SOLENOID VALVES FOR PROCESS CONTROL INDUSTRIES AIR VALVES FOR INDUSTRY SINCE 1949

Transcription

1 SOLENOID VLVES FOR PROCESS CONTROL INDUSTRIES ULLETIN PCg-200 IR VLVES FOR INDUSTRY SINCE 949 ISO 900 CERTIFIED Versa Products Company, Inc., 22 Spring Valley Road, Paramus, New Jersey 0760 TEL: 20/ Fax: 20/ Versa V., Prins Willem lexanderlaan 429, 7 G peldoorn, The Netherlands TEL: FX:

2 THE COMMITMENT CONTINUES Fluid Power is our business. It is our only business, so we have to be good at it. Since its beginning in 949, Versa has maintained its commitment to quality products and satisfi ed customers. Versa has succeeded in serving industry s needs with a broad line of directional control devices. Our focus on product variety, technical expertise and company support remains constant. It all begins with a responsiveness to industry needs and ends with delivery of the valve or system you need when you need it. We view ourselves as problem solvers and that role requires more than making good products. It is what we do before and after that is equally important From drawing board to user satisfaction, our commitment is continuous. QULITY IS SOLUTE Quality has no degrees at Versa. There is no such thing as pretty good or almost right. Every product is designed and manufactured to conform to uniformly high standards. These standards are assured by a quality management system which includes ISO 900 certifi cation and testing of all products prior to shipment. No matter how tough the application or environmental demands, Versa offers you a choice of valves to meet the challenge. dvanced design, durable construction materials and rigid manufacturing standards provide valves you can rely on for years of trouble-free performance. e it a single valve or a pneumatic system, Versa s commitment to quality is uncompromising. Count on it. WORLDWIDE CCESSIILITY More than 500 fl uid power representatives and over 00 stocking locations comprise Versa s worldwide distribution system. They are supported by manufacturing and technical centers in the United States and The Netherlands. The distributor network is the key to customer service and the source of continuous application feedback. Versa uses this input as part of its research and development program in an effort to respond to individual and industry needs. Versa makes certain that our distributors sales and service personnel receive factory training on an ongoing basis. This includes basic theory, product indoctrination and seminars. Our distributor family is a source of pride to Versa but more important it is a source of support and service to all of our customers. Contact Versa for the distributor servicing your specifi c area. HOW WE PUT IT TOGETHER IS WHT SETS US PRT Versa is not the biggest manufacturer of directional control valves, so we try to be the best. Design, manufacture, quality control, pricing, delivery-whatever the function- it must be geared to customer needs. Many companies sell valves. t Versa, that is not enough. We sell satisfaction. 2

3 Versa exercises diligence to assure that information contained in this catalog is correct, but does not accept responsibility for any errors or omissions. Versa also reserves the right to change or delete data or products at any time without prior notifi cation. To be sure the data you require is correct, consult factory. CONTENTS GUIDE Direct Mount ctuator Valves Page 4-9 Namur (Series C5) 4-way Namur (Series E5) 3-way... Page 4, 6 & 7... Page 5,- 7 Namur (Series C36) 3-way & 4 way... Page 8-7 odyported Valves....Page 0-20 luminum (Series C5 & C7) 3-way & 4 way... Page 0 - rass (Series V) 3-way & 4 way... Page 2-4 Stainless Steel (Series E & E5) 3-way... Page 5 Stainless Steel (Series C36) 3-way & 4 way... Page 6-7 Stainless Steel (Series V36) 3-way & 4 way... Page 8-20 Lockout Valves: rass (Series V) or Stainless Steel (Series V36) 3-way and 4-way... Page 2 Latching/Manual Reset Valves: rass (Series V) or Stainless Steel (Series V36) 3-Way & 4-Way... Page Redundant Valves: rass (Series V) or Stainless Steel (Series V36) 3-way & 4-way... Page 24 ccessories leed Control Valves... Dust Excluders.... Page Quick Exhaust Valves... Stainless Steel Regulators Technical Information: Non-Hazardous Service Solenoids...Page Hazardous Service Solenoids... Page Option vailability... Page 30-3 Warranty...Page 3

4 DIRECT MOUNT CTUTOR VLVES LUMINUM CONSTRUCTION SERIES C5 NMUR 3-Way/4-Way Field Convertible Solenoid Valves General Description The Versa C5 NMUR mount control valve is a high fl ow, 5-port, solenoid/pilot valve. It is designed to mount directly to any NMUR actuator, thus reducing actuator response time and cost of tubing, fi ttings, brackets, and labor. The 5-port design allows the C5 NMUR to be ordered as either 4-way (for double acting actuators) or 3-way (for spring return or fail-safe actuators). The function of this valve is fi eld convertible utilizing no special tools, gaskets, or sealants. Relocation of a port plug converts a 3-way to a 4- way, or a 4-way to a 3-way. When the 4-way valve is converted to 3-way function, the unused exhaust port becomes an actuator vent into which a fi lter/muffl er can be installed to prevent contaminants from entering either the valve or the actuator. Single solenoid models (for 2-position control), or double solenoid models (for 2 or 3-position control) are available. ctuator positioning is possible with the use of 3-position valves since all Versa C5 NMUR valves are bubbletight. complete selection of electrical connections, area classifi cations, and Operating Pressures and Weights Valve Type Single Solenoid/spring return (2-position) Double Solenoid/detented (2-position) Double Solenoid/spring centered (3-position) Porting Size Inlet and exhaust /4 NPT or G/4 Cylinder ports O ring seal per NMUR standard Operating Pressure Range Pneumatic 5-5 psi (-8 bar) 0-5 psi (0.7-8 bar) 5-5 psi (-8 bar) Installation, Filtration and Lubrication Valves have no limitations on mounting orientation. 40 to 50 micron fi ltration and general purpose lubricating oil ISO, STM viscosity grade recommended. mbient temperature range 5 F (5 C) to 25 F (50 C). power requirements makes the most exacting and demanding specifi cations or applications easy to satisfy. Manual overrides (guarded-push to operate) are standard on all C5 NMUR valves. Consult factory for other manual overrides available as an option. Materials Valve body and plunger: anodized aluminum (for stainless steel direct mount valve, See page 8) ctuating Caps: solenoid anodized aluminum spring cap synthetic resin Valve seals: plunger and body FKM (fl uorocarbon) pilot piston NR (nitrile) valve/actuator mounting O rings NR (nitrile) Pilot Piston: synthetic resin Screws: stainless steel (except valve to actuator = carbon steel) Port plug: brass Solenoid parts: sleeve, plunger & spring 304 & 430F stainless steel coils epoxy encapsulated with 3 spade terminals (std) or 2 or 3 wire lead (opt) coil cover (when applicable) option: C50 = carbon steel, painted; L XN, L XX, PC, PC XN, PC XX, XN, XX= carbon steel, zinc chromate plated pproximate Weights Ordinary Service 0.8 lbs. (363 g).2 lbs. (545 g).2 lbs. (545 g) Hazardous Service. lbs. (500 g).8 lbs. (86 g).8 lbs. (86 g) Pressure ranges may change based on solenoid option. See page 6. bar MPa = 0 For higher pressure applications, consult factory. Flow Rates Cv = 0.75 (Kv = ) average for all ports (48 SCFM at 00 psi; 82 Nm 3 / h at 7 bar). For actuator speed rates see page 6. Options Suffix Manual Override: none Standard on basic valves, guarded-push to operate. For other solenoid options see page 6. C5 NMUR Valve Product Number Selector FUNCTION** PORT SIZE Cv (Kv) SINGLE SOLENOID/SPRING RETURN, 2 POSITION DOULE SOLENOID/ DETENT, 2 POSITION 4-way /4 NPT.75 () CGS-42-N - - (coil code) CGG-42-N - - (coil code) 5/2 & 5/3 G/4.75 () CGS-4292-N - - (coil code) CGG-4292-N - - (coil code) asic Valve Number* DOULE SOLENOID/SPRING CENTERED, 3 POSITION locked Center Exhaust Ports Open CXX-4233-N - - (coil code) CXX-4234-N- - (coil code) CXX-4293-N - - (coil code) CXX-4294-N - - (coil code) 3-way** 3/2 & 3/3 /4 NPT G/4.75 ().75 () CGS--N - - (coil code) CGS-92-N - - (coil code) CGG--N - - (coil code) CGG-92-N - - (coil code) CXX-33-N - - (coil code) CXX-93-N - - (coil code) CXX-34-N - - (coil code) CXX-94-N - - (coil code) * ll valves include O ring interface seals and #0-24 mounting screws. For #0- screws change N to N2. For M5 screws change N to N3. ** 3-way is the same valve as 4-way, but is provided with a relocated cylinder port plug. See note on page 7 For coil code see page 6. dd suffix option here, if required. 4

5 SERIES E5 NMUR 3-Way Solenoid Valves General Description The Versa E5 NMUR mount control valve is an inexpensive, simple and effective 3-way direct-acting solenoid valve. It is designed to mount directly to any NMUR actuator thus reducing cost of tubing, fi ttings, brackets and labor. It is most effective on spring return or fail-safe actuators where high speed open or close is not important, but where cost is a factor. threaded actuator vent port is standard. vailable as a 3-way, 2-position, direct solenoid, spring return only, and with most of the Versa solenoid options. See page 6. Materials Valve body: anodized aluminum Valve seals: body/plunger NR (nitrile) valve/actuator mounting O rings NR (nitrile) Screws: (valve to actuator) = stainless steel) Solenoid parts: sleeve, plunger & spring 304 & 430F stainless steel coils epoxy encapsulated with 3 spade terminals (std) or 2 or 3 wire lead (opt) coil cover (when applicable) option: C50 = carbon steel, painted; L XN, L XX, PC, PC XN, PC XX, XN, XX= carbon steel, zinc chromate plated Operating Pressures and Weights Valve Type Single Solenoid/spring return (2-position) Operating Pressure Range Pneumatic 0-50 psi (0-0.3 bar) pproximate Weights Ordinary Service 0.6 lbs (272 g) Hazardous Service 0.9 lbs (408 g) Porting Size Inlet and Vent -/4 NPT or G/4 Exhaust -#0- (/8 NPT or G/8 available) Cylinder ports -O ring seal for NMUR standard (For non-nmur actuators, consult fatory) Installation, Filtration and Lubrication Valves have no limitations on mounting orientation. 40 to 50 micron fi ltration and general purpose lubricating oil ISO, STM viscosity grade recommended. mbient temperature range 5 F (5 C) to 25 F (50 C). Flow Rates Cv = 0.08 (Kv =.2) average for all ports (5 SCFM at 00 psi; 8.5 Nm3/h at 7 bar). For actuator speed rates see page 6. Options See page 6. FUNCTION PORT SIZE Cv Kv 3-Way 3/2 /4 NPT G/4 E5 NMUR Valve Product Number Selector asic Valve Number*.08 (.2).08 (.2) SINGLE SOLENOID/SPRING RETURN 2-POSITION E5SM N - - (coil code) E5SM N - - (coil code) * ll valves include O ring interface seals and #0-24 mounting screws. For #0- screws change N to N2. For M5 screws change N to N3. IN For coil code see page 6. dd suffix option here, if required. EX 5

