C-316 SERIES. Bulletin C

Transcription

1 ulletin SERIES Versa Product ompany, Inc., 22 Valley Rd., Paramus, NJ US Phone: (201) Fax: (201) Versa V, Prins Willem lexanderlaan 1427, 7312 G peldoorn, The Netherlands Phone: Fax: sales@versa-valves.com

2 General escription...page 3 Specifications...Page 4 Repair kits...page 4 ross Reference hart...page 5 Recommended Hazardous Location Option Packages...Page 5 Operated Operated...Page 8 THE -316 Side Ported, Palm button...page 9...Page 10 Electrical...Page Operated Operated...Page 11, Palm button,...page Page Manually Operated Manual Palm utton...page Rotary...Page 14 Key...Page 15 Lock Out...Page 16 y Pass...Page 16 Mechanical M...Page 17 NMUR irect Mount THE -316 SERIES THE -316 NMUR Operated...Page 18...Page 18 MP MP Modular ir Package Operated...Page 19...Page 19 Manual Override...Page 17 Vent Options...Page 17 Stainless Steel Tag...Page 17 Options

3 GENERL ESRIPTION Series -316 The -316 Series is available as either a 4-way, for double acting devices or a 3-way, for spring return devices. The 3-way function can be specified as either normally closed or opened. ll solenoid actuators are solenoid/pilot type, which allows the use of the smallest solenoids available resulting in low power consumption. This design also assures a positive shifting force which makes certain the valve shifts when energized and reduces the chance of coil burnout. solenoid spring return models utilize an air assisted spring return feature assuring a positive return. ouble solenoid models are equipped with a detent that maintains the valve in the last shifted position, even in high vibration environments. complete selection of electrical connections, power requirements and area classifications are available. See page 6-7 THE -316 SERIES The -316 Series consists of and investment cast, 316 stainless steel valves, in three categories: Side Ported, NMUR style direct mount and MP, an integral stainless steel regulator and valve ody Ported Valves -316 Namur Valves The Versa -316 Series stainless steel NMUR mount actuator control valve is a high flow, bubble-tight, 5-port, valve. It is designed to mount directly to any NMUR actuator, thus reducing actuator response time and space. Installed costs are also lower as the need for tubing, fittings, brackets and assembly labor are greatly reduced. ll mounting screws and seals are included with valve. The 5-port design allows the -316 NMUR to be ordered as either a 4-way, for double acting actuators or a 3-way, for spring return actuators. When the 3-way function is utilized, the unused exhaust port becomes an actuator vent where a filter/ muffler can be installed to prevent contaminants from entering either the valve or the actuator. The 5-port design allows the user to independently control actuator speed in either the open or close direction. Speed or bleed controls are optional. See page 18. MP Modular ir Package MP system consists of a filter/regulator, gauge and directional control valve all in one. MP is based on Versa s field proven -316 and R Series. ll inter-component connections utilize O -ring interface sealing reducing potential leakage points. The combination of -316 & R reliability, O ring sealing and a simple design principal all provide a reliable and easily maintained product. MP is the sensible choice. The basic MP system is made of two configurable modules. Module one is the air preparation module consisting of filter/regulators, gauges and drains. Module two is the control valve module consisting of many different variations of 3-way control valves. See page 19. ONSTRUTION: alanced Spool The forces required to actuate the plunger are unaffected by pressures being controlled assuring positive shifting throughout the entire range. Wafer Sealing Wafer type elastomer sealing provides leakproof operation throughout entire pressure range. The wafer/wiper style seal also provides a low friction profile. Large iameter Large diameter pilot piston produces high shifting forces in Versa -316 pilot and actuated applications assuring a positive shifting force. The U cup offers friction free sealing for a positive shift. Epoxy Molded oil Epoxy molding offers moisture resistance and heat dissipation in the toughest applications. ir-ssisted ir boosts spring for positive valve return. Investment ast Stainless Steel 316 stainless steel components utilized for superior corrosion protection in the harshest environments. Investment cast components offer a first class finish while providing weight savings and superior flow. Fully Ported High Flow Internal flow area equal to or greater than the area of the corresponding pipe/tube size. High Performance ctuator ll the -316 Series solenoid valves utilize a high performance solenoid pilot design. This design utilizes available media pressure/ force to shift valve assuring positive shifting. This design also produces the lowest wattage requirements in the industry. 3

