Bulletin: VT 2017 V & T SERIES

Transcription

1 ulletin: VT 207 V & T SRIS Versa Product ompany, Inc., 22 Spring Valley Road, Paramus, N US Phone: (20) ax: (20) Versa V, Prins Willem lexanderlaan 427, 732 peldoorn, The Netherlands Phone: ax: mail: sales@versa-valves.com

2 0207 QUI X VVS/TUTORS Section Page Two-Way Valves... general V 2-WY 8... dimensions V 2-WY subplates & manifolds V 2-WY 24 Three-Way Valves... general V 3-WY dimensions V 3-WY subplates & manifolds V 3-WY 32 our-way Valves... general V 4-WY dimensions V 4-WY subplates & manifolds V 4-WY 40 ive-way Valves... general V 5-WY 42 (ual Pressure... dimensions V 5-WY 44 our-way)... subplates & manifolds V 5-WY 48 ctuating evices atching-anual Reset Valves ockout Valves Oil-ree Service Valves Redundant Solenoid Valves Stainless Steel Tag... 7 SPIITIONS asic eatures... 3 onstruction... 4 lectrical iltration... 4 low (v)... 5 ubrication... 4 Port Sizes... 5 Pressure Ranges... 6 Product Numbering System Seals... 4 Temperature... 7 Valve Sizing... 5 PRTS ctuator Subassemblies ody Subassemblies ombination ctuators Repair its... 7 WRNS & WRRNTY... ack over 2

3 SI TURS Versa exercises diligence to assure that information contained in this catalog is correct, but does not accept responsibility for any errors or omissions. Versa also reserves the right to change or delete data or products at any time without prior notification. To be sure the data you require is correct, consult factory. NR RTRISTIS O SRIS V & T VVS VRSTIITY: or practically all pneumatic, and for many low pressure hydraulic directional control applications there is a Versa Valve made for trouble-free performance under the most exacting conditions. Integrity of design makes Versa Valves adaptable to a maximum number of applications with a minimum of components. This is possible through the modular approach to valve construction, which allows valve bodies and actuating devices to be interchanged end for end and valve for valve in many cases. The next few pages illustrate the modular approach to valve design and how this makes possible the many thousands of viable valving variations with Versa s Series V & T valves. logical, significant product numbering system, derived from the modular method, enables the customer to build his own valve to fit his unique specifications. ONSTRUTION: STNR SIZ O RS, PPI ORN WIT VRS S NTI-XTRUSION PRIP RSS N STSS ST WTT PRTS OR RSS OPONNTS OR STRNT, NSITY N OPTNSS PROO TROUOUT NTIR PRSSUR RN I PRORN SONOI NR RITIONSS IRT T POPPT YIS POSITIV SIT, T OWST WTT RTS N UNSUR- PSS RIIITY. I Y RTS TO 20 IION YS. ISO 900 N SPOO ORS RQUIR TO TUT R UNT Y PRSSURS ONTRO UY PORT* TRN OW R QU TO OR RTR TN TRNSVRS R O ORRSPON PIP SIZ *XPT ¼ SIZ WI S OW R O ¼ (32mm) ITR ORII S RSIU VOU SS WST IR PR TUTION POXY O OISTUR-PROO OIS RTII VRY VV UNTIONY TST TROUOUT OPT PRSSUR RN OR SIPP OPTIIITY & PPITION RN: Series V valves are designed for the control of pneumatic pressures from partial vacuum to 200 psi (4 bar). owever, the use of standard O ring seals makes it possible to supply many different compounds in order to meet varying conditions of media and temperature. In general, the standard NR (Nitrile) O rings used in Series V valves allow application for most general industrial use. mbient temperatures below freezing require moisture free air and the use of suitable lubrication. Series T valves are designed for the control of hydraulic pressures 0 to 500 psi (35 bar). Their maximum media temperature is 30 (55 ). or water service, consult factory. imitations generally apply to specific types of actuation, such as solenoid or pilot. The minimum and maximum pressures in these cases are dependent upon valve size, method of return actuation, valve series, range of pressure being controlled. or specific information refer to specification pages 3 thru

4 Specifications aterials of construction: ody Internal Parts (wetted) orged rass rass [with electrical nickel plated (-0 )] or stainless steel Spring ap iecast aluminum (std), orged brass (optional) anual nobs Pedal or Treadle Subplates & anifolds asteners Seals ONSTRUTION Plastic luminum casting luminum (std) rass (optional) Steel (std), Stainless Steel (optional) NR (Nitrile) (std), (fluorocarbon) -55 PR (ethylene propylene) -P T (tetrafluoroethylene) or hydraulic applications over 00 psi ITRTION & URITION VRS Series V & T valves are lubricated during assembly to insure that the valve will operate to specifications. n R with microns filter is recommended. Where continued lubrication is not possible, consult factory. isted below is a are of commercially available light (turbine type) oils which are recommended for Series V valves. They are compatible with the seals normally used. irline ubricator Oils anufacturer ubricant hevron Oil o. ST Oil 32 ITO Pacemaker T-32 xxon Teresstic 32 ulf Oil orp armony 32 obil Oil orp. T ight Shell Oil o Turbo 32 Sun Oil o Sunvis 932 Texaco Inc Regal Oil R & O

5 Specifications PORT SIZS (Valve or Sub-plate) VV SIZ PORT N /8 /4 3/8 /2 3/4 -/4 (sideported) -/4 (subplate mounting) Inlet, ylinder, Outlet, xhaust /8 NPT or /4 NPT or 3/8 NPT or /2 NPT or 3/4 NPT NPT NPT -/4 NPT Pilot (Remote or leed Type) or XPilot (Solenoid XPilot Type) /8 NPT Pilot (iaphragm ctuated Type) or Threaded Solenoid xhaust dapter (-) /4 NPT Solenoid xhaust 5/6-8 OW The amount of flow through a valve is dependent upon the differential pressure (ΔP) between ports of the valve. Temperature, specific gravity, and viscosity are other variables that can affect flow. When dealing with gases, unless conditions are far from standard, temperature and specific gravity (S) will have little effect. low is often expressed in terms of v. The v factor (flow factor) is a mathematical term that defines the relationship between flow and pressure. The larger the v factor, the greater the flow capacity of the valve. If the v factor, for a particular valve or other component or system is known, it can be substituted into an equation that will give the flow when details about the pressure are known. In the case of gases, it is necessary to know both the outlet pressure and the pressure drop (or at least an approximation) in order to determine the flow. v factors may be used to compare one valve s flow capacity with another. owever, bear in mind that latitude exists for valve manufacturers to determine the v factor and therefore this kind of comparison may not be entirely valid. SS S = 22.5 V ΔP (Outlet psi abs) (460 + ) (S) IQUIS P = V ΔP psi (S) asic Valve Size low rea iameter Port Size* /4 3/8 (9.5mm) /2 5/8 (5.9mm) -/6 (26.99mm) v TORS OR SRIS V & T VVS verage v actor (all ports) OW** S N 3 / /8 NPT or /4 NPT or /8 NPT or /2 NPT or /4 NPT NPT /4 -/4 (3.75mm) NPT (side ported) * Subplates of the same port size will provide v factors 5-0% lower. Over-ported subplates can be supplied which will usually increase the v factor 5-0%. ittings with smaller I than the corresponding iron pipe will restrict flow. **ssumptions: low = air Inlet pressure = 00 psi (7 bar) ΔP = 40 psi (3 bar) Outlet abs = 74.7 psi (5 bar) Temp = 68 (20 ) S =.0 OW TO SIZ T VV TO T YR In selecting the right valve for a cylinder application, one needs to know three design conditions:. ylinder bore; 2. Stroke; 3. xtension Time. Using the valve selection chart below one can select the smallest valve that will meet the design conditions. The smaller valve generally costs less and requires less space. The valve sizes shown are Series V basic sizes; use plumbing of the same capacity for maximum cylinder speed. YR OR S (mm) Thru 2 (50.8) Thru 2-/2 (63.5) Thru 4 (0.6) Thru 5 (27.0) Thru 6 (52.4) Thru 8 (203.2) IU PISTON SP /S (/S) (25.4) 3 (76.2) 6 (52.4) 2 (304.8) 24 (609.6) 36 (94.4) 48 (29.2) ¼ asic Size ½ asic Size asic Size ¼ asic Size This table was derived from extensive valve-performance testing with a wide variety of cylinders. It is based on short line [air travels at approximately,000 feet (305 meters) per second], psi ( bar) at the valve, cycle rates of 60 cpm or less, small difference in effective area, equal inlet and exhaust v factors, and loads requiring less than 30 psi (2. bar) to initiate movement. In other cases, an experimental approach must be used. 5

6 PRSSUR RNS TYP O TUTION, P, TR or N PIOT Pressure Pilot leed Pilot SONOI - PIOT iaphragm Pilot XPilot TYP O RTURN Spring, Spring entering, etent, am, Treadle, Pedal, and Spring, Spring entering Pressure Pilot leed Pilot Spring, Spring entering iaphragm -3-3 Spring, Spring entering Solenoid Pilot Spring, Spring entering Solenoid Pilot Specifications SRIS V Pneumatic* OPRT PRSSUR RN TROU VV (ONTRO PRSSUR) IU PIOT PRSSUR (When pplicable) /8 - /2 3/4 - ( ¼**) /8 - /2 3/4 - ¼ V psi (V. - 4 bar) V psi (V.- 4 bar) V psi (V. - 4 bar) psi (2.8-4 bar) V psi (V. - 4 bar) V psi (V. - 4 bar) V psi (V. - 4 bar) V psi (V.- 4 bar) V psi (V. - 4 bar) psi (2.8-4 bar) V psi (V. - 4 bar) V psi (V. - 4 bar) V psi (V. - 4 bar) V psi (V. - 4 bar) 40 psi (2.8 bar) 50 psi (3.5 bar) 20 psi (.4 bar) 20 psi (.4 bar)i psi X (0.7-4 bar X) psi X (0.3-4 bar X) 5-50 psi X ( bar X) psi X (.4-4 bar X) 6-50 psi X ( bar X) psi X (.4-4 bar X) psi psi psi (2.8-2 bar) (2.8-2 bar) psi (.4-2 bar) (.4-2 bar) V psi V psi psi X psi X (V. - 4 bar) (V. - 4 bar) (2.8-2 bar X) (3.5-2 bar X) V psi V psi psi X psi X (V. - 4 bar) (V. - 4 bar) (.4-2 bar X) (.4-2 bar X) * The standard V Series product is rated for air and gas service including natural gas. While the standard valve is rated for natural gas, Versa recommends suffix detail NS for enhanced valve performance (-NST for low temperature applications). or other gases please consult factory for seal compatibility. ** or ¼ maximum operating pressure is limited to 50 psi (0 bar), pneumatic. ll standard solenoid valves with maximum operating pressure or pilot pressure listed at 75 psi (2 bar) may be plus pressure rated to a maximum of 200 psi (4 bar). Specified by adding suffix -200 to model number. inimum Pilot Pressures are based on normal airline lubrication. or more prolonged and efficient operating life, use an airline filter and lubricator device. Refer to Page 7 for recommendations. Where lubrication is not possible, consult the factory for required modifications. SRIS T (ydraulic) TYP O TUTION, P, TR or N TYP O RTURN Spring, Spring entering, etent, am, Treadle, Pedal, and OPRT PRSSUR RN TROU VV (ONTRO PRSSUR) IU PIOT PRSSUR (When pplicable) /8 - /2 3/4 - /8 - /2 3/ psi (0-35 bar) psi (0-35 bar) PIOT SONOI - PIOT Pressure Pilot leed Pilot iaphragm Pilot XPilot Spring, Spring entering Pressure Pilot leed Pilot Spring, Spring entering iaphragm -3-3 Spring, Spring entering Solenoid Pilot Spring, Spring entering Solenoid Pilot or water service consult factory Product ulletin psi (0-35 bar) psi (0-35 bar) psi ( bar) psi (0-35 bar) psi (0-35 bar) psi (3.8-2 bar) psi (8.6-3 bar) psi ( bar) psi (4.8-3 bar) psi (0-35 bar) psi (0-35 bar) psi (0-35 bar) psi (0-35 bar) psi ( bar) psi (0-35 bar) psi (0-35 bar) psi (0-35 bar) psi (0-35 bar) psi (3.8-2 bar) psi (8.6-3 bar) psi ( bar) psi (4.8-3 bar) psi (0-35 bar) psi (0-35 bar) psi (3.8 bar) 55 psi (3.8 bar) 30 psi (2. bar) 40 psi (.4 bar) psi X ( - 4 bar X) psi X (0.6-4 bar X) psi X (3.8-2 bar X) psi X (2. -2 bar X) psi X ( bar X) psi X (.7-4 bar X) 0-50 psi X ( bar X) psi X (.7-4 bar X) psi X (3.8-2 bar X) psi X (2.8-2 bar X)

7 Specifications SONOI/PIOT SPIITIONS TPRTUR O R, OI, & SONOI PUNR RONTIONS OR VR SRVI ONITIONS T VRIOUS TPRTURS Temperature Range edium/mbient Temperature O Ring Seals (ll Valves) ** Solenoid Plungers & oils for lectrical Service Intermittent uty ontinuous uty (ead nd Service) or Service Service Service oil Solenoid Plunger oil Solenoid Plunger oil Solenoid Plunger bove 300 (50 ) Valves not recommended Valves not recommended Valves not recommended Valves not recommended 200 to 300 (95 to 50 ) Suffix -55 Valves not recommended Valves not recommended Valves not recommended 50 to 200 (65 to 95 ) Suffix -55 Suffix -T Suffix -3 (which is included in coil suffix -T) Suffix -T Suffix -3 (which is included in coil suffix -T) Suffix -T * Suffix -3 (which is included in coil suffix -T) 20 to 50 (50 to 65 ) Standard NR (nitrile) NR (high nitrile)-(suffix -) (fluorocarbon)-(suffix -55) Standard* Suffix -3 Standard Suffix -3 Suffix -T * Suffix -3 (which is included in coil suffix -T) 20 to 20 (-5 to 50 ) 5 to 20 (-5 to -5 ) -40 (-40 ) to +200 (+93 ) -60 (-5 ) To maximum, based on coil type and agency approvals Standard NR (nitrile) NR (high nitrile)-(suffix -) (fluorocarbon)-(suffix -55) Standard NR (nitrile) NR (high nitrile)-(suffix -) (fluorocarbon)-(suffix -55) ow temperature NR (nitrile), ompound S2953/I-P-5353, (Suffix -44) thylene-propylene (PR) (Suffix -P) Standard Standard Standard Suffix -3 Standard Suffix -3 Standard Standard Standard Suffix -3 Standard Suffix -3 ow Temp ow Temp ow Temp -P -P -P * t elevated temperature in service the coil develops less power because resistance increases. onsult actory with application details. ** O ring seals in the table refers only to dynamic seals. Occasionally it is necessary to change static seals due to temperature or chemical requirements. SRIS T: ynamic seals are a combination of T (tetrafluoroethylene) and NR (nitrile). Only the NR (nitrile) rings can be changed. Temperature range of Series T valves is 32 to 30 (0 to 55 ). This guide is designed for evaluation by technically competent persons and is thought to be reliable, but Versa Products o., Inc. shall have no responsibility or liability for the results obtained or damages resulting from such use. 7

8 Specifications SONOI/PIOT SPIITIONS OI OVR Standard provides /2 NPT female conduit connection. Use Suffix 243 for grommeted housing with wire leads. Use Suffix or for style coil connector. OIS Standard coil lead lengths are at least 24 (60cm). onsult factory for availability of longer lead lengths ONTUOUS UTY OI VOTS* SRIS SONOI OPRTOR (Service & Type) Voltage oil ode # Inrush mp olding mp Ohm Voltage oil ode# mp-inrush & olding Ohm V & T ORRY or ZROUS ORRY ZROUS Standard, Suffix -243, Suffix -P, Suffix -XX Suffix - or - 24/60 20/60 240/60 480/60 24/50 0/50 230/50 240/50 20/60 240/60 0/50 220/ [(d) lameproof] ow Watt Suffix-3567 Suffix XN 2/60 24/60 48/60 20/60 240/ [(d) lameproof] [(e) Increased Safety] Suffix -XS** or -XT** **or XT & XS consult factory [(d) lameproof] Suffix -XN 20/60 240/60 0/50 220/50 24/60 20/60 240/60 24/50 0/50 220/50 240/ Suffix --XIS, - -XIS [(ia) Intrinsic Safe] Suffix --XISX6, - -XISX6 Suffix -XI, -XI, -XI [(m) ncapsulation] [(e) Increased Safety] Suffix -X, -X -X, -X Suffix -X, -X, -X, -X * oils for voltages other than those listed above, may be available. lass (Suffix T) coils are available for both ordinary and hazardous service. ontact factory for availability and delivery information. 8

