Parts Manual Max Ride 20 Floor Scrubber Disc Brush Drive

Transcription

1 Parts Manual Max Ride 20 Floor Scrubber Disc Brush Drive

2 PREFACE Thank you for your purchase of the new industry standard for scrubbers. Minuteman International takes great pride in offering the most dependable, reliable and best value in industrial power sweepers and sweeper / scrubbers. We set the standard. Our Customer Service Department would like to hear from you. If you see any errors, omissions or something that needs clarifi cation in this Parts Catalog please let us know. We are working hard towards continually improving our processes to bring you the best you deserve. Please copy the form below, fi ll out and comment on how you found our catalog. Thank you! The Minuteman International Team Name: Title: Company Name: Address: Country: Type of equipment or model number: Comments: Please return to: Customer Service Manager Minuteman International, Inc. 14N845 U.S. Route 20 Pingree Grove, Illinois USA Phone: (800) tech@minutemanintl.com Page 2

3 Technical Specifications Model Max Ride 20 Models: MR20DQP, MR20DQPG, MR20DQPINT, MR20DQPT, MR20DSQP, MR20DSQPG, MR20DSQPINT, MR20DSQPT Model MAX Ride 20 Scrub Head Type Disc Scrub Path 20 in (53 cm) Soluo apacity 18 gal (68L) Recovery apacity 18 gal (68L) Max Speed 3.1 mph (5 kh) Max Producvity s. h (2527 s m h) Actual Producvity s.. h (205 s m h) Brush Pressure lang Lck Brush Speed Brush Motor a Vacuum Motor 550 as Vacuum Airo 6 cm (32.L sc) Vacuum aterli 68 H2O (1717 mm H2O) Soud Pressure 68 a ater lo.5 gpm (1.7 L min) Mi TurAroud Aisle idth 50.5 (1283 mm) Maximum Ramp limbi 2% Sueeee idth 25 (635mm) Machie Voltae 2 D Poer Source ay (2) h Baery harer On a Maximum Ru Time 33.5 hs. imesios Sueeee eiht ithout Baeries eiht ith Baeries Approvals P Proteco lass 7.5 L H (1206mm 68mm 113mm) 32 ls (155 kg) ln 61 ls (313 kg) ll ln an 10 H ay pack n For Safety When Servicing or Maintaining Machine Stop on level surface. Disconnect the power to the machine by pulling the red Battery Connector located under the recovery tank near the batteries. Avoid moving parts. Do not wear loose jackets, shirts, or sleeves when working on machine. Avoid contact with battery acid. Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries. Do not clean machine with a pressure washer. Authorized personnel must perform repairs and maintenance. Use Minuteman supplied replacement parts. Page 3

4 Table of Contents Technical Specifi cations... 3 Frame Group (Pg 1 of 2)... 6 Frame Group (Pg 2 of 2)... 7 Wheel Group Tower Group Tank Group (Pg 1 of 3) Tank Group (Pg 2 of 3) Tank Group (Pg 3 of 3) Steering Column Group Scrub Head Group Scrub Head Lift Group Squeegee Group Squeegee Lift Group Wiring Diagrams Warranty Page 4

