAT 1/4 X 1.00 X.06 ZP VAC MOTOR ASSY WASHER-LOCK #10 SPLIT ZP BKT, VAC AREA INSIDE COVER WASHER-LOCK 3/8 SPLIT ZP ELEC BOXBD ASSY 120V PIN-COTTER.06 X.75 7CE ELEC BOXBD ASSY 230V PIN-CLEVIS 3/16 X BD ELEC BOXCOVER ASSY WASHER-FLAT 3/8 X.87 X.06 ZP KNOB, 3/8-16 STUD, 3LOBE WASHER-BALANCING.187 X SOL CONTROL ASSY SCR-HH 1/4-20 X.75, 18-8 SS BKT, PWR CORD MOUNT, 5/ WASHER-LOCK 1/4 SPLIT SS HOLE LIFT PEDAL STOP ASSY SCR-HH 3/8-16 X 1.00 ZP GR FOAM COVER W/ ADHESIVE DECAL-NAME PLATE MODEL ID FOAM COVER REAR 2, 1/2" DECAL-CLEAR LAMINATE 2X3 THICK FOAM COVER FRONT 2, 1/2" KNOB-OVAL TAPERED THICK PEDAL PAD CLIP-WIRE & CORD CLAMP-HOSE 1.75 DIA NOMI SOLUTION CTRL LEVER ASSY NAL STRAIN RELIEF NUT, PUSH-ON WSR CAP, 3/ FTG-TEE 3/4 MPT X 1/2 HB SOLUTION CONTROL ROD NYLON HOSE, CLEAR 1/2 ID X 39.75" YOKE, 3/16 CLEVIS X THD CLAMP-CRIMP 3/4" OD STEP BASE 1 E1720 BASE ASSY LESS SCR-THMS 1/4-20 X.50 ZP Page 11

12 E17/20/H20 Base Assembly Page 12

13 E17/20/H20 Base Assembly BOM BILL OF MATERIAL BASE ITEM PART NO. QTY DESCRIPTION SOLUTION TANK ASSY RECOVERY TANK ASSEMBLY COVER, FRONT PANEL E WASHER-FLAT 1/4 SS WASHER-LOCK #10 SPLIT ZP BLT-SHOULDER 5/16 X.375 LG X 1/4-20 BLK WASHER-BALANCING.187 X SCR-THMS 1/4-20 X.62 SS WASHER-LOCK #10 SPLIT SS WASHER-LOCK 1/4 SPLIT SS SCR-PHMS X.62 ZP SCR-THMS X.50 SS CLAMP-HOSE 1.75 DIA NOMINAL Page 13

14 Chassis Assembly ITEM #7 Page 14

15 Chassis Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BLT-CARR 5/16-18 X 1 ZP E1720 MAIN FRAME WMT BKT, WHEEL, E1720BD ROD,.5" E1720 AXLE BEARING BLOCK BEARING BLOCK PLATE DECK SWITCH ASSY 7a BEARING BLOCK/SWITCH PLATE 7b SCR-RHMS 4-40 X.75 ZP 7c NUT-HEX 4-40 ZP 7d WASHER-INT LOCK #4 SS 7e SWITCH ASY, MICRO ROLLER W/PACK/CONDUIT CASTER, 3 1/2" PU WHEEL WHEEL, 8X2X.5ID, 75A W/ GROOVES UPPER LIFT ARM DISC DECK LIFT WMT, E ASSY-SOLUTION VALVE E BUSHING-FLG.502 X.627 X.375 OILITE RING-RUE.50 ZP NUT-NYLOC 5/16-18 ZP WASHER-FLAT 1/4 SS WASHER-FLAT.390 X.880 X.062 NYL WASHER-FLAT 1/2 X.90 X.064 NYLON WASHER-LOCK 5/16 SPLIT SS CLEVIS-YOKE, 1/2-20 WITH.375 PIN WASHER-FLAT 3/8 X.87 X.06 ZP SCR-HH 1/4-20 X.75, 18-8 SS SCR-HH 5/16-18 X SS WASHER-LOCK 1/4 SPLIT SS WASHER-FLAT.56 X 1.06 X.04 SS WASHER-FENDER 1/4 X 1.25 X.059 SS WASHER-FLAT.344 X.75 X.06 SS SCR-HH 1/4-20 X 2.00 ZP GR CLIP-CORD PIN-HAIRPIN COTTER 3/ PIN-CLEVIS 3/8 X NUT-JAM 1/2-20 ZP Page 15