6 DIRECT MOUNT CTUTOR VLVES SERIES C5 & E5 NMUR Solenoid Options NON H Z R D O U S SERVICE H Z R D O U S S E R V I C E M I S C VOLTGES & COIL CODES** NMUR OPTIONS VLVE TYPE DESCRIPTION SUFFIX DETIL* C5 E5 Spade Terminals (standard) None Strain Relief mini-din type connector, cord grip PG9 -HC /2 NPT conduit mini-din type connector -HCC 24V60 (024) 2VDC (D02) /2 NPT conduit, watertight, NEM 4-228L 0V50 (E0) 20V60 (20) 24VDC (D024) NOMINL COIL POWER C=8.5W DC=0.5W /2 NPT conduit, general purpose, NEM,2,3 -C50 220V50 (E220) 240V60 (240) 48VDC (D048) C=6W /2 NPT conduit, watertight, NEM 4 & 4X 240V50 (E240) DC=7W Hazardous Locations, UL listed, CS approved /2 NPT conduit, NEM 7 & 9, -XX -watertight, dusttight, NEM 4, 4X, 7 & 9, -XX 24V60 (024) 2VDC (D02) Flameproof (d) - TEX/IECEx 0V50 (E0) 20V60 (20) 24VDC (D024) C = 5.6W II 2 G Ex d II + H 2 T6...T3 220V50 (E220) 240V60 (240) 48VDC (D048) DC = 7.2W Ex d II + H 2 T6 to T3 Gb IP65/67/68 240V50 (E240) M20 x.5 conduit entry, asic standard -XN with Flameproof Junction ox -J-XN Hazardous Locations, UL listed, CS approved 2V60 (02) 6VDC (D006) low power, /2 NPT conduit, NEM, 7 & 9, -L-XX 24V60 (024) 2VDC (D02) Flameproof (d) - TEX/IECEx 48V60 (048) 24VDC (D024) C or DC II 2 G Ex d II + H 2 T6...T3 20V60 (20) 48VDC (D048) =.8W Ex d II + H 2 T6 to T3 Gb IP65/67/68 240V60 (240) 20VDC (D20) M20 x.5 conduit entry with Low power.8w coil -L-XN Intrinsic Safe, Factory Mutual/CS approved mini DIN connector with strain relief PG9 cord grip -HC-XISC with /2 NPT conduit entry -HCC-XISC 24VDC (D024) NOT Intrinsic Safe (ia) - TEX SYSTEM VOLTGE VILLE II 2 G EEx ia IIC T6 DC=.6 W MX With PG9 cable gland, mini -DIN type connector -HC-XISX6 with /2 NPT conduit entry -HCC-XISX6 Silencer/Dust Excluder For Solenoid Exhaust L4 (Not vailable For -XISC) * dd option number to basic valve number as suffi x ** dd coil code # to end of valve number Consult factory for applicable electrical operator * dd option number to basic valve number as suffi x. See pages 26/27, 28/29 and 30/3 for complete description. ** The coil code is shown within the parenthesis following the voltage. dd desired coil code to end of valve number NMUR ctuator Speed Chart This chart represents approximate actuator operation times under average load conditions at 80 psi (5.5 bar). Due to differing designs of quarter-turn actuators, breakaway friction, loading, internal airflow, inlet piping, fittings and exhaust port options, the values shown are intended as an estimate. Faster or slower times may actually be achieved. ctuator Volume in 3 (cm 3 ) Valve Type 5 (82) 0 (64) 25 (40) 50 (820) 00 (640) 50 (2460) 200 (80) 400 (6560) 600 (9840) 000 (6400) CTUTOR CYCLE TIME IN SECONDS C E C For double-acting actuators (open & close), use volume from selected actuator specifi cations and the chart for estimated speed. The times indicated are per shift. For spring return actuators, use open volume to obtain time from chart. ctuator spring loading may affect shift time. Slower speeds (adjustable) can always be accomplished by using Versa s leed Control Valves in the control valve exhaust port (see page 25). 6

7 SERIES C5 & E5 NMUR Dimensions Shown as inch (mm) Port markings shown are for valves with NPT threads. Port markings for valves with G threads are: () = IN; (2) = ; (3) = E; (4) = ; (5) = E. Option is shown for reference. SERIES C5 C.57 (39.9) MNUL OVERRIDE (Push-Type).47 (2) (4.7) (4.7) /4 NPT (G/4) TOP VIEW.34 (8.6).62 (5.7).75 (9.).78 (9.8).5 (38).26 () (2).47 (2) OTTOM VIEW LOCTING HOLE.25 DEEP(3.2).26 (6.6).74 (8.8) NOTE: THE FUNCTION OF THE VLVE IS FIELD CONVERTILE WHEN ORDERING 4 WY, CGS-42-N THE PLUG IS IN POSITION 4 (S SHOWN) WHEN ORDERING 3-WY, CGS--N THE PLUG IS IN POSITION 3 E ECOMES VENT WHEN USEN S 3-WY.34 (8.6) SERIES E5 C 50 /4 NPT (G/4) VENT PORT.57 (4.5) VENT.35 (8.9).63 (8) /4 NPT (G/4).25 (6.4). (8.).63 (8) SIDE VIEW (CGS) /4 NPT (G/4) INLET PORT END VIEW.47 (37.3).47 (2).47 (2).03 (26.2) TOP VIEW /4 NPT (G/4) NOTES : Dimensions show /4NPT body markings, G/4 body markings are: () = IN; (4) = ; (2) = ; (5) = E; (3) = E. Optons is shown for reference. E5 NMUR DIMENSIONS: Valve Type E5 Solenoid Option STNDRD, -228L -C50, -XX, -XN 0.44 (.2) 2.3 (58.7) INCHES (mm) 0.52 (3.2) 2.3 (58.7).73 (8.4) 2.39 (60.7) C5 NMUR DIMENSIONS: Valve Type CSG CGG/CXX INCHES (mm) Solenoid Options Standard, -228L C50, -XX, -XN -XISC, -XISX6 C C C C 3.7 (94.2) 4.2 (06.9).3 (38.3) 3.7 (94.2).885 (22.5).885 (22.5) 3.7 (94.2) 4.2 (06.9).3 (33.3) 3.7 (94.2).04 (26.4).04 (26.4) 3.79 (96.3) 4.29 (09.0).3 (33.3) 3.79 (96.3).45 (36.8).45 (36.8) 3.53 (89.7) 4.03 (02.4).3 (33.3) 3.53 (89.7).5 (29.2).5 (29.2) 7

8 DIRECT MOUNT CTUTOR VLVES STINLESS STEEL CONSTRUCTION SERIES C36 NMUR Stainless Steel 3 or 4-Way Solenoid Valves General Description The Versa C36 Series stainless steel NMUR mount actuator control valve is a high fl ow, bubbletight, 5-port solenoid valve. It is designed to mount directly to any NMUR actuator, thus reducing actuator response time and space. Installed costs are also lower as the need for tubing, fi ttings, brackets and assembly labor are greatly reduced. ll mounting screws and seals are included with the valve. The 5-port design allows the C36 NMUR valve to be ordered as either a 4-way for double acting actuators, or as a 3-way for spring return actuators. When the 3-way function is utilized, the unused exhaust port becomes an actuator vent where a fi lter/muffl er can be installed to prevent contaminants from entering either the valve or the actuator. The 5-port design allows the user to independently control actuator speed in either open or close direction by utilizing speed or bleed controls. Single or double solenoid 2-position models are available. Single solenoid spring return models utilize an air assisted spring return feature, assuring a positive return. Double solenoid valves may be used in applications where a momentary signal is required or in a fail in last shifted position actuator application. Double solenoid models are equipped with a detent that maintains the valve in the last shifted position, even in high vibration applications. ll solenoid actuators are solenoid/pilot type, which allows the use of smaller solenoids resulting in lower power consumption. This design assures a positive shift when the valve is energized and reduces the chance of coil burnout. Manual override for single or double solenoid valves is available as an option. Materials Valve body, actuating caps & internal parts: 36L stainless steel Valve seals: FKM (fl uorocarbon) Screws: stainless steel Solenoid parts: 304, 430F & 302 stainless steel internal parts; coil/solenoid housing per solenoid option selected Operating Pressure and Weights Valve Type *Operating Pressure Range Pneumatic General Service asic Valve Number* pproximate Weights Hazardous Service (-XX, -XN, -XIS_ ) (-XM_, -XIF_ ) Single Solenoid- Spring Return 25 to 50 psi (.8 to 0.3 bar).3 lbs (590 gms).6 lbs (725 gms) 2.5 lbs (30 gms) Double Solenoid 5 to 50 psi ( to 0.3 bar).9 lbs (860 gms) 2.6 lbs (80 gms) 4.3 lbs (950 gms) * For applications above 25 psi (8.6 bar) exhaust fl ow controls or muffl ers are recommended. Porting Size Inlet and Exhaust: /4 NPT Cylinder ports: O ring mount per NMUR standard Flow Rate Cv =.6 (Kv = 23.5) ctuator Speed See chart on page 6 for approximate operation times under load conditions at 80 psi (5.5 bar). Installation, Filtration and Lubrication Valves have no limitation on mounting orientation. 40 to 50 micron fi ltration is recommended Lubrication not required. mbient and media temperature range -5 F to 200 F (-20 to 93 C) Solenoid Options See page 9 C36 NMUR Valve Product Number Selector FUNCTION 4-way 5/2 SINGLE SOLENOID/SPRING RETURN, 2 POSITION CGS NE - - (coil code) DOULE SOLENOID DETENT, 2 POSITION CGG NE - - (coil code) 3-way 3/2 CGS NE - - (coil code) CGG NE - - (coil code) *ll valves include O ring interface seals and #0-24 mounting screws. For #0- screws change NE to NE2. For M5 screws change NE to NE3. dd suffi x option here if required. See coil code page 9. 8

9 SERIES C36 NMUR Solenoid Options Suffix Detail C36 NMUR DIMENSIONS Valve Type Solenoid Housing Material Voltages (Coil Codes) ll options available in all voltages, except where noted. Consult factory for other voltages. GENERL SERVICE SOLENOID OPTIONS HZRDOUS SERVICE (-XX, -XN, -XISC, -XISX6) NOMINL COIL POWER C/DC (watts) G General Purpose E /2 NPT conduit, NEM, 2, & 3* None Carbon Steel, Painted 6.0/7.0 N /2 NPT conduit, watertight, NEM 4 & 4X* Carbon Steel, Chromate plated 6.0/7.0 E Cord grip PG9 mini-din type connector, NEM 4 -HC Engineered polymer 6.5/0.5 R /2 NPT conduit, mini-din type connector, NEM 4 -HCC Engineered polymer 6.5/0.5 L * For high temperature coil include -HT Hazardous Location UL/CS (NEM 7& 9) Class I, Div 2 ( & ); Class I Div (C & D); Class II Div (E, F & G)* 5.6/7.2 /2 NPT conduit entry, asic standard -XX Carbon Steel, Chromate Plated.8//8 with Low power.8w coil -L-XX Carbon Steel, Chromate Plated 5.6/7.2 with potted coil -XX Carbon Steel, Chromate Plated 5.6/7.2 with Stainless housing coil housing -ST-XX Stainless Steel Flameproof (d)* - TEX/IECEx II 2 G Ex d II + H 2 T6...T3 Ex d II + H 2 T6 to T3 Gb IP65/67/68 2VDC (D02) H M20 x.5 conduit entry, asic standard -XN Carbon Steel, Chromate Plated 24VDC (D024) 5.6/7.2 with Low power.8w coil, -L-XN Carbon Steel, Chromate Plated 48VDC (D048).8//8 Z with potted coil -XN Carbon Steel, Chromate Plated 20V60 (20) 0V50 (E0) 5.6/7.2 with Stainless steel coil housing -ST-XN Stainless Steel 220V50 (E220) 240V60 (240) 5.6/7.2 R with Flamproof Junction ox -J-XN -XN w/luminum Epoxy Coated ox D O U II 2 G Ex d IIC T4...T6 Ex d IIC T4 to T6 Gb S with M20 x.5 conduit entry -XDS Stainless Steel w/ Junction ox 0.0/ with /2 NPT conduit entry -XDT Stainless Steel w/ Junction ox 0.0/ Encapsulated (mb), Increased Safety (e) Dust (td) - TEX/IECEx Notes II 2 G Ex e mb II T5, T6 * For high temperature coil add, -HT II 2 D Ex td 2 IP66/IP67 T00ºC,T85ºC Ex e mb II T5, T6 Gb (included in XM_, XIF_) Ex td 2 IP66/IP67 T00ºC,T85ºC Db L M20 x.5 Conduit entry -XM Engineered polymer ** 24 Volt DC Only N/4.0 O with 6-2mm ø cable gland -XMF Engineered polymer N/4.0 C /2 NPT conduit entry -XMF Engineered polymer Contact factory for other options in this series N/4.0 with 9-6mm ø cable gland -XMFF Engineered polymer Contact factory for applicable electrical operators N/4.0 T I Intrinsically Safe** FM/CS O Class I (Group,, C, D); Class II (Group E, F, G), CLSS III, DIV ** N/.6 N With PG9 cable gland, mini -DIN type connector -HC-XISC Engineered polymer N/.6 with /2 NPT conduit entry -HCC-XISC Engineered polymer Intrinsically Safe (ia)** - TEX II 2 G EEx ia IIC T6 IP65 With PG9 cable gland, mini -DIN type connector -HC-XISX6 Engineered polymer N/.6 with /2 NPT conduit entry -HCC-XISX6 Engineered polymer N/.6 Intrinsically Safe (ia)** - TEX/IECEx II 2 G Ex ia IIC T4...T6 Gb II 2 D Ex ia D 2 T30 C...T80 C Ex ia IIC T4...T6 Gb Ex ia IIIC T30 C...T80 C Db with M20 x.5 conduit entry -XIF Engineered polymer N/0.8 with /2 NPT conduit entry -XIFF Engineered polymer N/0.8 M I Manual Override, un-guarded push and hold (not available with all solenoid options) -ME S Solenoid exhaust adapter, /8 NPT -H2 C Silencer/Dust Excluder for Solenoid Exhaust (not available -XISC or -XISX6) -L4 Typical CSG NE-XM-20 Top View.63 Inches (4.4) (mm) Dimensions HZRDOUS SERVICE (-XM, -XIF) C C C.44 Inches (36.6) (mm) Single solenoid, spring return 3-Way or 4-Way Double solenoid 3-Way or 4-Way Inches (mm) Inches (mm) 5.62 (42.7) 8.70 (22).44 (36.6).44 (36.6) 2.33 (59.) 2.33 (59.) 5.67 (44) 8.79 (233.2).44 (36.6).44 (36.6) 2.33 (59.) 2.33 (59.) 6.59 (67.3) 0.6 (269.2) 2.56 (65) 2.56 (65) 4.27 (08.5) 4.27 (08.5) Typical CGG NE-XX-20 Side View For warranty information and/or any additional information with regards to installation, operation and service warnings, please consult factory. Typical CGG NE-XM_-20 Side View 9