4 SELETOR HRT & PROUT NUMERING Each letter and digit in the product number of a Versa Valve has a significant meaning, as explained below. S G XX 120 Valve TUTING EVIES Function Port Spool etails Suffix etails Type of ody Material Series Left Side* Right Side* (see Spool etails) Size (flow pattern) Mechanical Electrical 4 Specifications Flow Rate: v = 2.0 NMUR v = 1.6 MP v = 1.5 Port Size: Inlet, cylinder and exhaust: ¼ NPT Media: -316 Pneumatic* MP Pneumatic : & solenoid valves Temperature: -5 to 200 F (-20 to 93 ), Media and ambient Low Temp (-44 option) Manual: -20 to 200 F (-29 to 93 ), Media and ambient : -55 to 200 F (-48 to 93 ), Media and ambient : -40 (-40 ) to Max based on solenoid type *For hydraulic service consult factory Operating Pressure THE -316 SERIES Valve Function Minimum psi (bar) Maximum psi (bar) 25 (1.8) 150* (10.3) ual etent 15 (1.0) 150* (10.3) (with and without strong spring -S) See ontrolled (inlet) Pressure chart below *Exhaust restriction recommended for operating pressures over 125 psi (8.6 bar) Operated Minimum Pressure Required Series -316 Valves am Operator G -pilot I P Pressure- S Z ontrolled (inlet) Pressure psi bar psi bar psi bar psi bar psi bar psi bar psi bar psi bar ombination ctuators 136PE, -150E, -173E, -314E, -356, -356N, -357E see suffix column Hand utton (for panel mounting) (spring pushes valve spool) etent (for 2-position manually operated valves) *NOTE S above is on left end of valve looking at inlet G above is on right end of valve looking at inlet 2* Two-Way 2/2 3 Three-Way 4 Four-Way *Two-Way may be created by plugging the exhaust port of three-way valve bodies 3 1/4 NPT ody with threaded side-ports (for Manual, and solenoid actuated valves) ody with threaded side-ports with internal drilling to supply inlet pressure to -pilot actuator Manifold mounted with internal drilling to supply inlet pressure to -pilot actuator. NMUR Valve Three-Way Valves 1 losed 2 Four-Way Valves 2 Materials: Valve body and internal parts: 316L stainless steel ctuator caps: 316L stainless steel Valve seals: FKM (fluorocarbon) Option Low Temp Nitrile ( -44 ) Screws: Stainless steel internal parts: 304, 430F and 302 stainless steel oil housing: epends on coil selected, see page 7 Repair kits Repair Kit Number Prefix Suffix No. No. NMUR G, G P, P 136PE N N * Z, Z 314E 357E Z Z * SI, IS Standard S, S 357E S S * S,S Standard I, I 150E ZI, IZ Standard ZI ZI * I, I 173E G, G N N * G, G P, P 356N N N * GG, PP GG GG GG-NE SP,PS Standard SG * SP SG,GS SG SG-NE P, P 314E P P * S, S 314E SI SI * IZ LOV ZI-LOV ZI-LOV * *For NMUR valve repair kits contact factory. 316 indicates that the basic construction material for valve parts is ISI 316 Stainless Steel (onforms to NE Standard MR-01-75) -3 MP identifier -NE_ NMUR valve with 316 mounting screws, -NE NE NE3 M5 -G ust Proof -44 Low Temperature seals -U Up Right coil housing -ME Override, momentary contact Page 17 Tagging -NV28, Stainless steel I tag; see Page 17 ombination ctuators -136PE Palm utton, Page 9 & E - etent Page E, etent Page 9-314E Key Operated ctuator Page utton ctuator W/ Latch Reset Page & N ctuator W/ Latch Reset No utton Page 10, 12, 18 & E Rotary Switch- etent Page 14 Electrical -HT High Temp coil -L 0.85 Watt coil -L 1.8 Watt coil -P NEM 4/4X -ST Stainless steel coil housing -U Upright solenoid end cap -X_ Stainless Steel housing,multi agency approvals -XX NEM 7 & 9 -XN TEX See page 5 for Suffix specifications Rating ode: = 60Hz frequency = irect urrent () E= 50Hz frequency Three numbers follow the Rating ode to indicate voltage: Examples: Voltage ode 24V60 = V60 = V = 024 See Page 7 for specific coil and codes.