5 Notes Page 5

6 Frame Group (Pg 1 of 2) Page 6

7 Frame Group (Pg 2 of 2) Page 7

8 Frame Group BOM (Pg 1 of 2) BILL OF MATERIAL ITEM PART # QTY DESCRIPTION ITEM PART # QTY DESCRIPTION HOSE, NYLON 1/2 X 4.5 IN CAM - PLATE, LIMIT SWITCH, SCRUB- DECK PAD DRIVER, 20" FTG-ELBOW 90 ST 3/8 MPT x 3/8 FPT BRASS BATTERY BAR ASSY, BREATHER CAP W LANYARD BOX-BATTERY-MAX FTG-ADAPTER 3/8 MPT X 3/8 HB BRASS RETAINER-BATTERY BAR FTG-GARDEN ST 1/2 HB PP WHEEL DRIVE GROUP 20" & 26" FTG-ELBOW 90 3/8 MPT X 1/2 HB PP BLOCK, SLIDE CLAMP-CRIMP 1/2 HOSE SCR-FHSCS 5/16-18 X 5/8 SS HOSE, 1/2 ID X 45", CLEAR BALL BEARING 35MM X 62MM OD X CLAMP-HOSE 5/8 ( ) SS 14MM W ROLLER, BUMPER, 2.5 DIA CATCH, PARKING BRAKE HOSE-VAC, CLEAR 1.50"ID X NUT-NYLOC M SS LONG WHEEL - ASSY, IDLER, 254 x 80 W/ WASHER-FLAT M12 ZP BRGS SCRUB HEAD GROUP PIN-CLEVIS 1/2 X 4.50 ZP WELDMENT,FLOOR PLATE RISER SCR-PHMS 6-32 X.50 ZP 20" SCRUB HEAD LIFT GROUP SCR-PHMS X.37 ZP MOUNT, SOLUTION VALVE SCR-RHMS 4-40 X.75 ZP MOUNT, HAND VALVE SCR-PHMS 4-40 X 1.25 ZP SPACER, BEARING SCR-THMS 1/4-20 X 2.50 SS MOUNT, SCRUB HEAD RH 20" SCR-HH 1/4-20 X 1.25 ZP GR 5 FULL THRD MOUNT, SCRUB HEAD LH 20" SCR-HH 5/16-18 X.62 ZP GR WELDMENT, FRAME, 20" NUT-NYLOC 6-32 ZP VALVE- BALL 1/2 FPT X 1/2 HB NUT-NYLOC 1/4-20 ZP FILTER - 1/2 MPT X 1/2 HB NUT-JAM 1/4-20 ZP NYLOC FTG-ELBOW STREET 90 1/ NUT-HEX 4-40 ZP MPTX1/2FPT BLKPP PLATE - MTG - BALL VALVE AND WASHER-FLAT 1/4 SS FILTER PLATE, LIMIT SW PEDAL WASHER-FLAT 1/4 ZP TREAD, ANTI-SKID, RISER 20" WASHER-FLAT 5/16 X 1.25 X.05 ZP TREAD, ANTI-SKID, FRAME 20" WASHER-LOCK 5/16 SPLIT ZP BUSHING-FLG,.50 x.62 x.31 LG WASHER-INT TOOTH LOCK #10 ZP OILITE BRACKET - MTG, LIMIT SWITCH, SCRUBDECK WASHER-INT LOCK #4 SS Page 8

9 Frame Group BOM (Pg 2 of 2) BILL OF MATERIAL ITEM PART # QTY DESCRIPTION ITEM PART # QTY DESCRIPTION SCR-THMS 1/4-20 X 1.50 SS PIN-HAIRPIN COTTER 3/ WASHER-LOCK 1/4 SPLIT SS CLAMP-HOSE 1.00 NOM SCR-HH 1/4-20 X.75 ZP CLAMP-CABLE 11/16" DIA SCR-HH M X 30 SS CLAMP-HOSE 1.25 NOM SCR-HH M X 16 SS FULL THRD FTG-REDUCER 3/8 FPT X 1/4 MPT TUBING,.50 ID X 18.5 IN BEARING-MAIN BROOM TUBING,.50 ID X 22 IN PIN-CLEVIS 3/8 x ZP CONNECTOR-SB175 RED HOUSING RING-RUE 3/ CBL ASSY- BATT. JMPR, 4G RED 12" NUT-JAM 3/8-16 ZP NYLOC BATT. CABLE, RED 4AWG SB NUT-NYLOC M6 X 1.0 ZP CLASS BATT. CABLE, BLACK 4AWG SB NUT-NYLOC M10 X 1.5 ZD CLASS VALVE-WATER 24VDC WASHER-FLAT M6.4 X 12 X 1.6 ZP ACTUATOR - 40MM STROKE- 750 N WASHER-FLAT M10.5 X 20 X 2 ZP FORCE TERM SWITCH ASY, MICRO ROLLER W/ SHAFT CONNECTOR PACK/CONDUIT SWITCH, MICRO.96" ROLLER ARM BALL VALVE HORN / BACK UP ALARM, 9-48VDC PLT 3 BLT-SHLDR 1/2 X 1/2 LG X 3/ PEDAL ASSY, THROTTLE, FLOOR MTG 25, IEC BATTERY OPTIONS MODEL PART NO. DESCRIPTION MR20DQPG, MR20DSQPG BATTERY 12V 140AH OVERDRIVE 12AGM MR20DQPT, MR20DSQPT BATTERY WET 12V 130AH TROJAN MR20DQP, MR20DQPINT BATTERY, 12V 115 AH WET MR20DSQP, MR20DSQPINT BATTERY, 12V 140AH WET SPORT VERSIONS ONLY ITEM PART NO. QTY DESCRIPTION ITEM PART NO. QTY DESCRIPTION A COVER, REAR 20" E BLT-HH M6 X 1.0 X 12 STL ZD 8.8 B LATCH-RUBBER F SC-BHCS W/ FLANGE M6 X 1.0 X SS C SCR-HH M X 25 ZP CLASS 8.8 G WASHER-FLAT M6.4 X 12 X 1.6 ZP D BUMPER-RUBBER 1/4 ID X 1/8 THK Page 9