9 Specifications ZROUS OTION OTION SUIX TIS Suffix Reference Suffix escription - 72 wire leads -4 Solenoid vent, water proof nut -2 /8 npt Solenoid vent - ¼ npt Solenoid vent -T lass coil -4 Solenoid vent dust nut watt Solenoid -.8 watt Solenoid -V 0.85 watt (World Solenoid) -X.8 watt (World Solenoid) -Z 0.5 watt (World Solenoid) -P Potted coil; N 4 -PS Potted coil, male conduit; -ST Stainless Solenoid housing -VT dd on unction ox -X World Solenoid; N 4/IP67 -XN TX Solenoid -XT World Solenoid; N 4/IP67 -XV World Solenoid; N 4/IP67 -XX North merican Solenoid -303 Integral diode North merican (-XX) ombination Suffix Included Suffix -XX -XX, -T -XX4 -XX, -4, -T -XX -XX, -PS -XX4 -XX, -4, -PS -XX -XX, -T, -PS -XX4 -XX, -4, -T, -PS -XX -XX, -ST -XX4 -XX, -4, -ST -XX -XX, -P, -ST -XX4 -XX, -4, -P, -ST -XX -XX, -T, -ST -XX4 -XX, -4, -T, -ST -XX -XX, -, -ST -XX4 -XX, -4, -, -ST -XX -XX, -T, -P, -ST -XX4 -XX, -4, -T, -P, -ST -XX -XX, -, -P, -ST -XX4 -XX, -4, -, -P, -ST North merican (-XX) (ont.) ombination Suffix Included Suffix -XX -XX, -T, -, -P, -ST -XX4 -XX, -4, -T, -, -P, -ST -XX -XX, -P -XX4 -XX, -4, -P -XX -XX, -T, -P -XX4 -XX, -4, -T, -P -XXN -XX, -, -P -XXN4 -XX, -4, -, -P -XXQ -XX, -T, - -XXQ4 -XX, -4, -T, - -XXR -XX, - -XXR4 -XX, -4, - -XXS -XX, -, -ST -XXS4 -XX, -4, -, -ST -XXU -XX, -T, -, -ST -XXU4 -XX, -4, -T, -, -ST -XXV -XX, - -XXV4 -XX, -4, - -XXW -XX, -, -T, -2, -P, -ST -XXW4 -XX, -4, -, -T, -P, -ST TX (-XN) ombination Suffix Included Suffix -XN -XN, -T -XN -XN, -ST -XN -XN, -P, -ST -XN4 -XN, 4, -P, -ST -XN -XN, -T, -ST -XN -XN, -, -ST -XN -XN-T, -P, -ST -XN -XN, -, -P, -ST -XN4 -XN, -4, -, -P, -ST -XN -XN, -T, -, -P, -ST -XN -XN, -P -XN4 -XN, -4, -P -XN -XN, -T, -P -XNN -XN, -, -P -XNN4 -XN, -4, -, -P -XNP -XN, -T, -, -P -XNQ -XN, -T, - TX (-XN) (cont.) ombination Suffix Included Suffix -XNR -XN, - -XNS -XN, -, -ST -XNU -XN, -T, -, -ST -XNV -XN, - -XNX -XN, -, -PS -XNWS -XN, -VT, -, -PS World Solenoid (-X, -XV, -XT) ombination Suffix Included Suffix -XS -XS, -T, -X -XS2 -XS, -T, -X, -2 -XS3 -XS, -T, -X, - -XS4 -XS, -T, -X, -4 -XS5 -XS, -T, -X, XS6 -XS, -T, -X, -2, XS7 -XS, -T, -X, -, XS8 -XS, -T, -X, -4, XS9 -XS, -T, -X, -4 -XS0 -XS, -T, -X, -4, XT -XT, -T, -X -XT2 -XT, -T, -X, -2 -XT3 -XT, -T, -X, - -XT4 -XT, -T, -X, -4 -XT5 -XT, -T, -X, XT6 -XT, -T, -X, -2, XT7 -XT, -T, -X, -, XT8 -XT, -T, -X, -4, XT9 -XT, -T, -X, -4 -XT0 -XT, -T, -X, -4, XV -XV, -T, -X -XV2 -XV, -T, -X, -2 -XV3 -XV, -T, -X, - -XV4 -XV, -T, -X, -4 -XV9 -XV, -T, -X, -4 -XT -XT, -T, -X -XT2 -XT, -T, -X, -2 -XT3 -XT, -T, -X, - -XT4 -XT, -T, -X, -4 -XT9 -XT -T, -X, -4 Recommended azardous ocation Solenoid Option Packages North merican - S ertification/power TX - Ix - TRO nclosure/wire Standard Power ow Watt* Standard Power ow Watt* Steel, lectroless Nickel Plated, 24 Inch eads -XX4 -XXN4 -XN4 -XNN4 Stainless Steel, igh Performance 430 type, 24 wire leads -XX4 -XV9 -XN4 -XT9 Stainless Steel, 36 type, unction ox with Terminal Strip -XT9** -XS9 *.8 watt solenoid. lso available 0.5 and 0.85 watt. onsult factory for availability. **ll the XT type solenoids are World Solenoids. ertified for North merica, TX, Ix and TRO and more. or complete solenoid specifications please see above and page

10 SONOI PIOT TRI OPRTOR SPIITIONS Solenoid/Pilot actuated Series V & T valves are available with a variety of different solenoids for both nonhazardous and hazardous locations. asic details of actuators are listed below. or additional data consult factory. Non azardous ocation Solenoids Suffix Protection lassification rea lassification and (as rouping) gency pprovals Ingress Protection None or -U eneral Purpose Indoor & Outdoor S N,2,3 - - (Shown) eneral Purpose Indoor & Outdoor N 4; IP65 azardous ocation Solenoids gency pprovals North merica World* Suffix* Protection lassification Zones ivisions rea lassification and (as rouping) gency Ingress Protection -XX -XX azardous ocations I, IV, rp ( & ) II, IV, rp (, & ) Temp T3 I, IV 2 rp ( ) II, IV 2 rp (, & ) Temp T3 U S N 7 & 9 -XN (d) lameproof x d II+2 T3 T6 b II 2 x d II+2 T3 T6 b Ix TX IP66/67 -XV -XT azardous ocations (d) lameproof I, IV, rp (,, ) II, IV, rp (,, ) III I, IV 2, rp (.,, ) II, IV, rp (,, ) III S US N 4, 4X, 6P, IP66 -XT (d) lameproof (e) Increased Safety, I, Zn /x de II T*, II Zn, 2 x t 2, IP 2 x II 2 /x d e II T3 T6 b x tb III T3 T6 b TX - Ix TRO IP66/67/68 -XS -X -X -X -X -XI -XI (mb) ncapsulation (e) Increased Safety (t) Tight ust (ia) Intrinsic Safe -XISX6 Intrinsic Safe I, IV, rp (,, & ) -XIS II, IV, rp (,, & ) III x e mb II T5, T6 b x tb III T85º, T00º b II 2 x e mb II T5...T6 b II 2 x tb III T85º...T00º b x (ia) II T4...T6 b x (ia) III T30º...T80º b II 2 x ia II T4...T6 II 2 x ia 2 T30º, T80º II 2 x ia II T4 T6 b II 2 x ia II T4 T6 b Ix TR U TX Ix TR U TX TX Ix TR U actory utual S IP67 IP67 IP65 *or additional suffix options see page 9 0

11 OI OS: Identify the solenoid frequency and voltage, consisting of a Rating ode and Voltage as shown at right. oil codes complete the part number for a solenoid operated valve. Rating ode = 60z frequency = irect urrent () = 50z frequency Voltage Indicated by three digits: e.g. 24 volts = volts = =,20Volts/60hz Voltage (Power) ll usual 50 z & 60 z (7.3W) ll usual (9.5W) 24V60, 20V60, 240V60 (8.5W) 24V50, 0V50, 220V50 (8.5W) 2V, 24V, 48V (0.5W) lectrical haracteristics lass epoxy molded coil (55º). ontinuous duty, 2 leads 24 (60 cm). lass epoxy molded coil (55º), with 3 spade terminals and mini socket with P9 cable gland. ontinuous duty. iscellaneous Steel cover with /2 NPT conduit entry. Spade terminals (3) (8mm) onnector: ISO 43650, orm P9 cable gland (-) /2 NPT conduit hub (-) Voltage (Power) lectrical haracteristics iscellaneous 50 z & 60 z (7.3W), (9.5W) : 2V60, 24V60, 48V60, 20V60, 240V60 : 6V, 2V, 24V, 48V 50 z & 60 z (6W), (7.2W) & (.8W) : 2V60 (02), 24V60 (024), 48V60 (048), 20V60 (20), 240V60 (20) : 6V (006), 2V (02), 24V (024), 48V (048) lass epoxy molded coil (55º). continuous duty. 3 leads 24 (60 cm). Plated steel coil housing with /2 NPT conduit entry. or additional solenoid options see pages 9 - Plated steel coil housing with 20 x.5 conduit entry. round terminal on cover. or additional solenoid options see pages 9 - : 20V60Z (20), 240V60Z (240) 0V50Z (0), 220V50Z (230) : 2V (02), 24V (024) 48V (048), 20V (20).8 watt standard. or 0.85 watt consult factory. 24V (4W) (onsult factory for other voltage options) 24V 0W inrush, 2.6W holding) (onsult factory for other voltages) 24V (0.8W) (onsult factory for other voltages) 24V (.6 watt max.) System voltage prior to barrier poxy molded coils rated for continuous duty, lass 80. ontinuous duty coil & rectifier, including surge suppression, potted within housing. ontinuous duty coil & power controller potted within housing. ontinuous duty coil and power controller potted within housing. lass epoxy molded coil (55º). ontinuous duty. Suffix etail Ordering ode Stainless steel coil housing XV XT.8 watt Standard (vent to atmosphere) -XV -XT /8 dapter (-2) -XV2 -XT2 /4 dapter (-) -XV3 -XT3 ust Nut (-4) -XV4 -XT4 Water proof nut (-4) -XV9 -XT9 Stainless steel coil housing with Suffix etail Ordering ode internal unction ox. Internal and 20 onnection ½ onnection external ground screw. No iode iode No iode iode Standard (vent to atmosphere) XS XS5 XT XT5 /8 dapter (-2) XS2 XS6 XT2 XT6 /4 dapter (-) XS3 XS7 XT3 XT7 ust Nut (-4) XS4 XS8 XT4 XT8 ust xcluder (-4) XS9 XS0 XT9 XT0 Thick wall epoxy coil housing with integral junction box. Internal ground terminal. 20 x.5 conduit entry: (-X), (-X), /2 NPT conduit entry with adapter: (-X), (-X) Requires the use of an approved safety barrier or isolator. Thick wall epoxy coil housing and integral junction box. Internal ground terminal. 20 x.5 conduit entry: (-XI) /2 NPT conduit entry with adapter: (-XI) Requires the use of an approved barrier or isolator. aximum operating system voltage before barrier 28V. aximum pilot pressure 5 psi (8 bar). 3 spade terminals, ISO 43650, orm P9 cable gland (-) /2 NPT conduit entry: (-)

12 OW TO ST VRS VV very letter and digit in the product number of a has significant meaning. The product number shown below (VS-4522-U-4-20) indicates the following: V S U 4 20 PNUTI SRVI SPR RTURN SONOI PIOT- TUT OUR-WY /2 NPT SI PORTS (PIOT) TWO POSITION UPRIT STY SONOI SONOI XUST/ UST XUR NUT 20V60 OI SI PROUT NUR VV SRIS V S 4 5 TUT VIS ON T N O VV OO T T ON RIT N O VV OO T T UNTION TYP O VV VV PORT SIZ V Series V Valve Pneumatic service to 200 psi (4 bar) T Series T Valve ydraulic service to 500 psi (35 bar) Special actuator of any type. etter indicates position of actuator relative to right and left end of body. Suffix detail is required to designate specific actuator Spring entering (for 3 position manually operated valves) am Spring entering from one offset position only (for 3 position manually operated valves). Spring pulls spool to center Spring entering from one offset position only (for 3 position manually operated valves). Spring pushes spool to center Pedal (for toe operation) Solenoid-Pilot/2 position and ever (offset lever) I Palm utton Pilot-Spring entering (for 3 position pilot operated valves) ifferential Pilot Return and ever (centerline lever) N Non-return evice (for manually operated valves allows valve to be positioned anywhere without detents) P Pressure Pilot/2 position (for bleed pilot also use suffix detail - ) R Reverse Spring Return (for manually operated valves). Spring pulls valve spool S Spring Return. Spring pushes valve spool T Treadle (for heel-toe operation) U Three-etent (for manually operated valves) W iaphragm-pilot/2 position X Solenoid-Pilot Spring entering (for 3 position solenoid operated valves) Y iaphragm-pilot Spring entering (for 3 position diaphragm operated valves) Z Two-etent (for manually operated valves) 2 Two-Way 3 Three-Way 4 our-way 5 ive-way (ual Pressure our-way) 7 Two-Outlet (irectional Three-Way-iverter) 8 Two-Inlet (irectional Three-Way-Selector) 2 ⅛ NPT *3 ¼ NPT 4 ⅜ NPT *5 ½ NPT 6 ¾ NPT *7 NPT 7 with suffix-2 provides ¼ (32mm) capacity with NPT sideports or ¼ NPT subplate ports or sizes ⅛ TO ½ : ISO 228/ type threads are indicated by additional use of suffix 2. ontact factory for availability. *asic valve size 2

13 SUIX TIS STOR RT Suffix details indicate modifications or variations to the basic valve. When specifying simply add those suffix details required in alphanumeric order. isted below are the suffix detail modifications found in this catalog and the page on which they are noted. 2 2 U 4 OI O OY TIS SPOO TIS (low patterns) OPTIONS/VOTS SUIX TIS SIPORT XPIOT ody with integral, pipe threaded ports. This type of body is directly connected to pressure lines and is used for mechanical, manual and XPilot* type solenoid or pilot actuated valves. SUPT OUNT XPIOT ody-ported for subplate mounting. This type of body is screw connected to a subplate or manifold that is connected to pressure lines and is used for mechanical, manual and XPilot* type solenoid or pilot actuated valves. SIPORT PIOT ody same as 0 above, except it has an auxiliary internal passage to supply Pilot** type solenoid and pilot actuators. SUPT OUNT PIOT ody same as above, except it has internal auxiliary passage to supply Pilot** type solenoid and pilot actuators. *Separate pressure line connection needed to supply solenoid-pilot, differential pilot return or to control pressure pilot. **Internal auxiliary porting supplies pressurized medium being controlled to pilot, solenoid- pilot or differential pilot return. TWO-WY or TR-WY VVS Two Position Normally losed (actuating device must be on right end of valve) 2 Normally Open (actuating device must be on left end of valve) TR-WY VVS Three Position 3 ll ports blocked in center position OUR-WY VVS Two Position 2 Standard flow pattern: inlet alternately open to one cylinder port; opposite cylinder port alternately open to exhaust. IV-WY VVS Two Position 2 Standard flow pattern: each inlet port open (alternately) to one cylinder port; opposite cylinder port open (alternately) to exhaust OUR-WY OR IV-WY VVS Three Position (Offset flows as standard flow patterns, above) enter Position 3 ll ports blocked 4 ylinder ports open to exhaust 8 Inlet(s) open to both cylinder ports 9 ll ports open IVRTR & STOR VVS 2 2-position 3 ll ports blocked in center position ctuator Orientation: -28 thru -28, and ever, page 4-226, am actuator, page thru -227, Pilot actuator, page 5 ombination ctuators: -33, Retainer cap, page 59-3, -3, and/2-detent, page 62 & 63-4, -4, and/3-detent, page 62 & 63-5, Palm button/2-detent, page 62-30, -30 and/spring return, page 62 & 63-36, Palm button/spring return, page 62-38, Solenoid/spring return, page 64-50, Pilot/2-detent, page 63-59, Pilot/spring return, page 64-73, Solenoid/detent, page 64-8, atching Resets page 68 Solenoid Options; or eneral Purpose: -243, rommeted housing, page 9 -, -, connector, page 9 - -T, lass coil, Page 9 - -P, Plug-in coil -P, -PS, Potted coil (Ingress Protection N 4/4X) Popular Option ombo s for azardous Service (see page 9-) -XX4 azardous weather protected, U/S (-XX, -4, -P, -ST) -XX4, azardous, weather protected, U/S (-XX, -4, -P) -XXN4 azardous, weather protected, U/S (-XX, -4, -, -P) -XN4 azardous, weather protected, TX -XN, 4, -P, -ST) -XN,4 azardous, weather protected, TX (-XN, -4, -, -P, -ST) -XS9 (d)lameproof, World Solenoid (-XS, -T, -X, -4) -XT9 (d)lameproof, World Solenoid (-XTS, -T, -X, -4) -XV9 weather protected, U/S (-XV, -T, -X, -4) -XT9 (d)lameproof, World Solenoid, TX (-XT, -T, -X, -4) or azardous Service WIT TR unction ox (Page 9 - ): -XS, -XT, (d)lameproof, TX, I, S, TRO -XI, -XI, -XI, (ib)intrinsic Safe, TX -X, -X, -X, (m)ncapsulation, (e)increased Safety, TX -X, -X, -X, (m)ncapsulation, (e)increased Safety, TX or azardous Service (Page 9 - ): -XX, azardous locations, U & S -XN, (d)lameproof, TX -XV, azardous locations; World Solenoid -XT, azardous locations; World Solenoid or Intrinsic Safe (see page 0) -XIS, -XISX6 (ib)intrinsic Safe, TX & S -, -, onnector for IS anual Override (page 7): -, uarded -5R, uarded-locking -, Unguarded -5R, Unguarded-locking Seals: -3, ontinuous duty solenoid/high temp core, fluorocarbon, page 9 -, igh nitrile NR, page 4, 7 & 9-3, U-cup pilot, page 6-55, luorocarbon, page 4, 7 & 9 -P, thylene propylene PR, page 4 Special service/lubrication: -, leed pilot, page 4 & 9-0, lectroless nickel plating-internal, page 4-4, Silencer/dustproof coil cover nut -2, Pilot/XPilot -55, approved silicone grease, page 7-55, Silicone grease, page 7-67, lectroless nickel plating-external, page 4-200, Plus pressure rating to 200 psi (4 bar), page 6 -, Threaded solenoid exhaust, page 7-500, ydraulic solenoid rated to 450 psi (3 bar), page 6 -NS, -NST Natural as Service ow Temperature Tagging: -NV28, Stainless steel I tag; see page 7 Solenoid actuated valves require a oil ode that indicates the specific coil current/ frequency and voltage. The oil ode consists of a letter to indicate the current frequency: Rating ode: = 60z frequency = irect urrent () = 50z frequency Three numbers follow the Rating ode to indicate voltage: xamples: Voltage ode 24V60 = V60 = 20 24V = 024 See Page 9 for specific coil and codes. 3