5 THE -316 SERIES Hazardous Location ombination Suffix etails ross Reference hart Suffix Reference Suffix escription - 72 wire leads -14 vent, water proof nut -H2E 1/8 npt vent -HE ¼ npt vent -HT lass H coil -L14 vent dust nut -L 0.85 watt -L 1.8 watt -LV 0.85 watt (World ) -LX 1.8 watt (World ) -LZ 0.5 watt (World ) -P Potted coil; NEM 4 -PS Potted coil, male conduit; -ST Stainless housing -VJT dd on Junction ox -XS World ** -XT World ** -XN TEX -XT World ** -XV World ; North merica -XX North merican -303 Integral diode North merican (-XX) ombination Suffix Included Suffix -XX -XX, -HT -XX4 -XX, -14, -HT -XX -XX, -PS -XX4 -XX, -14, -PS -XX -XX, -HT, -PS -XX4 -XX, -14, -HT, -PS -XX -XX, -ST -XX4 -XX, -14, -ST -XXE -XX, -P, -ST -XXE4 -XX, -14, -P, -ST -XXF -XX, -HT, -ST -XXF4 -XX, -14, -HT, -ST -XXG -XX, -L, -ST -XXG4 -XX, -14, -L, -ST -XXH -XX, -HT, -P, -ST -XXH4 -XX, -14, -HT, -P, -ST -XXJ -XX, -L, -P, -ST -XXJ4 -XX, -14, -L, -P, -ST North merican (-XX) (ont.) ombination Suffix Included Suffix -XXK -XX, -HT, -L, -P, -ST -XXK4 -XX, -14, -HT, -L, -P, -ST -XXL -XX, -P -XXL4 -XX, -14, -P -XXM -XX, -HT, -P -XXM4 -XX, -14, -HT, -P -XXN -XX, -L, -P -XXN4 -XX, -14, -L, -P -XXQ -XX, -HT, -L -XXQ4 -XX, -14, -HT, -L -XXR -XX, -L -XXR4 -XX, -14, -L -XXS -XX, -L, -ST -XXS4 -XX, -14, -L, -ST -XXU -XX, -HT, -L, -ST -XXU4 -XX, -14, -HT, -L, -ST -XXV -XX, -L -XXV4 -XX, -14, -L -XXW -XX, -, -HT, -H2, -P, -ST -XXW4 -XX, -14, -, -HT, -P, -ST TEX (-XN) ombination Suffix Included Suffix -XN -XN, -HT -XN -XN, -ST -XNE -XN, -P, -ST -XNE4 -XN, 14, -P, -ST -XNF -XN, -HT, -ST -XNG -XN, -L, -ST -XNH -XN-HT, -P, -ST -XNJ -XN, -L, -P, -ST -XNJ4 -XN, -14, -L, -P, -ST -XNK -XN, -HT, -L, -P, -ST -XNL -XN, -P -XNL4 -XN, -14, -P -XNM -XN, -HT, -P -XNN -XN, -L, -P -XNN4 -XN, -14, -L, -P -XNP -XN, -HT, -L, -P -XNQ -XN, -HT, -L TEX (-XN) (cont.) ombination Suffix Included Suffix -XNR -XN, -L -XNS -XN, -L, -ST -XNU -XN, -HT, -L, -ST -XNV -XN, -L -XNX -XN, -L, -PS -XNWS -XN, -VJT, -L, -PS World (-X, -XV, -XT) ombination Suffix Included Suffix -XS1 -XS, -HT, -LX -XS2 -XS, -HT, -LX, -H2E -XS3 -XS, -HT, -LX, -HE -XS4 -XS, -HT, -LX, -L14 -XS5 -XS, -HT, -LX, XS6 -XS, -HT, -LX, -H2E, XS7 -XS, -HT, -LX, -HE, XS8 -XS, -HT, -LX, -L14, XS9 -XS, -HT, -LX, -14 -XS10 -XS, -HT, -LX, -14, XT1 -XT, -HT, -LX -XT2 -XT, -HT, -LX, -H2E -XT3 -XT, -HT, -LX, -HE -XT4 -XT, -HT, -LX, -L14 -XT5 -XT, -HT, -LX, XT6 -XT, -HT, -LX, -H2E, XT7 -XT, -HT, -LX, -HE, XT8 -XT, -HT, -LX, -L14, XT9 -XT, -HT, -LX, -14 -XT10 -XT, -HT, -LX, -14, XV1 -XV, -HT, -LX -XV2 -XV, -HT, -LX, -H2E -XV3 -XV, -HT, -LX, -HE -XV4 -XV, -HT, -LX, -L14 -XV9 -XV, -HT, -LX, -14 -XT1 -XT, -HT, -LX -XT2 -XT, -HT, -LX, -H2E -XT3 -XT, -HT, -LX, -HE -XT4 -XT, -HT, -LX, -L14 -XT9 -XT -HT, -LX, -14 Recommended Hazardous Location Option Packages North merican - S ertification/power TEX - IEEx - INMETRO Enclosure/Wire Standard Power Low Watt* Standard Power Low Watt* Steel, Electroless Nickel Plated, 24 Inch Leads -XXL4 -XXN4 -XNL4 -XNN4 Stainless Steel, High Performance 430 type, 24 wire leads -XXE4 -XV9 -XNE4 -XT9** Stainless Steel, 316L type, Junction ox with Terminal Strip -XT9** -XS9** *1.8 watt solenoid. lso available 0.5 and 0.85 watt. onsult factory for availability. **ll the XS, -XT & -XT solenoids are World s certified for North merica, TEX, IEEx and INMETRO and more. -XV solenoids certified for North merica. For complete solenoid specifications please see above and page