10 Wheel Group Page 10

11 Wheel Group BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION NOTES A 2 BEARING SPROCKET, ROLLER CHAIN 35FB13-5/8"BORE SHOWN IN TOWER GROUP GEAR-MOTOR, TRACTION, 24VDC 700W, ASI WASHER, END-OF-SHAFT, 3/8 FL HD BALL BEARING 35MM X 62MM OD X 14MM W SHOWN IN FRAME GROUP CHAIN - ROLLER #35-23 LINKS CHAIN - ROLLER #40-31 LINKS NUT, COUPLING, 1/4-20 X 7/8 ZINC WELDMENT, STEERING RING DISC, STEERING PLT SPACER, BEARING SHOWN IN FRAME GROUP SPACER, BEARING WELDMENT, FORK SHAFT, TRACTION WHEEL SPROCKET - CHAIN, 40B19 MINIMUM BORE SPROCKET - CHAIN, 40B18 3/4" BORE SLEEVE, SPACER,.755 ID 1.25 OD.321 LG SLEEVE, SPACER,.755 ID 1.25 OD.216 LG COVER - CHAIN, TRACTION KEY-6mm X 6mm X KEY-3/16 X 3/16 X 7/ KEY-STEPPED, 3/16 X 6MM X 1.0" SCR-SHCS M X 16 ZP SCR-PHMS X.37 ZP SCR-SHCS 1/4-20 X 1.00 SS SCR-SHCS 5/16-24 X 1.00 BLL OX SCR-SET 1/4-20 X.62 BLK OX CP NUT-NYLOC M10 x 1.25 ZP WASHER-LOCK 1/4 SPLIT, HIGH-COLLAR, SS WASHER-FLAT 1/4 SS WASHER-FLAT 5/16 X.688 ZP WASHER-FLAT 3/8 X.812 X.0625 ZP SCR-FHSCS 3/8-24 X 1.00 ZP WASHER-LOCK 1/4 SPLIT SS COLLAR, CLAMP 2-PIECE, 11/16 B x 1/2" W CHAIN MASTER LINK # CHAIN MASTER LINK # BEARING-MAIN BROOM SHOWN IN FRAME GROUP NUT-NYLOC 5/16-24 ZP WHEEL, 200 X 45 X 19 ID, URETHANE MCH 4 FLANGE MACHINED Page 11

12 Tower Group Page 12

13 Tower Group BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION A 1 BEARING BEARING, SPHERICAL 5/8"ID X 1.187"OD SPROCKET, ROLLER CHAIN 35FB13-5/8"BORE SHAFT, STEERING WHEEL MTG SHAFT, STEERING LOWER, PINION SPROCKET SHAFT, STEERING, MID - FLOATING BUSHING-FLG,.75 x.88, x.50 LG OILITE WELDMENT, TOWER WELDMENT, TENSIONER SPACER,.266 B,.313 OD,.313 T RETAINING RING, INT, ZP KEY-3/16 X 3/16 X 7/ KEY-3/16 X 3/16 X 5/ JOINT-UNIVERSAL 3/4" SCR-HH 1/4-20 X.62 ZP TAP SCR-HH 5/16-18 X.87 ZP GR SCR-HH 5/16-18 X 1.25 ZP GR 5 FULL THREA NUT-HEX 5/16-18 ZP SCR-SET 1/4-20 x 1.25 DOG POINT BLACK WASHER-FLAT 1/4 ZP WASHER-FLAT 5/16 X.688 ZP WASHER-FLAT 1/4 X 1.00 X.06 ZP WASHER-LOCK 5/16 SPLIT ZP WASHER-LOCK 1/4 SPLIT SS SCR-HH 1/4-20 X 1.00 ZP GR SCR-HH M X 20 ZP GRADE RET RING-E TYPE BUSHING-FLG.7505 X X.625 BRNZ FTG-GREASE 3/ NUT-NYLOC M8 X 1.25 ZP CLASS MCH 2 FLANGE MACHINED Page 13