14 TUT VIS 58 Versa has available over thirty standard devices to actuate Series V or Series T valves. The basic purpose of the actuating device is to provide a means of shifting the valve spool back and forth in order that it may perform the various valving functions necessary. ecause of the balanced design and action of the valve spool, the force required to shift this spool is separate and unaffected by the pressure being controlled by the valve. The actuators are designed for application within 3 ranges of valve sizes: one range of actuators for all valve styles, types, and sizes ⅛ through ½ ; another range of actuators for sizes ¾ through ; and one range of actuators for ¼ valves. Within their broad respective ranges, Versa actuators are completely interchangeable on all body styles, types, and sizes. xcept for valves that are specifically normally closed or normally open, these actuators may even be shifted from end-to-end on the valve body to suit any specific piping layout or space requirement. Illustrated with brief descriptions, are the basic types of actuators in most frequent use. The letters referred to by the actuator types coincide with the prefix letters used in the product numbering system. any variations and modifications of these basic actuators are also available. few are described on Page 3 under Suffix etails. Others, such as combination actuators, can be found on Pages 62 thru 64. PRTS ORTION the number inside the box refers to the page number for parts information. imensioning information is found in each of the specific valve sections. N VR (Offset ounted) N VR (enterline ounted) P UTTON NU push or pull motion may be used to operate the hand device in order to shift the valve spool. If used with a detent device ( U or Z ) or a no-spring device ( N ) the handle must be actuated and returned manually. With a spring centering device ( ) the handle will normally be in the center position when not actuated, or will return to the center position after being actuated. To actuate with a spring centering device, the handle must be pulled to one offset position and pushed to the other. The precise differences of each of the three hand actuating devices are described below. TYP N VR (Offset ounted) The handle of this device is offset from the valve, and may be located on either side of the valve. Standard assembly places the handle on the side having the outlet ports. The entire hand actuating device may be rotated into positions at increments of 90 from vertical. (or various options available see below.) When mounted so that handle works in a vertical plane a back and forth motion is provided. When mounted so that the handle works in a horizontal plane a rotary motion is provided. STNR POSITION O N 28 OPTIONS and valves are supplied according to standard position. Seven other positions are available (Suffix Thru 28). To order simply include the Suffix 28 OPTION 28 STNR number shown. xample: VS TYP N VR (enterline ounted) The handle of this device is in the vertical plane through the centerline of the valve body and is required when dustproof feature is desired. On models up to /2 pipe size, a rubber boot provides protection from dirt and dust. The entire device may be rotated into positions at increments of 90 from vertical. To indicate, use Suffix 28, 28, or 28 as shown above for offset mounted hand lever. TYP I P UTTON (Panel ounting Is Standard) The body of the Palm utton actuator is supplied with a thread and nut that allows the actuator, when required, to be fastened to a panel with the valve behind the panel. The button will then project through and be visible from the front panel. Pushing or pulling the button activates the valve. 4

15 OOT TYP P pplied to 2-position valves only and is usually used with either a spring return ( S ) or differential pilot return ( ) device. The pedal lends itself to tiptoe operation. ctuation is accomplished when operator depresses pedal. When operator removes foot from pedal, pedal is returned or reset to unactuated position by return device on other end of valve. oot uard eavy all-steel construction protects the valve mechanism from abuse. cts as a sturdy base for valves that cannot be secured to floor or equipment, or may be bolted down for permanent installation. One size oot uard fits all sizes and types of pedal* actuated Versa Valves. * ny Versa valve with the prefix product letter, i.e. VS-330. Not suitable for treadle operation TYP T TR Provides full support for the foot of the operator. This device may be used with 2-position or 3-position valves. When used in conjunction with a spring return ( S ) or a differential pilot return ( ), actuation is provided by the operator depressing the treadle with his heel. When used with a reverse spring device ( R ), actuation is provided when operator depresses the treadle with his toe. With a detent device ( U or Z ), a no-spring return device ( N ), or a spring centering device ( ) actuation is provided by depressing with the heel to one offset position and by depressing with the toe to the other offset position. NI The cam roller may be actuated by a cam, trip bar or a straight line push from some machine member. Standard assembly provides the roller revolving in a horizontal plane, but entire device may be rotated so that cam roller acts in a plane perpendicular to mounting surface (see arrangement options below) TYP TUTOR (Normal uty) Utilizes case hardened roller. Recommended maximum pressure angle 5. TYP +suffix -8S (eavy uty) TUTOR Roller is a double shielded ball bearing. Provides overtravel of /4 for easier mounting and valve protection. Recommended maximum pressure angle 5. OPTIONS or oth Types am valves are supplied with roller axis perpendicular to the mounting surface. Should you require the axis parallel to the mounting surface (shown at right) simply include suffix number shown. xample: VS P Part Number - R (when pedal is on the right.) - (when pedal is on the left). TR TUTOR (Normal uty) oot uard STNR ROR XIS PRPNIUR PIOT OPTION (SUIX -226) ROR XIS PR The pilot actuator is a small cylinder and piston that is an integral part of the valve and which, when pressurized or unpressurized, actuates the valve. TYP P PRSSUR PIOT (for 2-position valves) 60 TYP PRSSUR PIOT (for 3-position valves) 6 This pilot requires pressure to actuate the valve, and release of the pressure to return the valve. Usually it is controlled by a small Three-Way valve. The pilot port on the ⅛ through ½ valves may be rotated to any position in 90 increments from vertical. (See option arrangements below). When used in pairs for 2-position valves, it is not necessary to maintain pressure on the actuated pilot in order for the valve to remain in actuated position. Valve will remain in last position until signalled by the opposite pilot to return. When used with spring centering feature ( ), valve will remain in center position until actuated by either pilot. To remain in actuated position, pilot must remain pressurized until it is required for valve to return to center position. STNR POSITION O PIOT T OPTIONS Pilot actuated valves (⅛ thru ½ ) are supplied with the pilot port facing the same direction as the inlet port of the valve proper. Three other positions are available (Suffix-227 thru -227). To order simply include the suffix number shown. xample: VSP TUTOR (eavy uty) PIOT

16 TUT VIS 60 6 IPR PIOT TYP P (+suffix - ) PIOT 60 The bleed type pilot is constantly supplied with pressure from the inlet of the valve and requires valve body for Pilot operation. In order to actuate the bleed type pilot, it is necessary to discharge pressure from the pilot causing a pressure drop sufficient for the return device to operate. Usually the bleed type pilot is used in pairs and is operated by Two-Way valves TYP W IPR PIOT (for 2-position valves) TYP Y IPR PIOT (for 3-position valves) 6 large pilot area allows the diaphragm pilot to function on very low signal pressures. Usually controlled by a Three-Way valve, the diaphragm pilot requires pressure to actuate. When used in pairs for 2-position valves, it is not necessary to maintain pressure on actuated pilot in order for valve to remain in actuated position. Valve will remain in last position until signalled by opposite pilot to return. When used with spring centering feature ( Y ) valve will remain in center position until actuated by pilot. To remain in actuated position, pilot must remain pressurized until it is required for valve to return to center position. 60 SONOI/PIOT low power solenoid controls a built-in pilot which provides the positive force for shifting the valve spool. When used with a spring return ( S ) or differential pilot return ( ) the valve will be actuated when the solenoid is energized and will return when the solenoid is de-energized. When used in pairs for 2-position valves, the solenoid need only be energized momentarily in order to shift the valve. The valve will then remain in the shifted position until signalled to return by the opposite solenoid. In spring centering models ( X ) the valve will remain in the center position until one of the solenoids is energized. It is necessary to maintain energy on the solenoid as long as it is desired for the valve to remain in the shifted position. When de-energized, the valve will return to the center position. STNR OIS are epoxy molded. or and voltages available, see Page SONOI Two Piloting devices are available depending upon the service to which they will be applied Pilot utilizes the pressure from the inlet of the valve, through internal passages, to the solenoid-pilot. In this type valve, only one pressure connection, the inlet, is necessary. XPilot requires a separate auxiliary pressure line to the solenoidpilot. Should be used when valve is controlling vacuum, when pressure will be below the minimum recommended for Pilot operation or when viscosity of controlled medium is such that it will impede the speed of actuation. In any case, the pressure source may be either air or liquid and is independent of the medium which is being controlled by the valve. TYP SONOI/PIOT (for 2-position valves) 56 TYP X SONOI/PIOT (for 3-position valves) 57 oils of actuator are placed on end of valve in line with the longitudinal axis through the valve. llows valve to be tucked away into relatively narrow spaces. TYP (+suffix -U ) UPRIT SONOI/PIOT (for 2-position valves) TYP X (+suffix -U ) UPRIT SONOI/PIOT (for 3-position valves) UPRIT SONOI PIOT oils of actuator are placed on top of solenoid cap so as to be perpendicular to the longitudinal axis of the valve. Shortens overall length of valve. Used as standard for valves equipped with hazardous location solenoids (suffix -XX ) or plug-in solenoids, (suffix -P ). 6

17 SO OPTIONS VI NU OVRRIS azardous Service solenoid: ow Watt azardous Service Solenoid: oil & onnector: (Suffix -, -, -, -) oil potted within housing; N 4/4X Rating: (Suffix -P) ontinuous uty Solenoid: (Suffix -3) See Pages 9 - for information on above Shown: anual Override: (Suffix -, -5R, -, -5R) Threaded Solenoid xhaust dapter: (Suffix - -2) ust excluders for solenoid exhaust: ust Proof: (Suffix -4) Water Tight: (Suffix -4) xhaust dapter - -5R - -5R -2 - ⅛ ¼ xcluders -4-4 ust Water Proof Tight SPR RTURN 6 device for returning the valve spool to its original position in 2-position valves. TYP S an be used on any type valve. Pushes valve spool. TYP R or use with and or Treadle Operated valves usually. Pulls valve spool. NO-SPR RTURN 60 6 TYP N or use on and or Treadle Operated valves only. Used when automatic return of valve spool is not desired. Spool will stay in last position placed until operated to another position TNT device that establishes a definite feel indicating when valve is in a specific position. lso prevents spool from shifting should excessive vibration be present. enerally used with and or Treadle Operated valves, but can also be supplied, in some cases, for Pilot and Solenoid/Pilot Operated valves as a ombination ctuator. TYP U 3-position detent for 3-position valves. Provides detent in each offset position and center position as well. TYP Z 2-position detent for 2-position valves. Provides detent in both offset positions. IRNTI PIOT RTURN TYP Utilizes air or oil pressure in place of spring return in order to shift valve spool. an be used in any 2-position valve. Pilot type uses pressure from inlet of valve; no auxiliary piping required. XPilot type requires auxiliary source of pressure. Used when pressure being controlled by the valve is not sufficient to shift valve spool. SPR NTR VI device for returning the valve spool to center position in and and Treadle Operated valves only. Spring centering devices for Pilot or Solenoid/Pilot Operated valves are an integral part of the specific actuator. TYP spring centers from both offset positions. TYP spring centers from only one offset position; pulls spool to center TYP spring centers from only one offset position; pushes spool to center. 60 SPR RTURN, NO SPR RTURNTNT IRNTI PIOT RTURN SPR NTR

18 WY VVS 2/2 Two-Way Valves are on-off valves. They are supplied with an inlet and an outlet port that is either normally closed or normally open to the inlet in the unactuated position. Two-Way Valves are usually used to open or close a pressure line such as in applications involving spraying, air ejection, clearing chips, powering an air motor or operating the pilot of bleedpilot valves. NO PRSSUR RN (onsult pressure rating chart on Page 6 for specific pressure rating of each valve.) Series V : partial vacuum to 200 psi (4 bar) pneumatic Series T : psi (35 bar) hydraulic TUTION NU, NI, PIOT or SONOI-PIOT OY TYPS: ll Series V & T Two-Way Valves are available in the two body types described below. ctuators used with either body type are completely interchangeable. SI-PORT The side-ported body provides threaded ports in the body of the valve. SU-PT OUNT The Sub-plate mounting valve is shown mounted on an individual sub-plate. See page 24 for details on the sub-plate. PORT SIZS: /8, /4, 3/8, /2, 3/4, and NPT /8, /4, 3/8, and /2 PORT SIZS: /8, /4, 3/8, /2, 3/4,, -/4 NPT and 8

19 2-WY Section SPIITIONS Refer to pages 3 through for information concerning: onstruction Seals Port Sizes low Pressure Ranges lectrical Temperature iltration & ubrication STNR OW PTTRNS ON T, ON OUTT 2/2 Valves must be connected in accordance with the port markings so that the flow is from the inlet port to the outlet port. The flow within the valve should never be reversed. Note: When used in a vacuum system, the vacuum pump is connected to the outlet port. TWO POSITION. VV NORY OS (actuator mounted on right end of valve) RT. T. P UNTUT TUT 2. VV NORY OPN (actuator mounted on left end of valve) T. RT. P UNTUT TUT 9

20 WY-OUNT INSIONS Port hole locations and mounting hole size and locations shown in the individual ody etail below apply to all Two-Way valves, regardless of type of actuation. The overall dimensions shown for each type of valve actuation apply whether for side ported or sub-plate mounting type. OY TI SIPORT ounting oles (2) Of Valve SUPT OUNT (ounting oles 2) Of Valve (2 OS OR OR S) SIZ Ø Ø in mm in mm in mm in mm in mm in mm in mm in mm /8-/4 SI PORT or SU-PT OUNT /8-/2 SI PORT or SU-PT OUNT /4- SI PORT or SU-PT OUNT /4 SI PORT or SU-PT OUNT N TUT VVS Ø N OST VR TYP 34 N Ø SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / NTR VR TYP 24 4 (02) /8 thru /2 valves.03 (26).63 (4) 3/4 thru ¼ valves SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / / ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports. 20

21 2-WY Section UTTON TUT VVS X PN O Ø TRV ø X SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / OOT TUT VVS/P and TR S V S P R T W U P R S T U V W SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / TUT VVS NOR UTY N Ø ROR OTION N SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / VY UTY N Ø ROR U OPN TRV* N SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ *aximum Permissible Over-Travel /4 (6.4mm) Refer to page 20 under ody etail, for port and mounting hole locations for all valves shown above. 2

22 WY-OUNT INSIONS PIOT TUT VVS S PIOT ⅛ NPT PIOT PORT OR ⅛ TRU ½ ONY ⅛ NPT PIOT PORT OR ¾ & ¼ ONY OU PIOT ⅛ NPT PIOT PORT OR ⅛ TRU ½ ONY ⅛ NPT PIOT PORT OR ¾ & ¼ ONY SIZ in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ IPR TUT VVS S IPR /4"NPT PIOT PORT SOWN WIT OPTION SPRS (SPIY Y SUIX -) OU IPR /4"NPT PIOT PORT SOWN WIT OPTION SPRS (SPIY Y SUIX -) SIZ in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / / Refer to page 20 under ody etail, for port and mounting hole locations for all valves shown above. ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports 22

23 2-WY Section SONOI TUT VVS/ (Non azardous Service) S SONOI 8 NPT PU OR XPIOT PORT (25).75 (9) NU OVRRI (OPTION) 2 NPT ONUIT ONNTION 4 PTR (OPTION - S NOT OW) OU SONOI.75 (9) (25) 8 NPT PU OR XPIOT PORT (25).75 (9) NU OVRRI 2 NPT ONUIT ONNTION (OPTION) 4 PTR (OPTION - S NOT OW) NPT ONUIT ONNTION 2 SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ NOT: dapter is supplied when specified, by adding suffix - to product number SONOI TUT VVS/UPRIT (Non azardous Service. or hazardous service valves see pages 9 -.) S SONOI PTR (OPTION - S NOT OW) X 0.75 (9 mm) ⅛ NPT XPIOT PORT OR ¾ & ¼ ONY NPT ONUIT ONNTION 2 X X ⅛ NPT XPIOT PORT OR ⅛ & ½ ONY 0.4 (0 mm).375 (35 mm) NU OVRRI (OPTION) OU SONOI 4 PTR (OPTION - S NOT OW) 0.75 (9 mm) X ⅛ NPT XPIOT PORT OR ¾ & ¼ ONY ⅛ NPT XPIOT PORT OR ⅛ & ½ ONY 2 NPT ONUIT ONNTION 0.4 (0 mm) 0.4 (0 mm) X ⅛ NPT XPIOT PORT OR ⅛ & ½ ONY.375 (35 mm) NU OVRRI (OPTION) X SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ NOT: dapter is supplied when specified, by adding suffix - to product number Refer to page 20 under ody etail, for port and mounting hole locations for all valves shown above. ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports. 23

24 Will mount series V or T sub-plate type valves. ultiple valve station manifolds (V o-ordinates) for the mounting of several valves are also available. See page 25. or sub-plates to mount plug-in solenoids, consult factory. SI-PORT SU-PTS (S STTION TYP) OR TWO-WY VVS OTTO PORT X X N (3 OS) Q (N TR - 2 OS) P (NPT - 3 OS) N (3 OS) Q (N TR - 2 OS) P (NPT - 3 OS) R (SOT P SRWS RN - 2 OS) SU-PT PROUT Side NURS *Product numbers Ported shown provide NPT ports. or ports with thread add Suffix-2. ottom Ported VV SIZ /8 /4 3/8 /2 3/4 /4 /4 in mm in mm in mm in mm in mm in mm in mm in mm See note below See note below N * P /8 NPT /4 NPT 3/8 NPT /2 NPT 3/4 NPT NPT /4 NPT /4 NPT Q /4 N /4 N 5/6 N 5/6 N 3/8 N 3/8 N 3/8 N 3/8 N R onsult factory for mounting hole and bottom port locations.