6 Electrical NON HZROUS LOTIONS OPERTORS Suffix Identification Protection lassification rea lassification and (Gas Grouping) ertification- (onformance) Ingress Protection None or -HT, P General Purpose Indoor & Outdoor S NEM 1,2, 3 & 4 -H -H (Shown) General Purpose Indoor & Outdoor S NEM 4; IP65 HZROUS LOTION SOLENOIS gency pprovals North merica World* Suffix* -XX Protection lassification Hazardous Locations Zones ivisions L I, IV 1, Grp ( & ) L II, IV 1, Grp (E, F & G) Temp T3 L I, IV 2 Grp ( ) L II, IV 2 Grp (E, F & G) Temp T3 rea lassification and (Gas Grouping) gency UL S Ingress Protection NEM 7 & 9 -XN (d) Flameproof Ex d II+H2 T3 T6 Gb II 2 G Ex d II+H2 T3 T6 Gb IEEx TEX IP66/67 -XV -XT Hazardous Locations (d) Flameproof L I, IV 1, Grp (,, ) L II, IV 1, Grp (E, F, G) L III L I, IV 2, Grp (.,, ) L II, IV 1, Grp (E, F, G) L III S US NEM 4, 4X, 6P, IP66 -XT (d) Flameproof (e) Increased Safety L, I, Zn 1 /Ex de II T* L, II Zn, 21 Ex t 21, IP 21 Ex II 2 G /Ex d e II T3 T6 Gb Ex tb III T3 T6 b TEX - IEEx INMETRO IP66/67/68 -XS 6 -XM -XMF -XMF -XMFF -XIF -XIFF (mb) Encapsulation (e) Increased Safety (t) Tight ust (ia) Intrinsic Safe -XISX6 Intrinsic Safe L I, IV 1, Grp (,, & ) -XIS L II, IV 1, Grp (E, F, & G) L III *Recommended solenoid options. See page 5 Ex e mb II T5, T6 Gb Ex tb III T85º, T100º b II 2 G Ex e mb II T5...T6 Gb II 2 Ex tb III T85º...T100º b Ex (ia) II T4...T6 Gb Ex (ia) III T130º...T80º b II 2 G Ex ia II T4...T6 II 2 Ex ia 21 T130º, T80º II 2 G Ex ia II T4 T6 Gb II 2 G Ex ia II T4 T6 Gb IEEx TR U TEX IEEx TR U TEX TEX IEEx TR U Factory Mutual S IP67 IP67 IP65