10 ODYPORTED VLVES LUMINUM CONSTRUCTION General Description Versa C5 and C7 valves are 5 port/2- position or 5 port/3-position, high fl ow, bodyported, solenoid/pilot valves. They can be provided with single solenoid or double solenoid actuators. Manual override (guarded-push to operate, turn to lock) is standard on all models. Other options are available. ctuator positioning is possible with the use of 3-position valves since all C5 and C7 valves are leak free/bubbletight. The standard valve is supplied with DIN style coil, but other options are available making the most exacting and demanding specifi cations or applications easy to satisfy. Valve Type Single Solenoid/spring return (2-position) Double Solenoid/detented (2-position) Double Solenoid/spring centered (3-position) Size Series C5 C7 C5 C7 C5 C7 Porting Size Inlet, outlet and exhaust /8 NPT or G/8-Series C5 /4 NPT or G/4-Series C7 Installation, Filtration and Lubrication Valves have no limitations on mounting orientation. 40 to 50 micron fi ltration and general purpose lubricating oil ISO, STM viscosity grade recommended. mbient temperature range 5 F (5 C) to 25 F (50 C). SERIES C5/C7 odyported 3-Way*/4-Way Solenoid Valves Materials Valve body and plunger: anodized aluminum ctuating Caps: solenoid anodized aluminum spring cap synthetic resin Pilot Piston: synthetic resin Valve seals: plunger and body FKM (fl uorocarbon) pilot piston NR (nitrile) Screws: stainless steel Solenoid parts: sleeve, plunger & spring 304 & 430F stainless steel coils epoxy molded with 3 spade terminals (std) or 2 or 3 wire leads (opt) coil cover (opt.-when applicable) zinc chromate plated steel Operating Pressure Range Pneumatic 5-5 psi (-8 bar) 25-5 psi (.7-8 bar) 0-5 psi (0.7-8 bar) 5-5 psi (-8 bar) 5-5 psi (-8 bar) 25-5 psi (.7-8 bar) pproximate Weights Ordinary Service 0.5 lbs. (235 g) 0.7 lbs. (300 g) 0.87 lbs. (395 g).0 lbs. (454 g) 0.87 lbs. (395 g).0 lbs. (454 g) Hazardous Service 0.8 lbs. (363 g).0 lbs. (454 g).2 lbs. (545 g).3 lbs. (590 g).2 lbs. (545 g).3 lbs. (590 g) Pressure ranges may change based on solenoid option. See page 6. bar MPa = 0 For higher pressure applications, consult factory. Flow Rates (average for all ports) Cv = 0.75 (Kv = ) for /8 NPT (G/8)-Series C5 Cv =.6 (Kv = 23) for /4 NPT (G/4)-Series C7 Options Suffix Manual Override: none Standard on basic valves, guarded-push to operate, turn to lock - -CML unguarded-push to operate, twist to lock For solenoid options see page 6 (same options utilized as Direct Mount Valves). C5/C7 odyported Valve Product Number Selector For coil code see page 6. asic Valve Number* FUNCTION* SIZE SERIES PORT SIZE Cv (Kv) SINGLE SOLENOID/SPRING RETURN, 2 POSITION DOULE SOLENOID/ DETENT, 2 POSITION DOULE SOLENOID/SPRING CENTERED, 3 POSITION locked Center Exhaust Ports open E IN E E IN E E IN E E IN E 4-WY 5/2 & 5/3 C5 C7 /8 NPT G/8 /4 NPT G/ () 0.75 ().6 (23).6 (23) CSG (coil code) CSG (coil code) CSG-42- -(coil code) CSG (coil code) CGG (coil code) CGG (coil code) CGG-42- -(coil code) CGG (coil code) CXX (coil code) CXX (coil code) CXX (coil code) CXX (coil code) CXX-43- -(coil code) CXX-44- -(coil code) CXX (coil code) CXX (coil code) * 3-Way valve can be obtained by plugging one port of a 4-way. For 3-way NC plug port (4); for 3-way NO plug port (2). dd suffi x here, if required. 0

11 odyported Series C5 & C7 Dimensions J I H F 5/2 SINGLE SOLENOID E G C K ELECTRICL (DIN) CONNECTOR CN E ROTTED S SHOWN. NEM 4 PPROVED ( SUFFIX DETIL -HC ) J I H asic Valve Dimensions C5 C7 F 5/2 & 5/3 DOULE SOLENOID E C E F G H J K L inch /8 NPT 2.47 mm G/ inch /4 NPT 2.52 mm G/ G C K Four Way C5 Port and Mounting Holes Dimensions Valve body less right & left actuating caps shown. Top View *(2).44Ø THRU &.234Ø C ORE X.28 DEEP * (6-SCREWS -/4 LONG RECOMMENDED, PS-06-20) Side View SHOWN IN INCH MM (2) /8 NPT or G/8 Four Way C7 Port and Mounting Holes Dimensions Valve body less right & left actuating caps shown. Top View *(2).72Ø THRU &.28Ø C ORE X.38 DEEP * (8-SCREWS -/2 LONG RECOMMENDED, PS-08-24) Side View SHOWN IN INCH MM (2) /4 NPT or G/ ottom View (2).44 Ø THRU ottom View (2).72 Ø THRU (3) /8 NPT or G/8 (3) /4 NPT or G/4 NOTE: VLVES SUPPLIED WITH G THREDS HVE PORTS MRKED S FOLLOWS: IN=, =2, E=3, =4, E=5

12 ODYPORTED VLVES RSS CONSTRUCTION General Description SERIES V odyported 3-Way & 4-Way Solenoid Valves Operating Pressures and Weights Versa Series V valves are full flow valves, available in /8, /4, 3/8, /2, 3/4 and NPT port sizes. Ports of /8 to /2 ISO 228 G threads are also available. Three-way designs are provided with 3 ports; four-way designs have 5 ports. Each is available for 2-position or 3-position service. Standard size O ring seals provide bubbletight sealing and ease of repair, if necessary. Each valve is solenoid/pilot actuated, which enables the use of physically small solenoids and resultant low power consumption, and also assures a large positive shifting force without fear of coil burn-out. complete selection of electrical connections, area classifi cations, and power requirements makes the most exacting and demanding specifi cations or applications easy to satisfy. Materials Valve body: forged brass ctuating Caps: solenoid forged brass spring cap diecast aluminum Internal parts (wetted): rod brass Valve seals: NR (nitrile), standard size O rings Screws: zinc plated steel Solenoid parts: sleeve, plunger & spring 304 & 430F and 302 stainless steel coils epoxy molded with 2 or 3 wire leads (Std.) coil cover (Std) zinc chromate plated steel Valve Type Port Size Operating Pressure Range Pneumatic pproximate Weights Ordinary Service Hazardous Service 3-way 4-way 3-way 4-way lbs. kg lbs. kg lbs. kg lbs. kg Single Solenoid/spring return (2-position) /8 or /4 3/8 or /2 3/4 or psi (2.8-2 bar) psi (3.5-2 bar) Double Solenoid/momentary contact (2-position) /8 or /4 3/8 or /2 3/4 or psi (.4-2 bar) Double Solenoid/spring centered (3-position) /8 or /4 3/8 or /2 3/4 or psi (2.8-2 bar) psi (3.5-2 bar) Pressure ranges may change based on solenoid option. See page 27/29. MPa = bar 0 Weights shown for hazardous service are for type -XX. For other suffi x options consult factory. Porting Size Inlet, outlet and exhaust /8 NPT, /4 NPT, 3/8 NPT, /2 NPT, 3/4 NPT, or NPT. Or G/8, G/4, G3/8, G/2 ISO 228. Flow Rates Cv Factor (all ports) verage Kv Factor (all ports) SCFM Flow* Nm3/h Port Size /8 NPT or G/ /4 NPT or G/ /8 NPT or G3/ /2 NPT or G/ /4 NPT NPT Installation, Filtration and Lubrication Valves have no limitations on mounting orientation. 40 to 50 micron filtration and general purpose lubricating oil ISO, STM viscosity grade recommended. mbient temperature range -0 F (-23 C) to 200 F (95 C). * ssumptions: Flow = air Inlet pressure = 00 psi (7 bar) P = 40 psi (3 bar) Outlet abs = 74.7 psi (5 bar) Temp = 68 F (20 C) SG =.0 2

13 Series V odyported Valve Product Number Selector SIC VLVE NUMER Function 3-way, 3/2 Normally Closed 3-way, 3/3 Three Position Port Size (NPT)* /8 /4 3/8 /2 3/4 Double Solenoid/ Flow Single Solenoid/Spring Momentary Contact Double Solenoid/Spring Centered 3-position C V (Kv) Return 2-position 2-position locked Center Exhaust Ports Open (20.3) (26.) (49.3) (58.0) (40.6) (6.0) VSG-2-U-(coil code) VSG-3-U-(coil code) VSG-342-U-(coil code) VSG-352-U-(coil code) VSG-362-U-(coil code) VSG-372-U-(coil code) VGG-2-U-(coil code) VGG-3-U-(coil code) VGG-342-U-(coil code) VGG-352-U-(coil code) VGG-362-U-(coil code) VGG-372-U-(coil code) VXX-23-U-(coil code) VXX-33-U-(coil code) VXX-3423-U-(coil code) VXX-3523-U-(coil code) VXX-3623-U-(coil code) VXX-3723-U-(coil code) CT. CT. CT. CT. CT. P T P T P 3-way, 3/2 Normally Open 3-way, 3/3 Three Position /8 /4 3/8 /2 3/ (20.3) (26.) (49.3) (58.0) (40.6) (6.0) VGS-22-U-(coil code) VGS-32-U-(coil code) VGS-3422-U-(coil code) VGS-3522-U-(coil code) VGS-3622-U-(coil code) VGS-3722-U-(coil code) SEE OVE SEE OVE CT. P 4-way, 5/2 & 5/3 /8 /4 3/8 /2 3/ (20.3) (26.) (49.3) (58.0) (40.6) (6.0) VSG-4222-U-(coil code) VSG-42-U-(coil code) VSG-4422-U-(coil code) VSG-4522-U-(coil code) VSG-4622-U-(coil code) VSG-4722-U-(coil code) VGG-4222-U-(coil code) VGG-42-U-(coil code) VGG-4422-U-(coil code) VGG-4522-U-(coil code) VGG-4622-U-(coil code) VGG-4722-U-(coil code) VXX-4223-U-(coil code) VXX-43-U-(coil code) VXX-4423-U-(coil code) VXX-4523-U-(coil code) VXX-4623-U-(coil code) VXX-4723-U-(coil code) VXX-4224-U-(coil code) VXX-44-U-(coil code) VXX-4424-U-(coil code) VXX-4524-U-(coil code) VXX-4624-U-(coil code) VXX-4724-U-(coil code) CT. CT. CT. CT. CT. CT. CT. For coil code see page 27 for ordinary location or page 29 for hazardous location. * Valves with ISO 228 G threads have same Cv (Kv) fl ow factors as corresponding NPT port sizes. To indicate model number of valves with G thread, add suffi x -2 to basic valve number shown. For example: VSG-2-U becomes VSG-2-U-2. SERIES V ODYPORTED SOLENOID OPTIONS (Consult page number indicated for complete description of desired option.) Coil & Coil Housing - nonhazardous location Suffi x none: Std coil & housing, (page 30) -HT: Class H coil, (page 3) -HC or -HCC: DIN style coil & connector, (page 30) : Potted coil, (page 30) Manual Override Suffi x -G,-M or -M5R: (page 3) Seals Suffi x -: High nitrile resilient seals, (page 3) -55: FKM (fl uorocarbon), (page 3) Voltage (coil code) -Nonhazardous location operators - (page 26/27). Hazardous location operators - (page 28/29). For other coil voltages consult factory. P 3 P P Solenoid Operator - nonhazardous location Suffi x none: Std coil & housing, (page 26/27) -HC or -HCC: DIN style coil and connector, (page 26/27) Solenoid Operator - hazardous location Suffi x -L: Low power (.8 W) operator, (page 28/29) -XX -XN -J-PS-XN -XDS, T (page 28/29) -XIF, E, F -HC-XISC, -HCC-XISC -HC-XISX6, -HCC-XISX6 -XM, E, F, G -XMF, E, F, G Misc - nonhazardous & hazardous Suffix -E4 Silencer/Dust Excluder For Solenoid Exhaust (not available for -XISC or -XISX6) P

