Series 8000 Air Actuated Valves for liquid service

Transcription

1 ssembly Numbers Series 8000 ir ctuated Valves for liquid service P - 1 To determine the configured item number: Select one choice from each of the following five categories onfigured Item Number Valve size Flow capacity Pressure rating Normal position rea classification Valve size (N 10) (N 15) (N 20) (N 25) (N 32) (N 40) (N 50) Flow capacity - igh S - Standard Pressure rating 80 - Pneumatic standard pressure 81 - Pneumatic high pressure Normal position 3 - Normally-closed liquid shut-off valve rea classification 1 - General purpose 2 - Non-incendive lass I, II and III ivision Intrinsically safe, lass I, II and III ivision 1 (and TEX Zone 2/22 when ordered with the TEX IS solenoid) (see note 1) 4 - Valve body only Note 1: 122 F maximum ambient temperature limit Example: To order a 1 body, high pressure rating, normally closed shut-off valve for general purpose use, make the following selections: Valve size Flow capacity...s Pressure rating...81 Normal position...3 rea classification...1 The configured item number for this valve is: 100 S 8131 Segment choices for Series 8000 ir ctuated Valves for liquid service are shown on the following pages.

2 P - 2 E - i - 8/15 Segment choice detail NOTE: Some choices may not be available with all sizes and types of valves. Segment name Segment description Segment choices (EFULT is shaded) Segment choice description MOEL NUMER 1 alculated --- MOEL NUMER 2 alculated --- SIZE etermined by configured alculated --- FLOW PITY item number selection (see alculated --- PRESSURE RTING page P-1) alculated --- NORML POSITION alculated --- RE LSSIFITION alculated --- * (*) ctuator only () NSI (NPT) threaded () NSI flanged () ISO 7/1 threaded E (E) Socket welded nipples OY ONNETION Type of body connection F (F) Socket welded nipples w/150# flange (PN20) G (G) Socket welded nipples w/300# flange (PN50) () EN PN10/PN16 flange I (I) Socket welded nipples w/600# flange (PN110) J (J) utt weld nipples OY SELS & STEM PKING OY MTERIL INTERNL TRIM Material specification for valve body seals and stem packing Type of valve body material Materials used for valve body internal components * (*) ctuator only () una-n w/teflon () Viton w/teflon () Ethylene-Propylene w/teflon () Kalrez w/grafoil * (*) ctuator only 1 (1) ast iron 2 (2) arbon steel * (*) ctuator only () uctile () Stellite P (P) PEEK

3 P - 3 Segment name PRIMRY VOLTGE SWITES ENLOSURE RTING INSTRUTION LNGUGE VISUL INITION FUEL TOP SSEMLY POSITION Segment description Electrical voltage-actuator Switch options desired, if any Rating of actuator enclosure Language for valve instructions hoice of color scheme for visual indicator Type of fuel to be used ctuator position Segment choices Segment choice description (EFULT is shaded) () 120v 50hz () 120v 60hz () 240v 50hz E (E) 240v 60hz G (G) 24v () 24v - intrinsically safe 0 (0) None 1 (1) VOS1/VS1 - GP switches 2 (2) VOS2/VS2 - GP switches 3 (3) VOS1/VS1 - IP67 switches 4 (4) VOS2/VS2 - IP67 switches () NEM 4, IP65 () NEM 4X, IP65 0 (0) English 1 (1) French 3 (3) German 1 (1) Red closed / green open 2 (2) Green closed / red open 3 (3) lack closed / yellow open MM mmonia (anhydrous) UTL utane (liquid) ETL Ethanol (ethyl alcohol) JP4 JP4 KERO Kerosene METL Methanol (methyl alcohol) NO1OIL No. 1 fuel oil NO2OIL No. 2 fuel oil NO4OIL No. 4 fuel oil (125 ssu max) NO5OIL No. 5 fuel oil (900 ssu max) NO6OIL No. 6 fuel oil (2500 ssu max) NO6OIL No. 6 fuel oil (7000 ssu max) PROPL Propane (liquid) RESI Residual oil (15000 ssu max) STEM Steam W way L Left R Right TO Toward

