Service & Maintenance

Transcription

1 TA-0 Basic Loader Parts TA-0 LOADER TOWER & FRAME REPLACEMENT PARTS MCT-AS - R TOWER (RIGHT) MF-0 INSERT BUSHING MCT-AS - L TOWER (LEFT) MCF- SQUARE HEAD WASHER MCF-AS FRAME MT- SPACER WASHER QC-0AS BUCKET STOP CBF00 /" X /" CARRIAGE BOLT MF-0AS GAUGE ROD HOLDER HTN0 /" LOCK NUT MCF- GAUGE ROD FSS000 /" X " SOCKET HEAD CAP SCREW 0H0 FRONT WRAP WN NUT MAF- GAUGE ROD PIN CTK0000 /" X " COTTER KEY B-0 INSERT BUSHING ZER0 GREASE FITTING 0 B- INSERT BUSHING NOTE: * Varies by tractor (Standard Front Wrap is 0H0). NOTE: When using C- skid steer coupler, bucket stops are not needed. WESTENDORF MFG. CO., INC. PH:() - FAX: () -0 sales@westendorfmfg.com WESTENDORFMFG PWB0

2 TA-0 Buckets and Couplers TA-0 BUCKET REF # PART # QTY. 0Q0-SB 0" TAPERED BUCKET Q0-SB " TAPERED BUCKET 0QS 0" SKID STEER BUCKET (OPTIONAL) QS " SKID STEER BUCKET (OPTIONAL) MB- 0" BLADE IB- " BLADE MB- SIDE BLADE NOTE: *Check width of the bucket and use the part number that matches. If your size is not shown, contact Westendorf Mfg. Co. TA-0 QUICK COUPLER (C-) REF # PART # QTY C- COUPLER COMPLETE QC-0AS COUPLER QC-AS-R LATCH (RIGHT) QC-AS-L LATCH (LEFT) SBC00 /" X /" FLAT HEAD SCREW HTN0 /" LOCK NUT TA-0 OPTIONAL SKID STEER COUPLER (C-) C- SKID STEER COUPLER TA-0 COSMETICS REF # PART # DEC-0 V-0-A V--A DECAL KIT RED SPRAY PAINT BLACK SPRAY PAINT QTY. REF # PART # V--P V--Q V--G PINT BLACK PAINT QUART BLACK PAINT GALLON BLACK PAINT NOTE: Warning decals are available at no charge. If they become damaged or missing, order part numbers DE-DWWS, DE-WWWS, DE-PP, and DE-0.. QTY WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

3 TA-0 Hydraulics 0 TA-0 HYDRAULICS PF-FFC FEMALE CONNECTOR PF-FSBT SWIVEL NUT TEE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OLT-0 OIL LINE 0 OLT- OIL LINE OH- OIL LINE HOLDER OH- OIL LINE HOLDER HTN0 /" LOCK NUT H000-FF /" X 0" HOSE H000-FF /" X 0" HOSE H000-FF /" X 0" HOSE WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

4 TA-0 Cylinder STEPS TO REPAIR CYLINDER ) Extend the ram out as far as possible. ) At the ram end of the cylinder barrel you will find a snap ring located either on the face or inside the notch of the gland. ) Locate the snap ring eyes (you may need to turn the gland inside the barrel to find the snap ring eyes). Compress the snap ring with snap ring pliers. ) Remove the ram assembly (ram, gland, & piston) from barrel. ) Notice the direction they're pointing so they can be properly re-assembled. ) Remove the jam nut and/or hex nut from the end of the ram. ) Remove the old seals and rings and replace them with the new seals and rings. (Seal kits are packaged for several different cylinders. You may have extra parts) ) ) Lubricate Clean cylinder the seals with cleaner and rings and to a aid clean assembly. lint free cloth. REF # PART # QTY B- CYLINDER B-0 BARREL 0) Assemble the cylinder by reversing the order. B-0 RAM G-H GLAND P-C PISTON HFN " NUT ZER0 GREASE FITTING #CK SEAL KIT CYLINDER REPAIR TIPS When disassembling cylinders, keep the parts in correct orientation. Remove parts in sequence. Note the direction of the piston and gland. Lay out old seals and parts as they are removed. Assemble cylinder in proper order; lubricate to aid assembly. TA-0 BUCKET & LIFT CYLINDER REPLACEMENT PARTS NOTE: * Seal kit contains parts to repair one cylinder. WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

5 TA-0 Basic Parts 0 KVJ- VALVE REF # PART # QTY REF # PART # QTY VP--0 VALVE PLATE LM-0 MALE COUPLER VP--0 VALVE COVER EXH- " EXHAUST CLAMP OC-NB VALVE 0 STW00 /" X /" HEX HEAD SCREW VJ-0COM HANDLE KIT PF-PO0 /"- HEX HEAD PLUG DE-VJ DECAL (NOT SHOWN) LWM0 /" LOCK WASHER PF-OS00 SWIVEL ADAPTER HHS000 /" X /" BOLT PF-OA0 /" O-Ring - /" MALE ADAPTOR MANIFOLD NOTE: Hoses are included in the Bracket Mounting Instruction. PART # QTY MA- MANIFOLD. WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH:() - FAX: () -0 sales@westendorfmfg.com