14 ODYPORTED VLVES RSS CONSTRUCTION THREE-WY H Mounting Holes (2) F E IN D C ODYPORTED SERIES V Dimensions EX C Of Valve SINGLE SOLENOID ODY DETIL asic Valve Dimensions C D E F HØ NPT or G in mm in mm in mm in mm in mm in mm in mm /8 -/ /8 -/ / DOULE SOLENOID 4 DPTER (OPTIONL - SEE NOTE ELOW) 4 DPTER (OPTIONL - SEE NOTE ELOW) 3 4 (9 mm) D MX 3 (9 mm) 4 D MX 2 NPT CONDUIT CONNECTION X 2 NPT CONDUIT CONNECTION X F C 3 (0 mm) H J D E 3 8 (35 mm) MNUL OVERRIDE (OPTIONL) asic Valve Dimensions C C* D D E F H J K K* X NPT or G in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8 - / /8 - / / (0 mm) C/C* K/K* K/K* C/C* 3 (0 mm) H J D E 3 8 (35 mm) MNUL OVERRIDE (OPTIONL) *Dimensions for Spring-Centering Valves. NOTE: dapter is supplied when specifi ed by adding suffi x -H to product number FOUR-WY F E H Mounting Holes (3) EXH C C D IN C EXH ODY DETIL DOULE SOLENOID asic Valve Dimensions C D E F HØ NPT or G in mm in mm in mm in mm in mm in mm in mm /8 - / /8 - / / SINGLE SOLENOID DOULE SOLENOID 4 DPTER (OPTIONL - SEE NOTE ELOW) 4 DPTER (OPTIONL - SEE NOTE ELOW) 3 4 (9 mm) DMX 8 NPT EXPILOT PORT 3 4 (9 mm) D MX F NPT CONDUIT CONNECTION 2 K C X MX 3 (0 mm) 8 NPT EXPILOT PORT FOR H 8 THRU ONLY 2 J D E FOR 4 3 & 4 ONLY 3 8 (35 mm) MNUL OVERRIDE (OPTIONL) 3 (0 mm) 2 NPT CONDUIT CONNECTION K/K* C/C* K/K* C/C* X 3 (0 mm) H J D E 3 8 (35 mm) MNUL OVERRIDE (OPTIONL) asic Valve Dimensions C C* D D E F H J K K* X NPT or G in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8 - / /8 - / / *Dimensions for Spring-Centering Valves. NOTE: dapter is supplied when specifi ed by adding suffi x -H to product number Dimensions shown are for basic valve as listed on previous page. Some options may change the dimensions, for which consult factory. 4

15 ODYPORTED VLVES STINLESS STEEL CONSTRUCTION General Description 3-WY DIRECT SOLENOID VLVES Two valve series, Series E and Series E5, comprise the direct actuated, 3 port/2 position valves. The main difference between the two series is physical size and weight, Series E being the greater of the two. oth series offer high reliability at low cost. Stainless steel construction provides the compatibility for use with many aggressive media and environments. variation of the valve type provides electrical quick exhaust valves. These valves function the same as a 3-way valve, but a larger capacity exhaust and rapid response to slight pressure differential during the de-energized portion of the cycle, results in a more rapid evacuation of the controlled device than would be expected with a standard 3-way valve. Materials Valve body, 430F stainless steel Valve seals: Nitrile (una N) Solenoid parts: sleeve, plunger & spring 304, 430F and 302 stainless steel coils epoxy molded coil cover (when applicable) zinc chromate coated steel Installation, Filtration and Lubrication Valves have no limitations on mounting orientation. 40 to 50 micron fi ltration and general purpose lubricating oil ISO, STM viscosity grade recommended. mbient temperature range 0 F (-8 C) to 80 F (82 C). 3-WY DIRECT SOLENOID VLVE PRODUCT NUMER SELECTOR Function 3-Way, 3/2 Normally Closed Exhaust to tmosphere (For Piped Exhaust add -H to ESM and -H2 to E5SM valve number) Maximum Operating Pressure Differential 50 psi (0.0 bar) 00 psi (6.9 bar) 75 psi (5.2 bar) 60 psi (4. bar) 50 psi (3.4 bar) 30 psi (2. bar) 20 psi (.4 bar) Vacuum (C only) SIC VLVE NUMER Single Solenoid/Spring Return, 2 Position Series E Series E5 Flow Cv (Kv) /8 NPT /4 NPT /8 NPT Inlet Exhaust ESM-0-34-* ESM-0-44-* ESM-0-66-* ESM-0-86-* ESM-0-26-* ESM-0-66-* ESM * ESM * ESM * ESM * ESM * ESM * E5SM-0-34-* E5SM-0-44-* E5SM-0-64 E5SM-0-84-*.06 (.87).06 (.5).2 (3.).2 (3.).26 (3.8).26 (3.8).56 (8.).79 (.5).06 (.5).06 (.5).2 (3.).06 (.5).2 (3.).06 (.5).2 (3.).2 (3.) 3-Way, 3/2 Normally Open 3-Way, 3/2 Normally Closed QUICK EXHUST MPa = bar 0 50 psi (0.0 bar) 25 psi (8.6 bar) 00 psi (6.9 bar) 00 psi (6.9 bar) 00 psi C only (6.9 bar) 75 psi (5.2 bar) 75 psi (5.2 bar) 75 psi DC only (5.2 bar) Operating Pressure 5-50 psi (0.3-0 bar) 5-50 psi (0.3-0 bar) 5-00 psi ( bar) 5-00 psi ( bar) ESM H-* ESM H-* ESM H-* ESM H-* ESM H-* 3-WY DIRECT SOLENOID OPTIONS (Consult page number indicated for complete description of desired option.) Series E Suffi x -HC or _HCC XDS or T -XX -XX PS-XX -XM, E, F or G -XMF, E, F or G -XIF, F SOLENOID OPERTOR (nonhazardous location) DIN style coil & connector, (page 26/27) Potted coil, (page 30) SOLENOID OPERTOR - (hazardous location) Flameproof (page 28/29) Encapsulation (page 28/29) Intrinsically Safe (page 28/29) Series E5 Suffi x -HC or -HCC -L-XX; -L-XN XX -XN -J-PS-XN -XX ESM H-* ESM H-* ESM H-* ESM H-* ESM H-* - /4 NPT Inlet & Outlet 3/4 NPT Exhaust EQE * EQE * * dd coil code to valve number (ordinary page 27, hazardous page 29). -HC-XISC, -HCC-XISC -HC-XISX6, -HCC-XISX6 E5SM H2-* E5SM H2-* E5SM H2-* /4 NPT Inlet & Outlet 3/8 NPT Exhaust E5QE * E5QE *.06 (.87).06 (.87).06 (.5).06 (.5).06 (.5).2 (3.).2 (3.).06 (.5).06 (.87).055 (.80).06 (.5).075 (.) DIMENSIONS inches FOR SIC VLVE mm Series E Series E Non Hazard Hazard. N.C N.O Non Hazard. Hazard. Series E Quick Exhaust Non Hazard Non Hazard Hazard..06 (.5).06 (8.7).06 (.5).26 (3.8).06 (.5).2 (3.).26 (3.8).06 (.5) 8.8 (28) 3.3 (48) 8.8 (28) 3.3 (48) N.C N.O Non Hazard. Hazard. Series E5 Quick Exhaust Non Hazard. MISCELLNEOUS -3 FKM (fluorocarbon) seals (Page 3) -3 -HT Class H coil (page 3) -HT -M,-M5R,-ME Manual Override (page 3) E4 Silencer/Dust Excluder for Solenoid Exhaust -L Hazard Hazard.

16 ODYPORTED VLVES STINLESS STEEL CONSTRUCTION General Description Versa Series C36 stainless steel valve is a high fl ow, 3 or 5 port solenoid valve that utilizes a fl uorocarbon elastomer seal packed plunger that provides bubbletight performance along with long, trouble-free product life. The design also provides the highest fl ow in the smallest package. Stainless steel bodies, actuating caps and internal parts allow use in the most aggressive environments. The C36 Series is available as 4-Way, for double acting devices, or 3-Way for spring return devices. The 3-Way function can be specifi ed as either normally open or normally closed. ll solenoid actuators are solenoid/pilot type, which allows the use of small solenoids and results in low power consumption. Solenoid/pilots also provide a positive shifting force that assures the valve shifts, thus reducing the chance of coil burnout. Single solenoid-spring return models utilize an air assisted return feature that assures a positive return. Double solenoid models are equipped with a detent that maintains the valve in the last shifted position, even in high vibration environments. complete selection of electrical connections, power requirements and area classifi cations makes the Versa C36 the valve of choice for demanding applications. solenoid latch option for single solenoid-spring return 3-Way & 4-Way valves is available for the C36 Series. With the loss of solenoid signal, the valve shifts closed and cannot be re-shifted until manually reset. Operating Pressures & Weights Valve Type Operating Pressure Range Pneumatic General Service Hazardous Service (-XX, -XN, -XIS) Hazardous Service (-XM, -XIF) Single Solenoid- Spring return 25 to 50 psi (.8 to 0.3 bar).3 lbs (590 gms)*.6 lbs (725 gms)* 2.5 lbs (30 gms)* Single Solenoid- Latching 3-Way 25 to 50 psi (.8 to 0.3 bar).6 lbs (725 gms)*.9 lbs (860 gms)* 2.8 lbs (270 gms)* Double Solenoid- Detented 5 to 50 psi (.0 to 0.3 bar).9 lbs (860 gms)* 2.6 lbs (80 gms)* 4.3 lbs (950 gms)* Porting Sizes Inlet cylinder & exhaust: /4 NPT Installation, Filtration and Lubrication Valves have no limit on mounting orientation. 40 to 50 micron fi ltration is recommended Lubrication not required mbient & media temperature range -5 F to 200 F (-20 to 93 C) asic Valve Number FUNCTION 4-Way 5/2 SERIES C36 odyported 3-Way & 4-Way Solenoid Valves *Weights shown are for 3-Way valves. For 4-Way add 0. lbs (45 gms). Materials Valve body, actuating caps & internal parts: 36L stainless steel Valve seals: FKM (fl uorocarbon) Screws: stainless steel Solenoid internal parts: 304, 430F & 302 stainless steel Coil/solenoid housing: per solenoid option selected Flow Rate Cv = 2.0 (Kv = 29.3) Options See page 7 Series C36 ODYPORTED VLVE Product Number Selector SINGLE SOLENOID/SPRING DOULE SOLENOID LTCHING, SINGLE SOLENOID RETURN, 2 POSITION DETENT, 2 POSITION SPRING RETURN CSG (coil code) CGG (coil code) CG N- -(coil code) 3-Way NC 3/2 CSG (coil code) CGG (coil code) CG N- -(coil code) 3-Way NO 3/2 CGS (coil code) CGG (coil code) CG N- -(coil code) dd suffi x option here as required. See coil code below. 6