7 OIL OES: Identify the solenoid frequency and voltage consisting of a Rating ode and Voltage as shown at right. oil codes complete the part number for a solenoid operated valve. Rating ode = 60Hz frequency = irect urrent () E = 50Hz frequency Voltage Indicated by three digits: e.g. 24 volts = volts = =,120Volts/60hz Voltage (Power) ll usual 50 Hz & 60 Hz (7.3W) ll usual (9.5W) 24V60, 120V60, 240V60 (8.5W) 24V50, 110V50, 220V50 (8.5W) 12V, 24V, 48V (10.5W) Electrical haracteristics lass F epoxy molded coil (155º). ontinuous duty, 2 leads 24 (60 cm). lass F epoxy molded coil (155º), with 3 spade terminals and mini IN socket with PG9 cable gland. ontinuous duty. Miscellaneous Steel cover with 1/2 NPT conduit entry. Mini IN socket with PG9 cable gland (-H) or 1/2 conduit connection (-H). Voltage (Power) Electrical haracteristics Miscellaneous 50 Hz & 60 Hz (6W), (7.2W) & (1.8W) : 12V60 (012), 24V60 (024), 48V60 (048), 120V60 (120), 240V60 (120) : 6V (006), 12V (012), 24V (024), 48V (048) : 120V60HZ (120), 240V60HZ (240) 110V50HZ (E110), 220V50HZ (E230) : 12V (012), 24V (024) 48V (048), 120V (120) 1.8 watt standard. For 0.85 watt consult factory. 24V (4W) (onsult factory for other voltage options) 24V 10W inrush, 2.6W holding) (onsult factory for other voltages) 24V (0.8W) (onsult factory for other voltages) lass F epoxy molded coil (155º). continuous duty. 3 leads 24 (60 cm). Epoxy molded coils rated for continuous duty, lass H 180. ontinuous duty coil & rectifier, including surge suppression, potted within housing. ontinuous duty coil & power controller potted within housing. ontinuous duty coil and power controller potted within housing. Plated steel coil housing with 1/2 NPT conduit entry. For additional (-XX) solenoid options see page 5 Plated steel coil housing with M20 x 1.5 conduit entry. Ground terminal on cover. For additional (-XN) solenoid options see page 5 Suffix etail Option Packabe Stainless steel coil housing XV XT 1.8 watt Standard (vent to atmosphere) -XV1 -XT1 1/8 dapter (-H2E) -XV2 -XT2 1/4 dapter (-HE) -XV3 -XT3 ust Nut (-L14) -XV4 -XT4 Water proof nut (-14) -XV9* -XT9* Stainless steel coil housing with internal Junction ox. Internal and external ground screw. Suffix etail Ordering ode M 20 onnection ½ onnection No iode iode No iode iode Standard (vent to atmosphere) XS1 XS5 XT1 XT5 1/8 dapter (-H2E) XS2 XS6 XT2 XT6 1/4 dapter (-HE) XS3 XS7 XT3 XT7 ust Nut (-L14) XS4 XS8 XT4 XT8 ust Excluder (-14) XS9* XS10 XT9* XT10 Thick wall epoxy coil housing with integral junction box. Internal ground terminal. M20 x 1.5 conduit entry: (-XM), (-XMF), 1/2 NPT conduit entry with adapter: (-XMF), (-XMFF) Requires the use of an approved safety barrier or isolator. Thick wall epoxy coil housing and integral junction box. Internal ground terminal. M20 x 1.5 conduit entry: (-XIF) 1/2 NPT conduit entry with adapter: (-XIFF) 24V (1.6 watt max.) System voltage prior to barrier lass F epoxy molded coil (155º). ontinuous duty. Requires the use of an approved barrier or isolator. Maximum operating system voltage before barrier 28V. Maximum pilot pressure 115 psi (8 bar). 3 spade terminals, ISO IN 43650, Form PG9 cable gland (-H) 1/2 NPT conduit entry: (-H) *Recommended solenoid options. See page 5 7

8 THE -316 SERIES Mounting Hole imensions Side Ported Valves E Mounting Hole imensions E Inches mm E Optional Upright oil Housing Manual Override ⅛ NPT Port ⅛ NPT Port Manual Override /* E/E* shown is hazardous location type -XX. For more options see page 6-7. vailable as an option on side ported valves. Recommended for use with -X_, -XM_, -XMF_ & XIF_ coils on NMUR valves for mounting clearance. * E E* Side Ported Inches mm NMUR Inches mm ody Ported Valves SOLENOI OPERTE Side Ported Function ctuation Type Part Number Weight Flow Symbol losed - SG (*) SG (*) GS (*) GS (*) 1.6 lbs 1.6 lbs 2 2 ouble etent GG (*) GG (*) 2.5 lbs 1.1 kg 2 SG (*) SG (*) 1.7 lbs 0.8 kg E IN E ouble etent GG (*) GG (*) 2.6 lbs 1.2 kg * dd solenoid/coil voltages (page 7) & Suffix from Selector hart (page 4) E IN E Optional Manual Override Optional Manual Override ⅛ NPT Port ⅛ NPT Port /* E/E* shown is hazardous location type -XX. For more options see page 6-7. * E E* Inches mm

9 THE -316 SERIES ody Ported Valves SOLENOI, PLM UTTON with SPRING RETURN Side Ported Function ctuation Type Part Number Weight Flow Symbol losed Optional Manual Override ⅛ NPT Port Palm utton Palm utton Palm utton * dd solenoid/coil voltages (page 7) & Suffix from Selector hart (page 4) * /* shown is hazardous location type -XX. For more options see page 6-7. Manual override see page 17 G PE-(*) G PE-(*) G PE-(*) G PE-(*) G PE-(*) G PE-(*) 2.0 lbs 2.0 lbs 2.1 lbs 1.0 kg * 2 2 Travel * Inches mm E IN E SINGLE SOLENOI, PLM UTTON with ETENT Side Ported Function ctuation Type Part Number Weight Flow Symbol losed - etent with utton etent with utton I E-(*) I E-(*) I E-(*) I E-(*) 2.1 lbs 1.0 kg 2.1 lbs 1.0 kg 2 2 etent with utton I E-(*) I E-(*) 2.2 lbs 1.0 kg E IN E * dd solenoid/coil voltages (page 7) & Suffix from Selector hart (page 4) Optional Manual Override ⅛ NPT Port * /* shown is hazardous location type -XX. For more options see page 6-7. Manual override see page 17 * Travel * Inches mm