16 Recovery Tank Assembly Page 16

17 Recovery Tank Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION ES1720 RECOVERY TANK HSP E17/E20 REC TANK HOSPITAL VERSION ES1720 VACUUM MANIFOLD HSP MANIFOLD, VAC - GREEN, HOSPITAL VERSION LID, ES GASKET, ES1720 LID HINGE, RECOVERY TANK FLOAT, SCREENED CABLE, REC TANK SCR-HH 1/4-20 X 1.25 ZP GR 5 FULL THRD SCR-HH 1/4-20 X 1.50 ZP GR I NUT-FLANGED WIZZ 5/16-18 ZP WASHER-FLAT 1/4 X 1.00 X.06 ZP WASHER-LOCK 1/4 SPLIT ZP SCR-THMS 1/4-20 X.62 SS WASHER-LOCK 1/4 SPLIT SS CLAMP-HOSE 1.75 DIA NOMINAL DRAIN HOSE ASSY, RECOVERY TANK REPLACEMENT O-RING CAP Page 17

18 Solution Tank Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SOLUTION TANK HANDLE MOUNT ASSY, LEFT HANDLE MOUNT ASSY, RIGHT HOOK, DRAIN HOSE WITH TWIST VALVE TOOL CLIP, 1.5" HOSE FITTING, 1/2 MPT 1/2 HB BRASS WSR-FLAT.37 X 1.12 X WSR-HELICAL 3/ SCR-MC TR HD X.50 SS BLT-HH 3/8-16 X 3/4 #5 Page 18

19 Lift Pedal Stop Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BKT, PEDAL STOP CLIP, FOR 1/2" ID HOSE SCR-MC 4-40 X.75 PAN HD SCR-MC FL HD 8-32 X.50 BRS NUT-HEX WSR-INT LOCK # DECAL, REMOVE SPLASH GUARD SWITCH ASY, MICRO ROLLER W/PACK/CONDUIT Page 19

20 Battery Tray Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BATTERY BOX BKT, SPACER FOR BATTERIES O RING " HOSE NOZZLE BODY-ELBOW NOZZLE BODY LOCKNUT HOSE SHUT-OFF CLAMP SCR-MC 1/4-20 X.50 TRUSS STPL WSR-FLT.31x.75x..06ST CRIMP CLAMP 140R Page 20

21 Old Style - Solution Valve Assembly NO LONGER AVAILABLE ***REPLACING OLD STYLE BRASS SOLUTION VALVE ASSEMBLY WITH PLASTIC SOLUTION VALVE ASSEMBLY WILL REQUIRE THE PURCHASE OF KIT K OLD STYLE - BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BRKT, SOL VALVE MOUNT BALL VALVE, BRASS, 3/8FNPT, CUST HANDLE FTG-ADAPTER 3/8 MPT X 3/8 HB BRASS WASHER-FLAT 3/4 X 1.37 X.08 ZP WASHER-FLAT.689 X 1.06 X.029 SS FTG-ADAPTER 3/8 MPT 1/2 HB BRASS New Style - Solution Valve Assembly NEW STYLE - BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION FILTER-SOLUTION E HOSE- 1/2ID X 1.75" NYLOBRAID HOSE-1/2"ID X 2.375" NYLOBRAID HOSE-WIRE REINF 1/2"ID X 4.25" FTG-ELBOW 90 1/2 HB X 1/2 HB NYLON SOLUTION CNTRL VALVE, WITH BRKT CLAMP-CRIMP 1/2 HOSE Page 21