17 Series C36 odyported Solenoid Options Suffix Detail Solenoid Housing Material Voltages (Coil Codes) ll options available in all voltages, except where noted. Consult factory for other voltages. NOMINL COIL POWER C/DC (watts) G General Purpose E /2 NPT conduit, NEM, 2, & 3* None Carbon Steel, Painted 6.0/7.0 N /2 NPT conduit, watertight, NEM 4 & 4X* Carbon Steel, Chromate plated 6.0/7.0 E Cord grip PG9 mini-din type connector, NEM 4 -HC Engineered polymer 6.5/0.5 R /2 NPT conduit, mini-din type connector, NEM 4 -HCC Engineered polymer 6.5/0.5 L * For high temperature coil include -HT Hazardous Location UL/CS (NEM 7& 9) Class I, Div 2 ( & ); Class I Div (C & D); Class II Div (E, F & G)* 5.6/7.2 /2 NPT conduit entry, asic standard -XX Carbon Steel, Chromate Plated.8//8 with Low power.8w coil -L-XX Carbon Steel, Chromate Plated 5.6/7.2 with potted coil -XX Carbon Steel, Chromate Plated 5.6/7.2 with Stainless housing coil housing -ST-XX Stainless Steel Flameproof (d)* - TEX/IECEx II 2 G Ex d II + H 2 T6...T3 Ex d II + H 2 T6 to T3 Gb IP65/67/68 2VDC (D02) H M20 x.5 conduit entry, asic standard -XN Carbon Steel, Chromate Plated 24VDC (D024) 5.6/7.2 with Low power.8w coil, -L-XN Carbon Steel, Chromate Plated 48VDC (D048).8//8 Z with potted coil -XN Carbon Steel, Chromate Plated 20V60 (20) 0V50 (E0) 5.6/7.2 with Stainless steel coil housing -ST-XN Stainless Steel 220V50 (E220) 240V60 (240) 5.6/7.2 R with Flamproof Junction ox -J-XN -XN w/luminum Epoxy Coated ox D O U II 2 G Ex d IIC T4...T6 Ex d IIC T4 to T6 Gb S with M20 x.5 conduit entry -XDS Stainless Steel w/ Junction ox 0.0/ with /2 NPT conduit entry -XDT Stainless Steel w/ Junction ox 0.0/ Encapsulated (mb), Increased Safety (e) Dust (td) - TEX/IECEx Notes II 2 G Ex e mb II T5, T6 * For high temperature coil add, -HT II 2 D Ex td 2 IP66/IP67 T00ºC,T85ºC Ex e mb II T5, T6 Gb (included in XM_, XIF_) Ex td 2 IP66/IP67 T00ºC,T85ºC Db L M20 x.5 Conduit entry -XM Engineered polymer ** 24 Volt DC Only N/4.0 O with 6-2mm ø cable gland -XMF Engineered polymer N/4.0 C /2 NPT conduit entry -XMF Engineered polymer Contact factory for other options in this series N/4.0 with 9-6mm ø cable gland -XMFF Engineered polymer Contact factory for applicable electrical operators N/4.0 T I Intrinsically Safe** FM/CS O Class I (Group,, C, D); Class II (Group E, F, G), CLSS III, DIV ** N/.6 N With PG9 cable gland, mini -DIN type connector -HC-XISC Engineered polymer N/.6 with /2 NPT conduit entry -HCC-XISC Engineered polymer Intrinsically Safe (ia)** - TEX II 2 G EEx ia IIC T6 IP65 With PG9 cable gland, mini -DIN type connector -HC-XISX6 Engineered polymer N/.6 with /2 NPT conduit entry -HCC-XISX6 Engineered polymer N/.6 Intrinsically Safe (ia)** - TEX/IECEx II 2 G Ex ia IIC T4...T6 Gb II 2 D Ex ia D 2 T30 C...T80 C Ex ia IIC T4...T6 Gb Ex ia IIIC T30 C...T80 C Db with M20 x.5 conduit entry -XIF Engineered polymer N/0.8 with /2 NPT conduit entry -XIFF Engineered polymer N/0.8 M I Manual Override, un-guarded push and hold (not available with all solenoid options) -ME S Solenoid exhaust adapter, /8 NPT -H2 C Silencer/Dust Excluder for Solenoid Exhaust (not available -XISC or -XISX6) -L4 Typical CSG XX-20 Top View Dimensions.62 (4.) E 5 IN E 3 Typical CSG XX-20 Side View Dimensions SOLENOID OPTIONS VLVE TYPE 3-Way Single Solenoid, Spring Return Inches (mm) GENERL SERVICE HZRDOUS SERVICE (-XX, -XN, -XISC, -XISX6) HZRDOUS SERVICE (-XM_, -XIF_) C C C 5.3 (35.0).04 (26.4) 2.3 (54.2) 5.4 (37.5).44 (36.6) 2.30 (58.5) 6.3 (60.3) 2.56 (65) 4.3 (04.8) Typical CGG XX-20 Side View 4-Way Single Solenoid, Spring Return Inches (mm) 5.8 (47.7).04 (26.4) 2.3 (54.2) 5.9 (50.2).44 (36.6) 2.30 (58.5) 6.8 (73.0) 2.56 (65) 4.3 (04.8) 3-Way Double Solenoid, Detented Inches (mm) 8.33 (2.6).04 (26.4) 2.3 (54.2) 8.53 (26.8).44 (36.6) 2.30 (58.5) 0.33 (262.4) 2.56 (65) 4.3 (04.8) 4-Way Double Solenoid, Detented Inches (mm) 8.83 (22.3).04 (26.4) 2.3 (54.2) 9.03 (229.5).44 (36.6) 2.30 (58.5) 0.83 (275.0) 2.56 (65) 4.3 (04.8) Typical CGG XM_-20 Side View 3-Way Double Solenoid, Latching* Inches (mm) 6.4 (62.9).04 (26.4) 2.34 (59.4) 6.5 (65.5) * dd 0.5 (2.7 mm) to dimension for 4-Way Latch Valve For dimensions XD_ consult factory.44 (36.6) 2.34 (59.4) 7.4 (88.2) 2.56 (65) 4.3 (04.8) Typical CG N-XX-20 Side View 7

18 ODYPORTED VLVES STINLESS STEEL CONSTRUCTION SERIES V36 odyported 3-Way and 4-Way Solenoid Valves General Description Versa Series V36 valves are available in /4 NPT, 3/8 NPT, or /2 NPT port sizes. Three-way designs are provided with 3 ports; four-way valve 5 ports. Each is available for 2-position or 3- position service. Investment cast 36 stainless steel bodies and actuating caps, coupled with 36 stainless steel internals makes this valve series compatible for use with aggressive media and environments. Each valve is solenoid/pilot actuated, which enables the use of physically small solenoids and resultant low power consumption, and also assures a large positive shifting force without fear of coil burnout. complete selection of electrical connections, area classifi cations, and power requirements makes the most exacting and demanding specifi cations or applications easy to satisfy Materials Valve body, actuating caps, internal parts: 36 stainless steel Valve seals: FKM (fl uorocarbon) Screws: stainless steel Solenoid parts: sleeve, plunger & spring 304, 430F and 302 stainless steel coils epoxy molded coil cover (when applicable) zinc chromate plated steel Porting Sizes Inlet, outlet, & exhaust: /4 NPT, 3/8 NPT, or /2 NPT Flow Rates (average for all ports) /4 NPT: C V =.8 (K V = 26) 3/8 NPT: C V = 2.0 (K V = 29) /2 NPT: C V = 5.5 (K V = 80) Operating Pressures and Weights Valve Type Port Size Operating Pressure Range Pneumatic pproximate Weights Ordinary Service Hazardous Service 3-way 4-way 3-way 4-way lbs. kg lbs. kg lbs. kg lbs. kg Single Solenoid/spring return (2-position) /4 & 3/8 NPT /2 NPT psi (2.8-2 bar) Double Solenoid/momentary contact (2-position) /4 & 3/8 NPT /2 NPT psi (.4-2 bar) Double Solenoid/spring centered (3-position) /4 & 3/8 NPT /2 NPT psi (2.8-2 bar) Pressure range may change based on solenoid options. See page 27/29. MPa = bar 0 Weights shown for hazardous service are for -XX type. For other suffi x options consult factory. Installation, Filtration and Lubrication Valves have no limitations on mounting orientation. 40 to 50 micron fi ltration and general purpose lubricating oil ISO, STM viscosity grade recommended. mbient temperature range -0 F (-23 C) to 200 F (95 C). 8

19 Function Port Size (NPT)* Series V36 odyported Valve Product Number Selector SIC VLVE NUMER Flow Double Solenoid/ Double Solenoid/Spring Centered Single Solenoid/Spring Momentary Contact 3-position CV (Kv) Return, 2-position 2-position locked Center Exhaust Ports Open 3-Way, 3/2 Normally Closed /4 3/8 / (26) (29) (80) VSG-3-U-36-* VSG-342-U-36-* VSG-352-U-36-* VGG-3-U-36-* VGG-342-U-36-* VGG-352-U-36-* CT. P CT Way, 3/3 Three Position /4 3/8 / (26) (29) (80) P T CT. CT. P T CT. VXX-33-U-36-* VXX-3423-U-36-* VXX-3523-U-36-* Way, 3/2 Normally Open /4 3/8 / (26) (29) (80) VGS-32-U-36-* VGS-3422-U-36-* VGS-3522-U-36-* SEE OVE Way, 3/3 Three Position /4 3/8 / (26) (29) (80) CT. P SEE OVE Way, 5/2 & 5/3 /4 3/8 / (26) (29) (80) VSG-42-U-36)-* VSG-4422-U-36)-* VSG-4522-U-36-* VGG-42-U-36-* VGG-4422-U-36-* VGG-4522-U-36-* VXX-43-U-36-* VXX-4423-U-36-* VXX-4523-U-36-* VXX-44-U-36-* VXX-4424-U-36-* VXX-4524-U-36-* CT. CT. CT. CT. CT. CT. CT. P P P P * dd coil code to valve number (ordinary page 27, hazardous page 29). SERIES V36 ODYPORTED SOLENOID OPTIONS (Consult page number indicated for complete description of desired option) Coil & Coil Housing nonhazardous location Suffi x none: Std coil & housing, (page 30) -HT: Class H coil, (page 3) -HC or -HCC: DIN style coil & connector, (page 30) : Potted coil, (page 30) Manual Override Suffi x -ME: Manual override (page 3) Misc Suffi x -L4: Silencer/Dust Excluder for Solenoid Exhaust (not available for -XISC or -XISX6) Solenoid Operator nonhazardous location Suffi x none: Std coil & housing, (page 26/27) -HC or -HCC: DIN style coil and connector, (page 26/27) Solenoid Operator - hazardous location Suffi x -ST: Stainless steel coil cover (page 30) -L-XX;-L-XN Low power (.8 W) operator, (page 28/29) -XX -XX; -XN -XN -J-PS-XN -XDS,T (page 28/29) -XIF, F -HC-XISC, -HCC-XISC -HC-XISX6, -HCC-XISX6 -XM, E, F, G -XMF, E, F, G Voltage (coil code) - Nonhazardous location operators - (page 26/27) Hazardous Location operators - (Page 28/29) For other coil voltages consult factor. 9