10 THE -316 SERIES ody Ported Valves LTHING, SINGLE SOLENOI, SPRING RETURN without PLM UTTON Side Ported Function ctuation Type Part Number Weight Flow Symbol losed -, Reset G N-(*) G N-(*) G N-(*) G N-(*) 1.9 lbs 1.9 lbs 2 2 Reset G N-(*) G N-(*) 2.0 lbs E IN E * dd solenoid/coil voltages (page 7) & Suffix etails from Selector hart (page 4 ) Optional Manual Override ⅛ NPT Port * /* shown is hazardous location type -XX. For more options see page 6-7. Manual override see page 17 * * Inches mm LTHING, SINGLE SOLENOI, SPRING RETURN with PLM UTTON Side Ported Function ctuation Type Part Number Weight Flow Symbol losed, Reset with utton G (*) G (*) 2.0 lbs 2 -, Reset with utton G (*) G (*) 2.0 lbs 2, Reset with utton G (*) G (*) 2.1 lbs 1.0 kg E IN E * dd solenoid/coil voltages (page 7) & Suffix from Selector hart (page 4 ) Optional Manual Override ⅛ NPT Port * Travel * Inches * /* shown is hazardous location type -XX. For more options see page 6-7. Manual override see page 17 mm

11 THE -316 SERIES ody Ported Valves PILOT OPERTE Side Ported Function ctuation Type Part Number Weight Flow Symbol losed - ouble etent SP PS PP lbs 0.5 kg 1.0 lbs 0.5 kg 1.3 lbs SP lbs 0.5 kg E IN E ouble etent PP lbs E IN E ⅛ NPT Port * E E* /* E/E* Inches mm PILOT, PLM UTTON with SPRING RETURN Side Ported Function ctuation Type Part Number Weight Flow Symbol losed Palm utton P PE 1.3 lbs 2 - Palm utton P PE 1.3 lbs 2 Palm utton P PE 1.4 lbs E IN E * ⅛ NPT Port * Travel * Inches /* mm

12 THE -316 SERIES ody Ported Valves PILOT, PLM UTTON with ETENT Side Ported Function ctuation Type Part Number Weight Flow Symbol losed - etent with utton etent with utton I E I E 1.5 lbs 1.5 lbs 2 2 etent with utton I E 1.6 lbs E IN E ⅛ NPT Port * * Travel * Inches /* mm LTHING, PILOT, SPRING RETURN without PLM UTTON Side Ported Function ctuation Type Part Number Weight Flow Symbol losed,, P N 1.3 lbs 2 -, P N 1.3 lbs 2, P N 1.4 lbs E IN E ⅛ NPT Port * Inches /* mm

13 THE -316 SERIES ody Ported Valves LTHING, PILOT, SPRING RETURN with PLM UTTON Side Ported Function ctuation Type Part Number Weight Flow Symbol losed, Reset with Palm utton P lbs 2 -, Reset with Palm utton P lbs 2, Reset with Palm utton P lbs E IN E ⅛ NPT Port * * Travel E * E Inches /* mm MNUL, PLM UTTON, SPRING RETURN Side Ported Function ctuation Type Part Number Weight Flow Symbol losed Palm utton N SI lbs 0.5 kg 2 - Palm utton N IS lbs 0.5 kg 2 Palm utton N SI lbs E IN E * * Travel * Inches /* mm

14 THE -316 SERIES ody Ported Valves MNUL, PLM UTTON, ETENTE Side Ported Function ctuation Type Part Number Weight Flow Symbol losed Palm utton etent N ZI lbs 2 - Palm utton etent N IZ lbs 2 Palm utton etent N ZI lbs E IN E ⅛ NPT Port * * Travel * Inches /* mm MNUL, ROTRY, SPRING RETURN & ETENTE Side Ported Function ctuation Type Part Number Weight Flow Symbol losed etent N S E Z E(*) 1.6 lbs 1.8 lbs 0.8 kg 2 2 etent N S E Z E(*) 1.6 lbs 1.8 lbs 0.8 kg 2 2 etent N S E Z E(*) 1.8 lbs 0.8 kg 2.0 lbs 0.9 E IN E E IN E * Inches mm /* 14