22 Solution Control Handle Assembly Page 22

23 Solution Control Handle Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION LEVER, SOLUTION CONTROL BRK'T BLT-ELEVATOR 1/4-20 x.75 ZINC BRKT, AQUASTOP SOL CNTRL SCR-PHMS 5/16-18 X.50 ZP NUT-FLANGED WIZZ 1/4-20 ZP WASHER-FLAT 3/8 X 1.00 X.08 ZP WASHER-FLAT 3/8 X 1.00 X.08 ZP WASHER-EXT LOCK 3/8 ZP WASHER-FLAT 1/4 X.75 NYLON WASHER-FLAT #12 X.50 X.065 ZP WASHER-FLAT 1/4 X.75 X.06 ZP WASHER-FLAT 1/2 X.90 X.064 NYLON BLT-SHOULDER 5/16 X.75 LG X 1/4-20 BLK BLT-SHOULDER 1/4 X.313 LG X SS DECAL, AQUASTOP SOLUTION CONTROL KNOB-OVAL TAPERED KNOB-3 SIDED 1/4-20 INSERT BUSHING-FLG.31 X.435 X.325 NYL NUT-NYLOC SS Page 23

24 Handle Assembly NOTE APPLY LOCTITE TO ALL SCREWS ( ) Page 24

25 Handle Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION HANDLE, ES BAIL PLATE WMT RH BAIL PLATE WMT LH LEAF SPRING, ES ES1720 BAIL, HANDLE SPACER, 5/16OD X 17GA, ALUM HANDLE PIVOT JAW SCR-PHMS X.37 ZP SCR-RHMS 4-40 X.75 ZP NUT-HEX ZP NUT-NYLOC ZP NUT-HEX 4-40 ZP WASHER-FLAT #10 X.50 ZP WASHER-LOCK #10 SPLIT ZP WASHER-FLAT 20 X.45 X.048 NYLON WASHER-INT LOCK #4 SS SCR-THMS X.62 ZP SWITCH ASY, MICRO ROLLER W/PACK ABLE ASY, 5 COND 18G CONSOLE Page 25

26 Electrical Box Assembly For machines with Curved Squeegee Page 26

27 Electrical Box Assembly BOM BILL OF MATERIAL ITEM PART # QTY DESCRIPTION ITEM PART # QTY DESCRIPTION NUT-HEX 1/4-20 ZP DOUBLE WASHER-LOCK 1/4 SPLIT ZP SERRATED ELEC BOX BOTTOM WMT WASHER-FLAT 20 X.45 X.048 NYLON ELEC BOX TOP WMT SCR-PHMS X 1.25 SS VAC SWITCH ASSY WASHER-INT TOOTH LOCK #10 SS WELDMENT-VAC LEVER CIRCUIT BREAKER-BOOT FOAM TAPE, 1/2" SQ X 16.5" ELECTRICAL PANEL ASY, E1720BD SQUEEGEE CABLE ASSY (curved squeegees) SPRING-COMP.502 X.6 X 1 ZINC WIRE ASY, MACHINE BATTERY E MOUNT RING SCR-THMS 1/4-20 X.50 ZP SPRING-EXT.25OD X 2" F.L. MUSIC NUT-NYLOC 8-32 ZP BUSH -HEYCO 1-5/8 X 2-1/8 X 29/ B NUT-HEX 5/16-18 ZP RE- VERSE LOC CABLE TIE LARGE WASHER-FLAT 1/4 ZP WASHER-FLAT 3/8 X 1.00 X.08 ZP WASHER-FLAT 5/16 X 1.25 X.05 ZP CHARGER, SIGNET HBF (120) see below CHARGER, SIGNET HBF (230) see below CAP, SAFETY NUT COVER M8 Charger Settings Setting Battery Type 1 Wet 115 AH Group 27, Minuteman Part # AGM 100 AH Group 27 OEM Minuteman Part # Crown AGM Only 2 Wet 140 AH Group 31 Minuteman Part # Crown and Trojan 130 AH 2 AGM 135 AH Group 31 Minuteman Part # Crown AGM Only 3 All Group 31 GEL and Non Minuteman AGM 135 AH 4 All Group 27 GEL, Minuteman Trojan 102AH Overdrive AGM and Non Minuteman AGM 100 AH 5 to 0 No Additional Functions Page 27