20 ODYPORTED VLVES STINLESS STEEL CONSTRUCTION THREE-WY H Mounting Holes (2) F E SINGLE SOLENOID ODYPORTED SERIES V36 Dimensions IN D C EX C Of Valve ODY DETIL SIC VLVE DIMENSIONS C D E F HØ NPT in mm in mm in mm in mm in mm in mm in mm / / / DOULE SOLENOID 8 DPTER (OPTIONL - SEE NOTE ELOW) 8 DPTER (OPTIONL - SEE NOTE ELOW) 9 6 (9 mm) 2 NPT CONDUIT CONNECTION X D MX EXPILOT PORT 9 (5 mm) 6 2 NPT CONDUIT CONNECTION X D MX 8 NPT EXPILOT PORT FOR 4 3 & 4 ONLY F C H J D E 5 6 (24 mm) H 3 8 (35 mm) J MNUL K/K* 3 K/K* OVERRIDE E (OPTIONL) C/C* C/C* (0 mm) D SIC VLVE DIMENSIONS C C* D D E F H J X NPT in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /4-3/ / *Dimensions for Spring-Centering Valves. NOTE: dapter is supplied when specifi ed by adding suffi x -H2 to product number. FOUR-WY F E H Mounting Holes (3) EXH C C D IN C SINGLE SOLENOID EXH ODY DETIL SIC VLVE DIMENSIONS C D E F HØ NPT in mm in mm in mm in mm in mm in mm in mm /4-3/ / DOULE SOLENOID 8 DPTER (OPTIONL - SEE NOTE ELOW) 8 DPTER (OPTIONL - SEE NOTE ELOW) 9 6 (5 mm) DMX 9 6 (5 mm) D MX EXPILOT PORT EXPILOT PORT NPT CONDUIT CONNECTION 2 X 2 NPT CONDUIT CONNECTION X F K C H J D E 5 6 (24 mm) SIC VLVE DIMENSIONS C C* D D E F H J X NPT in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /4-3/ / *Dimensions for Spring-Centering Valves. NOTE: dapter is supplied when specifi ed by adding suffi x -H2 to product number. Dimensions shown are for basic valve as listed on previous page. Some options may change the dimensions, for which consult factory (0 mm) K/K* C/C* K/K* C/C* 3 (0 mm) H J D E 5 6 (24 mm)

21 LOCKOUT VLVES RSS OR STINLESS STEEL 3-Way NC Solenoid Operated/Spring Return Lockout Valves General Description CONSTRUCTION Versa 3-way normally closed Lockout Valves function the same as a solenoid operated-spring return valve, except that a means is provided to allow the valve to be physically locked with a padlock or hasp with padlock in order to prevent accidental actuation. Two types of lockout are available: one provides the ability for locking the valve in the de-energized position whereby the inlet is blocked and the exhaust is open; the other type provides the ability for locking in either the de-energized or energized position. Media: Pressure: (minimum depends on valve size) Construction Materials: Series V Pneumatic Service 40 or 50 to 75 psi (2.8 or bar) Forged & machined brass; NR (nitrile) O ring seals Pneumatic Service 40 to 75 psi (2.8-2 bar) Series V36 Investment cast & machined 36 stainless steel; FKM (fl uorocarbon) seals Functional Type: ody Style: Port Sizes & Flow: ctuation: 3-way normally closed odyported /8 NPT or G/8 (C V =.4, K V =20.3) /4 NPT or G/4 (C V =.8, K V =26.) 3/8 NPT or G3/8 (C V = 3.4, K V =49.3) /2 NPT or G/2 (C V = 4.0, K V =58.0) 3/4 NPT (C V = 9.7, K V =40.6) NPT (C V =., K V =6.0) Solenoid/pilot-spring return for either Ordinary Service or Hazardous Service Lockout Valves Product Number Selector 3-way normally closed odyported /4 NPT (C V =.8, K V = 26) 3/8 NPT (C V = 2.0, K V = 29) /2 NPT (C V = 5.5, K V = 80) Solenoid/pilot-spring return for either Ordinary Service or Hazardous Service. Series V Series V36 FUNCTION PORT SIZE CV FLOW (kv) LOCKOUT IN EXHUST POSITION LOCKOUT IN EITHER POSITION LOCKOUT IN EXHUST POSITION LOCKOUT IN EITHER POSITION OPERTING PRESSURE 3-Way NC /8 NPT**.4 (20.3) VI-2-38-LOV-* VI-2-38-LOVE-* /4 NPT** /4 NPT 3/8 NPT** 3/8 NPT /2 NPT** /2 NPT (26.) (26) (49.3) (29) (58) (80) VI-3-38-LOV-* VI LOV-* VI LOV-* VI-3-38-LOVE-* VI LOVE-* VI LOVE-* 2 VI LOV-* VI LOV-* VI LOV-* VI LOVE-* VI LOVE-* VI LOVE-* psi (2.8-2 bar) 3/4 NPT 9.7 (40.6) VI LOV-* VI LOVE-* psi NPT. (6) VI LOV-* VI LOVE-* (3.5-2 bar) * dd coil code to valve number (ordinary page 27; hazardous page 29). ** Valves with ISO 228 G threads are designated by utilizing Suffix -2 in model number Options Installation, Filtration and Lubrication Options available for Series V Lockout Valve are the same as listed on page 3. Options available for Series V36 Lockout Valve are the same as listed on page 9. Valves have no limitations on mounting orientation. 40 to 50 micron filtration and general purpose lubricating oil ISO, STM viscosity grade recommended. mbient temperature range -0 F (-23 C) to 200 F (95 C).

22 L L L L L L LTCHING/MNUL RESET VLVES RSS OR STINLESS STEEL CONSTRUCTION General Description Latching valves are particularly suited to applications where it is desirable or mandatory to manually reset or restart a system. typical application could involve the emergency shutdown of automatically monitored process operations. Loss or interruption of the control signal to the valve actuator causes the valve to shift, latch and shut-down a process step. When the signal is restored the valve remains in the latched position until the operator manually unlatches it and allows the process step to resume. Positive latching in such an application is vitally important since many process operations are sequential and one step must not be started until the one ahead of it has started. This example is only one of many which can be accommodated through the use of Versa s Latching Valves. wide range of functional types, port sizes, actuators, and latching arrangements provide the engineer with a complete choice of valving to suit his particular needs. Types vailable Series V Series V36 Media Pneumatic; others, consult factory. Pneumatic and various other gases, including corrosives. Pressure: (minimum depends on size and type) Construction Materials Functional Type 20 or 55 to 75 psi (.4 or 3.8 to 2 bar) Forged & machined brass; NR (nitrile) O ring seals 3-way normally closed 3-way normally open 3-way 3-position 4-way 2 & 3 position 20 or 55 to 75 psi (.4 or 3.8 to 2 bar) Investment cast & machined 36 stainless steel; FKM (fl uorocarbon) seals 3-way normally closed 3-way normally open 3-way 3-position 4-way 2 & 3 position ody Style odyported odyported Port Sizes & Flow /8 NPT or G/8 (Cv =.4, Kv = 20.3) /4 NPT or G/4 (Cv =.8, Kv = 26.) 3/8 NPT or G3/8 (Cv = 3.4, Kv = 49.3) /2 NPT or G/2 (Cv = 4.0, Kv = 58.0) 3/4 NPT (Cv = 9.7, Kv = 40.6) NPT (Cv =., Kv = 6.0) /4 NPT (Cv =.8, Kv = 26) 3/8 NPT (Cv = 2.0, Kv = 29) /2 NPT (Cv = 5.5, Kv = 80) ctuation Solenoid/pilot for either ordinary service or hazardous service. Solenoid/pilot for either ordinary service or hazardous service. LTCHES IN CTUTED POSITION Suffi x -8 Latches automatically when plunger shifts on signal. Unlatching allows plunger to be returned by hand. Latching/Reset Devices For Series V or V36 Valves The Latching Device actuator consists of the latch, with or without an integral spring for returning the valve plunger, and an inline hand operator where needed to manually shift the valve. The specific Latching Device may be attached to any Series V valve body size or style up to NPT or any Series V36 valve body up to /2 NPT, as indicated for the type of latching/reset device required. The actuator on the opposite end of the valve body would be a solenoid/pilot device. Suffi x -8C TO RESET L P U Latches automatically when plunger shifts on signal. Unlatching allows spring to reset plunger automatically. Hand lever provided for manual operation. (If hand lever is not required see suffi x below.) LTCHES IN UN-CTUTED POSITION Suffi x -8D Unlatching allows plunger to shift on signal. If signal is lost, spring shifts plunger automatically and valve latches. When signal is restored, plunger will not shift until manually unlatched. Hand lever is provided for manual operation. (If hand lever is not required see suffi x below.) LTCHES IN EITHER POSITION Suffix -8 (2 position latch) Valve may be manually latched in either offset position or left unlatched. cts as spring return valve when not latched. Hand lever is provided for hand operation. TO RESET L P U TO RESET L P U TO RESET L P U Suffi x Latches automatically when plunger shifts on signal. Unlatching allows spring to reset plunger automatically. (If hand lever is required for manual actuation see suffi x -8C above.) Suffi x Unlatching allows plunger to shift on signal. Spring returns plunger automatically and valve latches. (If hand lever is required for manual actuation see suffix -8D above.) TO RESET L P U TO RESET L P U 22

23 V = Pneumatic service: nominal 20 to 75 psi (.4-2 bar); pressure range may vary depending upon specifi c valve type. See page 2 for Series V, page 8 for Series V36. G=Solenoid/pilot operated for 3-way NC or 4-way G=Solenoid/pilot operated for 3-way NO 3 = Three-way 4 = Four-way 2 = /8 NPT (Series V*) 3 = /4 NPT (Series V* or V36) 4 = 3/8 NPT (Series V* or V36) 5 = /2 NPT (Series V* or V36) 6 = 3/4 NPT (Series V) 7 = NPT (Series V) How to specify LTCHING/RESET VLVES V G (OPTIONS) 2 = Threaded sideports-inpilot solenoid: no auxiliary pilot required. = 3-way NC 2 = 3-way NO, 4-way/2-position 3 = 4-way/3-position (blocked center) 4 = 4-way/3-position (exhaust ports open in center) LOCKING/RESET DEVICE Series V Series V36 (refer to page 22 for specifi c device required) C 36-8C 8D 36-8D OPTIONS (Refer to pages 26 to 3 for specifi c certifi cations, standards & classifi cations, approvals, and protective codes.) Series V Series V36 Electrical Connection/ -HC -HC Coil Cover -HCC -HCC Seals Solenoids for Hazardous Service -XX -XX -XN -XN -J-PS-XN -J-PS-XN -XDS, T -XDS, T Flameproof L,XX -L,-XN -L,XN -XM, E, F, G -XM, E, F, G Encapsulation -XMF, E, F, G -XMF, E, F, G -HC-XISC -HC-XISC -HCC-XISC -HCC-XISC -HC-XISX6 -HC-XISX6 Intrinsically safe -HCC-XISX6 -HCC-XISX6 -XIF, F -XIF, F PS Options for Special Conditions-HT -HT -HT -G,-M,-M5R -ME -TR50-ST -ST -E4 -L4 Voltage (coil code) See page 27 for ordinary location and page 29 for hazardous location. *Valves with ISO 228 G Threads are designated by utilizing suffi x -2 in model number. Installation, Filtration nd Lubrication Valves have no limitations on mounting orientation. 40 to 50 micron fi ltration and general purpose lubricating oil ISO, STM viscosity grade recommended. mbient temperature range -0 F (-23 C) to 200 F (95 C). 23