14 Tank Group (Pg 1 of 3) Page 14

15 Tank Group BOM (Pg 1 of 3) BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION LID W/ SEAT, TANK, ER20-V SEAT-CUSHIONED, SEWN SEAT & BACK SKIRT-DRIP, LID, END PIECE SKIRT-DRIP, LID,CENTER 20" SPACER,.39 ID X.75 OD X.25 T, PVC NUT-TEE, PROPELL INSERT 1/4-20 X 5/16 ZP SCR-FHSCS 1/4-20 X 1.00 SS WASHER-FLAT #10 SS SWITCH, SEAT, BOLT MOUNT SCR-HI/LO 10 X.75 SS PAN HD GASKET, RUBBER BLADE, PRESS IN Page 15

16 Tank Group (Pg 2 of 3) Page 16

17 Tank Group BOM (Pg 2 of 3) BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION S 2 BACK UP PLATE 1/8" STEEL TANK, SOLUTION & RECOVERY ER20-V ASSY, VACUUM & HOUSING HINGE, STEEL, 11.38" LONG PAINTED PLATE - INSERT, INTERCONNECT PLATE - BASE, INTERCONNECT WELDMENT, VAC MOTOR PILLAR FTG-TEE 3/4 MPT X 1/2 HB NYLON SCR-THMS 8-32 X.62 SS SCR-HH 3/8-16 X.87 ZP GR WASHER-FLAT 3/8 X.812 X.0625 ZP WASHER-LOCK 3/8 SPLIT ZP SCR-THMS X.62 SS SCR-THMS 1/4-20 X.50 SS W/NYLON PATCH NUT-NYLOC 1/4-20 SS WASHER-FLAT #10 SS SCR-HH 1/4-20 X.75 ZP DECAL, MAIN OVAL MAX-RIDE 20, ER V WIRE ASSY, SEAT SWITCH WIRE ASSY, SEAT SW CONN RIVET-POP 1/8 DOME HD, BLK ALUM BODY WASHER-FLAT 1/4 ZP WASHER-CONICAL SPRING 1/ SCR-HI/LO 10 X.75 SS PAN HD FILTER UNIT, SCREENED FLOAT Page 17

18 Tank Group (Pg 3 of 3) Page 18

19 Tank Group BOM (Pg 3 of 3) BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION CLIP, FOR 1/2" ID HOSE FILTER, FILL PORT, ES MUFFLER-VAC MOTOR, SCV 24/ HOSE-DRAIN W/CAP 1.50"ID, 30.5"L BRACKET - MTG, REAR COVER LATCH & ELEC HOLDER - CORD, W/ SOFT CAPS, BATT CHARGR BRACKET, BREAKER MOUNT 20" CLIP-TOOL 1.5 INCH HOSE SCR-FHMS 8-32 X.50 BRASS SCR-HI/LO 10 X.50 BLACK ZINC PAN HD WASHER-FLAT #8 ZP MCH 2 FLANGE MACHINED SCR-THMS X.37 SS WASHER-INT TOOTH LOCK #10 SS DECAL, BRUSH MOTOR, MAX RIDE DECAL, VACUUM-DRIVE MOTOR-POWER SWITCH, TOGGLE W/FEM PACK CIRCUIT BREAKER-BOOT CIRCUIT BREAKER-4.0AMP PUSH BUTTON INDICATOR, BATTERY CHARGE STATUS (E1720) STRAIN RELIEF CABLE DIA # ASSY, ELECTRICAL PANEL, 20/ CLAMP-HOSE, SS, 2.50 MAX WORM CLAMP-HOSE 1.75 DIA NOMINAL COVER, ELEC BOX, ECO 20" COVER, ELEC BOX, SPORT 20" DECAL, 2 POSITION SWITCH, BRUSH MOTOR (SPORT ONLY) CIRCUIT BREAKER-30AMP PUSH BUTTON CIRCUIT BREAKER-50AMP PUSH BUTTON (SPORT ONLY) KEYSWITCH ASSY, 2 POS, ON/OFF (SPORT ONLY) Page 19