4 P - 4 E - i - 8/15 Segment name Segment description Segment choices (EFULT is shaded) Segment choice detail LW luminum (wire-on) TGGING Type of tagging NONE No tagging SSP Stainless steel (permanent) SSW Stainless steel (wire-on) MINIMUM FLUI TEMPERTURE (F) No choices available alculated --- () 100F (38) () 150F (66) () 200F (93) () 250F (121) MXIMUM FLUI TEMPERTURE Maximum fluid temperature capabilities MIN YL INLET PRESS (PSIG) No choices available alculated --- MIN MIENT TEMPERTURE (F) No choices available alculated --- MX MIENT TEMPERTURE (F) No choices available alculated --- MOP (PSIG) No choices available alculated --- SOLENOI URRENT/POWER RTING No choices available alculated --- GENY SNTIONS No choices available alculated --- E F G I J (E) 300F (148) (F) 350F (177) (G) 400F (204) () 450F (232) (I) 500F (260) (J) 550F (288)

5 P - 5 omplete switch assembly w/terminal blocks and leads mounted Nominal valve size Flow capacity Ref. model number ssembly numbers General purpose & lass I, iv. 1 IP67 - lass I, iv. 2 VOS1/VS1 VOS2/VS2 VOS1/VS1 VOS2/VS2 3/8 S 038 S 81_ /2 S 050 S 81_ /4 S 075 S 81_ S 100 S 80_ S 100 S 81_ /4 S 125 S 80_ /4 S 125 S 81_ / _ / _ /2 S 150 S 80_ /2 S 150 S 81_ S 200 S 80_ S 200 S 81_ Individual mounted switch assembly w/leads mounted Nominal valve size Flow capacity Ref. model number ssembly numbers General purpose & lass I, iv. 1 IP67 - lass I, iv. 2 3/8 S 038 S 81_ /2 S 050 S 81_ /4 S 075 S 81_ S 100 S 80_ S 100 S 81_ /4 S 125 S 80_ /4 S 125 S 81_ / _ / _ /2 S 150 S 80_ /2 S 150 S 81_ S 200 S 80_ S 200 S 81_

6 P - 6 E - i - 8/15 Solenoid coil w/quick exhaust assembly escription ssembly number Ref. number General purpose and lass I, iv. 2, 120V 50/60 z General purpose and lass I, iv. 2, 240V 50/60 z General purpose and lass I, iv. 2, 24V General purpose and lass I, iv. 2, 120V 50/50 z and -58F min fluid temp General purpose and lass I, iv. 2, 240V 50/60 z and -58F min fluid temp General purpose and lass I, iv. 2, 24V and -58F min fluid temp General purpose and lass I, iv. 1, 24V TEX certified and -58F min fluid temp Intrinsically safe for lass I, iv. 1, 24V Intrinsically safe for lass I, iv. 1, 24V TEX certified ccessories escription ssembly number arbon steel speed control set kit Stainless steel speed control set kit Solenoid barrier for intrinsically safe Switch barrier for intrinsically safe Solenoid isolator for instrinsically safe Switch isolator for intrinsically safe

7 P - 7 omplete visual indication top assembly To order, enter configured item number: REPL 8000 VI TOP NOTE: Some choices may not be available with all sizes and types of valves. Segment Name Segment escription Segment hoices (EFULT is shaded) Segment hoice escription ORIGINL MOEL NUMER 1 Original valve designation alculated (038) N (050).5 -- N (075) N (100) 1 -- N (125) N32 SIZE Original valve size 150 (150) N (200) 2 -- N (250) N (300) 3 -- N (400) 4 -- N (600) 6 -- N (800) 8 -- N200 () P flow FLOW PITY Original flow capacity () igh flow S (S) Std flow PRESSURE RTING Original pressure rating 80 (80) Pneumatic std pressure 81 (81) Pneumatic high pressure 1 (1) Shut-off valve NORML POSITION Original valve type 2 (2) Vent valve 3 (3) Liquid shut-off valve RE LSSIFITION INSTRUTION LNGUGE VISUL INITION Original hazardous location designation Original language for valve instructions Original choice of color scheme for visual indicator 1 (1) General purpose 2 (2) lass 1, iv. II 3 (3) lass 1, iv I 0 (0) English 1 (1) French 3 (3) German 4 (4) Portuguese 5 (5) Spanish 1 (1) RE closed/grn open 2 (2) GRN closed/ RE open 3 (3) LK closed/yl open