Service & Maintenance

Transcription

1 CC-0 Basic Loader Parts CC-0 LOADER TOWER REPLACEMENT PARTS XCT-AS TOWER XAT-AS LATCH XAF- LINKAGE PIN HHS000 /" X /" BOLT HTN0 /" LOCK NUT RLP0000 /" ROLL PIN XAF- PIN ZER0 GREASE FITTING. WESTENDORFMFG PWB0 WESTENDORF MFG CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

2 CC-0 Basic Loader Parts 0 0 * XCF- KIT CC-0 LOADER FRAME REPLACEMENT PARTS REF # PART # DESCRIPTION QTY. XCF-AS FRAME XCF-0 BUCKET LINKAGE XCF-0AS PIVOT STRAP XCF-AS BUCKET LINKAGE XCF-AS SELF LEVELING TUBE XCF-AS - R INSIDE SELF LEVELING PLATE (RIGHT) XCF-AS - L INSIDE SELF LEVELING PLATE (LEFT) XCF-0AS - R OUTSIDE SELF LEVELING PLATE (RIGHT) XCF-0AS - L OUTSIDE SELF LEVELING PLATE (LEFT) 0 XCF-AS CROSS PIPE CAP XCF- KEYED PIN XCF-AS LOCK PIN XCF- PIN LAC-- ROTATIONAL BUCKET INDICATOR NOTE: * When ordering replacement pin, order XCF- KIT. XCF- KIT includes (), (), (), (), (), and (). LAC--0 ROTATIONAL HEIGHT INDICATOR FMT-0 PIN LOCK FMT-0 HOLD DOWN LMF-AS PIVOT PIN LMF-AS ROUND HEAD PIN 0 XAF- LINKAGE PIN LW- INSERT BUSHING HHS00 /" X " BOLT RLP0000 /" ROLL PIN DRP0000 DOUBLE ROLL PIN SR-B /" O.D. WIRE RING SR-C0 SNAP RING ZER0 GREASE FITTING LWM0 /" LOCK WASHER WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH:() - FAX: () -0 sales@westendorfmfg.com

3 0 CC-0 Rotational Indicators ROTATIONAL BUCKET INDICATOR 0 LAC-- GRD-0AS BUCKET INDICATOR GRD-AS POINTER GRD-0 GAUGE ROD HOLDER XCF- GAUGE ROD DE-GRD DECAL GRD-AS TEAR DROP BRACKET SR-C0 HHS000 SNAP RING /" X /" BOLT HTN0 /" LOCK NUT 0 AHS000 /" X /" ALLEN HEAD SET SCREW CTK0000 /" X " COTTER KEY NOTE: *Order LAC-- when ordering a complete Rotational Bucket Indicator Kit. 0 ROTATIONAL HEIGHT INDICATOR 0 LAC--0 REF # PART # DESCRIPTION QTY GRD-AS HEIGHT INDICATOR GRD-AS POINTER DE-GRD DECAL BUS-0 BUSHING BUS-0 BUSHING BUS-0 INSERT BUSHING LM- NYLON BUSHING XAF- PIN ZER0 GREASE FITTING 0 SHS000 /" X /" SQUARE HEAD SET SCREW AHS000 /" X /" ALLEN HEAD SET SCREW RLP0000 /" ROLL PIN HHS00 /" X " BOLT CBF00 /" X /" CARRIAGE BOLT HTN0 /" LOCK NUT NOTE: *Order LAC--0 when ordering a complete Rotational Height Indicator Kit. WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

4 CC-0 Buckets and Couplers BUCKET Q0 " BUCKET * 0Q 0" BUCKET * CB- " BLADE * UB- 0" BLADE * NOTE: *Check width of the bucket and use the part number that matches. If your size is not shown, contact Westendorf Mfg. Co. NOTE: 0Q is not a tapered bucket. SNAP-ATTACH COUPLER (C-B) 0 QC-0COM MALE COUPLER QC-0AS MALE COUPLER HHS00 /" X " BOLT QC-AS LATCH HANDLE HTN0 /" LOCK NUT QC- LATCH QC- SPRING QC- BOTTOM LATCH PIN XAF-AS LINKAGE PIN 0 LF- LINKAGE PIN DRP0000 DOUBLE ROLL PIN DRP0000 DOUBLE ROLL PIN RLP00000 /" X /" ROLL PIN ZER0 GREASE FITTING NOTE: Qty. shows number of parts received if ordered using listed part numbers. C-B is two (QC-0COM) couplers. COSMETICS DEC-0 DECAL KIT V--A BLACK SPRAY PAINT V--A ELECTRIC ICE SPRAY PAINT V--P PINT ELECTRIC ICE PAINT V--P PINT BLACK PAINT REF # PART # DESCRIPTION QTY V--Q QUART ELECTRIC ICE PAINT V--Q QUART BLACK PAINT V--G GALLON ELECTRIC ICE PAINT V--G GALLON BLACK PAINT NOTE: Warning decals are available at no charge. If they become damaged or missing, order part numbers DE-SS, DE-WLD-A, DE-WLD-A, DE-LD, DE-PP, and DE-QCC. WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