28 Electrical Panel Assembly Page 28

29 Electrical Panel Assembly BOM BILL OF MATERIAL ITEM PART NO. REQ D DESCRIPTION PANEL, RELAY MOUNT NUT -NYLOC WSR-HELICAL # SCR-MC X.25 ST PL CIRCUIT BREAKER-20AMP 2-T ERMIN CIRCUIT BREAKER-30AMP PUSH BUT DIODE ASY, 1N4007 W/PIGGY (NOT SHOWN) CIRCUIT BREAKER-4.0AMP PUSHBUT RELAY, 2 POLE CURT IS (1720) RELAY, 1 POLE CURT IS (1720) BRACKET, RELAY & WIRE ASY, 10G RED 13" (NOT SHOWN) WIRE ASY, 10G RED 7" (NOT SHOWN) WIRE HARNESS, E1720BD MAIN (NOT SHOWN) CAP, SAFET Y NUT COVER M CAP, SAFET Y NUT COVER M RELAY, 24VDC 2 POLE 100A (HAKO) Page 29

30 Vacuum Switch Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BKT, VAC SWITCH MOUNT VAC SWITCH COVER SCR-RHMS 4-40 X.75 ZP NUT-HEX 4-40 ZP WASHER-INT LOCK #4 SS SWITCH ASY, MICRO ROLLER W/PACK/CONDUIT Page 30

31 For machines with Straight Squeegee For machines with Straight Squeegee Replace Cable Assembly and reference these additional parts ITEM PART NO. QTY DESCRIPTION ITEM PART NO. QTY DESCRIPTION LOCTITE WASHER-FLAT 1/4 ZP BKT, LOWER BUSHING MOUNT WASHER-LOCK 1/4 SPLIT ZP CABLE, SQUEEGEE LIFT ASSY, E17BD NUT-NYLOC M6 X 1.0 ZP PIPE, 3/4 X 3.0" SCHD 40 PVC SCR-HH M6-1.0 X 20 ZP CLASS SCR-THMS 1/4-20 X.50 ZP BUSHING, CABLE GUIDE, HAKO Page 31

32 Electrical Box Cover Assembly Page 32

33 Electrical Box Cover Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION ELEC BOX, COVER, WMT GASKET, CB OUTLINE GASKET, CHARGER CORD PLATE DECAL, 1720 BD ELEC BOX DECAL, 1720 BD DASHBOARD DECAL, BD CIRC BKRS VOLT METER CHARGE STATUS INDICATOR KEYSWITCH ASY, KEYSWITCH + WIR Page 33

34 Vac Motor Assembly Page 34

35 Vac Motor Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION VAC MOUNT WMT HOSE, STRETCH 13", 90 CUFF EDGE TRIM,.063 X 3.0, BLACK FOAM COVER FRONT 1, 1/2 THICK FOAM COVER FRONT 2, 1/2" THICK FOAM TAPE, 1/2" SQ X 16.5" CLAMP-CRIMP 1.75" OD SCR-HI/LO 10 X.625 BLACK ZINC WASHER-FLAT #10 X.50 ZP DECAL - WARNING, DO NOT PICK UP (NOT SHOWN) VAC MOTOR ASY, 24V PERIF BYPASS VAC MOTOR ASSY, HOSP VERSION Page 35

36 17 Brush Deck Assembly Page 36

37 17 Brush Deck Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION A 6 WASHER-FLAT.390 X.687 ZP WELDMENT-DECK ANGLE ADJUST PLATE MOTOR MOUNT HOSE-WIRE REINF 3/8 X 31" SPACER, HUB BKT, E1720 DECK MOUNT RT BKT, E1720 DECK MOUNT LEFT E17 DECK SKIRT " BRUSH DECK WMT ROLLER WHEEL CLAMP-HOSE 5/8 ( ) SS SCR-BHSCS 3/8-24 X.75 ZP SCR-HH 3/8-24 X.62 ZP GR NUT-NYLOC 3/8-16 ZP WASHER-FLAT 1/4 SS WASHER-FLAT 3/8 X 1.12 X WASHER-WAVE.37 X.68 X WASHER-LOCK 3/8 SPLIT ZP PIN-CLEVIS 3/8 X.750 ZP WASHER-FENDER 3/8 X 1.12 X.10 ZP HARD WASHER-FLAT 3/8 X.87 X.06 ZP SCR-THMS 1/4-20 X.62 SS NUT-NYLOC 1/4-20 SS SCR-HH M X 20 ZP GRADE WASHER-FLAT 13/16 X 1.25 X.08 ZP MOTOR, 24VDC PM 600W RING-RUE 3/ SCR-SHCS M6X30 SS, ISO BLT-HH FLG M8X1.25X20 PRECOTE, ZD WSR-FLT 6.4X12X1.6, SS DIN FITTING, WATER NOZZLE W/ MOUNT HOLES DRIVE HUB, PLASTIC, 3-LOBE MCH 1 HUB BASE MACHINED Page 37