20 Steering Column Group Page 20

21 Steering Column Group BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION NUT-NYLOC HALF 1/2-20 ZP BOOT - STEERING SHAFT, SCV CONSOLE, STEERING ER2026-V PANEL-CONTROL, LH FWD-REV SLCTR ASSY PANEL-FRONT, STEERING CONSOLE, ER20/26-V STEERING WHEEL " PLATE, WATER FLOW LEVER ROD, WATER FLOW LEVER, FINISHED PANEL, CENTER, KEY SWITCH & C.B PANEL-CONTROL RH, FUNCTION SELECT, SPORT SPACER, PVC, KEY SWITCH,.188 THK KEY-WOODRUFF 3/16 X SCR-PHMS 6-32 X.37 ZP SCR-HI/LO 10 X.625 BLACK ZINC NUT-NYLOC 6-32 ZP WASHER-FLAT 1/4 ZP WASHER-FLAT 1/2 X 1.37 X.10 ZP WASHER-LOCK 1/4 SPLIT ZP RIVET-POP 3/ SCR-THMS X.37 SS SCR-HH 1/4-20 X.75 ZP DECAL-FWD-REV SELECTOR MAX RIDE DECAL-WATER FLOW DECAL, CENTER PANEL, KEY SWITCH-C.B GAUGE-BATTERY TRUCHARGE PGDT 36VDC KEYSWITCH ASSY, SWITCH+WIRES MR CIRCUIT BREAKER- 100A SWITCH, PUSH BUTTON (HORN SCV 36V) TOGGLE BOOT, FULL, OPEN THROAT, RED SWITCH-TOGGLE G SERIES NYL SPDT ON/ON SWITCH, PUSH BUTTON, BLUE LED SWITCH, PUSH BUTTON, ORANGE LED LEVER, SOLUTION CONTROL DECAL-FUNCTION SELECTOR MAX RIDE (ECO) DECAL, FUNCTION SELECTOR, (SPORT) LAMP ASSY, LED AMBER, 24V (SPORT ONLY) CLIP, TINNERMAN (SPORT ONLY) Page 21

22 Scrub Head Group Page 22

23 Scrub Head Group BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION LOCTITE ML BLUE HUB ASSEMBLY, DISC DECK BUSHING-FLG, 1.0 x 1.25 x 1.0"LG OILITE WELDMENT,SCRUBDECK, 20" SHAFT - STUB, RT-ANGLE DRIVE, DISC BRUSH COVER, SCRUB HEAD 20" RING, PIVOT RET RING-EXT.687 BLK OXIDE KEY-6mm X 6mm X KEY-6mm X 6mm X HOSE 3/8" ID X 16.5" CLAMP-CRIMP 170R SS SCR-THMS X.625 SS WASHER-LOCK 1/4 SPLIT, HIGH-COLLAR, SS WASHER-FLAT 1/4 ZP WASHER-FLAT, 2.50 OD X 1.28 ID X.095 ZP WASHER-FENDER 3/8 X 1.12 X.10 ZP HARD SCR-HH 1/4-20 X.75 ZP WASHER-FLAT 13/16 X 1.25 X.08 ZP SCR-SHCS M6-1.0 X 12 ZP BLT-HH FLG M8X1.25X20 PRECOTE, ZD FITTING, WATER NOZZLE W/ MOUNT HOLES GEAR - MOTOR, BRUSH, 24VDC 400W, AMER (ECO) GEAR-MOTOR, BRUSH, 24VDC 600W, AMER (SPORT) Page 23