24 REDUNDNT VLVES RSS OR STINLESS STEEL General Description CONSTRUCTION When parallel electronic control circuits are utilized in a system, if a complete control circuit fails or requires maintenance, the parallel circuit will keep the system running. In a parallel circuit Versa s Redundant Valve functions the same as a solenoid operated-spring return valve, except that it has two solenoids (one for each of the parallel circuits) rather than one solenoid. Either or both of these solenoids will shift and maintain the controlled device in the shifted position. oth solenoids must be de-energized to return the controlled device to the un-shifted position. The use of one Redundant Valve can replace multiple valves and components to accomplish the same function. FLOW SCHEMTIC EX EX IN Types vailable SERIES V SERIES 36 Media: Pneumatic Service Pneumatic Service Pressure: Construction Material: Functional Types: Port Sizes & Flow: ctuation: 50 to 75 psi (3.5 to 2 bar) Forged & machined brass; NR (nitrile) O ring seals 3-way, normally closed 4-way, 2 position /8 NPT or G/8 (Cv=.4,Kv=20.3) /4 NPT or G/4 (Cv=.8,Kv=26.) 3/8 NPT or G3/8 (Cv=3.4,Kv=49.3) /2 NPT or G/2 (Cv=4.0,Kv=58.0) Solenoid/pilot-spring return (2 solenoids per valve), for either ordinary or hazardous service. 40 to 75 psi (2.8 to 2 bar) Investment cast & machined 36 stainless steel, FKM (fl uorocarbon) seals 3-way, normally closed 4-way, 2 position /4 NPT (Cv=.8,Kv=26 3/8 NPT (Cv=2.0,Kv=29) /2 NPT (Cv=5.5,Kv=80) Solenoid/pilot-spring return (2 solenoids per valve), for either ordinary or hazardous service. MPa = bar 0 Redundant Valves Product Number Selector FUNCTION SIZE SERIES V SERIES 36 3-Way, 3/2 Normally Closed /8 NPT** /4 NPT** 3/8 NPT** /2 NPT** VS-2-RS-* VS-3-RS-* VS-342-RS-* VS-352-RS-* VS-3-36-RS-* VS RS-* VS RS-* 4-Way, 5/2 /8 NPT** /4 NPT** 3/8 NPT** /2 NPT** VS-4222-RS-* VS-42-RS-* VS-4422-RS-* VS-4522-RS-* VS RS-* VS RS-* VS RS-* *dd coil code to valve number (ordinary page 27; hazardous page 29). ** V Series valves with ISO G threads are designated by utilizing Suffi x -2 in model number. Options Options available for Series V Redundant Valves are the same as listed on page 3, except not all solenoid options are available. Consult factory. Options available for Series V36 Redundant Valves are the same as listed on page 9, except not all solenoid options are available. Consult factory. 24 Installation, Filtration and Lubrication Valves have no limitations on mounting orientation. 40 to 50 micron fi ltration and general purpose lubricating oil ISO, STM viscosity grade recommended. mbient temperature range -0 F (-23 C) to 200 F (95 C).

25 CCESSORIES (For a complete selection of available accessory items request ulletin CC) leed Control Valves MTERILS rass or 36 Stainless Steel (conforms to NCE MR-0-75) PRESSURES psi (0-4 bar) air precision machined, adjustable and lockable needle provides an economical, effective fl ow control in pneumatic applications. The leed Control Valve can be threaded into the exhaust port of a directional control valve and thus affect the speed of the actuating device by controlling the amount of exhaust air to atmosphere. PRODUCT NUMER rass Stainless Steel C-2 /8 NPT C-3 /4 NPT C-3-36 C-4 3/8 NPT C-4-36 C-5 /2 NPT C-5-36 C-6 3/4 NPT C-6-36 C-7 NPT C-7-36 Dust Excluders Dust Excluders may be threaded into exhaust ports in order to keep dirt or dust surrounding the valve, from entering through an otherwise open port. Preferably mounted in a vertical position with the wide outlet opening down. PRODUCT NUMER luminum Stainless Steel DE-2 /8 NPT DE-3 /4 NPT DE-3-36 DE-4 3/8 NPT DE-4-36 DE-5 /2 NPT DE-5-36 MTERILS DE-6 3/4 NPT DE-6-36 luminum ody with NR (Nitrile) seal or 36 Stainless Steel body DE-7 NPT DE-7-36 (conforms to NCE standard MR-0-75) with CR (Neoprene) seal PRESSURES psi (0-4 bar) air Quick Exhaust Valves (See page 5 for Electrically ctuated Quick Exhaust Valves) Quick Exhaust Valve is a three-way, 3/2 valve with extra large exhaust orifi ce, to be fi tted directly at a cylinder port or actuator connection. When pressure decreases at the inlet of the Quick Exhaust Valve, the outlet is automatically opened to the exhaust and the cylinder or actuator is quickly depressurized IN EXH QE-3-36 QE-5-36 QE-6-36 CYL or CT SIZE PRODUCT MTERILS FLOW Cv (Kv) PRESSURES NUMER Inlet & cyl Exh ody Seals Screws & Misc Inlet Exhaust /4 NPT 3/8 NPT QE psi ( bar) Electroless nickel plated brass 3.0 (43.5) 3.3 (48) FKM (fl uorocarbon) O rings /4 NPT 3/8 NPT QE psi ( bar) Investment cast stainless steel 36 stainless steel CR (neoprene) coated nylon fl apper /2 NPT 3/4 NPT QE psi ( bar) (conforms to NCE MR-0-75) 3.8 (55) 8.8 (28) 3/4 NPT NPT QE psi ( - 2 bar) 36L stainless steel FKM (fl uorocarbon) O rings CR (neoprene) single lip seal 36 & 8-8 stainless steel 4.6 (66) 3.6 (95) Stainless Steel Regulators (For more complete information including product numbers and dimensions request ulletin R-36) Series R-36 Stainless Steel Regulators and Filter Regulators are specifi cally designed for use in the harshest of environments, PORT SIZE Inlet/Outlet: /4 NPT or /2 NPT including offshore and sour gas. Proven 36 stainless Gauge: (2) /4 NPT Vent: /8 NPT steel housings coupled with a fl uorocarbon diaphragm provides extremely stable and repeatable gas pressure control with high CONTROLLED MEDIUM: Pneumatic only fl ow rates and minimal pressure drop. tapped vent port allows PRESSURES: for remote venting of hazardous gases. Supply maximum: 290 psig (20 bar) The stainless steel materials from which the R-36 Series Regulators are constructed meet NCE MR-0-75 sulfi de stress cracking requirements. Output range: 0-30 psig (0-2.0 bar) 0-60 psig (0-4.0 bar) 0-00 psig (0-7.0 bar) 0-50 psig (0-0.0 bar) MTERILS ody, bonnet, fi lter: Diaphragm, seals: Valve spring: 36 Stainless Steel FKM (fluorocarbon) Inconel EXHUST CPCITY:.0 SCFM (.7 m 3 /hr) at downstream pressure of 0 psig (0.7 bar)above setpoint. 25 TEMPERTURE: 5 F to 80 F (-5 C to 82 C) std -55 F to 200 F (-48 C to 93 C) F to 300 F (-29 C to 49 C) -EP

26 OPTIONS - specifications, technical information, series availability ELECTRICL: Solenoid/Pilot actuated valves are available with a variety of different solenoids for both nonhazardous and hazardous locations. asic details of actuators for nonhazardous locations are listed below. Details for hazardous location actuators are listed on pages 28/29. For additional data consult factory. Product numbers and other details may be found on the appropriate pages for each specifi c valve type and series. NONHZRDOUS LOCTION SOLENOIDS Solenoid Identification Detail Protection Classification rea Classification and (Gas Grouping) Certification (Conformance) Ingress Protection Standard (Series E5, E, V & V36) General Purpose Indoor & Outdoor CS-#LR45276 NEM,2,3 Standard (NMUR Series C5, General Purpose Indoor & Outdoor CS-#LR45276 NEM,2,3 NMUR Series E5, Series C5 & C7) Standard (NMUR Series 36, General Purpose Indoor & Outdoor CS-#LR45276 NEM,2,3 & Series C36) 26

27 PRODUCT NUMER COIL CODES: Complete product numbers require, when applicable, a coil code that represents the desired coil current, frequency and voltage. The coil code takes the form shown below, with ratings and voltage substituted as required * ### Rating Code = 60Hz frequency D= Direct Current (DC) E= 50 Hz frequency Voltage (Power) Voltage (indicated by three digits; as example, 24 volts = 024, 20 volts = 20). Electrical Characteristics Miscellaneous (For options other than those listed below see page 30/3.) ll usual 50 Hz & 60 Hz C (Series V=8.7W; Series E=8.7W; Series V36 & E5=6W). ll usual DC (Series V=9.5W; Series E=9.5W; Series V36 & E5=7W). Class F epoxy molded coil (55 C) with 2 leads 24 (6 cm). Continuous duty. Steel Chromate plated cover with /2 NPT conduit entry. For watertight (NEM 4 & 4X) potted coil & Chromate plated steel cover with /2 NPT conduit entry option: () For Mini DIN connector with PG9 cord grip, NEM 4, IP65 per IEC 529 option: (-HC) For Mini DIN connector with /2 NPT conduit entry, NEM 4, IP65 per IEC 529 option: (-HCC) 24V60, 20V60, 240V60 (8.5W, except 6W with NMUR Series E5) 24V50, 0V50, 220V50, 240V50 (8.5W, except 6W with NMUR Series E5) 2VDC, 24VDC, 48VDC (0.5W, except 7W with NMUR Series E5) Class F epoxy molded coil (55 C) with 3 spade terminals. Continuous duty. For Mini DIN connector with PG9 cord grip, NEM 4, IP65 per IEC 529 option: (-HC) For Mini DIN connector with /2 NPT conduit entry, NEM 4, IP65 per IEC 529 option: (-HCC) For integrally epoxy molded coil and /2 NPT conduit connection with 2 wire leads 24 (6cm), NEM 4 option: (-228L) For steel Chromate plated coil cover with 2 wire leads 24 (6 cm) option: (-C50). For watertight (NEM 4 & 4X) potted coil & Chromate plated steel cover with /2 NPT conduit entry option: () 2VDC, 24VDC, 48 VDC (7W; with Mini DIN 0.5W) 0V50, 220V50 (6W; with Mini DIN 6.5W) 20V60, 240V60 (6W; with Mini DIN 6.5W) Class F epoxy molded coil (55 C) with 2 leads 24 (6 cm). Continuous duty. Painted carbon steel cover with /2 NPT conduit entry. For watertight (NEM 4 & 4X potted coil & Chromate plated steel cover option: (). For Mini DIN connector (NEM 4) with PG9 cord grip option: (-HC) For Mini DIN connector (NEM 4) with /2 NPT conduit entry option: (-HCC). 27

28 OPTIONS - specifications, technical information, series availability ELECTRICL: Solenoid/Pilot actuated valves are available with a variety of different solenoids for both nonhazardous and hazardous locations. asic details of actuators for hazardous locations are listed below. Details for nonhazardous location actuators are listed on pages 26/27. For additional data consult factory. Product numbers and other details may be found on the appropriate pages for each specifi c valve type and series HZRDOUS LOCTION SOLENOIDS Solenoid Identification Detail Protection Classification rea Classification and (Gas Grouping) Certification (Conformance) Ingress Protection -XX -L-XX Hazardous Locations Class I Groups C & D, Class I, Division 2, Groups,, C & D; Class II, Divison 2, Groups E, F & G; T3C; UL - CS NEM 7 & (series V) -XN II 2 G Ex d II+H 2 T6...T3 TEX IP65/67/68 -L-XN (d) Flameproof Ex d II+H 2 T6 to T3 Gb IECEx -XDS or XDT II 2 G Ex d IIC, T4...T6 Ex d IIC T4 to T6 Gb TEX IECEx -XM -XME -XMF -XMG -XMF -XMFE (mb) Encapsulation (e) Increased Safety (td) Dust II 2 G Ex e mb II T5, T6 II 2 D Ex td 2 T00ºC, T85ºC Ex e mb II T5, T6 Gb Ex td 2 T00ºC, T85ºC Db TEX IECEx IP66 & IP67 -XMFF -XMFG -XISC Intrinsic Safe Class I, Groups (,, C & D) Class II, Groups (E, F, &G) Class III Factory Mutual - CS IP65 -XISX6 II 2 G EEx ia IIC T6 TEX (ia) Intrinsic Safe -XIF -XIFE -XIFF II 2 G Ex ia IIC T4...T6 Gb II 2 D Ex iad 2 T30 C...T80 C Ex ia IIC T4...T6 Gb Ex ia IIIC T30 C...T80 C Db TEX IECEx IP66 & IP67 28