38 20 Brush Deck Assembly Page 38

39 20 Brush Deck Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION A 6 WASHER-FLAT.390 X.687 ZP WELDMENT-DECK ANGLE ADJUST PLATE MOTOR MOUNT HOSE-WIRE REINF 3/8 X 31" E20 BRUSH DECK PLATE BKT, E1720 DECK MOUNT RT BKT, E1720 DECK MOUNT LEFT DECK COVER WMT, 20" E20 FLOATING BRUSH DECK SKIRT ROLLER WHEEL CLAMP-HOSE 5/8 ( ) SS SCR-BHSCS 3/8-24 X.75 ZP SCR-HH 3/8-24 X.62 ZP GR NUT-NYLOC 3/8-16 ZP WASHER-FLAT 1/4 SS WASHER-FLAT 3/8 X 1.12 X WASHER-WAVE.37 X.68 X WASHER-LOCK 3/8 SPLIT ZP PIN-CLEVIS 3/8 X.750 ZP WASHER-FENDER 3/8 X 1.12 X.10 ZP HARD WASHER-FLAT 3/8 X.87 X.06 ZP SCR-THMS 1/4-20 X.62 SS SCR-HH M X 20 ZP GRADE WASHER-FLAT 13/16 X 1.25 X.08 ZP MOTOR, 24VDC PM 600W SCR-SHCS M6X30 SS, ISO BLT-HH FLG M8X1.25X20 PRECOTE, ZD WSR-FLT 6.4X12X1.6, SS DIN FITTING, WATER NOZZLE W/ MOUNT HOLES DRIVE HUB, PLASTIC, 3-LOBE MCH 1 HUB BASE MACHINED Page 39

40 E17/20/H20 Brush Hub Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SCR-SHCS M6X30 SS, ISO WSR-FLT 6.4X12X1.6, SS DIN DRIVE HUB, PLASTIC 3 LOBE MCH 1 BASE, DRIVE HUB WITH KEYWAY Page 40

41 E17 Rear Squeegee Assembly (Straight) BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SQUEEGEE CASTING ASY SQUEEGEE MOUNT BKT SQUEEGEE BLADE 200 GUM ADJUSTING NUT 17B/E NYLON SQUEEGEE INSERT SQUEEGEE BUMPER WHEEL SCR-MC 8-32 X 1" ST PL - PH WHEEL ASSY Page 41

42 E17 Rear Squeegee Assembly (Curved) Page 42

43 E17 Rear Squeegee Assembly (Curved) BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION STRAP WMT, FRT RT - 30" (760) STRAP WMT, REAR LEFT - 30" (760) STRAP WMT, REAR RT - 30" (760) SQUEEGEE-FRONT BLADE 30", 1/8 PU SQUEEGEE-REAR BLADE 30", 1/8 PU SPRING, COMP.4 ID X.5FL SS STRAP ASM W/ LATCH, FRONT, 30" SQG " SQUEEGEE BASE ASM SCR-HH M X 20 SS WASHER-FLAT M10.5 X 30 X 2.5 SS WSR-FLT M8.4 X 16 X 1.6 A2 SS 140HV DIN STAR HANDLE, M10, BLACK FIXED CASTER WASHER-FLAT 8.3 x 22 x 1.00mm STAINLESS ROLLER - PLASTIC, 100mm DIA. (4") BUMPER, 30" SQG EDGE TRIM, 5/16 X 8" BLACK WASHER-FLAT 1/4 SS WASHER-FLAT.63 X 1.12 X BUSHING-.435 X.625 X.50 ZINC NUT-ACORN 1/4-20 SS SCR-BHSCS 1/4-20 X 2.25 SS WASHER-FLAT.344 X.75 X.06 SS BUSHING-FLG.31 X.435 X.325 NYL PIN-ROLL 1/8 X.50 ZINC Page 43