15 THE -316 SERIES ody Ported Valves MNUL, KEY, SPRING RETURN & ETENT Side Ported Function ctuation Type Part Number Weight Flow Symbol losed - etent etent N N S E(*) Z E(*) S E(*) Z E(*) 1.8 lbs 0.8 kg 1.9 lbs 1.8 lbs 0.8 kg 1.9 lbs etent N S E(*) Z E(*) 2 lbs E IN E E IN E *Key Number - Key number assigned by Versa * Inches /* mm MNUL, KEY, PILOT RETURN Side Ported Function ctuation Type Part Number Weight Flow Symbol losed Key P E(*) 2 lbs 2 Key P E(*) 2 lbs 2 Key P E(*) 2 lbs E IN E *Key Number - Key number assigned by Versa ⅛ NPT Port * Inches /* mm

16 THE -316 SERIES ody Ported Valves MNUL, LOK - OUT Side Ported Function ctuation Type Part Number Weight Flow Symbol losed Palm utton etent N IZ LOVE 1.3 lbs Palm utton etent N IZ LOVEE 1.4 lbs 0.6 E IN E Note: locks not included * () * () (Travel) * Inches mm MNUL, y Pass Valve Side Ported Function ctuation Type Part Number Weight Flow Symbol 1/4 NPT* 4Way 3-Position Key Operated N U-430X E***-2039 (*** = key code assigned at factory) dd -9E Sffix etail for Extended Plunger 2 lbs YPSS TEST NORML Positions Optional Extended Plunger Suffix -9E * E Inches mm The, basic valve is a 3 position manual valve. Operation is as follows: Position 1. This position is the normal position or the regular operation mode. Position 2. This position places the control circuit in the test mode. In this position the bypass valve allows pressure to the circuit for testing while maintaining pressure on the actuator. With pressure to solenoid inlet and solenoid circuit outlet blocked/isolated this position allows complete testing of solenoid circuit while not shutting down the system. Position 3. This position places the control system in a replace mode. Should it be determined that a component in the control circuit needs to be repaired and or replaced this position allows total isolation from pressure while still holding system pressure to actuator. *1/2 NPT available; part number: VU-450X E See V-316 Series. 16

17 THE -316 SERIES ody Ported Valves MNUL, M Side Ported Function ctuation Type Part Number Weight Flow Symbol losed am am N N S S lbs 0.5 kg 1.0 lbs 0.5 kg 2 2 am N S lbs 0.5 kg E IN E /* Standard am /* Over Travel am Suffix -18E Override E Options * () () (Travel) E Over Travel Inches mm Stainless Steel Tag ( ) ORERING INFORMTION -ME Override On Standard ap -ME -U Override On Up Right ap Vent Options Order any -316, -316, T, V or V-316 valve. s a separate line item (listed directly under valve part number to be tagged) list the tag part number P NV28. In remarks field specify the tag marking instructions. If sequential numbering is required provide the start and end numbers required in the sequence for the appropriate number of valves. Engraving Options Versa's engraved tags are available in two configurations. onfiguration one: is a simple text field consisting of two lines of text, 20 characters maximum per line. The text can be specified as alpha, numeric or both OIL P/N SV Hydraulic dapter -H2 -H ⅛ ¼ Excluders -L14-14 ust Proof Water Tight onfiguration two: is a text field with sequential numbering added. This option includes two lines of text. Line one is text. Line two allows for sequentially numbering the tag, 20 characters maximum per line. OIL P/N SV 966 Field for Sequential haracters 17

18 Note: & NMUR valves look the same externally. THE -316 SERIES NMUR NMUR, SOLENOI OPERTE NMUR Function ctuation Type Part Number Weight Flow Symbol losed - GS NE -(*) SG NE -(*) 1.7 lbs 0.8 kg 1.7 lbs 0.8 kg 2 2 ouble etent GG NE -(*) 2.3 lbs 1.0 kg 2 GS NE -(*) 1.7 lbs 0.8 kg E IN E ouble etent GG NE -(*) 2.3 lbs 1.0 kg E IN E dd mounting screw type from Selector hart Suffix column (page 4) * dd solenoid/coil voltages (page 7) & Suffix from Selector hart (page 4). Optional Manual Override Optional Manual Override ⅛ NPT Port ⅛ NPT Port E shown is hazardous location type -XX. For more options see page 6-7. Manual override see page 17 Inches mm NMUR LTHING, SOLENOI, SPRING RETURN without PLM UTTON NMUR Function ctuation** Type Part Number Weight Flow Symbol losed -, Reset without utton, Reset without utton, Reset without utton dd mounting screw type from Selector hart Suffix column (page 4 ). * dd solenoid/coil voltages (page 7) & Suffix from Selector hart (page 8). Optional Manual Override ⅛ NPT Port * **onsult Inches factory for other configurations mm * shown is hazardous location type -XX. For more options see page 6-7. Manual override see page 17 G N-NE -(*) G N-NE -(*) G N-NE -(*) 1.5 lbs 1.5 lbs 1.5 lbs 2 2 E IN E