25 V O-ORTS 2-WY Section 2 & 3-STTION OR TWO-WY VVS Three-Way valves may be intermixed on the same manifold. (4 or more valve stations can be provided by joining multiples of the 2 or 3-station) 3-STTION SU-PT P 2-STTION SU-PT O-ring interface seals (3) X X X X X X W (NPT) nd View (2 OUNT OS PR PT) Top View of Valve V (NPT) ottom View V (NPT) Side View N otted extension shows detail for 3-Station o-ordinate. Pilot anifold dapter plates are available for mounting pilot valves with manifold mounted pilot ports. onsult factory. rawing ey N P V W or /4 Valves or /2 Valves 3 (76) 4 (02).5 (38) 2 (5) 0.84 (2) (25) 2.6 (55) 3 (76) INSIONS 2 (5) 2.5 (64).63 (4) 2 (5) 2.3 (54) 3 (76) ey letters - refer to sizes common to both 2 and 3-Station o-ordinates 0.34 (9) 0.5 (3) 7.5 (9) 0 (254) 6.88 (75) 9.38 (238) 3-Station o-ordinates only OW TO ORR O-ORTS 5.38 (37) 7 (78) 4.75 (2) 6.38 (62) 2-Station o-ordinates only Product numbers shown are for o-ordinates only. Valves and accessories are ordered separately. or help in specifying required valves refer to pages 2 and ommon Port sizes. When Two-Way and Three-Way valves are to be mounted on the same manifold, a PU is required for each of the unused Two-Way exhaust ports on the mounting face of the o-ordinate. These plugs are assembled, but must be ordered separately as follows: V-P-43 for /4 size valves; V-P-45 for /2 size. Inches (mm) Valve Size NPT o-ordinate Product No. /4 V-333-** /2 V-353-** ccessories Valve Size /4 /2 Pilot anifold dapter V-P-33 V-P-35 Station lank S-33 S-35 ** Insert No. of valve mounting stations required. xample: 5 station o-ordinate for /2 Valves is V with NPT threads. Required to block and protect any unused or future valve mounting stations. 25

26 WY VVS 3/2 and 3/3 Three-Way Valves may be either normally open or normally closed to the inlet in the unactuated position. Three-Way Valves are usually used to control single acting cylinders or the pilots of other valves or devices. Two additional types of Three-Way Valves are available. iverter: a common inlet that directs flow to either one of two outlets. Selector: two separate inlets that are alternately connected to a common outlet. NO PRSSUR RN (onsult pressure rating chart on Page 6 for specific pressure rating of each valve.) Series V : partial vacuum to 200 psi (4 bar) pneumatic Series T : psi (35 bar) hydraulic TUTION NU, NI, PIOT or SONOI-PIOT OY TYPS: ll Series V & T Three-Way Valves are available in the two body types described below. ctuators used with either body type are completely interchangeable. SI-PORT The side-ported body provides threaded ports in the body of the valve. SU-PT OUNT The Sub-plate mounting valve is shown mounted on an individual sub-plate. See page 32 for details on the sub-plate. PORT SIZS: /8, /4, 3/8, /2, 3/4, and NPT /8, /4, 3/8, and /2 PORT SIZS: /8, /4, 3/8, /2, 3/4,, -/4 NPT and 26

27 SPIITIONS Refer to pages 3 through for information concerning: onstruction Pressure Ranges Seals lectrical Port Sizes Temperature low iltration & ubrication STNR OW PTTRNS Valves must be connected in accordance with the port markings so that the flow is from the inlet port to the outlet port or from outlet port to exhaust.. The flow within the valve should never be reversed. Note: When used in a vacuum system, the vacuum pump is connected to the exhaust port 3-WY Section TR WY 2 POSITION 3/2. VV NORY OS (actuator mounted on right end of valve) RT. T. X X P UNTUT TUT 2. VV NORY OPN (actuator mounted on left end of valve) T. RT. X X P UNTUT TUT To indicate substitute number 7 for first digit of product number. OUT OUT 2 OUUTT2OUT 2 OUT T. RT. 3 POSITION 3/3 (all ports blocked in the center position) To indicate substitute number 3 for fourth digit of product number. Otherwise Product Number and offset flow patterns remain the same. TWO OUTT (iverter) 2 POSITION 3/2 3 POSITION 3/3 (all ports blocked in the center position) TWO T (Selector) 2 POSITION 3/2 UT 2OO OUT 2 To indicate substitute number 3 for fourth digit of product number. Otherwise Product Number and offset flow patterns remain the same. To indicate substitute number 8 for first digit of product number. RT. OUT P P2 P T. 3 POSITION 3/3 (all ports blocked in the center position) To indicate substitute number 3 for fourth digit of product number. Otherwise Product Number and offset flow patterns remain the same. 27

28 WY-OUNT INSIONS Port hole locations and mounting hole size and locations shown in the individual ody etail below apply to all Three-Way valves, regardless of type of actuation. The overall dimensions shown for each type of valve actuation apply whether for side ported or sub-plate mounting type. OY TI SIPORT (ounting oles 2) SUPT OUNT (See page 32 for sub-plate details) X Of Valve (ounting oles 2) Of Valve (3 OS OR OR S) SIZ Ø Ø in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/4 SI PORT or SU-PT OUNT /8-/2 SI PORT or SU-PT OUNT /4- SI PORT or SU-PT OUNT /4 SI PORT or SU-PT OUNT N TUT VVS Ø N OST VR TYP 34 /* * N Ø SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / *imensions for Spring-entering Valves NTR VR TYP Ø 24 4 (02) /8 thru /2 valves /*.03 (26).63 (4) 3/4 thru ¼ valves SIZ * in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / / *imensions for Spring-entering Valves ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports. 28

29 3-WY Section UTTON TUT VVS X PN O Ø TRV n /* X SIZ * in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / *imensions for Spring-entering Valves OOT TUT VVS/P and TR S V S P R T /* W U * P R S T U V W SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / *imensions for Spring-entering Valves TUT VVS NOR UTY N Ø ROR OTION N SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / VY UTY N Ø ROR U OPN TRV* N SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ *aximum Permissible Over-Travel /4 (6.4mm) Refer to page 28 under ody etail, for port and mounting hole locations for all valves shown above. 29

30 WY-OUNT INSIONS PIIOT TUT VVS (and Spring entering) S PIOT ⅛ NPT PIOT PORT OR ⅛ TRU ½ VVS ONY ⅛ NPT PIOT PORT OR ¾ & ¼ VVS ONY OU PIOT /* /* /* /* ⅛ NPT PIOT PORT OR ⅛ TRU ½ VVS ONY ⅛ NPT PIOT PORT OR ¾ & ¼ VVS ONY SIZ * * in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ *imensions for Spring-entering Valves IPR TUT VVS S IPR (and Spring entering) /4"NPT PIOT PORT SOWN WIT OPTION SPRS (SPIY Y SUIX -) OU IPR /4"NPT PIOT PORT /* /* SOWN WIT OPTION SPRS (SPIY Y SUIX -) * SIZ in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / / *imensions for Spring-entering Valves Refer to page 28 under ody etail, for port and mounting hole locations for all valves shown above. ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports 30

31 3-WY Section SONOI TUT VVS/ (Non azardous Service Valves) S SONOI 8 NPT PU OR XPIOT PORT (25).75 (9) NU OVRRI (OPTION) 2 NPT ONUIT ONNTION 4 PTR (OPTION - S NOT OW) OU SONOI.75 (9) (25) 8 NPT PU OR XPIOT PORT (25).75 (9) /* NU OVRRI 2 NPT ONUIT ONNTION (OPTION) /* 4 PTR (OPTION - S NOT OW) 2 NPT ONUIT ONNTION * SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ *imensions for Spring-entering Valves NOT: dapter is supplied when specified, by adding suffix - to product number SONOI TUT VVS/UPRIT (Non azardous Service Valves. or hazardous service valves see Page 9 -.) S SONOI 4 PTR (OPTION - S NOT OW) X 0.75 (9 mm) 2 NPT ONUIT ONNTION X X 0.4 (0 mm) ⅛ NPT XPIOT PORT OR ⅛ TRU ½ ONY ⅛ NPT XPIOT PORT OR ¾ & ¼ ONY.375 (35 mm) NU OVRRI (OPTION) OU SONOI 4 PTR (OPTION - S NOT OW) X 8 NPT XPIOT PORT OR 8 TRU 2 ONY 0.4 (0 mm) /* /* 0.75 (9 mm) 2 NPT ONUIT ONNTION /* /* X ⅛ NPT XPIOT PORT OR ⅛ TRU ½ ONY 0.4 (0 mm) ⅛ NPT XPIOT PORT OR ¾ & ¼ ONY.375 (35 mm) NU OVRRI (OPTION) SIZ * * X in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ *imensions for Spring-entering Valves NOT: dapter is supplied when specified, by adding suffix - to product number Refer to page 28 under ody etail, for port and mounting hole locations for all valves shown above. ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports. 3

32 Will mount series V or T sub-plate type valves. ultiple valve station manifolds (V o-ordinates) for the mounting of several valves are also available. See page 33. or sub-plates to mount plug-in solenoids, consult factory. SI-PORT SU-PTS (S STTION TYP) OR TR-WY VVS OTTO PORT X X N (3 OS) Q (N TR - 2 OS) P (NPT - 3 OS) N (3 OS) Q (N TR - 2 OS) P (NPT - 3 OS) R (SOT P SRWS RN - 2 OS) SU-PT PROUT NURS *Product numbers shown provide NPT ports. or ports with thread add Suffix-2. VV SIZ Side Ported ottom Ported /8 /4 3/8 /2 3/4 /4 /4 in mm in mm in mm in mm in mm in mm in mm in mm See note below See note below N * P /8 NPT /4 NPT 3/8 NPT /2 NPT 3/4 NPT NPT /4 NPT /4 NPT Q /4 N /4 N 5/6 N 5/6 N 3/8 N 3/8 N 3/8 N 3/8 N R onsult factory for mounting hole and bottom port locations.

33 3-WY Section V O-ORTS 2 & 3-STTION OR TR-WY VVS Three-Way valves may be intermixed on the same manifold. (4 or more valve stations can be provided by joining multiples of the 2 or 3-station) 3-STTION SU-PT P 2-STTION SU-PT O-ring interface seals (3) X X X X X X W (NPT) nd View (2 OUNT OS PR PT) Top View of Valve V (NPT) ottom View V (NPT) Side View N leed ontrol or Pilot anifold dapter plates are available. onsult factory. rawing ey N P V W or /4 Valves or /2 Valves 3 (76) 4 (02).5 (38) 2 (5) 0.84 (2) (25) 2.6 (55) 3 (76) INSIONS 2 (5) 2.5 (64).63 (4) 2 (5) 2.3 (54) 3 (76) ey letters - refer to sizes common to both 2- and 3-Station o-ordinates 0.34 (9) 0.5 (3) 7.5 (9) 0 (254) 6.88 (75) 9.38 (238) 3-Station o-ordinates only 5.38 (37) 7 (78) 4.75 (2) 6.38 (62) 2-Station o-ordinates only OW TO ORR O-ORTS Product numbers shown are for o-ordinates only. Valves and accessories are ordered separately. or help in specifying required valves refer to pages 2 and ommon Port sizes. When Two-Way and Three-Way valves are to be mounted on the same manifold, a PU is required for each of the unused Two-Way exhaust ports on the mounting face of the o-ordinate. These plugs are assembled, but must be ordered separately as follows: V-P-43 for /4 size valves; V-P-45 for ½ size. Inches (mm) Valve Size NPT o-ordinate Product No. /4 V-333-** /2 V-353-** ** Insert No. of valve mounting stations required. xample: 5 station o-ordinate for /2 Valves is V with NPT threads. Valve Size SSORIS /4 /2 leed ontrol dapter V--33 V--35 Pilot anifold dapter V-P-33 V-P-35 leed ontrol & Pilot anifold dapter V V Station lank S-33 S-35 Required to block and protect any unused or future valve mounting stations. 33

34 WY VVS 5/2 and 5/3 our-way Valves are generally used to control double acting cylinders. They function to alternately direct pressure to one of two outlets at the same time exhausting pressure from the opposite outlet. NO PRSSUR RN (onsult pressure rating chart on Page 6 for specific pressure rating of each valve.) Series V : partial vacuum to 200 psi (4 bar) pneumatic Series T : psi (35 bar) hydraulic TUTION NU, NI, PIOT or SONOI-PIOT OY TYPS: ll Series V & T our-way Valves are available in the two body types described below. ctuators used with either body type are completely interchangeable. SI-PORT The side-ported body provides threaded ports in the body of the valve. SU-PT OUNT The Sub-plate mounting valve is shown mounted on an individual sub-plate. See page 40 for details on the sub-plate. PORT SIZS: /8, /4, 3/8, /2, 3/4, and NPT /8, /4, 3/8, and /2 PORT SIZS: /8, /4, 3/8, /2, 3/4,, -/4 NPT and 34

35 4-WY Section SPIITIONS Refer to pages 3 through for information concerning: onstruction Seals Port Sizes low Pressure Ranges lectrical Temperature iltration & ubrication STNR OW PTTRNS ON T, TWO OUTTS, TWO XUSTS Valves must be connected in accordance with the port markings so that the flow is from the inlet port to the outlet port or from outlet port to exhaust.. The flow within the valve should never be reversed. Note: When used in a vacuum system, the vacuum pump is connected to the outlet port TWO POSITION 5/2 RT. T. X X X X P Inlet open to cylinder port, cylinder port, open to exhaust. Inlet open to cylinder port, cylinder port open to exhaust. 3 POSITION 5/3 iagrams below show center position only. Offset positions are same as shown above for 2-position types. To indicate particular center pattern required, substitute number shown within corresponding diagram for fourth digit of product number. 3 4 ll ports blocked ylinder ports open to exhaust. 8 9 Inlet open to both cylinder ports. ll ports open. 35

36 WY-OUNT INSIONS Port hole locations and mounting hole size and locations shown in the individual ody etail below apply to all our-way valves, regardless of type of actuation. The overall dimensions shown for each type of valve actuation apply whether for side ported or sub-plate mounting type. OY TI SIPORT SUPT OUNT (See page 40 for sub-plate details) X X (ounting oles 3) (ounting oles 3) (5 OS OR OR S) SIZ Ø Ø in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/4 SI PORT or SU-PT OUNT /8-/2 SI PORT or SU-PT OUNT /4- SI PORT or SU-PT OUNT /4 SI PORT or SU-PT OUNT N TUT VVS OST VR TYP N Ø /* * N Ø SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / *imensions for Spring-entering Valves NTR VR TYP 24 4 (02) /8 thru /2 valves /*.03 (26).63 (4) 3/4 thru /4 valves * SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / / *imensions for Spring-entering Valves ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports. 36

37 4-WY Section UTTON TUT VVS X PN O Ø TRV Ø /* X * SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4-/ *imensions for Spring-entering Valves OOT TUT VVS/P and TR S V S P R T W U /* * P R S T U V W SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / *imensions for Spring-entering Valves TUT VVS NOR UTY N Ø ROR OTION N SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / VY UTY N Ø ROR U OPN TRV* N SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ *aximum Permissible Over-Travel /4 (6.4mm) Refer to page 36 under ody etail, for port and mounting hole locations for all valves shown above. 37

38 WY-OUNT INSIONS PIIOT TUT VVS S PIOT ⅛ NPT PIOT PORT OR ⅛ TRU ½ ONY OTION of ⅛ NPT PIOT PORT on ¾ & ¼ ONY OU PIOT /* /* /* /* ⅛ NPT PIOT PORT OR ⅛ TRU ½ ONY OTION of ⅛ NPT PIOT PORT on ¾ & ¼ ONY * * SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ *imensions for Spring-entering Valves IPR TUT VVS S IPR /4"NPT PIOT PORT SOWN WIT OPTION SPRS (SPIY Y SUIX -) OU IPR /4"NPT PIOT PORT /* /* SOWN WIT OPTION SPRS (SPIY Y SUIX -) SIZ * in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / / Refer to page 36 under ody etail, for port and mounting hole locations for all valves shown above. ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports *imensions for Spring-entering Valves 38