44 E20/H20 Rear Squeegee Assembly (Curved) Page 44

45 E20/H20 Rear Squeegee Assembly (Curved) BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION STRAP WMT, FRONT RT - 34" (860) SQG STRAP WMT, REAR LEFT - 34" (860) SQG WELD-STRAP REAR RT - 34" (860) SQG SQUEEGEE-FRONT BLADE 34", 1/8 PU SQUEEGEE-REAR BLADE 34", 1/8 PU SPRING, COMP.4 ID X.5FL SS STRAP W/ LATCH, FRONT LEFT, 34" SQG CASTING, SQG BODY 34" (860MM) SCR-HH M X 20 SS WASHER-FLAT M10.5 X 30 X 2.5 SS WSR-FLT M8.4 X 16 X 1.6 A2 SS 140HV DIN STAR HANDLE, M10, BLACK FIXED CASTER WASHER-FLAT 8.3 x 22 x 1.00mm STAINLESS ROLLER - PLASTIC, 100mm DIA. (4") BUMPER, 34" SQG EDGE TRIM, 5/16 X 10" BLACK WASHER-FLAT 1/4 SS WASHER-FLAT.63 X 1.12 X USHING-.435 X.625 X.50 ZINC NUT-ACORN 1/4-20 SS SCR-BHSCS 1/4-20 X 2.25 SS WASHER-FLAT.344 X.75 X.06 SS BUSHING-FLG.31 X.435 X.325 NYL PIN-ROLL 1/8 X.50 ZINC Page 45

46 E17 Tension Band Sub-Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SPACER, 5/16OD X 17GA, ALUM STRAP WMT, FRT LEFT-30" (760) LEVER, SCR-MC M5 X 25 SS DIN BLT-EYE M5 X 40 SS NUT- HEX, M5, SS DIN NUT- HEX, M5 NYLON LOCK, SS DIN PIN, THD Page 46

47 E20/H20 Tension Band Sub-Assembly BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION SPACER, 5/16OD X 17GA, ALUM LEVER, STRAP WMT, FRONT LEFT SCR-MC M5 X 25 SS DIN BLT-EYE M5 X 40 SS NUT- HEX, M5, SS DIN NUT- HEX, M5 NYLON LOCK, SS DIN PIN, THD Page 47

48 E17/E20/H20 Squeegee Mechanism Assembly Page 48

49 E17/E20/H20 Squeegee Mechanism Assembly BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BKT, SQG HINGE SQUEEGEE MOUNT WMT UPPER SQG LINK LOWER SQG LINK SPRING, TORSION 1720 SQG PIN, 3/8 X 3.0, SQG STRAP STRAP, 9" PU, BLACK CLIP-TOOL 1.5 INCH HOSE SPRING-RETURN.313 X.438 X 2.93 SS SCR-FHMS 8-32 X.37 BRASS NUT-JAM 5/16-18 ZP WASHER-FLAT 1/4 SS WASHER-FLAT.406 X.75 X.035 SS WASHER-WAVE.37 X.68 X WASHER-FLAT 1/2 X.90 X.064 NYLON PIN-CLEVIS 3/8 X 2 1/4 ZP RET RING-E EXT RET RING-E EXT ROD-THD 5/16-18 X 3.25 SS PIN-CLEVIS 1/2 X 2.25 WITH HOLE NUT-WING 5/16-18 SS SCR-HH 1/4-20 X.75, 18-8 SS NUT-HEX 1/4-20 SS NUT-NYLOC 5/16-18 SS WASHER-LOCK 1/4 SPLIT SS WASHER-FLAT.56 X 1.06 X.04 SS WASHER-FLAT.344 X.75 X.06 SS RING-RUE 3/ COLLAR-THREADED CLAMP 5/16-18X5/16-BK OX Page 49