29 PRODUCT NUMER COIL CODES: Complete product numbers require, when applicable, a coil code that represents the desired coil current, frequency and voltage. The coil code takes the form shown below, with ratings and voltage substituted as required * ### Rating Code = 60Hz frequency D= Direct Current (DC) E= 50 Hz frequency Voltage (indicated by three digits; as example, 24 volts = 024, 20 volts = 20). Voltage (Power) ll usual 50 Hz & 60 Hz C (5.6W, except Series E=7.3W and Series V=7.3W.) ll usual DC (7.2W, except Series E=9.5W and Series V = 9.5W.) 2V60, 24V60, 48V60, 20V60, 240V60 (.8W) 6VDC, 2VDC, 24VDC, 48VDC (.8W) 24V50, 0V50, 230V50, 240V50 (5.6W) 24V60, 20V60, 240V60, 480V60 (5.6W) 6VDC, 2VDC, 24VDC, 48VDC, 25VDC (7.2W) 2V60, 24V60, 48V60, 20V60, 240V60 (.8W) 6VDC, 2VDC, 24VDC, 48VDC (.8W) 24V50, 230V50 (6W); 27V50 (0W) 24V60, 20V60, 240V60 (0W) 2VDC, 24VDC, 28VDC, 48VDC, 0VDC, 25VDC (0W) 24VDC (4W) (Consult factory for other voltage options) 24VDC(0W inrush, 2.6W holding) (Consult factory for other voltages) Electrical Characteristics Class F epoxy molded coil (55ºC) Continuous duty. 3 leads 24 (6 cm) For potted coil add: -PS (Series V or Series E); (NMUR C5 or NMUR E5, Series C5/C7, C36, V36 or E5). Class F epoxy molded coil (55ºC) Continuous duty. 3 leads 24 (60 cm). Class F epoxy molded coil (55ºC) Continuous duty 3 leads 24 (6 cm). For potted coil add: -PS (Series V or Series E); (NMUR C5 or NMUR E5, Series C5/C7, C36, V36 or E5). Class F epoxy molded coil (55ºC) Continuous duty. 3 leads 24 (6 cm). Class F epoxy molded coil (55ºC) Continuous duty. Continuous duty. Coil & Rectifier, including surge suppression, potted within housing. Continuous duty. Coil & power controller potted within housing. Miscellaneous Steel Chromate plated coil housing with /2 NPT conduit entry. For (82FM) stainless steel cover add: -ST (NMUR C5 or NMUR E5, Series C5/C7, E5, C36 or V36; -TR50-ST (Series V). Steel Chromate plated coil housing with /2 NPT conduit entry. For stainless steel (82 FM) coil housing add: -ST Maximum pilot pressure 20 psi (8 bar)..8w nominal power. Steel Chromate plated coil housing with M20 x.5 conduit entry. Ground terminal on cover. For stainless steel (82 FM) cover add: -ST (NMUR C5 or NMUR E5, Series C5/C7, E5, V, C36 or V36). For flameproof luminum Epoxy Coated Junction ox (-J-PS) Steel Chromate plated coil housing with M20 x.5 conduit entry. Ground terminal on cover. For stainless steel (82 FM) cover add: -ST. Maximum pilot pressure 20 psi (8 bar)..8w nominal power. Stainless Steel coil housing with internal Junction ox. Internal and external ground screw. M20 x.5 conduit entry: (-XDS) /2 NPT conduit entry: (-XDT). Thick wall epoxy coil housing with integral junction box. Internal ground terminal. M20 x.5 conduit entry: (-XM) Cable gland for 6-2 mm ø cable: (-XME) /2 NPT conduit entry with adapter: (-XMF) Cable gland for 9-6 mm ø cable: (-XMG) Thick wall epoxy coil housing with integral junction box. Internal ground terminal. M20 x.5 conduit entry: (-XMF) Cable gland for 6-2 mm ø cable: (-XMFE) /2 NPT conduit entry with adapter: (-XMFF) Cable gland for 9-6 mm ø cable: (-XMFG) 24VDC system voltage prior to barrier (.6 watt max.) Class F epoxy molded coil (55ºC) with 3 spade terminals and mini DIN connector with PG cable gland. Continuous duty. Requires the use of an approved safety barrier or isolator. Maximum operating system voltage before barrier 28VDC. Maximum pilot pressure 5 psi (8 bar) 3 spade terminals & DIN connector with PG9 cable gland: (-HC) /2 NPT conduit entry: (-HCC) 24VDC (0.8W) (Consult factory for other voltages) Continuous duty. Coil and power controller potted, within housing. Requires the use of an approved safety barrier or isolator. Thick wall epoxy coil housing and integral M20 x.5 conduit entry: (-XIF) Cable gland for 6-2 mm ø cable: (-XIFE) /2 NPT conduit entry with adapter: (-XIFF) 29

30 OPTIONS VILILITY CHRT Solenoid Options - Nonhazardous Location NMUR C5 NMUR E5 NMUR C36 VLVE SERIES C5/C7. E E5 V C36 V36 /2 NPT Conduit entry, NEM,2,3 -C50 -C50 std -C50 std std std std std /2 NPT Conduit entry, Potted coil NEM 4 & 4X,, 2, 3. /2 NPT Conduit Integrally Molded Coil & Conduit Entry, NEM 4/IP L -228L -228L 3 Spade Terminals, for use with mini DIN connector std std std Mini DIN Connector with PG9 cord grip, NEM 4. Mini DIN Connector with /2 NPT conduit entry, NEM 4. -HC -HC -HC -HC -HC -HC -HC -HC -HC -HCC -HCC -HCC -HCC -HCC -HCC -HCC -HCC -HCC Solenoid Options - hazardous Location VLVE SERIES NMUR C5 NMUR E5 NMUR 36 C5/C7 E E5 V C36 V36 /2 NPT Conduit entry, NEM 7 & 9, UL & CS. (d) Flameproof, TEX/IECEx II 2 G Ex d II + H 2 T6...T3 Ex d II + H 2 T6 to T3Gb IP65/67/68, M20 x.5 Conduit entry, -XX -XX -XX -XX -XX -XX -XX -XX -XX -XN -XN -XN -XN -XN -XN -XN -XN Stainless steel (82 FM) coil cover for -XX Hazardous Location Options: -XN -ST -ST -ST -ST -ST -ST --ST -ST -ST -ST -TR50-ST -ST -ST -ST --ST -ST Potted Coil (female threaded conduit -XX connection) for Hazardous Location options, NEM 4X,, 2, 3: -XN -TR50 Potted Coil (male threaded conduit connection) for-xx Hazardous Location options, NEM 4X,, 2, 3. -PS -PS LOW WTT (.8W) Solenoid: For -XX Hazardous Location option; NEM 7 & 9, UL & CS. L-XX -L-XX -L-XX -L-XX -L-XX L-XX -L-XX For -XN Hazardous Location option; see -XN above -L-XN -L-XN -L-XN -L-XN -L-XN -L-XN -L-XN -L-XN Flameproof Junction ox EExd IIC Certification, TEX. -J-PS-XN J-PS-XN J-PS-XN J-PS-XN J-PS-XN J-PS-XN J-PS-XN J-PS-XN 30

31 Solenoid Options - Hazardous Location Cont. VLVES SERIES (d) Flameproof TEX/IECEx Ex d II 2 G Ex d IIC T4...T6 Ex d IIC T4 to T6 Gb NMUR C5 NMUR E5 NMUR C36 -XDS -XDT C5/C7 E E5 V C36 V36 -XDS -XDT -XDS -XDT -XDS -XDT -XDS -XDT (mb) Encapsulation (e) Increased Safety (td) Dust TEX/IECEx II 2 G Ex e mb II T5, T6 II 2 D Ex td 2 T00ºC, 85ºC Ex e mb II T5, T6 Gb Ex td 2 T00ºC, 85ºC Db -XM -XMF -- -XMF -- -XMFF -- -XM -XME -XMF -XMG -XMF -XMFE -XMFF -XMFG -XME -XMF -XMG -XMF -XMFE -XMFF -XMFG -XM -- -XMF -- -XMF -XMFF -- -XM -XME -XMF -XMG -XMF -XMFE -XMFF -XMFG (ia) Intrinsic Safe TEX/IECEx II 2 G Ex ia IIC T4...T6 Gb II 2 D Ex iad 2 T30...T80ºC Ex ia IIC T4...T6 Gb Ex ia IIIC T30...T80ºC Db -XIF -- -XIFF -XIF -XIFE -XIFF -XIF -XIFE -XIFF -XIF -- -XIFF -XIF -XIFE -XIFF Factory Mutual & CS Class I, Groups (,, C, D) Class II, Groups (E, F & G) Class III, Division -HC-XISC -HCC-XISC -HC-XISC -HCC-XISC -HC-XISC -HCC-XISC -HC-XISC -HCC-XISC -HC-XISC -HCC-XISC -HC-XISC -HCC-XISC -HC-XISC -HCC-XISC (ia) Intrinsic Safe TEX II 2 G EEx ia IIC T6 -HC-XISX6 -HC-XISX6 -HCC-XISX6 -HCC-XISX6 -HC-XISX6 -HCC-XISX6 -HC-XISX6 -HCC-XISX6 -HC-XISX6 -HCC-XISX6 -HC-XISX6 -HCC-XISX6 Miscellaneous Options Manual Override (Manually pressurizes pilot of solenoid/ pilot actuator) NMUR C5 NMUR E5 NMUR C36 VLVE SERIES C5/C7 E E5 V C36 V36 Seals Unguarded type; push & hold to operate. Unguarded locking type; push to operate and turn to lock. Guarded type; push & hold to operate (non-locking). High nitrile compound suitable for sweet natural gas, ammonia, R, 2 or 3 freon. FKM (fluorocarbon) compound (included as standard on all hazardous location solenoids) ME -- -ME -- -M -ME -ME -- -CML CML -M5R -- -M5R -- std std -M -- -G std -3 std std std std- High Temperature Coil Class H Coil*; recommended for applications above 50 F (65 C) and for DC continuous Coil duty above 20 F (50 C) For nonhazardous or hazardous location. -C50-HT -C50-HT -C50-HT -C50-HT -HT -HT -HT -HT -HT Special Condition Silencer/Dust Excluder Solenoid Exhaust * Not available with spade terminals or DIN style connectors or suffix -228L -L4 -L4 -L4 -L4 -E4 -L4 -E4 -L4 -L4 3

32 The warnings below must be read and reviewed before designing a system utilizing, installing, servicing, or removing a Versa product. Improper use, installation or servicing of a Versa product could create a hazard to personnel and property. DESIGN PPLICTION WRNINGS Versa products are intended for use where compressed air or industrial hydraulic fl uids are present. For use with media other than specifi ed or for non-industrial applications or other applications not within published specifi cations, consult Versa. Versa products are not inherently dangerous. They are only a component of a larger system. The system in which a Versa product is used must include adequate safeguards to prevent injury or damage in the event of system or product failure, whether this failure be of switches, regulators, cylinders, valves or any other system component. System designers must provide adequate warnings for each system in which a Versa product is utilized. These warnings, including those set forth herein, should be provided by the designer to those who will come in contact with the system. Where questions exist regarding the applicability of a Versa product to a given use, inquiries should be addressed directly to the manufacturer. Confi rmation should be obtained directly from the manufacturer regarding any questioned application prior to proceeding. INSTLLTION, OPERTION ND SERVICE WRNINGS Do not install or service any Versa product on a system or machine without fi rst depressurizing the system and turning off any air, fluid, or electricity to the system or machine. ll applicable WRNINGS REGRDING THE DESIGN PPLICTION, INSTLLTION ND SERVICE OF VERS PRODUCTS electrical, mechanical, and safety codes, as well as applicable governmental regulations and laws must be complied with when installing or servicing a Versa product. Versa products should only be installed or serviced by qualifi ed, knowledgeable personnel who understand how these specific products are to be installed and operated. The individual must be familiar with the particular specifi cations, including specifi cations for temperature, pressure, lubrication, environment and filtration for the Versa product which is being installed or serviced. Specifications may be obtained upon request directly from Versa. If damages should occur to a Versa product, do not operate the system containing the Versa product. Consult Versa for technical information. LIMITED WRRNTY DISCLIMER ND LIMITTION OF REMEDIES Products sold by Versa are warranted to be free from defective material and workmanship for a period of ten years from the date of manufacture, provided said items are used in accordance with Versa specifi cations. Versa s liability pursuant to that warranty is limited to the replacement of the Versa product proved to be defective provided the allegedly defective product is returned to Versa or its authorized distributor. Versa provides no other warranties, expressed or implied, except as stated above. There are no implied warranties of merchantability or fi tness for a particular purpose. Versa s liability for breach of warranty as herein stated is the only and exclusive remedy and in no event shall Versa be responsible or liable for incidental or consequential damages. sales@versa-valves.com