24 Scrub Head Lift Group Page 24

25 Scrub Head Lift Group BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION NOTES WELDMENT,SCRUBDECK, 20" SHOWN IN SCRUB HEAD GROUP WELDMENT, DECK ADJ LINK 20" WELDMENT, SCRUBHEAD ARM LINK, CABLE CABLE- SCRUB DECK MR W/D, FRAME, ACT MNT PART OF ITEM IN FRAME GROUP W/D, FRAME, PULLEY MNT 2 PART OF ITEM IN FRAME GROUP W/D, FRAME, PULLEY MNT 5 PART OF ITEM IN FRAME GROUP SCR-HH 3/8-16 X.87 ZP GR WASHER-FLAT 3/8 X.812 X.0625 ZP WASHER-FLAT.390 X.880 X.062 NYL CLEVIS-YOKE, 1/2-20 WITH.375 PIN NUT-HEX 1/4-20 SS NUT-NYLOC 5/16-18 SS WASHER-LOCK 1/4 SPLIT SS ACTUATOR ASSYW/ PK-100MM STROKE 750N CE PIN-CLEVIS 5/16 X 1.00 ZINC PULLEY-PLASTIC 2" x.25" GROOVE STUD-BALL GAS SPR 5/16-18 THRD.391DIA PIN-CLEVIS 3/8 x ZP RING-RUE 3/ NUT-JAM 1/2-20 ZP NUT-JAM 3/8-16 ZP NYLOC PLT 2 BLT-SHOULDER 1/2 X 1/2 LG X 3/8-16 Page 25

26 Squeegee Group Page 26

27 Squeegee Group BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION KNOB-3 SIDED 5/16 NYLOC WELDMENT, SQUEEGEE 20" WELDMENT, OUTER BAND WELDMENT, INNER STRAP MOUNT, LATCH SCR-THUMB 1/4-20 x 1.25 SS SQUEEGEE BLADE, 20" OUTER, PRIMOTHANE SQUEEGEE BLADE, 20" INNER, PRIMOTHANE ROLLER- SQUEEGEE CASTER SPACER,.328 B.498 OD.500,SS NUT-WING 1/4-20 ZP NUT-JAM 3/8-16 ZP WASHER-FENDER 3/8 X 1.12 X.10 ZP HARD WASHER-FENDER M8 X 24 SS LATCH, UNDER CENTER RIVET-BLIND 5/ GRIP SS SCR-BHSCS M X 30 SS SCR-BHSCS 3/8-16 X 1.75 ZP NUT-NYLOC M8 X 1.25 SS Page 27

28 Squeegee Lift Group Page 28

29 Squeegee Lift Group BOM BILL OF MATERIAL ITEM PART NO. QTY DESCRIPTION WELDMENT, SLIDER WELDMENT, SQUEEGEE MOUNT 20" SPACER, NYLON,.344 B.500 OD.813 T WASHER, NYLON,.510 B 1.00 OD.062 T LINK, SQUEEGEE PIVOT 20" CABLE-SQUEEGEE MR20" CASTER NUT-JAM 3/8-16 ZP NUT-JAM 1/4-20 NYLOC SS WASHER-FENDER 3/8 X 1.12 X.10 ZP HARD WASHER-FENDER M8 X 24 SS SPACER,.406 B.498 OD.325 T SCR-HH M X 25 SS FULL THREAD PIN-CLEVIS 5/16 X 1.00 ZINC (NOT SHOWN) PULLEY-PLASTIC 2" x.25" GROOVE SPACER-.32 OD X.499 OD X.31 LG PIN-CLEVIS 3/8 x ZP RING-RUE 3/8 (NOT SHOWN) SCR-BHSCS 3/8-16 X 1.75 ZP NUT-NYLOC M10 X 1.5 ZD CLASS NUT-NYLOC M8 X 1.25 SS Page 29

30 Wiring Diagrams Page 30

31 Page 31

32 Page 32

33 Page 33

34 Page 34

35 Page 35

36 Page 36

37 Page 37

38 Warranty Page 38

39 Page 39

40 Excellence Meets Clean Minuteman is a Full Line Manufacturer of Sweepers and Scrubbers, for Industrial Facilities. 14N845 U.S. Route 20, Pingree Grove, IL USA Phone (800) A Member of the Hako Group # Rev A 11/16