39 U.S../ N U.S../ N 4-WY Section SONOI TUT VVS/ (Non azardous Service) S SONOI ⅛ NPT PU OR XPIOT PORT (25).75 (9) NU OVRRI (OPTION) ½ NPT ONUIT ONNTION ¼ PTR (OPTION - S NOT OW) OU SONOI.75 (9) (25) ⅛ NPT PU OR XPIOT PORT.75 (25) (9) /* NU OVRRI ½ NPT ONUIT ONNTION (OPTION) /* ½ NPT ONUIT ONNTION ¼ PTR (OPTION - S NOT OW) * SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ *imensions for Spring-entering Valves NOT: dapter is supplied when specified, by adding suffix - to product number SONOI TUT VVS/UPRIT (Non azardous Service Valves. or hazardous service valves see Page 9 -.) S SONOI ¼ PTR (OPTION - S NOT OW) 0.75 (9 mm) X ½ NPT ONUIT ONNTION X X ⅛ NPT XPIOT PORT OR ⅛ TRU ½ ONY 0.4 (0 mm) VRS R ⅛ NPT XPIOT PORT OR ¾ & ¼ ONY.375 (35 mm) NU OVRRI (OPTION) OU SONOI ¼ PTR (OPTION - S NOT OW) X 0.75 (9 mm) ⅛ NPT XPIOT PORT OR ⅛ TRU ½ ONY ½ NPT ONUIT ONNTION 0.4 (0 mm) /* /* 0.4 (0 mm) /* /* X ⅛ NPT XPIOT PORT OR ⅛ TRU ½ ONY VRS R ⅛ NPT XPIOT PORT OR ¾ & ¼ ONY.375 (35 mm) NU OVRRI (OPTION) * * X SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ *imensions for Spring-entering Valves NOT: dapter is supplied when specified, by adding suffix - to product number Refer to page 36 under ody etail, for port and mounting hole locations for all valves shown above. ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports. 39

40 Will mount series V or T sub-plate type valves. ultiple valve station manifolds (V o-ordinates) for the mounting of several valves are also available. See page 4. or sub-plates to mount plug-in solenoids, consult factory. SI-PORT SU-PTS (S STTION TYP) OR OUR-WY VVS OTTO PORT X X X X N (5 OS) P (NPT - 5 OS) Q (N TR - 3 OS) R (SOT P SRWS RN - 2 OS) N (5 OS) P (NPT - 5 OS) Q (N TR - 3 OS) R (SOT P SRWS RN - 2 OS) SU-PT PROUT NURS *Product numbers shown provide NPT ports. or ports with thread add Suffix-2. VV SIZ Side Ported ottom Ported /8 /4 3/8 /2 3/4 /4 /4 in mm in mm in mm in mm in mm in mm in mm in mm See note below See note below N * P /8 NPT /4 NPT 3/8 NPT /2 NPT 3/4 NPT NPT /4 NPT /4 NPT Q /4 N /4 N 5/6 N 5/6 N 3/8 N 3/8 N 3/8 N 3/8 N R onsult factory for mounting hole and bottom port locations.

41 3 2 2 V O-ORTS 4-WY Section 2 & 3-STTION OR OUR-WY VVS TWO-WY N TR-WY valves may be intermixed on the same manifold. (4 or more valve stations can be provided by joining multiples of the 2 or 3-station) P X X X X X X X X X X X X X X X X X X P X P nd View V (4 OUNT OS PR PT) Top View 2-STTION SU-PT ottom View 3-STTION SU-PT Side View N leed ontrol or Pilot anifold dapter plates are available. onsult factory. rawing ey N P V W or ¼ Valves or ½ Valves 4 (02) 6 (52) 2 (5) 3 (76) 0.66 (7) (25).3 (33) 2 (5) 2 (5) 3 (76) INSIONS (25).5 (38).63 (4) 2 (5).25 (25.6) 3 (76) ey letters - refer to sizes common to both 2 and 3-Station o-ordinates 0.34 (9) 0.5 (3) 7.5 (9) 0 (254) 6.88 (75) 9.38 (238) 3-Station o-ordinates only 5.38 (37) 7 (78) 4.75 (2) 6.38 (62) 2-Station o-ordinates only Valve Size ommon Port sizes. OW TO ORR O-ORTS Product numbers shown are for o-ordinates only. Valves and accessories are ordered separately. or help in specifying required valves refer to pages 2 and 3. When Two-Way and/or Three-Way valves are to be mounted on the same manifold, a PU is required for each of the unused exhaust ports and cylinder ports on the mounting face of the o-ordinate. These plugs are assembled, but must be ordered separately as follows: V-P-43 for /4 size valves; V-P-45 for /2 size. Inches (mm) Valve Size NPT o-ordinate Product No. /4" V-433-** /2" V-453-** ** Insert No. of valve mounting stations required. xample: 7 station o-ordinate for /2 Valves is V with NPT threads. SSORIS /4" /2" leed ontrol dapter V--43 V--45 Pilot anifold dapter V-P-43 V-P-45 leed ontrol & Pilot anifold dapter V V Station lank S-43 S-45 xhaust ombiner dapter V--43 V--45 Required to block and protect any unused or future valve mounting stations. 4

42 WY VVS 5/2 and 5/3 ive-way Valves are actually dual-pressure our-way Valves. Two separate inlets generally are used to control a double acting cylinder so that one pressure is used to direct the work stroke of the cylinder and the other pressure is used to return the cylinder. NO PRSSUR RN (onsult pressure rating chart on Page 6 for specific pressure rating of each valve.) Series V : partial vacuum to 200 psi (4 bar) pneumatic Series T : psi (35 bar) hydraulic TUTION NU, NI, PIOT or SONOI-PIOT OY TYPS: ll Series V & T ive-way Valves are available in the two body types described below. ctuators used with either body type are completely interchangeable. SI-PORT The side-ported body provides threaded ports in the body of the valve. SU-PT OUNT The Sub-plate mounting valve is shown mounted on an individual sub-plate. See page 48 for details on the sub-plate. PORT SIZS: /8, /4, 3/8, /2, 3/4, and NPT /8, /4, 3/8, and /2 PORT SIZS: /8, /4, 3/8, /2, 3/4,, -/4 NPT and 42

43 5-WY Section SPIITIONS Refer to pages 3 through for information concerning: onstruction Seals Port Sizes low Pressure Ranges lectrical Temperature iltration & ubrication STNR OW PTTRNS TWO T, TWO OUTTS, ON XUST Valves must be connected in accordance with the port markings so that the flow is from the inlet port to the outlet port or from outlet port to exhaust.. The flow within the valve should never be reversed. Note: When used in a vacuum system, the vacuum pump is connected to the outlet port TWO POSITION 5/2 RT. T. P X P P X P P P P inlet open to cylinder port ; cylinder port open to exhaust P inlet open to cylinder port ; cylinder port open to exhaust 3 POSITION 5/3 iagrams below show center position only. Offset positions are same as shown above for 2-position types. To indicate particular center pattern required, substitute number shown within corresponding diagram for fourth digit of product number. 3 4 ll ports blocked ylinder ports open to exhaust. 8 9 Inlet open to both cylinder ports. ll ports open. 43

44 WY-OUNT INSIONS Port hole locations and mounting hole size and locations shown in the individual ody etail below apply to all ive-way valves, regardless of type of actuation. The overall dimensions shown for each type of valve actuation apply whether for side ported or sub-plate mounting type. OY TI SIPORT SUPT OUNT (See page 48 for sub-plate details) P X P ounting oles (3) (ounting oles 3) (5 OS OR OR S) SIZ Ø Ø in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/4 SI PORT or SU-PT OUNT /8-/2 SI PORT o SU-PT OUNT /4- SI PORT or SU-PT OUNT /4 SI PORT or SU-PT OUNT N TUT VVS Ø N OST VR TYP /* * N Ø SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / *imensions for Spring-entering Valves NTR VR TYP 24 4 (02) /8 thru /2 valves /*.03 (26).63 (4) 3/4 thru /4 valves * SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / / *imensions for Spring-entering Valves ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports. 44

45 5-WY Section UTTON TUT VVS X PN O Ø TRV Ø /* X * SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4-/ *imensions for Spring-entering Valves OOT TUT VVS/P and TR S V S P R T W U /* * P R S T U V W SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / *imensions for Spring-entering Valves TUT VVS NOR UTY N Ø ROR OTION N SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / VY UTY N Ø ROR U OPN TRV* N SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ *aximum Permissible Over-Travel /4 (6.4mm) Refer to page 44 under ody etail, for port and mounting hole locations for all valves shown above. 45

46 WY-OUNT INSIONS PIOT TUT VVS S PIOT ⅛ NPT PIOT PORT OR ⅛ TRU ½ ONY OTION of ⅛ NPT PIOT PORT on ¾ & ¼ ONY OU PIOT /* /* /* /* ⅛ NPT PIOT PORT OR ⅛ TRU ½ ONY OTION of ⅛ NPT PIOT PORT on ¾ & ¼ ONY * * SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ *imensions for Spring-entering Valves IPR TUT VVS S IPR /4"NPT PIOT PORT SOWN WIT OPTION SPRS (SPIY Y SUIX -) OU IPR /4"NPT PIOT PORT /* /* SOWN WIT OPTION SPRS (SPIY Y SUIX -) * SIZ in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ / / *imensions for Spring-entering Valves Refer to page 44 under ody etail, for port and mounting hole locations for all valves shown above. ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports 46

47 U.S../ N U.S../ N 5-WY Section SONOI TUT VVS/ (Non azardous Service) S SONOI ⅛ NPT PU OR XPIOT PORT (25).75 (9) NU OVRRI (OPTION) ½ NPT ONUIT ONNTION ¼ PTR (OPTION - S NOT OW) OU SONOI.75 (9) (25) ⅛ NPT PU OR XPIOT PORT.75 (25) (9) /* NU OVRRI ½ NPT ONUIT ONNTION (OPTION) /* ½ NPT ONUIT ONNTION ¼ PTR (OPTION - S NOT OW) * SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ *imensions for Spring-entering Valves NOT: dapter is supplied when specified, by adding suffix - to product number SONOI TUT VVS/UPRIT (Non azardous Service Valves. or hazardous service valves see Page 9 -.) S SONOI ¼ PTR (OPTION - S NOT OW) 0.75 (9 mm) X ½ NPT ONUIT ONNTION X X ⅛ NPT XPIOT PORT OR ⅛ TRU ½ ONY 0.4 (0 mm) VRS R ⅛ NPT XPIOT PORT OR ¾ & ¼ ONY.375 (35 mm) NU OVRRI (OPTION) OU SONOI ¼ PTR (OPTION - S NOT OW) X 0.75 (9 mm) ⅛ NPT XPIOT PORT OR ⅛ TRU ½ ONY ½ NPT ONUIT ONNTION 0.4 (0 mm) /* /* 0.4 (0 mm) /* /* X ⅛ NPT XPIOT PORT OR ⅛ TRU ½ ONY VRS R ⅛ NPT XPIOT PORT OR ¾ & ¼ ONY.375 (35 mm) NU OVRRI (OPTION) * * X SIZ in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm /8-/ /8-/ /4--¼ *imensions for Spring-entering Valves NOT: dapter is supplied when specified, by adding suffix - to product number Refer to page 44 under ody etail, for port and mounting hole locations for all valves shown above. ¼ size valve has internal capacity of ¼ (32mm) diameter. Sideported valves have NPT ports; subplate for subplate mounting style has ¼ NPT ports. 47

48 Will mount series V or T sub-plate type valves. ultiple valve station manifolds (V o-ordinates) for the mounting of several valves are also available. See page 49. or sub-plates to mount plug-in solenoids, consult factory. OR IV-WY VVS SI-PORT SU-PTS (S STTION TYP) OTTO PORT P X P P X P N (5 OS) P (NPT - 5 OS) Q (N TR - 3 OS) R (SOT P SRWS RN - 2 OS) N (5 OS) P (NPT - 5 OS) Q (N TR - 3 OS) R (SOT P SRWS RN - 2 OS) SU-PT PROUT NURS *Product numbers shown provide NPT ports. or ports with thread add Suffix-2. VV SIZ Side Ported ottom Ported /8 /4 3/8 /2 3/4 /4 /4 in mm in mm in mm in mm in mm in mm in mm in mm See note below See note below N *P /8 NPT /4 NPT 3/8 NPT /2 NPT 3/4 NPT NPT /4 NPT /4 NPT Q /4 N 4 N 5/6 N 5/6 N 3/8 N 3/8 N 3/8 N 3/8 N R onsult factory for mounting hole and bottom port locations.

49 WY Section V O-ORTS 2 & 3-STTION OR IV-WY VVS (4 or more valve stations can be provided by joining multiples of the 2 or 3-station) P P X P P X P P X P P X P P X P P X P P X P P X P P X P P X P nd View P V (4 OUNT OS PR PT) Top View 2-STTION SU-PT ottom View 3-STTION SU-PT Side View N Pilot anifold dapter plates are available for mounting pilot valves with manifold mounted pilot ports. onsult factory. rawing ey N P V W or ¼ Valves or ½ Valves 4 (02) 6 (52) 2 (5) 3 (76) 0.66 (7) (25).3 (33) 2 (5) 2 (5) 3 (76) INSIONS (25).5 (38).63 (4) 2 (5) 2.25 (54) 3 (76) 0.5 (3) 0.75 (9) ey letters - refer to sizes common to both 2 and 3-Station o-ordinates Inches (mm) 0.34 (9) 0.5 (3) 7.5 (9) 0 (254) OW TO ORR O-ORTS 6.88 (75) 9.38 (238) 3-Station o-ordinates only 5.38 (37) 7 (78) 4.75 (2) 6.38 (62) 2-Station o-ordinates only ommon Port sizes. Product numbers shown are for o-ordinates only. Valves and accessories are ordered separately. or help in specifying required valves refer to pages 2 and 3. Valve Size NPT o-ordinate Product No. /4 V-533-** /2 V-553-** Valve Size SSORIS /4" /2" Pilot anifold dapter V-P-43 V-P-45 Station lank S-43 S-45 ** Insert No. of valve mounting stations required. xample: 7 station o-ordinate for /4 Valves is V with NPT threads. Required to block and protect any unused or future valve mounting stations. 49

50 PRTS IST/OY SSY The same ody ssembly is used for both normally open and normally closed valves. The determinant for normally closed and normally open is the location of the actuator in respect to the right and left end of the ody ssembly (when facing the inlet port). If the actuator is to the left the valve is normally open and if to the right the valve is normally closed. (TWO-WY VVS) ⅛ N ¼ PORT SIZS ody ssembly Numbers are for V Series valves. or T Series, place the letter T in front of no. shown: i.e TS ⅛ OY SSY S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) ¼ OY SSY S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) pprox. Weight =. lbs. (0.50 kg) N PRT N PRT NUR /8 /4 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 23-0* One ody (Sub-plate tg. Pilot)* 233-0* One Plunger One O Ring P One O Ring P One ushing One O Ring P Two asket Two lange One Retainer One *Two P O Rings required for port gaskets on Sub-plate ounting. Part No. for T Series changes to T ⅜ N ½ PORT SIZS ⅜ OY SSY S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) ½ OY SSY S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) pprox. Weight = 2.77 lbs. (.26 kg) N PRT N PRT NUR 3/8 /2 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One δ ody (Sub-plate tg. XPilot)* 25-0* One δ ody (Sub-plate tg. Pilot)* 253-0* One Plunger One Retainer One O Ring P One ushing One O Ring P Two earing One O Ring P Two O Ring P-00-0 One * Two P-00-3 O Rings required for port gaskets on Sub-plate ounting. Part No. for T Series changes to T δ Subplate mounting style bodies & body assemblies utilized with Treadle ctuators require addition of Suffix to part, subassembly and complete product number. ¾, N ¼ PORT SIZS ¾ OY SSY S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) OY SSY S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) pprox. Weight = 7.35 lbs. (3.33 kg) (or ¼ Valve ody ssemblies, add suffix detail -2 to corresponding Sub-assembly No. shown for valve.) N PRT N PRT NUR 3/4 ¼ UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 27-0* * One ody (Sub-plate tg. Pilot)* 273-0* * One Plunger One O Ring P P One ushing One O Ring P P Two Retainer One O Ring P P Two earing One O Ring P-00-7 P One * Two P-00-2 O Rings required for port gaskets on Sub-plate ounting for valve and two P O Rings for ¼ valve. Part No. for T Series changes to T or use with and ever ap () add suffix -28 for 3/4 or size, Suffix -2 for ¼ size. 50

