Service & Maintenance

Transcription

1 TA- Basic Parts 0 0 TA- LOADER TOWER REPLACEMENT PARTS MDT-AS - R TOWER (RIGHT) HHS00 /" X /" BOLT MDT-AS - L TOWER (LEFT) HHS000 /" X /" BOLT MDT- SIDE RAIL SPACER 0 CBF00 /" X /" CARRIAGE BOLT MDT- LATCH CBF000 /" X " CARRIAGE BOLT 0H0 FRONT WRAP HTN0 /" LOCK NUT B-0 INSERT BUSHING HTN0 /" LOCK NUT BUS- BUSHING. WESTENDORFMFG PWB0 WESTENDORF MFG CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

2 TA- Basic Parts TA- LOADER FRAME REPLACEMENT PARTS MDF-0AS FRAME MDF-AS LINKAGE MDF-0 OUTSIDE PIVOT STRAP MDF- INSIDE PIVOT STRAP MF-0AS GAUGE ROD HOLDER RF- INNER GAUGE ROD B- INSERT BUSHING MAF- GAUGE ROD PIN CBF00 /" X /" CARRIAGE BOLT 0 HTN0 /" LOCK NUT CTK0000 /" X " COTTER KEY ZER0 GREASE FITTING. WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH:() - FAX: () -0 sales@westendorfmfg.com

3 TA- Buckets and Couplers TA- BUCKETS REF # PART # 0QS QS QS AB- IB- JB- DESCRIPTION 0" SKID STEER BUCKET " SKID STEER BUCKET " SKID STEER BUCKET 0" BLADE " BLADE " BLADE NOTE: *Check width of the bucket and use the part number that matches. If your size is not shown, contact Westendorf Mfg. Co. QTY. TA- SKID STEER COUPLER (C-) 0 TA- COSMETICS C- SKID STEER COUPLER QC-0AS COUPLER QC-00AS - R HANDLE (RIGHT) QC-00AS - L HANDLE (LEFT) QC-00 LINKAGE QC-0 LATCH QC- SPRING MF-0 INSERT BUSHING RLP00000 /" X /" ROLL PIN 0 HHS000 /" X /" BOLT HHS00 /" X " BOLT CBF000 FWW0 /" X " CARRIAGE BOLT /" FLAT WASHER LWM0 /" LOCK WASHER HTN0 /" LOCK NUT HTN0 /" LOCK NUT ZER0 GREASE FITTING REF # PART # DEC- DEC- V-0--A V--A V-0--P DESCRIPTION DECAL KIT (TA-) DECAL KIT (TA-) RED SPRAY PAINT BLACK SPRAY PAINT PINT RED PAINT QTY. V--P PINT BLACK PAINT V-0--Q QUART RED PAINT V--Q QUART BLACK PAINT V-0--G GALLON RED PAINT V--G GALLON BLACK PAINT NOTE: Warning decals are available at no charge. If they become damaged or missing, order part numbers DE-DWWS, DE-WWWS, DE-PP, DE-QCC, and DE-. WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

4 TA- Cylinders TA- BUCKET CYLINDER REPLACEMENT PARTS B- BUCKET CYLINDER B-0 BARREL B-0 RAM G-X GLAND P-A PISTON HFN " NUT ZER0 GREASE FITTING #CK SEAL KIT * NOTE: * Seal kit contains parts to repair one cylinder TA- LIFT CYLINDER REPLACEMENT PARTS L- LIFT CYLINDER L-0 BARREL L-0 RAM G-X GLAND P-A PISTON HFN " NUT ZER0 GREASE FITTING #CK SEAL KIT * NOTE: * Seal kit contains parts to repair one cylinder STEPS TO REPAIR CYLINDER ) At the ram end of the cylinder barrel, remove the spiral retaining ring from the top of the gland. NOTE: The G-E gland does not use the spiral retaining ring. ) Gently drive the gland into the barrel using a brass or nonmarring punch until the round retaining ring is visible. ) Remove the round retaining ring using a pair of long nose pliers. Remove the ram assembly (ram, gland, and piston) from the barrel. ) Notice the direction they're pointing so they can be properly re-assembled. ) Remove the jam nut and/or hex nut from the end of the ram. ) Remove the old seals and rings and replace them with the new seals and rings. (Seal kits are packaged for several different cylinders. You may have extra parts) ) Clean cylinder with cleaner and a clean lint free cloth. ) Lubricate the seals and rings to aid assembly. ) Assemble the cylinder by reversing the order. CYLINDER REPAIR TIPS When disassembling cylinders, keep the parts in correct orientation. Remove parts in sequence. Note the direction of the piston and gland. Lay out old seals and parts as they are removed. Assemble cylinder in proper order; lubricate to aid assembly.. WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

5 TA- Hydraulics 0 TA- HYDRAULICS PF-FFC FEMALE CONNECTOR PF-FSBT SWIVEL NUT TEE OLT-0 OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE 0 OH- OIL LINE HOLDER OH- OIL LINE HOLDER OH- OIL LINE HOLDER OH- OIL LINE HOLDER HTN0 /" LOCK NUT H000-FF /" X 0" HOSE H000-FF /" X 0" HOSE. WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com