5 CC-0 Bucket Cylinder STEPS TO REPAIR CYLINDER ) At the ram end of the cylinder barrel, remove the spiral retaining ring from the top of the gland. NOTE: The G-E gland does not use the spiral retaining ring. ) Gently drive the gland into the barrel using a brass or nonmarring punch until the round retaining ring is visible. ) Remove the round retaining ring using a pair of long nose pliers. Remove the ram assembly (ram, gland, and piston) from the barrel. ) Notice the direction they're pointing so they can be properly re-assembled. ) Remove the jam nut and/or hex nut from the end of the ram. ) Remove the old seals and rings and replace them with the new seals and rings. (Seal kits are packaged for several different cylinders. You may have extra parts) ) Clean cylinder with cleaner and a clean lint free cloth. ) Lubricate the seals and rings to aid assembly. ) Assemble the cylinder by reversing the order. CYLINDER REPAIR TIPS When disassembling cylinders, keep the parts in correct orientation. Remove parts in sequence. Note the direction of the piston and gland. Lay out old seals and parts as they are removed. Assemble cylinder in proper order; lubricate to aid assembly. BUCKET CYLINDER REPLACEMENT PARTS B- BUCKET CYLINDER B-0 BARREL B-0 RAM G-W GLAND P-B PISTON HJN " JAM NUT HFN " NUT ZER0 GREASE FITTING #CK SEAL KIT * NOTE: * Seal kit contains parts to repair one cylinder. WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

6 CC-0 Lift Cylinder STEPS TO REPAIR CYLINDER ) Extend the ram out as far as possible. ) At the ram end of the cylinder barrel you will find a snap ring located either on the face of the gland or inside the notch of the gland. ) Locate the snap ring eyes (you may need to turn the gland inside the barrel to find the snap ring eyes). Compress the snap ring with snap ring pliers. ) Remove the ram assembly (ram, gland, & piston) from barrel. ) Notice the direction they are pointing so they can be properly re-assembled. ) Remove the piston and gland from the ram. ) Remove the old seals and rings and replace them with the new seals and rings. (Seal kits are packaged for several different cylinders. You may have extra parts) ) Clean the cylinder with cleaner and a clean lint free cloth. ) Lubricate the seals and rings to aid assembly. 0) Assemble the cylinder by reversing the order. CYLINDER REPAIR TIPS When disassembling cylinders, keep the parts in correct orientation. Remove parts in sequence. Note the direction of the piston and gland. Lay out old seals and parts as they are removed. Assemble cylinder in proper order; lubricate to aid assembly. LIFT CYLINDER REPLACEMENT PARTS L- LIFT CYLINDER L-0 BARREL L-0 RAM G-U GLAND P-Z PISTON LW- INSERT BUSHING #CK SEAL KIT * NOTE: * Seal kit contains parts to repair one cylinder WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

7 CC-0 Hydraulics 0 0 CC-0 HYDRAULICS PF-FFC FEMALE CONNECTOR H000-FF /" X 0" HOSE PF-FSBT SWIVEL NUT TEE OH- OIL LINE HOLDER OLT- OIL LINE OH- OIL LINE PROTECTOR OLT- OIL LINE HTN0 /" LOCK NUT OLT- OIL LINE BAND- METAL BAND OLT- OIL LINE SLV-A RELIEF VALVE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE 0 OLT- OIL LINE OLT-0 OIL LINE OLT- OIL LINE 0 OLT- OIL LINE PF-FMC00 MALE CONNECTOR OLT- OIL LINE PF--JU-S TEE H000-FF /" X 0" HOSE WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com