51 PRTS IST/OY SSY The same ody ssembly is used for both normally open and normally closed valves. The determinant for normally closed and normally open is the location of the actuator in respect to the right and left end of the ody ssembly (when facing the inlet port). If the actuator is to the left the valve is normally open and if to the right the valve is normally closed. ody ssembly Numbers are for V Series valves. or T Series, place the letter T in front of no. shown: i.e TS (TR-WY VVS) ⅛ N ¼ PORT SIZS ⅛ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot)) ¼ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) pprox. Weight =.2 lbs. (0.5 kg) X N PRT N PRT NUR /8 /4 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 33-0* One ody (Sub-plate tg. Pilot)* 333-0* One Plunger One O Ring P One O Ring P Two ushing One O Ring P One O Ring P Two asket Two lange One Retainer One *Three P O Rings required for port gaskets on Sub-plate ounting. Part No. for T Series changes to T Part No. for T Series changes to T ⅜ N ½ PORT SIZS ⅜ OY SSY** (2 position) S (Side Ports XPpilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) ½ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) pprox. Weight = 2.93 lbs. (.33 kg) X N PRT N PRT NUR 3/8 /2 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One δ ody (Sub-plate tg. XPilot)* 35-0* One δ ody (Sub-plate tg. Pilot)* 353-0* One Plunger One Retainer One O Ring P-00-3 One ushing One O Ring P Two O Ring P-00-0 One earing One O Ring P Two O Ring P Two * Three P-00-3 O Rings required for port gaskets on Sub-plate ounting. Part No. for T Series changes to T Part No. for T Series changes to T δ Subplate mounting style bodies & body assemblies utilized with Treadle ctuators require addition of Suffix to part, subassembly and complete product number. ¾, N ¼ PORT SIZS ¾ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) pprox. Weight = 7.65 lbs. (3.47 kg) (or ¼ Valve ody ssemblies, add suffix detail -2 to corresponding Sub-assembly No. shown for valve.) N PRT N PRT NUR 3/4 ¼ UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 37-0* * One ody (Sub-plate tg. Pilot)* 373-0* * One Plunger One O Ring P P Two ushing One O Ring P-00-2 P One O Ring P P Two Retainer One O Ring P P Two earing One O Ring P-00-7 P One * Three P-00-2 O Rings required for port gaskets on Sub-plate ounting for valve and three P O Rings for ¼ valve. Part No. for T Series changes to T and T or use with and ever ap () add suffix -28 for 3/4 or size, Suffix -2 for ¼ size. ** or 3-position ody ssemblies with all ports blocked in neutral or center position, the only part that changes is the plunger. To indicate the 3-position plunger or ody ssembly, substitute the number 3 for the fourth digit of the part number shown. or example: is the 3-position plunger; S is the 3-position ody ssembly. X 5

52 PRTS IST/OY SSY (TWO-T VVS) ody ssembly Numbers are for V Series valves. or T Series, place the letter T in front of no. shown: i.e TS ⅛ N ¼ PORT SIZS ⅛ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) ¼ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) OUT pprox. Weight =.2 lbs. (0.5 kg) N PRT N PRT NUR /8 /4 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 83-0* One ody (Sub-plate tg. Pilot)* 833-0* One Plunger One asket Two O Ring P Two Retainer One O Ring P Two O Ring P Two ushing One lange One * *Two P O Rings required for port gaskets on Sub-plate ounting. Part No. for T Series changes to T ⅜ N ½ PORT SIZS ⅜ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) ½ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) OUT pprox. Weight = 2.93 lbs. (.33 kg) P P N PRT N PRT NUR 3/8 /2 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One δ ody (Sub-plate tg. XPilot)* 85-0* One δ ody (Sub-plate tg. Pilot)* 853-0* One Plunger One O Ring P Two O Ring P-00-0 Two Retainer One O Ring P-00-0 Two O Ring P Two ushing One ushing One * Three P-00-3 O Rings required for port gaskets on Sub-plate ounting. Part No. for T Series changes to T δ Subplate mounting style bodies & body assemblies utilized with Treadle ctuators require addition of Suffix to part, subassembly and complete product number. ¾, N ¼ PORT SIZS ¾ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) OUT pprox. Weight = 7.65 lbs. (3.47 kg) P P (or ¼ Valve ody ssemblies, add suffix detail -2 to corresponding Sub-assembly No. shown for valve.) N PRT N PRT NUR 3/4 ¼ UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 87-0* * One ody (Sub-plate tg. Pilot)* 873-0* * One Plunger One O Ring P P Two O Ring P P Two Retainer One O Ring P P Two O Ring P P Two ushing One earing One * Three P-00-2 O Rings required for port gaskets on Sub-plate ounting for valve and three P O Rings for ¼ valve. Part No. for T Series changes to T or use with and ever ap () add suffix -28 for 3/4 or size, Suffix -2 for ¼ size. ** or 3-position ody ssemblies with all ports blocked in neutral or center position, the only part that changes is the plunger. To indicate the 3-position plunger or ody ssembly, substitute the number 3 for the fourth digit of the part number shown. or example: is the 3-position plunger; S is the 3-position ody ssembly. 52

53 PRTS IST/OY SSY ody ssembly Numbers are for V Series valves. or T Series, place the letter T in front of no. shown: i.e TS (TWO-OUTT VVS) ⅛ N ¼ PORT SIZS ⅛ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) ¼ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) pprox. Weight =.2 lbs. (0.5 kg) OUT OUT N PRT N PRT NUR /8 /4 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 73-0* One ody (Sub-plate tg. Pilot)* 733-0* One Plunger One asket Two O Ring P Two Retainer Two O Ring P Two O Ring P Two ushing One * *Two P O Rings required for port gaskets on Sub-plate ounting. Part No. for T Series changes to T ⅜ N ½ PORT SIZS ⅜ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) ½ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) pprox. Weight = 2.93 lbs. (.33 kg) OUT OUT N PRT N PRT NUR 3/8 /2 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One δ ody (Sub-plate tg. XPilot)* 75-0* One δ ody (Sub-plate tg. Pilot)* 753-0* One Plunger One O Ring P Two O Ring P-00-0 Two Retainer Two O Ring P-00-3 Two O Ring P Two ushing One * Three P-00-3 O Rings required for port gaskets on Sub-plate ounting. Part No. for T Series changes to T δ Subplate mounting style bodies & body assemblies utilized with Treadle ctuators require addition of Suffix to part, subassembly and complete product number. ¾, N ¼ PORT SIZS ¾ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot)) OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S pprox. Weight = 7.65 lbs. (Sub-plate tg. Pilot) (3.47 kg) or use with and ever ap () add suffix -28 for 3/4 or size, Suffix -2 for ¼ size. OUT OUT (or ¼ Valve ody ssemblies, add suffix detail -2 to corresponding Sub-assembly No. shown for valve.) N PRT N PRT NUR 3/4 ¼ UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 77-0* * One ody (Sub-plate tg. Pilot)* 773-0* * One Plunger One O Ring P P Two O Ring P P Two Retainer ** O Ring P-00-2 P Two O Ring P P Two ushing One earing None One * Three P-00-2 O Rings required for port gaskets on Sub-plate ounting for valve and three P O Rings for ¼ valve. ** Two required for 3/4 and sizes. One required for ¼. Part No. for T Series changes to T or use with and ever ap () add suffix -28 for 3/4 or size, Suffix -2 for ¼ size. ** or 3-position ody ssemblies with all ports blocked in neutral or center position, the only part that changes is the plunger. To indicate the 3-position plunger or ody ssembly, substitute the number 3 for the fourth digit of the part number shown. or example: is the 3-position plunger; S is the 3-position ody ssembly. 53

54 PRTS IST/OY SSY (OUR-WY VVS) ody ssembly Numbers are for V Series valves. or T Series, place the letter T in front of no. shown: i.e TS ⅛ N ¼ PORT SIZS ⅛ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) ¼ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) pprox. Weight =.70 lbs. (0.77 kg) X X N PRT N PRT NUR /8 /4 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 432-0* One ody (Sub-plate tg. Pilot)* * One Plunger One O Ring P Two O Ring P our ushing Two O Ring P Two O Ring P Two asket Two Retainer Two * ive P O Rings required for port gaskets on Sub-plate ounting. Part No. for T Series changes to T Part No. for T Series changes to T ⅜ N ½ PORT SIZS ⅜ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) ½ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) pprox. Weight = 4.25 lbs. (.93 kg) N PRT N PRT NUR 3/8 /2 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One δ ody (Sub-plate tg. XPilot)* 452-0* One δ ody (Sub-plate tg. Pilot)* * One Plunger One ushing Two O Ring P our O Ring P-00-0 Two O Ring P-00-3 Two Retainer Two O Ring P Two O Ring P Two * ive P-00-3 O Rings required for port gaskets on Sub-plate ounting. Part No. for T Series changes to T Part No. for T Series changes to T δ Subplate mounting style bodies & body assemblies utilized with Treadle ctuators require addition of Suffix to part, subassembly and complete product number. ¾, N ¼ PORT SIZS ¾ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot)) OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) pprox. Weight =.4 lbs. (5.7 kg) N PRT N 54 X X (or ¼ Valve ody ssemblies, add suffix detail -2 to corresponding Sub-assembly No. shown for valve.) PRT NUR 3/4 ¼ UNITS RQ. ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 472-0* * One ody (Sub-plate tg. Pilot)* * * One Plunger One O Ring P P our ushing Two O Ring P-00-7 P Two O Ring P-00-2 P Two Retainer Two O Ring P P Two O Ring P P Two * ive P-00-2 O Rings required for port gaskets on Sub-plate ounting for valve and five P O Rings for ¼ valve. Part No. for T Series changes to T and T or use with and ever ap () add suffix -28 for ¾ or size, Suffix -2 for ¼ size. ** or 3-position ody ssemblies, the only part that changes is the plunger. There are 4 common plungers available, each one providing a different flow pattern. These flow patterns are illustrated on Page 35 (for other plunger configuration contact factory). ach flow pattern has its own number. To order the correct ody ssembly or Plunger, refer to Page 35. Substitute the proper flow pattern number for the fourth digit of either the ody ssembly or Plunger number. or xample: If you require low Pattern No. 3, the /8 ody ssembly number would be S The Plunger would be

55 PRTS IST/OY SSY NOT: Port markings P and P have no significance other than to distinguish two separate inlet ports. PIOT models have internal pilot supply from the P port, therefore the inlet pressure at this port should be within the minimum and maximum pilot pressures recommended for that particular valve. ody assembly numbers are for V series valves. or T series parts list, consult factory (IV-WY VVS) ⅛ N ¼ PORT SIZS ⅛ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) ¼ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) P X P pprox. Weight =.7 lbs. (0.77 kg) N PRT N PRT NUR /8 /4 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 532-0* One ody (Sub-plate tg. Pilot)* * One Plunger One O Ring P Two O Ring P our ushing Two O Ring P Two Retainer Two asket Two O Ring P Two * ive P O Rings required for port gaskets on Sub-plate ounting. ⅜ N ½ PORT SIZS ⅜ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) ½ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) δ S (Sub-plate tg. XPilot) δ S (Sub-plate tg. Pilot) pprox. Weight = 4.25 lbs. (.93 kg) N PRT N PRT NUR 3/8 /2 UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One δ ody (Sub-plate tg. XPilot)* 552-0* One δ ody (Sub-plate tg. Pilot)* * One Plunger One O Ring P-00-0 Two O Ring P our ushing Two O Ring P-00-3 Two Retainer Two O Ring P Two O Ring P Two * ive P-00-3 O Rings required for port gaskets on Sub-plate ounting. δ Subplate mounting style bodies & body assemblies utilized with Treadle ctuators require addition of Suffix to part, subassembly and complete product number. ¾, N ¼ PORT SIZS ¾ OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot)) OY SSY** (2 position) S (Side Ports XPilot) S (Side Ports Pilot) S (Sub-plate tg. XPilot) S (Sub-plate tg. Pilot) pprox. Weight =.4 lbs. (5.7 kg) P P X (or ¼ Valve ody ssemblies, add suffix detail -2 to corresponding Sub-assembly No. shown for valve.) N PRT N PRT NUR 3/4 ¼ UNITS RQUIR ody (Side Ports XPilot) One ody (Side Ports Pilot) One ody (Sub-plate tg. XPilot)* 572-0* * One ody (Sub-plate tg. Pilot)* * * One Plunger One O Ring P-00-7 P Two O Ring P P our ushing Two O Ring P-00-2 P Two Retainer Two O Ring P P Two O Ring P P Two * ive P-00-2 O Rings required for port gaskets on Sub-plate ounting for valve and five P O Rings for ¼ valve. or use with and ever ap () add suffix -28 for ¾ or size, Suffix -2 for ¼ size. ** or 3-position ody ssemblies, the only part that changes is the plunger. There are 4 common plungers available, each one providing a different flow pattern. These flow patterns are illustrated on Page 35 (for other plunger configuration contact factory). ach flow pattern has its own number. To order the correct ody ssembly or Plunger, refer to page 43. Substitute the proper flow pattern number for the fourth digit of either the ody ssembly or Plunger number. or xample: If you require low Pattern No. 3, the /8 ody ssembly number would be S The Plunger would be

56 PRTS IST/TUTORS SONOI P SSY (inline type) / all sizes (Non azardous Service) designated by prefix letter in complete product number S (XPilot) S (Pilot) or /8 thru /2 valves 24" (60 mm) S 24" (60 ) ROUN (RN) S (XPilot) S (Pilot) or ¾ and valves 24" (60 mm) S 24" (60 ) ROUN (RN) /2" NPT ONUIT ONNTION /2" NPT ONUIT ONNTION S U P T N S R U S (XPilot) S (Pilot) or ¼ valves R T N pprox. Weight =.76 lbs. (0.80 kg) pprox. Weight = 3.00 lbs. (.36 kg) N PRT N PRT NUR /8 thru /2 3/4, and ¼ UNITS RQ Solenoid ap (Pilot) One Solenoid ap (XPilot) One Spring P P One Piston * One Plunger P P One Sleeve P P One asket P P One /8 NPT Plug (Pilot) P P One /8 NPT Plug (XPilot) NON NON None oil (Specify oil ode) P P One Washer P P One over P P One Washer NON One O Ring P P One N Screw PS PS our P Washer NON One R dapter (ydraulic) P-002- P-002- One S Nut P P One T Plate P P One U rommet (Pilot) ** rommet (XPilot) ** *Piston part no. for ¼ size is **Two required for ⅛ thru ½ sizes. One required for ¾,, and ¼ sizes. dapter R for piping solenoid discharge is supplied only if specified. dapter is required when pilot medium is liquid. Specify on complete Valve or Sub-ssembly by using Suffix - when ordering. SONOI P SSY (upright type) / all sizes *(Non azardous Service) designated by prefix letter and suffix letter U in complete product number S U (XPilot) S U (Pilot) or /8 thru /2 valves R T S U (XPilot) S U (Pilot) or ¾ and valves R T 24" (60 mm) S S S pprox. Weight =.90 lbs. U (0.86 kg) S U-2 (XPilot) S U-2 (Pilot) or ¼ valves N P 24" (60 mm) S 24" (60 ) ROUN (RN) /2" NPT ONUIT ONNTION 24" (60 ) ROUN (RN) /2" NPT ONUIT ONNTION N PRT N PRT NUR /8 thru /2 3/4, and /4 UNITS RQ Solenoid ap (Pilot) U U One Solenoid ap (XPilot) U U One Spring P P One Piston * One Plunger P P One Sleeve P P One asket P P One /8 NPT Plug (Pilot) NON P One /8 NPT Plug (XPilot) P NON One oil (Specify oil ode) P P One Washer P P One over P P One O Ring P P One N Screw PS PS our P Washer NON One R dapter (ydraulic) P-002- P-002- One S Nut P P One T Plate P P One U rommet (Pilot) Two rommet (XPilot) Two N *Piston part no. for ¼ size is U pprox. Weight = 3.00 lbs. (.36 kg) dapter R for piping solenoid discharge is supplied only if specified. dapter is required when pilot medium is liquid. Specify on complete Valve or Sub-ssembly by using Suffix - when ordering. NU OVRRI - Several types of manual overrides are available for use with solenoid actuators. ost parts listed above for specific actuators remain the same except for part (solenoid cap) and parts for the specific override. onsult factory for correct part numbers. *SONOI OPRTOR OR ZROUS OTIONS - In many cases parts remain the same except for electrical operator. In order for unit to retain approvals and certifications it must be assembled and tested at the factory. actory should be consulted for replacement parts. 56