50 Kit K-E1720S - Water Solenoid Valve BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION BKT, BD SOLENOID MOUNT FITTING BRASS - 3/8 DBL BARB X 1/4MPT HOSE-NYLO REINF 3/8 X 9" CLAMP-CRIMP 185R SS SCR-MC 5/16-18 X WSR-HELICAL 5/ DIODE ASY, 1N4007 W/PIGGY WATER VALVE 24VDC BILL OF MATERIAL - ITEM PART NO. QTY DESCRIPTION SCR-MC 4-40 X 1.25 STL Z NUT-HEX WSR-INT LOCK # SWITCH ASY, MICRO ROLLER W/PACK/CONDUIT HARNESS, SOLENOID KIT E1720BD Page 50

51 Wiring Diagrams

52

53

54 E1720BD PART REFERENCE LIST Schematic REFERENCE # COMPONENT NAME PART NUMBER M1 (optional) PUMP, WATER (KIT K-E1720P) M2 MOTOR, BRUSH M3 MOTOR, VACUUM ASSEMBLY M3 (model specific) MOTOR, VACUUM ASSEMBLY (H20 only) Y1 (optional) SOLENOID VALVE, WATER (KIT K-E1720S) K1 RELAY, MAIN K2 RELAY, BRUSH MOTOR K3 RELAY, VACUUM CB1 CIRCUIT BREAKER 4.0A, CONTROL CB2 CIRCUIT BREAKER 30A, BRUSH MOTOR CB3 CIRCUIT BREAKER 20A, VACUUM MOTOR S1 KEYSWITCH S2A SWITCH, BRUSH MOTOR (at motor) S2B SWITCH, BRUSH MOTOR (handle) S3 SWITCH, VACUUM MOTOR S6 SWITCH, BRUSH UNLOAD S7 (optional) SWITCH, SOLENOID (KIT K-1720S) S8 (optional) SWITCH, PUMP- OFF AISLE WAND (KIT K-1720P) CSI CHARGER STATUS INDICATOR HM (optional) HOUR METER (KIT K-E1720HM) BC (model specific) BATTERY CHARGER 115VAC (battery type specific) (-1 or G-4) BC (model specific) BATTERY CHARGER 230VAC (battery type specific) (-1 or G-4) G1 BATTERY, 12V 105AH (2 REQUIRED) G1 (optional) BATTERY, GEL 12V 100AH (2 REQUIRED) N1 FERRITE, BRUSH MOTOR N2 FERRITE, VACUUM MOTOR D1 DIODE, MAIN RELAY Part of K1 D2 DIODE ASM, BRUSH MOTOR RELAY D3 DIODE ASM, VACUUM MOTOR RELAY D4 (optional) DIODE ASM, SOLENOID VALVE (KIT K-E1720S) REFERENCE # CONNECTOR FUNCTION PART # -female PART # -male X1 KEYSWITCH (S1) X2 SWITCH, BRUSH MOTOR (S2B) X3 CHARGER STATUS INDICATOR (CSI) Part of CSI Part of BC X4 SWITCH, VACUUM (S3) X5 MOTOR, VACUUM (M3) X6 BATTERY CONNECTOR X7 SWITCH, BRUSH MOTOR (S2A) X8 SWITCH, BRUSH UNLOAD (S4) X9 SOLENOID VALVE, WATER (Y1) X10 OPERATOR HANDLE CABLE X11 OPERATOR HANDLE CABLE X12 KEYSWITCH (S1)- MAIN RELAY COIL (K1) X13 BATTERY CHARGER (BC)- INTERNAL RELAY X14 BATTERY CHARGER (BC)-INTERNAL RELAY X15 SOLENOID (Y1) /HOUR METER CONNECTION (HM) X16 SOLENOID (Y1) /HOUR METER CONNECTION (HM) X17 OPTIONAL HOUR METER (HM) WIRE X18 OPTIONAL HOUR METER (HM) WIRE X28 (optional) SWITCH, TOGGLE WATER PUMP (S8) X29 (optional) PUMP, OFF AISLE WAND (M1) Last Updated 01/07/10

55 Page 55

56

57 Warranty

58 Excellence Meets Clean Minuteman is a Full Line Manufacturer of Sweepers and Scrubbers, for Industrial Facilities. 14N845 U.S. Route 20, Pingree Grove, IL USA Phone (800) A Member of the Hako Group # Rev N 08/16