19 THE -316 SERIES MP Modular ir Package ill of Materials escription Part Number Regulator RF GG Valve G N-3-XX-120 M6 x.43 MM full threads 3 mounting holes INLET Inches mm E Mounting Holes 0.28 (7.2mm) On center Vertical L to R 0.0 to 3.84 to 1.16 On center horizontal 1.25 ill of Materials escription Part Number Regulator RF GG Valve SG XS1-120 Spacer Y racket Relief Valve RV Inches mm INLET E 3 2 ir Prep Selection Part Number Weights Regulator, escription psi psi lbs kg Filter and No gauge RF RF manual 2" gauge liquid filled RF GG RF GG drain* 2 1/2" gauge liquid filled RF GG RF GG Valve Selection Part Number Weights escription 3-way, normally closed 3-way, normally open lbs Kg, SG ** GS ** ouble, detented GG ** GG ** , spring return w/ latch G N-** G N-** , spring return w/ latch and button G ** G ** , spring return SP PS ccessories Weights escription Part Number lbs kg Mounting bracket dd to bill of Material uxiliary port plate dd Y to bill of Material Relief Valve (also specify ux port plate) dd RV *** to bill of Material Speed ontrol, close only dd suffix -3 to ontrol Valve p/n Speed ontrol, both open closed dd FV to bill of Material Notes: * For regulator auto drain, consult factory ** dd voltage and options. See page 7 For expilot change 3321 to 3301 Weight are for -XX type s *** dd set pressure, for example RV for 80 psi 19

20 Versa has been supplying the oil and gas industry with pneumatic and hydraulic components for over 50 years. We have built a reputation for quality that is unsurpassed in the market for high performance solenoids, pneumatic relays, resets and pilot valves WRNINGS REGRING THE ESIGN PPLITION, INSTLLTION N SERVIE OF VERS PROUTS The warnings below must be read and reviewed before designing a system utilizing, installing, servicing, or removing a Versa product. Improper use, installation or servicing of a Versa product could create a hazard to personnel and property. ESIGN PPLITION WRNINGS Versa products are intended for use where compressed air or industrial hydraulic fluids are present. For use with media other than specified or for non-industrial applications or other applications not within published specifications, consult Versa. Versa products are not inherently dangerous. They are only a component of a larger system. The system in which a Versa product is used must include adequate safeguards to prevent injury or damage in the event of system or product failure, whether this failure be of switches, regulators, cylinders, valves or any other system component. System designers must provide adequate warnings for each system in which a Versa product is utilized. These warnings, including those set forth herein, should be provided by the designer to those who will come in contact with the system. Where questions exist regarding the applicability of a Versa product to a given use, inquiries should be addressed directly to the manufacturer. onfirmation should be obtained directly from the manufacturer regarding any questioned application prior to proceeding. INSTLLTION, OPERTION N SERVIE WRNINGS o not install or service any Versa product on a system or machine without first depressurizing the system and turning off any air, fluid, or electricity to the system or machine. ll applicable electrical, mechanical, and safety codes, as well as applicable governmental regulations and laws must be complied with when installing or servicing a Versa product. Versa products should only be installed or serviced by qualified, knowledgeable personnel who understand how these specific products are to be installed and operated. The individual must be familiar with the particular specifications, including specifications for temperature, pressure, lubrication, environment and filtration for the Versa product which is being installed or serviced. Specifications may be obtained upon request directly from Versa. If damages should occur to a Versa product, do not Operate the system containing the Versa product. onsult Versa for technical information. LIMITE WRRNTY ISLIMER N LIMITTION OF REMEIES Versa s Series products are warranted to be free from defective material and workmanship for a period of ten years from the date of manufacture, provided said products are used in accordance with Versa specifications. Versa s liability pursuant to that warranty is limited to the replacement of the Versa product proved to be defective provided the allegedly defective product is returned to Versa or its authorized distributor. Versa provides no other warranties, expressed or implied, except as stated above. There are no implied warranties of merchantability or fitness for a particular purpose. Versa s liability for breach of warranty as herein stated is the only and exclusive remedy and in no event shall Versa be responsible or liable for incidental or consequential damages. Versa Products ompany, Inc. 22 Valley Road Paramus, New Jersey US Phone: Fax: Versa V Prins Willem lexanderlaan G peldoorn The Netherlands Phone: Fax: sales@versa-valves.com