57 PRTS IST/TUTORS SONOI SPR-NTR P SSY (inline type) / all sizes (Non azardous Service) S (XPilot) S (Pilot) or /8 thru /2 valves S (XPilot) S (Pilot) or ¾ and valves V pprox. Weight = 2.8 lbs. (0.99 kg) S (XPilot) S (Pilot) or ¼ valves pprox. Weight = 4.90 lbs. (2.22 kg) N N PRT N PRT NUR /8 thru /2 3/4, and /4 UNITS RQ Solenoid ap (Pilot) U U One Solenoid ap (XPilot) U U One Spring One Piston * One Plunger P P One Sleeve P P One asket P P One oil (Specify oil ode) P P One Washer P P One over P P One Washer** ** ** ** O Ring P P One Screw PS PS our N Plug (Pilot) P P One Plug (XPilot) NON NON None P dapter (ydraulic) P-002- P-002- One R Nut P P One S Plate P P One T Spring up * One U Pin One V W PRT N PRT NUR /8 thru /2 3/4, and /4 UNITS RQ Solenoid ap (Pilot) One Solenoid ap (XPilot) One Spring One Piston * One Plunger P P One Sleeve P P One asket P P One oil (Specify oil ode) P P One Washer P P One over P P One Washer** ** ** ** O Ring P P One Screw PS PS our N Plug (Pilot) P P One Plug (XPilot) NON NON None P dapter (ydraulic) P-002- P-002- One R Nut P P One S Plate P P One T Spring up * One U Pin One V W Spacer (Pilot) One Spacer (XPilot) One rommet (Pilot) *** rommet (XPilot) *** X Solenoid Ring NON One Y Spring P P One SONOI SPR-NTR P SSY (upright type) / all sizes *(Non azardous Service) S U (XPilot) S U (Pilot) or /8 thru /2 valves P S N 24" (60 mm) S S U (XPilot) S U (Pilot) or ¾ and valves S N 24" (60 mm) S 24" (60 ) ROUN /2" NPT ONUIT ONNTION /2" NPT ONUIT ONNTION W 24" (60 ) ROUN (RN) S Y N T U 24" (60 mm) S N W W R P R Y W T /4" NPT PIOT XUST PORT U U 24" (60 ) ROUN (RN) /2" NPT ONUIT ONNTION Y P R S Y V T pprox. Weight = 2.32 lbs. V W (.05 kg) S U-2 (XPilot) S U-2 (Pilot) or ¼ valves 24" (60 mm) S T P R X 24" (60 ) ROUN (RN) /2" NPT ONUIT ONNTION designated by prefix letter X in complete product number * or ¼ size Piston part no. is , Spring up part no. is ** Two required for ⅛ thru ½ sizes. One required for ¾ &. None for ¼. ***our required for ⅛ thru ½ sizes. Two required for ¾, and ¼ sizes. dapter P for piping solenoid discharge is supplied only if specified. Specify on complete Valve or Sub-ssembly by using Suffix - when ordering. designated by prefix letter X and suffix letter U in complete product number Spacer (Pilot) One Spacer (XPilot) One rommet (Pilot) *** rommet (XPilot) *** Y Spring P P One W V U W pprox. Weight = 4.90 lbs. (2.2 kg) * or ¼ size Piston part no. is , Spring up part no. is ** Two required for ⅛ thru ½ sizes. One required for ¾ &. None for ¼. ***our required for ⅛ thru ½ sizes. Two required for ¾, and ¼ sizes. dapter P for piping solenoid discharge is supplied only if specified. Specify on complete Valve or Sub-ssembly by using Suffix - when ordering. OR NU OVRRI OR *SONOI OPRTOR OR ZROUS OTIONS } See bottom of page 56 for notes. 57

58 PRTS IST/TUTORS N P SSY (offset mounted) / /8 thru only designated by prefix letter in complete product number S S or ⅛ thru ½ valves or ¾ and valves N PRT N PRT NUR UNITS RQ /8 thru /2 3/4 and Tumbler ap One Tumbler One Screw PS PS Two Pin One andle One Screw PS PS One lamp One all P P-00-0 One Screw PS PS Two pprox. Weight = 0.72 lbs. (0.33 kg) pprox. Weight = 2.20 lbs. (.00 kg) N VR P SSY (centerline mounted) / all sizes S or ⅛ thru ½ valves N PRT N UTTON P SSY / ⅛ thur only S pprox. Weight = 0.80 lbs. (0.36 kg) or ⅛ thru ½ valves S or ¾ and valves S or ¼ valves N pprox. Weight =.50 lbs kg) S or ¾ and valves designated by prefix letter in complete product number PRT NUR /8 thru /2 3/4 and * /4 UNITS RQ ever ap One nuckle NON NON One racket NON One land oot NON NON One ilter NON One O Ring P-00-3 P P One Screw NON NON One Pin NON One andle One nob P-00-0 P-00-0 P-00-0 One Screw PS PS PS our Washer NON NON One ink ssembly One lip NON NON One Screw (Not Shown) NON PSS PSS One N Rod NON NON One *pplicable to all 3/4 and sizes, but ody ssembly used must be made to Suffix option -28. designated by prefix letter I in complete product number. pprox. Weight = 0.5 lbs. (0.23 kg) pprox. Weight =.0 lbs. (0.45 kg) N PRT N PRT NUR /8 thru /2 3/4 and UNITS RQ id nob One Rod One Pin One utton ap P P One Screw PS PS our Washer One ocking Nut One Washer NON One 58

59 PRTS IST/TUTORS P SSY / ⅛ thur only designated by prefix letter in complete product number. S S or ⅛ thru ½ valves or ¾ and valves N PRT N PRT NUR /8 thru /2 3/4 and UNITS RQUIR am ap One Yoke One Roller One Pin One Screw PS PS our Washer None One pprox. Weight = 0.45 lbs. (0.20 kg) pprox. Weight = 2.0 lbs. (0.9 kg) P SSY(heavy duty) ⅛ thur ½ only with ¼ overtravel S S or ⅛ thru ½ valves pprox. Weight =.00 lbs. (0.45 kg) designated by prefix letter and suffix -8S in complete product number. N PRT N PRT NUR /8 thru /2 UNITS RQUIR am ap One Spring S One Screw PS our Pin One Roller One Yoke One Spring lip One Spring up One Washer One Pin One OOT P SSY (treadle and pedal) ⅛ thru only S (Pedal) S (Treadle) or ⅛ thru ½ valves pprox. Weight Pedal =.04 lbs (0.47 kg) Treadle =.3 lbs. (0.5 kg) S (Pedal) S (Treadle) or ¾ and valves RT P SSY / ⅛ thur only or ⅛ thru ½ valves O VV PUNR pprox. Weight ⅛ thru ½ = 0.20 lbs. (0.09 kg) ¾ and = 0.50 lbs. (0.23 kg) pprox. Weight Pedal = 3.05 lbs. (.38 kg) Treadle = 3.0 lbs. (.4 kg) or ¾ and valves O VV PUNR Pedal ap is designated by prefix letter in complete product number. Treadle ap is designated by prefix letter T in complete product number. PRT PRT NUR UNITS N N /8 thru /2 3/4 and RQUIR Tumbler ap One N Pedal* * * One Treadle* * * One Screw PSS PSS Two Pin One Tumbler One Pin One utton Two Screw PS PS Two Screw PS PS Two designated by prefix letter and suffix number -33 in complete product number. PRT N * these parts are interchangeable within the same valve size. PRT NUR UNITS RQUIR /8 thru /2 3/4 and Retaining ap One Screw PS PS our The RT P SSY is used when it is necessary for the valve plunger to extend thru the end of the valve. n example might be when it is desired to connect two valves in tandem such that one actuator controls two valves. 59

60 PRTS IST/TUTORS PIOT P SSY / all sizes S S **. (Pressure Pilot) (Pressure Pilot) S S ** (leed Pilot) (leed pilot) or ⅛ thru ½ valves or ¾ and valves pprox. Weight = 0.58 lbs. (0.26 kg) pprox. Weight =.70 lbs. (0.77 kg) Pressure pilot (XPilot) is designated by prefix letter P in complete product number. leed pilot (Pilot) is designated by prefix letter P and suffix option - in complete product number. N PRT N PRT NUR /8 thru /2 3/4, and /4 UNITS RQ Pilot ap One leed Pilot ap One O Ring P P One Piston ** One Screw PS PS our Washer NON One rommet* (Not Shown) * * Two *leed Pilot Parts. Two required for ⅛ thru ½ size. One required for ¾ thru ¼ size. **or ¼ size add suffix -2 to part number shown. IRNTI PIOT P SSY / all sizes S (XPilot) S (InPilot) or ⅛ thru ½ valves pprox. Weight = 0.68 lbs. (0.3 kg) S (XPilot)* S (XPilot)* or ¾ and valves pprox. Weight = 2.0 lbs. (0.95 kg) designated by prefix letter in complete product number. N PRT N PRT NUR /8 thru /2 3/4, and /4 UNITS RQ ifferential- Pilot ap One O Ring P-000- P One Piston * One rommet** (Pilot) ** ** ** rommet** (XPilot) ** ** ** Screw PS PS our /8 NPT Plug (Pilot) P P One Washer One *or ¼ size add suffix -2 to part no. shown. **Two required for /8 thru ½ size. One required for ¾,, and ¼ size. None required for ¼ size IPR P SSY/ all sizes S or ⅛ thru ½ valves pprox. Weight =.3 lbs. (0.59 kg) N TNT P SSY / ⅛ thur only S (3 position detent) S (2 position detent) or ⅛ thru ½ valves /4"NPT pprox. Weight =.3 lbs. (0.59 kg) S * or ¾ and valves pprox. Weight = 2.0 lbs. (0.9 kg) S (3 position detent) S (2 position detent) or ¾ and valves \4"NPT pprox. Weight = 2.0 lbs. (0.9 kg) designated by prefix letter W in complete product number. N PRT N PRT NUR /8 thru /2 3/4 and * UNITS RQ Spring ap One PRT N PRT NUR /8 thru /2 3/4 and * /4 Spring lip (Three etent) One Spring lip (Two etent) NON NON None etent (Three Position) One etent (Two Position) One Pin (Three etent) One Pin (Two etent) One O Ring P P One all P * P * * Screw PS PS our age One Washer One *Six required for ⅛ thru ½ size. Twelve required for ¾ and size. UNITS RQ Top Plate N** N N** One Seal P P One Piston One ylinder One ottom Plate NON One Screw PS PS PS our Spacer NON One Washer NON NON One Screw PS PS PS our *or ¼ size add suffix -2-3 to part no. shown. **lso required one P-004- Top Plate O-Ring Seal, IT. Two detent is designated by prefix letter Z in complete product number. Three detent is designated by prefix letter U in complete product number. 60

61 PRTS IST/TUTORS SPR P SSY/ all sizes S S (no spring) or ⅛ thru ½ valves pprox. Weight = 0.48 lbs. (0.22 kg) N SPR-NTR P SSY (manually operated valve) / all sizes S or ⅛ thru ½ valves pprox. Weight = 0.75 lbs. (0.34 kg) N N N PRT N PRT N PIOT SPR-NTR P SSY/ all sizes S or ⅛ thru ½ valves pprox. Weight =.00 lbs. (0.45 kg) S * or ¾ and valves PRT N PRT N PRT NUR /8 thru /2 3/4 and * /4 PRT NUR /8 thru /2 3/4 and * /4 PRT NUR /8 thru /2 3/4 and * /4 PRT NUR /8 thru /2 3/4 and * /4 UNITS RQ Spring ap One Spring Two up Washer One Pin NON One Spring up NON One Spacer NON One Screw PS PS PS our Washer NON One Rod (Not Shown) NON NON One UNITS RQ Pilot ap One Spring One Piston One Pin NON One Washer NON ** UNITS RQ Spring ap One Spring* * * * One Spring up* * * * One Pin* * * NON One Screw PS PS PS our Washer One Washer* NON * NON One O Ring* NON P * NON One *Omit for No Spring ap ssembly. or S , use R **or ¼ size add suffix -2 to part number shown. O Ring P P P One Pilot Spacer One Spring up One Screw PS PS PS our IPR SPR-NTR P SSY/ all sizes S or ⅛ thru ½ valves /4"NPT pprox. Weight =.5 lbs. (0.68 kg) Q S ** S ** (no spring) or ¾ and valves pprox. Weight = 0.60 lbs. (0.27 kg) S * or ¾ and valves pprox. Weight = 2.35 lbs. (.07 kg) pprox. Weight = 3.60 lbs. (.63 kg) S * or ¾ and valves ¼" NPT pprox. Weight = 2.5 lbs. (.3 kg) N P Spring Return designated by prefix letter S in complete product number. No Spring Return designated by prefix letter N in complete product number. designated by prefix letter in complete product number. *or /4 size add suffix -2 to part number shown. designated by prefix letter in complete product number. *or ¼ size add suffix -2 to part number shown. **Two required for ⅛ thru ½ size. One required for ¾, and size designated by prefix letter Y in complete product number. UNITS RQ Top Plate N** N N** One Spring One Piston One Pin NON One ottom Plate NON One ylinder Y One Seal P P One Washer NON One Screw PS PS PS our Spacer NON Y Y One Spring up One Screw PS PS PS our N Spacer NON NON One P O Ring NON P NON One *or ¼ size add suffix -2-3 to part no. shown. **lso requires one P-004- Top Plate O-Ring Seal, IT Q. 6

62 ombination ctuators anual * and ever-two etent ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -3. 2º 2º ombination ctuators are a combining of two actuating devices into one unit that can be applied to either end of a valve body assembly. This allows for a third actuating device to be applied to the opposite end of the valve body assembly. Use of ombination ctuators allows for control of various interlock circuits, and in many cases reduces the total number of valves and overall circuitry required for control of intricate systems. Those combination actuators, shown below, that are indicated with the asterisk symbol * are considered nonstandard as they require body assemblies with extended plungers. If a valve can be re-configured to utilize one of the combination actuators that is not indicated with the asterisk symbol *, standard body assemblies can be utilized. onsult factory for application assistance. ross section drawings and descriptions are presented here for understanding of actuator function. They are indicated in the product number by use of the prefix and the appropriate suffix that represents the specific ombination ctuator involved. * and ever-three etent ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -4. 2º 2º * and ever-spring Return (S) ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail º 2º * and ever-spring enter ( One irection) ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -35 2º 2º * utton-two etent ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -5. * utton-spring Return (S) ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -36. * utton-spring enter (-One irection) ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail

63 R R R ombination ctuators anual (ontinued) * and-two etent ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -3. * and-three etent ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -4. * and-spring enter ( One irection) ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail VRS VRS VRS R * and-spring Return (R) ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -30 iscellaneous Single etent-spring enter ( One irection) ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail VRS Pilot Pilot-Two etent ap ssembly or ⅛ Thru ½ Valves or ¾ & Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -50. iaphragm-two etent ap ssembly or ⅛ Thru ½ Valves or ¾ & Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail

64 ombination ctuators Pilot (continued) Pilot-Spring Return (S) ap ssembly or ⅛ Thru ½ Valves or ¾ & Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -59. iaphragm-spring Return (S) ap ssembly or ⅛ Thru ½ Valves or ¾ & Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -60. * Pilot-Push/Pull ap ssembly P or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -4000P. Pilot-am ap ssembly or ⅛ Thru ½ Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail /8" NPT PIOT PORTS (2) ⅛ PIOT PORT Solenoid/Pilot Solenoid/Pilot-2 etent ap ssembly (XPilot) (Pilot) or ⅛ Thru ½ Valves (XPilot) (Pilot) or ¾ & Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -73. Solenoid/Pilot-Spring Return (S) ap ssembly (XPilot) (Pilot) or ⅛ Thru ½ Valves (XPilot) (Pilot) or ¾ & Valves This ap ssembly is denoted in the prefix letters of the valve product no. by the letter and suffix detail -38. ⅛ PIOT PORT ⅛ PIOT PORT 64

65 VRS ockout Valves OUR O-POST OOUT VV Three-Way, Palm utton ctuated, /8, /4, 3/8, /2, 3/4,, /4 NPT or Sideported Or Subplate ounting Styles XPS Sideported OV* valve Subplate mounted OV* valve Panel mounted OV* valve OW SYO Operating Pressure Range: 0 to 200 psig (4 bar) O POSITION (NO PUS ) onstruction: ainly forged & machined brass, plated steel screws, NR (nitrile) seals. luminum subplates when required. right red knob and gold body make valve singularly identifiable. ock Requirement: Up to four padlocks with ¼ (6.4mm) min to ⅜ (9.5mm) max diameter shackle, or up to four hasps with ¼ (6.4mm) min to ⅜ (9.5mm) max diameter shackle to which several locks each may be attached. olor coded indicator shows red when inlet is connected to outlet (), blue when connected to exhaust. X POST (4 PS) OR PO(S) (2 OUNT OS) TRV X X INSIONS Valve /8 & / (79) 2.00 (5).63 (4).59 (40.4) Inches (mm) 3/8 & 3/4,, /2 ¼ 8.59 (28) 2.75 (70).69 (43) 2.25 (57.2) (27.8) (47.8) 0.66 (6.8).3 (33.3) 0.26 (7) 0.50 (3) VRS U.S../ N..00 (25.4) 2.00 (56.8) 0.33 (8.4) 0.50 (3).88 (302) 3.75 (95) 2.44 (62) 3.3 (79.4) 2.75 (70).50 (38.) 3.00 (76.2) 0.39 (0) 0.63 (6) ockout & xhaust Valves (OV) - ock in exhausting position only. eets OS requirements. PROUT NUR Sideported Subplate ounted 3 Port Size Port Size Valve (NPT ) v Valve Subplate (NPT ) v VIZ-320-OV, 2 ⅛.4 VIZ-33-OV, ⅛.3 VIZ-330-OV, 2 ¼ ¼.7 VIZ-340-OV, 2 ⅜ ⅜.8 VIZ-350-OV, 2 ½" 4 VIZ-35-OV, ⅜ 3.2 VIZ-360-OV, 2 ¾" ½ 3.8 VIZ-370-OV, 2 " ¾ 4 or valves that can be locked in pressurizing or exhausting position substitute - OV. This option does not meet OS requirements for a OOUT valve because it can be locked in pressurizing position. xample VIZ-330-OV. 2 or a valve with panel-mounting thread and nut, add - P, for example: VIZ-330-OV-P, or VIZ-330-OV-P. VIZ-37-OV, ¾ ¼. 3 ll OV* subplates have locating pins to prevent incorrect installation of valve. or corresponding threads, add suffix -2 in product number. ⅛ to ½ (sideported valve) ⅛ to ¼ (subplate). onsult factory for availability. 65

66 VRS SPI PURPOS U SONOI VVS Push Pull Solenoid eneral escription Suffix -PP dual solenoid valve with a hand lever. The design concept is to provide the functionality of a, dual coil, 2-position valve with the addition of manual control or any other actuator. The valve operates as standard 2-position requiring only momentary electrical contact to shift valve. Various manual actuators are available. The lever shown is a - type which can be manually set in either offset position when the solenoid valve is de-energized. Redundant Solenoid 2oo2, Suffix -RS eneral escription When parallel electronic control circuits are utilized in a system, if a complete control circuit fails or requires maintenance, the parallel circuit will keep the system running. In a parallel circuit Versa s Redundant Valve functions the same as a solenoid operated-spring return valve, except that it has two solenoids (one for each of the parallel circuits) rather than one solenoid. ither or both of these solenoids will shift and maintain the controlled device in the shifted position. oth solenoids must be de-energized to return the controlled device to the un-shifted position. The use of one Redundant Valve can replace multiple valves and components to accomplish the same function. This function can be considered as a (2oo2). Shut off Valve oo2, Suffix -SOV eneral escription While the Shut off Valve looks similar to the Redundant Solenoid Valve (shown above) the internal pilot circuit is different. The -SOV option provides a series pilot control circuit that requires both coils, a primary and a secondary, to be energized in order for the valve to shift. onversely if the electrical signal to either coil is removed the valve will return to the de-energized position. This function can be considered as a (oo2). Where various control devices (e.g., temperature, pressure switches) could be wired in series with each coil. The actuation of any one of these devices, attached to either coil, would interrupt the signal to the coil and cause the valve to shift to the deenergized position. -PP low Schematic -RS low Schematic -SOV low Schematic 66

67 X X VRS SPI PURPOS U SONOI VVS ow to specify SPI PURPOS U SONOI VVS V S RS (OPTIONS) V = V Series brass = -PP with ever I = -PP with utton = -PP with atch, see page 68 S = -RS -SOV with Spring Return = -RS -SOV with atch, see page 68 3 = Three-way 4 = our-way 2 = /8 NPT (Series V ** ) 3 = /4 NPT (Series V ** ) or V36) 4 = 3/8 NPT (Series V ** ) or V36) 5 = /2 NPT (Series V ** ) or V36) 2 = Threaded sideports-pilot solenoid: no auxiliary pilot required. = 3-way N 2 = 3-way NO, 4-way/2-position 3 = 4-way/3-position (blocked center) 4 = 4-way/3-position (exhaust ports open in center) dd 36 for stainless steel valves. eave blank for brass SPI PURPOS U SONOI VVS SUIX -RS -SOV -PP OPTIONS (Refer to pages 9 to for specific certifications, standards & classifications, approvals, protective codes and voltage codes.) ** Valves with ISO 228 Threads are designated by utilizing suffix -2 in model number. Installation, iltration nd ubrication Valves have no limitations on mounting orientation. 40 to 50 micron filtration and general purpose lubricating oil ISO, ST viscosity grade 32 recommended. mbient temperature range -0 (-23 ) to 200 (95 ). imensions 24"(60mm) S 24 24"(60mm) ROUN (RN) /2" NPT ONUIT ONNTION (2) Ø.33 (3 OUNT 8,3 OS) 24"(60mm) S (TYP) 24"(60mm) ROUN RN (TYP) /2" NPT (5 PORTS) /2" NPT ONUIT ONNTION (.5 TYP) 38, TYP (4,6) Ø (3 OUNT OS) R S or S O V 3 W Y 4 W Y SIZ SIZ in /8 & /4 3 /8 & mm W / in /8 & /8 & /2 P mm Y / P in /8 & /8 & /4 mm W / in /8 & /8 & /2 mm Y / imensions listed are for -XX type hazardous service solenoids. or dimensions with other hazardous service solenoids that can be applied, consult factory. imensions for standard non-hazardous service solenoids will be slightly less than those listed. 67

68 VRS T/NU RST VVS atching valves are particularly suited to applications where it is desirable or mandatory to manually reset or restart a system. typical application could involve the emergency shutdown of automatically monitored process operations. oss or interruption of the control signal to the valve actuator causes the valve to shift, latch and shut-down a process step. When the signal is restored the valve remains in the latched position until the operator manually unlatches it and allows the process step to resume. Positive latching in such an application is vitally important since many process operations are sequential and one step must not be started until the one ahead of it has started. This example is only one of many which can be accommodated through the use of Versa s atching Valves. wide range of functional types, port sizes, actuators, and latching arrangements provide the engineer with a complete choice of valving to suit his particular needs. The atching evice actuator consists integral spring for returning the valve plunger, and an inline hand operator atching/anual Reset Three-Way Valve, anifold ounted, Solenoid ctuated. (V XX-024 shown above where needed to manually shift the valve. The specific atching evice may be attached to any Series V valve body size or style up to. Typically the actuator on the opposite end of the valve body would be an automatic type such as a solenoid, a remote pressure pilot, or a low pressure diaphragm actuator. TS TUT POSITION Series V, Suffix -8 atches automatically when plunger shifts on signal. Unlatching allows plunger to be returned by hand. TS UNTUT POSITION Series V, Suffix -8 Unlatching allows plunger to shift on signal. If signal is lost, spring shifts plunger automatically and valve latches. When signal is restored, plunger will not shift until manually unlatched. and lever is provided for manual operation. (If hand lever is not required see suffix below.) TO RST P U TO RST P U Series V, Suffix -8 Series V, Suffix atches automatically when plunger shifts on signal. Unlatching allows spring to reset plunger automatically. and lever provided for manual operation. (If hand lever is not required see suffix below.) atches automatically when plunger shifts on signal. Unlatching allows spring to reset plunger automatically. (If hand lever is required for manual actuation see suffix -8 above.) TO RST P U 68 TO RST P U Series V, Suffix Series V, Suffix -8 Series V, Suffix -8 Unlatching allows plunger to shift on signal. Spring returns plunger automatically and valve latches. (If hand lever is required for manual actuation see suffix -8 above.) TS ITR POSITION (2 position latch) Valve may be manually latched in either offset position or left unlatched. cts as spring return valve when not latched. and lever is provided for manual operation.. TO RST P U TO RST P U (3 position latch) Valve may be latched in either offset position or in center position. cts as spring return valve when not latched. and lever is provided for manual operation.

69 T/RST VVS ow to specify SRIS V VVS V (OPTIONS) V = Pneumatic service: vacuum to 200 psi (4 bar) = Solenoid/pilot operated (N,2,3) (2N, 3N, 4-way, 5-way, Selector, iverter) P = Remote pressure pilot operated (2N, 3N, 4-way, 5-way, Selector, iverter) W= iaphragm (low pressure) pilot operated (2N, 3N, 4-way, 5-way, Selector, iverter) = Solenoid/pilot operated (N,2,3) (2NO, 3NO, Selector, iverter) P = Remote pressure pilot operated (2NO, 3NO, Selector, iverter) W = iaphragm (low pressure) pilot operated 2NO, 3NO, Selector, iverter) 2 = Two-way 3 = Three-way 4 = our-way 5 = ive-way 7 = iverter (one inlet-two outlets) 8 = Selector (two inlets-one outlet) 2 = /8 NPT* 3 = /4 NPT* 4 = 3/8 NPT* 5 = /2 NPT* 6 = 3/4 NPT 7 = NPT *or corresponding thread, also use suffix -2 as option 0 = Threaded side ports - or all type actuators: or controlling vacuum to 200 psi (4 bar) air and where controlled medium or source is different than pilot medium or source. Solenoid/pilot or remote pressure pilot requires aux pilot pressure psi (3.8-2 bar) air. iaphragm pilot requires aux pilot pressure 5-50 psi (-3.4 bar) air. = Subplate mounted ports - or all type actuators: or controlling vacuum to 200 psi (4 bar) air and where controlled medium or source is different than pilot medium or source. Solenoid/pilot or remote pressure pilot requires aux pilot pressure psi (3.8-2 bar) air. iaphragm pilot requires aux pilot pressure 5-50 psi (-3.4 bar) air. 2 = Threaded side ports - Pilot solenoid only: or controlling pressures psi (3.8-2 bar) air. No auxiliary pilot required. 3 = Subplate mounted ports - Pilot solenoid only: or controlling pressures psi (3.8-2 bar) air. No auxiliary pilot required. = 2N, 3N 2= 2NO, 3NO, 4-way two position, 5-way two position, Selector, iverter 3= Three-position, 3, 4, 5-way, Selector, iverter,-all ports closed in center position. 4= Three-position, 3, 4-way, exhaust ports open in center position ocking/reset device (refer to page 68 for specific device required) OPTIONS -XX = Solenoid operator for hazardous service (N 7 & 9); lass I, ivision 2 ( & ); lass I, ivision ( & ); lass II, ivision (, & ) = ow watt (.8W) solenoid operator for hazardous service (N 7 & 9) ax operating pressure 20 PSI (8.3 bar) onsult factory for specific certifications, standards & classifications, approvals, and protective codes. 69

70 VRS Series V Oil-ree Service Valves Ideal for permanently lubricated cylinders Needs no airline lubricator* elps in meeting OS requirements WN TO US T Whenever oil or lubricators cause problems: In vacuum service Where air flow is too low due to small cylinders or infrequent cycling Where lubricator cannot be properly positioned In food and beverage plants In food applications, specify suffix for valve prelubricated with an approved grease. *ike any moving device, a valve lasts longer with lubrication. (Refer to Page 7 for lubricant recommendations). Use Oil-ree Service valves only when necessary. iltration is always recommended. OW TO SPIY OI-R SRVI VVS I. I T RQUIR VV IS: a. Three-Way-normally closed or our-way, N it is b. Single solenoid (VS) Pilot or single pressure pilot (VSP) actuated, N it is c. Spring return, N it d. oes not require the ustproof option (- or -) then e. Specify by adding suffix -3530S to the product number. II. I T RQUIR VV IS: a. Other than described in I. (at left), then b. Specify by adding suffix-3530 to the product number. SUR TO OSRV T PRSSUR IITTIONS IST OR T SPII SUIX TI ST. SUIX-3530S Series V Valve Single Solenoid (VS-Pilot) or SUIX-3530 Single Pressure Pilot (VSP) operated, without dustproof Series V Valve other than those listed for suffix-3530s option. or others specify /8 thru NPT and /8 thru /2 /8 thru /2 NPT or 2, 3, 4 or 5-way, selector, or diverter 3N or 4-way Suffix-3530S includes STIR ir ssisted spring. OPRT PRSUR RN OR SUIX It combines spring force, constantly applied, with a pilot assist, automatically applied on return only. TUTION RTURN anual or echanical Spring or Spring entering ONTRO PRSSUR Vacuum to 200 psi (4 bar) IU UX. PIOT PRSSUR RQUIR N/ X X onsult factory before using cylinder speed controls on STIR (ir ssisted) spring return equipped valves in high-cycle-rate applications. OPRT PRSSUR RN OR SUIX -3530S Pressure Pilot or Solenoid pilot (XPilot) Pressure Pilot or Solenoid pilot (XPilot) Spring or Spring entering Pressure Pilot or Solenoid pilot (XPilot) Vacuum to 200 psi (4 bar) Vacuum to 200 psi (4 bar) 60 psi (4 bar) ± 0% 30 psi (2 bar) ± 0% VSP: 60 psi (4 bar) ± 0% to 200 psi (4 bar) VS-(Pilot): 60 psi(4 bar) ± 0% to 75 psi (2 bar) Return spring or STIR (ir ssisted) return spring on spring return models. Plated internal body parts reduce friction and wear. Standard size O Rings. Solenoid pilot (Pilot) Solenoid pilot (Pilot) Solenoid-pilot actuator. Spring or Spring entering Solenoid pilot (Pilot) 60 psi (4 bar) ± 0% to 75 psi (2 bar) 30 psi (2 bar) ± 0% to 75 psi (2 bar) N/ N/ Resilient seals eliminate metal-to metal rubbing. Pilot-piston U ups. utaway shows side-ported Oil-ree Service Series V one of many models in the Versa line. 70

71 STSS ST T ORR ORTION Order any -36, -36, T, V or V-36 valve. s a separate line item (listed directly under valve part number to be tagged) list the tag part number P NV28. In remarks field specify the tag marking instructions. If sequential numbering is required provide the start and end numbers required in the sequence for the appropriate number of valves. RPIR ITS The Repair its listed below contain all the parts necessary to restore a valve to prime operating condition. ecause these are universal kits, some parts may not require use in all valves. ngraving Options Versa's engraved tags are available in two configurations. onfiguration one: is a simple text field 2.25 consisting of two lines of text, 20 characters OI maximum per line. The text can be specified as P/N SV 966 alpha, numeric or both. onfiguration two: is a text field with sequential numbering added. This option includes two lines of text. ine one is text. ine two allows for sequentially numbering the tag, 20 characters maximum per line. OI P/N SV 966 ield for Sequential haracters Where applicable, solenoid operator parts, not including coils, are also included. oils may be ordered separately, See heading oils at the bottom of this page. 0.5 VV SIZ and, oot, am, Pilot ctuated Valves OR SRIS V VVS Solenoid/Pilot ctuated Valves (Nonhazardous Service)* 2-Position 2 & 3-Position Single Solenoid ouble Solenoid iaphragm ctuated Valves 2-Position 2 & 3-Position /8 & /4 V-4332 V V V-4302-W-3 V-4302-WW-3 3/8 & /2 V-4532 V V V-4502-W-3 V-4502-WW-3 3/4 & V-4732 V V V-4702-W-3** V-4702-WW-3** -/4 V V V *or azardous Service Valves, consult factory. **or iaphragm valves without option 3 use V-4702-W and V-4702-WW respectively. Seal aterial Options The following seal materials can be specified as an option. Indicate by placing the Suffix Option designation after the appropriate product number shown above. or example: V-4332 [standard NR (nitrile) seals] becomes V (fluorocarbon seals). Suffix Option -P PR (ethylene propylene) elastomeric seals for phosphate ester type hydraulic fluids, acids, weak caustics, methyl ethyl ketone, silicone greases and oils. onsult factory for other uses. Not for petroleum base fluids or lubricants, or hydrocarbon solvents. - NR (high nitrile) seals for petroleum base and silicate ester hydraulic fluids, high and low aniline lubricating oils, sweet natural gas, ammonia. Static and dynamic seals, except for piston seal, are furnished in special compound. Piston seal is standard. -55 (fluorocarbon) elastomeric seals Solenoid Plunger One size solenoid plunger fits all Series V or T valves regardless of valve size. xceptions to this are valves for hazardous service. onsult factory for these items. Solenoid plungers are included in the Universal Repair its for solenoid valves. owever, should you require only the solenoid plunger you may order same by using the following part number: P P P P P Option -P) oils Standard NR (nitrile) seal (fluorocarbon) seal (Suffix Option -3 & -55) NR (high nitrile) seal (Suffix Option -) PR (ethylene propylene) seal (Suffix One size coil fits all Series V or T valves regardless of valve size. xceptions to this are valves with suffix options -, -P, -P, -PS & valves for hazardous service. onsult factory for these items. To specify a coil as a single part use the following part number: P (oil ode from Page 9). or example, to indicate a standard 20v60 coil, the part number would be P

72 WRNS RR T S PPITION, STTION N SRVI O VRS PROUTS The warnings below must be read and reviewed before designing a system utilizing, installing, servicing, or removing a Versa product. Improper use, installation or servicing of a Versa product could create a hazard to personnel and property. S PPITION WRNS Versa products are intended for use where compressed air or industrial hydraulic fluids are present. or use with media other than specified or for non-industrial applications or other applications not within published specifications, consult Versa. Versa products are not inherently dangerous. They are only a component of a larger system. The system in which a Versa product is used must include adequate safeguards to prevent injury or damage in the event of system or product failure, whether this failure be of switches, regulators, cylinders, valves or any other system component. System designers must provide adequate warnings for each system in which a Versa product is utilized. These warnings, including those set forth herein, should be provided by the designer to those who will come in contact with the system. Where questions exist regarding the applicability of a Versa product to a given use, inquiries should be addressed directly to the manufacturer. onfirmation should be obtained directly from the manufacturer regarding any questioned application prior to proceeding. STTION, OPRTION N SRVI WRNS o not install or service any Versa product on a system or machine without first depressurizing the system and turning off any air, fluid, or electricity to the system or machine. ll applicable electrical, mechanical, and safety codes, as well as applicable governmental regulations and laws must be complied with when installing or servicing a Versa product. Versa products should only be installed or serviced by qualified, knowledgeable personnel who understand how these specific products are to be installed and operated. The individual must be familiar with the particular specifications, including specifications for temperature, pressure, lubrication, environment and filtration for the Versa product which is being installed or serviced. Specifications may be obtained upon request directly from Versa. If damages should occur to a Versa product, do not Operate the system containing the Versa product. onsult Versa for technical information. IIT WRRNTY ISIR N IITTION O RIS Versa s Series products are warranted to be free from defective material and workmanship for a period of ten years from the date of manufacture, provided said products are used in accordance with Versa specifications. Versa s liability pursuant to that warranty is limited to the replacement of the Versa product proved to be defective provided the allegedly defective product is returned to Versa or its authorized distributor. Versa provides no other warranties, expressed or implied, except as stated above. There are no implied warranties of merchantability or fitness for a particular purpose. Versa s liability for breach of warranty as herein stated is the only and exclusive remedy and in no event shall Versa be responsible or liable for incidental or consequential damages. Versa Products ompany Inc. 22 Spring Valley Road Paramus, New ersey US Phone: (20) ax: (20) Versa V Prins Willem lexanderlaan peldoorn The Netherlands Phone: ax: sales@versa-valves.com